summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2012-08-17 11:12:28 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2012-08-17 11:12:28 -0700
commit225a389b31b0e3a57dda64055d5e25f93e5c76ac (patch)
tree9ac21d481ac11f29be055a0b5513c525574ef8a5
parent557e2e2eef90d7d3d4ee5396c1ecee873c3dd46e (diff)
parent38f8eefccf3a23c4058a570fa2938a4f553cf8e0 (diff)
Merge tag 'tty-3.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull TTY fixes from Greg Kroah-Hartman: "Here are 4 tiny patches, each fixing a serial driver problem that people have reported. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>" * tag 'tty-3.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: pmac_zilog,kdb: Fix console poll hook to return instead of loop serial: mxs-auart: fix the wrong RTS hardware flow control serial: ifx6x60: fix paging fault on spi_register_driver serial: Change Kconfig entry for CLPS711X-target
-rw-r--r--drivers/tty/serial/Kconfig10
-rw-r--r--drivers/tty/serial/ifx6x60.c2
-rw-r--r--drivers/tty/serial/mxs-auart.c14
-rw-r--r--drivers/tty/serial/pmac_zilog.c12
4 files changed, 24 insertions, 14 deletions
diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index 070b442c1f8..4720b4ba096 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -160,10 +160,12 @@ config SERIAL_KS8695_CONSOLE
config SERIAL_CLPS711X
tristate "CLPS711X serial port support"
- depends on ARM && ARCH_CLPS711X
+ depends on ARCH_CLPS711X
select SERIAL_CORE
+ default y
help
- ::: To be written :::
+ This enables the driver for the on-chip UARTs of the Cirrus
+ Logic EP711x/EP721x/EP731x processors.
config SERIAL_CLPS711X_CONSOLE
bool "Support for console on CLPS711X serial port"
@@ -173,9 +175,7 @@ config SERIAL_CLPS711X_CONSOLE
Even if you say Y here, the currently visible virtual console
(/dev/tty0) will still be used as the system console by default, but
you can alter that using a kernel command line option such as
- "console=ttyCL1". (Try "man bootparam" or see the documentation of
- your boot loader (lilo or loadlin) about how to pass options to the
- kernel at boot time.)
+ "console=ttyCL1".
config SERIAL_SAMSUNG
tristate "Samsung SoC serial support"
diff --git a/drivers/tty/serial/ifx6x60.c b/drivers/tty/serial/ifx6x60.c
index 144cd3987d4..3ad079ffd04 100644
--- a/drivers/tty/serial/ifx6x60.c
+++ b/drivers/tty/serial/ifx6x60.c
@@ -1331,7 +1331,7 @@ static const struct spi_device_id ifx_id_table[] = {
MODULE_DEVICE_TABLE(spi, ifx_id_table);
/* spi operations */
-static const struct spi_driver ifx_spi_driver = {
+static struct spi_driver ifx_spi_driver = {
.driver = {
.name = DRVNAME,
.pm = &ifx_spi_pm,
diff --git a/drivers/tty/serial/mxs-auart.c b/drivers/tty/serial/mxs-auart.c
index 2e341b81ff8..3a667eed63d 100644
--- a/drivers/tty/serial/mxs-auart.c
+++ b/drivers/tty/serial/mxs-auart.c
@@ -73,6 +73,7 @@
#define AUART_CTRL0_CLKGATE (1 << 30)
#define AUART_CTRL2_CTSEN (1 << 15)
+#define AUART_CTRL2_RTSEN (1 << 14)
#define AUART_CTRL2_RTS (1 << 11)
#define AUART_CTRL2_RXE (1 << 9)
#define AUART_CTRL2_TXE (1 << 8)
@@ -259,9 +260,12 @@ static void mxs_auart_set_mctrl(struct uart_port *u, unsigned mctrl)
u32 ctrl = readl(u->membase + AUART_CTRL2);
- ctrl &= ~AUART_CTRL2_RTS;
- if (mctrl & TIOCM_RTS)
- ctrl |= AUART_CTRL2_RTS;
+ ctrl &= ~AUART_CTRL2_RTSEN;
+ if (mctrl & TIOCM_RTS) {
+ if (u->state->port.flags & ASYNC_CTS_FLOW)
+ ctrl |= AUART_CTRL2_RTSEN;
+ }
+
s->ctrl = mctrl;
writel(ctrl, u->membase + AUART_CTRL2);
}
@@ -359,9 +363,9 @@ static void mxs_auart_settermios(struct uart_port *u,
/* figure out the hardware flow control settings */
if (cflag & CRTSCTS)
- ctrl2 |= AUART_CTRL2_CTSEN;
+ ctrl2 |= AUART_CTRL2_CTSEN | AUART_CTRL2_RTSEN;
else
- ctrl2 &= ~AUART_CTRL2_CTSEN;
+ ctrl2 &= ~(AUART_CTRL2_CTSEN | AUART_CTRL2_RTSEN);
/* set baud rate */
baud = uart_get_baud_rate(u, termios, old, 0, u->uartclk);
diff --git a/drivers/tty/serial/pmac_zilog.c b/drivers/tty/serial/pmac_zilog.c
index 654755a990d..333c8d012b0 100644
--- a/drivers/tty/serial/pmac_zilog.c
+++ b/drivers/tty/serial/pmac_zilog.c
@@ -1348,10 +1348,16 @@ static int pmz_verify_port(struct uart_port *port, struct serial_struct *ser)
static int pmz_poll_get_char(struct uart_port *port)
{
struct uart_pmac_port *uap = (struct uart_pmac_port *)port;
+ int tries = 2;
- while ((read_zsreg(uap, R0) & Rx_CH_AV) == 0)
- udelay(5);
- return read_zsdata(uap);
+ while (tries) {
+ if ((read_zsreg(uap, R0) & Rx_CH_AV) != 0)
+ return read_zsdata(uap);
+ if (tries--)
+ udelay(5);
+ }
+
+ return NO_POLL_CHAR;
}
static void pmz_poll_put_char(struct uart_port *port, unsigned char c)