summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorHaavard Skinnemoen <haavard.skinnemoen@atmel.com>2009-01-06 14:41:43 -0800
committerLinus Torvalds <torvalds@linux-foundation.org>2009-01-06 15:59:19 -0800
commit5ee36c989831ab720eee282521462cce0a3c4900 (patch)
treeae9e07d024bfa1d5f360aafc6401e3797350a7f5
parent5bfa26ca1332780dfeeabafd7f169fc6fb48ba30 (diff)
spi: atmel_spi update chipselect handling
This solves several issues: * It fixes the wrong idle clock polarity issue in a cleaner and less expensive way. * It handles the AT32AP7000 errata "SPI Chip Select 0 BITS field overrides other Chip Selects". Other chips, e.g. AT91SAM9261, have similar issues. Currently, the AT91RM9200 code path is left alone. But it might be interesting to try the same technique on RM9200 using a different CSR register. [dbrownell@users.sourceforge.net: restore debug message for activation] Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-rw-r--r--drivers/spi/atmel_spi.c93
1 files changed, 67 insertions, 26 deletions
diff --git a/drivers/spi/atmel_spi.c b/drivers/spi/atmel_spi.c
index b4f7f1c286e..5e39bac9c51 100644
--- a/drivers/spi/atmel_spi.c
+++ b/drivers/spi/atmel_spi.c
@@ -51,6 +51,12 @@ struct atmel_spi {
dma_addr_t buffer_dma;
};
+/* Controller-specific per-slave state */
+struct atmel_spi_device {
+ unsigned int npcs_pin;
+ u32 csr;
+};
+
#define BUFFER_SIZE PAGE_SIZE
#define INVALID_DMA_ADDRESS 0xffffffff
@@ -89,39 +95,58 @@ static bool atmel_spi_is_v2(void)
* Master on Chip Select 0.") No workaround exists for that ... so for
* nCS0 on that chip, we (a) don't use the GPIO, (b) can't support CS_HIGH,
* and (c) will trigger that first erratum in some cases.
+ *
+ * TODO: Test if the atmel_spi_is_v2() branch below works on
+ * AT91RM9200 if we use some other register than CSR0. However, don't
+ * do this unconditionally since AP7000 has an errata where the BITS
+ * field in CSR0 overrides all other CSRs.
*/
static void cs_activate(struct atmel_spi *as, struct spi_device *spi)
{
- unsigned gpio = (unsigned) spi->controller_data;
+ struct atmel_spi_device *asd = spi->controller_state;
unsigned active = spi->mode & SPI_CS_HIGH;
u32 mr;
- int i;
- u32 csr;
- u32 cpol = (spi->mode & SPI_CPOL) ? SPI_BIT(CPOL) : 0;
-
- /* Make sure clock polarity is correct */
- for (i = 0; i < spi->master->num_chipselect; i++) {
- csr = spi_readl(as, CSR0 + 4 * i);
- if ((csr ^ cpol) & SPI_BIT(CPOL))
- spi_writel(as, CSR0 + 4 * i, csr ^ SPI_BIT(CPOL));
- }
- mr = spi_readl(as, MR);
- mr = SPI_BFINS(PCS, ~(1 << spi->chip_select), mr);
+ if (atmel_spi_is_v2()) {
+ /*
+ * Always use CSR0. This ensures that the clock
+ * switches to the correct idle polarity before we
+ * toggle the CS.
+ */
+ spi_writel(as, CSR0, asd->csr);
+ spi_writel(as, MR, SPI_BF(PCS, 0x0e) | SPI_BIT(MODFDIS)
+ | SPI_BIT(MSTR));
+ mr = spi_readl(as, MR);
+ gpio_set_value(asd->npcs_pin, active);
+ } else {
+ u32 cpol = (spi->mode & SPI_CPOL) ? SPI_BIT(CPOL) : 0;
+ int i;
+ u32 csr;
+
+ /* Make sure clock polarity is correct */
+ for (i = 0; i < spi->master->num_chipselect; i++) {
+ csr = spi_readl(as, CSR0 + 4 * i);
+ if ((csr ^ cpol) & SPI_BIT(CPOL))
+ spi_writel(as, CSR0 + 4 * i,
+ csr ^ SPI_BIT(CPOL));
+ }
+
+ mr = spi_readl(as, MR);
+ mr = SPI_BFINS(PCS, ~(1 << spi->chip_select), mr);
+ if (spi->chip_select != 0)
+ gpio_set_value(asd->npcs_pin, active);
+ spi_writel(as, MR, mr);
+ }
dev_dbg(&spi->dev, "activate %u%s, mr %08x\n",
- gpio, active ? " (high)" : "",
+ asd->npcs_pin, active ? " (high)" : "",
mr);
-
- if (atmel_spi_is_v2() || spi->chip_select != 0)
- gpio_set_value(gpio, active);
- spi_writel(as, MR, mr);
}
static void cs_deactivate(struct atmel_spi *as, struct spi_device *spi)
{
- unsigned gpio = (unsigned) spi->controller_data;
+ struct atmel_spi_device *asd = spi->controller_state;
unsigned active = spi->mode & SPI_CS_HIGH;
u32 mr;
@@ -135,11 +160,11 @@ static void cs_deactivate(struct atmel_spi *as, struct spi_device *spi)
}
dev_dbg(&spi->dev, "DEactivate %u%s, mr %08x\n",
- gpio, active ? " (low)" : "",
+ asd->npcs_pin, active ? " (low)" : "",
mr);
if (atmel_spi_is_v2() || spi->chip_select != 0)
- gpio_set_value(gpio, !active);
+ gpio_set_value(asd->npcs_pin, !active);
}
static inline int atmel_spi_xfer_is_last(struct spi_message *msg,
@@ -511,6 +536,7 @@ atmel_spi_interrupt(int irq, void *dev_id)
static int atmel_spi_setup(struct spi_device *spi)
{
struct atmel_spi *as;
+ struct atmel_spi_device *asd;
u32 scbr, csr;
unsigned int bits = spi->bits_per_word;
unsigned long bus_hz;
@@ -595,11 +621,20 @@ static int atmel_spi_setup(struct spi_device *spi)
/* chipselect must have been muxed as GPIO (e.g. in board setup) */
npcs_pin = (unsigned int)spi->controller_data;
- if (!spi->controller_state) {
+ asd = spi->controller_state;
+ if (!asd) {
+ asd = kzalloc(sizeof(struct atmel_spi_device), GFP_KERNEL);
+ if (!asd)
+ return -ENOMEM;
+
ret = gpio_request(npcs_pin, spi->dev.bus_id);
- if (ret)
+ if (ret) {
+ kfree(asd);
return ret;
- spi->controller_state = (void *)npcs_pin;
+ }
+
+ asd->npcs_pin = npcs_pin;
+ spi->controller_state = asd;
gpio_direction_output(npcs_pin, !(spi->mode & SPI_CS_HIGH));
} else {
unsigned long flags;
@@ -611,11 +646,14 @@ static int atmel_spi_setup(struct spi_device *spi)
spin_unlock_irqrestore(&as->lock, flags);
}
+ asd->csr = csr;
+
dev_dbg(&spi->dev,
"setup: %lu Hz bpw %u mode 0x%x -> csr%d %08x\n",
bus_hz / scbr, bits, spi->mode, spi->chip_select, csr);
- spi_writel(as, CSR0 + 4 * spi->chip_select, csr);
+ if (!atmel_spi_is_v2())
+ spi_writel(as, CSR0 + 4 * spi->chip_select, csr);
return 0;
}
@@ -690,10 +728,11 @@ static int atmel_spi_transfer(struct spi_device *spi, struct spi_message *msg)
static void atmel_spi_cleanup(struct spi_device *spi)
{
struct atmel_spi *as = spi_master_get_devdata(spi->master);
+ struct atmel_spi_device *asd = spi->controller_state;
unsigned gpio = (unsigned) spi->controller_data;
unsigned long flags;
- if (!spi->controller_state)
+ if (!asd)
return;
spin_lock_irqsave(&as->lock, flags);
@@ -703,7 +742,9 @@ static void atmel_spi_cleanup(struct spi_device *spi)
}
spin_unlock_irqrestore(&as->lock, flags);
+ spi->controller_state = NULL;
gpio_free(gpio);
+ kfree(asd);
}
/*-------------------------------------------------------------------------*/