summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorEdward Cree <ecree@solarflare.com>2014-04-16 19:27:48 +0100
committerDavid S. Miller <davem@davemloft.net>2014-04-16 14:33:57 -0400
commite283546c0465dd3026bc94f7b1a9de7f6b8969ec (patch)
tree3828d4faeed3986b0f01b93416b910b11cd33280
parent10ec34fcb100412ab186c141a9c3557d1270effd (diff)
sfc:On MCDI timeout, issue an FLR (and mark MCDI to fail-fast)
When an MCDI command times out (whether or not we find it completed when we poll), call efx_mcdi_abandon(), which tells all subsequent MCDI calls to fail-fast, and queues up an FLR. Because an FLR doesn't lead to receiving any reboot even from the MC (unlike most other types of reset), we have to call efx_ef10_reset_mc_allocations. In efx_start_all(), if a reset (of any kind) is pending, we bail out. Without this, attempts to reconfigure (e.g. change mtu) can cause driver/mc state inconsistency if the first MCDI call triggers an FLR. For similar reasons, on EF10, in efx_reset_down(method=RESET_TYPE_MCDI_TIMEOUT), set the number of active queues to zero before calling efx_stop_all(). And, on farch, in efx_reset_up(method=RESET_TYPE_MCDI_TIMEOUT), set active_queues and flushes pending & outstanding to zero. efx_mcdi_mode_{poll,event}() should not take us out of fail-fast mode. Instead, this is done by efx_mcdi_reset() after the FLR completes. The new FLR reset_type RESET_TYPE_MCDI_TIMEOUT doesn't really fit into the hierarchy of reset 'scopes' whereby efx_reset() decides some resets subsume others. Thus, it uses separate logic. Also, fixed up some inconsistency around RESET_TYPE_MC_BIST, which was in the wrong place in that hierarchy. Signed-off-by: Shradha Shah <sshah@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-rw-r--r--drivers/net/ethernet/sfc/ef10.c12
-rw-r--r--drivers/net/ethernet/sfc/efx.c19
-rw-r--r--drivers/net/ethernet/sfc/enum.h23
-rw-r--r--drivers/net/ethernet/sfc/falcon.c4
-rw-r--r--drivers/net/ethernet/sfc/farch.c22
-rw-r--r--drivers/net/ethernet/sfc/mcdi.c55
-rw-r--r--drivers/net/ethernet/sfc/mcdi.h13
-rw-r--r--drivers/net/ethernet/sfc/net_driver.h4
-rw-r--r--drivers/net/ethernet/sfc/nic.h1
-rw-r--r--drivers/net/ethernet/sfc/siena.c2
10 files changed, 133 insertions, 22 deletions
diff --git a/drivers/net/ethernet/sfc/ef10.c b/drivers/net/ethernet/sfc/ef10.c
index 21c20ea0dad..b5ed30a3914 100644
--- a/drivers/net/ethernet/sfc/ef10.c
+++ b/drivers/net/ethernet/sfc/ef10.c
@@ -738,8 +738,11 @@ static int efx_ef10_reset(struct efx_nic *efx, enum reset_type reset_type)
/* If it was a port reset, trigger reallocation of MC resources.
* Note that on an MC reset nothing needs to be done now because we'll
* detect the MC reset later and handle it then.
+ * For an FLR, we never get an MC reset event, but the MC has reset all
+ * resources assigned to us, so we have to trigger reallocation now.
*/
- if (reset_type == RESET_TYPE_ALL && !rc)
+ if ((reset_type == RESET_TYPE_ALL ||
+ reset_type == RESET_TYPE_MCDI_TIMEOUT) && !rc)
efx_ef10_reset_mc_allocations(efx);
return rc;
}
@@ -2141,6 +2144,11 @@ static int efx_ef10_fini_dmaq(struct efx_nic *efx)
return 0;
}
+static void efx_ef10_prepare_flr(struct efx_nic *efx)
+{
+ atomic_set(&efx->active_queues, 0);
+}
+
static bool efx_ef10_filter_equal(const struct efx_filter_spec *left,
const struct efx_filter_spec *right)
{
@@ -3603,6 +3611,8 @@ const struct efx_nic_type efx_hunt_a0_nic_type = {
.probe_port = efx_mcdi_port_probe,
.remove_port = efx_mcdi_port_remove,
.fini_dmaq = efx_ef10_fini_dmaq,
+ .prepare_flr = efx_ef10_prepare_flr,
+ .finish_flr = efx_port_dummy_op_void,
.describe_stats = efx_ef10_describe_stats,
.update_stats = efx_ef10_update_stats,
.start_stats = efx_mcdi_mac_start_stats,
diff --git a/drivers/net/ethernet/sfc/efx.c b/drivers/net/ethernet/sfc/efx.c
index 57b971e5e6b..63d595fd3cc 100644
--- a/drivers/net/ethernet/sfc/efx.c
+++ b/drivers/net/ethernet/sfc/efx.c
@@ -76,6 +76,7 @@ const char *const efx_reset_type_names[] = {
[RESET_TYPE_RECOVER_OR_ALL] = "RECOVER_OR_ALL",
[RESET_TYPE_WORLD] = "WORLD",
[RESET_TYPE_RECOVER_OR_DISABLE] = "RECOVER_OR_DISABLE",
+ [RESET_TYPE_MC_BIST] = "MC_BIST",
[RESET_TYPE_DISABLE] = "DISABLE",
[RESET_TYPE_TX_WATCHDOG] = "TX_WATCHDOG",
[RESET_TYPE_INT_ERROR] = "INT_ERROR",
@@ -83,7 +84,7 @@ const char *const efx_reset_type_names[] = {
[RESET_TYPE_DMA_ERROR] = "DMA_ERROR",
[RESET_TYPE_TX_SKIP] = "TX_SKIP",
[RESET_TYPE_MC_FAILURE] = "MC_FAILURE",
- [RESET_TYPE_MC_BIST] = "MC_BIST",
+ [RESET_TYPE_MCDI_TIMEOUT] = "MCDI_TIMEOUT (FLR)",
};
/* Reset workqueue. If any NIC has a hardware failure then a reset will be
@@ -1739,7 +1740,8 @@ static void efx_start_all(struct efx_nic *efx)
/* Check that it is appropriate to restart the interface. All
* of these flags are safe to read under just the rtnl lock */
- if (efx->port_enabled || !netif_running(efx->net_dev))
+ if (efx->port_enabled || !netif_running(efx->net_dev) ||
+ efx->reset_pending)
return;
efx_start_port(efx);
@@ -2334,6 +2336,9 @@ void efx_reset_down(struct efx_nic *efx, enum reset_type method)
{
EFX_ASSERT_RESET_SERIALISED(efx);
+ if (method == RESET_TYPE_MCDI_TIMEOUT)
+ efx->type->prepare_flr(efx);
+
efx_stop_all(efx);
efx_disable_interrupts(efx);
@@ -2354,6 +2359,10 @@ int efx_reset_up(struct efx_nic *efx, enum reset_type method, bool ok)
EFX_ASSERT_RESET_SERIALISED(efx);
+ if (method == RESET_TYPE_MCDI_TIMEOUT)
+ efx->type->finish_flr(efx);
+
+ /* Ensure that SRAM is initialised even if we're disabling the device */
rc = efx->type->init(efx);
if (rc) {
netif_err(efx, drv, efx->net_dev, "failed to initialise NIC\n");
@@ -2417,7 +2426,10 @@ int efx_reset(struct efx_nic *efx, enum reset_type method)
/* Clear flags for the scopes we covered. We assume the NIC and
* driver are now quiescent so that there is no race here.
*/
- efx->reset_pending &= -(1 << (method + 1));
+ if (method < RESET_TYPE_MAX_METHOD)
+ efx->reset_pending &= -(1 << (method + 1));
+ else /* it doesn't fit into the well-ordered scope hierarchy */
+ __clear_bit(method, &efx->reset_pending);
/* Reinitialise bus-mastering, which may have been turned off before
* the reset was scheduled. This is still appropriate, even in the
@@ -2546,6 +2558,7 @@ void efx_schedule_reset(struct efx_nic *efx, enum reset_type type)
case RESET_TYPE_DISABLE:
case RESET_TYPE_RECOVER_OR_DISABLE:
case RESET_TYPE_MC_BIST:
+ case RESET_TYPE_MCDI_TIMEOUT:
method = type;
netif_dbg(efx, drv, efx->net_dev, "scheduling %s reset\n",
RESET_TYPE(method));
diff --git a/drivers/net/ethernet/sfc/enum.h b/drivers/net/ethernet/sfc/enum.h
index 75ef7ef6450..d1dbb5fb31b 100644
--- a/drivers/net/ethernet/sfc/enum.h
+++ b/drivers/net/ethernet/sfc/enum.h
@@ -143,6 +143,7 @@ enum efx_loopback_mode {
* @RESET_TYPE_WORLD: Reset as much as possible
* @RESET_TYPE_RECOVER_OR_DISABLE: Try to recover. Apply RESET_TYPE_DISABLE if
* unsuccessful.
+ * @RESET_TYPE_MC_BIST: MC entering BIST mode.
* @RESET_TYPE_DISABLE: Reset datapath, MAC and PHY; leave NIC disabled
* @RESET_TYPE_TX_WATCHDOG: reset due to TX watchdog
* @RESET_TYPE_INT_ERROR: reset due to internal error
@@ -150,14 +151,16 @@ enum efx_loopback_mode {
* @RESET_TYPE_DMA_ERROR: DMA error
* @RESET_TYPE_TX_SKIP: hardware completed empty tx descriptors
* @RESET_TYPE_MC_FAILURE: MC reboot/assertion
+ * @RESET_TYPE_MCDI_TIMEOUT: MCDI timeout.
*/
enum reset_type {
- RESET_TYPE_INVISIBLE = 0,
- RESET_TYPE_RECOVER_OR_ALL = 1,
- RESET_TYPE_ALL = 2,
- RESET_TYPE_WORLD = 3,
- RESET_TYPE_RECOVER_OR_DISABLE = 4,
- RESET_TYPE_DISABLE = 5,
+ RESET_TYPE_INVISIBLE,
+ RESET_TYPE_RECOVER_OR_ALL,
+ RESET_TYPE_ALL,
+ RESET_TYPE_WORLD,
+ RESET_TYPE_RECOVER_OR_DISABLE,
+ RESET_TYPE_MC_BIST,
+ RESET_TYPE_DISABLE,
RESET_TYPE_MAX_METHOD,
RESET_TYPE_TX_WATCHDOG,
RESET_TYPE_INT_ERROR,
@@ -165,7 +168,13 @@ enum reset_type {
RESET_TYPE_DMA_ERROR,
RESET_TYPE_TX_SKIP,
RESET_TYPE_MC_FAILURE,
- RESET_TYPE_MC_BIST,
+ /* RESET_TYPE_MCDI_TIMEOUT is actually a method, not just a reason, but
+ * it doesn't fit the scope hierarchy (not well-ordered by inclusion).
+ * We encode this by having its enum value be greater than
+ * RESET_TYPE_MAX_METHOD. This also prevents issuing it with
+ * efx_ioctl_reset.
+ */
+ RESET_TYPE_MCDI_TIMEOUT,
RESET_TYPE_MAX,
};
diff --git a/drivers/net/ethernet/sfc/falcon.c b/drivers/net/ethernet/sfc/falcon.c
index 8ec20b713cc..fae25a41864 100644
--- a/drivers/net/ethernet/sfc/falcon.c
+++ b/drivers/net/ethernet/sfc/falcon.c
@@ -2696,6 +2696,8 @@ const struct efx_nic_type falcon_a1_nic_type = {
.fini_dmaq = efx_farch_fini_dmaq,
.prepare_flush = falcon_prepare_flush,
.finish_flush = efx_port_dummy_op_void,
+ .prepare_flr = efx_port_dummy_op_void,
+ .finish_flr = efx_farch_finish_flr,
.describe_stats = falcon_describe_nic_stats,
.update_stats = falcon_update_nic_stats,
.start_stats = falcon_start_nic_stats,
@@ -2790,6 +2792,8 @@ const struct efx_nic_type falcon_b0_nic_type = {
.fini_dmaq = efx_farch_fini_dmaq,
.prepare_flush = falcon_prepare_flush,
.finish_flush = efx_port_dummy_op_void,
+ .prepare_flr = efx_port_dummy_op_void,
+ .finish_flr = efx_farch_finish_flr,
.describe_stats = falcon_describe_nic_stats,
.update_stats = falcon_update_nic_stats,
.start_stats = falcon_start_nic_stats,
diff --git a/drivers/net/ethernet/sfc/farch.c b/drivers/net/ethernet/sfc/farch.c
index a08761360cd..0537381cd2f 100644
--- a/drivers/net/ethernet/sfc/farch.c
+++ b/drivers/net/ethernet/sfc/farch.c
@@ -741,6 +741,28 @@ int efx_farch_fini_dmaq(struct efx_nic *efx)
return rc;
}
+/* Reset queue and flush accounting after FLR
+ *
+ * One possible cause of FLR recovery is that DMA may be failing (eg. if bus
+ * mastering was disabled), in which case we don't receive (RXQ) flush
+ * completion events. This means that efx->rxq_flush_outstanding remained at 4
+ * after the FLR; also, efx->active_queues was non-zero (as no flush completion
+ * events were received, and we didn't go through efx_check_tx_flush_complete())
+ * If we don't fix this up, on the next call to efx_realloc_channels() we won't
+ * flush any RX queues because efx->rxq_flush_outstanding is at the limit of 4
+ * for batched flush requests; and the efx->active_queues gets messed up because
+ * we keep incrementing for the newly initialised queues, but it never went to
+ * zero previously. Then we get a timeout every time we try to restart the
+ * queues, as it doesn't go back to zero when we should be flushing the queues.
+ */
+void efx_farch_finish_flr(struct efx_nic *efx)
+{
+ atomic_set(&efx->rxq_flush_pending, 0);
+ atomic_set(&efx->rxq_flush_outstanding, 0);
+ atomic_set(&efx->active_queues, 0);
+}
+
+
/**************************************************************************
*
* Event queue processing
diff --git a/drivers/net/ethernet/sfc/mcdi.c b/drivers/net/ethernet/sfc/mcdi.c
index 7bd4b14bf3b..5239cf9bdc5 100644
--- a/drivers/net/ethernet/sfc/mcdi.c
+++ b/drivers/net/ethernet/sfc/mcdi.c
@@ -52,12 +52,7 @@ static void efx_mcdi_timeout_async(unsigned long context);
static int efx_mcdi_drv_attach(struct efx_nic *efx, bool driver_operating,
bool *was_attached_out);
static bool efx_mcdi_poll_once(struct efx_nic *efx);
-
-static inline struct efx_mcdi_iface *efx_mcdi(struct efx_nic *efx)
-{
- EFX_BUG_ON_PARANOID(!efx->mcdi);
- return &efx->mcdi->iface;
-}
+static void efx_mcdi_abandon(struct efx_nic *efx);
int efx_mcdi_init(struct efx_nic *efx)
{
@@ -558,6 +553,8 @@ static int _efx_mcdi_rpc_finish(struct efx_nic *efx, unsigned cmd, size_t inlen,
rc = 0;
}
+ efx_mcdi_abandon(efx);
+
/* Close the race with efx_mcdi_ev_cpl() executing just too late
* and completing a request we've just cancelled, by ensuring
* that the seqno check therein fails.
@@ -672,6 +669,9 @@ int efx_mcdi_rpc_start(struct efx_nic *efx, unsigned cmd,
if (efx->mc_bist_for_other_fn)
return -ENETDOWN;
+ if (mcdi->mode == MCDI_MODE_FAIL)
+ return -ENETDOWN;
+
efx_mcdi_acquire_sync(mcdi);
efx_mcdi_send_request(efx, cmd, inbuf, inlen);
return 0;
@@ -812,7 +812,11 @@ void efx_mcdi_mode_poll(struct efx_nic *efx)
return;
mcdi = efx_mcdi(efx);
- if (mcdi->mode == MCDI_MODE_POLL)
+ /* If already in polling mode, nothing to do.
+ * If in fail-fast state, don't switch to polled completion.
+ * FLR recovery will do that later.
+ */
+ if (mcdi->mode == MCDI_MODE_POLL || mcdi->mode == MCDI_MODE_FAIL)
return;
/* We can switch from event completion to polled completion, because
@@ -841,8 +845,8 @@ void efx_mcdi_flush_async(struct efx_nic *efx)
mcdi = efx_mcdi(efx);
- /* We must be in polling mode so no more requests can be queued */
- BUG_ON(mcdi->mode != MCDI_MODE_POLL);
+ /* We must be in poll or fail mode so no more requests can be queued */
+ BUG_ON(mcdi->mode == MCDI_MODE_EVENTS);
del_timer_sync(&mcdi->async_timer);
@@ -875,8 +879,11 @@ void efx_mcdi_mode_event(struct efx_nic *efx)
return;
mcdi = efx_mcdi(efx);
-
- if (mcdi->mode == MCDI_MODE_EVENTS)
+ /* If already in event completion mode, nothing to do.
+ * If in fail-fast state, don't switch to event completion. FLR
+ * recovery will do that later.
+ */
+ if (mcdi->mode == MCDI_MODE_EVENTS || mcdi->mode == MCDI_MODE_FAIL)
return;
/* We can't switch from polled to event completion in the middle of a
@@ -966,6 +973,19 @@ static void efx_mcdi_ev_bist(struct efx_nic *efx)
spin_unlock(&mcdi->iface_lock);
}
+/* MCDI timeouts seen, so make all MCDI calls fail-fast and issue an FLR to try
+ * to recover.
+ */
+static void efx_mcdi_abandon(struct efx_nic *efx)
+{
+ struct efx_mcdi_iface *mcdi = efx_mcdi(efx);
+
+ if (xchg(&mcdi->mode, MCDI_MODE_FAIL) == MCDI_MODE_FAIL)
+ return; /* it had already been done */
+ netif_dbg(efx, hw, efx->net_dev, "MCDI is timing out; trying to recover\n");
+ efx_schedule_reset(efx, RESET_TYPE_MCDI_TIMEOUT);
+}
+
/* Called from falcon_process_eventq for MCDI events */
void efx_mcdi_process_event(struct efx_channel *channel,
efx_qword_t *event)
@@ -1512,6 +1532,19 @@ int efx_mcdi_reset(struct efx_nic *efx, enum reset_type method)
{
int rc;
+ /* If MCDI is down, we can't handle_assertion */
+ if (method == RESET_TYPE_MCDI_TIMEOUT) {
+ rc = pci_reset_function(efx->pci_dev);
+ if (rc)
+ return rc;
+ /* Re-enable polled MCDI completion */
+ if (efx->mcdi) {
+ struct efx_mcdi_iface *mcdi = efx_mcdi(efx);
+ mcdi->mode = MCDI_MODE_POLL;
+ }
+ return 0;
+ }
+
/* Recover from a failed assertion pre-reset */
rc = efx_mcdi_handle_assertion(efx);
if (rc)
diff --git a/drivers/net/ethernet/sfc/mcdi.h b/drivers/net/ethernet/sfc/mcdi.h
index 52931aebf3c..56465f7465a 100644
--- a/drivers/net/ethernet/sfc/mcdi.h
+++ b/drivers/net/ethernet/sfc/mcdi.h
@@ -28,9 +28,16 @@ enum efx_mcdi_state {
MCDI_STATE_COMPLETED,
};
+/**
+ * enum efx_mcdi_mode - MCDI transaction mode
+ * @MCDI_MODE_POLL: poll for MCDI completion, until timeout
+ * @MCDI_MODE_EVENTS: wait for an mcdi_event. On timeout, poll once
+ * @MCDI_MODE_FAIL: we think MCDI is dead, so fail-fast all calls
+ */
enum efx_mcdi_mode {
MCDI_MODE_POLL,
MCDI_MODE_EVENTS,
+ MCDI_MODE_FAIL,
};
/**
@@ -104,6 +111,12 @@ struct efx_mcdi_data {
u32 fn_flags;
};
+static inline struct efx_mcdi_iface *efx_mcdi(struct efx_nic *efx)
+{
+ EFX_BUG_ON_PARANOID(!efx->mcdi);
+ return &efx->mcdi->iface;
+}
+
#ifdef CONFIG_SFC_MCDI_MON
static inline struct efx_mcdi_mon *efx_mcdi_mon(struct efx_nic *efx)
{
diff --git a/drivers/net/ethernet/sfc/net_driver.h b/drivers/net/ethernet/sfc/net_driver.h
index 8a400a0595e..5bdae8ed7c5 100644
--- a/drivers/net/ethernet/sfc/net_driver.h
+++ b/drivers/net/ethernet/sfc/net_driver.h
@@ -972,6 +972,8 @@ struct efx_mtd_partition {
* (for Falcon architecture)
* @finish_flush: Clean up after flushing the DMA queues (for Falcon
* architecture)
+ * @prepare_flr: Prepare for an FLR
+ * @finish_flr: Clean up after an FLR
* @describe_stats: Describe statistics for ethtool
* @update_stats: Update statistics not provided by event handling.
* Either argument may be %NULL.
@@ -1100,6 +1102,8 @@ struct efx_nic_type {
int (*fini_dmaq)(struct efx_nic *efx);
void (*prepare_flush)(struct efx_nic *efx);
void (*finish_flush)(struct efx_nic *efx);
+ void (*prepare_flr)(struct efx_nic *efx);
+ void (*finish_flr)(struct efx_nic *efx);
size_t (*describe_stats)(struct efx_nic *efx, u8 *names);
size_t (*update_stats)(struct efx_nic *efx, u64 *full_stats,
struct rtnl_link_stats64 *core_stats);
diff --git a/drivers/net/ethernet/sfc/nic.h b/drivers/net/ethernet/sfc/nic.h
index a001fae1a8d..d3ad8ed8d90 100644
--- a/drivers/net/ethernet/sfc/nic.h
+++ b/drivers/net/ethernet/sfc/nic.h
@@ -757,6 +757,7 @@ static inline int efx_nic_irq_test_irq_cpu(struct efx_nic *efx)
int efx_nic_flush_queues(struct efx_nic *efx);
void siena_prepare_flush(struct efx_nic *efx);
int efx_farch_fini_dmaq(struct efx_nic *efx);
+void efx_farch_finish_flr(struct efx_nic *efx);
void siena_finish_flush(struct efx_nic *efx);
void falcon_start_nic_stats(struct efx_nic *efx);
void falcon_stop_nic_stats(struct efx_nic *efx);
diff --git a/drivers/net/ethernet/sfc/siena.c b/drivers/net/ethernet/sfc/siena.c
index 23f3a6f7737..50ffefed492 100644
--- a/drivers/net/ethernet/sfc/siena.c
+++ b/drivers/net/ethernet/sfc/siena.c
@@ -921,6 +921,8 @@ const struct efx_nic_type siena_a0_nic_type = {
.fini_dmaq = efx_farch_fini_dmaq,
.prepare_flush = siena_prepare_flush,
.finish_flush = siena_finish_flush,
+ .prepare_flr = efx_port_dummy_op_void,
+ .finish_flr = efx_farch_finish_flr,
.describe_stats = siena_describe_nic_stats,
.update_stats = siena_update_nic_stats,
.start_stats = efx_mcdi_mac_start_stats,