[media] dvb_usb_v2: remote controller

* remove old legacy code totally
* move default RC keymap definition the the (struct dvb_usb_driver_info)

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

3 files changed, 22 insertions, 317 deletions

diff --git a/drivers/media/dvb/dvb-usb/dvb_usb.h b/drivers/media/dvb/dvb-usb/dvb_usb.h
index 8ddae58e8e7..974337ddc5c 100644
--- a/drivers/media/dvb/dvb-usb/dvb_usb.h
+++ b/drivers/media/dvb/dvb-usb/dvb_usb.h
@@ -62,24 +62,10 @@
 
 struct dvb_usb_driver_info {
 	const char *name;
+	const char *rc_map;
 	const struct dvb_usb_device_properties *props;
 };
 
-static inline u8 rc5_custom(struct rc_map_table *key)
-{
-	return (key->scancode >> 8) & 0xff;
-}
-
-static inline u8 rc5_data(struct rc_map_table *key)
-{
-	return key->scancode & 0xff;
-}
-
-static inline u16 rc5_scan(struct rc_map_table *key)
-{
-	return key->scancode & 0xffff;
-}
-
 struct dvb_usb_device;
 struct dvb_usb_adapter;
 struct usb_data_stream;
@@ -161,25 +147,6 @@ struct dvb_usb_adapter_properties {
 };
 
 /**
- * struct dvb_rc_legacy - old properties of remote controller
- * @rc_map_table: a hard-wired array of struct rc_map_table (NULL to disable
- *  remote control handling).
- * @rc_map_size: number of items in @rc_map_table.
- * @rc_query: called to query an event event.
- * @rc_interval: time in ms between two queries.
- */
-struct dvb_rc_legacy {
-/* remote control properties */
-#define REMOTE_NO_KEY_PRESSED      0x00
-#define REMOTE_KEY_PRESSED         0x01
-#define REMOTE_KEY_REPEAT          0x02
-	struct rc_map_table  *rc_map_table;
-	int rc_map_size;
-	int (*rc_query) (struct dvb_usb_device *, u32 *, int *);
-	int rc_interval;
-};
-
-/**
  * struct dvb_rc properties of remote controller, using rc-core
  * @rc_codes: name of rc codes table
  * @protocol: type of protocol(s) currently used by the driver
@@ -203,17 +170,6 @@ struct dvb_rc {
 };
 
 /**
- * enum dvb_usb_mode - Specifies if it is using a legacy driver or a new one
- *		       based on rc-core
- * This is initialized/used only inside dvb-usb-remote.c.
- * It shouldn't be set by the drivers.
- */
-enum dvb_usb_mode {
-	DVB_RC_LEGACY,
-	DVB_RC_CORE,
-};
-
-/**
  * struct dvb_usb_device_properties - properties of a dvb-usb-device
  * @owner: owner of the dvb_adapter
  * @usb_ctrl: which USB device-side controller is in use. Needed for firmware
@@ -283,16 +239,12 @@ struct dvb_usb_device_properties {
 	int (*identify_state) (struct dvb_usb_device *);
 	int (*init) (struct dvb_usb_device *);
 
-	struct {
-		enum dvb_usb_mode mode;	/* Drivers shouldn't touch on it */
-		struct dvb_rc_legacy legacy;
-		struct dvb_rc core;
-	} rc;
-
 	struct i2c_algorithm *i2c_algo;
 
 	int generic_bulk_ctrl_endpoint;
 	int generic_bulk_ctrl_endpoint_response;
+
+	struct dvb_rc rc;
 };
 
 /**
@@ -419,7 +371,7 @@ struct dvb_usb_adapter {
 struct dvb_usb_device {
 	struct dvb_usb_device_properties props;
 	const char *name;
-
+	const char *rc_map;
 	struct usb_device *udev;
 
 #define DVB_USB_STATE_INIT        0x000
@@ -460,10 +412,6 @@ extern int dvb_usbv2_generic_rw(struct dvb_usb_device *, u8 *, u16, u8 *, u16,
 		int);
 extern int dvb_usbv2_generic_write(struct dvb_usb_device *, u8 *, u16);
 
-/* commonly used remote control parsing */
-extern int dvb_usbv2_nec_rc_key_to_event(struct dvb_usb_device *, u8[], u32 *,
-		int *);
-
 /* commonly used firmware download types and function */
 struct hexline {
 	u8 len;
diff --git a/drivers/media/dvb/dvb-usb/dvb_usb_init.c b/drivers/media/dvb/dvb-usb/dvb_usb_init.c
index d694ea9ecc9..e1a3ed65cfb 100644
--- a/drivers/media/dvb/dvb-usb/dvb_usb_init.c
+++ b/drivers/media/dvb/dvb-usb/dvb_usb_init.c
@@ -259,6 +259,7 @@ int dvb_usbv2_device_init(struct usb_interface *intf,
 
 	d->udev = udev;
 	d->name = driver_info->name;
+	d->rc_map = driver_info->rc_map;
 	memcpy(&d->props, props, sizeof(struct dvb_usb_device_properties));
 
 	if (d->props.size_of_priv > 0) {
diff --git a/drivers/media/dvb/dvb-usb/dvb_usb_remote.c b/drivers/media/dvb/dvb-usb/dvb_usb_remote.c
index b445990644a..b8d2cb193bb 100644
--- a/drivers/media/dvb/dvb-usb/dvb_usb_remote.c
+++ b/drivers/media/dvb/dvb-usb/dvb_usb_remote.c
@@ -9,200 +9,6 @@
 #include "dvb_usb_common.h"
 #include <linux/usb/input.h>
 
-static unsigned int
-legacy_dvb_usb_get_keymap_index(const struct input_keymap_entry *ke,
-				struct rc_map_table *keymap,
-				unsigned int keymap_size)
-{
-	unsigned int index;
-	unsigned int scancode;
-
-	if (ke->flags & INPUT_KEYMAP_BY_INDEX) {
-		index = ke->index;
-	} else {
-		if (input_scancode_to_scalar(ke, &scancode))
-			return keymap_size;
-
-		/* See if we can match the raw key code. */
-		for (index = 0; index < keymap_size; index++)
-			if (keymap[index].scancode == scancode)
-				break;
-
-		/* See if there is an unused hole in the map */
-		if (index >= keymap_size) {
-			for (index = 0; index < keymap_size; index++) {
-				if (keymap[index].keycode == KEY_RESERVED ||
-				    keymap[index].keycode == KEY_UNKNOWN) {
-					break;
-				}
-			}
-		}
-	}
-
-	return index;
-}
-
-static int legacy_dvb_usb_getkeycode(struct input_dev *dev,
-				     struct input_keymap_entry *ke)
-{
-	struct dvb_usb_device *d = input_get_drvdata(dev);
-	struct rc_map_table *keymap = d->props.rc.legacy.rc_map_table;
-	unsigned int keymap_size = d->props.rc.legacy.rc_map_size;
-	unsigned int index;
-
-	index = legacy_dvb_usb_get_keymap_index(ke, keymap, keymap_size);
-	if (index >= keymap_size)
-		return -EINVAL;
-
-	ke->keycode = keymap[index].keycode;
-	if (ke->keycode == KEY_UNKNOWN)
-		ke->keycode = KEY_RESERVED;
-	ke->len = sizeof(keymap[index].scancode);
-	memcpy(&ke->scancode, &keymap[index].scancode, ke->len);
-	ke->index = index;
-
-	return 0;
-}
-
-static int legacy_dvb_usb_setkeycode(struct input_dev *dev,
-				     const struct input_keymap_entry *ke,
-				     unsigned int *old_keycode)
-{
-	struct dvb_usb_device *d = input_get_drvdata(dev);
-	struct rc_map_table *keymap = d->props.rc.legacy.rc_map_table;
-	unsigned int keymap_size = d->props.rc.legacy.rc_map_size;
-	unsigned int index;
-
-	index = legacy_dvb_usb_get_keymap_index(ke, keymap, keymap_size);
-	/*
-	 * FIXME: Currently, it is not possible to increase the size of
-	 * scancode table. For it to happen, one possibility
-	 * would be to allocate a table with key_map_size + 1,
-	 * copying data, appending the new key on it, and freeing
-	 * the old one - or maybe just allocating some spare space
-	 */
-	if (index >= keymap_size)
-		return -EINVAL;
-
-	*old_keycode = keymap[index].keycode;
-	keymap->keycode = ke->keycode;
-	__set_bit(ke->keycode, dev->keybit);
-
-	if (*old_keycode != KEY_RESERVED) {
-		__clear_bit(*old_keycode, dev->keybit);
-		for (index = 0; index < keymap_size; index++) {
-			if (keymap[index].keycode == *old_keycode) {
-				__set_bit(*old_keycode, dev->keybit);
-				break;
-			}
-		}
-	}
-
-	return 0;
-}
-
-/* Remote-control poll function - called every dib->rc_query_interval ms to see
- * whether the remote control has received anything.
- *
- * TODO: Fix the repeat rate of the input device.
- */
-static void legacy_dvb_usb_read_remote_control(struct work_struct *work)
-{
-	struct dvb_usb_device *d =
-		container_of(work, struct dvb_usb_device, rc_query_work.work);
-	u32 event;
-	int state;
-
-	/* TODO: need a lock here.  We can simply skip checking for the remote
-	   control if we're busy. */
-
-	/* when the parameter has been set to 1 via sysfs while the driver
-	   was running */
-	if (dvb_usb_disable_rc_polling)
-		return;
-
-	if (d->props.rc.legacy.rc_query(d, &event, &state)) {
-		err("error while querying for an remote control event.");
-		goto schedule;
-	}
-
-
-	switch (state) {
-	case REMOTE_NO_KEY_PRESSED:
-		break;
-	case REMOTE_KEY_PRESSED:
-		deb_rc("key pressed\n");
-		d->last_event = event;
-	case REMOTE_KEY_REPEAT:
-		deb_rc("key repeated\n");
-		input_event(d->input_dev, EV_KEY, event, 1);
-		input_sync(d->input_dev);
-		input_event(d->input_dev, EV_KEY, d->last_event, 0);
-		input_sync(d->input_dev);
-		break;
-	default:
-		break;
-	}
-
-schedule:
-	schedule_delayed_work(&d->rc_query_work,
-			msecs_to_jiffies(d->props.rc.legacy.rc_interval));
-}
-
-static int legacy_dvb_usb_remote_init(struct dvb_usb_device *d)
-{
-	int i, err, rc_interval;
-	struct input_dev *input_dev;
-
-	input_dev = input_allocate_device();
-	if (!input_dev)
-		return -ENOMEM;
-
-	input_dev->evbit[0] = BIT_MASK(EV_KEY);
-	input_dev->name = "IR-receiver inside an USB DVB receiver";
-	input_dev->phys = d->rc_phys;
-	usb_to_input_id(d->udev, &input_dev->id);
-	input_dev->dev.parent = &d->udev->dev;
-	d->input_dev = input_dev;
-	d->rc_dev = NULL;
-
-	input_dev->getkeycode = legacy_dvb_usb_getkeycode;
-	input_dev->setkeycode = legacy_dvb_usb_setkeycode;
-
-	/* set the bits for the keys */
-	deb_rc("key map size: %d\n", d->props.rc.legacy.rc_map_size);
-	for (i = 0; i < d->props.rc.legacy.rc_map_size; i++) {
-		deb_rc("setting bit for event %d item %d\n",
-			d->props.rc.legacy.rc_map_table[i].keycode, i);
-		set_bit(d->props.rc.legacy.rc_map_table[i].keycode,
-				input_dev->keybit);
-	}
-
-	/* setting these two values to non-zero, we have to manage key
-	   repeats */
-	input_dev->rep[REP_PERIOD] = d->props.rc.legacy.rc_interval;
-	input_dev->rep[REP_DELAY]  = d->props.rc.legacy.rc_interval + 150;
-
-	input_set_drvdata(input_dev, d);
-
-	err = input_register_device(input_dev);
-	if (err)
-		input_free_device(input_dev);
-
-	rc_interval = d->props.rc.legacy.rc_interval;
-
-	INIT_DELAYED_WORK(&d->rc_query_work,
-			legacy_dvb_usb_read_remote_control);
-
-	info("schedule remote query interval to %d msecs.", rc_interval);
-	schedule_delayed_work(&d->rc_query_work,
-			      msecs_to_jiffies(rc_interval));
-
-	d->state |= DVB_USB_STATE_REMOTE;
-
-	return err;
-}
-
 /* Remote-control poll function - called every dib->rc_query_interval ms to see
  * whether the remote control has received anything.
  *
@@ -220,16 +26,16 @@ static void dvb_usb_read_remote_control(struct work_struct *work)
 	/* when the parameter has been set to 1 via sysfs while the
 	 * driver was running, or when bulk mode is enabled after IR init
 	 */
-	if (dvb_usb_disable_rc_polling || d->props.rc.core.bulk_mode)
+	if (dvb_usb_disable_rc_polling || d->props.rc.bulk_mode)
 		return;
 
-	err = d->props.rc.core.rc_query(d);
+	err = d->props.rc.rc_query(d);
 	if (err)
 		err("error %d while querying for an remote control event.",
 			err);
 
 	schedule_delayed_work(&d->rc_query_work,
-			      msecs_to_jiffies(d->props.rc.core.rc_interval));
+			      msecs_to_jiffies(d->props.rc.rc_interval));
 }
 
 static int rc_core_dvb_usb_remote_init(struct dvb_usb_device *d)
@@ -241,17 +47,21 @@ static int rc_core_dvb_usb_remote_init(struct dvb_usb_device *d)
 	if (!dev)
 		return -ENOMEM;
 
-	dev->driver_name = d->props.rc.core.module_name;
-	dev->map_name = d->props.rc.core.rc_codes;
-	dev->change_protocol = d->props.rc.core.change_protocol;
-	dev->allowed_protos = d->props.rc.core.allowed_protos;
-	dev->driver_type = d->props.rc.core.driver_type;
+	dev->driver_name = d->props.rc.module_name;
+	dev->map_name = d->rc_map;
+	dev->change_protocol = d->props.rc.change_protocol;
+	dev->allowed_protos = d->props.rc.allowed_protos;
+	dev->driver_type = d->props.rc.driver_type;
 	usb_to_input_id(d->udev, &dev->input_id);
 	dev->input_name = "IR-receiver inside an USB DVB receiver";
 	dev->input_phys = d->rc_phys;
 	dev->dev.parent = &d->udev->dev;
 	dev->priv = d;
 
+	/* leave remote controller enabled even there is no default map */
+	if (dev->map_name == NULL)
+		dev->map_name = RC_MAP_EMPTY;
+
 	err = rc_register_device(dev);
 	if (err < 0) {
 		rc_free_device(dev);
@@ -261,13 +71,13 @@ static int rc_core_dvb_usb_remote_init(struct dvb_usb_device *d)
 	d->input_dev = NULL;
 	d->rc_dev = dev;
 
-	if (!d->props.rc.core.rc_query || d->props.rc.core.bulk_mode)
+	if (!d->props.rc.rc_query || d->props.rc.bulk_mode)
 		return 0;
 
 	/* Polling mode - initialize a work queue for handling it */
 	INIT_DELAYED_WORK(&d->rc_query_work, dvb_usb_read_remote_control);
 
-	rc_interval = d->props.rc.core.rc_interval;
+	rc_interval = d->props.rc.rc_interval;
 
 	info("schedule remote query interval to %d msecs.", rc_interval);
 	schedule_delayed_work(&d->rc_query_work,
@@ -283,24 +93,14 @@ int dvb_usb_remote_init(struct dvb_usb_device *d)
 	if (dvb_usb_disable_rc_polling)
 		return 0;
 
-	if (d->props.rc.legacy.rc_map_table && d->props.rc.legacy.rc_query)
-		d->props.rc.mode = DVB_RC_LEGACY;
-	else if (d->props.rc.core.rc_codes)
-		d->props.rc.mode = DVB_RC_CORE;
-	else
+	if (d->props.rc.module_name == NULL)
 		return 0;
 
 	usb_make_path(d->udev, d->rc_phys, sizeof(d->rc_phys));
 	strlcat(d->rc_phys, "/ir0", sizeof(d->rc_phys));
 
 	/* Start the remote-control polling. */
-	if (d->props.rc.legacy.rc_interval < 40)
-		d->props.rc.legacy.rc_interval = 100; /* default */
-
-	if (d->props.rc.mode == DVB_RC_LEGACY)
-		err = legacy_dvb_usb_remote_init(d);
-	else
-		err = rc_core_dvb_usb_remote_init(d);
+	err = rc_core_dvb_usb_remote_init(d);
 	if (err)
 		return err;
 
@@ -313,52 +113,8 @@ int dvb_usb_remote_exit(struct dvb_usb_device *d)
 {
 	if (d->state & DVB_USB_STATE_REMOTE) {
 		cancel_delayed_work_sync(&d->rc_query_work);
-		if (d->props.rc.mode == DVB_RC_LEGACY)
-			input_unregister_device(d->input_dev);
-		else
-			rc_unregister_device(d->rc_dev);
+		rc_unregister_device(d->rc_dev);
 	}
 	d->state &= ~DVB_USB_STATE_REMOTE;
 	return 0;
 }
-
-#define DVB_USB_RC_NEC_EMPTY           0x00
-#define DVB_USB_RC_NEC_KEY_PRESSED     0x01
-#define DVB_USB_RC_NEC_KEY_REPEATED    0x02
-int dvb_usbv2_nec_rc_key_to_event(struct dvb_usb_device *d,
-		u8 keybuf[5], u32 *event, int *state)
-{
-	int i;
-	struct rc_map_table *keymap = d->props.rc.legacy.rc_map_table;
-	*event = 0;
-	*state = REMOTE_NO_KEY_PRESSED;
-	switch (keybuf[0]) {
-	case DVB_USB_RC_NEC_EMPTY:
-		break;
-	case DVB_USB_RC_NEC_KEY_PRESSED:
-		if ((u8) ~keybuf[1] != keybuf[2] ||
-			(u8) ~keybuf[3] != keybuf[4]) {
-			deb_err("remote control checksum failed.\n");
-			break;
-		}
-		/* See if we can match the raw key code. */
-		for (i = 0; i < d->props.rc.legacy.rc_map_size; i++)
-			if (rc5_custom(&keymap[i]) == keybuf[1] &&
-				rc5_data(&keymap[i]) == keybuf[3]) {
-				*event = keymap[i].keycode;
-				*state = REMOTE_KEY_PRESSED;
-				return 0;
-			}
-		deb_err("key mapping failed - no appropriate key found in" \
-				" keymapping\n");
-		break;
-	case DVB_USB_RC_NEC_KEY_REPEATED:
-		*state = REMOTE_KEY_REPEAT;
-		break;
-	default:
-		deb_err("unknown type of remote status: %d\n", keybuf[0]);
-		break;
-	}
-	return 0;
-}
-EXPORT_SYMBOL(dvb_usbv2_nec_rc_key_to_event);