summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorRalf Baechle <ralf@linux-mips.org>2005-02-03 14:28:23 +0000
committerRalf Baechle <ralf@linux-mips.org>2005-10-29 19:30:23 +0100
commit38b18f72587422450bd01695b471b3ae2ff4b169 (patch)
tree83485240e1bfcd80c7a8c368844e541a826fc7ba
parentdb89a48c1f2fa9197404ca511d9df808196ca25d (diff)
Move Sibyte Kconfig stuff into it's own Kconfig.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-rw-r--r--arch/mips/Kconfig218
-rw-r--r--arch/mips/sibyte/Kconfig143
2 files changed, 145 insertions, 216 deletions
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index bfd5014a8af..87f860feb84 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -749,222 +749,6 @@ config MIPS_MTX1
endchoice
-config SIBYTE_SB1xxx_SOC
- bool "Support for Broadcom BCM1xxx SOCs (EXPERIMENTAL)"
- depends on EXPERIMENTAL
- select BOOT_ELF32
- select DMA_COHERENT
- select SWAP_IO_SPACE
- select SYS_SUPPORTS_32BIT_KERNEL
- select SYS_SUPPORTS_64BIT_KERNEL
-
-choice
- prompt "BCM1xxx SOC-based board"
- depends on SIBYTE_SB1xxx_SOC
- default SIBYTE_SWARM
- help
- Enable support for boards based on the SiByte line of SOCs
- from Broadcom. There are configurations for the known
- evaluation boards, or you can choose "Other" and add your
- own board support code.
-
-config SIBYTE_SWARM
- bool "BCM91250A-SWARM"
- select SIBYTE_SB1250
-
-config SIBYTE_SENTOSA
- bool "BCM91250E-Sentosa"
- select SIBYTE_SB1250
-
-config SIBYTE_RHONE
- bool "BCM91125E-Rhone"
- select SIBYTE_BCM1125H
-
-config SIBYTE_CARMEL
- bool "BCM91120x-Carmel"
- select SIBYTE_BCM1120
-
-config SIBYTE_PTSWARM
- bool "BCM91250PT-PTSWARM"
- select SIBYTE_SB1250
-
-config SIBYTE_LITTLESUR
- bool "BCM91250C2-LittleSur"
- select SIBYTE_SB1250
-
-config SIBYTE_CRHINE
- bool "BCM91120C-CRhine"
- select SIBYTE_BCM1120
-
-config SIBYTE_CRHONE
- bool "BCM91125C-CRhone"
- select SIBYTE_BCM1125
-
-config SIBYTE_UNKNOWN
- bool "Other"
-
-endchoice
-
-config SIBYTE_BOARD
- bool
- depends on SIBYTE_SB1xxx_SOC && !SIBYTE_UNKNOWN
- default y
-
-choice
- prompt "BCM1xxx SOC Type"
- depends on SIBYTE_UNKNOWN
- default SIBYTE_UNK_BCM1250
- help
- Since you haven't chosen a known evaluation board from
- Broadcom, you must explicitly pick the SOC this kernel is
- targetted for.
-
-config SIBYTE_UNK_BCM1250
- bool "BCM1250"
- select SIBYTE_SB1250
-
-config SIBYTE_UNK_BCM1120
- bool "BCM1120"
- select SIBYTE_BCM1120
-
-config SIBYTE_UNK_BCM1125
- bool "BCM1125"
- select SIBYTE_BCM1125
-
-config SIBYTE_UNK_BCM1125H
- bool "BCM1125H"
- select SIBYTE_BCM1125H
-
-endchoice
-
-config SIBYTE_SB1250
- bool
- select HW_HAS_PCI
-
-config SIBYTE_BCM1120
- bool
- select SIBYTE_BCM112X
-
-config SIBYTE_BCM1125
- bool
- select HW_HAS_PCI
- select SIBYTE_BCM112X
-
-config SIBYTE_BCM1125H
- bool
- select HW_HAS_PCI
- select SIBYTE_BCM112X
-
-config SIBYTE_BCM112X
- bool
-
-choice
- prompt "SiByte SOC Stepping"
- depends on SIBYTE_SB1xxx_SOC
-
-config CPU_SB1_PASS_1
- bool "1250 Pass1"
- depends on SIBYTE_SB1250
- select CPU_HAS_PREFETCH
-
-config CPU_SB1_PASS_2_1250
- bool "1250 An"
- depends on SIBYTE_SB1250
- select CPU_SB1_PASS_2
- help
- Also called BCM1250 Pass 2
-
-config CPU_SB1_PASS_2_2
- bool "1250 Bn"
- depends on SIBYTE_SB1250
- select CPU_HAS_PREFETCH
- help
- Also called BCM1250 Pass 2.2
-
-config CPU_SB1_PASS_4
- bool "1250 Cn"
- depends on SIBYTE_SB1250
- select CPU_HAS_PREFETCH
- help
- Also called BCM1250 Pass 3
-
-config CPU_SB1_PASS_2_112x
- bool "112x Hybrid"
- depends on SIBYTE_BCM112X
- select CPU_SB1_PASS_2
-
-config CPU_SB1_PASS_3
- bool "112x An"
- depends on SIBYTE_BCM112X
- select CPU_HAS_PREFETCH
-
-endchoice
-
-config CPU_SB1_PASS_2
- bool
-
-config SIBYTE_HAS_LDT
- bool
- depends on PCI && (SIBYTE_SB1250 || SIBYTE_BCM1125H)
- default y
-
-config SIMULATION
- bool "Running under simulation"
- depends on SIBYTE_SB1xxx_SOC
- help
- Build a kernel suitable for running under the GDB simulator.
- Primarily adjusts the kernel's notion of time.
-
-config SIBYTE_CFE
- bool "Booting from CFE"
- depends on SIBYTE_SB1xxx_SOC
- help
- Make use of the CFE API for enumerating available memory,
- controlling secondary CPUs, and possibly console output.
-
-config SIBYTE_CFE_CONSOLE
- bool "Use firmware console"
- depends on SIBYTE_CFE
- help
- Use the CFE API's console write routines during boot. Other console
- options (VT console, sb1250 duart console, etc.) should not be
- configured.
-
-config SIBYTE_STANDALONE
- bool
- depends on SIBYTE_SB1xxx_SOC && !SIBYTE_CFE
- default y
-
-config SIBYTE_STANDALONE_RAM_SIZE
- int "Memory size (in megabytes)"
- depends on SIBYTE_STANDALONE
- default "32"
-
-config SIBYTE_BUS_WATCHER
- bool "Support for Bus Watcher statistics"
- depends on SIBYTE_SB1xxx_SOC
- help
- Handle and keep statistics on the bus error interrupts (COR_ECC,
- BAD_ECC, IO_BUS).
-
-config SIBYTE_BW_TRACE
- bool "Capture bus trace before bus error"
- depends on SIBYTE_BUS_WATCHER
- help
- Run a continuous bus trace, dumping the raw data as soon as
- a ZBbus error is detected. Cannot work if ZBbus profiling
- is turned on, and also will interfere with JTAG-based trace
- buffer activity. Raw buffer data is dumped to console, and
- must be processed off-line.
-
-config SIBYTE_SB1250_PROF
- bool "Support for SB1/SOC profiling - SB1/SCD perf counters"
- depends on SIBYTE_SB1xxx_SOC
-
-config SIBYTE_TBPROF
- bool "Support for ZBbus profiling"
- depends on SIBYTE_SB1xxx_SOC
-
config SNI_RM200_PCI
bool "Support for SNI RM200 PCI"
select ARC
@@ -1002,6 +786,8 @@ config TOSHIBA_FPCIB0
bool "FPCIB0 Backplane Support"
depends on TOSHIBA_RBTX4927
+source "arch/mips/sibyte/Kconfig"
+
config RWSEM_GENERIC_SPINLOCK
bool
default y
diff --git a/arch/mips/sibyte/Kconfig b/arch/mips/sibyte/Kconfig
new file mode 100644
index 00000000000..3618d61f004
--- /dev/null
+++ b/arch/mips/sibyte/Kconfig
@@ -0,0 +1,143 @@
+config SIBYTE_SB1250
+ bool
+ select HW_HAS_PCI
+ select SIBYTE_HAS_LDT
+ select SIBYTE_SB1xxx_SOC
+
+config SIBYTE_BCM1120
+ bool
+ select SIBYTE_BCM112X
+ select SIBYTE_SB1xxx_SOC
+
+config SIBYTE_BCM1125
+ bool
+ select HW_HAS_PCI
+ select SIBYTE_BCM112X
+ select SIBYTE_SB1xxx_SOC
+
+config SIBYTE_BCM1125H
+ bool
+ select HW_HAS_PCI
+ select SIBYTE_BCM112X
+ select SIBYTE_HAS_LDT
+ select SIBYTE_SB1xxx_SOC
+
+config SIBYTE_BCM112X
+ bool
+ select SIBYTE_SB1xxx_SOC
+
+config SIBYTE_SB1xxx_SOC
+ bool
+ depends on EXPERIMENTAL
+ select DMA_COHERENT
+ select SIBYTE_CFE
+ select SWAP_IO_SPACE
+ select SYS_SUPPORTS_32BIT_KERNEL
+ select SYS_SUPPORTS_64BIT_KERNEL
+
+choice
+ prompt "SiByte SOC Stepping"
+ depends on SIBYTE_SB1xxx_SOC
+
+config CPU_SB1_PASS_1
+ bool "1250 Pass1"
+ depends on SIBYTE_SB1250
+ select CPU_HAS_PREFETCH
+
+config CPU_SB1_PASS_2_1250
+ bool "1250 An"
+ depends on SIBYTE_SB1250
+ select CPU_SB1_PASS_2
+ help
+ Also called BCM1250 Pass 2
+
+config CPU_SB1_PASS_2_2
+ bool "1250 Bn"
+ depends on SIBYTE_SB1250
+ select CPU_HAS_PREFETCH
+ help
+ Also called BCM1250 Pass 2.2
+
+config CPU_SB1_PASS_4
+ bool "1250 Cn"
+ depends on SIBYTE_SB1250
+ select CPU_HAS_PREFETCH
+ help
+ Also called BCM1250 Pass 3
+
+config CPU_SB1_PASS_2_112x
+ bool "112x Hybrid"
+ depends on SIBYTE_BCM112X
+ select CPU_SB1_PASS_2
+
+config CPU_SB1_PASS_3
+ bool "112x An"
+ depends on SIBYTE_BCM112X
+ select CPU_HAS_PREFETCH
+
+endchoice
+
+config CPU_SB1_PASS_2
+ bool
+
+config SIBYTE_HAS_LDT
+ bool
+ depends on PCI && (SIBYTE_SB1250 || SIBYTE_BCM1125H)
+ default y
+
+config SIMULATION
+ bool "Running under simulation"
+ depends on SIBYTE_SB1xxx_SOC
+ help
+ Build a kernel suitable for running under the GDB simulator.
+ Primarily adjusts the kernel's notion of time.
+
+config SIBYTE_CFE
+ bool "Booting from CFE"
+ depends on SIBYTE_SB1xxx_SOC
+ help
+ Make use of the CFE API for enumerating available memory,
+ controlling secondary CPUs, and possibly console output.
+
+config SIBYTE_CFE_CONSOLE
+ bool "Use firmware console"
+ depends on SIBYTE_CFE
+ help
+ Use the CFE API's console write routines during boot. Other console
+ options (VT console, sb1250 duart console, etc.) should not be
+ configured.
+
+config SIBYTE_STANDALONE
+ bool
+ depends on SIBYTE_SB1xxx_SOC && !SIBYTE_CFE
+ default y
+
+config SIBYTE_STANDALONE_RAM_SIZE
+ int "Memory size (in megabytes)"
+ depends on SIBYTE_STANDALONE
+ default "32"
+
+config SIBYTE_BUS_WATCHER
+ bool "Support for Bus Watcher statistics"
+ depends on SIBYTE_SB1xxx_SOC
+ help
+ Handle and keep statistics on the bus error interrupts (COR_ECC,
+ BAD_ECC, IO_BUS).
+
+config SIBYTE_BW_TRACE
+ bool "Capture bus trace before bus error"
+ depends on SIBYTE_BUS_WATCHER
+ help
+ Run a continuous bus trace, dumping the raw data as soon as
+ a ZBbus error is detected. Cannot work if ZBbus profiling
+ is turned on, and also will interfere with JTAG-based trace
+ buffer activity. Raw buffer data is dumped to console, and
+ must be processed off-line.
+
+config SIBYTE_SB1250_PROF
+ bool "Support for SB1/SOC profiling - SB1/SCD perf counters"
+ depends on SIBYTE_SB1xxx_SOC
+
+config SIBYTE_TBPROF
+ bool "Support for ZBbus profiling"
+ depends on SIBYTE_SB1xxx_SOC