spi/imx: get rid of more ifs depending on the used cpu

Nearly everything that is needed is provided by the version of the SPI IP.
Now the only checks left using cpu_is_... are clk divider tuning on mx21/mx27
and autodetection (which will die soon).

Acked-by: Jason Wang <jason77.wang@gmail.com>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

1 files changed, 53 insertions, 20 deletions

diff --git a/drivers/spi/spi_imx.c b/drivers/spi/spi_imx.c
index 20cdee3b5a2..60a52d173d8 100644
--- a/drivers/spi/spi_imx.c
+++ b/drivers/spi/spi_imx.c
@@ -75,6 +75,7 @@ struct spi_imx_devtype_data {
 	int (*config)(struct spi_imx_data *, struct spi_imx_config *);
 	void (*trigger)(struct spi_imx_data *);
 	int (*rx_available)(struct spi_imx_data *);
+	void (*reset)(struct spi_imx_data *);
 };
 
 struct spi_imx_data {
@@ -213,7 +214,7 @@ static void __maybe_unused mx31_trigger(struct spi_imx_data *spi_imx)
 	writel(reg, spi_imx->base + MXC_CSPICTRL);
 }
 
-static int __maybe_unused mx31_config(struct spi_imx_data *spi_imx,
+static int __maybe_unused spi_imx0_4_config(struct spi_imx_data *spi_imx,
 		struct spi_imx_config *config)
 {
 	unsigned int reg = MX31_CSPICTRL_ENABLE | MX31_CSPICTRL_MASTER;
@@ -221,12 +222,7 @@ static int __maybe_unused mx31_config(struct spi_imx_data *spi_imx,
 	reg |= spi_imx_clkdiv_2(spi_imx->spi_clk, config->speed_hz) <<
 		MX31_CSPICTRL_DR_SHIFT;
 
-	if (cpu_is_mx31())
-		reg |= (config->bpw - 1) << MX31_CSPICTRL_BC_SHIFT;
-	else if (cpu_is_mx25() || cpu_is_mx35()) {
-		reg |= (config->bpw - 1) << MX35_CSPICTRL_BL_SHIFT;
-		reg |= MX31_CSPICTRL_SSCTL;
-	}
+	reg |= (config->bpw - 1) << MX31_CSPICTRL_BC_SHIFT;
 
 	if (config->mode & SPI_CPHA)
 		reg |= MX31_CSPICTRL_PHA;
@@ -235,10 +231,7 @@ static int __maybe_unused mx31_config(struct spi_imx_data *spi_imx,
 	if (config->mode & SPI_CS_HIGH)
 		reg |= MX31_CSPICTRL_SSPOL;
 	if (config->cs < 0) {
-		if (cpu_is_mx31())
-			reg |= (config->cs + 32) << MX31_CSPICTRL_CS_SHIFT;
-		else if (cpu_is_mx25() || cpu_is_mx35())
-			reg |= (config->cs + 32) << MX35_CSPICTRL_CS_SHIFT;
+		reg |= (config->cs + 32) << MX31_CSPICTRL_CS_SHIFT;
 	}
 
 	writel(reg, spi_imx->base + MXC_CSPICTRL);
@@ -246,11 +239,43 @@ static int __maybe_unused mx31_config(struct spi_imx_data *spi_imx,
 	return 0;
 }
 
+static int __maybe_unused spi_imx0_7_config(struct spi_imx_data *spi_imx,
+		struct spi_imx_config *config)
+{
+	unsigned int reg = MX31_CSPICTRL_ENABLE | MX31_CSPICTRL_MASTER;
+
+	reg |= spi_imx_clkdiv_2(spi_imx->spi_clk, config->speed_hz) <<
+		MX31_CSPICTRL_DR_SHIFT;
+
+	reg |= (config->bpw - 1) << MX35_CSPICTRL_BL_SHIFT;
+	reg |= MX31_CSPICTRL_SSCTL;
+
+	if (config->mode & SPI_CPHA)
+		reg |= MX31_CSPICTRL_PHA;
+	if (config->mode & SPI_CPOL)
+		reg |= MX31_CSPICTRL_POL;
+	if (config->mode & SPI_CS_HIGH)
+		reg |= MX31_CSPICTRL_SSPOL;
+	if (config->cs < 0)
+		reg |= (config->cs + 32) << MX35_CSPICTRL_CS_SHIFT;
+
+	writel(reg, spi_imx->base + MXC_CSPICTRL);
+
+	return 0;
+}
+
 static int __maybe_unused mx31_rx_available(struct spi_imx_data *spi_imx)
 {
 	return readl(spi_imx->base + MX31_CSPISTATUS) & MX31_STATUS_RR;
 }
 
+static void __maybe_unused spi_imx0_4_reset(struct spi_imx_data *spi_imx)
+{
+	/* drain receive buffer */
+	while (readl(spi_imx->base + MX3_CSPISTAT) & MX3_CSPISTAT_RR)
+		readl(spi_imx->base + MXC_CSPIRXDATA);
+}
+
 #define MX27_INTREG_RR		(1 << 4)
 #define MX27_INTREG_TEEN	(1 << 9)
 #define MX27_INTREG_RREN	(1 << 13)
@@ -313,6 +338,11 @@ static int __maybe_unused mx27_rx_available(struct spi_imx_data *spi_imx)
 	return readl(spi_imx->base + MXC_CSPIINT) & MX27_INTREG_RR;
 }
 
+static void __maybe_unused spi_imx0_0_reset(struct spi_imx_data *spi_imx)
+{
+	writel(1, spi_imx->base + MXC_RESET);
+}
+
 #define MX1_INTREG_RR		(1 << 3)
 #define MX1_INTREG_TEEN		(1 << 8)
 #define MX1_INTREG_RREN		(1 << 11)
@@ -369,6 +399,11 @@ static int __maybe_unused mx1_rx_available(struct spi_imx_data *spi_imx)
 	return readl(spi_imx->base + MXC_CSPIINT) & MX1_INTREG_RR;
 }
 
+static void __maybe_unused mx1_reset(struct spi_imx_data *spi_imx)
+{
+	writel(1, spi_imx->base + MXC_RESET);
+}
+
 /*
  * These version numbers are taken from the Freescale driver.  Unfortunately it
  * doesn't support i.MX1, so this entry doesn't match the scheme. :-(
@@ -380,6 +415,7 @@ static struct spi_imx_devtype_data spi_imx_devtype_data[] __devinitdata = {
 		.config = mx1_config,
 		.trigger = mx1_trigger,
 		.rx_available = mx1_rx_available,
+		.reset = mx1_reset,
 	},
 #endif
 #ifdef CONFIG_SPI_IMX_VER_0_0
@@ -388,22 +424,25 @@ static struct spi_imx_devtype_data spi_imx_devtype_data[] __devinitdata = {
 		.config = mx27_config,
 		.trigger = mx27_trigger,
 		.rx_available = mx27_rx_available,
+		.reset = spi_imx0_0_reset,
 	},
 #endif
 #ifdef CONFIG_SPI_IMX_VER_0_4
 	[SPI_IMX_VER_0_4] = {
 		.intctrl = mx31_intctrl,
-		.config = mx31_config,
+		.config = spi_imx0_4_config,
 		.trigger = mx31_trigger,
 		.rx_available = mx31_rx_available,
+		.reset = spi_imx0_4_reset,
 	},
 #endif
 #ifdef CONFIG_SPI_IMX_VER_0_7
 	[SPI_IMX_VER_0_7] = {
 		.intctrl = mx31_intctrl,
-		.config = mx31_config,
+		.config = spi_imx0_7_config,
 		.trigger = mx31_trigger,
 		.rx_available = mx31_rx_available,
+		.reset = spi_imx0_4_reset,
 	},
 #endif
 };
@@ -683,13 +722,7 @@ static int __devinit spi_imx_probe(struct platform_device *pdev)
 	clk_enable(spi_imx->clk);
 	spi_imx->spi_clk = clk_get_rate(spi_imx->clk);
 
-	if (cpu_is_mx1() || cpu_is_mx21() || cpu_is_mx27())
-		writel(1, spi_imx->base + MXC_RESET);
-
-	/* drain receive buffer */
-	if (cpu_is_mx25() || cpu_is_mx31() || cpu_is_mx35())
-		while (readl(spi_imx->base + MX3_CSPISTAT) & MX3_CSPISTAT_RR)
-			readl(spi_imx->base + MXC_CSPIRXDATA);
+	spi_imx->devtype_data.reset(spi_imx);
 
 	spi_imx->devtype_data.intctrl(spi_imx, 0);