serial: delete the MCA specific 8250 support.

The support for CONFIG_MCA is being removed, since the 20
year old hardware simply isn't capable of meeting today's
software demands on CPU and memory resources.

This commit removes the MCA specific 8250 UART code.

Cc: Alan Cox <alan@linux.intel.com>
Cc: linux-serial@vger.kernel.org
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>

6 files changed, 11 insertions, 85 deletions

diff --git a/Documentation/serial/stallion.txt b/Documentation/serial/stallion.txt
index 55090914a9c..4d798c0cb5c 100644
--- a/Documentation/serial/stallion.txt
+++ b/Documentation/serial/stallion.txt
@@ -20,10 +20,10 @@ There are two drivers that work with the different families of Stallion
 multiport serial boards. One is for the Stallion smart boards - that is
 EasyIO, EasyConnection 8/32 and EasyConnection 8/64-PCI, the other for
 the true Stallion intelligent multiport boards - EasyConnection 8/64
-(ISA, EISA, MCA), EasyConnection/RA-PCI, ONboard and Brumby.
+(ISA, EISA), EasyConnection/RA-PCI, ONboard and Brumby.
 
 If you are using any of the Stallion intelligent multiport boards (Brumby,
-ONboard, EasyConnection 8/64 (ISA, EISA, MCA), EasyConnection/RA-PCI) with
+ONboard, EasyConnection 8/64 (ISA, EISA), EasyConnection/RA-PCI) with
 Linux you will need to get the driver utility package.  This contains a
 firmware loader and the firmware images necessary to make the devices operate.
 
@@ -40,7 +40,7 @@ If you are using the EasyIO, EasyConnection 8/32 or EasyConnection 8/64-PCI
 boards then you don't need this package, although it does have a serial stats
 display program.
 
-If you require DIP switch settings, EISA or MCA configuration files, or any
+If you require DIP switch settings, or EISA configuration files, or any
 other information related to Stallion boards then have a look at Stallion's
 web pages at http://www.stallion.com.
 
@@ -51,13 +51,13 @@ web pages at http://www.stallion.com.
 The drivers can be used as loadable modules or compiled into the kernel.
 You can choose which when doing a "config" on the kernel.
 
-All ISA, EISA and MCA boards that you want to use need to be configured into
+All ISA, and EISA boards that you want to use need to be configured into
 the driver(s). All PCI boards will be automatically detected when you load
 the driver - so they do not need to be entered into the driver(s)
 configuration structure. Note that kernel PCI support is required to use PCI
 boards.
 
-There are two methods of configuring ISA, EISA and MCA boards into the drivers.
+There are two methods of configuring ISA and EISA boards into the drivers.
 If using the driver as a loadable module then the simplest method is to pass
 the driver configuration as module arguments. The other method is to modify
 the driver source to add configuration lines for each board in use.
@@ -71,12 +71,12 @@ That makes things pretty simple to get going.
 2.1 MODULE DRIVER CONFIGURATION:
 
 The simplest configuration for modules is to use the module load arguments
-to configure any ISA, EISA or MCA boards. PCI boards are automatically
+to configure any ISA or EISA boards. PCI boards are automatically
 detected, so do not need any additional configuration at all.
 
-If using EasyIO, EasyConnection 8/32 ISA or MCA, or EasyConnection 8/63-PCI
+If using EasyIO, EasyConnection 8/32 ISA, or EasyConnection 8/63-PCI
 boards then use the "stallion" driver module, Otherwise if you are using
-an EasyConnection 8/64 ISA, EISA or MCA, EasyConnection/RA-PCI, ONboard,
+an EasyConnection 8/64 ISA or EISA, EasyConnection/RA-PCI, ONboard,
 Brumby or original Stallion board then use the "istallion" driver module.
 
 Typically to load up the smart board driver use:
@@ -146,7 +146,7 @@ on each system boot. Typically configuration files are put in the
 2.2 STATIC DRIVER CONFIGURATION:
 
 For static driver configuration you need to modify the driver source code.
-Entering ISA, EISA and MCA boards into the driver(s) configuration structure
+Entering ISA and EISA boards into the driver(s) configuration structure
 involves editing the driver(s) source file. It's pretty easy if you follow
 the instructions below. Both drivers can support up to 4 boards. The smart
 card driver (the stallion.c driver) supports any combination of EasyIO and
@@ -157,7 +157,7 @@ supports any combination of ONboards, Brumbys, Stallions and EasyConnection
 To set up the driver(s) for the boards that you want to use you need to
 edit the appropriate driver file and add configuration entries.
 
-If using EasyIO or EasyConnection 8/32 ISA or MCA boards,
+If using EasyIO or EasyConnection 8/32 ISA boards,
    In drivers/char/stallion.c:
       - find the definition of the stl_brdconf array (of structures)
         near the top of the file
@@ -243,7 +243,7 @@ change it on the board.
 On EasyIO and EasyConnection 8/32 boards the IRQ is software programmable, so
 if there is a conflict you may need to change the IRQ used for a board. There
 are no interrupts to worry about for ONboard, Brumby or EasyConnection 8/64
-(ISA, EISA and MCA) boards. The memory region on EasyConnection 8/64 and
+(ISA and EISA) boards. The memory region on EasyConnection 8/64 and
 ONboard boards is software programmable, but not on the Brumby boards.
 
 
diff --git a/drivers/tty/serial/8250/8250_mca.c b/drivers/tty/serial/8250/8250_mca.c
deleted file mode 100644
index d20abf04541..00000000000
--- a/drivers/tty/serial/8250/8250_mca.c
+++ /dev/null
@@ -1,61 +0,0 @@
-/*
- *  Copyright (C) 2005 Russell King.
- *  Data taken from include/asm-i386/serial.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/mca.h>
-#include <linux/serial_8250.h>
-
-/*
- * FIXME: Should we be doing AUTO_IRQ here?
- */
-#ifdef CONFIG_SERIAL_8250_DETECT_IRQ
-#define MCA_FLAGS	UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_AUTO_IRQ
-#else
-#define MCA_FLAGS	UPF_BOOT_AUTOCONF | UPF_SKIP_TEST
-#endif
-
-#define PORT(_base,_irq)			\
-	{					\
-		.iobase		= _base,	\
-		.irq		= _irq,		\
-		.uartclk	= 1843200,	\
-		.iotype		= UPIO_PORT,	\
-		.flags		= MCA_FLAGS,	\
-	}
-
-static struct plat_serial8250_port mca_data[] = {
-	PORT(0x3220, 3),
-	PORT(0x3228, 3),
-	PORT(0x4220, 3),
-	PORT(0x4228, 3),
-	PORT(0x5220, 3),
-	PORT(0x5228, 3),
-	{ },
-};
-
-static struct platform_device mca_device = {
-	.name			= "serial8250",
-	.id			= PLAT8250_DEV_MCA,
-	.dev			= {
-		.platform_data	= mca_data,
-	},
-};
-
-static int __init mca_init(void)
-{
-	if (!MCA_bus)
-		return -ENODEV;
-	return platform_device_register(&mca_device);
-}
-
-module_init(mca_init);
-
-MODULE_AUTHOR("Russell King");
-MODULE_DESCRIPTION("8250 serial probe module for MCA ports");
-MODULE_LICENSE("GPL");
diff --git a/drivers/tty/serial/8250/Kconfig b/drivers/tty/serial/8250/Kconfig
index 591f8018e7d..175c2041847 100644
--- a/drivers/tty/serial/8250/Kconfig
+++ b/drivers/tty/serial/8250/Kconfig
@@ -241,15 +241,6 @@ config SERIAL_8250_RSA
 	help
 	  ::: To be written :::
 
-config SERIAL_8250_MCA
-	tristate "Support 8250-type ports on MCA buses"
-	depends on SERIAL_8250 != n && MCA
-	help
-	  Say Y here if you have a MCA serial ports.
-
-	  To compile this driver as a module, choose M here: the module
-	  will be called 8250_mca.
-
 config SERIAL_8250_ACORN
 	tristate "Acorn expansion card serial port support"
 	depends on ARCH_ACORN && SERIAL_8250
diff --git a/drivers/tty/serial/8250/Makefile b/drivers/tty/serial/8250/Makefile
index 867bba73890..464320f52da 100644
--- a/drivers/tty/serial/8250/Makefile
+++ b/drivers/tty/serial/8250/Makefile
@@ -15,6 +15,5 @@ obj-$(CONFIG_SERIAL_8250_ACCENT)	+= 8250_accent.o
 obj-$(CONFIG_SERIAL_8250_BOCA)		+= 8250_boca.o
 obj-$(CONFIG_SERIAL_8250_EXAR_ST16C554)	+= 8250_exar_st16c554.o
 obj-$(CONFIG_SERIAL_8250_HUB6)		+= 8250_hub6.o
-obj-$(CONFIG_SERIAL_8250_MCA)		+= 8250_mca.o
 obj-$(CONFIG_SERIAL_8250_FSL)		+= 8250_fsl.o
 obj-$(CONFIG_SERIAL_8250_DW)		+= 8250_dw.o
diff --git a/include/linux/serial.h b/include/linux/serial.h
index 441980ecc4e..90e9f981358 100644
--- a/include/linux/serial.h
+++ b/include/linux/serial.h
@@ -130,7 +130,6 @@ struct serial_uart_config {
 #define ASYNCB_CHECK_CD		25 /* i.e., CLOCAL */
 #define ASYNCB_SHARE_IRQ	24 /* for multifunction cards, no longer used */
 #define ASYNCB_CONS_FLOW	23 /* flow control for console  */
-#define ASYNCB_BOOT_ONLYMCA	22 /* Probe only if MCA bus */
 #define ASYNCB_FIRST_KERNEL	22
 
 #define ASYNC_HUP_NOTIFY	(1U << ASYNCB_HUP_NOTIFY)
@@ -166,7 +165,6 @@ struct serial_uart_config {
 #define ASYNC_CHECK_CD		(1U << ASYNCB_CHECK_CD)
 #define ASYNC_SHARE_IRQ		(1U << ASYNCB_SHARE_IRQ)
 #define ASYNC_CONS_FLOW		(1U << ASYNCB_CONS_FLOW)
-#define ASYNC_BOOT_ONLYMCA	(1U << ASYNCB_BOOT_ONLYMCA)
 #define ASYNC_INTERNAL_FLAGS	(~((1U << ASYNCB_FIRST_KERNEL) - 1))
 
 /*
diff --git a/include/linux/serial_8250.h b/include/linux/serial_8250.h
index 8f012f8ac8e..6c5047dbfea 100644
--- a/include/linux/serial_8250.h
+++ b/include/linux/serial_8250.h
@@ -54,7 +54,6 @@ enum {
 	PLAT8250_DEV_BOCA,
 	PLAT8250_DEV_EXAR_ST16C554,
 	PLAT8250_DEV_HUB6,
-	PLAT8250_DEV_MCA,
 	PLAT8250_DEV_AU1X00,
 	PLAT8250_DEV_SM501,
 };