diff options
| author | David S. Miller <davem@davemloft.net> | 2008-04-02 22:35:23 -0700 |
|---|---|---|
| committer | David S. Miller <davem@davemloft.net> | 2008-04-02 22:35:23 -0700 |
| commit | e1ec1b8ccdf0df6000faa8c2d985ca5f94157e5a (patch) | |
| tree | 4e1ca325dde22f1ac21c9da0be509e87e922e604 | |
| parent | c0f39322c335412339dec16ebfd2a05ceba5ebcf (diff) | |
| parent | 802fb176d8c635ae42da31b80841c26e8c7338a0 (diff) | |
Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6
Conflicts:
drivers/net/s2io.c
55 files changed, 286 insertions, 687 deletions
diff --git a/Documentation/networking/00-INDEX b/Documentation/networking/00-INDEX index 02e56d447a8..c485ee028bd 100644 --- a/Documentation/networking/00-INDEX +++ b/Documentation/networking/00-INDEX @@ -84,9 +84,6 @@ policy-routing.txt - IP policy-based routing ray_cs.txt - Raylink Wireless LAN card driver info. -sk98lin.txt - - Marvell Yukon Chipset / SysKonnect SK-98xx compliant Gigabit - Ethernet Adapter family driver info skfp.txt - SysKonnect FDDI (SK-5xxx, Compaq Netelligent) driver info. smc9.txt diff --git a/Documentation/networking/sk98lin.txt b/Documentation/networking/sk98lin.txt deleted file mode 100644 index 8590a954df1..00000000000 --- a/Documentation/networking/sk98lin.txt +++ /dev/null @@ -1,568 +0,0 @@ -(C)Copyright 1999-2004 Marvell(R). -All rights reserved -=========================================================================== - -sk98lin.txt created 13-Feb-2004 - -Readme File for sk98lin v6.23 -Marvell Yukon/SysKonnect SK-98xx Gigabit Ethernet Adapter family driver for LINUX - -This file contains - 1 Overview - 2 Required Files - 3 Installation - 3.1 Driver Installation - 3.2 Inclusion of adapter at system start - 4 Driver Parameters - 4.1 Per-Port Parameters - 4.2 Adapter Parameters - 5 Large Frame Support - 6 VLAN and Link Aggregation Support (IEEE 802.1, 802.1q, 802.3ad) - 7 Troubleshooting - -=========================================================================== - - -1 Overview -=========== - -The sk98lin driver supports the Marvell Yukon and SysKonnect -SK-98xx/SK-95xx compliant Gigabit Ethernet Adapter on Linux. It has -been tested with Linux on Intel/x86 machines. -*** - - -2 Required Files -================= - -The linux kernel source. -No additional files required. -*** - - -3 Installation -=============== - -It is recommended to download the latest version of the driver from the -SysKonnect web site www.syskonnect.com. If you have downloaded the latest -driver, the Linux kernel has to be patched before the driver can be -installed. For details on how to patch a Linux kernel, refer to the -patch.txt file. - -3.1 Driver Installation ------------------------- - -The following steps describe the actions that are required to install -the driver and to start it manually. These steps should be carried -out for the initial driver setup. Once confirmed to be ok, they can -be included in the system start. - -NOTE 1: To perform the following tasks you need 'root' access. - -NOTE 2: In case of problems, please read the section "Troubleshooting" - below. - -The driver can either be integrated into the kernel or it can be compiled -as a module. Select the appropriate option during the kernel -configuration. - -Compile/use the driver as a module ----------------------------------- -To compile the driver, go to the directory /usr/src/linux and -execute the command "make menuconfig" or "make xconfig" and proceed as -follows: - -To integrate the driver permanently into the kernel, proceed as follows: - -1. Select the menu "Network device support" and then "Ethernet(1000Mbit)" -2. Mark "Marvell Yukon Chipset / SysKonnect SK-98xx family support" - with (*) -3. Build a new kernel when the configuration of the above options is - finished. -4. Install the new kernel. -5. Reboot your system. - -To use the driver as a module, proceed as follows: - -1. Enable 'loadable module support' in the kernel. -2. For automatic driver start, enable the 'Kernel module loader'. -3. Select the menu "Network device support" and then "Ethernet(1000Mbit)" -4. Mark "Marvell Yukon Chipset / SysKonnect SK-98xx family support" - with (M) -5. Execute the command "make modules". -6. Execute the command "make modules_install". - The appropriate modules will be installed. -7. Reboot your system. - - -Load the module manually ------------------------- -To load the module manually, proceed as follows: - -1. Enter "modprobe sk98lin". -2. If a Marvell Yukon or SysKonnect SK-98xx adapter is installed in - your computer and you have a /proc file system, execute the command: - "ls /proc/net/sk98lin/" - This should produce an output containing a line with the following - format: - eth0 eth1 ... - which indicates that your adapter has been found and initialized. - - NOTE 1: If you have more than one Marvell Yukon or SysKonnect SK-98xx - adapter installed, the adapters will be listed as 'eth0', - 'eth1', 'eth2', etc. - For each adapter, repeat steps 3 and 4 below. - - NOTE 2: If you have other Ethernet adapters installed, your Marvell - Yukon or SysKonnect SK-98xx adapter will be mapped to the - next available number, e.g. 'eth1'. The mapping is executed - automatically. - The module installation message (displayed either in a system - log file or on the console) prints a line for each adapter - found containing the corresponding 'ethX'. - -3. Select an IP address and assign it to the respective adapter by - entering: - ifconfig eth0 <ip-address> - With this command, the adapter is connected to the Ethernet. - - SK-98xx Gigabit Ethernet Server Adapters: The yellow LED on the adapter - is now active, the link status LED of the primary port is active and - the link status LED of the secondary port (on dual port adapters) is - blinking (if the ports are connected to a switch or hub). - SK-98xx V2.0 Gigabit Ethernet Adapters: The link status LED is active. - In addition, you will receive a status message on the console stating - "ethX: network connection up using port Y" and showing the selected - connection parameters (x stands for the ethernet device number - (0,1,2, etc), y stands for the port name (A or B)). - - NOTE: If you are in doubt about IP addresses, ask your network - administrator for assistance. - -4. Your adapter should now be fully operational. - Use 'ping <otherstation>' to verify the connection to other computers - on your network. -5. To check the adapter configuration view /proc/net/sk98lin/[devicename]. - For example by executing: - "cat /proc/net/sk98lin/eth0" - -Unload the module ------------------ -To stop and unload the driver modules, proceed as follows: - -1. Execute the command "ifconfig eth0 down". -2. Execute the command "rmmod sk98lin". - -3.2 Inclusion of adapter at system start ------------------------------------------ - -Since a large number of different Linux distributions are -available, we are unable to describe a general installation procedure -for the driver module. -Because the driver is now integrated in the kernel, installation should -be easy, using the standard mechanism of your distribution. -Refer to the distribution's manual for installation of ethernet adapters. - -*** - -4 Driver Parameters -==================== - -Parameters can be set at the command line after the module has been -loaded with the command 'modprobe'. -In some distributions, the configuration tools are able to pass parameters -to the driver module. - -If you use the kernel module loader, you can set driver parameters -in the file /etc/modprobe.conf (or /etc/modules.conf in 2.4 or earlier). -To set the driver parameters in this file, proceed as follows: - -1. Insert a line of the form : - options sk98lin ... - For "...", the same syntax is required as described for the command - line parameters of modprobe below. -2. To activate the new parameters, either reboot your computer - or - unload and reload the driver. - The syntax of the driver parameters is: - - modprobe sk98lin parameter=value1[,value2[,value3...]] - - where value1 refers to the first adapter, value2 to the second etc. - -NOTE: All parameters are case sensitive. Write them exactly as shown - below. - -Example: -Suppose you have two adapters. You want to set auto-negotiation -on the first adapter to ON and on the second adapter to OFF. -You also want to set DuplexCapabilities on the first adapter -to FULL, and on the second adapter to HALF. -Then, you must enter: - - modprobe sk98lin AutoNeg_A=On,Off DupCap_A=Full,Half - -NOTE: The number of adapters that can be configured this way is - limited in the driver (file skge.c, constant SK_MAX_CARD_PARAM). - The current limit is 16. If you happen to install - more adapters, adjust this and recompile. - - -4.1 Per-Port Parameters ------------------------- - -These settings are available for each port on the adapter. -In the following description, '?' stands for the port for -which you set the parameter (A or B). - -Speed ------ -Parameter: Speed_? -Values: 10, 100, 1000, Auto -Default: Auto - -This parameter is used to set the speed capabilities. It is only valid -for the SK-98xx V2.0 copper adapters. -Usually, the speed is negotiated between the two ports during link -establishment. If this fails, a port can be forced to a specific setting -with this parameter. - -Auto-Negotiation ----------------- -Parameter: AutoNeg_? -Values: On, Off, Sense -Default: On - -The "Sense"-mode automatically detects whether the link partner supports -auto-negotiation or not. - -Duplex Capabilities -------------------- -Parameter: DupCap_? -Values: Half, Full, Both -Default: Both - -This parameters is only relevant if auto-negotiation for this port is -not set to "Sense". If auto-negotiation is set to "On", all three values -are possible. If it is set to "Off", only "Full" and "Half" are allowed. -This parameter is useful if your link partner does not support all -possible combinations. - -Flow Control ------------- -Parameter: FlowCtrl_? -Values: Sym, SymOrRem, LocSend, None -Default: SymOrRem - -This parameter can be used to set the flow control capabilities the -port reports during auto-negotiation. It can be set for each port -individually. -Possible modes: - -- Sym = Symmetric: both link partners are allowed to send - PAUSE frames - -- SymOrRem = SymmetricOrRemote: both or only remote partner - are allowed to send PAUSE frames - -- LocSend = LocalSend: only local link partner is allowed - to send PAUSE frames - -- None = no link partner is allowed to send PAUSE frames - -NOTE: This parameter is ignored if auto-negotiation is set to "Off". - -Role in Master-Slave-Negotiation (1000Base-T only) --------------------------------------------------- -Parameter: Role_? -Values: Auto, Master, Slave -Default: Auto - -This parameter is only valid for the SK-9821 and SK-9822 adapters. -For two 1000Base-T ports to communicate, one must take the role of the -master (providing timing information), while the other must be the -slave. Usually, this is negotiated between the two ports during link -establishment. If this fails, a port can be forced to a specific setting -with this parameter. - - -4.2 Adapter Parameters ------------------------ - -Connection Type (SK-98xx V2.0 copper adapters only) ---------------- -Parameter: ConType -Values: Auto, 100FD, 100HD, 10FD, 10HD -Default: Auto - -The parameter 'ConType' is a combination of all five per-port parameters -within one single parameter. This simplifies the configuration of both ports -of an adapter card! The different values of this variable reflect the most -meaningful combinations of port parameters. - -The following table shows the values of 'ConType' and the corresponding -combinations of the per-port parameters: - - ConType | DupCap AutoNeg FlowCtrl Role Speed - ----------+------------------------------------------------------ - Auto | Both On SymOrRem Auto Auto - 100FD | Full Off None Auto (ignored) 100 - 100HD | Half Off None Auto (ignored) 100 - 10FD | Full Off None Auto (ignored) 10 - 10HD | Half Off None Auto (ignored) 10 - -Stating any other port parameter together with this 'ConType' variable -will result in a merged configuration of those settings. This due to -the fact, that the per-port parameters (e.g. Speed_? ) have a higher -priority than the combined variable 'ConType'. - -NOTE: This parameter is always used on both ports of the adapter card. - -Interrupt Moderation --------------------- -Parameter: Moderation -Values: None, Static, Dynamic -Default: None - -Interrupt moderation is employed to limit the maximum number of interrupts -the driver has to serve. That is, one or more interrupts (which indicate any -transmit or receive packet to be processed) are queued until the driver -processes them. When queued interrupts are to be served, is determined by the -'IntsPerSec' parameter, which is explained later below. - -Possible modes: - - -- None - No interrupt moderation is applied on the adapter card. - Therefore, each transmit or receive interrupt is served immediately - as soon as it appears on the interrupt line of the adapter card. - - -- Static - Interrupt moderation is applied on the adapter card. - All transmit and receive interrupts are queued until a complete - moderation interval ends. If such a moderation interval ends, all - queued interrupts are processed in one big bunch without any delay. - The term 'static' reflects the fact, that interrupt moderation is - always enabled, regardless how much network load is currently - passing via a particular interface. In addition, the duration of - the moderation interval has a fixed length that never changes while - the driver is operational. - - -- Dynamic - Interrupt moderation might be applied on the adapter card, - depending on the load of the system. If the driver detects that the - system load is too high, the driver tries to shield the system against - too much network load by enabling interrupt moderation. If - at a later - time - the CPU utilization decreases again (or if the network load is - negligible) the interrupt moderation will automatically be disabled. - -Interrupt moderation should be used when the driver has to handle one or more -interfaces with a high network load, which - as a consequence - leads also to a -high CPU utilization. When moderation is applied in such high network load -situations, CPU load might be reduced by 20-30%. - -NOTE: The drawback of using interrupt moderation is an increase of the round- -trip-time (RTT), due to the queueing and serving of interrupts at dedicated -moderation times. - -Interrupts per second ---------------------- -Parameter: IntsPerSec -Values: 30...40000 (interrupts per second) -Default: 2000 - -This parameter is only used if either static or dynamic interrupt moderation -is used on a network adapter card. Using this parameter if no moderation is -applied will lead to no action performed. - -This parameter determines the length of any interrupt moderation interval. -Assuming that static interrupt moderation is to be used, an 'IntsPerSec' -parameter value of 2000 will lead to an interrupt moderation interval of -500 microseconds. - -NOTE: The duration of the moderation interval is to be chosen with care. -At first glance, selecting a very long duration (e.g. only 100 interrupts per -second) seems to be meaningful, but the increase of packet-processing delay -is tremendous. On the other hand, selecting a very short moderation time might -compensate the use of any moderation being applied. - - -Preferred Port --------------- -Parameter: PrefPort -Values: A, B -Default: A - -This is used to force the preferred port to A or B (on dual-port network -adapters). The preferred port is the one that is used if both are detected -as fully functional. - -RLMT Mode (Redundant Link Management Technology) ------------------------------------------------- -Parameter: RlmtMode -Values: CheckLinkState,CheckLocalPort, CheckSeg, DualNet -Default: CheckLinkState - -RLMT monitors the status of the port. If the link of the active port -fails, RLMT switches immediately to the standby link. The virtual link is -maintained as long as at least one 'physical' link is up. - -Possible modes: - - -- CheckLinkState - Check link state only: RLMT uses the link state - reported by the adapter hardware for each individual port to - determine whether a port can be used for all network traffic or - not. - - -- CheckLocalPort - In this mode, RLMT monitors the network path - between the two ports of an adapter by regularly exchanging packets - between them. This mode requires a network configuration in which - the two ports are able to "see" each other (i.e. there must not be - any router between the ports). - - -- CheckSeg - Check local port and segmentation: This mode supports the - same functions as the CheckLocalPort mode and additionally checks - network segmentation between the ports. Therefore, this mode is only - to be used if Gigabit Ethernet switches are installed on the network - that have been configured to use the Spanning Tree protocol. - - -- DualNet - In this mode, ports A and B are used as separate devices. - If you have a dual port adapter, port A will be configured as eth0 - and port B as eth1. Both ports can be used independently with - distinct IP addresses. The preferred port setting is not used. - RLMT is turned off. - -NOTE: RLMT modes CLP and CLPSS are designed to operate in configurations - where a network path between the ports on one adapter exists. - Moreover, they are not designed to work where adapters are connected - back-to-back. -*** - - -5 Large Frame Support -====================== - -The driver supports large frames (also called jumbo frames). Using large -frames can result in an improved throughput if transferring large amounts -of data. -To enable large frames, set the MTU (maximum transfer unit) of the -interface to the desired value (up to 9000), execute the following -command: - ifconfig eth0 mtu 9000 -This will only work if you have two adapters connected back-to-back -or if you use a switch that supports large frames. When using a switch, -it should be configured to allow large frames and auto-negotiation should -be set to OFF. The setting must be configured on all adapters that can be -reached by the large frames. If one adapter is not set to receive large -frames, it will simply drop them. - -You can switch back to the standard ethernet frame size by executing the -following command: - ifconfig eth0 mtu 1500 - -To permanently configure this setting, add a script with the 'ifconfig' -line to the system startup sequence (named something like "S99sk98lin" -in /etc/rc.d/rc2.d). -*** - - -6 VLAN and Link Aggregation Support (IEEE 802.1, 802.1q, 802.3ad) -================================================================== - -The Marvell Yukon/SysKonnect Linux drivers are able to support VLAN and -Link Aggregation according to IEEE standards 802.1, 802.1q, and 802.3ad. -These features are only available after installation of open source -modules available on the Internet: -For VLAN go to: http://www.candelatech.com/~greear/vlan.html -For Link Aggregation go to: http://www.st.rim.or.jp/~yumo - -NOTE: SysKonnect GmbH does not offer any support for these open source - modules and does not take the responsibility for any kind of - failures or problems arising in connection with these modules. - -NOTE: Configuring Link Aggregation on a SysKonnect dual link adapter may - cause problems when unloading the driver. - - -7 Troubleshooting -================== - -If any problems occur during the installation process, check the -following list: - - -Problem: The SK-98xx adapter cannot be found by the driver. -Solution: In /proc/pci search for the following entry: - 'Ethernet controller: SysKonnect SK-98xx ...' - If this entry exists, the SK-98xx or SK-98xx V2.0 adapter has - been found by the system and should be operational. - If this entry does not exist or if the file '/proc/pci' is not - found, there may be a hardware problem or the PCI support may - not be enabled in your kernel. - The adapter can be checked using the diagnostics program which - is available on the SysKonnect web site: - www.syskonnect.com - - Some COMPAQ machines have problems dealing with PCI under Linux. - This problem is described in the 'PCI howto' document - (included in some distributions or available from the - web, e.g. at 'www.linux.org'). - - -Problem: Programs such as 'ifconfig' or 'route' cannot be found or the - error message 'Operation not permitted' is displayed. -Reason: You are not logged in as user 'root'. -Solution: Logout and login as 'root' or change to 'root' via 'su'. - - -Problem: Upon use of the command 'ping <address>' the message - "ping: sendto: Network is unreachable" is displayed. -Reason: Your route is not set correctly. -Solution: If you are using RedHat, you probably forgot to set up the - route in the 'network configuration'. - Check the existing routes with the 'route' command and check - if an entry for 'eth0' exists, and if so, if it is set correctly. - - -Problem: The driver can be started, the adapter is connected to the - network, but you cannot receive or transmit any packets; - e.g. 'ping' does not work. -Reason: There is an incorrect route in your routing table. -Solution: Check the routing table with the command 'route' and read the - manual help pages dealing with routes (enter 'man route'). - -NOTE: Although the 2.2.x kernel versions generate the routing entry - automatically, problems of this kind may occur here as well. We've - come across a situation in which the driver started correctly at - system start, but after the driver has been removed and reloaded, - the route of the adapter's network pointed to the 'dummy0'device - and had to be corrected manually. - - -Problem: Your computer should act as a router between multiple - IP subnetworks (using multiple adapters), but computers in - other subnetworks cannot be reached. -Reason: Either the router's kernel is not configured for IP forwarding - or the routing table and gateway configuration of at least one - computer is not working. - -Problem: Upon driver start, the following error message is displayed: - "eth0: -- ERROR -- - Class: internal Software error - Nr: 0xcc - Msg: SkGeInitPort() cannot init running ports" -Reason: You are using a driver compiled for single processor machines - on a multiprocessor machine with SMP (Symmetric MultiProcessor) - kernel. -Solution: Configure your kernel appropriately and recompile the kernel or - the modules. - - - -If your problem is not listed here, please contact SysKonnect's technical -support for help (linux@syskonnect.de). -When contacting our technical support, please ensure that the following -information is available: -- System Manufacturer and HW Informations (CPU, Memory... ) -- PCI-Boards in your system -- Distribution -- Kernel version -- Driver version -*** - - - -***End of Readme File*** diff --git a/drivers/atm/firestream.c b/drivers/atm/firestream.c index 47c57a4294b..98099f526d8 100644 --- a/drivers/atm/firestream.c +++ b/drivers/atm/firestream.c @@ -978,6 +978,7 @@ static int fs_open(struct atm_vcc *atm_vcc) /* Docs are vague about this atm_hdr field. By the way, the FS * chip makes odd errors if lower bits are set.... -- REW */ tc->atm_hdr = (vpi << 20) | (vci << 4); + tmc0 = 0; { int pcr = atm_pcr_goal (txtp); diff --git a/drivers/atm/he.c b/drivers/atm/he.c index 2e3395b7e8c..ffc4a5a4194 100644 --- a/drivers/atm/he.c +++ b/drivers/atm/he.c @@ -3000,8 +3000,7 @@ he_proc_read(struct atm_dev *dev, loff_t *pos, char *page) /* eeprom routines -- see 4.7 */ -u8 -read_prom_byte(struct he_dev *he_dev, int addr) +static u8 read_prom_byte(struct he_dev *he_dev, int addr) { u32 val = 0, tmp_read = 0; int i, j = 0; diff --git a/drivers/atm/idt77252.c b/drivers/atm/idt77252.c index b967919fb7e..28d77b5195d 100644 --- a/drivers/atm/idt77252.c +++ b/drivers/atm/idt77252.c @@ -2016,8 +2016,7 @@ idt77252_send_skb(struct atm_vcc *vcc, struct sk_buff *skb, int oam) return 0; } -int -idt77252_send(struct atm_vcc *vcc, struct sk_buff *skb) +static int idt77252_send(struct atm_vcc *vcc, struct sk_buff *skb) { return idt77252_send_skb(vcc, skb, 0); } @@ -3072,8 +3071,7 @@ idt77252_dev_open(struct idt77252_dev *card) return 0; } -void -idt77252_dev_close(struct atm_dev *dev) +static void idt77252_dev_close(struct atm_dev *dev) { struct idt77252_dev *card = dev->dev_data; u32 conf; diff --git a/drivers/atm/iphase.c b/drivers/atm/iphase.c index ef52452640e..670c093ed25 100644 --- a/drivers/atm/iphase.c +++ b/drivers/atm/iphase.c @@ -958,6 +958,7 @@ static void ia_suni_pm7345_init (IADEV *iadev) /***************************** IA_LIB END *****************************/ +#ifdef CONFIG_ATM_IA_DEBUG static int tcnter = 0; static void xdump( u_char* cp, int length, char* prefix ) { @@ -992,6 +993,7 @@ static void xdump( u_char* cp, int length, char* prefix ) } } /* close xdump(... */ +#endif /* CONFIG_ATM_IA_DEBUG */ static struct atm_dev *ia_boards = NULL; diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index 95d1b61342e..da30a31e66f 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -2555,7 +2555,7 @@ config NIU config PASEMI_MAC tristate "PA Semi 1/10Gbit MAC" - depends on PPC64 && PCI + depends on PPC_PASEMI && PCI select PHYLIB select INET_LRO help diff --git a/drivers/net/bfin_mac.c b/drivers/net/bfin_mac.c index c993a32b3f5..26b2dd5016c 100644 --- a/drivers/net/bfin_mac.c +++ b/drivers/net/bfin_mac.c @@ -575,7 +575,6 @@ adjust_head: static int bf537mac_hard_start_xmit(struct sk_buff *skb, struct net_device *dev) { - struct bf537mac_local *lp = netdev_priv(dev); unsigned int data; current_tx_ptr->skb = skb; @@ -634,7 +633,6 @@ out: static void bf537mac_rx(struct net_device *dev) { struct sk_buff *skb, *new_skb; - struct bf537mac_local *lp = netdev_priv(dev); unsigned short len; /* allocate a new skb for next time receive */ diff --git a/drivers/net/bonding/bond_sysfs.c b/drivers/net/bonding/bond_sysfs.c index 90a1f31e8e6..979c2d05ff9 100644 --- a/drivers/net/bonding/bond_sysfs.c +++ b/drivers/net/bonding/bond_sysfs.c @@ -341,6 +341,7 @@ static ssize_t bonding_store_slaves(struct device *d, if (command[0] == '-') { dev = NULL; + original_mtu = 0; bond_for_each_slave(bond, slave, i) if (strnicmp(slave->dev->name, ifname, IFNAMSIZ) == 0) { dev = slave->dev; diff --git a/drivers/net/forcedeth.c b/drivers/net/forcedeth.c index 0272afbdff3..4708a163192 100644 --- a/drivers/net/forcedeth.c +++ b/drivers/net/forcedeth.c @@ -1854,6 +1854,7 @@ static int nv_start_xmit(struct sk_buff *skb, struct net_device *dev) struct ring_desc* start_tx; struct ring_desc* prev_tx; struct nv_skb_map* prev_tx_ctx; + unsigned long flags; /* add fragments to entries count */ for (i = 0; i < fragments; i++) { @@ -1863,10 +1864,10 @@ static int nv_start_xmit(struct sk_buff *skb, struct net_device *dev) empty_slots = nv_get_empty_tx_slots(np); if (unlikely(empty_slots <= entries)) { - spin_lock_irq(&np->lock); + spin_lock_irqsave(&np->lock, flags); netif_stop_queue(dev); np->tx_stop = 1; - spin_unlock_irq(&np->lock); + spin_unlock_irqrestore(&np->lock, flags); return NETDEV_TX_BUSY; } @@ -1929,13 +1930,13 @@ static int nv_start_xmit(struct sk_buff *skb, struct net_device *dev) tx_flags_extra = skb->ip_summed == CHECKSUM_PARTIAL ? NV_TX2_CHECKSUM_L3 | NV_TX2_CHECKSUM_L4 : 0; - spin_lock_irq(&np->lock); + spin_lock_irqsave(&np->lock, flags); /* set tx flags */ start_tx->flaglen |= cpu_to_le32(tx_flags | tx_flags_extra); np->put_tx.orig = put_tx; - spin_unlock_irq(&np->lock); + spin_unlock_irqrestore(&np->lock, flags); dprintk(KERN_DEBUG "%s: nv_start_xmit: entries %d queued for transmission. tx_flags_extra: %x\n", dev->name, entries, tx_flags_extra); @@ -1971,6 +1972,7 @@ static int nv_start_xmit_optimized(struct sk_buff *skb, struct net_device *dev) struct ring_desc_ex* prev_tx; struct nv_skb_map* prev_tx_ctx; struct nv_skb_map* start_tx_ctx; + unsigned long flags; /* add fragments to entries count */ for (i = 0; i < fragments; i++) { @@ -1980,10 +1982,10 @@ static int nv_start_xmit_optimized(struct sk_buff *skb, struct net_device *dev) empty_slots = nv_get_empty_tx_slots(np); if (unlikely(empty_slots <= entries)) { - spin_lock_irq(&np->lock); + spin_lock_irqsave(&np->lock, flags); netif_stop_queue(dev); np->tx_stop = 1; - spin_unlock_irq(&np->lock); + spin_unlock_irqrestore(&np->lock, flags); return NETDEV_TX_BUSY; } @@ -2059,7 +2061,7 @@ static int nv_start_xmit_optimized(struct sk_buff *skb, struct net_device *dev) start_tx->txvlan = 0; } - spin_lock_irq(&np->lock); + spin_lock_irqsave(&np->lock, flags); if (np->tx_limit) { /* Limit the number of outstanding tx. Setup all fragments, but @@ -2085,7 +2087,7 @@ static int nv_start_xmit_optimized(struct sk_buff *skb, struct net_device *dev) start_tx->flaglen |= cpu_to_le32(tx_flags | tx_flags_extra); np->put_tx.ex = put_tx; - spin_unlock_irq(&np->lock); + spin_unlock_irqrestore(&np->lock, flags); dprintk(KERN_DEBUG "%s: nv_start_xmit_optimized: entries %d queued for transmission. tx_flags_extra: %x\n", dev->name, entries, tx_flags_extra); diff --git a/drivers/net/ibm_newemac/core.c b/drivers/net/ibm_newemac/core.c index 0789802d59e..378a2396349 100644 --- a/drivers/net/ibm_newemac/core.c +++ b/drivers/net/ibm_newemac/core.c @@ -1242,8 +1242,8 @@ static int emac_close(struct net_device *ndev) static inline u16 emac_tx_csum(struct emac_instance *dev, struct sk_buff *skb) { - if (emac_has_feature(dev, EMAC_FTR_HAS_TAH && - skb->ip_summed == CHECKSUM_PARTIAL)) { + if (emac_has_feature(dev, EMAC_FTR_HAS_TAH) && + (skb->ip_summed == CHECKSUM_PARTIAL)) { ++dev->stats.tx_packets_csum; return EMAC_TX_CTRL_TAH_CSUM; } diff --git a/drivers/net/s2io.c b/drivers/net/s2io.c index 268a288e045..dcbe01b0ca0 100644 --- a/drivers/net/s2io.c +++ b/drivers/net/s2io.c @@ -86,7 +86,7 @@ #include "s2io.h" #include "s2io-regs.h" -#define DRV_VERSION "2.0.26.19" +#define DRV_VERSION "2.0.26.20" /* S2io Driver name & version. */ static char s2io_driver_name[] = "Neterion"; diff --git a/drivers/net/tulip/eeprom.c b/drivers/net/tulip/eeprom.c index 206918bad53..da2206f6021 100644 --- a/drivers/net/tulip/eeprom.c +++ b/drivers/net/tulip/eeprom.c @@ -343,6 +343,12 @@ int __devinit tulip_read_eeprom(struct net_device *dev, int location, int addr_l void __iomem *ee_addr = tp->base_addr + CSR9; int read_cmd = location | (EE_READ_CMD << addr_len); + /* If location is past the end of what we can address, don't + * read some other location (ie truncate). Just return zero. + */ + if (location > (1 << addr_len) - 1) + return 0; + iowrite32(EE_ENB & ~EE_CS, ee_addr); iowrite32(EE_ENB, ee_addr); diff --git a/drivers/net/tulip/tulip_core.c b/drivers/net/tulip/tulip_core.c index ed600bf56e7..82f404b76d8 100644 --- a/drivers/net/tulip/tulip_core.c +++ b/drivers/net/tulip/tulip_core.c @@ -1437,6 +1437,7 @@ static int __devinit tulip_init_one (struct pci_dev *pdev, EEPROM. */ ee_data = tp->eeprom; + memset(ee_data, 0, sizeof(tp->eeprom)); sum = 0; if (chip_idx == LC82C168) { for (i = 0; i < 3; i++) { @@ -1458,8 +1459,12 @@ static int __devinit tulip_init_one (struct pci_dev *pdev, /* A serial EEPROM interface, we read now and sort it out later. */ int sa_offset = 0; int ee_addr_size = tulip_read_eeprom(dev, 0xff, 8) & 0x40000 ? 8 : 6; + int ee_max_addr = ((1 << ee_addr_size) - 1) * sizeof(u16); - for (i = 0; i < sizeof(tp->eeprom); i+=2) { + if (ee_max_addr > sizeof(tp->eeprom)) + ee_max_addr = sizeof(tp->eeprom); + + for (i = 0; i < ee_max_addr ; i += sizeof(u16)) { u16 data = tulip_read_eeprom(dev, i/2, ee_addr_size); ee_data[i] = data & 0xff; ee_data[i + 1] = data >> 8; diff --git a/drivers/net/usb/Kconfig b/drivers/net/usb/Kconfig index a12c9c41b21..0604f3faf04 100644 --- a/drivers/net/usb/Kconfig +++ b/drivers/net/usb/Kconfig @@ -129,7 +129,7 @@ config USB_USBNET config USB_NET_AX8817X tristate "ASIX AX88xxx Based USB 2.0 Ethernet Adapters" - depends on USB_USBNET && NET_ETHERNET + depends on USB_USBNET select CRC32 default y help diff --git a/drivers/net/usb/dm9601.c b/drivers/net/usb/dm9601.c index 2968bb342ea..f7319d32691 100644 --- a/drivers/net/usb/dm9601.c +++ b/drivers/net/usb/dm9601.c @@ -354,7 +354,7 @@ static void dm9601_set_multicast(struct net_device *net) struct dev_mc_list *mc_list = net->mc_list; int i; - for (i = 0; i < net->mc_count; i++) { + for (i = 0; i < net->mc_count; i++, mc_list = mc_list->next) { u32 crc = ether_crc(ETH_ALEN, mc_list->dmi_addr) >> 26; hashes[crc >> 3] |= 1 << (crc & 0x7); } diff --git a/drivers/net/usb/pegasus.c b/drivers/net/usb/pegasus.c index d1ed68a11e7..b588c890ea7 100644 --- a/drivers/net/usb/pegasus.c +++ b/drivers/net/usb/pegasus.c @@ -1128,12 +1128,8 @@ pegasus_get_settings(struct net_device *dev, struct ethtool_cmd *ecmd) { pegasus_t *pegasus; - if (in_atomic()) - return 0; - pegasus = netdev_priv(dev); mii_ethtool_gset(&pegasus->mii, ecmd); - return 0; } diff --git a/drivers/net/wan/lapbether.c b/drivers/net/wan/lapbether.c index 629c909e05f..b5860b97a93 100644 --- a/drivers/net/wan/lapbether.c +++ b/drivers/net/wan/lapbether.c @@ -58,7 +58,7 @@ struct lapbethdev { struct net_device_stats stats; /* some statistics */ }; -static struct list_head lapbeth_devices = LIST_HEAD_INIT(lapbeth_devices); +static LIST_HEAD(lapbeth_devices); /* ------------------------------------------------------------------------ */ diff --git a/drivers/net/wireless/b43/dma.c b/drivers/net/wireless/b43/dma.c index 8a9776b52da..70db0570adc 100644 --- a/drivers/net/wireless/b43/dma.c +++ b/drivers/net/wireless/b43/dma.c @@ -574,6 +574,7 @@ static int setup_rx_descbuffer(struct b43_dmaring *ring, } if (b43_dma_mapping_error(ring, dmaaddr, ring->rx_buffersize, 0)) { + b43err(ring->dev->wl, "RX DMA buffer allocation failed\n"); dev_kfree_skb_any(skb); return -EIO; } @@ -829,8 +830,12 @@ struct b43_dmaring *b43_setup_dmaring(struct b43_wldev *dev, DMA_TO_DEVICE); if (b43_dma_mapping_error(ring, dma_test, - b43_txhdr_size(dev), 1)) + b43_txhdr_size(dev), 1)) { + + b43err(dev->wl, + "TXHDR DMA allocation failed\n"); goto err_kfree_txhdr_cache; + } } dma_unmap_single(dev->dev->dev, diff --git a/drivers/net/wireless/b43/pcmcia.c b/drivers/net/wireless/b43/pcmcia.c index b79a6bd5396..371e4a11951 100644 --- a/drivers/net/wireless/b43/pcmcia.c +++ b/drivers/net/wireless/b43/pcmcia.c @@ -91,6 +91,8 @@ static int __devinit b43_pcmcia_probe(struct pcmcia_device *dev) dev->conf.ConfigBase = parse.config.base; dev->conf.Present = parse.config.rmask[0]; + dev->conf.Attributes = CONF_ENABLE_IRQ; + dev->conf.IntType = INT_MEMORY_AND_IO; dev->io.BasePort2 = 0; dev->io.NumPorts2 = 0; @@ -112,8 +114,8 @@ static int __devinit b43_pcmcia_probe(struct pcmcia_device *dev) if (res != CS_SUCCESS) goto err_disable; - dev->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING | IRQ_FIRST_SHARED; - dev->irq.IRQInfo1 = IRQ_LEVEL_ID | IRQ_SHARE_ID; + dev->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING; + dev->irq.IRQInfo1 = IRQ_LEVEL_ID; dev->irq.Handler = NULL; /* The handler is registered later. */ dev->irq.Instance = NULL; res = pcmcia_request_irq(dev, &dev->irq); diff --git a/drivers/net/wireless/libertas/if_cs.c b/drivers/net/wireless/libertas/if_cs.c index d1774658216..53afebac714 100644 --- a/drivers/net/wireless/libertas/if_cs.c +++ b/drivers/net/wireless/libertas/if_cs.c @@ -677,9 +677,7 @@ sbi_get_int_status_exit: /* Card has a command result for us */ if (*ireg & IF_CS_C_S_CMD_UPLD_RDY) { - spin_lock(&priv->driver_lock); ret = if_cs_receive_cmdres(priv, priv->upld_buf, &priv->upld_len); - spin_unlock(&priv->driver_lock); if (ret < 0) lbs_pr_err("could not receive cmd from card\n"); } diff --git a/drivers/net/wireless/rt2x00/rt2x00dev.c b/drivers/net/wireless/rt2x00/rt2x00dev.c index 62b58a6261f..50ea7bd0c92 100644 --- a/drivers/net/wireless/rt2x00/rt2x00dev.c +++ b/drivers/net/wireless/rt2x00/rt2x00dev.c @@ -1252,11 +1252,20 @@ int rt2x00lib_suspend(struct rt2x00_dev *rt2x00dev, pm_message_t state) exit: /* - * Set device mode to sleep for power management. + * Set device mode to sleep for power management, + * on some hardware this call seems to consistently fail. + * From the specifications it is hard to tell why it fails, + * and if this is a "bad thing". + * Overall it is safe to just ignore the failure and + * continue suspending. The only downside is that the + * device will not be in optimal power save mode, but with + * the radio and the other components already disabled the + * device is as good as disabled. */ retval = rt2x00dev->ops->lib->set_device_state(rt2x00dev, STATE_SLEEP); if (retval) - return retval; + WARNING(rt2x00dev, "Device failed to enter sleep state, " + "continue suspending.\n"); return 0; } diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h index 993758f924b..c36c76caf20 100644 --- a/include/linux/netdevice.h +++ b/include/linux/netdevice.h @@ -1105,12 +1105,14 @@ static inline int netif_is_multiqueue(const struct net_device *dev) } /* Use this variant when it is known for sure that it - * is executing from interrupt context. + * is executing from hardware interrupt context or with hardware interrupts + * disabled. */ extern void dev_kfree_skb_irq(struct sk_buff *skb); /* Use this variant in places where it could be invoked - * either from interrupt or non-interrupt context. + * from either hardware interrupt or other context, with hardware interrupts + * either disabled or enabled. */ extern void dev_kfree_skb_any(struct sk_buff *skb); diff --git a/include/net/llc.h b/include/net/llc.h index f5024583fc8..7940da1606e 100644 --- a/include/net/llc.h +++ b/include/net/llc.h @@ -65,7 +65,6 @@ struct llc_sap { extern struct list_head llc_sap_list; extern rwlock_t llc_sap_list_lock; -extern unsigned char llc_station_mac_sa[ETH_ALEN]; extern int llc_rcv(struct sk_buff *skb, struct net_device *dev, struct packet_type *pt, struct net_device *orig_dev); diff --git a/include/net/llc_pdu.h b/include/net/llc_pdu.h index 4a8f58b17e4..75b8e2968c9 100644 --- a/include/net/llc_pdu.h +++ b/include/net/llc_pdu.h @@ -381,7 +381,7 @@ static inline void llc_pdu_init_as_xid_cmd(struct sk_buff *skb, xid_info->fmt_id = LLC_XID_FMT_ID; /* 0x81 */ xid_info->type = svcs_supported; xid_info->rw = rx_window << 1; /* size of receive window */ - skb_put(skb, 3); + skb_put(skb, sizeof(struct llc_xid_info)); } /** @@ -406,7 +406,7 @@ static inline void llc_pdu_init_as_xid_rsp(struct sk_buff *skb, xid_info->fmt_id = LLC_XID_FMT_ID; xid_info->type = svcs_supported; xid_info->rw = rx_window << 1; - skb_put(skb, 3); + skb_put(skb, sizeof(struct llc_xid_info)); } /* LLC Type 2 FRMR response information field format */ diff --git a/include/net/llc_sap.h b/include/net/llc_sap.h index 2c56dbece72..ed25bec2f64 100644 --- a/include/net/llc_sap.h +++ b/include/net/llc_sap.h @@ -1,5 +1,8 @@ #ifndef LLC_SAP_H #define LLC_SAP_H + +#include <asm/types.h> + /* * Copyright (c) 1997 by Procom Technology,Inc. * 2001-2003 by Arnaldo Carvalho de Melo <acme@conectiva.com.br> @@ -19,8 +22,8 @@ struct sock; extern void llc_sap_rtn_pdu(struct llc_sap *sap, struct sk_buff *skb); extern void llc_save_primitive(struct sock *sk, struct sk_buff* skb, unsigned char prim); -extern struct sk_buff *llc_alloc_frame(struct sock *sk, - struct net_device *dev); +extern struct sk_buff *llc_alloc_frame(struct sock *sk, struct net_device *dev, + u8 type, u32 data_size); extern void llc_build_and_send_test_pkt(struct llc_sap *sap, struct sk_buff *skb, diff --git a/net/8021q/vlan.c b/net/8021q/vlan.c index 694be86e449..5975ec3be7f 100644 --- a/net/8021q/vlan.c +++ b/net/8021q/vlan.c @@ -384,17 +384,35 @@ static void vlan_sync_address(struct net_device *dev, memcpy(vlan->real_dev_addr, dev->dev_addr, ETH_ALEN); } +static void __vlan_device_event(struct net_device *dev, unsigned long event) +{ + switch (event) { + case NETDEV_CHANGENAME: + vlan_proc_rem_dev(dev); + if (vlan_proc_add_dev(dev) < 0) + pr_warning("8021q: failed to change proc name for %s\n", + dev->name); + break; + } +} + static int vlan_device_event(struct notifier_block *unused, unsigned long event, void *ptr) { struct net_device *dev = ptr; - struct vlan_group *grp = __vlan_find_group(dev->ifindex); + struct vlan_group *grp; int i, flgs; struct net_device *vlandev; if (dev_net(dev) != &init_net) return NOTIFY_DONE; + if (is_vlan_dev(dev)) { + __vlan_device_event(dev, event); + goto out; + } + + grp = __vlan_find_group(dev->ifindex); if (!grp) goto out; diff --git a/net/8021q/vlan.h b/net/8021q/vlan.h index 73efcc715cc..51271aea402 100644 --- a/net/8021q/vlan.h +++ b/net/8021q/vlan.h @@ -45,4 +45,9 @@ void vlan_netlink_fini(void); extern struct rtnl_link_ops vlan_link_ops; +static inline int is_vlan_dev(struct net_device *dev) +{ + return dev->priv_flags & IFF_802_1Q_VLAN; +} + #endif /* !(__BEN_VLAN_802_1Q_INC__) */ diff --git a/net/8021q/vlanproc.c b/net/8021q/vlanproc.c index 3b8657a0b83..24cd96ee810 100644 --- a/net/8021q/vlanproc.c +++ b/net/8021q/vlanproc.c @@ -210,11 +210,6 @@ int vlan_proc_rem_dev(struct net_device *vlandev) * The following few functions build the content of /proc/net/vlan/config */ -static inline int is_vlan_dev(struct net_device *dev) -{ - return dev->priv_flags & IFF_802_1Q_VLAN; -} - /* start read of /proc/net/vlan/config */ static void *vlan_seq_start(struct seq_file *seq, loff_t *pos) __acquires(dev_base_lock) diff --git a/net/bluetooth/af_bluetooth.c b/net/bluetooth/af_bluetooth.c index 1220d8a41eb..d366423c839 100644 --- a/net/bluetooth/af_bluetooth.c +++ b/net/bluetooth/af_bluetooth.c @@ -53,6 +53,30 @@ /* Bluetooth sockets */ #define BT_MAX_PROTO 8 static struct net_proto_family *bt_proto[BT_MAX_PROTO]; + +static struct lock_class_key bt_slock_key[BT_MAX_PROTO]; +static struct lock_class_key bt_lock_key[BT_MAX_PROTO]; +static const char *bt_key_strings[BT_MAX_PROTO] = { + "sk_lock-AF_BLUETOOTH-BTPROTO_L2CAP", + "sk_lock-AF_BLUETOOTH-BTPROTO_HCI", + "sk_lock-AF_BLUETOOTH-BTPROTO_SCO", + "sk_lock-AF_BLUETOOTH-BTPROTO_RFCOMM", + "sk_lock-AF_BLUETOOTH-BTPROTO_BNEP", + "sk_lock-AF_BLUETOOTH-BTPROTO_CMTP", + "sk_lock-AF_BLUETOOTH-BTPROTO_HIDP", + "sk_lock-AF_BLUETOOTH-BTPROTO_AVDTP", +}; + +static const char *bt_slock_key_strings[BT_MAX_PROTO] = { + "slock-AF_BLUETOOTH-BTPROTO_L2CAP", + "slock-AF_BLUETOOTH-BTPROTO_HCI", + "slock-AF_BLUETOOTH-BTPROTO_SCO", + "slock-AF_BLUETOOTH-BTPROTO_RFCOMM", + "slock-AF_BLUETOOTH-BTPROTO_BNEP", + "slock-AF_BLUETOOTH-BTPROTO_CMTP", + "slock-AF_BLUETOOTH-BTPROTO_HIDP", + "slock-AF_BLUETOOTH-BTPROTO_AVDTP", +}; static DEFINE_RWLOCK(bt_proto_lock); int bt_sock_register(int proto, struct net_proto_family *ops) @@ -95,6 +119,21 @@ int bt_sock_unregister(int proto) } EXPORT_SYMBOL(bt_sock_unregister); +static void bt_reclassify_sock_lock(struct socket *sock, int proto) +{ + struct sock *sk = sock->sk; + + if (!sk) + return; + BUG_ON(sock_owned_by_user(sk)); + + sock_lock_init_class_and_name(sk, + bt_slock_key_strings[proto], + &bt_slock_key[proto], + bt_key_strings[proto], + &bt_lock_key[proto]); +} + static int bt_sock_create(struct net *net, struct socket *sock, int proto) { int err; @@ -117,6 +156,7 @@ static int bt_sock_create(struct net *net, struct socket *sock, int proto) if (bt_proto[proto] && try_module_get(bt_proto[proto]->owner)) { err = bt_proto[proto]->create(net, sock, proto); + bt_reclassify_sock_lock(sock, proto); module_put(bt_proto[proto]->owner); } diff --git a/net/bluetooth/hci_sock.c b/net/bluetooth/hci_sock.c index b5d4019d357..1d36c093523 100644 --- a/net/bluetooth/hci_sock.c +++ b/net/bluetooth/hci_sock.c @@ -84,7 +84,7 @@ static struct hci_sec_filter hci_sec_filter = { }; static struct bt_sock_list hci_sk_list = { - .lock = RW_LOCK_UNLOCKED + .lock = __RW_LOCK_UNLOCKED(hci_sk_list.lock) }; /* Send frame to RAW socket */ diff --git a/net/bluetooth/l2cap.c b/net/bluetooth/l2cap.c index 6b995ac832f..a4849f2c1d8 100644 --- a/net/bluetooth/l2cap.c +++ b/net/bluetooth/l2cap.c @@ -62,7 +62,7 @@ static u32 l2cap_feat_mask = 0x0000; static const struct proto_ops l2cap_sock_ops; static struct bt_sock_list l2cap_sk_list = { - .lock = RW_LOCK_UNLOCKED + .lock = __RW_LOCK_UNLOCKED(l2cap_sk_list.lock) }; static void __l2cap_sock_close(struct sock *sk, int reason); diff --git a/net/bluetooth/rfcomm/core.c b/net/bluetooth/rfcomm/core.c index 0c2c93735e9..eb62558e9b0 100644 --- a/net/bluetooth/rfcomm/core.c +++ b/net/bluetooth/rfcomm/core.c @@ -423,8 +423,8 @@ static int __rfcomm_dlc_close(struct rfcomm_dlc *d, int err) rfcomm_dlc_lock(d); d->state = BT_CLOSED; - d->state_change(d, err); rfcomm_dlc_unlock(d); + d->state_change(d, err); skb_queue_purge(&d->tx_queue); rfcomm_dlc_unlink(d); diff --git a/net/bluetooth/rfcomm/sock.c b/net/bluetooth/rfcomm/sock.c index c103fa02893..5083adcbfae 100644 --- a/net/bluetooth/rfcomm/sock.c +++ b/net/bluetooth/rfcomm/sock.c @@ -60,7 +60,7 @@ static const struct proto_ops rfcomm_sock_ops; static struct bt_sock_list rfcomm_sk_list = { - .lock = RW_LOCK_UNLOCKED + .lock = __RW_LOCK_UNLOCKED(rfcomm_sk_list.lock) }; static void rfcomm_sock_close(struct sock *sk); diff --git a/net/bluetooth/rfcomm/tty.c b/net/bluetooth/rfcomm/tty.c index e4c779bb8d7..c3f749abb2d 100644 --- a/net/bluetooth/rfcomm/tty.c +++ b/net/bluetooth/rfcomm/tty.c @@ -570,12 +570,7 @@ static void rfcomm_dev_state_change(struct rfcomm_dlc *dlc, int err) return; rfcomm_dev_del(dev); - /* We have to drop DLC lock here, otherwise - rfcomm_dev_put() will dead lock if it's - the last reference. */ - rfcomm_dlc_unlock(dlc); rfcomm_dev_put(dev); - rfcomm_dlc_lock(dlc); } } else tty_hangup(dev->tty); diff --git a/net/bluetooth/sco.c b/net/bluetooth/sco.c index 2a5953b4405..b0d487e2db2 100644 --- a/net/bluetooth/sco.c +++ b/net/bluetooth/sco.c @@ -58,7 +58,7 @@ static const struct proto_ops sco_sock_ops; static struct bt_sock_list sco_sk_list = { - .lock = RW_LOCK_UNLOCKED + .lock = __RW_LOCK_UNLOCKED(sco_sk_list.lock) }; static void __sco_chan_add(struct sco_conn *conn, struct sock *sk, struct sock *parent); diff --git a/net/ipv4/inet_fragment.c b/net/ipv4/inet_fragment.c index 93170bfcc22..4ed429bd595 100644 --- a/net/ipv4/inet_fragment.c +++ b/net/ipv4/inet_fragment.c @@ -86,7 +86,10 @@ EXPORT_SYMBOL(inet_frags_fini); void inet_frags_exit_net(struct netns_frags *nf, struct inet_frags *f) { nf->low_thresh = 0; + + local_bh_disable(); inet_frag_evictor(nf, f); + local_bh_enable(); } EXPORT_SYMBOL(inet_frags_exit_net); diff --git a/net/ipv4/ip_forward.c b/net/ipv4/ip_forward.c index 9d6d3befd85..4813c39b438 100644 --- a/net/ipv4/ip_forward.c +++ b/net/ipv4/ip_forward.c @@ -85,7 +85,7 @@ int ip_forward(struct sk_buff *skb) if (opt->is_strictroute && rt->rt_dst != rt->rt_gateway) goto sr_failed; - if (unlikely(skb->len > dst_mtu(&rt->u.dst) && + if (unlikely(skb->len > dst_mtu(&rt->u.dst) && !skb_is_gso(skb) && (ip_hdr(skb)->frag_off & htons(IP_DF))) && !skb->local_df) { IP_INC_STATS(IPSTATS_MIB_FRAGFAILS); icmp_send(skb, ICMP_DEST_UNREACH, ICMP_FRAG_NEEDED, diff --git a/net/ipv4/udp.c b/net/ipv4/udp.c index 03bd7069748..7b7fcacec4a 100644 --- a/net/ipv4/udp.c +++ b/net/ipv4/udp.c @@ -1551,14 +1551,14 @@ static void *udp_seq_start(struct seq_file *seq, loff_t *pos) __acquires(udp_hash_lock) { read_lock(&udp_hash_lock); - return *pos ? udp_get_idx(seq, *pos-1) : (void *)1; + return *pos ? udp_get_idx(seq, *pos-1) : SEQ_START_TOKEN; } static void *udp_seq_next(struct seq_file *seq, void *v, loff_t *pos) { struct sock *sk; - if (v == (void *)1) + if (v == SEQ_START_TOKEN) sk = udp_get_idx(seq, 0); else sk = udp_get_next(seq, v); diff --git a/net/ipv6/addrconf.c b/net/ipv6/addrconf.c index 5ab9973571e..87f688857ad 100644 --- a/net/ipv6/addrconf.c +++ b/net/ipv6/addrconf.c @@ -776,6 +776,7 @@ static int ipv6_create_tempaddr(struct inet6_ifaddr *ifp, struct inet6_ifaddr *i struct inet6_dev *idev = ifp->idev; struct in6_addr addr, *tmpaddr; unsigned long tmp_prefered_lft, tmp_valid_lft, tmp_cstamp, tmp_tstamp; + unsigned long regen_advance; int tmp_plen; int ret = 0; int max_addresses; @@ -836,8 +837,23 @@ retry: tmp_tstamp = ifp->tstamp; spin_unlock_bh(&ifp->lock); + regen_advance = idev->cnf.regen_max_retry * + idev->cnf.dad_transmits * + idev->nd_parms->retrans_time / HZ; write_unlock(&idev->lock); + /* A temporary address is created only if this calculated Preferred + * Lifetime is greater than REGEN_ADVANCE time units. In particular, + * an implementation must not create a temporary address with a zero + * Preferred Lifetime. + */ + if (tmp_prefered_lft <= regen_advance) { + in6_ifa_put(ifp); + in6_dev_put(idev); + ret = -1; + goto out; + } + addr_flags = IFA_F_TEMPORARY; /* set in addrconf_prefix_rcv() */ if (ifp->flags & IFA_F_OPTIMISTIC) @@ -1834,6 +1850,9 @@ ok: * lifetimes of an existing temporary address * when processing a Prefix Information Option. */ + if (ifp != ift->ifpub) + continue; + spin_lock(&ift->lock); flags = ift->flags; if (ift->valid_lft > valid_lft && diff --git a/net/ipv6/icmp.c b/net/ipv6/icmp.c index 63309d10df3..227ce3d2339 100644 --- a/net/ipv6/icmp.c +++ b/net/ipv6/icmp.c @@ -440,10 +440,10 @@ void icmpv6_send(struct sk_buff *skb, int type, int code, __u32 info, } if (xfrm_decode_session_reverse(skb, &fl2, AF_INET6)) - goto out; + goto out_dst_release; if (ip6_dst_lookup(sk, &dst2, &fl)) - goto out; + goto out_dst_release; err = xfrm_lookup(&dst2, &fl, sk, XFRM_LOOKUP_ICMP); if (err == -ENOENT) { diff --git a/net/ipv6/ip6_input.c b/net/ipv6/ip6_input.c index 7e36269826b..43a617e2268 100644 --- a/net/ipv6/ip6_input.c +++ b/net/ipv6/ip6_input.c @@ -234,8 +234,7 @@ int ip6_mc_input(struct sk_buff *skb) IP6_INC_STATS_BH(ip6_dst_idev(skb->dst), IPSTATS_MIB_INMCASTPKTS); hdr = ipv6_hdr(skb); - deliver = unlikely(skb->dev->flags & (IFF_PROMISC|IFF_ALLMULTI)) || - ipv6_chk_mcast_addr(skb->dev, &hdr->daddr, NULL); + deliver = ipv6_chk_mcast_addr(skb->dev, &hdr->daddr, NULL); /* * IPv6 multicast router mode isnt currently supported. diff --git a/net/ipv6/netfilter/nf_conntrack_reasm.c b/net/ipv6/netfilter/nf_conntrack_reasm.c index ad8066200f9..9e5f305b202 100644 --- a/net/ipv6/netfilter/nf_conntrack_reasm.c +++ b/net/ipv6/netfilter/nf_conntrack_reasm.c @@ -171,7 +171,9 @@ static __inline__ void fq_kill(struct nf_ct_frag6_queue *fq) static void nf_ct_frag6_evictor(void) { + local_bh_disable(); inet_frag_evictor(&nf_init_frags, &nf_frags); + local_bh_enable(); } static void nf_ct_frag6_expire(unsigned long data) diff --git a/net/llc/af_llc.c b/net/llc/af_llc.c index f93b5761858..97101dcde4c 100644 --- a/net/llc/af_llc.c +++ b/net/llc/af_llc.c @@ -155,6 +155,9 @@ static int llc_ui_create(struct net *net, struct socket *sock, int protocol) struct sock *sk; int rc = -ESOCKTNOSUPPORT; + if (!capable(CAP_NET_RAW)) + return -EPERM; + if (net != &init_net) return -EAFNOSUPPORT; diff --git a/net/llc/llc_c_ac.c b/net/llc/llc_c_ac.c index f728ffe288a..019c780512e 100644 --- a/net/llc/llc_c_ac.c +++ b/net/llc/llc_c_ac.c @@ -198,7 +198,7 @@ int llc_conn_ac_send_disc_cmd_p_set_x(struct sock *sk, struct sk_buff *skb) { int rc = -ENOBUFS; struct llc_sock *llc = llc_sk(sk); - struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev); + struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev, LLC_PDU_TYPE_U, 0); if (nskb) { struct llc_sap *sap = llc->sap; @@ -223,7 +223,7 @@ int llc_conn_ac_send_dm_rsp_f_set_p(struct sock *sk, struct sk_buff *skb) { int rc = -ENOBUFS; struct llc_sock *llc = llc_sk(sk); - struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev); + struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev, LLC_PDU_TYPE_U, 0); if (nskb) { struct llc_sap *sap = llc->sap; @@ -249,7 +249,7 @@ int llc_conn_ac_send_dm_rsp_f_set_1(struct sock *sk, struct sk_buff *skb) { int rc = -ENOBUFS; struct llc_sock *llc = llc_sk(sk); - struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev); + struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev, LLC_PDU_TYPE_U, 0); if (nskb) { struct llc_sap *sap = llc->sap; @@ -282,7 +282,8 @@ int llc_conn_ac_send_frmr_rsp_f_set_x(struct sock *sk, struct sk_buff *skb) llc_pdu_decode_pf_bit(skb, &f_bit); else f_bit = 0; - nskb = llc_alloc_frame(sk, llc->dev); + nskb = llc_alloc_frame(sk, llc->dev, LLC_PDU_TYPE_U, + sizeof(struct llc_frmr_info)); if (nskb) { struct llc_sap *sap = llc->sap; @@ -306,7 +307,8 @@ int llc_conn_ac_resend_frmr_rsp_f_set_0(struct sock *sk, struct sk_buff *skb) { int rc = -ENOBUFS; struct llc_sock *llc = llc_sk(sk); - struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev); + struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev, LLC_PDU_TYPE_U, + sizeof(struct llc_frmr_info)); if (nskb) { struct llc_sap *sap = llc->sap; @@ -336,7 +338,8 @@ int llc_conn_ac_resend_frmr_rsp_f_set_p(struct sock *sk, struct sk_buff *skb) struct llc_sock *llc = llc_sk(sk); llc_pdu_decode_pf_bit(skb, &f_bit); - nskb = llc_alloc_frame(sk, llc->dev); + nskb = llc_alloc_frame(sk, llc->dev, LLC_PDU_TYPE_U, + sizeof(struct llc_frmr_info)); if (nskb) { struct llc_sap *sap = llc->sap; struct llc_pdu_sn *pdu = llc_pdu_sn_hdr(skb); @@ -424,7 +427,7 @@ int llc_conn_ac_resend_i_xxx_x_set_0_or_send_rr(struct sock *sk, struct llc_pdu_sn *pdu = llc_pdu_sn_hdr(skb); int rc = -ENOBUFS; struct llc_sock *llc = llc_sk(sk); - struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev); + struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev, LLC_PDU_TYPE_U, 0); if (nskb) { struct llc_sap *sap = llc->sap; @@ -459,7 +462,7 @@ int llc_conn_ac_send_rej_cmd_p_set_1(struct sock *sk, struct sk_buff *skb) { int rc = -ENOBUFS; struct llc_sock *llc = llc_sk(sk); - struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev); + struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev, LLC_PDU_TYPE_S, 0); if (nskb) { struct llc_sap *sap = llc->sap; @@ -483,7 +486,7 @@ int llc_conn_ac_send_rej_rsp_f_set_1(struct sock *sk, struct sk_buff *skb) { int rc = -ENOBUFS; struct llc_sock *llc = llc_sk(sk); - struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev); + struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev, LLC_PDU_TYPE_S, 0); if (nskb) { struct llc_sap *sap = llc->sap; @@ -507,7 +510,7 @@ int llc_conn_ac_send_rej_xxx_x_set_0(struct sock *sk, struct sk_buff *skb) { int rc = -ENOBUFS; struct llc_sock *llc = llc_sk(sk); - struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev); + struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev, LLC_PDU_TYPE_S, 0); if (nskb) { struct llc_sap *sap = llc->sap; @@ -531,7 +534,7 @@ int llc_conn_ac_send_rnr_cmd_p_set_1(struct sock *sk, struct sk_buff *skb) { int rc = -ENOBUFS; struct llc_sock *llc = llc_sk(sk); - struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev); + struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev, LLC_PDU_TYPE_S, 0); if (nskb) { struct llc_sap *sap = llc->sap; @@ -555,7 +558,7 @@ int llc_conn_ac_send_rnr_rsp_f_set_1(struct sock *sk, struct sk_buff *skb) { int rc = -ENOBUFS; struct llc_sock *llc = llc_sk(sk); - struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev); + struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev, LLC_PDU_TYPE_S, 0); if (nskb) { struct llc_sap *sap = llc->sap; @@ -579,7 +582,7 @@ int llc_conn_ac_send_rnr_xxx_x_set_0(struct sock *sk, struct sk_buff *skb) { int rc = -ENOBUFS; struct llc_sock *llc = llc_sk(sk); - struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev); + struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev, LLC_PDU_TYPE_S, 0); if (nskb) { struct llc_sap *sap = llc->sap; @@ -615,7 +618,7 @@ int llc_conn_ac_opt_send_rnr_xxx_x_set_0(struct sock *sk, struct sk_buff *skb) { int rc = -ENOBUFS; struct llc_sock *llc = llc_sk(sk); - struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev); + struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev, LLC_PDU_TYPE_S, 0); if (nskb) { struct llc_sap *sap = llc->sap; @@ -639,7 +642,7 @@ int llc_conn_ac_send_rr_cmd_p_set_1(struct sock *sk, struct sk_buff *skb) { int rc = -ENOBUFS; struct llc_sock *llc = llc_sk(sk); - struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev); + struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev, LLC_PDU_TYPE_S, 0); if (nskb) { struct llc_sap *sap = llc->sap; @@ -663,7 +666,7 @@ int llc_conn_ac_send_rr_rsp_f_set_1(struct sock *sk, struct sk_buff *skb) { int rc = -ENOBUFS; struct llc_sock *llc = llc_sk(sk); - struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev); + struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev, LLC_PDU_TYPE_S, 0); if (nskb) { struct llc_sap *sap = llc->sap; @@ -688,7 +691,7 @@ int llc_conn_ac_send_ack_rsp_f_set_1(struct sock *sk, struct sk_buff *skb) { int rc = -ENOBUFS; struct llc_sock *llc = llc_sk(sk); - struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev); + struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev, LLC_PDU_TYPE_S, 0); if (nskb) { struct llc_sap *sap = llc->sap; @@ -712,7 +715,7 @@ int llc_conn_ac_send_rr_xxx_x_set_0(struct sock *sk, struct sk_buff *skb) { int rc = -ENOBUFS; struct llc_sock *llc = llc_sk(sk); - struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev); + struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev, LLC_PDU_TYPE_S, 0); if (nskb) { struct llc_sap *sap = llc->sap; @@ -736,7 +739,7 @@ int llc_conn_ac_send_ack_xxx_x_set_0(struct sock *sk, struct sk_buff *skb) { int rc = -ENOBUFS; struct llc_sock *llc = llc_sk(sk); - struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev); + struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev, LLC_PDU_TYPE_S, 0); if (nskb) { struct llc_sap *sap = llc->sap; @@ -770,7 +773,7 @@ int llc_conn_ac_send_sabme_cmd_p_set_x(struct sock *sk, struct sk_buff *skb) { int rc = -ENOBUFS; struct llc_sock *llc = llc_sk(sk); - struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev); + struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev, LLC_PDU_TYPE_U, 0); if (nskb) { struct llc_sap *sap = llc->sap; @@ -799,7 +802,7 @@ int llc_conn_ac_send_ua_rsp_f_set_p(struct sock *sk, struct sk_buff *skb) u8 f_bit; int rc = -ENOBUFS; struct llc_sock *llc = llc_sk(sk); - struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev); + struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev, LLC_PDU_TYPE_U, 0); llc_pdu_decode_pf_bit(skb, &f_bit); if (nskb) { @@ -956,7 +959,7 @@ static int llc_conn_ac_send_rr_rsp_f_set_ackpf(struct sock *sk, { int rc = -ENOBUFS; struct llc_sock *llc = llc_sk(sk); - struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev); + struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev, LLC_PDU_TYPE_S, 0); if (nskb) { struct llc_sap *sap = llc->sap; diff --git a/net/llc/llc_core.c b/net/llc/llc_core.c index 248b5903bb1..50d5b10e23a 100644 --- a/net/llc/llc_core.c +++ b/net/llc/llc_core.c @@ -25,8 +25,6 @@ LIST_HEAD(llc_sap_list); DEFINE_RWLOCK(llc_sap_list_lock); -unsigned char llc_station_mac_sa[ETH_ALEN]; - /** * llc_sap_alloc - allocates and initializes sap. * @@ -37,8 +35,8 @@ static struct llc_sap *llc_sap_alloc(void) struct llc_sap *sap = kzalloc(sizeof(*sap), GFP_ATOMIC); if (sap) { + /* sap->laddr.mac - leave as a null, it's filled by bind */ sap->state = LLC_SAP_STATE_ACTIVE; - memcpy(sap->laddr.mac, llc_station_mac_sa, ETH_ALEN); rwlock_init(&sap->sk_list.lock); atomic_set(&sap->refcnt, 1); } @@ -167,10 +165,6 @@ static int __init llc_init(void) if (dev != NULL) dev = next_net_device(dev); - if (dev != NULL) - memcpy(llc_station_mac_sa, dev->dev_addr, ETH_ALEN); - else - memset(llc_station_mac_sa, 0, ETH_ALEN); dev_add_pack(&llc_packet_type); dev_add_pack(&llc_tr_packet_type); return 0; @@ -185,7 +179,6 @@ static void __exit llc_exit(void) module_init(llc_init); module_exit(llc_exit); -EXPORT_SYMBOL(llc_station_mac_sa); EXPORT_SYMBOL(llc_sap_list); EXPORT_SYMBOL(llc_sap_list_lock); EXPORT_SYMBOL(llc_sap_find); diff --git a/net/llc/llc_input.c b/net/llc/llc_input.c index a69c5c427fe..1c45f172991 100644 --- a/net/llc/llc_input.c +++ b/net/llc/llc_input.c @@ -117,8 +117,12 @@ static inline int llc_fixup_skb(struct sk_buff *skb) skb_pull(skb, llc_len); if (skb->protocol == htons(ETH_P_802_2)) { __be16 pdulen = eth_hdr(skb)->h_proto; - u16 data_size = ntohs(pdulen) - llc_len; + s32 data_size = ntohs(pdulen) - llc_len; + if (data_size < 0 || + ((skb_tail_pointer(skb) - + (u8 *)pdu) - llc_len) < data_size) + return 0; if (unlikely(pskb_trim_rcsum(skb, data_size))) return 0; } diff --git a/net/llc/llc_pdu.c b/net/llc/llc_pdu.c index fa8324396db..2e6cb79196b 100644 --- a/net/llc/llc_pdu.c +++ b/net/llc/llc_pdu.c @@ -241,7 +241,7 @@ void llc_pdu_init_as_frmr_rsp(struct sk_buff *skb, struct llc_pdu_sn *prev_pdu, FRMR_INFO_SET_PDU_INFO_2LONG_IND(frmr_info, vzyxw); FRMR_INFO_SET_PDU_INVALID_Nr_IND(frmr_info, vzyxw); FRMR_INFO_SET_PDU_INVALID_Ns_IND(frmr_info, vzyxw); - skb_put(skb, 5); + skb_put(skb, sizeof(struct llc_frmr_info)); } /** diff --git a/net/llc/llc_s_ac.c b/net/llc/llc_s_ac.c index ac3d93b210d..a94bd56bcac 100644 --- a/net/llc/llc_s_ac.c +++ b/net/llc/llc_s_ac.c @@ -103,7 +103,8 @@ int llc_sap_action_send_xid_r(struct llc_sap *sap, struct sk_buff *skb) llc_pdu_decode_sa(skb, mac_da); llc_pdu_decode_da(skb, mac_sa); llc_pdu_decode_ssap(skb, &dsap); - nskb = llc_alloc_frame(NULL, skb->dev); + nskb = llc_alloc_frame(NULL, skb->dev, LLC_PDU_TYPE_U, + sizeof(struct llc_xid_info)); if (!nskb) goto out; llc_pdu_header_init(nskb, LLC_PDU_TYPE_U, sap->laddr.lsap, dsap, @@ -144,11 +145,15 @@ int llc_sap_action_send_test_r(struct llc_sap *sap, struct sk_buff *skb) u8 mac_da[ETH_ALEN], mac_sa[ETH_ALEN], dsap; struct sk_buff *nskb; int rc = 1; + u32 data_size; llc_pdu_decode_sa(skb, mac_da); llc_pdu_decode_da(skb, mac_sa); llc_pdu_decode_ssap(skb, &dsap); - nskb = llc_alloc_frame(NULL, skb->dev); + + /* The test request command is type U (llc_len = 3) */ + data_size = ntohs(eth_hdr(skb)->h_proto) - 3; + nskb = llc_alloc_frame(NULL, skb->dev, LLC_PDU_TYPE_U, data_size); if (!nskb) goto out; llc_pdu_header_init(nskb, LLC_PDU_TYPE_U, sap->laddr.lsap, dsap, diff --git a/net/llc/llc_sap.c b/net/llc/llc_sap.c index 2525165e2e8..e2ddde75501 100644 --- a/net/llc/llc_sap.c +++ b/net/llc/llc_sap.c @@ -24,20 +24,41 @@ #include <net/tcp_states.h> #include <linux/llc.h> +static int llc_mac_header_len(unsigned short devtype) +{ + switch (devtype) { + case ARPHRD_ETHER: + case ARPHRD_LOOPBACK: + return sizeof(struct ethhdr); +#ifdef CONFIG_TR + case ARPHRD_IEEE802_TR: + return sizeof(struct trh_hdr); +#endif + } + return 0; +} + /** * llc_alloc_frame - allocates sk_buff for frame * @dev: network device this skb will be sent over + * @type: pdu type to allocate + * @data_size: data size to allocate * * Allocates an sk_buff for frame and initializes sk_buff fields. * Returns allocated skb or %NULL when out of memory. */ -struct sk_buff *llc_alloc_frame(struct sock *sk, struct net_device *dev) +struct sk_buff *llc_alloc_frame(struct sock *sk, struct net_device *dev, + u8 type, u32 data_size) { - struct sk_buff *skb = alloc_skb(128, GFP_ATOMIC); + int hlen = type == LLC_PDU_TYPE_U ? 3 : 4; + struct sk_buff *skb; + + hlen += llc_mac_header_len(dev->type); + skb = alloc_skb(hlen + data_size, GFP_ATOMIC); if (skb) { skb_reset_mac_header(skb); - skb_reserve(skb, 50); + skb_reserve(skb, hlen); skb_reset_network_header(skb); skb_reset_transport_header(skb); skb->protocol = htons(ETH_P_802_2); diff --git a/net/llc/llc_station.c b/net/llc/llc_station.c index 6f2ea209032..83da1333949 100644 --- a/net/llc/llc_station.c +++ b/net/llc/llc_station.c @@ -253,13 +253,14 @@ static int llc_station_ac_inc_xid_r_cnt_by_1(struct sk_buff *skb) static int llc_station_ac_send_null_dsap_xid_c(struct sk_buff *skb) { int rc = 1; - struct sk_buff *nskb = llc_alloc_frame(NULL, skb->dev); + struct sk_buff *nskb = llc_alloc_frame(NULL, skb->dev, LLC_PDU_TYPE_U, + sizeof(struct llc_xid_info)); if (!nskb) goto out; llc_pdu_header_init(nskb, LLC_PDU_TYPE_U, 0, 0, LLC_PDU_CMD); llc_pdu_init_as_xid_cmd(nskb, LLC_XID_NULL_CLASS_2, 127); - rc = llc_mac_hdr_init(nskb, llc_station_mac_sa, llc_station_mac_sa); + rc = llc_mac_hdr_init(nskb, skb->dev->dev_addr, skb->dev->dev_addr); if (unlikely(rc)) goto free; llc_station_send_pdu(nskb); @@ -274,7 +275,8 @@ static int llc_station_ac_send_xid_r(struct sk_buff *skb) { u8 mac_da[ETH_ALEN], dsap; int rc = 1; - struct sk_buff* nskb = llc_alloc_frame(NULL, skb->dev); + struct sk_buff *nskb = llc_alloc_frame(NULL, skb->dev, LLC_PDU_TYPE_U, + sizeof(struct llc_xid_info)); if (!nskb) goto out; @@ -283,7 +285,7 @@ static int llc_station_ac_send_xid_r(struct sk_buff *skb) llc_pdu_decode_ssap(skb, &dsap); llc_pdu_header_init(nskb, LLC_PDU_TYPE_U, 0, dsap, LLC_PDU_RSP); llc_pdu_init_as_xid_rsp(nskb, LLC_XID_NULL_CLASS_2, 127); - rc = llc_mac_hdr_init(nskb, llc_station_mac_sa, mac_da); + rc = llc_mac_hdr_init(nskb, skb->dev->dev_addr, mac_da); if (unlikely(rc)) goto free; llc_station_send_pdu(nskb); @@ -298,7 +300,12 @@ static int llc_station_ac_send_test_r(struct sk_buff *skb) { u8 mac_da[ETH_ALEN], dsap; int rc = 1; - struct sk_buff *nskb = llc_alloc_frame(NULL, skb->dev); + u32 data_size; + struct sk_buff *nskb; + + /* The test request command is type U (llc_len = 3) */ + data_size = ntohs(eth_hdr(skb)->h_proto) - 3; + nskb = llc_alloc_frame(NULL, skb->dev, LLC_PDU_TYPE_U, data_size); if (!nskb) goto out; @@ -307,7 +314,7 @@ static int llc_station_ac_send_test_r(struct sk_buff *skb) llc_pdu_decode_ssap(skb, &dsap); llc_pdu_header_init(nskb, LLC_PDU_TYPE_U, 0, dsap, LLC_PDU_RSP); llc_pdu_init_as_test_rsp(nskb, skb); - rc = llc_mac_hdr_init(nskb, llc_station_mac_sa, mac_da); + rc = llc_mac_hdr_init(nskb, skb->dev->dev_addr, mac_da); if (unlikely(rc)) goto free; llc_station_send_pdu(nskb); diff --git a/net/mac80211/ieee80211.c b/net/mac80211/ieee80211.c index 5ee431b6256..aaa5480e204 100644 --- a/net/mac80211/ieee80211.c +++ b/net/mac80211/ieee80211.c @@ -375,6 +375,18 @@ static int ieee80211_open(struct net_device *dev) if (need_hw_reconfig) ieee80211_hw_config(local); + /* + * ieee80211_sta_work is disabled while network interface + * is down. Therefore, some configuration changes may not + * yet be effective. Trigger execution of ieee80211_sta_work + * to fix this. + */ + if(sdata->vif.type == IEEE80211_IF_TYPE_STA || + sdata->vif.type == IEEE80211_IF_TYPE_IBSS) { + struct ieee80211_if_sta *ifsta = &sdata->u.sta; + queue_work(local->hw.workqueue, &ifsta->work); + } + netif_start_queue(dev); return 0; diff --git a/net/mac80211/ieee80211_sta.c b/net/mac80211/ieee80211_sta.c index 110eaf3ab58..c20ef89acad 100644 --- a/net/mac80211/ieee80211_sta.c +++ b/net/mac80211/ieee80211_sta.c @@ -360,7 +360,7 @@ static u32 ieee80211_handle_erp_ie(struct ieee80211_sub_if_data *sdata, struct ieee80211_bss_conf *bss_conf = &sdata->bss_conf; struct ieee80211_if_sta *ifsta = &sdata->u.sta; bool use_protection = (erp_value & WLAN_ERP_USE_PROTECTION) != 0; - bool preamble_mode = (erp_value & WLAN_ERP_BARKER_PREAMBLE) != 0; + bool use_short_preamble = (erp_value & WLAN_ERP_BARKER_PREAMBLE) == 0; DECLARE_MAC_BUF(mac); u32 changed = 0; @@ -376,16 +376,15 @@ static u32 ieee80211_handle_erp_ie(struct ieee80211_sub_if_data *sdata, changed |= BSS_CHANGED_ERP_CTS_PROT; } - if (preamble_mode != bss_conf->use_short_preamble) { + if (use_short_preamble != bss_conf->use_short_preamble) { if (net_ratelimit()) { printk(KERN_DEBUG "%s: switched to %s barker preamble" " (BSSID=%s)\n", sdata->dev->name, - (preamble_mode == WLAN_ERP_PREAMBLE_SHORT) ? - "short" : "long", + use_short_preamble ? "short" : "long", print_mac(mac, ifsta->bssid)); } - bss_conf->use_short_preamble = preamble_mode; + bss_conf->use_short_preamble = use_short_preamble; changed |= BSS_CHANGED_ERP_PREAMBLE; } diff --git a/net/rose/af_rose.c b/net/rose/af_rose.c index 92d85c38e4d..d1ff3f885c5 100644 --- a/net/rose/af_rose.c +++ b/net/rose/af_rose.c @@ -598,17 +598,24 @@ static int rose_release(struct socket *sock) if (sk == NULL) return 0; + sock_hold(sk); + sock_orphan(sk); + lock_sock(sk); rose = rose_sk(sk); switch (rose->state) { case ROSE_STATE_0: + release_sock(sk); rose_disconnect(sk, 0, -1, -1); + lock_sock(sk); rose_destroy_socket(sk); break; case ROSE_STATE_2: rose->neighbour->use--; + release_sock(sk); rose_disconnect(sk, 0, -1, -1); + lock_sock(sk); rose_destroy_socket(sk); break; @@ -633,6 +640,8 @@ static int rose_release(struct socket *sock) } sock->sk = NULL; + release_sock(sk); + sock_put(sk); return 0; } diff --git a/net/sched/sch_generic.c b/net/sched/sch_generic.c index 10b5c0887ff..b741618e4d5 100644 --- a/net/sched/sch_generic.c +++ b/net/sched/sch_generic.c @@ -184,10 +184,22 @@ static inline int qdisc_restart(struct net_device *dev) void __qdisc_run(struct net_device *dev) { - do { - if (!qdisc_restart(dev)) + unsigned long start_time = jiffies; + + while (qdisc_restart(dev)) { + if (netif_queue_stopped(dev)) + break; + + /* + * Postpone processing if + * 1. another process needs the CPU; + * 2. we've been doing it for too long. + */ + if (need_resched() || jiffies != start_time) { + netif_schedule(dev); break; - } while (!netif_queue_stopped(dev)); + } + } clear_bit(__LINK_STATE_QDISC_RUNNING, &dev->state); } |