[ARM] 5296/1: [KS8695] Replace macro's with trailing underscores.

Replace Macro names that have trailing underscores.
Also use the IOPD() macro instead of a hard-coded bit-shift (for
better readability).

Signed-off-by: Andrew Victor <linux@maxim.org.za>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

4 files changed, 16 insertions, 16 deletions

diff --git a/arch/arm/mach-ks8695/gpio.c b/arch/arm/mach-ks8695/gpio.c
index 3624e65cd89..55cee776ff5 100644
--- a/arch/arm/mach-ks8695/gpio.c
+++ b/arch/arm/mach-ks8695/gpio.c
@@ -72,7 +72,7 @@ int __init_or_module ks8695_gpio_interrupt(unsigned int pin, unsigned int type)
 
 	/* set pin as input */
 	x = __raw_readl(KS8695_GPIO_VA + KS8695_IOPM);
-	x &= ~IOPM_(pin);
+	x &= ~IOPM(pin);
 	__raw_writel(x, KS8695_GPIO_VA + KS8695_IOPM);
 
 	local_irq_restore(flags);
@@ -108,7 +108,7 @@ int __init_or_module gpio_direction_input(unsigned int pin)
 
 	/* set pin as input */
 	x = __raw_readl(KS8695_GPIO_VA + KS8695_IOPM);
-	x &= ~IOPM_(pin);
+	x &= ~IOPM(pin);
 	__raw_writel(x, KS8695_GPIO_VA + KS8695_IOPM);
 
 	local_irq_restore(flags);
@@ -136,14 +136,14 @@ int __init_or_module gpio_direction_output(unsigned int pin, unsigned int state)
 	/* set line state */
 	x = __raw_readl(KS8695_GPIO_VA + KS8695_IOPD);
 	if (state)
-		x |= (1 << pin);
+		x |= IOPD(pin);
 	else
-		x &= ~(1 << pin);
+		x &= ~IOPD(pin);
 	__raw_writel(x, KS8695_GPIO_VA + KS8695_IOPD);
 
 	/* set pin as output */
 	x = __raw_readl(KS8695_GPIO_VA + KS8695_IOPM);
-	x |= IOPM_(pin);
+	x |= IOPM(pin);
 	__raw_writel(x, KS8695_GPIO_VA + KS8695_IOPM);
 
 	local_irq_restore(flags);
@@ -168,9 +168,9 @@ void gpio_set_value(unsigned int pin, unsigned int state)
 	/* set output line state */
 	x = __raw_readl(KS8695_GPIO_VA + KS8695_IOPD);
 	if (state)
-		x |= (1 << pin);
+		x |= IOPD(pin);
 	else
-		x &= ~(1 << pin);
+		x &= ~IOPD(pin);
 	__raw_writel(x, KS8695_GPIO_VA + KS8695_IOPD);
 
 	local_irq_restore(flags);
@@ -189,7 +189,7 @@ int gpio_get_value(unsigned int pin)
 		return -EINVAL;
 
 	x = __raw_readl(KS8695_GPIO_VA + KS8695_IOPD);
-	return (x & (1 << pin)) != 0;
+	return (x & IOPD(pin)) != 0;
 }
 EXPORT_SYMBOL(gpio_get_value);
 
@@ -240,7 +240,7 @@ static int ks8695_gpio_show(struct seq_file *s, void *unused)
 	for (i = KS8695_GPIO_0; i <= KS8695_GPIO_15 ; i++) {
 		seq_printf(s, "%i:\t", i);
 
-		seq_printf(s, "%s\t", (mode & IOPM_(i)) ? "Output" : "Input");
+		seq_printf(s, "%s\t", (mode & IOPM(i)) ? "Output" : "Input");
 
 		if (i <= KS8695_GPIO_3) {
 			if (ctrl & enable[i]) {
@@ -273,7 +273,7 @@ static int ks8695_gpio_show(struct seq_file *s, void *unused)
 
 		seq_printf(s, "\t");
 
-		seq_printf(s, "%i\n", (data & IOPD_(i)) ? 1 : 0);
+		seq_printf(s, "%i\n", (data & IOPD(i)) ? 1 : 0);
 	}
 	return 0;
 }
diff --git a/arch/arm/mach-ks8695/include/mach/regs-gpio.h b/arch/arm/mach-ks8695/include/mach/regs-gpio.h
index 0df6fe61d1c..90614a7d054 100644
--- a/arch/arm/mach-ks8695/include/mach/regs-gpio.h
+++ b/arch/arm/mach-ks8695/include/mach/regs-gpio.h
@@ -24,7 +24,7 @@
 
 
 /* Port Mode Register */
-#define IOPM_(x)		(1 << (x))	/* Mode for GPIO Pin x */
+#define IOPM(x)			(1 << (x))	/* Mode for GPIO Pin x */
 
 /* Port Control Register */
 #define IOPC_IOTIM1EN		(1 << 17)	/* GPIO Pin for Timer1 Enable */
@@ -50,6 +50,6 @@
 #define IOPC_TM_EDGE		(6)		/* Both Edge Detection */
 
 /* Port Data Register */
-#define IOPD_(x)		(1 << (x))	/* Signal Level of GPIO Pin x */
+#define IOPD(x)			(1 << (x))	/* Signal Level of GPIO Pin x */
 
 #endif
diff --git a/arch/arm/mach-ks8695/include/mach/regs-lan.h b/arch/arm/mach-ks8695/include/mach/regs-lan.h
index 9ef409901e7..82c5f3791af 100644
--- a/arch/arm/mach-ks8695/include/mach/regs-lan.h
+++ b/arch/arm/mach-ks8695/include/mach/regs-lan.h
@@ -29,8 +29,8 @@
 #define KS8695_LRDLB		(0x14)		/* Receive Descriptor List Base Address */
 #define KS8695_LMAL		(0x18)		/* MAC Station Address Low */
 #define KS8695_LMAH		(0x1c)		/* MAC Station Address High */
-#define KS8695_LMAAL_(n)	(0x80 + ((n)*8))	/* MAC Additional Station Address (0..15) Low */
-#define KS8695_LMAAH_(n)	(0x84 + ((n)*8))	/* MAC Additional Station Address (0..15) High */
+#define KS8695_LMAAL(n)		(0x80 + ((n)*8))	/* MAC Additional Station Address (0..15) Low */
+#define KS8695_LMAAH(n)		(0x84 + ((n)*8))	/* MAC Additional Station Address (0..15) High */
 
 
 /* DMA Transmit Control Register */
diff --git a/arch/arm/mach-ks8695/include/mach/regs-wan.h b/arch/arm/mach-ks8695/include/mach/regs-wan.h
index eb494ec6e95..c475bed22b8 100644
--- a/arch/arm/mach-ks8695/include/mach/regs-wan.h
+++ b/arch/arm/mach-ks8695/include/mach/regs-wan.h
@@ -29,8 +29,8 @@
 #define KS8695_WRDLB		(0x14)		/* Receive Descriptor List Base Address */
 #define KS8695_WMAL		(0x18)		/* MAC Station Address Low */
 #define KS8695_WMAH		(0x1c)		/* MAC Station Address High */
-#define KS8695_WMAAL_(n)	(0x80 + ((n)*8))	/* MAC Additional Station Address (0..15) Low */
-#define KS8695_WMAAH_(n)	(0x84 + ((n)*8))	/* MAC Additional Station Address (0..15) High */
+#define KS8695_WMAAL(n)		(0x80 + ((n)*8))	/* MAC Additional Station Address (0..15) Low */
+#define KS8695_WMAAH(n)		(0x84 + ((n)*8))	/* MAC Additional Station Address (0..15) High */
 
 
 /* DMA Transmit Control Register */