Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/i2c-2.6

5 files changed, 24 insertions, 33 deletions

diff --git a/Documentation/i2c/busses/i2c-viapro b/Documentation/i2c/busses/i2c-viapro
index 9363b8bd610..16775663b9f 100644
--- a/Documentation/i2c/busses/i2c-viapro
+++ b/Documentation/i2c/busses/i2c-viapro
@@ -7,12 +7,10 @@ Supported adapters:
   * VIA Technologies, Inc. VT82C686A/B
     Datasheet: Sometimes available at the VIA website
 
-  * VIA Technologies, Inc. VT8231, VT8233, VT8233A, VT8235, VT8237
-    Datasheet: available on request from Via
+  * VIA Technologies, Inc. VT8231, VT8233, VT8233A, VT8235, VT8237R
+    Datasheet: available on request from VIA
 
 Authors:
-	Frodo Looijaard <frodol@dds.nl>,
-	Philip Edelbrock <phil@netroedge.com>,
 	Kyösti Mälkki <kmalkki@cc.hut.fi>,
 	Mark D. Studebaker <mdsxyz123@yahoo.com>,
 	Jean Delvare <khali@linux-fr.org>
diff --git a/Documentation/i2c/writing-clients b/Documentation/i2c/writing-clients
index cff7b652588..d19993cc060 100644
--- a/Documentation/i2c/writing-clients
+++ b/Documentation/i2c/writing-clients
@@ -412,7 +412,7 @@ For now, you can ignore the `flags' parameter. It is there for future use.
         release_region(address,FOO_EXTENT);
     /* SENSORS ONLY END */
     ERROR1:
-      kfree(new_client);
+      kfree(data);
     ERROR0:
       return err;
   }
@@ -443,7 +443,7 @@ much simpler than the attachment code, fortunately!
       release_region(client->addr,LM78_EXTENT);
     /* HYBRID SENSORS CHIP ONLY END */
 
-    kfree(data);
+    kfree(i2c_get_clientdata(client));
     return 0;
   }
 
diff --git a/drivers/hwmon/w83627hf.c b/drivers/hwmon/w83627hf.c
index 70ef926c3bd..4e9a04e1f08 100644
--- a/drivers/hwmon/w83627hf.c
+++ b/drivers/hwmon/w83627hf.c
@@ -180,11 +180,10 @@ superio_exit(void)
 #define W83781D_REG_BANK 0x4E
 
 #define W83781D_REG_CONFIG 0x40
-#define W83781D_REG_ALARM1 0x41
-#define W83781D_REG_ALARM2 0x42
-#define W83781D_REG_ALARM3 0x450
+#define W83781D_REG_ALARM1 0x459
+#define W83781D_REG_ALARM2 0x45A
+#define W83781D_REG_ALARM3 0x45B
 
-#define W83781D_REG_IRQ 0x4C
 #define W83781D_REG_BEEP_CONFIG 0x4D
 #define W83781D_REG_BEEP_INTS1 0x56
 #define W83781D_REG_BEEP_INTS2 0x57
@@ -1370,13 +1369,6 @@ static void w83627hf_init_client(struct i2c_client *client)
 					W83781D_REG_TEMP3_CONFIG, tmp & 0xfe);
 			}
 		}
-
-		/* enable comparator mode for temp2 and temp3 so
-	           alarm indication will work correctly */
-		i = w83627hf_read_value(client, W83781D_REG_IRQ);
-		if (!(i & 0x40))
-			w83627hf_write_value(client, W83781D_REG_IRQ,
-					    i | 0x40);
 	}
 
 	/* Start monitoring */
@@ -1400,7 +1392,7 @@ static struct w83627hf_data *w83627hf_update_device(struct device *dev)
 			/* skip missing sensors */
 			if (((data->type == w83697hf) && (i == 1)) ||
 			    ((data->type == w83627thf || data->type == w83637hf)
-			    && (i == 4 || i == 5)))
+			    && (i == 5 || i == 6)))
 				continue;
 			data->in[i] =
 			    w83627hf_read_value(client, W83781D_REG_IN(i));
diff --git a/drivers/i2c/busses/i2c-viapro.c b/drivers/i2c/busses/i2c-viapro.c
index c9366b50483..a2237d4b2cf 100644
--- a/drivers/i2c/busses/i2c-viapro.c
+++ b/drivers/i2c/busses/i2c-viapro.c
@@ -142,19 +142,18 @@ static int vt596_transaction(u8 size)
 	/* Make sure the SMBus host is ready to start transmitting */
 	if ((temp = inb_p(SMBHSTSTS)) & 0x1F) {
 		dev_dbg(&vt596_adapter.dev, "SMBus busy (0x%02x). "
-			"Resetting... ", temp);
+			"Resetting...\n", temp);
 
 		outb_p(temp, SMBHSTSTS);
 		if ((temp = inb_p(SMBHSTSTS)) & 0x1F) {
-			printk("Failed! (0x%02x)\n", temp);
+			dev_err(&vt596_adapter.dev, "SMBus reset failed! "
+				"(0x%02x)\n", temp);
 			return -1;
-		} else {
-			printk("Successful!\n");
 		}
 	}
 
 	/* Start the transaction by setting bit 6 */
-	outb_p(0x40 | (size & 0x3C), SMBHSTCNT);
+	outb_p(0x40 | size, SMBHSTCNT);
 
 	/* We will always wait for a fraction of a second */
 	do {
@@ -171,7 +170,7 @@ static int vt596_transaction(u8 size)
 	if (temp & 0x10) {
 		result = -1;
 		dev_err(&vt596_adapter.dev, "Transaction failed (0x%02x)\n",
-			inb_p(SMBHSTCNT) & 0x3C);
+			size);
 	}
 
 	if (temp & 0x08) {
@@ -180,11 +179,13 @@ static int vt596_transaction(u8 size)
 	}
 
 	if (temp & 0x04) {
+		int read = inb_p(SMBHSTADD) & 0x01;
 		result = -1;
-		/* Quick commands are used to probe for chips, so
-		   errors are expected, and we don't want to frighten the
-		   user. */
-		if ((inb_p(SMBHSTCNT) & 0x3C) != VT596_QUICK)
+		/* The quick and receive byte commands are used to probe
+		   for chips, so errors are expected, and we don't want
+		   to frighten the user. */
+		if (!((size == VT596_QUICK && !read) ||
+		      (size == VT596_BYTE && read)))
 			dev_err(&vt596_adapter.dev, "Transaction error!\n");
 	}
 
@@ -462,9 +463,9 @@ static void __exit i2c_vt596_exit(void)
 	}
 }
 
-MODULE_AUTHOR(
-    "Frodo Looijaard <frodol@dds.nl> and "
-    "Philip Edelbrock <phil@netroedge.com>");
+MODULE_AUTHOR("Kyosti Malkki <kmalkki@cc.hut.fi>, "
+	      "Mark D. Studebaker <mdsxyz123@yahoo.com> and "
+	      "Jean Delvare <khali@linux-fr.org>");
 MODULE_DESCRIPTION("vt82c596 SMBus driver");
 MODULE_LICENSE("GPL");
 
diff --git a/drivers/i2c/chips/ds1337.c b/drivers/i2c/chips/ds1337.c
index 01b03700741..02682fb794c 100644
--- a/drivers/i2c/chips/ds1337.c
+++ b/drivers/i2c/chips/ds1337.c
@@ -164,9 +164,9 @@ static int ds1337_set_datetime(struct i2c_client *client, struct rtc_time *dt)
 	buf[1] = BIN2BCD(dt->tm_sec);
 	buf[2] = BIN2BCD(dt->tm_min);
 	buf[3] = BIN2BCD(dt->tm_hour);
-	buf[4] = BIN2BCD(dt->tm_wday) + 1;
+	buf[4] = BIN2BCD(dt->tm_wday + 1);
 	buf[5] = BIN2BCD(dt->tm_mday);
-	buf[6] = BIN2BCD(dt->tm_mon) + 1;
+	buf[6] = BIN2BCD(dt->tm_mon + 1);
 	val = dt->tm_year;
 	if (val >= 100) {
 		val -= 100;