summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorEmil Tantilov <emil.s.tantilov@intel.com>2011-02-19 08:43:44 +0000
committerJeff Kirsher <jeffrey.t.kirsher@intel.com>2011-03-03 04:20:18 -0800
commit8c7bea32c4ebe02dbb574a49db418036da177326 (patch)
treeb6c0928b4fb646a661d8b08ca72634dcab503805
parent63d778df6d817ea69cadd701abbfa1c491623b50 (diff)
ixgbe: Numerous whitespace / formatting cleanups
This patch contains a number of whitespace and formatting cleanups. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Stephen Ko <stephen.s.ko@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-rw-r--r--drivers/net/ixgbe/ixgbe_82598.c7
-rw-r--r--drivers/net/ixgbe/ixgbe_82599.c19
-rw-r--r--drivers/net/ixgbe/ixgbe_common.c7
3 files changed, 15 insertions, 18 deletions
diff --git a/drivers/net/ixgbe/ixgbe_82598.c b/drivers/net/ixgbe/ixgbe_82598.c
index a5b83b775b6..8f5e347ac00 100644
--- a/drivers/net/ixgbe/ixgbe_82598.c
+++ b/drivers/net/ixgbe/ixgbe_82598.c
@@ -627,7 +627,6 @@ out:
return 0;
}
-
/**
* ixgbe_setup_mac_link_82598 - Set MAC link speed
* @hw: pointer to hardware structure
@@ -698,7 +697,6 @@ static s32 ixgbe_setup_copper_link_82598(struct ixgbe_hw *hw,
/* Setup the PHY according to input speed */
status = hw->phy.ops.setup_link_speed(hw, speed, autoneg,
autoneg_wait_to_complete);
-
/* Set up MAC */
ixgbe_start_mac_link_82598(hw, autoneg_wait_to_complete);
@@ -1013,13 +1011,12 @@ static s32 ixgbe_write_analog_reg8_82598(struct ixgbe_hw *hw, u32 reg, u8 val)
}
/**
- * ixgbe_read_i2c_eeprom_82598 - Read 8 bit EEPROM word of an SFP+ module
- * over I2C interface through an intermediate phy.
+ * ixgbe_read_i2c_eeprom_82598 - Reads 8 bit word over I2C interface.
* @hw: pointer to hardware structure
* @byte_offset: EEPROM byte offset to read
* @eeprom_data: value read
*
- * Performs byte read operation to SFP module's EEPROM over I2C interface.
+ * Performs 8 byte read operation to SFP module's EEPROM over I2C interface.
**/
static s32 ixgbe_read_i2c_eeprom_82598(struct ixgbe_hw *hw, u8 byte_offset,
u8 *eeprom_data)
diff --git a/drivers/net/ixgbe/ixgbe_82599.c b/drivers/net/ixgbe/ixgbe_82599.c
index 69d345b1ecf..5e2edcd1244 100644
--- a/drivers/net/ixgbe/ixgbe_82599.c
+++ b/drivers/net/ixgbe/ixgbe_82599.c
@@ -417,14 +417,14 @@ static s32 ixgbe_start_mac_link_82599(struct ixgbe_hw *hw,
return status;
}
- /**
- * ixgbe_disable_tx_laser_multispeed_fiber - Disable Tx laser
- * @hw: pointer to hardware structure
- *
- * The base drivers may require better control over SFP+ module
- * PHY states. This includes selectively shutting down the Tx
- * laser on the PHY, effectively halting physical link.
- **/
+/**
+ * ixgbe_disable_tx_laser_multispeed_fiber - Disable Tx laser
+ * @hw: pointer to hardware structure
+ *
+ * The base drivers may require better control over SFP+ module
+ * PHY states. This includes selectively shutting down the Tx
+ * laser on the PHY, effectively halting physical link.
+ **/
static void ixgbe_disable_tx_laser_multispeed_fiber(struct ixgbe_hw *hw)
{
u32 esdp_reg = IXGBE_READ_REG(hw, IXGBE_ESDP);
@@ -542,7 +542,6 @@ s32 ixgbe_setup_mac_link_multispeed_fiber(struct ixgbe_hw *hw,
* Section 73.10.2, we may have to wait up to 500ms if KR is
* attempted. 82599 uses the same timing for 10g SFI.
*/
-
for (i = 0; i < 5; i++) {
/* Wait for the link partner to also set speed */
msleep(100);
@@ -767,7 +766,6 @@ static s32 ixgbe_setup_mac_link_82599(struct ixgbe_hw *hw,
else
orig_autoc = autoc;
-
if (link_mode == IXGBE_AUTOC_LMS_KX4_KX_KR ||
link_mode == IXGBE_AUTOC_LMS_KX4_KX_KR_1G_AN ||
link_mode == IXGBE_AUTOC_LMS_KX4_KX_KR_SGMII) {
@@ -1926,6 +1924,7 @@ static s32 ixgbe_enable_rx_dma_82599(struct ixgbe_hw *hw, u32 regval)
if (secrxreg & IXGBE_SECRXSTAT_SECRX_RDY)
break;
else
+ /* Use interrupt-safe sleep just in case */
udelay(10);
}
diff --git a/drivers/net/ixgbe/ixgbe_common.c b/drivers/net/ixgbe/ixgbe_common.c
index a12f7c73e27..33f568cff06 100644
--- a/drivers/net/ixgbe/ixgbe_common.c
+++ b/drivers/net/ixgbe/ixgbe_common.c
@@ -1188,7 +1188,7 @@ s32 ixgbe_update_eeprom_checksum_generic(struct ixgbe_hw *hw)
if (status == 0) {
checksum = hw->eeprom.ops.calc_checksum(hw);
status = hw->eeprom.ops.write(hw, IXGBE_EEPROM_CHECKSUM,
- checksum);
+ checksum);
} else {
hw_dbg(hw, "EEPROM read failed\n");
}
@@ -1555,7 +1555,9 @@ s32 ixgbe_fc_enable_generic(struct ixgbe_hw *hw, s32 packetbuf_num)
* 2: Tx flow control is enabled (we can send pause frames but
* we do not support receiving pause frames).
* 3: Both Rx and Tx flow control (symmetric) are enabled.
+#ifdef CONFIG_DCB
* 4: Priority Flow Control is enabled.
+#endif
* other: Invalid.
*/
switch (hw->fc.current_mode) {
@@ -2392,7 +2394,6 @@ s32 ixgbe_init_uta_tables_generic(struct ixgbe_hw *hw)
{
int i;
-
for (i = 0; i < 128; i++)
IXGBE_WRITE_REG(hw, IXGBE_UTA(i), 0);
@@ -2621,7 +2622,7 @@ s32 ixgbe_clear_vfta_generic(struct ixgbe_hw *hw)
* Reads the links register to determine if link is up and the current speed
**/
s32 ixgbe_check_mac_link_generic(struct ixgbe_hw *hw, ixgbe_link_speed *speed,
- bool *link_up, bool link_up_wait_to_complete)
+ bool *link_up, bool link_up_wait_to_complete)
{
u32 links_reg, links_orig;
u32 i;