summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorArnaud Mandy <ext-arnaud.2.mandy@nokia.com>2009-12-28 13:40:40 +0200
committerGreg Kroah-Hartman <gregkh@suse.de>2010-03-02 14:53:47 -0800
commit1c25fda4a09e8229800979986ef399401053b46e (patch)
treef9a3282e5a787f89c457978ea7a83815e6c9147f
parent1ca9e9ca314c4757409a7f4e9c1f12229a175834 (diff)
usb: musb: handle irqs in the order dictated by programming guide
MUSB's programming guide dictates how we should handle its irqs and in which order. Follow that. Signed-off-by: Arnaud Mandy <ext-arnaud.2.mandy@nokia.com> Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-rw-r--r--drivers/usb/musb/musb_core.c255
1 files changed, 116 insertions, 139 deletions
diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index c4893267b4e..bd14e816df9 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -557,6 +557,69 @@ static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb,
handled = IRQ_HANDLED;
}
+
+ if (int_usb & MUSB_INTR_SUSPEND) {
+ DBG(1, "SUSPEND (%s) devctl %02x power %02x\n",
+ otg_state_string(musb), devctl, power);
+ handled = IRQ_HANDLED;
+
+ switch (musb->xceiv->state) {
+#ifdef CONFIG_USB_MUSB_OTG
+ case OTG_STATE_A_PERIPHERAL:
+ /* We also come here if the cable is removed, since
+ * this silicon doesn't report ID-no-longer-grounded.
+ *
+ * We depend on T(a_wait_bcon) to shut us down, and
+ * hope users don't do anything dicey during this
+ * undesired detour through A_WAIT_BCON.
+ */
+ musb_hnp_stop(musb);
+ usb_hcd_resume_root_hub(musb_to_hcd(musb));
+ musb_root_disconnect(musb);
+ musb_platform_try_idle(musb, jiffies
+ + msecs_to_jiffies(musb->a_wait_bcon
+ ? : OTG_TIME_A_WAIT_BCON));
+
+ break;
+#endif
+ case OTG_STATE_B_IDLE:
+ if (!musb->is_active)
+ break;
+ case OTG_STATE_B_PERIPHERAL:
+ musb_g_suspend(musb);
+ musb->is_active = is_otg_enabled(musb)
+ && musb->xceiv->gadget->b_hnp_enable;
+ if (musb->is_active) {
+#ifdef CONFIG_USB_MUSB_OTG
+ musb->xceiv->state = OTG_STATE_B_WAIT_ACON;
+ DBG(1, "HNP: Setting timer for b_ase0_brst\n");
+ mod_timer(&musb->otg_timer, jiffies
+ + msecs_to_jiffies(
+ OTG_TIME_B_ASE0_BRST));
+#endif
+ }
+ break;
+ case OTG_STATE_A_WAIT_BCON:
+ if (musb->a_wait_bcon != 0)
+ musb_platform_try_idle(musb, jiffies
+ + msecs_to_jiffies(musb->a_wait_bcon));
+ break;
+ case OTG_STATE_A_HOST:
+ musb->xceiv->state = OTG_STATE_A_SUSPEND;
+ musb->is_active = is_otg_enabled(musb)
+ && musb->xceiv->host->b_hnp_enable;
+ break;
+ case OTG_STATE_B_HOST:
+ /* Transition to B_PERIPHERAL, see 6.8.2.6 p 44 */
+ DBG(1, "REVISIT: SUSPEND as B_HOST\n");
+ break;
+ default:
+ /* "should not happen" */
+ musb->is_active = 0;
+ break;
+ }
+ }
+
if (int_usb & MUSB_INTR_CONNECT) {
struct usb_hcd *hcd = musb_to_hcd(musb);
@@ -625,10 +688,61 @@ b_host:
}
#endif /* CONFIG_USB_MUSB_HDRC_HCD */
+ if ((int_usb & MUSB_INTR_DISCONNECT) && !musb->ignore_disconnect) {
+ DBG(1, "DISCONNECT (%s) as %s, devctl %02x\n",
+ otg_state_string(musb),
+ MUSB_MODE(musb), devctl);
+ handled = IRQ_HANDLED;
+
+ switch (musb->xceiv->state) {
+#ifdef CONFIG_USB_MUSB_HDRC_HCD
+ case OTG_STATE_A_HOST:
+ case OTG_STATE_A_SUSPEND:
+ usb_hcd_resume_root_hub(musb_to_hcd(musb));
+ musb_root_disconnect(musb);
+ if (musb->a_wait_bcon != 0 && is_otg_enabled(musb))
+ musb_platform_try_idle(musb, jiffies
+ + msecs_to_jiffies(musb->a_wait_bcon));
+ break;
+#endif /* HOST */
+#ifdef CONFIG_USB_MUSB_OTG
+ case OTG_STATE_B_HOST:
+ /* REVISIT this behaves for "real disconnect"
+ * cases; make sure the other transitions from
+ * from B_HOST act right too. The B_HOST code
+ * in hnp_stop() is currently not used...
+ */
+ musb_root_disconnect(musb);
+ musb_to_hcd(musb)->self.is_b_host = 0;
+ musb->xceiv->state = OTG_STATE_B_PERIPHERAL;
+ MUSB_DEV_MODE(musb);
+ musb_g_disconnect(musb);
+ break;
+ case OTG_STATE_A_PERIPHERAL:
+ musb_hnp_stop(musb);
+ musb_root_disconnect(musb);
+ /* FALLTHROUGH */
+ case OTG_STATE_B_WAIT_ACON:
+ /* FALLTHROUGH */
+#endif /* OTG */
+#ifdef CONFIG_USB_GADGET_MUSB_HDRC
+ case OTG_STATE_B_PERIPHERAL:
+ case OTG_STATE_B_IDLE:
+ musb_g_disconnect(musb);
+ break;
+#endif /* GADGET */
+ default:
+ WARNING("unhandled DISCONNECT transition (%s)\n",
+ otg_state_string(musb));
+ break;
+ }
+ }
+
/* mentor saves a bit: bus reset and babble share the same irq.
* only host sees babble; only peripheral sees bus reset.
*/
if (int_usb & MUSB_INTR_RESET) {
+ handled = IRQ_HANDLED;
if (is_host_capable() && (devctl & MUSB_DEVCTL_HM) != 0) {
/*
* Looks like non-HS BABBLE can be ignored, but
@@ -641,7 +755,7 @@ b_host:
DBG(1, "BABBLE devctl: %02x\n", devctl);
else {
ERR("Stopping host session -- babble\n");
- musb_writeb(mbase, MUSB_DEVCTL, 0);
+ musb_writeb(musb->mregs, MUSB_DEVCTL, 0);
}
} else if (is_peripheral_capable()) {
DBG(1, "BUS RESET as %s\n", otg_state_string(musb));
@@ -686,29 +800,7 @@ b_host:
otg_state_string(musb));
}
}
-
- handled = IRQ_HANDLED;
}
- schedule_work(&musb->irq_work);
-
- return handled;
-}
-
-/*
- * Interrupt Service Routine to record USB "global" interrupts.
- * Since these do not happen often and signify things of
- * paramount importance, it seems OK to check them individually;
- * the order of the tests is specified in the manual
- *
- * @param musb instance pointer
- * @param int_usb register contents
- * @param devctl
- * @param power
- */
-static irqreturn_t musb_stage2_irq(struct musb *musb, u8 int_usb,
- u8 devctl, u8 power)
-{
- irqreturn_t handled = IRQ_NONE;
#if 0
/* REVISIT ... this would be for multiplexing periodic endpoints, or
@@ -755,117 +847,7 @@ static irqreturn_t musb_stage2_irq(struct musb *musb, u8 int_usb,
}
#endif
- if ((int_usb & MUSB_INTR_DISCONNECT) && !musb->ignore_disconnect) {
- DBG(1, "DISCONNECT (%s) as %s, devctl %02x\n",
- otg_state_string(musb),
- MUSB_MODE(musb), devctl);
- handled = IRQ_HANDLED;
-
- switch (musb->xceiv->state) {
-#ifdef CONFIG_USB_MUSB_HDRC_HCD
- case OTG_STATE_A_HOST:
- case OTG_STATE_A_SUSPEND:
- usb_hcd_resume_root_hub(musb_to_hcd(musb));
- musb_root_disconnect(musb);
- if (musb->a_wait_bcon != 0 && is_otg_enabled(musb))
- musb_platform_try_idle(musb, jiffies
- + msecs_to_jiffies(musb->a_wait_bcon));
- break;
-#endif /* HOST */
-#ifdef CONFIG_USB_MUSB_OTG
- case OTG_STATE_B_HOST:
- /* REVISIT this behaves for "real disconnect"
- * cases; make sure the other transitions from
- * from B_HOST act right too. The B_HOST code
- * in hnp_stop() is currently not used...
- */
- musb_root_disconnect(musb);
- musb_to_hcd(musb)->self.is_b_host = 0;
- musb->xceiv->state = OTG_STATE_B_PERIPHERAL;
- MUSB_DEV_MODE(musb);
- musb_g_disconnect(musb);
- break;
- case OTG_STATE_A_PERIPHERAL:
- musb_hnp_stop(musb);
- musb_root_disconnect(musb);
- /* FALLTHROUGH */
- case OTG_STATE_B_WAIT_ACON:
- /* FALLTHROUGH */
-#endif /* OTG */
-#ifdef CONFIG_USB_GADGET_MUSB_HDRC
- case OTG_STATE_B_PERIPHERAL:
- case OTG_STATE_B_IDLE:
- musb_g_disconnect(musb);
- break;
-#endif /* GADGET */
- default:
- WARNING("unhandled DISCONNECT transition (%s)\n",
- otg_state_string(musb));
- break;
- }
-
- schedule_work(&musb->irq_work);
- }
-
- if (int_usb & MUSB_INTR_SUSPEND) {
- DBG(1, "SUSPEND (%s) devctl %02x power %02x\n",
- otg_state_string(musb), devctl, power);
- handled = IRQ_HANDLED;
-
- switch (musb->xceiv->state) {
-#ifdef CONFIG_USB_MUSB_OTG
- case OTG_STATE_A_PERIPHERAL:
- /* We also come here if the cable is removed, since
- * this silicon doesn't report ID-no-longer-grounded.
- *
- * We depend on T(a_wait_bcon) to shut us down, and
- * hope users don't do anything dicey during this
- * undesired detour through A_WAIT_BCON.
- */
- musb_hnp_stop(musb);
- usb_hcd_resume_root_hub(musb_to_hcd(musb));
- musb_root_disconnect(musb);
- musb_platform_try_idle(musb, jiffies
- + msecs_to_jiffies(musb->a_wait_bcon
- ? : OTG_TIME_A_WAIT_BCON));
- break;
-#endif
- case OTG_STATE_B_PERIPHERAL:
- musb_g_suspend(musb);
- musb->is_active = is_otg_enabled(musb)
- && musb->xceiv->gadget->b_hnp_enable;
- if (musb->is_active) {
-#ifdef CONFIG_USB_MUSB_OTG
- musb->xceiv->state = OTG_STATE_B_WAIT_ACON;
- DBG(1, "HNP: Setting timer for b_ase0_brst\n");
- mod_timer(&musb->otg_timer, jiffies
- + msecs_to_jiffies(
- OTG_TIME_B_ASE0_BRST));
-#endif
- }
- break;
- case OTG_STATE_A_WAIT_BCON:
- if (musb->a_wait_bcon != 0)
- musb_platform_try_idle(musb, jiffies
- + msecs_to_jiffies(musb->a_wait_bcon));
- break;
- case OTG_STATE_A_HOST:
- musb->xceiv->state = OTG_STATE_A_SUSPEND;
- musb->is_active = is_otg_enabled(musb)
- && musb->xceiv->host->b_hnp_enable;
- break;
- case OTG_STATE_B_HOST:
- /* Transition to B_PERIPHERAL, see 6.8.2.6 p 44 */
- DBG(1, "REVISIT: SUSPEND as B_HOST\n");
- break;
- default:
- /* "should not happen" */
- musb->is_active = 0;
- break;
- }
- schedule_work(&musb->irq_work);
- }
-
+ schedule_work(&musb->irq_work);
return handled;
}
@@ -1597,11 +1579,6 @@ irqreturn_t musb_interrupt(struct musb *musb)
ep_num++;
}
- /* finish handling "global" interrupts after handling fifos */
- if (musb->int_usb)
- retval |= musb_stage2_irq(musb,
- musb->int_usb, devctl, power);
-
return retval;
}