diff options
author | Ian Abbott <abbotti@mev.co.uk> | 2013-04-12 13:00:49 +0100 |
---|---|---|
committer | Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 2013-04-12 15:12:42 -0700 |
commit | c400c1e1c42d4acff3e1dc0dade184f01b45e8a2 (patch) | |
tree | d82b060a79046cb271a1581c24544534365e9f08 | |
parent | fed9fd2cc6ac2b01f928bef3ce62a9d8058f514d (diff) |
staging: comedi: amplc_dio200_pci: use pci_ioremap_bar()
Use `pci_ioremap_bar()` to ioremap the PCI memory resources. That
function just takes the PCI device and a bar index. It also has some
additional sanity checks to make sure the bar is actually a memory
resource.
Eliminate some local variables from `dio200_pcie_board_setup()` and
`dio200_pci_auto_attach()` that were used to hold the results of
`pci_resource_len()` and `pci_resource_start()` that were only used
once. Also eliminate the check that the bar is a memory resource in
`dio200_pcie_board_setup()` as `pci_ioremap_bar()` will do that for us.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-rw-r--r-- | drivers/staging/comedi/drivers/amplc_dio200_pci.c | 16 |
1 files changed, 5 insertions, 11 deletions
diff --git a/drivers/staging/comedi/drivers/amplc_dio200_pci.c b/drivers/staging/comedi/drivers/amplc_dio200_pci.c index 232620c65ff..4be44e87737 100644 --- a/drivers/staging/comedi/drivers/amplc_dio200_pci.c +++ b/drivers/staging/comedi/drivers/amplc_dio200_pci.c @@ -339,7 +339,6 @@ static int dio200_pcie_board_setup(struct comedi_device *dev) { struct pci_dev *pcidev = comedi_to_pci_dev(dev); void __iomem *brbase; - resource_size_t brlen; /* * The board uses Altera Cyclone IV with PCI-Express hard IP. @@ -351,13 +350,11 @@ static int dio200_pcie_board_setup(struct comedi_device *dev) * Enable" register at offset 0x50 to allow generation of PCIe * interrupts when RXmlrq_i is asserted in the SOPC Builder system. */ - brlen = pci_resource_len(pcidev, 0); - if (brlen < 0x4000 || - !(pci_resource_flags(pcidev, 0) & IORESOURCE_MEM)) { + if (pci_resource_len(pcidev, 0) < 0x4000) { dev_err(dev->class_dev, "error! bad PCI region!\n"); return -EINVAL; } - brbase = ioremap_nocache(pci_resource_start(pcidev, 0), brlen); + brbase = pci_ioremap_bar(pcidev, 0); if (!brbase) { dev_err(dev->class_dev, "error! failed to map registers!\n"); return -ENOMEM; @@ -375,7 +372,6 @@ static int dio200_pci_auto_attach(struct comedi_device *dev, struct pci_dev *pci_dev = comedi_to_pci_dev(dev); const struct dio200_board *thisboard = NULL; struct dio200_private *devpriv; - resource_size_t base, len; unsigned int bar; int ret; @@ -399,14 +395,12 @@ static int dio200_pci_auto_attach(struct comedi_device *dev, return ret; bar = thisboard->mainbar; - base = pci_resource_start(pci_dev, bar); - len = pci_resource_len(pci_dev, bar); - if (len < thisboard->mainsize) { + if (pci_resource_len(pci_dev, bar) < thisboard->mainsize) { dev_err(dev->class_dev, "error! PCI region size too small!\n"); return -EINVAL; } if (pci_resource_flags(pci_dev, bar) & IORESOURCE_MEM) { - devpriv->io.u.membase = ioremap_nocache(base, len); + devpriv->io.u.membase = pci_ioremap_bar(pci_dev, bar); if (!devpriv->io.u.membase) { dev_err(dev->class_dev, "error! cannot remap registers\n"); @@ -414,7 +408,7 @@ static int dio200_pci_auto_attach(struct comedi_device *dev, } devpriv->io.regtype = mmio_regtype; } else { - devpriv->io.u.iobase = (unsigned long)base; + devpriv->io.u.iobase = pci_resource_start(pci_dev, bar); devpriv->io.regtype = io_regtype; } switch (context_model) { |