treewide: typo 'interrrupt' word corrections.

Signed-off-by: Justin P. Mattock <justinmattock@gmail.com>
Signed-off-by: Vitaliy Ivanov <vitalivanov@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

11 files changed, 18 insertions, 18 deletions

diff --git a/arch/arm/mach-omap2/smartreflex.c b/arch/arm/mach-omap2/smartreflex.c
index 2ce2fb7664b..f56b1bd41f2 100644
--- a/arch/arm/mach-omap2/smartreflex.c
+++ b/arch/arm/mach-omap2/smartreflex.c
@@ -247,7 +247,7 @@ static void sr_stop_vddautocomp(struct omap_sr *sr)
  * driver register and sr device intializtion API's. Only one call
  * will ultimately succeed.
  *
- * Currently this function registers interrrupt handler for a particular SR
+ * Currently this function registers interrupt handler for a particular SR
  * if smartreflex class driver is already registered and has
  * requested for interrupts and the SR interrupt line in present.
  */
diff --git a/arch/powerpc/platforms/embedded6xx/storcenter.c b/arch/powerpc/platforms/embedded6xx/storcenter.c
index 613070e9ddb..f1eebcae9bf 100644
--- a/arch/powerpc/platforms/embedded6xx/storcenter.c
+++ b/arch/powerpc/platforms/embedded6xx/storcenter.c
@@ -77,7 +77,7 @@ static void __init storcenter_setup_arch(void)
 }
 
 /*
- * Interrupt setup and service.  Interrrupts on the turbostation come
+ * Interrupt setup and service.  Interrupts on the turbostation come
  * from the four PCI slots plus onboard 8241 devices: I2C, DUART.
  */
 static void __init storcenter_init_IRQ(void)
diff --git a/drivers/net/arm/ks8695net.c b/drivers/net/arm/ks8695net.c
index c827a6097d0..8d0baeceaaa 100644
--- a/drivers/net/arm/ks8695net.c
+++ b/drivers/net/arm/ks8695net.c
@@ -414,7 +414,7 @@ ks8695_tx_irq(int irq, void *dev_id)
  *    Interrupt Status Register (Offset 0xF208)
  *        Bit29: WAN MAC Receive Status
  *        Bit16: LAN MAC Receive Status
- *    So, this Rx interrrupt enable/status bit number is equal
+ *    So, this Rx interrupt enable/status bit number is equal
  *    as Rx IRQ number.
  */
 static inline u32 ks8695_get_rx_enable_bit(struct ks8695_priv *ksp)
diff --git a/drivers/net/atlx/atl1.c b/drivers/net/atlx/atl1.c
index 6f0e9403004..c346e65e51e 100644
--- a/drivers/net/atlx/atl1.c
+++ b/drivers/net/atlx/atl1.c
@@ -858,7 +858,7 @@ static s32 atl1_init_hw(struct atl1_hw *hw)
 	atl1_init_flash_opcode(hw);
 
 	if (!hw->phy_configured) {
-		/* enable GPHY LinkChange Interrrupt */
+		/* enable GPHY LinkChange Interrupt */
 		ret_val = atl1_write_phy_reg(hw, 18, 0xC00);
 		if (ret_val)
 			return ret_val;
diff --git a/drivers/net/bnx2.h b/drivers/net/bnx2.h
index fc50d4267df..99d31a7d6aa 100644
--- a/drivers/net/bnx2.h
+++ b/drivers/net/bnx2.h
@@ -5617,7 +5617,7 @@ struct l2_fhdr {
 #define BNX2_TXP_CPU_STATE_FIO_ABORT_HALTED		 (1L<<8)
 #define BNX2_TXP_CPU_STATE_SOFT_HALTED			 (1L<<10)
 #define BNX2_TXP_CPU_STATE_SPAD_UNDERFLOW		 (1L<<11)
-#define BNX2_TXP_CPU_STATE_INTERRRUPT			 (1L<<12)
+#define BNX2_TXP_CPU_STATE_INTERRUPT			 (1L<<12)
 #define BNX2_TXP_CPU_STATE_DATA_ACCESS_STALL		 (1L<<14)
 #define BNX2_TXP_CPU_STATE_INST_FETCH_STALL		 (1L<<15)
 #define BNX2_TXP_CPU_STATE_BLOCKED_READ			 (1L<<31)
@@ -5712,7 +5712,7 @@ struct l2_fhdr {
 #define BNX2_TPAT_CPU_STATE_FIO_ABORT_HALTED		 (1L<<8)
 #define BNX2_TPAT_CPU_STATE_SOFT_HALTED			 (1L<<10)
 #define BNX2_TPAT_CPU_STATE_SPAD_UNDERFLOW		 (1L<<11)
-#define BNX2_TPAT_CPU_STATE_INTERRRUPT			 (1L<<12)
+#define BNX2_TPAT_CPU_STATE_INTERRUPT			 (1L<<12)
 #define BNX2_TPAT_CPU_STATE_DATA_ACCESS_STALL		 (1L<<14)
 #define BNX2_TPAT_CPU_STATE_INST_FETCH_STALL		 (1L<<15)
 #define BNX2_TPAT_CPU_STATE_BLOCKED_READ		 (1L<<31)
@@ -5807,7 +5807,7 @@ struct l2_fhdr {
 #define BNX2_RXP_CPU_STATE_FIO_ABORT_HALTED		 (1L<<8)
 #define BNX2_RXP_CPU_STATE_SOFT_HALTED			 (1L<<10)
 #define BNX2_RXP_CPU_STATE_SPAD_UNDERFLOW		 (1L<<11)
-#define BNX2_RXP_CPU_STATE_INTERRRUPT			 (1L<<12)
+#define BNX2_RXP_CPU_STATE_INTERRUPT			 (1L<<12)
 #define BNX2_RXP_CPU_STATE_DATA_ACCESS_STALL		 (1L<<14)
 #define BNX2_RXP_CPU_STATE_INST_FETCH_STALL		 (1L<<15)
 #define BNX2_RXP_CPU_STATE_BLOCKED_READ			 (1L<<31)
@@ -5953,7 +5953,7 @@ struct l2_fhdr {
 #define BNX2_COM_CPU_STATE_FIO_ABORT_HALTED		 (1L<<8)
 #define BNX2_COM_CPU_STATE_SOFT_HALTED			 (1L<<10)
 #define BNX2_COM_CPU_STATE_SPAD_UNDERFLOW		 (1L<<11)
-#define BNX2_COM_CPU_STATE_INTERRRUPT			 (1L<<12)
+#define BNX2_COM_CPU_STATE_INTERRUPT			 (1L<<12)
 #define BNX2_COM_CPU_STATE_DATA_ACCESS_STALL		 (1L<<14)
 #define BNX2_COM_CPU_STATE_INST_FETCH_STALL		 (1L<<15)
 #define BNX2_COM_CPU_STATE_BLOCKED_READ			 (1L<<31)
@@ -6119,7 +6119,7 @@ struct l2_fhdr {
 #define BNX2_CP_CPU_STATE_FIO_ABORT_HALTED		 (1L<<8)
 #define BNX2_CP_CPU_STATE_SOFT_HALTED			 (1L<<10)
 #define BNX2_CP_CPU_STATE_SPAD_UNDERFLOW		 (1L<<11)
-#define BNX2_CP_CPU_STATE_INTERRRUPT			 (1L<<12)
+#define BNX2_CP_CPU_STATE_INTERRUPT			 (1L<<12)
 #define BNX2_CP_CPU_STATE_DATA_ACCESS_STALL		 (1L<<14)
 #define BNX2_CP_CPU_STATE_INST_FETCH_STALL		 (1L<<15)
 #define BNX2_CP_CPU_STATE_BLOCKED_READ			 (1L<<31)
@@ -6291,7 +6291,7 @@ struct l2_fhdr {
 #define BNX2_MCP_CPU_STATE_FIO_ABORT_HALTED		 (1L<<8)
 #define BNX2_MCP_CPU_STATE_SOFT_HALTED			 (1L<<10)
 #define BNX2_MCP_CPU_STATE_SPAD_UNDERFLOW		 (1L<<11)
-#define BNX2_MCP_CPU_STATE_INTERRRUPT			 (1L<<12)
+#define BNX2_MCP_CPU_STATE_INTERRUPT			 (1L<<12)
 #define BNX2_MCP_CPU_STATE_DATA_ACCESS_STALL		 (1L<<14)
 #define BNX2_MCP_CPU_STATE_INST_FETCH_STALL		 (1L<<15)
 #define BNX2_MCP_CPU_STATE_BLOCKED_READ			 (1L<<31)
diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c
index 57339da7632..d7f879dfb1c 100644
--- a/drivers/net/sky2.c
+++ b/drivers/net/sky2.c
@@ -2057,7 +2057,7 @@ static void sky2_hw_down(struct sky2_port *sky2)
 
 	sky2_write8(hw, SK_REG(port, RX_GMF_CTRL_T), GMF_RST_SET);
 
-	/* Force any delayed status interrrupt and NAPI */
+	/* Force any delayed status interrupt and NAPI */
 	sky2_write32(hw, STAT_LEV_TIMER_CNT, 0);
 	sky2_write32(hw, STAT_TX_TIMER_CNT, 0);
 	sky2_write32(hw, STAT_ISR_TIMER_CNT, 0);
diff --git a/drivers/net/wireless/rtlwifi/pci.c b/drivers/net/wireless/rtlwifi/pci.c
index 5efd5783348..c1ea65e5d03 100644
--- a/drivers/net/wireless/rtlwifi/pci.c
+++ b/drivers/net/wireless/rtlwifi/pci.c
@@ -488,7 +488,7 @@ static void _rtl_pci_tx_chk_waitq(struct ieee80211_hw *hw)
 	struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
 	struct sk_buff *skb = NULL;
 	struct ieee80211_tx_info *info = NULL;
-	int tid; /* should be int */
+	int tid;
 
 	if (!rtlpriv->rtlhal.earlymode_enable)
 		return;
@@ -1538,7 +1538,7 @@ static int rtl_pci_start(struct ieee80211_hw *hw)
 
 	rtl_init_rx_config(hw);
 
-	/*should after adapter start and interrupt enable. */
+	/*should be after adapter start and interrupt enable. */
 	set_hal_start(rtlhal);
 
 	RT_CLEAR_PS_LEVEL(ppsc, RT_RF_OFF_LEVL_HALT_NIC);
@@ -1559,7 +1559,7 @@ static void rtl_pci_stop(struct ieee80211_hw *hw)
 	u8 RFInProgressTimeOut = 0;
 
 	/*
-	 *should before disable interrrupt&adapter
+	 *should be before disable interrupt&adapter
 	 *and will do it immediately.
 	 */
 	set_hal_stop(rtlhal);
diff --git a/drivers/tty/serial/mrst_max3110.c b/drivers/tty/serial/mrst_max3110.c
index a764bf99743..fbd9261a0c2 100644
--- a/drivers/tty/serial/mrst_max3110.c
+++ b/drivers/tty/serial/mrst_max3110.c
@@ -23,7 +23,7 @@
  *    1 word. If SPI master controller doesn't support sclk frequency change,
  *    then the char need be sent out one by one with some delay
  *
- * 2. Currently only RX available interrrupt is used, no need for waiting TXE
+ * 2. Currently only RX available interrupt is used, no need for waiting TXE
  *    interrupt for a low speed UART device
  */
 
diff --git a/drivers/usb/gadget/langwell_udc.c b/drivers/usb/gadget/langwell_udc.c
index a06e2c27b43..ff4d40d77c3 100644
--- a/drivers/usb/gadget/langwell_udc.c
+++ b/drivers/usb/gadget/langwell_udc.c
@@ -2969,7 +2969,7 @@ static irqreturn_t langwell_irq(int irq, void *_dev)
 		handle_port_change(dev);
 	}
 
-	/* suspend interrrupt */
+	/* suspend interrupt */
 	if (irq_sts & STS_SLI) {
 		dev_vdbg(&dev->pdev->dev, "suspend interrupt\n");
 		handle_bus_suspend(dev);
diff --git a/drivers/usb/gadget/net2280.c b/drivers/usb/gadget/net2280.c
index 3dd40b4e675..a218a4de5dc 100644
--- a/drivers/usb/gadget/net2280.c
+++ b/drivers/usb/gadget/net2280.c
@@ -2481,7 +2481,7 @@ static void handle_stat1_irqs (struct net2280 *dev, u32 stat)
 	mask = (1 << HIGH_SPEED) | (1 << FULL_SPEED);
 
 	/* VBUS disconnect is indicated by VBUS_PIN and VBUS_INTERRUPT set.
-	 * Root Port Reset is indicated by ROOT_PORT_RESET_INTERRRUPT set and
+	 * Root Port Reset is indicated by ROOT_PORT_RESET_INTERRUPT set and
 	 * both HIGH_SPEED and FULL_SPEED clear (as ROOT_PORT_RESET_INTERRUPT
 	 * only indicates a change in the reset state).
 	 */
diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c
index b67a062f556..95a67fea393 100644
--- a/drivers/usb/musb/musb_gadget.c
+++ b/drivers/usb/musb/musb_gadget.c
@@ -704,7 +704,7 @@ static void rxstate(struct musb *musb, struct musb_request *req)
 	 * most these gadgets, end of is signified either by a short packet,
 	 * or filling the last byte of the buffer.  (Sending extra data in
 	 * that last pckate should trigger an overflow fault.)  But in mode 1,
-	 * we don't get DMA completion interrrupt for short packets.
+	 * we don't get DMA completion interrupt for short packets.
 	 *
 	 * Theoretically, we could enable DMAReq irq (MUSB_RXCSR_DMAMODE = 1),
 	 * to get endpoint interrupt on every DMA req, but that didn't seem