diff options
author | Arnd Bergmann <arnd@arndb.de> | 2012-03-02 13:05:00 +0000 |
---|---|---|
committer | Arnd Bergmann <arnd@arndb.de> | 2012-03-02 13:05:00 +0000 |
commit | 1220547bfd7f7dd97f770a04b533323e5404b8e9 (patch) | |
tree | a4231b9570f3302f032a2d757fb3af24a4238d46 | |
parent | a26d3c4fcd4bb875ae5adc32f27fab7a478bb00d (diff) | |
parent | f86bcc302a8c570dd0f5a50097a6af96a0e717c2 (diff) |
Merge branch 'depends/omap/gpio/runtime-pm-cleanup' into next/cleanup
Conflicts:
arch/arm/mach-omap1/gpio16xx.c
drivers/gpio/gpio-omap.c
Merge in the runtime-pm-cleanup branch from the gpio tree into
next/cleanup, this resolves a nonobvious merge conflict between
the two branches. Both branches move parts of the gpio-omap
driver into platform code, this takes the superset of both
changes.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-rw-r--r-- | arch/arm/mach-omap1/gpio15xx.c | 7 | ||||
-rw-r--r-- | arch/arm/mach-omap1/gpio16xx.c | 40 | ||||
-rw-r--r-- | arch/arm/mach-omap1/gpio7xx.c | 14 | ||||
-rw-r--r-- | arch/arm/mach-omap2/gpio.c | 36 | ||||
-rw-r--r-- | arch/arm/mach-omap2/pm34xx.c | 14 | ||||
-rw-r--r-- | arch/arm/plat-omap/include/plat/gpio.h | 29 | ||||
-rw-r--r-- | drivers/gpio/gpio-omap.c | 1101 |
7 files changed, 549 insertions, 692 deletions
diff --git a/arch/arm/mach-omap1/gpio15xx.c b/arch/arm/mach-omap1/gpio15xx.c index 399da4ce017..634903ef829 100644 --- a/arch/arm/mach-omap1/gpio15xx.c +++ b/arch/arm/mach-omap1/gpio15xx.c @@ -42,11 +42,12 @@ static struct omap_gpio_reg_offs omap15xx_mpuio_regs = { .irqstatus = OMAP_MPUIO_GPIO_INT, .irqenable = OMAP_MPUIO_GPIO_MASKIT, .irqenable_inv = true, + .irqctrl = OMAP_MPUIO_GPIO_INT_EDGE, }; static struct __initdata omap_gpio_platform_data omap15xx_mpu_gpio_config = { .virtual_irq_start = IH_MPUIO_BASE, - .bank_type = METHOD_MPUIO, + .is_mpuio = true, .bank_width = 16, .bank_stride = 1, .regs = &omap15xx_mpuio_regs, @@ -83,11 +84,12 @@ static struct omap_gpio_reg_offs omap15xx_gpio_regs = { .irqstatus = OMAP1510_GPIO_INT_STATUS, .irqenable = OMAP1510_GPIO_INT_MASK, .irqenable_inv = true, + .irqctrl = OMAP1510_GPIO_INT_CONTROL, + .pinctrl = OMAP1510_GPIO_PIN_CONTROL, }; static struct __initdata omap_gpio_platform_data omap15xx_gpio_config = { .virtual_irq_start = IH_GPIO_BASE, - .bank_type = METHOD_GPIO_1510, .bank_width = 16, .regs = &omap15xx_gpio_regs, }; @@ -115,7 +117,6 @@ static int __init omap15xx_gpio_init(void) platform_device_register(&omap15xx_mpu_gpio); platform_device_register(&omap15xx_gpio); - gpio_bank_count = 2; return 0; } postcore_initcall(omap15xx_gpio_init); diff --git a/arch/arm/mach-omap1/gpio16xx.c b/arch/arm/mach-omap1/gpio16xx.c index 99cabc498ab..1fb3b9ad496 100644 --- a/arch/arm/mach-omap1/gpio16xx.c +++ b/arch/arm/mach-omap1/gpio16xx.c @@ -24,6 +24,9 @@ #define OMAP1610_GPIO4_BASE 0xfffbbc00 #define OMAP1_MPUIO_VBASE OMAP1_MPUIO_BASE +/* smart idle, enable wakeup */ +#define SYSCONFIG_WORD 0x14 + /* mpu gpio */ static struct __initdata resource omap16xx_mpu_gpio_resources[] = { { @@ -45,11 +48,12 @@ static struct omap_gpio_reg_offs omap16xx_mpuio_regs = { .irqstatus = OMAP_MPUIO_GPIO_INT, .irqenable = OMAP_MPUIO_GPIO_MASKIT, .irqenable_inv = true, + .irqctrl = OMAP_MPUIO_GPIO_INT_EDGE, }; static struct __initdata omap_gpio_platform_data omap16xx_mpu_gpio_config = { .virtual_irq_start = IH_MPUIO_BASE, - .bank_type = METHOD_MPUIO, + .is_mpuio = true, .bank_width = 16, .bank_stride = 1, .regs = &omap16xx_mpuio_regs, @@ -89,11 +93,13 @@ static struct omap_gpio_reg_offs omap16xx_gpio_regs = { .irqenable = OMAP1610_GPIO_IRQENABLE1, .set_irqenable = OMAP1610_GPIO_SET_IRQENABLE1, .clr_irqenable = OMAP1610_GPIO_CLEAR_IRQENABLE1, + .wkup_en = OMAP1610_GPIO_WAKEUPENABLE, + .edgectrl1 = OMAP1610_GPIO_EDGE_CTRL1, + .edgectrl2 = OMAP1610_GPIO_EDGE_CTRL2, }; static struct __initdata omap_gpio_platform_data omap16xx_gpio1_config = { .virtual_irq_start = IH_GPIO_BASE, - .bank_type = METHOD_GPIO_1610, .bank_width = 16, .regs = &omap16xx_gpio_regs, }; @@ -123,7 +129,6 @@ static struct __initdata resource omap16xx_gpio2_resources[] = { static struct __initdata omap_gpio_platform_data omap16xx_gpio2_config = { .virtual_irq_start = IH_GPIO_BASE + 16, - .bank_type = METHOD_GPIO_1610, .bank_width = 16, .regs = &omap16xx_gpio_regs, }; @@ -153,7 +158,6 @@ static struct __initdata resource omap16xx_gpio3_resources[] = { static struct __initdata omap_gpio_platform_data omap16xx_gpio3_config = { .virtual_irq_start = IH_GPIO_BASE + 32, - .bank_type = METHOD_GPIO_1610, .bank_width = 16, .regs = &omap16xx_gpio_regs, }; @@ -183,7 +187,6 @@ static struct __initdata resource omap16xx_gpio4_resources[] = { static struct __initdata omap_gpio_platform_data omap16xx_gpio4_config = { .virtual_irq_start = IH_GPIO_BASE + 48, - .bank_type = METHOD_GPIO_1610, .bank_width = 16, .regs = &omap16xx_gpio_regs, }; @@ -214,6 +217,10 @@ static struct __initdata platform_device * omap16xx_gpio_dev[] = { static int __init omap16xx_gpio_init(void) { int i; + void __iomem *base; + struct resource *res; + struct platform_device *pdev; + struct omap_gpio_platform_data *pdata; if (!cpu_is_omap16xx()) return -EINVAL; @@ -225,10 +232,27 @@ static int __init omap16xx_gpio_init(void) omap_writel(omap_readl(ULPD_CAM_CLK_CTRL) | 0x04, ULPD_CAM_CLK_CTRL); - for (i = 0; i < ARRAY_SIZE(omap16xx_gpio_dev); i++) - platform_device_register(omap16xx_gpio_dev[i]); + for (i = 0; i < ARRAY_SIZE(omap16xx_gpio_dev); i++) { + pdev = omap16xx_gpio_dev[i]; + pdata = pdev->dev.platform_data; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (unlikely(!res)) { + dev_err(&pdev->dev, "Invalid mem resource.\n"); + return -ENODEV; + } - gpio_bank_count = ARRAY_SIZE(omap16xx_gpio_dev); + base = ioremap(res->start, resource_size(res)); + if (unlikely(!base)) { + dev_err(&pdev->dev, "ioremap failed.\n"); + return -ENOMEM; + } + + __raw_writel(SYSCONFIG_WORD, base + OMAP1610_GPIO_SYSCONFIG); + iounmap(base); + + platform_device_register(omap16xx_gpio_dev[i]); + } return 0; } diff --git a/arch/arm/mach-omap1/gpio7xx.c b/arch/arm/mach-omap1/gpio7xx.c index 5ab63eab0ff..4771d6b68b9 100644 --- a/arch/arm/mach-omap1/gpio7xx.c +++ b/arch/arm/mach-omap1/gpio7xx.c @@ -47,12 +47,13 @@ static struct omap_gpio_reg_offs omap7xx_mpuio_regs = { .irqstatus = OMAP_MPUIO_GPIO_INT / 2, .irqenable = OMAP_MPUIO_GPIO_MASKIT / 2, .irqenable_inv = true, + .irqctrl = OMAP_MPUIO_GPIO_INT_EDGE >> 1, }; static struct __initdata omap_gpio_platform_data omap7xx_mpu_gpio_config = { .virtual_irq_start = IH_MPUIO_BASE, - .bank_type = METHOD_MPUIO, - .bank_width = 32, + .is_mpuio = true, + .bank_width = 16, .bank_stride = 2, .regs = &omap7xx_mpuio_regs, }; @@ -88,11 +89,11 @@ static struct omap_gpio_reg_offs omap7xx_gpio_regs = { .irqstatus = OMAP7XX_GPIO_INT_STATUS, .irqenable = OMAP7XX_GPIO_INT_MASK, .irqenable_inv = true, + .irqctrl = OMAP7XX_GPIO_INT_CONTROL, }; static struct __initdata omap_gpio_platform_data omap7xx_gpio1_config = { .virtual_irq_start = IH_GPIO_BASE, - .bank_type = METHOD_GPIO_7XX, .bank_width = 32, .regs = &omap7xx_gpio_regs, }; @@ -122,7 +123,6 @@ static struct __initdata resource omap7xx_gpio2_resources[] = { static struct __initdata omap_gpio_platform_data omap7xx_gpio2_config = { .virtual_irq_start = IH_GPIO_BASE + 32, - .bank_type = METHOD_GPIO_7XX, .bank_width = 32, .regs = &omap7xx_gpio_regs, }; @@ -152,7 +152,6 @@ static struct __initdata resource omap7xx_gpio3_resources[] = { static struct __initdata omap_gpio_platform_data omap7xx_gpio3_config = { .virtual_irq_start = IH_GPIO_BASE + 64, - .bank_type = METHOD_GPIO_7XX, .bank_width = 32, .regs = &omap7xx_gpio_regs, }; @@ -182,7 +181,6 @@ static struct __initdata resource omap7xx_gpio4_resources[] = { static struct __initdata omap_gpio_platform_data omap7xx_gpio4_config = { .virtual_irq_start = IH_GPIO_BASE + 96, - .bank_type = METHOD_GPIO_7XX, .bank_width = 32, .regs = &omap7xx_gpio_regs, }; @@ -212,7 +210,6 @@ static struct __initdata resource omap7xx_gpio5_resources[] = { static struct __initdata omap_gpio_platform_data omap7xx_gpio5_config = { .virtual_irq_start = IH_GPIO_BASE + 128, - .bank_type = METHOD_GPIO_7XX, .bank_width = 32, .regs = &omap7xx_gpio_regs, }; @@ -242,7 +239,6 @@ static struct __initdata resource omap7xx_gpio6_resources[] = { static struct __initdata omap_gpio_platform_data omap7xx_gpio6_config = { .virtual_irq_start = IH_GPIO_BASE + 160, - .bank_type = METHOD_GPIO_7XX, .bank_width = 32, .regs = &omap7xx_gpio_regs, }; @@ -282,8 +278,6 @@ static int __init omap7xx_gpio_init(void) for (i = 0; i < ARRAY_SIZE(omap7xx_gpio_dev); i++) platform_device_register(omap7xx_gpio_dev[i]); - gpio_bank_count = ARRAY_SIZE(omap7xx_gpio_dev); - return 0; } postcore_initcall(omap7xx_gpio_init); diff --git a/arch/arm/mach-omap2/gpio.c b/arch/arm/mach-omap2/gpio.c index 8cbfbc2918c..1e0b750afca 100644 --- a/arch/arm/mach-omap2/gpio.c +++ b/arch/arm/mach-omap2/gpio.c @@ -23,6 +23,9 @@ #include <plat/omap_hwmod.h> #include <plat/omap_device.h> +#include <plat/omap-pm.h> + +#include "powerdomain.h" static int omap2_gpio_dev_init(struct omap_hwmod *oh, void *unused) { @@ -31,6 +34,7 @@ static int omap2_gpio_dev_init(struct omap_hwmod *oh, void *unused) struct omap_gpio_dev_attr *dev_attr; char *name = "omap_gpio"; int id; + struct powerdomain *pwrdm; /* * extract the device id from name field available in the @@ -52,7 +56,7 @@ static int omap2_gpio_dev_init(struct omap_hwmod *oh, void *unused) pdata->bank_width = dev_attr->bank_width; pdata->dbck_flag = dev_attr->dbck_flag; pdata->virtual_irq_start = IH_GPIO_BASE + 32 * (id - 1); - + pdata->get_context_loss_count = omap_pm_get_dev_context_loss_count; pdata->regs = kzalloc(sizeof(struct omap_gpio_reg_offs), GFP_KERNEL); if (!pdata) { pr_err("gpio%d: Memory allocation failed\n", id); @@ -61,8 +65,15 @@ static int omap2_gpio_dev_init(struct omap_hwmod *oh, void *unused) switch (oh->class->rev) { case 0: + if (id == 1) + /* non-wakeup GPIO pins for OMAP2 Bank1 */ + pdata->non_wakeup_gpios = 0xe203ffc0; + else if (id == 2) + /* non-wakeup GPIO pins for OMAP2 Bank2 */ + pdata->non_wakeup_gpios = 0x08700040; + /* fall through */ + case 1: - pdata->bank_type = METHOD_GPIO_24XX; pdata->regs->revision = OMAP24XX_GPIO_REVISION; pdata->regs->direction = OMAP24XX_GPIO_OE; pdata->regs->datain = OMAP24XX_GPIO_DATAIN; @@ -72,13 +83,19 @@ static int omap2_gpio_dev_init(struct omap_hwmod *oh, void *unused) pdata->regs->irqstatus = OMAP24XX_GPIO_IRQSTATUS1; pdata->regs->irqstatus2 = OMAP24XX_GPIO_IRQSTATUS2; pdata->regs->irqenable = OMAP24XX_GPIO_IRQENABLE1; + pdata->regs->irqenable2 = OMAP24XX_GPIO_IRQENABLE2; pdata->regs->set_irqenable = OMAP24XX_GPIO_SETIRQENABLE1; pdata->regs->clr_irqenable = OMAP24XX_GPIO_CLEARIRQENABLE1; pdata->regs->debounce = OMAP24XX_GPIO_DEBOUNCE_VAL; pdata->regs->debounce_en = OMAP24XX_GPIO_DEBOUNCE_EN; + pdata->regs->ctrl = OMAP24XX_GPIO_CTRL; + pdata->regs->wkup_en = OMAP24XX_GPIO_WAKE_EN; + pdata->regs->leveldetect0 = OMAP24XX_GPIO_LEVELDETECT0; + pdata->regs->leveldetect1 = OMAP24XX_GPIO_LEVELDETECT1; + pdata->regs->risingdetect = OMAP24XX_GPIO_RISINGDETECT; + pdata->regs->fallingdetect = OMAP24XX_GPIO_FALLINGDETECT; break; case 2: - pdata->bank_type = METHOD_GPIO_44XX; pdata->regs->revision = OMAP4_GPIO_REVISION; pdata->regs->direction = OMAP4_GPIO_OE; pdata->regs->datain = OMAP4_GPIO_DATAIN; @@ -88,10 +105,17 @@ static int omap2_gpio_dev_init(struct omap_hwmod *oh, void *unused) pdata->regs->irqstatus = OMAP4_GPIO_IRQSTATUS0; pdata->regs->irqstatus2 = OMAP4_GPIO_IRQSTATUS1; pdata->regs->irqenable = OMAP4_GPIO_IRQSTATUSSET0; + pdata->regs->irqenable2 = OMAP4_GPIO_IRQSTATUSSET1; pdata->regs->set_irqenable = OMAP4_GPIO_IRQSTATUSSET0; pdata->regs->clr_irqenable = OMAP4_GPIO_IRQSTATUSCLR0; pdata->regs->debounce = OMAP4_GPIO_DEBOUNCINGTIME; pdata->regs->debounce_en = OMAP4_GPIO_DEBOUNCENABLE; + pdata->regs->ctrl = OMAP4_GPIO_CTRL; + pdata->regs->wkup_en = OMAP4_GPIO_IRQWAKEN0; + pdata->regs->leveldetect0 = OMAP4_GPIO_LEVELDETECT0; + pdata->regs->leveldetect1 = OMAP4_GPIO_LEVELDETECT1; + pdata->regs->risingdetect = OMAP4_GPIO_RISINGDETECT; + pdata->regs->fallingdetect = OMAP4_GPIO_FALLINGDETECT; break; default: WARN(1, "Invalid gpio bank_type\n"); @@ -99,6 +123,9 @@ static int omap2_gpio_dev_init(struct omap_hwmod *oh, void *unused) return -EINVAL; } + pwrdm = omap_hwmod_get_pwrdm(oh); + pdata->loses_context = pwrdm_can_ever_lose_context(pwrdm); + pdev = omap_device_build(name, id - 1, oh, pdata, sizeof(*pdata), NULL, 0, false); kfree(pdata); @@ -109,9 +136,6 @@ static int omap2_gpio_dev_init(struct omap_hwmod *oh, void *unused) return PTR_ERR(pdev); } - omap_device_disable_idle_on_suspend(pdev); - - gpio_bank_count++; return 0; } diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c index b77df735fa6..816c7940d30 100644 --- a/arch/arm/mach-omap2/pm34xx.c +++ b/arch/arm/mach-omap2/pm34xx.c @@ -75,16 +75,6 @@ static struct powerdomain *mpu_pwrdm, *neon_pwrdm; static struct powerdomain *core_pwrdm, *per_pwrdm; static struct powerdomain *cam_pwrdm; -static inline void omap3_per_save_context(void) -{ - omap_gpio_save_context(); -} - -static inline void omap3_per_restore_context(void) -{ - omap_gpio_restore_context(); -} - static void omap3_enable_io_chain(void) { int timeout = 0; @@ -332,8 +322,6 @@ void omap_sram_idle(void) if (per_next_state < PWRDM_POWER_ON) { per_going_off = (per_next_state == PWRDM_POWER_OFF) ? 1 : 0; omap2_gpio_prepare_for_idle(per_going_off); - if (per_next_state == PWRDM_POWER_OFF) - omap3_per_save_context(); } /* CORE */ @@ -399,8 +387,6 @@ void omap_sram_idle(void) if (per_next_state < PWRDM_POWER_ON) { per_prev_state = pwrdm_read_prev_pwrst(per_pwrdm); omap2_gpio_resume_after_idle(); - if (per_prev_state == PWRDM_POWER_OFF) - omap3_per_restore_context(); } /* Disable IO-PAD and IO-CHAIN wakeup */ diff --git a/arch/arm/plat-omap/include/plat/gpio.h b/arch/arm/plat-omap/include/plat/gpio.h index 9e86ee0aed0..cb75b657b04 100644 --- a/arch/arm/plat-omap/include/plat/gpio.h +++ b/arch/arm/plat-omap/include/plat/gpio.h @@ -162,13 +162,6 @@ IH_MPUIO_BASE + ((nr) & 0x0f) : \ IH_GPIO_BASE + (nr)) -#define METHOD_MPUIO 0 -#define METHOD_GPIO_1510 1 -#define METHOD_GPIO_1610 2 -#define METHOD_GPIO_7XX 3 -#define METHOD_GPIO_24XX 5 -#define METHOD_GPIO_44XX 6 - struct omap_gpio_dev_attr { int bank_width; /* GPIO bank width */ bool dbck_flag; /* dbck required or not - True for OMAP3&4 */ @@ -184,10 +177,21 @@ struct omap_gpio_reg_offs { u16 irqstatus; u16 irqstatus2; u16 irqenable; + u16 irqenable2; u16 set_irqenable; u16 clr_irqenable; u16 debounce; u16 debounce_en; + u16 ctrl; + u16 wkup_en; + u16 leveldetect0; + u16 leveldetect1; + u16 risingdetect; + u16 fallingdetect; + u16 irqctrl; + u16 edgectrl1; + u16 edgectrl2; + u16 pinctrl; bool irqenable_inv; }; @@ -198,19 +202,20 @@ struct omap_gpio_platform_data { int bank_width; /* GPIO bank width */ int bank_stride; /* Only needed for omap1 MPUIO */ bool dbck_flag; /* dbck required or not - True for OMAP3&4 */ + bool loses_context; /* whether the bank would ever lose context */ + bool is_mpuio; /* whether the bank is of type MPUIO */ + u32 non_wakeup_gpios; struct omap_gpio_reg_offs *regs; -}; -/* TODO: Analyze removing gpio_bank_count usage from driver code */ -extern int gpio_bank_count; + /* Return context loss count due to PM states changing */ + int (*get_context_loss_count)(struct device *dev); +}; extern void omap2_gpio_prepare_for_idle(int off_mode); extern void omap2_gpio_resume_after_idle(void); extern void omap_set_gpio_debounce(int gpio, int enable); extern void omap_set_gpio_debounce_time(int gpio, int enable); -extern void omap_gpio_save_context(void); -extern void omap_gpio_restore_context(void); /*-------------------------------------------------------------------------*/ /* Wrappers for "new style" GPIO calls, using the new infrastructure diff --git a/drivers/gpio/gpio-omap.c b/drivers/gpio/gpio-omap.c index 5b7b164e08a..f49bd6f47a5 100644 --- a/drivers/gpio/gpio-omap.c +++ b/drivers/gpio/gpio-omap.c @@ -21,6 +21,7 @@ #include <linux/io.h> #include <linux/slab.h> #include <linux/pm_runtime.h> +#include <linux/pm.h> #include <mach/hardware.h> #include <asm/irq.h> @@ -28,19 +29,36 @@ #include <asm/gpio.h> #include <asm/mach/irq.h> +#define OFF_MODE 1 + +static LIST_HEAD(omap_gpio_list); + +struct gpio_regs { + u32 irqenable1; + u32 irqenable2; + u32 wake_en; + u32 ctrl; + u32 oe; + u32 leveldetect0; + u32 leveldetect1; + u32 risingdetect; + u32 fallingdetect; + u32 dataout; + u32 debounce; + u32 debounce_en; +}; + struct gpio_bank { + struct list_head node; unsigned long pbase; void __iomem *base; u16 irq; u16 virtual_irq_start; - int method; u32 suspend_wakeup; -#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP2PLUS) u32 saved_wakeup; -#endif u32 non_wakeup_gpios; u32 enabled_non_wakeup_gpios; - + struct gpio_regs context; u32 saved_datain; u32 saved_fallingdetect; u32 saved_risingdetect; @@ -51,44 +69,27 @@ struct gpio_bank { struct clk *dbck; u32 mod_usage; u32 dbck_enable_mask; + bool dbck_enabled; struct device *dev; + bool is_mpuio; bool dbck_flag; + bool loses_context; int stride; u32 width; + int context_loss_count; + u16 id; + int power_mode; + bool workaround_enabled; void (*set_dataout)(struct gpio_bank *bank, int gpio, int enable); + int (*get_context_loss_count)(struct device *dev); struct omap_gpio_reg_offs *regs; }; -#ifdef CONFIG_ARCH_OMAP3 -struct omap3_gpio_regs { - u32 irqenable1; - u32 irqenable2; - u32 wake_en; - u32 ctrl; - u32 oe; - u32 leveldetect0; - u32 leveldetect1; - u32 risingdetect; - u32 fallingdetect; - u32 dataout; -}; - -static struct omap3_gpio_regs gpio_context[OMAP34XX_NR_GPIOS]; -#endif - -/* - * TODO: Cleanup gpio_bank usage as it is having information - * related to all instances of the device - */ -static struct gpio_bank *gpio_bank; - -/* TODO: Analyze removing gpio_bank_count usage from driver code */ -int gpio_bank_count; - #define GPIO_INDEX(bank, gpio) (gpio % bank->width) #define GPIO_BIT(bank, gpio) (1 << GPIO_INDEX(bank, gpio)) +#define GPIO_MOD_CTRL_BIT BIT(0) static void _set_gpio_direction(struct gpio_bank *bank, int gpio, int is_input) { @@ -102,6 +103,7 @@ static void _set_gpio_direction(struct gpio_bank *bank, int gpio, int is_input) else l &= ~(1 << gpio); __raw_writel(l, reg); + bank->context.oe = l; } @@ -132,6 +134,7 @@ static void _set_gpio_dataout_mask(struct gpio_bank *bank, int gpio, int enable) else l &= ~gpio_bit; __raw_writel(l, reg); + bank->context.dataout = l; } static int _get_gpio_datain(struct gpio_bank *bank, int gpio) @@ -160,6 +163,22 @@ static inline void _gpio_rmw(void __iomem *base, u32 reg, u32 mask, bool set) __raw_writel(l, base + reg); } +static inline void _gpio_dbck_enable(struct gpio_bank *bank) +{ + if (bank->dbck_enable_mask && !bank->dbck_enabled) { + clk_enable(bank->dbck); + bank->dbck_enabled = true; + } +} + +static inline void _gpio_dbck_disable(struct gpio_bank *bank) +{ + if (bank->dbck_enable_mask && bank->dbck_enabled) { + clk_disable(bank->dbck); + bank->dbck_enabled = false; + } +} + /** * _set_gpio_debounce - low level gpio debounce time * @bank: the gpio bank we're acting upon @@ -188,70 +207,74 @@ static void _set_gpio_debounce(struct gpio_bank *bank, unsigned gpio, l = GPIO_BIT(bank, gpio); + clk_enable(bank->dbck); reg = bank->base + bank->regs->debounce; __raw_writel(debounce, reg); reg = bank->base + bank->regs->debounce_en; val = __raw_readl(reg); - if (debounce) { + if (debounce) val |= l; - clk_enable(bank->dbck); - } else { + else val &= ~l; - clk_disable(bank->dbck); - } bank->dbck_enable_mask = val; __raw_writel(val, reg); + clk_disable(bank->dbck); + /* + * Enable debounce clock per module. + * This call is mandatory because in omap_gpio_request() when + * *_runtime_get_sync() is called, _gpio_dbck_enable() within + * runtime callbck fails to turn on dbck because dbck_enable_mask + * used within _gpio_dbck_enable() is still not initialized at + * that point. Therefore we have to enable dbck here. + */ + _gpio_dbck_enable(bank); + if (bank->dbck_enable_mask) { + bank->context.debounce = debounce; + bank->context.debounce_en = val; + } } -#ifdef CONFIG_ARCH_OMAP2PLUS -static inline void set_24xx_gpio_triggering(struct gpio_bank *bank, int gpio, +static inline void set_gpio_trigger(struct gpio_bank *bank, int gpio, int trigger) { void __iomem *base = bank->base; u32 gpio_bit = 1 << gpio; - if (cpu_is_omap44xx()) { - _gpio_rmw(base, OMAP4_GPIO_LEVELDETECT0, gpio_bit, - trigger & IRQ_TYPE_LEVEL_LOW); - _gpio_rmw(base, OMAP4_GPIO_LEVELDETECT1, gpio_bit, - trigger & IRQ_TYPE_LEVEL_HIGH); - _gpio_rmw(base, OMAP4_GPIO_RISINGDETECT, gpio_bit, - trigger & IRQ_TYPE_EDGE_RISING); - _gpio_rmw(base, OMAP4_GPIO_FALLINGDETECT, gpio_bit, - trigger & IRQ_TYPE_EDGE_FALLING); - } else { - _gpio_rmw(base, OMAP24XX_GPIO_LEVELDETECT0, gpio_bit, - trigger & IRQ_TYPE_LEVEL_LOW); - _gpio_rmw(base, OMAP24XX_GPIO_LEVELDETECT1, gpio_bit, - trigger & IRQ_TYPE_LEVEL_HIGH); - _gpio_rmw(base, OMAP24XX_GPIO_RISINGDETECT, gpio_bit, - trigger & IRQ_TYPE_EDGE_RISING); - _gpio_rmw(base, OMAP24XX_GPIO_FALLINGDETECT, gpio_bit, - trigger & IRQ_TYPE_EDGE_FALLING); - } + _gpio_rmw(base, bank->regs->leveldetect0, gpio_bit, + trigger & IRQ_TYPE_LEVEL_LOW); + _gpio_rmw(base, bank->regs->leveldetect1, gpio_bit, + trigger & IRQ_TYPE_LEVEL_HIGH); + _gpio_rmw(base, bank->regs->risingdetect, gpio_bit, + trigger & IRQ_TYPE_EDGE_RISING); + _gpio_rmw(base, bank->regs->fallingdetect, gpio_bit, + trigger & IRQ_TYPE_EDGE_FALLING); + + bank->context.leveldetect0 = + __raw_readl(bank->base + bank->regs->leveldetect0); + bank->context.leveldetect1 = + __raw_readl(bank->base + bank->regs->leveldetect1); + bank->context.risingdetect = + __raw_readl(bank->base + bank->regs->risingdetect); + bank->context.fallingdetect = + __raw_readl(bank->base + bank->regs->fallingdetect); + if (likely(!(bank->non_wakeup_gpios & gpio_bit))) { - if (cpu_is_omap44xx()) { - _gpio_rmw(base, OMAP4_GPIO_IRQWAKEN0, gpio_bit, - trigger != 0); - } else { - /* - * GPIO wakeup request can only be generated on edge - * transitions - */ - if (trigger & IRQ_TYPE_EDGE_BOTH) - __raw_writel(1 << gpio, bank->base - + OMAP24XX_GPIO_SETWKUENA); - else - __raw_writel(1 << gpio, bank->base - + OMAP24XX_GPIO_CLEARWKUENA); - } + _gpio_rmw(base, bank->regs->wkup_en, gpio_bit, trigger != 0); + bank->context.wake_en = + __raw_readl(bank->base + bank->regs->wkup_en); } + /* This part needs to be executed always for OMAP{34xx, 44xx} */ - if (cpu_is_omap34xx() || cpu_is_omap44xx() || - (bank->non_wakeup_gpios & gpio_bit)) { + if (!bank->regs->irqctrl) { + /* On omap24xx proceed only when valid GPIO bit is set */ + if (bank->non_wakeup_gpios) { + if (!(bank->non_wakeup_gpios & gpio_bit)) + goto exit; + } + /* * Log the edge gpio and manually trigger the IRQ * after resume if the input level changes @@ -264,17 +287,11 @@ static inline void set_24xx_gpio_triggering(struct gpio_bank *bank, int gpio, bank->enabled_non_wakeup_gpios &= ~gpio_bit; } - if (cpu_is_omap44xx()) { - bank->level_mask = - __raw_readl(bank->base + OMAP4_GPIO_LEVELDETECT0) | - __raw_readl(bank->base + OMAP4_GPIO_LEVELDETECT1); - } else { - bank->level_mask = - __raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT0) | - __raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT1); - } +exit: + bank->level_mask = + __raw_readl(bank->base + bank->regs->leveldetect0) | + __raw_readl(bank->base + bank->regs->leveldetect1); } -#endif #ifdef CONFIG_ARCH_OMAP1 /* @@ -286,23 +303,10 @@ static void _toggle_gpio_edge_triggering(struct gpio_bank *bank, int gpio) void __iomem *reg = bank->base; u32 l = 0; - switch (bank->method) { - case METHOD_MPUIO: - reg += OMAP_MPUIO_GPIO_INT_EDGE / bank->stride; - break; -#ifdef CONFIG_ARCH_OMAP15XX - case METHOD_GPIO_1510: - reg += OMAP1510_GPIO_INT_CONTROL; - break; -#endif -#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) - case METHOD_GPIO_7XX: - reg += OMAP7XX_GPIO_INT_CONTROL; - break; -#endif - default: + if (!bank->regs->irqctrl) return; - } + + reg += bank->regs->irqctrl; l = __raw_readl(reg); if ((l >> gpio) & 1) @@ -312,31 +316,21 @@ static void _toggle_gpio_edge_triggering(struct gpio_bank *bank, int gpio) __raw_writel(l, reg); } +#else +static void _toggle_gpio_edge_triggering(struct gpio_bank *bank, int gpio) {} #endif static int _set_gpio_triggering(struct gpio_bank *bank, int gpio, int trigger) { void __iomem *reg = bank->base; + void __iomem *base = bank->base; u32 l = 0; - switch (bank->method) { -#ifdef CONFIG_ARCH_OMAP1 - case METHOD_MPUIO: - reg += OMAP_MPUIO_GPIO_INT_EDGE / bank->stride; - l = __raw_readl(reg); - if ((trigger & IRQ_TYPE_SENSE_MASK) == IRQ_TYPE_EDGE_BOTH) - bank->toggle_mask |= 1 << gpio; - if (trigger & IRQ_TYPE_EDGE_RISING) - l |= 1 << gpio; - else if (trigger & IRQ_TYPE_EDGE_FALLING) - l &= ~(1 << gpio); - else - goto bad; - break; -#endif -#ifdef CONFIG_ARCH_OMAP15XX - case METHOD_GPIO_1510: - reg += OMAP1510_GPIO_INT_CONTROL; + if (bank->regs->leveldetect0 && bank->regs->wkup_en) { + set_gpio_trigger(bank, gpio, trigger); + } else if (bank->regs->irqctrl) { + reg += bank->regs->irqctrl; + l = __raw_readl(reg); if ((trigger & IRQ_TYPE_SENSE_MASK) == IRQ_TYPE_EDGE_BOTH) bank->toggle_mask |= 1 << gpio; @@ -345,15 +339,15 @@ static int _set_gpio_triggering(struct gpio_bank *bank, int gpio, int trigger) else if (trigger & IRQ_TYPE_EDGE_FALLING) l &= ~(1 << gpio); else - goto bad; - break; -#endif -#ifdef CONFIG_ARCH_OMAP16XX - case METHOD_GPIO_1610: + return -EINVAL; + + __raw_writel(l, reg); + } else if (bank->regs->edgectrl1) { if (gpio & 0x08) - reg += OMAP1610_GPIO_EDGE_CTRL2; + reg += bank->regs->edgectrl2; else - reg += OMAP1610_GPIO_EDGE_CTRL1; + reg += bank->regs->edgectrl1; + gpio &= 0x07; l = __raw_readl(reg); l &= ~(3 << (gpio << 1)); @@ -361,40 +355,14 @@ static int _set_gpio_triggering(struct gpio_bank *bank, int gpio, int trigger) l |= 2 << (gpio << 1); if (trigger & IRQ_TYPE_EDGE_FALLING) l |= 1 << (gpio << 1); - if (trigger) - /* Enable wake-up during idle for dynamic tick */ - __raw_writel(1 << gpio, bank->base + OMAP1610_GPIO_SET_WAKEUPENA); - else - __raw_writel(1 << gpio, bank->base + OMAP1610_GPIO_CLEAR_WAKEUPENA); - break; -#endif -#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) - case METHOD_GPIO_7XX: - reg += OMAP7XX_GPIO_INT_CONTROL; - l = __raw_readl(reg); - if ((trigger & IRQ_TYPE_SENSE_MASK) == IRQ_TYPE_EDGE_BOTH) - bank->toggle_mask |= 1 << gpio; - if (trigger & IRQ_TYPE_EDGE_RISING) - l |= 1 << gpio; - else if (trigger & IRQ_TYPE_EDGE_FALLING) - l &= ~(1 << gpio); - else - goto bad; - break; -#endif -#ifdef CONFIG_ARCH_OMAP2PLUS - case METHOD_GPIO_24XX: - case METHOD_GPIO_44XX: - set_24xx_gpio_triggering(bank, gpio, trigger); - return 0; -#endif - default: - goto bad; + + /* Enable wake-up during idle for dynamic tick */ + _gpio_rmw(base, bank->regs->wkup_en, 1 << gpio, trigger); + bank->context.wake_en = + __raw_readl(bank->base + bank->regs->wkup_en); + __raw_writel(l, reg); } - __raw_writel(l, reg); return 0; -bad: - return -EINVAL; } static int gpio_irq_type(struct irq_data *d, unsigned type) @@ -412,12 +380,12 @@ static int gpio_irq_type(struct irq_data *d, unsigned type) if (type & ~IRQ_TYPE_SENSE_MASK) return -EINVAL; - /* OMAP1 allows only only edge triggering */ - if (!cpu_class_is_omap2() - && (type & (IRQ_TYPE_LEVEL_LOW|IRQ_TYPE_LEVEL_HIGH))) + bank = irq_data_get_irq_chip_data(d); + + if (!bank->regs->leveldetect0 && + (type & (IRQ_TYPE_LEVEL_LOW|IRQ_TYPE_LEVEL_HIGH))) return -EINVAL; - bank = irq_data_get_irq_chip_data(d); spin_lock_irqsave(&bank->lock, flags); retval = _set_gpio_triggering(bank, GPIO_INDEX(bank, gpio), type); spin_unlock_irqrestore(&bank->lock, flags); @@ -484,6 +452,7 @@ static void _enable_gpio_irqbank(struct gpio_bank *bank, int gpio_mask) } __raw_writel(l, reg); + bank->context.irqenable1 = l; } static void _disable_gpio_irqbank(struct gpio_bank *bank, int gpio_mask) @@ -504,6 +473,7 @@ static void _disable_gpio_irqbank(struct gpio_bank *bank, int gpio_mask) } __raw_writel(l, reg); + bank->context.irqenable1 = l; } static inline void _set_gpio_irqenable(struct gpio_bank *bank, int gpio, int enable) @@ -567,38 +537,39 @@ static int omap_gpio_request(struct gpio_chip *chip, unsigned offset) struct gpio_bank *bank = container_of(chip, struct gpio_bank, chip); unsigned long flags; - spin_lock_irqsave(&bank->lock, flags); + /* + * If this is the first gpio_request for the bank, + * enable the bank module. + */ + if (!bank->mod_usage) + pm_runtime_get_sync(bank->dev); + spin_lock_irqsave(&bank->lock, flags); /* Set trigger to none. You need to enable the desired trigger with * request_irq() or set_irq_type(). */ _set_gpio_triggering(bank, offset, IRQ_TYPE_NONE); -#ifdef CONFIG_ARCH_OMAP15XX - if (bank->method == METHOD_GPIO_1510) { - void __iomem *reg; + if (bank->regs->pinctrl) { + void __iomem *reg = bank->base + bank->regs->pinctrl; /* Claim the pin for MPU */ - reg = bank->base + OMAP1510_GPIO_PIN_CONTROL; __raw_writel(__raw_readl(reg) | (1 << offset), reg); } -#endif - if (!cpu_class_is_omap1()) { - if (!bank->mod_usage) { - void __iomem *reg = bank->base; - u32 ctrl; - - if (cpu_is_omap24xx() || cpu_is_omap34xx()) - reg += OMAP24XX_GPIO_CTRL; - else if (cpu_is_omap44xx()) - reg += OMAP4_GPIO_CTRL; - ctrl = __raw_readl(reg); - /* Module is enabled, clocks are not gated */ - ctrl &= 0xFFFFFFFE; - __raw_writel(ctrl, reg); - } - bank->mod_usage |= 1 << offset; + + if (bank->regs->ctrl && !bank->mod_usage) { + void __iomem *reg = bank->base + bank->regs->ctrl; + u32 ctrl; + + ctrl = __raw_readl(reg); + /* Module is enabled, clocks are not gated */ + ctrl &= ~GPIO_MOD_CTRL_BIT; + __raw_writel(ctrl, reg); + bank->context.ctrl = ctrl; } + + bank->mod_usage |= 1 << offset; + spin_unlock_irqrestore(&bank->lock, flags); return 0; @@ -607,48 +578,40 @@ static int omap_gpio_request(struct gpio_chip *chip, unsigned offset) static void omap_gpio_free(struct gpio_chip *chip, unsigned offset) { struct gpio_bank *bank = container_of(chip, struct gpio_bank, chip); + void __iomem *base = bank->base; unsigned long flags; spin_lock_irqsave(&bank->lock, flags); -#ifdef CONFIG_ARCH_OMAP16XX - if (bank->method == METHOD_GPIO_1610) { - /* Disable wake-up during idle for dynamic tick */ - void __iomem *reg = bank->base + OMAP1610_GPIO_CLEAR_WAKEUPENA; - __raw_writel(1 << offset, reg); - } -#endif -#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) - if (bank->method == METHOD_GPIO_24XX) { - /* Disable wake-up during idle for dynamic tick */ - void __iomem *reg = bank->base + OMAP24XX_GPIO_CLEARWKUENA; - __raw_writel(1 << offset, reg); - } -#endif -#ifdef CONFIG_ARCH_OMAP4 - if (bank->method == METHOD_GPIO_44XX) { + + if (bank->regs->wkup_en) { /* Disable wake-up during idle for dynamic tick */ - void __iomem *reg = bank->base + OMAP4_GPIO_IRQWAKEN0; - __raw_writel(1 << offset, reg); + _gpio_rmw(base, bank->regs->wkup_en, 1 << offset, 0); + bank->context.wake_en = + __raw_readl(bank->base + bank->regs->wkup_en); } -#endif - if (!cpu_class_is_omap1()) { - bank->mod_usage &= ~(1 << offset); - if (!bank->mod_usage) { - void __iomem *reg = bank->base; - u32 ctrl; - - if (cpu_is_omap24xx() || cpu_is_omap34xx()) - reg += OMAP24XX_GPIO_CTRL; - else if (cpu_is_omap44xx()) - reg += OMAP4_GPIO_CTRL; - ctrl = __raw_readl(reg); - /* Module is disabled, clocks are gated */ - ctrl |= 1; - __raw_writel(ctrl, reg); - } + + bank->mod_usage &= ~(1 << offset); + + if (bank->regs->ctrl && !bank->mod_usage) { + void __iomem *reg = bank->base + bank->regs->ctrl; + u32 ctrl; + + ctrl = __raw_readl(reg); + /* Module is disabled, clocks are gated */ + ctrl |= GPIO_MOD_CTRL_BIT; + __raw_writel(ctrl, reg); + bank->context.ctrl = ctrl; } + _reset_gpio(bank, bank->chip.base + offset); spin_unlock_irqrestore(&bank->lock, flags); + + /* + * If this is the last gpio to be freed in the bank, + * disable the bank module. + */ + if (!bank->mod_usage) + pm_runtime_put(bank->dev); } /* @@ -674,6 +637,7 @@ static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc) bank = irq_get_handler_data(irq); isr_reg = bank->base + bank->regs->irqstatus; + pm_runtime_get_sync(bank->dev); if (WARN_ON(!isr_reg)) goto exit; @@ -685,12 +649,8 @@ static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc) enabled = _get_gpio_irqbank_mask(bank); isr_saved = isr = __raw_readl(isr_reg) & enabled; - if (cpu_is_omap15xx() && (bank->method == METHOD_MPUIO)) - isr &= 0x0000ffff; - - if (cpu_class_is_omap2()) { + if (bank->level_mask) level_mask = bank->level_mask & enabled; - } /* clear edge sensitive interrupts before handler(s) are called so that we don't miss any interrupt occurred while @@ -718,7 +678,6 @@ static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc) if (!(isr & 1)) continue; -#ifdef CONFIG_ARCH_OMAP1 /* * Some chips can't respond to both rising and falling * at the same time. If this irq was requested with @@ -728,7 +687,6 @@ static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc) */ if (bank->toggle_mask & (1 << gpio_index)) _toggle_gpio_edge_triggering(bank, gpio_index); -#endif generic_handle_irq(gpio_irq); } @@ -740,6 +698,7 @@ static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc) exit: if (!unmasked) chained_irq_exit(chip, desc); + pm_runtime_put(bank->dev); } static void gpio_irq_shutdown(struct irq_data *d) @@ -808,14 +767,6 @@ static struct irq_chip gpio_irq_chip = { /*---------------------------------------------------------------------*/ -#ifdef CONFIG_ARCH_OMAP1 - -#define bank_is_mpuio(bank) ((bank)->method == METHOD_MPUIO) - -#ifdef CONFIG_ARCH_OMAP16XX - -#include <linux/platform_device.h> - static int omap_mpuio_suspend_noirq(struct device *dev) { struct platform_device *pdev = to_platform_device(dev); @@ -869,32 +820,16 @@ static struct platform_device omap_mpuio_device = { /* could list the /proc/iomem resources */ }; -static inline void mpuio_init(void) +static inline void mpuio_init(struct gpio_bank *bank) { - struct gpio_bank *bank = &gpio_bank[0]; platform_set_drvdata(&omap_mpuio_device, bank); if (platform_driver_register(&omap_mpuio_driver) == 0) (void) platform_device_register(&omap_mpuio_device); } -#else -static inline void mpuio_init(void) {} -#endif /* 16xx */ - -#else - -#define bank_is_mpuio(bank) 0 -static inline void mpuio_init(void) {} - -#endif - /*---------------------------------------------------------------------*/ -/* REVISIT these are stupid implementations! replace by ones that - * don't switch on METHOD_* and which mostly avoid spinlocks - */ - static int gpio_input(struct gpio_chip *chip, unsigned offset) { struct gpio_bank *bank; @@ -1007,71 +942,32 @@ static void __init omap_gpio_show_rev(struct gpio_bank *bank) */ static struct lock_class_key gpio_lock_class; -static inline int init_gpio_info(struct platform_device *pdev) +static void omap_gpio_mod_init(struct gpio_bank *bank) { - /* TODO: Analyze removing gpio_bank_count usage from driver code */ - gpio_bank = kzalloc(gpio_bank_count * sizeof(struct gpio_bank), - GFP_KERNEL); - if (!gpio_bank) { - dev_err(&pdev->dev, "Memory alloc failed for gpio_bank\n"); - return -ENOMEM; - } - return 0; -} + void __iomem *base = bank->base; + u32 l = 0xffffffff; -/* TODO: Cleanup cpu_is_* checks */ -static void omap_gpio_mod_init(struct gpio_bank *bank, int id) -{ - if (cpu_class_is_omap2()) { - if (cpu_is_omap44xx()) { - __raw_writel(0xffffffff, bank->base + - OMAP4_GPIO_IRQSTATUSCLR0); - __raw_writel(0x00000000, bank->base + - OMAP4_GPIO_DEBOUNCENABLE); - /* Initialize interface clk ungated, module enabled */ - __raw_writel(0, bank->base + OMAP4_GPIO_CTRL); - } else if (cpu_is_omap34xx()) { - __raw_writel(0x00000000, bank->base + - OMAP24XX_GPIO_IRQENABLE1); - __raw_writel(0xffffffff, bank->base + - OMAP24XX_GPIO_IRQSTATUS1); - __raw_writel(0x00000000, bank->base + - OMAP24XX_GPIO_DEBOUNCE_EN); - - /* Initialize interface clk ungated, module enabled */ - __raw_writel(0, bank->base + OMAP24XX_GPIO_CTRL); - } else if (cpu_is_omap24xx()) { - static const u32 non_wakeup_gpios[] = { - 0xe203ffc0, 0x08700040 - }; - if (id < ARRAY_SIZE(non_wakeup_gpios)) - bank->non_wakeup_gpios = non_wakeup_gpios[id]; - } - } else if (cpu_class_is_omap1()) { - if (bank_is_mpuio(bank)) - __raw_writew(0xffff, bank->base + - OMAP_MPUIO_GPIO_MASKIT / bank->stride); - if (cpu_is_omap15xx() && bank->method == METHOD_GPIO_1510) { - __raw_writew(0xffff, bank->base - + OMAP1510_GPIO_INT_MASK); - __raw_writew(0x0000, bank->base - + OMAP1510_GPIO_INT_STATUS); - } - if (cpu_is_omap16xx() && bank->method == METHOD_GPIO_1610) { - __raw_writew(0x0000, bank->base - + OMAP1610_GPIO_IRQENABLE1); - __raw_writew(0xffff, bank->base - + OMAP1610_GPIO_IRQSTATUS1); - __raw_writew(0x0014, bank->base - + OMAP1610_GPIO_SYSCONFIG); - } - if (cpu_is_omap7xx() && bank->method == METHOD_GPIO_7XX) { - __raw_writel(0xffffffff, bank->base - + OMAP7XX_GPIO_INT_MASK); - __raw_writel(0x00000000, bank->base - + OMAP7XX_GPIO_INT_STATUS); - } + if (bank->width == 16) + l = 0xffff; + + if (bank->is_mpuio) { + __raw_writel(l, bank->base + bank->regs->irqenable); + return; } + + _gpio_rmw(base, bank->regs->irqenable, l, bank->regs->irqenable_inv); + _gpio_rmw(base, bank->regs->irqstatus, l, + bank->regs->irqenable_inv == false); + _gpio_rmw(base, bank->regs->irqenable, l, bank->regs->debounce_en != 0); + _gpio_rmw(base, bank->regs->irqenable, l, bank->regs->ctrl != 0); + if (bank->regs->debounce_en) + _gpio_rmw(base, bank->regs->debounce_en, 0, 1); + + /* Save OE default value (0xffffffff) in the context */ + bank->context.oe = __raw_readl(bank->base + bank->regs->direction); + /* Initialize interface clk ungated, module enabled */ + if (bank->regs->ctrl) + _gpio_rmw(base, bank->regs->ctrl, 0, 1); } static __init void @@ -1094,8 +990,8 @@ omap_mpuio_alloc_gc(struct gpio_bank *bank, unsigned int irq_start, ct->chip.irq_mask = irq_gc_mask_set_bit; ct->chip.irq_unmask = irq_gc_mask_clr_bit; ct->chip.irq_set_type = gpio_irq_type; - /* REVISIT: assuming only 16xx supports MPUIO wake events */ - if (cpu_is_omap16xx()) + + if (bank->regs->wkup_en) ct->chip.irq_set_wake = gpio_wake_enable, ct->regs.mask = OMAP_MPUIO_GPIO_INT / bank->stride; @@ -1108,7 +1004,6 @@ static void __devinit omap_gpio_chip_init(struct gpio_bank *bank) int j; static int gpio; - bank->mod_usage = 0; /* * REVISIT eventually switch from OMAP-specific gpio structs * over to the generic ones @@ -1121,11 +1016,10 @@ static void __devinit omap_gpio_chip_init(struct gpio_bank *bank) bank->chip.set_debounce = gpio_debounce; bank->chip.set = gpio_set; bank->chip.to_irq = gpio_2irq; - if (bank_is_mpuio(bank)) { + if (bank->is_mpuio) { bank->chip.label = "mpuio"; -#ifdef CONFIG_ARCH_OMAP16XX - bank->chip.dev = &omap_mpuio_device.dev; -#endif + if (bank->regs->wkup_en) + bank->chip.dev = &omap_mpuio_device.dev; bank->chip.base = OMAP_MPUIO(0); } else { bank->chip.label = "gpio"; @@ -1140,7 +1034,7 @@ static void __devinit omap_gpio_chip_init(struct gpio_bank *bank) j < bank->virtual_irq_start + bank->width; j++) { irq_set_lockdep_class(j, &gpio_lock_class); irq_set_chip_data(j, bank); - if (bank_is_mpuio(bank)) { + if (bank->is_mpuio) { omap_mpuio_alloc_gc(bank, j, bank->width); } else { irq_set_chip(j, &gpio_irq_chip); @@ -1154,42 +1048,44 @@ static void __devinit omap_gpio_chip_init(struct gpio_bank *bank) static int __devinit omap_gpio_probe(struct platform_device *pdev) { - static int gpio_init_done; struct omap_gpio_platform_data *pdata; struct resource *res; - int id; struct gpio_bank *bank; + int ret = 0; - if (!pdev->dev.platform_data) - return -EINVAL; - - pdata = pdev->dev.platform_data; - - if (!gpio_init_done) { - int ret; - - ret = init_gpio_info(pdev); - if (ret) - return ret; + if (!pdev->dev.platform_data) { + ret = -EINVAL; + goto err_exit; } - id = pdev->id; - bank = &gpio_bank[id]; + bank = kzalloc(sizeof(struct gpio_bank), GFP_KERNEL); + if (!bank) { + dev_err(&pdev->dev, "Memory alloc failed for gpio_bank\n"); + ret = -ENOMEM; + goto err_exit; + } res = platform_get_resource(pdev, IORESOURCE_IRQ, 0); if (unlikely(!res)) { - dev_err(&pdev->dev, "GPIO Bank %i Invalid IRQ resource\n", id); - return -ENODEV; + dev_err(&pdev->dev, "GPIO Bank %i Invalid IRQ resource\n", + pdev->id); + ret = -ENODEV; + goto err_free; } bank->irq = res->start; + bank->id = pdev->id; + + pdata = pdev->dev.platform_data; bank->virtual_irq_start = pdata->virtual_irq_start; - bank->method = pdata->bank_type; bank->dev = &pdev->dev; bank->dbck_flag = pdata->dbck_flag; bank->stride = pdata->bank_stride; bank->width = pdata->bank_width; - + bank->is_mpuio = pdata->is_mpuio; + bank->non_wakeup_gpios = pdata->non_wakeup_gpios; + bank->loses_context = pdata->loses_context; + bank->get_context_loss_count = pdata->get_context_loss_count; bank->regs = pdata->regs; if (bank->regs->set_dataout && bank->regs->clr_dataout) @@ -1202,369 +1098,310 @@ static int __devinit omap_gpio_probe(struct platform_device *pdev) /* Static mapping, never released */ res = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (unlikely(!res)) { - dev_err(&pdev->dev, "GPIO Bank %i Invalid mem resource\n", id); - return -ENODEV; + dev_err(&pdev->dev, "GPIO Bank %i Invalid mem resource\n", + pdev->id); + ret = -ENODEV; + goto err_free; } bank->base = ioremap(res->start, resource_size(res)); if (!bank->base) { - dev_err(&pdev->dev, "Could not ioremap gpio bank%i\n", id); - return -ENOMEM; + dev_err(&pdev->dev, "Could not ioremap gpio bank%i\n", + pdev->id); + ret = -ENOMEM; + goto err_free; } + platform_set_drvdata(pdev, bank); + pm_runtime_enable(bank->dev); + pm_runtime_irq_safe(bank->dev); pm_runtime_get_sync(bank->dev); - omap_gpio_mod_init(bank, id); + if (bank->is_mpuio) + mpuio_init(bank); + + omap_gpio_mod_init(bank); omap_gpio_chip_init(bank); omap_gpio_show_rev(bank); - if (!gpio_init_done) - gpio_init_done = 1; + pm_runtime_put(bank->dev); - return 0; + list_add_tail(&bank->node, &omap_gpio_list); + + return ret; + +err_free: + kfree(bank); +err_exit: + return ret; } -#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP2PLUS) -static int omap_gpio_suspend(void) +#ifdef CONFIG_ARCH_OMAP2PLUS + +#if defined(CONFIG_PM_SLEEP) +static int omap_gpio_suspend(struct device *dev) { - int i; + struct platform_device *pdev = to_platform_device(dev); + struct gpio_bank *bank = platform_get_drvdata(pdev); + void __iomem *base = bank->base; + void __iomem *wakeup_enable; + unsigned long flags; - if (!cpu_class_is_omap2() && !cpu_is_omap16xx()) + if (!bank->mod_usage || !bank->loses_context) return 0; - for (i = 0; i < gpio_bank_count; i++) { - struct gpio_bank *bank = &gpio_bank[i]; - void __iomem *wake_status; - void __iomem *wake_clear; - void __iomem *wake_set; - unsigned long flags; - - switch (bank->method) { -#ifdef CONFIG_ARCH_OMAP16XX - case METHOD_GPIO_1610: - wake_status = bank->base + OMAP1610_GPIO_WAKEUPENABLE; - wake_clear = bank->base + OMAP1610_GPIO_CLEAR_WAKEUPENA; - wake_set = bank->base + OMAP1610_GPIO_SET_WAKEUPENA; - break; -#endif -#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) - case METHOD_GPIO_24XX: - wake_status = bank->base + OMAP24XX_GPIO_WAKE_EN; - wake_clear = bank->base + OMAP24XX_GPIO_CLEARWKUENA; - wake_set = bank->base + OMAP24XX_GPIO_SETWKUENA; - break; -#endif -#ifdef CONFIG_ARCH_OMAP4 - case METHOD_GPIO_44XX: - wake_status = bank->base + OMAP4_GPIO_IRQWAKEN0; - wake_clear = bank->base + OMAP4_GPIO_IRQWAKEN0; - wake_set = bank->base + OMAP4_GPIO_IRQWAKEN0; - break; -#endif - default: - continue; - } + if (!bank->regs->wkup_en || !bank->suspend_wakeup) + return 0; - spin_lock_irqsave(&bank->lock, flags); - bank->saved_wakeup = __raw_readl(wake_status); - __raw_writel(0xffffffff, wake_clear); - __raw_writel(bank->suspend_wakeup, wake_set); - spin_unlock_irqrestore(&bank->lock, flags); - } + wakeup_enable = bank->base + bank->regs->wkup_en; + + spin_lock_irqsave(&bank->lock, flags); + bank->saved_wakeup = __raw_readl(wakeup_enable); + _gpio_rmw(base, bank->regs->wkup_en, 0xffffffff, 0); + _gpio_rmw(base, bank->regs->wkup_en, bank->suspend_wakeup, 1); + spin_unlock_irqrestore(&bank->lock, flags); return 0; } -static void omap_gpio_resume(void) +static int omap_gpio_resume(struct device *dev) { - int i; + struct platform_device *pdev = to_platform_device(dev); + struct gpio_bank *bank = platform_get_drvdata(pdev); + void __iomem *base = bank->base; + unsigned long flags; - if (!cpu_class_is_omap2() && !cpu_is_omap16xx()) - return; + if (!bank->mod_usage || !bank->loses_context) + return 0; - for (i = 0; i < gpio_bank_count; i++) { - struct gpio_bank *bank = &gpio_bank[i]; - void __iomem *wake_clear; - void __iomem *wake_set; - unsigned long flags; - - switch (bank->method) { -#ifdef CONFIG_ARCH_OMAP16XX - case METHOD_GPIO_1610: - wake_clear = bank->base + OMAP1610_GPIO_CLEAR_WAKEUPENA; - wake_set = bank->base + OMAP1610_GPIO_SET_WAKEUPENA; - break; -#endif -#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) - case METHOD_GPIO_24XX: - wake_clear = bank->base + OMAP24XX_GPIO_CLEARWKUENA; - wake_set = bank->base + OMAP24XX_GPIO_SETWKUENA; - break; -#endif -#ifdef CONFIG_ARCH_OMAP4 - case METHOD_GPIO_44XX: - wake_clear = bank->base + OMAP4_GPIO_IRQWAKEN0; - wake_set = bank->base + OMAP4_GPIO_IRQWAKEN0; - break; -#endif - default: - continue; - } + if (!bank->regs->wkup_en || !bank->saved_wakeup) + return 0; - spin_lock_irqsave(&bank->lock, flags); - __raw_writel(0xffffffff, wake_clear); - __raw_writel(bank->saved_wakeup, wake_set); - spin_unlock_irqrestore(&bank->lock, flags); - } -} + spin_lock_irqsave(&bank->lock, flags); + _gpio_rmw(base, bank->regs->wkup_en, 0xffffffff, 0); + _gpio_rmw(base, bank->regs->wkup_en, bank->saved_wakeup, 1); + spin_unlock_irqrestore(&bank->lock, flags); -static struct syscore_ops omap_gpio_syscore_ops = { - .suspend = omap_gpio_suspend, - .resume = omap_gpio_resume, -}; + return 0; +} +#endif /* CONFIG_PM_SLEEP */ -#endif +#if defined(CONFIG_PM_RUNTIME) +static void omap_gpio_restore_context(struct gpio_bank *bank); -#ifdef CONFIG_ARCH_OMAP2PLUS +static int omap_gpio_runtime_suspend(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct gpio_bank *bank = platform_get_drvdata(pdev); + u32 l1 = 0, l2 = 0; + unsigned long flags; -static int workaround_enabled; + spin_lock_irqsave(&bank->lock, flags); + if (bank->power_mode != OFF_MODE) { + bank->power_mode = 0; + goto update_gpio_context_count; + } + /* + * If going to OFF, remove triggering for all + * non-wakeup GPIOs. Otherwise spurious IRQs will be + * generated. See OMAP2420 Errata item 1.101. + */ + if (!(bank->enabled_non_wakeup_gpios)) + goto update_gpio_context_count; -void omap2_gpio_prepare_for_idle(int off_mode) -{ - int i, c = 0; - int min = 0; + bank->saved_datain = __raw_readl(bank->base + + bank->regs->datain); + l1 = __raw_readl(bank->base + bank->regs->fallingdetect); + l2 = __raw_readl(bank->base + bank->regs->risingdetect); - if (cpu_is_omap34xx()) - min = 1; + bank->saved_fallingdetect = l1; + bank->saved_risingdetect = l2; + l1 &= ~bank->enabled_non_wakeup_gpios; + l2 &= ~bank->enabled_non_wakeup_gpios; - for (i = min; i < gpio_bank_count; i++) { - struct gpio_bank *bank = &gpio_bank[i]; - u32 l1 = 0, l2 = 0; - int j; + __raw_writel(l1, bank->base + bank->regs->fallingdetect); + __raw_writel(l2, bank->base + bank->regs->risingdetect); - for (j = 0; j < hweight_long(bank->dbck_enable_mask); j++) - clk_disable(bank->dbck); + bank->workaround_enabled = true; - if (!off_mode) - continue; +update_gpio_context_count: + if (bank->get_context_loss_count) + bank->context_loss_count = + bank->get_context_loss_count(bank->dev); - /* If going to OFF, remove triggering for all - * non-wakeup GPIOs. Otherwise spurious IRQs will be - * generated. See OMAP2420 Errata item 1.101. */ - if (!(bank->enabled_non_wakeup_gpios)) - continue; + _gpio_dbck_disable(bank); + spin_unlock_irqrestore(&bank->lock, flags); - if (cpu_is_omap24xx() || cpu_is_omap34xx()) { - bank->saved_datain = __raw_readl(bank->base + - OMAP24XX_GPIO_DATAIN); - l1 = __raw_readl(bank->base + - OMAP24XX_GPIO_FALLINGDETECT); - l2 = __raw_readl(bank->base + - OMAP24XX_GPIO_RISINGDETECT); - } + return 0; +} - if (cpu_is_omap44xx()) { - bank->saved_datain = __raw_readl(bank->base + - OMAP4_GPIO_DATAIN); - l1 = __raw_readl(bank->base + - OMAP4_GPIO_FALLINGDETECT); - l2 = __raw_readl(bank->base + - OMAP4_GPIO_RISINGDETECT); - } +static int omap_gpio_runtime_resume(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct gpio_bank *bank = platform_get_drvdata(pdev); + int context_lost_cnt_after; + u32 l = 0, gen, gen0, gen1; + unsigned long flags; - bank->saved_fallingdetect = l1; - bank->saved_risingdetect = l2; - l1 &= ~bank->enabled_non_wakeup_gpios; - l2 &= ~bank->enabled_non_wakeup_gpios; + spin_lock_irqsave(&bank->lock, flags); + _gpio_dbck_enable(bank); + if (!bank->enabled_non_wakeup_gpios || !bank->workaround_enabled) { + spin_unlock_irqrestore(&bank->lock, flags); + return 0; + } - if (cpu_is_omap24xx() || cpu_is_omap34xx()) { - __raw_writel(l1, bank->base + - OMAP24XX_GPIO_FALLINGDETECT); - __raw_writel(l2, bank->base + - OMAP24XX_GPIO_RISINGDETECT); + if (bank->get_context_loss_count) { + context_lost_cnt_after = + bank->get_context_loss_count(bank->dev); + if (context_lost_cnt_after != bank->context_loss_count || + !context_lost_cnt_after) { + omap_gpio_restore_context(bank); + } else { + spin_unlock_irqrestore(&bank->lock, flags); + return 0; } + } - if (cpu_is_omap44xx()) { - __raw_writel(l1, bank->base + OMAP4_GPIO_FALLINGDETECT); - __raw_writel(l2, bank->base + OMAP4_GPIO_RISINGDETECT); - } + __raw_writel(bank->saved_fallingdetect, + bank->base + bank->regs->fallingdetect); + __raw_writel(bank->saved_risingdetect, + bank->base + bank->regs->risingdetect); + l = __raw_readl(bank->base + bank->regs->datain); - c++; - } - if (!c) { - workaround_enabled = 0; - return; - } - workaround_enabled = 1; -} + /* + * Check if any of the non-wakeup interrupt GPIOs have changed + * state. If so, generate an IRQ by software. This is + * horribly racy, but it's the best we can do to work around + * this silicon bug. + */ + l ^= bank->saved_datain; + l &= bank->enabled_non_wakeup_gpios; -void omap2_gpio_resume_after_idle(void) -{ - int i; - int min = 0; + /* + * No need to generate IRQs for the rising edge for gpio IRQs + * configured with falling edge only; and vice versa. + */ + gen0 = l & bank->saved_fallingdetect; + gen0 &= bank->saved_datain; - if (cpu_is_omap34xx()) - min = 1; - for (i = min; i < gpio_bank_count; i++) { - struct gpio_bank *bank = &gpio_bank[i]; - u32 l = 0, gen, gen0, gen1; - int j; + gen1 = l & bank->saved_risingdetect; + gen1 &= ~(bank->saved_datain); - for (j = 0; j < hweight_long(bank->dbck_enable_mask); j++) - clk_enable(bank->dbck); + /* FIXME: Consider GPIO IRQs with level detections properly! */ + gen = l & (~(bank->saved_fallingdetect) & ~(bank->saved_risingdetect)); + /* Consider all GPIO IRQs needed to be updated */ + gen |= gen0 | gen1; - if (!workaround_enabled) - continue; + if (gen) { + u32 old0, old1; - if (!(bank->enabled_non_wakeup_gpios)) - continue; + old0 = __raw_readl(bank->base + bank->regs->leveldetect0); + old1 = __raw_readl(bank->base + bank->regs->leveldetect1); if (cpu_is_omap24xx() || cpu_is_omap34xx()) { - __raw_writel(bank->saved_fallingdetect, - bank->base + OMAP24XX_GPIO_FALLINGDETECT); - __raw_writel(bank->saved_risingdetect, - bank->base + OMAP24XX_GPIO_RISINGDETECT); - l = __raw_readl(bank->base + OMAP24XX_GPIO_DATAIN); + __raw_writel(old0 | gen, bank->base + + bank->regs->leveldetect0); + __raw_writel(old1 | gen, bank->base + + bank->regs->leveldetect1); } if (cpu_is_omap44xx()) { - __raw_writel(bank->saved_fallingdetect, - bank->base + OMAP4_GPIO_FALLINGDETECT); - __raw_writel(bank->saved_risingdetect, - bank->base + OMAP4_GPIO_RISINGDETECT); - l = __raw_readl(bank->base + OMAP4_GPIO_DATAIN); - } - - /* Check if any of the non-wakeup interrupt GPIOs have changed - * state. If so, generate an IRQ by software. This is - * horribly racy, but it's the best we can do to work around - * this silicon bug. */ - l ^= bank->saved_datain; - l &= bank->enabled_non_wakeup_gpios; - - /* - * No need to generate IRQs for the rising edge for gpio IRQs - * configured with falling edge only; and vice versa. - */ - gen0 = l & bank->saved_fallingdetect; - gen0 &= bank->saved_datain; - - gen1 = l & bank->saved_risingdetect; - gen1 &= ~(bank->saved_datain); - - /* FIXME: Consider GPIO IRQs with level detections properly! */ - gen = l & (~(bank->saved_fallingdetect) & - ~(bank->saved_risingdetect)); - /* Consider all GPIO IRQs needed to be updated */ - gen |= gen0 | gen1; - - if (gen) { - u32 old0, old1; - - if (cpu_is_omap24xx() || cpu_is_omap34xx()) { - old0 = __raw_readl(bank->base + - OMAP24XX_GPIO_LEVELDETECT0); - old1 = __raw_readl(bank->base + - OMAP24XX_GPIO_LEVELDETECT1); - __raw_writel(old0 | gen, bank->base + - OMAP24XX_GPIO_LEVELDETECT0); - __raw_writel(old1 | gen, bank->base + - OMAP24XX_GPIO_LEVELDETECT1); - __raw_writel(old0, bank->base + - OMAP24XX_GPIO_LEVELDETECT0); - __raw_writel(old1, bank->base + - OMAP24XX_GPIO_LEVELDETECT1); - } - - if (cpu_is_omap44xx()) { - old0 = __raw_readl(bank->base + - OMAP4_GPIO_LEVELDETECT0); - old1 = __raw_readl(bank->base + - OMAP4_GPIO_LEVELDETECT1); - __raw_writel(old0 | l, bank->base + - OMAP4_GPIO_LEVELDETECT0); - __raw_writel(old1 | l, bank->base + - OMAP4_GPIO_LEVELDETECT1); - __raw_writel(old0, bank->base + - OMAP4_GPIO_LEVELDETECT0); - __raw_writel(old1, bank->base + - OMAP4_GPIO_LEVELDETECT1); - } + __raw_writel(old0 | l, bank->base + + bank->regs->leveldetect0); + __raw_writel(old1 | l, bank->base + + bank->regs->leveldetect1); } + __raw_writel(old0, bank->base + bank->regs->leveldetect0); + __raw_writel(old1, bank->base + bank->regs->leveldetect1); } + bank->workaround_enabled = false; + spin_unlock_irqrestore(&bank->lock, flags); + + return 0; } +#endif /* CONFIG_PM_RUNTIME */ -#endif +void omap2_gpio_prepare_for_idle(int pwr_mode) +{ + struct gpio_bank *bank; + + list_for_each_entry(bank, &omap_gpio_list, node) { + if (!bank->mod_usage || !bank->loses_context) + continue; + + bank->power_mode = pwr_mode; + + pm_runtime_put_sync_suspend(bank->dev); + } +} -#ifdef CONFIG_ARCH_OMAP3 -/* save the registers of bank 2-6 */ -void omap_gpio_save_context(void) +void omap2_gpio_resume_after_idle(void) { - int i; - - /* saving banks from 2-6 only since GPIO1 is in WKUP */ - for (i = 1; i < gpio_bank_count; i++) { - struct gpio_bank *bank = &gpio_bank[i]; - gpio_context[i].irqenable1 = - __raw_readl(bank->base + OMAP24XX_GPIO_IRQENABLE1); - gpio_context[i].irqenable2 = - __raw_readl(bank->base + OMAP24XX_GPIO_IRQENABLE2); - gpio_context[i].wake_en = - __raw_readl(bank->base + OMAP24XX_GPIO_WAKE_EN); - gpio_context[i].ctrl = - __raw_readl(bank->base + OMAP24XX_GPIO_CTRL); - gpio_context[i].oe = - __raw_readl(bank->base + OMAP24XX_GPIO_OE); - gpio_context[i].leveldetect0 = - __raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT0); - gpio_context[i].leveldetect1 = - __raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT1); - gpio_context[i].risingdetect = - __raw_readl(bank->base + OMAP24XX_GPIO_RISINGDETECT); - gpio_context[i].fallingdetect = - __raw_readl(bank->base + OMAP24XX_GPIO_FALLINGDETECT); - gpio_context[i].dataout = - __raw_readl(bank->base + OMAP24XX_GPIO_DATAOUT); + struct gpio_bank *bank; + + list_for_each_entry(bank, &omap_gpio_list, node) { + if (!bank->mod_usage || !bank->loses_context) + continue; + + pm_runtime_get_sync(bank->dev); } } -/* restore the required registers of bank 2-6 */ -void omap_gpio_restore_context(void) +#if defined(CONFIG_PM_RUNTIME) +static void omap_gpio_restore_context(struct gpio_bank *bank) { - int i; - - for (i = 1; i < gpio_bank_count; i++) { - struct gpio_bank *bank = &gpio_bank[i]; - __raw_writel(gpio_context[i].irqenable1, - bank->base + OMAP24XX_GPIO_IRQENABLE1); - __raw_writel(gpio_context[i].irqenable2, - bank->base + OMAP24XX_GPIO_IRQENABLE2); - __raw_writel(gpio_context[i].wake_en, - bank->base + OMAP24XX_GPIO_WAKE_EN); - __raw_writel(gpio_context[i].ctrl, - bank->base + OMAP24XX_GPIO_CTRL); - __raw_writel(gpio_context[i].oe, - bank->base + OMAP24XX_GPIO_OE); - __raw_writel(gpio_context[i].leveldetect0, - bank->base + OMAP24XX_GPIO_LEVELDETECT0); - __raw_writel(gpio_context[i].leveldetect1, - bank->base + OMAP24XX_GPIO_LEVELDETECT1); - __raw_writel(gpio_context[i].risingdetect, - bank->base + OMAP24XX_GPIO_RISINGDETECT); - __raw_writel(gpio_context[i].fallingdetect, - bank->base + OMAP24XX_GPIO_FALLINGDETECT); - __raw_writel(gpio_context[i].dataout, - bank->base + OMAP24XX_GPIO_DATAOUT); + __raw_writel(bank->context.wake_en, + bank->base + bank->regs->wkup_en); + __raw_writel(bank->context.ctrl, bank->base + bank->regs->ctrl); + __raw_writel(bank->context.leveldetect0, + bank->base + bank->regs->leveldetect0); + __raw_writel(bank->context.leveldetect1, + bank->base + bank->regs->leveldetect1); + __raw_writel(bank->context.risingdetect, + bank->base + bank->regs->risingdetect); + __raw_writel(bank->context.fallingdetect, + bank->base + bank->regs->fallingdetect); + if (bank->regs->set_dataout && bank->regs->clr_dataout) + __raw_writel(bank->context.dataout, + bank->base + bank->regs->set_dataout); + else + __raw_writel(bank->context.dataout, + bank->base + bank->regs->dataout); + __raw_writel(bank->context.oe, bank->base + bank->regs->direction); + + if (bank->dbck_enable_mask) { + __raw_writel(bank->context.debounce, bank->base + + bank->regs->debounce); + __raw_writel(bank->context.debounce_en, + bank->base + bank->regs->debounce_en); } + + __raw_writel(bank->context.irqenable1, + bank->base + bank->regs->irqenable); + __raw_writel(bank->context.irqenable2, + bank->base + bank->regs->irqenable2); } +#endif /* CONFIG_PM_RUNTIME */ +#else +#define omap_gpio_suspend NULL +#define omap_gpio_resume NULL +#define omap_gpio_runtime_suspend NULL +#define omap_gpio_runtime_resume NULL #endif +static const struct dev_pm_ops gpio_pm_ops = { + SET_SYSTEM_SLEEP_PM_OPS(omap_gpio_suspend, omap_gpio_resume) + SET_RUNTIME_PM_OPS(omap_gpio_runtime_suspend, omap_gpio_runtime_resume, + NULL) +}; + static struct platform_driver omap_gpio_driver = { .probe = omap_gpio_probe, .driver = { .name = "omap_gpio", + .pm = &gpio_pm_ops, }, }; @@ -1578,17 +1415,3 @@ static int __init omap_gpio_drv_reg(void) return platform_driver_register(&omap_gpio_driver); } postcore_initcall(omap_gpio_drv_reg); - -static int __init omap_gpio_sysinit(void) -{ - mpuio_init(); - -#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP2PLUS) - if (cpu_is_omap16xx() || cpu_class_is_omap2()) - register_syscore_ops(&omap_gpio_syscore_ops); -#endif - - return 0; -} - -arch_initcall(omap_gpio_sysinit); |