summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorJouni Malinen <jouni@qca.qualcomm.com>2011-08-10 23:54:35 +0300
committerJohn W. Linville <linville@tuxdriver.com>2011-08-12 13:45:04 -0400
commit5fb628e9105eef6796789b1ae93289e1566ccdf0 (patch)
tree3d1e9eef06be596bdd0ab936b8527202afac42e7
parent32e9de846be885444358b67267f837088c05e0c2 (diff)
nl80211/cfg80211: Add crypto settings into NEW_BEACON
This removes need from drivers to parse the beacon tail/head data to figure out what crypto settings are to be used in AP mode in case the Beacon and Probe Response frames are fully constructed in the driver/firmware. Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-rw-r--r--include/linux/nl80211.h25
-rw-r--r--include/net/cfg80211.h66
-rw-r--r--net/wireless/nl80211.c21
3 files changed, 72 insertions, 40 deletions
diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h
index 227ee9a0ff1..580fcdceed2 100644
--- a/include/linux/nl80211.h
+++ b/include/linux/nl80211.h
@@ -163,7 +163,10 @@
* %NL80211_ATTR_BEACON_HEAD and %NL80211_ATTR_BEACON_TAIL attributes.
* Following attributes are provided for drivers that generate full Beacon
* and Probe Response frames internally: %NL80211_ATTR_SSID,
- * %NL80211_ATTR_HIDDEN_SSID.
+ * %NL80211_ATTR_HIDDEN_SSID, %NL80211_ATTR_CIPHERS_PAIRWISE,
+ * %NL80211_ATTR_CIPHER_GROUP, %NL80211_ATTR_WPA_VERSIONS,
+ * %NL80211_ATTR_AKM_SUITES, %NL80211_ATTR_PRIVACY,
+ * %NL80211_ATTR_AUTH_TYPE.
* @NL80211_CMD_NEW_BEACON: add a new beacon to an access point interface,
* parameters are like for %NL80211_CMD_SET_BEACON.
* @NL80211_CMD_DEL_BEACON: remove the beacon, stop sending it
@@ -845,18 +848,20 @@ enum nl80211_commands {
* @NL80211_ATTR_STATUS_CODE: StatusCode for the %NL80211_CMD_CONNECT
* event (u16)
* @NL80211_ATTR_PRIVACY: Flag attribute, used with connect(), indicating
- * that protected APs should be used.
+ * that protected APs should be used. This is also used with NEW_BEACON to
+ * indicate that the BSS is to use protection.
*
- * @NL80211_ATTR_CIPHERS_PAIRWISE: Used with CONNECT and ASSOCIATE to
- * indicate which unicast key ciphers will be used with the connection
+ * @NL80211_ATTR_CIPHERS_PAIRWISE: Used with CONNECT, ASSOCIATE, and NEW_BEACON
+ * to indicate which unicast key ciphers will be used with the connection
* (an array of u32).
- * @NL80211_ATTR_CIPHER_GROUP: Used with CONNECT and ASSOCIATE to indicate
- * which group key cipher will be used with the connection (a u32).
- * @NL80211_ATTR_WPA_VERSIONS: Used with CONNECT and ASSOCIATE to indicate
- * which WPA version(s) the AP we want to associate with is using
+ * @NL80211_ATTR_CIPHER_GROUP: Used with CONNECT, ASSOCIATE, and NEW_BEACON to
+ * indicate which group key cipher will be used with the connection (a
+ * u32).
+ * @NL80211_ATTR_WPA_VERSIONS: Used with CONNECT, ASSOCIATE, and NEW_BEACON to
+ * indicate which WPA version(s) the AP we want to associate with is using
* (a u32 with flags from &enum nl80211_wpa_versions).
- * @NL80211_ATTR_AKM_SUITES: Used with CONNECT and ASSOCIATE to indicate
- * which key management algorithm(s) to use (an array of u32).
+ * @NL80211_ATTR_AKM_SUITES: Used with CONNECT, ASSOCIATE, and NEW_BEACON to
+ * indicate which key management algorithm(s) to use (an array of u32).
*
* @NL80211_ATTR_REQ_IE: (Re)association request information elements as
* sent out by the card, for ROAM and successful CONNECT events.
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index 9ee93e7f0e3..6fcd0bf4dc6 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -334,6 +334,36 @@ struct survey_info {
};
/**
+ * struct cfg80211_crypto_settings - Crypto settings
+ * @wpa_versions: indicates which, if any, WPA versions are enabled
+ * (from enum nl80211_wpa_versions)
+ * @cipher_group: group key cipher suite (or 0 if unset)
+ * @n_ciphers_pairwise: number of AP supported unicast ciphers
+ * @ciphers_pairwise: unicast key cipher suites
+ * @n_akm_suites: number of AKM suites
+ * @akm_suites: AKM suites
+ * @control_port: Whether user space controls IEEE 802.1X port, i.e.,
+ * sets/clears %NL80211_STA_FLAG_AUTHORIZED. If true, the driver is
+ * required to assume that the port is unauthorized until authorized by
+ * user space. Otherwise, port is marked authorized by default.
+ * @control_port_ethertype: the control port protocol that should be
+ * allowed through even on unauthorized ports
+ * @control_port_no_encrypt: TRUE to prevent encryption of control port
+ * protocol frames.
+ */
+struct cfg80211_crypto_settings {
+ u32 wpa_versions;
+ u32 cipher_group;
+ int n_ciphers_pairwise;
+ u32 ciphers_pairwise[NL80211_MAX_NR_CIPHER_SUITES];
+ int n_akm_suites;
+ u32 akm_suites[NL80211_MAX_NR_AKM_SUITES];
+ bool control_port;
+ __be16 control_port_ethertype;
+ bool control_port_no_encrypt;
+};
+
+/**
* struct beacon_parameters - beacon parameters
*
* Used to configure the beacon for an interface.
@@ -350,6 +380,9 @@ struct survey_info {
* user space)
* @ssid_len: length of @ssid
* @hidden_ssid: whether to hide the SSID in Beacon/Probe Response frames
+ * @crypto: crypto settings
+ * @privacy: the BSS uses privacy
+ * @auth_type: Authentication type (algorithm)
*/
struct beacon_parameters {
u8 *head, *tail;
@@ -358,6 +391,9 @@ struct beacon_parameters {
const u8 *ssid;
size_t ssid_len;
enum nl80211_hidden_ssid hidden_ssid;
+ struct cfg80211_crypto_settings crypto;
+ bool privacy;
+ enum nl80211_auth_type auth_type;
};
/**
@@ -913,36 +949,6 @@ const u8 *ieee80211_bss_get_ie(struct cfg80211_bss *bss, u8 ie);
/**
- * struct cfg80211_crypto_settings - Crypto settings
- * @wpa_versions: indicates which, if any, WPA versions are enabled
- * (from enum nl80211_wpa_versions)
- * @cipher_group: group key cipher suite (or 0 if unset)
- * @n_ciphers_pairwise: number of AP supported unicast ciphers
- * @ciphers_pairwise: unicast key cipher suites
- * @n_akm_suites: number of AKM suites
- * @akm_suites: AKM suites
- * @control_port: Whether user space controls IEEE 802.1X port, i.e.,
- * sets/clears %NL80211_STA_FLAG_AUTHORIZED. If true, the driver is
- * required to assume that the port is unauthorized until authorized by
- * user space. Otherwise, port is marked authorized by default.
- * @control_port_ethertype: the control port protocol that should be
- * allowed through even on unauthorized ports
- * @control_port_no_encrypt: TRUE to prevent encryption of control port
- * protocol frames.
- */
-struct cfg80211_crypto_settings {
- u32 wpa_versions;
- u32 cipher_group;
- int n_ciphers_pairwise;
- u32 ciphers_pairwise[NL80211_MAX_NR_CIPHER_SUITES];
- int n_akm_suites;
- u32 akm_suites[NL80211_MAX_NR_AKM_SUITES];
- bool control_port;
- __be16 control_port_ethertype;
- bool control_port_no_encrypt;
-};
-
-/**
* struct cfg80211_auth_request - Authentication request data
*
* This structure provides information needed to complete IEEE 802.11
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index fbb63d3ddc7..6e57a3afb60 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -23,6 +23,12 @@
#include "nl80211.h"
#include "reg.h"
+static bool nl80211_valid_auth_type(enum nl80211_auth_type auth_type);
+static int nl80211_crypto_settings(struct cfg80211_registered_device *rdev,
+ struct genl_info *info,
+ struct cfg80211_crypto_settings *settings,
+ int cipher_limit);
+
static int nl80211_pre_doit(struct genl_ops *ops, struct sk_buff *skb,
struct genl_info *info);
static void nl80211_post_doit(struct genl_ops *ops, struct sk_buff *skb,
@@ -2039,6 +2045,21 @@ static int nl80211_addset_beacon(struct sk_buff *skb, struct genl_info *info)
return -EINVAL;
}
+ params.privacy = !!info->attrs[NL80211_ATTR_PRIVACY];
+
+ if (info->attrs[NL80211_ATTR_AUTH_TYPE]) {
+ params.auth_type = nla_get_u32(
+ info->attrs[NL80211_ATTR_AUTH_TYPE]);
+ if (!nl80211_valid_auth_type(params.auth_type))
+ return -EINVAL;
+ } else
+ params.auth_type = NL80211_AUTHTYPE_AUTOMATIC;
+
+ err = nl80211_crypto_settings(rdev, info, &params.crypto,
+ NL80211_MAX_NR_CIPHER_SUITES);
+ if (err)
+ return err;
+
call = rdev->ops->add_beacon;
break;
case NL80211_CMD_SET_BEACON: