summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2014-08-11 07:04:17 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2014-08-11 07:04:17 -0700
commit5fd41f2a10b38ab84b4c2436140ce490d34291fa (patch)
tree0c5e39f8c0ca03004db863cf05e5b20873c0cb48
parent2213d7c29a434626a15ffb285182cd19ed0b722d (diff)
parent47d104ba5879790c7c91c3390b0b08399e168efe (diff)
Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux
Pull thermal updates from Zhang Rui: "Specifics: - adds full support for 2 types of Thermal Controllers produced by STMicroelectronics. One is a more traditional memory mapped variant, the other is controlled solely by system configuration registers. From Lee Jones. - add TMU (Thermal Management Unit) support for Exynos3250 Soc. From Chanwoo Choi. - add critical and passive trip point support for int3403 thermal driver. From Srinivas Pandruvada. - a couple of small fixes/cleanups from Javi Merino, and Geert Uytterhoeven" * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: thermal: document struct thermal_zone_device and thermal_governor thermal: cpu_cooling: fix typo highjack -> hijack thermal: rcar: Document SoC-specific bindings thermal: samsung: Add TMU support for Exynos3250 SoC thermal: exynos: fix ordering in exynos_tmu_remove() thermal: allow building dove_thermal with mvebu thermal: sti: Add support for ST's Memory Mapped based Thermal controller thermal: sti: Add support for ST's System Config Register based Thermal controller thermal: sti: Introduce ST Thermal core code thermal: sti: Supply Device Tree documentation Thermal: int3403: Add CRT and PSV trip
-rw-r--r--Documentation/devicetree/bindings/thermal/exynos-thermal.txt1
-rw-r--r--Documentation/devicetree/bindings/thermal/rcar-thermal.txt18
-rw-r--r--Documentation/devicetree/bindings/thermal/st-thermal.txt42
-rw-r--r--drivers/thermal/Kconfig7
-rw-r--r--drivers/thermal/Makefile1
-rw-r--r--drivers/thermal/cpu_cooling.c2
-rw-r--r--drivers/thermal/int3403_thermal.c67
-rw-r--r--drivers/thermal/samsung/exynos_tmu.c11
-rw-r--r--drivers/thermal/samsung/exynos_tmu.h3
-rw-r--r--drivers/thermal/samsung/exynos_tmu_data.c89
-rw-r--r--drivers/thermal/samsung/exynos_tmu_data.h7
-rw-r--r--drivers/thermal/st/Kconfig12
-rw-r--r--drivers/thermal/st/Makefile3
-rw-r--r--drivers/thermal/st/st_thermal.c313
-rw-r--r--drivers/thermal/st/st_thermal.h104
-rw-r--r--drivers/thermal/st/st_thermal_memmap.c209
-rw-r--r--drivers/thermal/st/st_thermal_syscfg.c179
-rw-r--r--include/linux/thermal.h46
18 files changed, 1093 insertions, 21 deletions
diff --git a/Documentation/devicetree/bindings/thermal/exynos-thermal.txt b/Documentation/devicetree/bindings/thermal/exynos-thermal.txt
index c94909215c0..ae738f562ac 100644
--- a/Documentation/devicetree/bindings/thermal/exynos-thermal.txt
+++ b/Documentation/devicetree/bindings/thermal/exynos-thermal.txt
@@ -3,6 +3,7 @@
** Required properties:
- compatible : One of the following:
+ "samsung,exynos3250-tmu"
"samsung,exynos4412-tmu"
"samsung,exynos4210-tmu"
"samsung,exynos5250-tmu"
diff --git a/Documentation/devicetree/bindings/thermal/rcar-thermal.txt b/Documentation/devicetree/bindings/thermal/rcar-thermal.txt
index 28ef498a66e..0ef00be44b0 100644
--- a/Documentation/devicetree/bindings/thermal/rcar-thermal.txt
+++ b/Documentation/devicetree/bindings/thermal/rcar-thermal.txt
@@ -1,7 +1,13 @@
* Renesas R-Car Thermal
Required properties:
-- compatible : "renesas,rcar-thermal"
+- compatible : "renesas,thermal-<soctype>", "renesas,rcar-thermal"
+ as fallback.
+ Examples with soctypes are:
+ - "renesas,thermal-r8a73a4" (R-Mobile AP6)
+ - "renesas,thermal-r8a7779" (R-Car H1)
+ - "renesas,thermal-r8a7790" (R-Car H2)
+ - "renesas,thermal-r8a7791" (R-Car M2)
- reg : Address range of the thermal registers.
The 1st reg will be recognized as common register
if it has "interrupts".
@@ -12,18 +18,18 @@ Option properties:
Example (non interrupt support):
-thermal@e61f0100 {
- compatible = "renesas,rcar-thermal";
- reg = <0xe61f0100 0x38>;
+thermal@ffc48000 {
+ compatible = "renesas,thermal-r8a7779", "renesas,rcar-thermal";
+ reg = <0xffc48000 0x38>;
};
Example (interrupt support):
thermal@e61f0000 {
- compatible = "renesas,rcar-thermal";
+ compatible = "renesas,thermal-r8a73a4", "renesas,rcar-thermal";
reg = <0xe61f0000 0x14
0xe61f0100 0x38
0xe61f0200 0x38
0xe61f0300 0x38>;
- interrupts = <0 69 4>;
+ interrupts = <0 69 IRQ_TYPE_LEVEL_HIGH>;
};
diff --git a/Documentation/devicetree/bindings/thermal/st-thermal.txt b/Documentation/devicetree/bindings/thermal/st-thermal.txt
new file mode 100644
index 00000000000..3b9251b4a14
--- /dev/null
+++ b/Documentation/devicetree/bindings/thermal/st-thermal.txt
@@ -0,0 +1,42 @@
+Binding for Thermal Sensor driver for STMicroelectronics STi series of SoCs.
+
+Required parameters:
+-------------------
+
+compatible : st,<SoC>-<module>-thermal; should be one of:
+ "st,stih415-sas-thermal",
+ "st,stih415-mpe-thermal",
+ "st,stih416-sas-thermal"
+ "st,stih416-mpe-thermal"
+ "st,stid127-thermal" or
+ "st,stih407-thermal"
+ according to the SoC type (stih415, stih416, stid127, stih407)
+ and module type (sas or mpe). On stid127 & stih407 there is only
+ one die/module, so there is no module type in the compatible
+ string.
+clock-names : Should be "thermal".
+ See: Documentation/devicetree/bindings/resource-names.txt
+clocks : Phandle of the clock used by the thermal sensor.
+ See: Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Optional parameters:
+-------------------
+
+reg : For non-sysconf based sensors, this should be the physical base
+ address and length of the sensor's registers.
+interrupts : Standard way to define interrupt number.
+ Interrupt is mandatory to be defined when compatible is
+ "stih416-mpe-thermal".
+ NB: For thermal sensor's for which no interrupt has been
+ defined, a polling delay of 1000ms will be used to read the
+ temperature from device.
+
+Example:
+
+ temp1@fdfe8000 {
+ compatible = "st,stih416-mpe-thermal";
+ reg = <0xfdfe8000 0x10>;
+ clock-names = "thermal";
+ clocks = <&clk_m_mpethsens>;
+ interrupts = <GIC_SPI 23 IRQ_TYPE_NONE>;
+ };
diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig
index f9a13867cb7..693208eb904 100644
--- a/drivers/thermal/Kconfig
+++ b/drivers/thermal/Kconfig
@@ -151,7 +151,7 @@ config KIRKWOOD_THERMAL
config DOVE_THERMAL
tristate "Temperature sensor on Marvell Dove SoCs"
- depends on ARCH_DOVE
+ depends on ARCH_DOVE || MACH_DOVE
depends on OF
help
Support for the Dove thermal sensor driver in the Linux thermal
@@ -243,4 +243,9 @@ depends on ARCH_EXYNOS
source "drivers/thermal/samsung/Kconfig"
endmenu
+menu "STMicroelectronics thermal drivers"
+depends on ARCH_STI && OF
+source "drivers/thermal/st/Kconfig"
+endmenu
+
endif
diff --git a/drivers/thermal/Makefile b/drivers/thermal/Makefile
index de0636a57a6..31e232f84b6 100644
--- a/drivers/thermal/Makefile
+++ b/drivers/thermal/Makefile
@@ -32,3 +32,4 @@ obj-$(CONFIG_X86_PKG_TEMP_THERMAL) += x86_pkg_temp_thermal.o
obj-$(CONFIG_INTEL_SOC_DTS_THERMAL) += intel_soc_dts_thermal.o
obj-$(CONFIG_TI_SOC_THERMAL) += ti-soc-thermal/
obj-$(CONFIG_ACPI_INT3403_THERMAL) += int3403_thermal.o
+obj-$(CONFIG_ST_THERMAL) += st/
diff --git a/drivers/thermal/cpu_cooling.c b/drivers/thermal/cpu_cooling.c
index 84a75f89bf7..1ab0018271c 100644
--- a/drivers/thermal/cpu_cooling.c
+++ b/drivers/thermal/cpu_cooling.c
@@ -305,7 +305,7 @@ static int cpufreq_apply_cooling(struct cpufreq_cooling_device *cpufreq_device,
* @event: value showing cpufreq event for which this function invoked.
* @data: callback-specific data
*
- * Callback to highjack the notification on cpufreq policy transition.
+ * Callback to hijack the notification on cpufreq policy transition.
* Every time there is a change in policy, we will intercept and
* update the cpufreq policy with thermal constraints.
*
diff --git a/drivers/thermal/int3403_thermal.c b/drivers/thermal/int3403_thermal.c
index e93f0253f6e..17554eeb395 100644
--- a/drivers/thermal/int3403_thermal.c
+++ b/drivers/thermal/int3403_thermal.c
@@ -33,6 +33,10 @@
struct int3403_sensor {
struct thermal_zone_device *tzone;
unsigned long *thresholds;
+ unsigned long crit_temp;
+ int crit_trip_id;
+ unsigned long psv_temp;
+ int psv_trip_id;
};
static int sys_get_curr_temp(struct thermal_zone_device *tzone,
@@ -79,12 +83,18 @@ static int sys_get_trip_temp(struct thermal_zone_device *tzone,
struct acpi_device *device = tzone->devdata;
struct int3403_sensor *obj = acpi_driver_data(device);
- /*
- * get_trip_temp is a mandatory callback but
- * PATx method doesn't return any value, so return
- * cached value, which was last set from user space.
- */
- *temp = obj->thresholds[trip];
+ if (trip == obj->crit_trip_id)
+ *temp = obj->crit_temp;
+ else if (trip == obj->psv_trip_id)
+ *temp = obj->psv_temp;
+ else {
+ /*
+ * get_trip_temp is a mandatory callback but
+ * PATx method doesn't return any value, so return
+ * cached value, which was last set from user space.
+ */
+ *temp = obj->thresholds[trip];
+ }
return 0;
}
@@ -92,8 +102,14 @@ static int sys_get_trip_temp(struct thermal_zone_device *tzone,
static int sys_get_trip_type(struct thermal_zone_device *thermal,
int trip, enum thermal_trip_type *type)
{
+ struct acpi_device *device = thermal->devdata;
+ struct int3403_sensor *obj = acpi_driver_data(device);
+
/* Mandatory callback, may not mean much here */
- *type = THERMAL_TRIP_PASSIVE;
+ if (trip == obj->crit_trip_id)
+ *type = THERMAL_TRIP_CRITICAL;
+ else
+ *type = THERMAL_TRIP_PASSIVE;
return 0;
}
@@ -155,6 +171,34 @@ static void acpi_thermal_notify(struct acpi_device *device, u32 event)
}
}
+static int sys_get_trip_crt(struct acpi_device *device, unsigned long *temp)
+{
+ unsigned long long crt;
+ acpi_status status;
+
+ status = acpi_evaluate_integer(device->handle, "_CRT", NULL, &crt);
+ if (ACPI_FAILURE(status))
+ return -EIO;
+
+ *temp = DECI_KELVIN_TO_MILLI_CELSIUS(crt, KELVIN_OFFSET);
+
+ return 0;
+}
+
+static int sys_get_trip_psv(struct acpi_device *device, unsigned long *temp)
+{
+ unsigned long long psv;
+ acpi_status status;
+
+ status = acpi_evaluate_integer(device->handle, "_PSV", NULL, &psv);
+ if (ACPI_FAILURE(status))
+ return -EIO;
+
+ *temp = DECI_KELVIN_TO_MILLI_CELSIUS(psv, KELVIN_OFFSET);
+
+ return 0;
+}
+
static int acpi_int3403_add(struct acpi_device *device)
{
int result = 0;
@@ -194,6 +238,15 @@ static int acpi_int3403_add(struct acpi_device *device)
return -ENOMEM;
trip_mask = BIT(trip_cnt) - 1;
}
+
+ obj->psv_trip_id = -1;
+ if (!sys_get_trip_psv(device, &obj->psv_temp))
+ obj->psv_trip_id = trip_cnt++;
+
+ obj->crit_trip_id = -1;
+ if (!sys_get_trip_crt(device, &obj->crit_temp))
+ obj->crit_trip_id = trip_cnt++;
+
obj->tzone = thermal_zone_device_register(acpi_device_bid(device),
trip_cnt, trip_mask, device, &tzone_ops,
NULL, 0, 0);
diff --git a/drivers/thermal/samsung/exynos_tmu.c b/drivers/thermal/samsung/exynos_tmu.c
index d7ca9f49c9c..acbff14da3a 100644
--- a/drivers/thermal/samsung/exynos_tmu.c
+++ b/drivers/thermal/samsung/exynos_tmu.c
@@ -505,6 +505,10 @@ static irqreturn_t exynos_tmu_irq(int irq, void *id)
static const struct of_device_id exynos_tmu_match[] = {
{
+ .compatible = "samsung,exynos3250-tmu",
+ .data = (void *)EXYNOS3250_TMU_DRV_DATA,
+ },
+ {
.compatible = "samsung,exynos4210-tmu",
.data = (void *)EXYNOS4210_TMU_DRV_DATA,
},
@@ -677,7 +681,8 @@ static int exynos_tmu_probe(struct platform_device *pdev)
goto err_clk_sec;
}
- if (pdata->type == SOC_ARCH_EXYNOS4210 ||
+ if (pdata->type == SOC_ARCH_EXYNOS3250 ||
+ pdata->type == SOC_ARCH_EXYNOS4210 ||
pdata->type == SOC_ARCH_EXYNOS4412 ||
pdata->type == SOC_ARCH_EXYNOS5250 ||
pdata->type == SOC_ARCH_EXYNOS5260 ||
@@ -759,10 +764,10 @@ static int exynos_tmu_remove(struct platform_device *pdev)
{
struct exynos_tmu_data *data = platform_get_drvdata(pdev);
- exynos_tmu_control(pdev, false);
-
exynos_unregister_thermal(data->reg_conf);
+ exynos_tmu_control(pdev, false);
+
clk_unprepare(data->clk);
if (!IS_ERR(data->clk_sec))
clk_unprepare(data->clk_sec);
diff --git a/drivers/thermal/samsung/exynos_tmu.h b/drivers/thermal/samsung/exynos_tmu.h
index edd08cf7672..1b4a6444ea6 100644
--- a/drivers/thermal/samsung/exynos_tmu.h
+++ b/drivers/thermal/samsung/exynos_tmu.h
@@ -40,7 +40,8 @@ enum calibration_mode {
};
enum soc_type {
- SOC_ARCH_EXYNOS4210 = 1,
+ SOC_ARCH_EXYNOS3250 = 1,
+ SOC_ARCH_EXYNOS4210,
SOC_ARCH_EXYNOS4412,
SOC_ARCH_EXYNOS5250,
SOC_ARCH_EXYNOS5260,
diff --git a/drivers/thermal/samsung/exynos_tmu_data.c b/drivers/thermal/samsung/exynos_tmu_data.c
index c1d81dcd781..aa8e0dee205 100644
--- a/drivers/thermal/samsung/exynos_tmu_data.c
+++ b/drivers/thermal/samsung/exynos_tmu_data.c
@@ -90,6 +90,95 @@ struct exynos_tmu_init_data const exynos4210_default_tmu_data = {
};
#endif
+#if defined(CONFIG_SOC_EXYNOS3250)
+static const struct exynos_tmu_registers exynos3250_tmu_registers = {
+ .triminfo_data = EXYNOS_TMU_REG_TRIMINFO,
+ .triminfo_25_shift = EXYNOS_TRIMINFO_25_SHIFT,
+ .triminfo_85_shift = EXYNOS_TRIMINFO_85_SHIFT,
+ .tmu_ctrl = EXYNOS_TMU_REG_CONTROL,
+ .test_mux_addr_shift = EXYNOS4412_MUX_ADDR_SHIFT,
+ .buf_vref_sel_shift = EXYNOS_TMU_REF_VOLTAGE_SHIFT,
+ .buf_vref_sel_mask = EXYNOS_TMU_REF_VOLTAGE_MASK,
+ .therm_trip_mode_shift = EXYNOS_TMU_TRIP_MODE_SHIFT,
+ .therm_trip_mode_mask = EXYNOS_TMU_TRIP_MODE_MASK,
+ .therm_trip_en_shift = EXYNOS_TMU_THERM_TRIP_EN_SHIFT,
+ .buf_slope_sel_shift = EXYNOS_TMU_BUF_SLOPE_SEL_SHIFT,
+ .buf_slope_sel_mask = EXYNOS_TMU_BUF_SLOPE_SEL_MASK,
+ .core_en_shift = EXYNOS_TMU_CORE_EN_SHIFT,
+ .tmu_status = EXYNOS_TMU_REG_STATUS,
+ .tmu_cur_temp = EXYNOS_TMU_REG_CURRENT_TEMP,
+ .threshold_th0 = EXYNOS_THD_TEMP_RISE,
+ .threshold_th1 = EXYNOS_THD_TEMP_FALL,
+ .tmu_inten = EXYNOS_TMU_REG_INTEN,
+ .inten_rise0_shift = EXYNOS_TMU_INTEN_RISE0_SHIFT,
+ .inten_rise1_shift = EXYNOS_TMU_INTEN_RISE1_SHIFT,
+ .inten_rise2_shift = EXYNOS_TMU_INTEN_RISE2_SHIFT,
+ .inten_fall0_shift = EXYNOS_TMU_INTEN_FALL0_SHIFT,
+ .tmu_intstat = EXYNOS_TMU_REG_INTSTAT,
+ .tmu_intclear = EXYNOS_TMU_REG_INTCLEAR,
+ .intclr_fall_shift = EXYNOS_TMU_CLEAR_FALL_INT_SHIFT,
+ .intclr_rise_shift = EXYNOS_TMU_RISE_INT_SHIFT,
+ .intclr_rise_mask = EXYNOS_TMU_RISE_INT_MASK,
+ .intclr_fall_mask = EXYNOS_TMU_FALL_INT_MASK,
+ .emul_con = EXYNOS_EMUL_CON,
+ .emul_temp_shift = EXYNOS_EMUL_DATA_SHIFT,
+ .emul_time_shift = EXYNOS_EMUL_TIME_SHIFT,
+ .emul_time_mask = EXYNOS_EMUL_TIME_MASK,
+};
+
+#define EXYNOS3250_TMU_DATA \
+ .threshold_falling = 10, \
+ .trigger_levels[0] = 70, \
+ .trigger_levels[1] = 95, \
+ .trigger_levels[2] = 110, \
+ .trigger_levels[3] = 120, \
+ .trigger_enable[0] = true, \
+ .trigger_enable[1] = true, \
+ .trigger_enable[2] = true, \
+ .trigger_enable[3] = false, \
+ .trigger_type[0] = THROTTLE_ACTIVE, \
+ .trigger_type[1] = THROTTLE_ACTIVE, \
+ .trigger_type[2] = SW_TRIP, \
+ .trigger_type[3] = HW_TRIP, \
+ .max_trigger_level = 4, \
+ .gain = 8, \
+ .reference_voltage = 16, \
+ .noise_cancel_mode = 4, \
+ .cal_type = TYPE_TWO_POINT_TRIMMING, \
+ .efuse_value = 55, \
+ .min_efuse_value = 40, \
+ .max_efuse_value = 100, \
+ .first_point_trim = 25, \
+ .second_point_trim = 85, \
+ .default_temp_offset = 50, \
+ .freq_tab[0] = { \
+ .freq_clip_max = 800 * 1000, \
+ .temp_level = 70, \
+ }, \
+ .freq_tab[1] = { \
+ .freq_clip_max = 400 * 1000, \
+ .temp_level = 95, \
+ }, \
+ .freq_tab_count = 2, \
+ .registers = &exynos3250_tmu_registers, \
+ .features = (TMU_SUPPORT_EMULATION | \
+ TMU_SUPPORT_FALLING_TRIP | TMU_SUPPORT_READY_STATUS | \
+ TMU_SUPPORT_EMUL_TIME)
+#endif
+
+#if defined(CONFIG_SOC_EXYNOS3250)
+struct exynos_tmu_init_data const exynos3250_default_tmu_data = {
+ .tmu_data = {
+ {
+ EXYNOS3250_TMU_DATA,
+ .type = SOC_ARCH_EXYNOS3250,
+ .test_mux = EXYNOS4412_MUX_ADDR_VALUE,
+ },
+ },
+ .tmu_count = 1,
+};
+#endif
+
#if defined(CONFIG_SOC_EXYNOS4412) || defined(CONFIG_SOC_EXYNOS5250)
static const struct exynos_tmu_registers exynos4412_tmu_registers = {
.triminfo_data = EXYNOS_TMU_REG_TRIMINFO,
diff --git a/drivers/thermal/samsung/exynos_tmu_data.h b/drivers/thermal/samsung/exynos_tmu_data.h
index d268981b65e..f0979e59849 100644
--- a/drivers/thermal/samsung/exynos_tmu_data.h
+++ b/drivers/thermal/samsung/exynos_tmu_data.h
@@ -148,6 +148,13 @@
#define EXYNOS5440_TMU_TH_RISE4_SHIFT 24
#define EXYNOS5440_EFUSE_SWAP_OFFSET 8
+#if defined(CONFIG_SOC_EXYNOS3250)
+extern struct exynos_tmu_init_data const exynos3250_default_tmu_data;
+#define EXYNOS3250_TMU_DRV_DATA (&exynos3250_default_tmu_data)
+#else
+#define EXYNOS3250_TMU_DRV_DATA (NULL)
+#endif
+
#if defined(CONFIG_CPU_EXYNOS4210)
extern struct exynos_tmu_init_data const exynos4210_default_tmu_data;
#define EXYNOS4210_TMU_DRV_DATA (&exynos4210_default_tmu_data)
diff --git a/drivers/thermal/st/Kconfig b/drivers/thermal/st/Kconfig
new file mode 100644
index 00000000000..490fdbe22ee
--- /dev/null
+++ b/drivers/thermal/st/Kconfig
@@ -0,0 +1,12 @@
+config ST_THERMAL
+ tristate "Thermal sensors on STMicroelectronics STi series of SoCs"
+ help
+ Support for thermal sensors on STMicroelectronics STi series of SoCs.
+
+config ST_THERMAL_SYSCFG
+ select ST_THERMAL
+ tristate "STi series syscfg register access based thermal sensors"
+
+config ST_THERMAL_MEMMAP
+ select ST_THERMAL
+ tristate "STi series memory mapped access based thermal sensors"
diff --git a/drivers/thermal/st/Makefile b/drivers/thermal/st/Makefile
new file mode 100644
index 00000000000..b38878977bd
--- /dev/null
+++ b/drivers/thermal/st/Makefile
@@ -0,0 +1,3 @@
+obj-$(CONFIG_ST_THERMAL) := st_thermal.o
+obj-$(CONFIG_ST_THERMAL_SYSCFG) += st_thermal_syscfg.o
+obj-$(CONFIG_ST_THERMAL_MEMMAP) += st_thermal_memmap.o
diff --git a/drivers/thermal/st/st_thermal.c b/drivers/thermal/st/st_thermal.c
new file mode 100644
index 00000000000..90163b38466
--- /dev/null
+++ b/drivers/thermal/st/st_thermal.c
@@ -0,0 +1,313 @@
+/*
+ * ST Thermal Sensor Driver core routines
+ * Author: Ajit Pal Singh <ajitpal.singh@st.com>
+ *
+ * Copyright (C) 2003-2014 STMicroelectronics (R&D) Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#include <linux/clk.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+
+#include "st_thermal.h"
+
+/* The Thermal Framework expects millidegrees */
+#define mcelsius(temp) ((temp) * 1000)
+
+/*
+ * Function to allocate regfields which are common
+ * between syscfg and memory mapped based sensors
+ */
+int st_thermal_alloc_regfields(struct st_thermal_sensor *sensor)
+{
+ struct device *dev = sensor->dev;
+ struct regmap *regmap = sensor->regmap;
+ const struct reg_field *reg_fields = sensor->cdata->reg_fields;
+
+ sensor->dcorrect = devm_regmap_field_alloc(dev, regmap,
+ reg_fields[DCORRECT]);
+
+ sensor->overflow = devm_regmap_field_alloc(dev, regmap,
+ reg_fields[OVERFLOW]);
+
+ sensor->temp_data = devm_regmap_field_alloc(dev, regmap,
+ reg_fields[DATA]);
+
+ if (IS_ERR(sensor->dcorrect) ||
+ IS_ERR(sensor->overflow) ||
+ IS_ERR(sensor->temp_data)) {
+ dev_err(dev, "failed to allocate common regfields\n");
+ return -EINVAL;
+ }
+
+ return sensor->ops->alloc_regfields(sensor);
+}
+
+static int st_thermal_sensor_on(struct st_thermal_sensor *sensor)
+{
+ int ret;
+ struct device *dev = sensor->dev;
+
+ ret = clk_prepare_enable(sensor->clk);
+ if (ret) {
+ dev_err(dev, "failed to enable clk\n");
+ return ret;
+ }
+
+ ret = sensor->ops->power_ctrl(sensor, POWER_ON);
+ if (ret) {
+ dev_err(dev, "failed to power on sensor\n");
+ clk_disable_unprepare(sensor->clk);
+ }
+
+ return ret;
+}
+
+static int st_thermal_sensor_off(struct st_thermal_sensor *sensor)
+{
+ int ret;
+
+ ret = sensor->ops->power_ctrl(sensor, POWER_OFF);
+ if (ret)
+ return ret;
+
+ clk_disable_unprepare(sensor->clk);
+
+ return 0;
+}
+
+static int st_thermal_calibration(struct st_thermal_sensor *sensor)
+{
+ int ret;
+ unsigned int val;
+ struct device *dev = sensor->dev;
+
+ /* Check if sensor calibration data is already written */
+ ret = regmap_field_read(sensor->dcorrect, &val);
+ if (ret) {
+ dev_err(dev, "failed to read calibration data\n");
+ return ret;
+ }
+
+ if (!val) {
+ /*
+ * Sensor calibration value not set by bootloader,
+ * default calibration data to be used
+ */
+ ret = regmap_field_write(sensor->dcorrect,
+ sensor->cdata->calibration_val);
+ if (ret)
+ dev_err(dev, "failed to set calibration data\n");
+ }
+
+ return ret;
+}
+
+/* Callback to get temperature from HW*/
+static int st_thermal_get_temp(struct thermal_zone_device *th,
+ unsigned long *temperature)
+{
+ struct st_thermal_sensor *sensor = th->devdata;
+ struct device *dev = sensor->dev;
+ unsigned int temp;
+ unsigned int overflow;
+ int ret;
+
+ ret = regmap_field_read(sensor->overflow, &overflow);
+ if (ret)
+ return ret;
+ if (overflow)
+ return -EIO;
+
+ ret = regmap_field_read(sensor->temp_data, &temp);
+ if (ret)
+ return ret;
+
+ temp += sensor->cdata->temp_adjust_val;
+ temp = mcelsius(temp);
+
+ dev_dbg(dev, "temperature: %d\n", temp);
+
+ *temperature = temp;
+
+ return 0;
+}
+
+static int st_thermal_get_trip_type(struct thermal_zone_device *th,
+ int trip, enum thermal_trip_type *type)
+{
+ struct st_thermal_sensor *sensor = th->devdata;
+ struct device *dev = sensor->dev;
+
+ switch (trip) {
+ case 0:
+ *type = THERMAL_TRIP_CRITICAL;
+ break;
+ default:
+ dev_err(dev, "invalid trip point\n");
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int st_thermal_get_trip_temp(struct thermal_zone_device *th,
+ int trip, unsigned long *temp)
+{
+ struct st_thermal_sensor *sensor = th->devdata;
+ struct device *dev = sensor->dev;
+
+ switch (trip) {
+ case 0:
+ *temp = mcelsius(sensor->cdata->crit_temp);
+ break;
+ default:
+ dev_err(dev, "Invalid trip point\n");
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static struct thermal_zone_device_ops st_tz_ops = {
+ .get_temp = st_thermal_get_temp,
+ .get_trip_type = st_thermal_get_trip_type,
+ .get_trip_temp = st_thermal_get_trip_temp,
+};
+
+int st_thermal_register(struct platform_device *pdev,
+ const struct of_device_id *st_thermal_of_match)
+{
+ struct st_thermal_sensor *sensor;
+ struct device *dev = &pdev->dev;
+ struct device_node *np = dev->of_node;
+ const struct of_device_id *match;
+
+ int polling_delay;
+ int ret;
+
+ if (!np) {
+ dev_err(dev, "device tree node not found\n");
+ return -EINVAL;
+ }
+
+ sensor = devm_kzalloc(dev, sizeof(*sensor), GFP_KERNEL);
+ if (!sensor)
+ return -ENOMEM;
+
+ sensor->dev = dev;
+
+ match = of_match_device(st_thermal_of_match, dev);
+ if (!(match && match->data))
+ return -EINVAL;
+
+ sensor->cdata = match->data;
+ if (!sensor->cdata->ops)
+ return -EINVAL;
+
+ sensor->ops = sensor->cdata->ops;
+
+ ret = sensor->ops->regmap_init(sensor);
+ if (ret)
+ return ret;
+
+ ret = st_thermal_alloc_regfields(sensor);
+ if (ret)
+ return ret;
+
+ sensor->clk = devm_clk_get(dev, "thermal");
+ if (IS_ERR(sensor->clk)) {
+ dev_err(dev, "failed to fetch clock\n");
+ return PTR_ERR(sensor->clk);
+ }
+
+ if (sensor->ops->register_enable_irq) {
+ ret = sensor->ops->register_enable_irq(sensor);
+ if (ret)
+ return ret;
+ }
+
+ ret = st_thermal_sensor_on(sensor);
+ if (ret)
+ return ret;
+
+ ret = st_thermal_calibration(sensor);
+ if (ret)
+ goto sensor_off;
+
+ polling_delay = sensor->ops->register_enable_irq ? 0 : 1000;
+
+ sensor->thermal_dev =
+ thermal_zone_device_register(dev_name(dev), 1, 0, sensor,
+ &st_tz_ops, NULL, 0, polling_delay);
+ if (IS_ERR(sensor->thermal_dev)) {
+ dev_err(dev, "failed to register thermal zone device\n");
+ ret = PTR_ERR(sensor->thermal_dev);
+ goto sensor_off;
+ }
+
+ platform_set_drvdata(pdev, sensor);
+
+ return 0;
+
+sensor_off:
+ st_thermal_sensor_off(sensor);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(st_thermal_register);
+
+int st_thermal_unregister(struct platform_device *pdev)
+{
+ struct st_thermal_sensor *sensor = platform_get_drvdata(pdev);
+
+ st_thermal_sensor_off(sensor);
+ thermal_zone_device_unregister(sensor->thermal_dev);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(st_thermal_unregister);
+
+static int st_thermal_suspend(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct st_thermal_sensor *sensor = platform_get_drvdata(pdev);
+
+ return st_thermal_sensor_off(sensor);
+}
+
+static int st_thermal_resume(struct device *dev)
+{
+ int ret;
+ struct platform_device *pdev = to_platform_device(dev);
+ struct st_thermal_sensor *sensor = platform_get_drvdata(pdev);
+
+ ret = st_thermal_sensor_on(sensor);
+ if (ret)
+ return ret;
+
+ ret = st_thermal_calibration(sensor);
+ if (ret)
+ return ret;
+
+ if (sensor->ops->enable_irq) {
+ ret = sensor->ops->enable_irq(sensor);
+ if (ret)
+ return ret;
+ }
+
+ return 0;
+}
+SIMPLE_DEV_PM_OPS(st_thermal_pm_ops, st_thermal_suspend, st_thermal_resume);
+EXPORT_SYMBOL_GPL(st_thermal_pm_ops);
+
+MODULE_AUTHOR("STMicroelectronics (R&D) Limited <ajitpal.singh@st.com>");
+MODULE_DESCRIPTION("STMicroelectronics STi SoC Thermal Sensor Driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/thermal/st/st_thermal.h b/drivers/thermal/st/st_thermal.h
new file mode 100644
index 00000000000..fecafbe10fa
--- /dev/null
+++ b/drivers/thermal/st/st_thermal.h
@@ -0,0 +1,104 @@
+/*
+ * ST Thermal Sensor Driver for STi series of SoCs
+ * Author: Ajit Pal Singh <ajitpal.singh@st.com>
+ *
+ * Copyright (C) 2003-2014 STMicroelectronics (R&D) Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef __STI_THERMAL_SYSCFG_H
+#define __STI_THERMAL_SYSCFG_H
+
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/thermal.h>
+
+enum st_thermal_regfield_ids {
+ INT_THRESH_HI = 0, /* Top two regfield IDs are mutually exclusive */
+ TEMP_PWR = 0,
+ DCORRECT,
+ OVERFLOW,
+ DATA,
+ INT_ENABLE,
+
+ MAX_REGFIELDS
+};
+
+/* Thermal sensor power states */
+enum st_thermal_power_state {
+ POWER_OFF = 0,
+ POWER_ON
+};
+
+struct st_thermal_sensor;
+
+/**
+ * Description of private thermal sensor ops.
+ *
+ * @power_ctrl: Function for powering on/off a sensor. Clock to the
+ * sensor is also controlled from this function.
+ * @alloc_regfields: Allocate regmap register fields, specific to a sensor.
+ * @do_memmap_regmap: Memory map the thermal register space and init regmap
+ * instance or find regmap instance.
+ * @register_irq: Register an interrupt handler for a sensor.
+ */
+struct st_thermal_sensor_ops {
+ int (*power_ctrl)(struct st_thermal_sensor *, enum st_thermal_power_state);
+ int (*alloc_regfields)(struct st_thermal_sensor *);
+ int (*regmap_init)(struct st_thermal_sensor *);
+ int (*register_enable_irq)(struct st_thermal_sensor *);
+ int (*enable_irq)(struct st_thermal_sensor *);
+};
+
+/**
+ * Description of thermal driver compatible data.
+ *
+ * @reg_fields: Pointer to the regfields array for a sensor.
+ * @sys_compat: Pointer to the syscon node compatible string.
+ * @ops: Pointer to private thermal ops for a sensor.
+ * @calibration_val: Default calibration value to be written to the DCORRECT
+ * register field for a sensor.
+ * @temp_adjust_val: Value to be added/subtracted from the data read from
+ * the sensor. If value needs to be added please provide a
+ * positive value and if it is to be subtracted please
+ * provide a negative value.
+ * @crit_temp: The temperature beyond which the SoC should be shutdown
+ * to prevent damage.
+ */
+struct st_thermal_compat_data {
+ char *sys_compat;
+ const struct reg_field *reg_fields;
+ const struct st_thermal_sensor_ops *ops;
+ unsigned int calibration_val;
+ int temp_adjust_val;
+ int crit_temp;
+};
+
+struct st_thermal_sensor {
+ struct device *dev;
+ struct thermal_zone_device *thermal_dev;
+ const struct st_thermal_sensor_ops *ops;
+ const struct st_thermal_compat_data *cdata;
+ struct clk *clk;
+ struct regmap *regmap;
+ struct regmap_field *pwr;
+ struct regmap_field *dcorrect;
+ struct regmap_field *overflow;
+ struct regmap_field *temp_data;
+ struct regmap_field *int_thresh_hi;
+ struct regmap_field *int_enable;
+ int irq;
+ void __iomem *mmio_base;
+};
+
+extern int st_thermal_register(struct platform_device *pdev,
+ const struct of_device_id *st_thermal_of_match);
+extern int st_thermal_unregister(struct platform_device *pdev);
+extern const struct dev_pm_ops st_thermal_pm_ops;
+
+#endif /* __STI_RESET_SYSCFG_H */
diff --git a/drivers/thermal/st/st_thermal_memmap.c b/drivers/thermal/st/st_thermal_memmap.c
new file mode 100644
index 00000000000..39896ce2ee0
--- /dev/null
+++ b/drivers/thermal/st/st_thermal_memmap.c
@@ -0,0 +1,209 @@
+/*
+ * ST Thermal Sensor Driver for memory mapped sensors.
+ * Author: Ajit Pal Singh <ajitpal.singh@st.com>
+ *
+ * Copyright (C) 2003-2014 STMicroelectronics (R&D) Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/of.h>
+#include <linux/module.h>
+
+#include "st_thermal.h"
+
+#define STIH416_MPE_CONF 0x0
+#define STIH416_MPE_STATUS 0x4
+#define STIH416_MPE_INT_THRESH 0x8
+#define STIH416_MPE_INT_EN 0xC
+
+/* Power control bits for the memory mapped thermal sensor */
+#define THERMAL_PDN BIT(4)
+#define THERMAL_SRSTN BIT(10)
+
+static const struct reg_field st_mmap_thermal_regfields[MAX_REGFIELDS] = {
+ /*
+ * According to the STIH416 MPE temp sensor data sheet -
+ * the PDN (Power Down Bit) and SRSTN (Soft Reset Bit) need to be
+ * written simultaneously for powering on and off the temperature
+ * sensor. regmap_update_bits() will be used to update the register.
+ */
+ [INT_THRESH_HI] = REG_FIELD(STIH416_MPE_INT_THRESH, 0, 7),
+ [DCORRECT] = REG_FIELD(STIH416_MPE_CONF, 5, 9),
+ [OVERFLOW] = REG_FIELD(STIH416_MPE_STATUS, 9, 9),
+ [DATA] = REG_FIELD(STIH416_MPE_STATUS, 11, 18),
+ [INT_ENABLE] = REG_FIELD(STIH416_MPE_INT_EN, 0, 0),
+};
+
+static irqreturn_t st_mmap_thermal_trip_handler(int irq, void *sdata)
+{
+ struct st_thermal_sensor *sensor = sdata;
+
+ thermal_zone_device_update(sensor->thermal_dev);
+
+ return IRQ_HANDLED;
+}
+
+/* Private ops for the Memory Mapped based thermal sensors */
+static int st_mmap_power_ctrl(struct st_thermal_sensor *sensor,
+ enum st_thermal_power_state power_state)
+{
+ const unsigned int mask = (THERMAL_PDN | THERMAL_SRSTN);
+ const unsigned int val = power_state ? mask : 0;
+
+ return regmap_update_bits(sensor->regmap, STIH416_MPE_CONF, mask, val);
+}
+
+static int st_mmap_alloc_regfields(struct st_thermal_sensor *sensor)
+{
+ struct device *dev = sensor->dev;
+ struct regmap *regmap = sensor->regmap;
+ const struct reg_field *reg_fields = sensor->cdata->reg_fields;
+
+ sensor->int_thresh_hi = devm_regmap_field_alloc(dev, regmap,
+ reg_fields[INT_THRESH_HI]);
+ sensor->int_enable = devm_regmap_field_alloc(dev, regmap,
+ reg_fields[INT_ENABLE]);
+
+ if (IS_ERR(sensor->int_thresh_hi) || IS_ERR(sensor->int_enable)) {
+ dev_err(dev, "failed to alloc mmap regfields\n");
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int st_mmap_enable_irq(struct st_thermal_sensor *sensor)
+{
+ int ret;
+
+ /* Set upper critical threshold */
+ ret = regmap_field_write(sensor->int_thresh_hi,
+ sensor->cdata->crit_temp -
+ sensor->cdata->temp_adjust_val);
+ if (ret)
+ return ret;
+
+ return regmap_field_write(sensor->int_enable, 1);
+}
+
+static int st_mmap_register_enable_irq(struct st_thermal_sensor *sensor)
+{
+ struct device *dev = sensor->dev;
+ struct platform_device *pdev = to_platform_device(dev);
+ int ret;
+
+ sensor->irq = platform_get_irq(pdev, 0);
+ if (sensor->irq < 0) {
+ dev_err(dev, "failed to register IRQ\n");
+ return sensor->irq;
+ }
+
+ ret = devm_request_threaded_irq(dev, sensor->irq,
+ NULL, st_mmap_thermal_trip_handler,
+ IRQF_TRIGGER_RISING | IRQF_ONESHOT,
+ dev->driver->name, sensor);
+ if (ret) {
+ dev_err(dev, "failed to register IRQ %d\n", sensor->irq);
+ return ret;
+ }
+
+ return st_mmap_enable_irq(sensor);
+}
+
+static const struct regmap_config st_416mpe_regmap_config = {
+ .reg_bits = 32,
+ .val_bits = 32,
+ .reg_stride = 4,
+};
+
+static int st_mmap_regmap_init(struct st_thermal_sensor *sensor)
+{
+ struct device *dev = sensor->dev;
+ struct platform_device *pdev = to_platform_device(dev);
+ struct resource *res;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res) {
+ dev_err(dev, "no memory resources defined\n");
+ return -ENODEV;
+ }
+
+ sensor->mmio_base = devm_ioremap_resource(dev, res);
+ if (IS_ERR(sensor->mmio_base)) {
+ dev_err(dev, "failed to remap IO\n");
+ return PTR_ERR(sensor->mmio_base);
+ }
+
+ sensor->regmap = devm_regmap_init_mmio(dev, sensor->mmio_base,
+ &st_416mpe_regmap_config);
+ if (IS_ERR(sensor->regmap)) {
+ dev_err(dev, "failed to initialise regmap\n");
+ return PTR_ERR(sensor->regmap);
+ }
+
+ return 0;
+}
+
+static const struct st_thermal_sensor_ops st_mmap_sensor_ops = {
+ .power_ctrl = st_mmap_power_ctrl,
+ .alloc_regfields = st_mmap_alloc_regfields,
+ .regmap_init = st_mmap_regmap_init,
+ .register_enable_irq = st_mmap_register_enable_irq,
+ .enable_irq = st_mmap_enable_irq,
+};
+
+/* Compatible device data stih416 mpe thermal sensor */
+const struct st_thermal_compat_data st_416mpe_cdata = {
+ .reg_fields = st_mmap_thermal_regfields,
+ .ops = &st_mmap_sensor_ops,
+ .calibration_val = 14,
+ .temp_adjust_val = -95,
+ .crit_temp = 120,
+};
+
+/* Compatible device data stih407 thermal sensor */
+const struct st_thermal_compat_data st_407_cdata = {
+ .reg_fields = st_mmap_thermal_regfields,
+ .ops = &st_mmap_sensor_ops,
+ .calibration_val = 16,
+ .temp_adjust_val = -95,
+ .crit_temp = 120,
+};
+
+static struct of_device_id st_mmap_thermal_of_match[] = {
+ { .compatible = "st,stih416-mpe-thermal", .data = &st_416mpe_cdata },
+ { .compatible = "st,stih407-thermal", .data = &st_407_cdata },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, st_mmap_thermal_of_match);
+
+int st_mmap_probe(struct platform_device *pdev)
+{
+ return st_thermal_register(pdev, st_mmap_thermal_of_match);
+}
+
+int st_mmap_remove(struct platform_device *pdev)
+{
+ return st_thermal_unregister(pdev);
+}
+
+static struct platform_driver st_mmap_thermal_driver = {
+ .driver = {
+ .name = "st_thermal_mmap",
+ .owner = THIS_MODULE,
+ .pm = &st_thermal_pm_ops,
+ .of_match_table = st_mmap_thermal_of_match,
+ },
+ .probe = st_mmap_probe,
+ .remove = st_mmap_remove,
+};
+
+module_platform_driver(st_mmap_thermal_driver);
+
+MODULE_AUTHOR("STMicroelectronics (R&D) Limited <ajitpal.singh@st.com>");
+MODULE_DESCRIPTION("STMicroelectronics STi SoC Thermal Sensor Driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/thermal/st/st_thermal_syscfg.c b/drivers/thermal/st/st_thermal_syscfg.c
new file mode 100644
index 00000000000..888b58e6409
--- /dev/null
+++ b/drivers/thermal/st/st_thermal_syscfg.c
@@ -0,0 +1,179 @@
+/*
+ * ST Thermal Sensor Driver for syscfg based sensors.
+ * Author: Ajit Pal Singh <ajitpal.singh@st.com>
+ *
+ * Copyright (C) 2003-2014 STMicroelectronics (R&D) Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/of.h>
+#include <linux/module.h>
+#include <linux/mfd/syscon.h>
+
+#include "st_thermal.h"
+
+/* STiH415 */
+#define STIH415_SYSCFG_FRONT(num) ((num - 100) * 4)
+#define STIH415_SAS_THSENS_CONF STIH415_SYSCFG_FRONT(178)
+#define STIH415_SAS_THSENS_STATUS STIH415_SYSCFG_FRONT(198)
+#define STIH415_SYSCFG_MPE(num) ((num - 600) * 4)
+#define STIH415_MPE_THSENS_CONF STIH415_SYSCFG_MPE(607)
+#define STIH415_MPE_THSENS_STATUS STIH415_SYSCFG_MPE(667)
+
+/* STiH416 */
+#define STIH416_SYSCFG_FRONT(num) ((num - 1000) * 4)
+#define STIH416_SAS_THSENS_CONF STIH416_SYSCFG_FRONT(1552)
+#define STIH416_SAS_THSENS_STATUS1 STIH416_SYSCFG_FRONT(1554)
+#define STIH416_SAS_THSENS_STATUS2 STIH416_SYSCFG_FRONT(1594)
+
+/* STiD127 */
+#define STID127_SYSCFG_CPU(num) ((num - 700) * 4)
+#define STID127_THSENS_CONF STID127_SYSCFG_CPU(743)
+#define STID127_THSENS_STATUS STID127_SYSCFG_CPU(767)
+
+static const struct reg_field st_415sas_regfields[MAX_REGFIELDS] = {
+ [TEMP_PWR] = REG_FIELD(STIH415_SAS_THSENS_CONF, 9, 9),
+ [DCORRECT] = REG_FIELD(STIH415_SAS_THSENS_CONF, 4, 8),
+ [OVERFLOW] = REG_FIELD(STIH415_SAS_THSENS_STATUS, 8, 8),
+ [DATA] = REG_FIELD(STIH415_SAS_THSENS_STATUS, 10, 16),
+};
+
+static const struct reg_field st_415mpe_regfields[MAX_REGFIELDS] = {
+ [TEMP_PWR] = REG_FIELD(STIH415_MPE_THSENS_CONF, 8, 8),
+ [DCORRECT] = REG_FIELD(STIH415_MPE_THSENS_CONF, 3, 7),
+ [OVERFLOW] = REG_FIELD(STIH415_MPE_THSENS_STATUS, 9, 9),
+ [DATA] = REG_FIELD(STIH415_MPE_THSENS_STATUS, 11, 18),
+};
+
+static const struct reg_field st_416sas_regfields[MAX_REGFIELDS] = {
+ [TEMP_PWR] = REG_FIELD(STIH416_SAS_THSENS_CONF, 9, 9),
+ [DCORRECT] = REG_FIELD(STIH416_SAS_THSENS_CONF, 4, 8),
+ [OVERFLOW] = REG_FIELD(STIH416_SAS_THSENS_STATUS1, 8, 8),
+ [DATA] = REG_FIELD(STIH416_SAS_THSENS_STATUS2, 10, 16),
+};
+
+static const struct reg_field st_127_regfields[MAX_REGFIELDS] = {
+ [TEMP_PWR] = REG_FIELD(STID127_THSENS_CONF, 7, 7),
+ [DCORRECT] = REG_FIELD(STID127_THSENS_CONF, 2, 6),
+ [OVERFLOW] = REG_FIELD(STID127_THSENS_STATUS, 9, 9),
+ [DATA] = REG_FIELD(STID127_THSENS_STATUS, 11, 18),
+};
+
+/* Private OPs for System Configuration Register based thermal sensors */
+static int st_syscfg_power_ctrl(struct st_thermal_sensor *sensor,
+ enum st_thermal_power_state power_state)
+{
+ return regmap_field_write(sensor->pwr, power_state);
+}
+
+static int st_syscfg_alloc_regfields(struct st_thermal_sensor *sensor)
+{
+ struct device *dev = sensor->dev;
+
+ sensor->pwr = devm_regmap_field_alloc(dev, sensor->regmap,
+ sensor->cdata->reg_fields[TEMP_PWR]);
+
+ if (IS_ERR(sensor->pwr)) {
+ dev_err(dev, "failed to alloc syscfg regfields\n");
+ return PTR_ERR(sensor->pwr);
+ }
+
+ return 0;
+}
+
+static int st_syscfg_regmap_init(struct st_thermal_sensor *sensor)
+{
+ sensor->regmap =
+ syscon_regmap_lookup_by_compatible(sensor->cdata->sys_compat);
+ if (IS_ERR(sensor->regmap)) {
+ dev_err(sensor->dev, "failed to find syscfg regmap\n");
+ return PTR_ERR(sensor->regmap);
+ }
+
+ return 0;
+}
+
+static const struct st_thermal_sensor_ops st_syscfg_sensor_ops = {
+ .power_ctrl = st_syscfg_power_ctrl,
+ .alloc_regfields = st_syscfg_alloc_regfields,
+ .regmap_init = st_syscfg_regmap_init,
+};
+
+/* Compatible device data for stih415 sas thermal sensor */
+const struct st_thermal_compat_data st_415sas_cdata = {
+ .sys_compat = "st,stih415-front-syscfg",
+ .reg_fields = st_415sas_regfields,
+ .ops = &st_syscfg_sensor_ops,
+ .calibration_val = 16,
+ .temp_adjust_val = 20,
+ .crit_temp = 120,
+};
+
+/* Compatible device data for stih415 mpe thermal sensor */
+const struct st_thermal_compat_data st_415mpe_cdata = {
+ .sys_compat = "st,stih415-system-syscfg",
+ .reg_fields = st_415mpe_regfields,
+ .ops = &st_syscfg_sensor_ops,
+ .calibration_val = 16,
+ .temp_adjust_val = -103,
+ .crit_temp = 120,
+};
+
+/* Compatible device data for stih416 sas thermal sensor */
+const struct st_thermal_compat_data st_416sas_cdata = {
+ .sys_compat = "st,stih416-front-syscfg",
+ .reg_fields = st_416sas_regfields,
+ .ops = &st_syscfg_sensor_ops,
+ .calibration_val = 16,
+ .temp_adjust_val = 20,
+ .crit_temp = 120,
+};
+
+/* Compatible device data for stid127 thermal sensor */
+const struct st_thermal_compat_data st_127_cdata = {
+ .sys_compat = "st,stid127-cpu-syscfg",
+ .reg_fields = st_127_regfields,
+ .ops = &st_syscfg_sensor_ops,
+ .calibration_val = 8,
+ .temp_adjust_val = -103,
+ .crit_temp = 120,
+};
+
+static struct of_device_id st_syscfg_thermal_of_match[] = {
+ { .compatible = "st,stih415-sas-thermal", .data = &st_415sas_cdata },
+ { .compatible = "st,stih415-mpe-thermal", .data = &st_415mpe_cdata },
+ { .compatible = "st,stih416-sas-thermal", .data = &st_416sas_cdata },
+ { .compatible = "st,stid127-thermal", .data = &st_127_cdata },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, st_syscfg_thermal_of_match);
+
+int st_syscfg_probe(struct platform_device *pdev)
+{
+ return st_thermal_register(pdev, st_syscfg_thermal_of_match);
+}
+
+int st_syscfg_remove(struct platform_device *pdev)
+{
+ return st_thermal_unregister(pdev);
+}
+
+static struct platform_driver st_syscfg_thermal_driver = {
+ .driver = {
+ .name = "st_syscfg_thermal",
+ .owner = THIS_MODULE,
+ .pm = &st_thermal_pm_ops,
+ .of_match_table = st_syscfg_thermal_of_match,
+ },
+ .probe = st_syscfg_probe,
+ .remove = st_syscfg_remove,
+};
+module_platform_driver(st_syscfg_thermal_driver);
+
+MODULE_AUTHOR("STMicroelectronics (R&D) Limited <ajitpal.singh@st.com>");
+MODULE_DESCRIPTION("STMicroelectronics STi SoC Thermal Sensor Driver");
+MODULE_LICENSE("GPL v2");
diff --git a/include/linux/thermal.h b/include/linux/thermal.h
index f7e11c7ea7d..0305cde21a7 100644
--- a/include/linux/thermal.h
+++ b/include/linux/thermal.h
@@ -158,6 +158,42 @@ struct thermal_attr {
char name[THERMAL_NAME_LENGTH];
};
+/**
+ * struct thermal_zone_device - structure for a thermal zone
+ * @id: unique id number for each thermal zone
+ * @type: the thermal zone device type
+ * @device: &struct device for this thermal zone
+ * @trip_temp_attrs: attributes for trip points for sysfs: trip temperature
+ * @trip_type_attrs: attributes for trip points for sysfs: trip type
+ * @trip_hyst_attrs: attributes for trip points for sysfs: trip hysteresis
+ * @devdata: private pointer for device private data
+ * @trips: number of trip points the thermal zone supports
+ * @passive_delay: number of milliseconds to wait between polls when
+ * performing passive cooling. Currenty only used by the
+ * step-wise governor
+ * @polling_delay: number of milliseconds to wait between polls when
+ * checking whether trip points have been crossed (0 for
+ * interrupt driven systems)
+ * @temperature: current temperature. This is only for core code,
+ * drivers should use thermal_zone_get_temp() to get the
+ * current temperature
+ * @last_temperature: previous temperature read
+ * @emul_temperature: emulated temperature when using CONFIG_THERMAL_EMULATION
+ * @passive: 1 if you've crossed a passive trip point, 0 otherwise.
+ * Currenty only used by the step-wise governor.
+ * @forced_passive: If > 0, temperature at which to switch on all ACPI
+ * processor cooling devices. Currently only used by the
+ * step-wise governor.
+ * @ops: operations this &thermal_zone_device supports
+ * @tzp: thermal zone parameters
+ * @governor: pointer to the governor for this thermal zone
+ * @thermal_instances: list of &struct thermal_instance of this thermal zone
+ * @idr: &struct idr to generate unique id for this zone's cooling
+ * devices
+ * @lock: lock to protect thermal_instances list
+ * @node: node in thermal_tz_list (in thermal_core.c)
+ * @poll_queue: delayed work for polling
+ */
struct thermal_zone_device {
int id;
char type[THERMAL_NAME_LENGTH];
@@ -179,12 +215,18 @@ struct thermal_zone_device {
struct thermal_governor *governor;
struct list_head thermal_instances;
struct idr idr;
- struct mutex lock; /* protect thermal_instances list */
+ struct mutex lock;
struct list_head node;
struct delayed_work poll_queue;
};
-/* Structure that holds thermal governor information */
+/**
+ * struct thermal_governor - structure that holds thermal governor information
+ * @name: name of the governor
+ * @throttle: callback called for every trip point even if temperature is
+ * below the trip point temperature
+ * @governor_list: node in thermal_governor_list (in thermal_core.c)
+ */
struct thermal_governor {
char name[THERMAL_NAME_LENGTH];
int (*throttle)(struct thermal_zone_device *tz, int trip);