ARM: imx5x: clean up ARCH_MX5X

Move to SOC_SOC_IMX5X. Leave only places which prevent multi-soc
using ARCH_MX5X.

Signed-off-by: Richard Zhao <richard.zhao@freescale.com>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

6 files changed, 12 insertions, 11 deletions

diff --git a/arch/arm/mach-mx5/Kconfig b/arch/arm/mach-mx5/Kconfig
index 03ec6e90bb4..83ee08847d4 100644
--- a/arch/arm/mach-mx5/Kconfig
+++ b/arch/arm/mach-mx5/Kconfig
@@ -1,5 +1,6 @@
 if ARCH_MX5
-# ARCH_MX51 and ARCH_MX50 are left for compatibility
+# ARCH_MX50/51/53 are left to mark places where prevent multi-soc in single
+# image. So for most time, SOC_IMX50/51/53 should be used.
 
 config ARCH_MX50
 	bool
diff --git a/arch/arm/plat-mxc/devices/platform-imx-dma.c b/arch/arm/plat-mxc/devices/platform-imx-dma.c
index 33530d2d5ed..be7df13ad23 100644
--- a/arch/arm/plat-mxc/devices/platform-imx-dma.c
+++ b/arch/arm/plat-mxc/devices/platform-imx-dma.c
@@ -194,7 +194,7 @@ static int __init imxXX_add_imx_dma(void)
 	} else
 #endif
 
-#if defined(CONFIG_ARCH_MX51)
+#if defined(CONFIG_SOC_IMX51)
 	if (cpu_is_mx51()) {
 		imx51_imx_sdma_data.pdata.script_addrs = &addr_imx51_to1;
 		ret = imx_add_imx_sdma(&imx51_imx_sdma_data);
diff --git a/arch/arm/plat-mxc/include/mach/irqs.h b/arch/arm/plat-mxc/include/mach/irqs.h
index ba65c9231a7..a3d930d3e65 100644
--- a/arch/arm/plat-mxc/include/mach/irqs.h
+++ b/arch/arm/plat-mxc/include/mach/irqs.h
@@ -23,17 +23,17 @@
 #define MXC_GPIO_IRQ_START	MXC_INTERNAL_IRQS
 
 /* these are ordered by size to support multi-SoC kernels */
-#if defined CONFIG_ARCH_MX53
+#if defined CONFIG_SOC_IMX53
 #define MXC_GPIO_IRQS		(32 * 7)
 #elif defined CONFIG_ARCH_MX2
 #define MXC_GPIO_IRQS		(32 * 6)
-#elif defined CONFIG_ARCH_MX50
+#elif defined CONFIG_SOC_IMX50
 #define MXC_GPIO_IRQS		(32 * 6)
 #elif defined CONFIG_ARCH_MX1
 #define MXC_GPIO_IRQS		(32 * 4)
 #elif defined CONFIG_ARCH_MX25
 #define MXC_GPIO_IRQS		(32 * 4)
-#elif defined CONFIG_ARCH_MX51
+#elif defined CONFIG_SOC_IMX51
 #define MXC_GPIO_IRQS		(32 * 4)
 #elif defined CONFIG_ARCH_MXC91231
 #define MXC_GPIO_IRQS		(32 * 4)
diff --git a/arch/arm/plat-mxc/include/mach/mxc.h b/arch/arm/plat-mxc/include/mach/mxc.h
index 04c7a26b1f2..3781f2f2425 100644
--- a/arch/arm/plat-mxc/include/mach/mxc.h
+++ b/arch/arm/plat-mxc/include/mach/mxc.h
@@ -127,7 +127,7 @@ extern unsigned int __mxc_cpu_type;
 # define cpu_is_mx35()		(0)
 #endif
 
-#ifdef CONFIG_ARCH_MX50
+#ifdef CONFIG_SOC_IMX50
 # ifdef mxc_cpu_type
 #  undef mxc_cpu_type
 #  define mxc_cpu_type __mxc_cpu_type
@@ -139,7 +139,7 @@ extern unsigned int __mxc_cpu_type;
 # define cpu_is_mx50()		(0)
 #endif
 
-#ifdef CONFIG_ARCH_MX51
+#ifdef CONFIG_SOC_IMX51
 # ifdef mxc_cpu_type
 #  undef mxc_cpu_type
 #  define mxc_cpu_type __mxc_cpu_type
@@ -151,7 +151,7 @@ extern unsigned int __mxc_cpu_type;
 # define cpu_is_mx51()		(0)
 #endif
 
-#ifdef CONFIG_ARCH_MX53
+#ifdef CONFIG_SOC_IMX53
 # ifdef mxc_cpu_type
 #  undef mxc_cpu_type
 #  define mxc_cpu_type __mxc_cpu_type
diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
index c89592239bc..450afc5df0b 100644
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -476,7 +476,7 @@ config MTD_NAND_MPC5121_NFC
 
 config MTD_NAND_MXC
 	tristate "MXC NAND support"
-	depends on ARCH_MX2 || ARCH_MX25 || ARCH_MX3 || ARCH_MX51
+	depends on IMX_HAVE_PLATFORM_MXC_NAND
 	help
 	  This enables the driver for the NAND flash controller on the
 	  MXC processors.
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index bb233a9cbad..9f9d3f7859f 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -164,10 +164,10 @@ config SPI_IMX_VER_0_4
 	def_bool y if ARCH_MX31
 
 config SPI_IMX_VER_0_7
-	def_bool y if ARCH_MX25 || ARCH_MX35 || ARCH_MX51 || ARCH_MX53
+	def_bool y if ARCH_MX25 || ARCH_MX35 || SOC_IMX51 || SOC_IMX53
 
 config SPI_IMX_VER_2_3
-	def_bool y if ARCH_MX51 || ARCH_MX53
+	def_bool y if SOC_IMX51 || SOC_IMX53
 
 config SPI_IMX
 	tristate "Freescale i.MX SPI controllers"