Pull input changes from Henrik Rydberg, including large update to

atmel_mxt_ts driver by Daniel and MT protocol addition for win8 devices.

Conflicts:
	drivers/input/touchscreen/atmel_mxt_ts.c

4 files changed, 339 insertions, 252 deletions

diff --git a/Documentation/input/multi-touch-protocol.txt b/Documentation/input/multi-touch-protocol.txt
index 543101c5bf2..2c179613f81 100644
--- a/Documentation/input/multi-touch-protocol.txt
+++ b/Documentation/input/multi-touch-protocol.txt
@@ -162,26 +162,48 @@ are divided into categories, to allow for partial implementation.  The
 minimum set consists of ABS_MT_POSITION_X and ABS_MT_POSITION_Y, which
 allows for multiple contacts to be tracked.  If the device supports it, the
 ABS_MT_TOUCH_MAJOR and ABS_MT_WIDTH_MAJOR may be used to provide the size
-of the contact area and approaching contact, respectively.
+of the contact area and approaching tool, respectively.
 
 The TOUCH and WIDTH parameters have a geometrical interpretation; imagine
 looking through a window at someone gently holding a finger against the
 glass.  You will see two regions, one inner region consisting of the part
 of the finger actually touching the glass, and one outer region formed by
-the perimeter of the finger. The diameter of the inner region is the
-ABS_MT_TOUCH_MAJOR, the diameter of the outer region is
-ABS_MT_WIDTH_MAJOR. Now imagine the person pressing the finger harder
-against the glass. The inner region will increase, and in general, the
-ratio ABS_MT_TOUCH_MAJOR / ABS_MT_WIDTH_MAJOR, which is always smaller than
-unity, is related to the contact pressure. For pressure-based devices,
+the perimeter of the finger. The center of the touching region (a) is
+ABS_MT_POSITION_X/Y and the center of the approaching finger (b) is
+ABS_MT_TOOL_X/Y. The touch diameter is ABS_MT_TOUCH_MAJOR and the finger
+diameter is ABS_MT_WIDTH_MAJOR. Now imagine the person pressing the finger
+harder against the glass. The touch region will increase, and in general,
+the ratio ABS_MT_TOUCH_MAJOR / ABS_MT_WIDTH_MAJOR, which is always smaller
+than unity, is related to the contact pressure. For pressure-based devices,
 ABS_MT_PRESSURE may be used to provide the pressure on the contact area
 instead. Devices capable of contact hovering can use ABS_MT_DISTANCE to
 indicate the distance between the contact and the surface.
 
-In addition to the MAJOR parameters, the oval shape of the contact can be
-described by adding the MINOR parameters, such that MAJOR and MINOR are the
-major and minor axis of an ellipse. Finally, the orientation of the oval
-shape can be describe with the ORIENTATION parameter.
+
+	  Linux MT                               Win8
+         __________                     _______________________
+        /          \                   |                       |
+       /            \                  |                       |
+      /     ____     \                 |                       |
+     /     /    \     \                |                       |
+     \     \  a  \     \               |       a               |
+      \     \____/      \              |                       |
+       \                 \             |                       |
+        \        b        \            |           b           |
+         \                 \           |                       |
+          \                 \          |                       |
+           \                 \         |                       |
+            \                /         |                       |
+             \              /          |                       |
+              \            /           |                       |
+               \__________/            |_______________________|
+
+
+In addition to the MAJOR parameters, the oval shape of the touch and finger
+regions can be described by adding the MINOR parameters, such that MAJOR
+and MINOR are the major and minor axis of an ellipse. The orientation of
+the touch ellipse can be described with the ORIENTATION parameter, and the
+direction of the finger ellipse is given by the vector (a - b).
 
 For type A devices, further specification of the touch shape is possible
 via ABS_MT_BLOB_ID.
@@ -224,7 +246,7 @@ tool. Omit if circular [4].
 The above four values can be used to derive additional information about
 the contact. The ratio ABS_MT_TOUCH_MAJOR / ABS_MT_WIDTH_MAJOR approximates
 the notion of pressure. The fingers of the hand and the palm all have
-different characteristic widths [1].
+different characteristic widths.
 
 ABS_MT_PRESSURE
 
@@ -240,17 +262,24 @@ the contact is hovering above the surface.
 
 ABS_MT_ORIENTATION
 
-The orientation of the ellipse. The value should describe a signed quarter
-of a revolution clockwise around the touch center. The signed value range
-is arbitrary, but zero should be returned for a finger aligned along the Y
-axis of the surface, a negative value when finger is turned to the left, and
-a positive value when finger turned to the right. When completely aligned with
-the X axis, the range max should be returned.  Orientation can be omitted
-if the touching object is circular, or if the information is not available
-in the kernel driver. Partial orientation support is possible if the device
-can distinguish between the two axis, but not (uniquely) any values in
-between. In such cases, the range of ABS_MT_ORIENTATION should be [0, 1]
-[4].
+The orientation of the touching ellipse. The value should describe a signed
+quarter of a revolution clockwise around the touch center. The signed value
+range is arbitrary, but zero should be returned for an ellipse aligned with
+the Y axis of the surface, a negative value when the ellipse is turned to
+the left, and a positive value when the ellipse is turned to the
+right. When completely aligned with the X axis, the range max should be
+returned.
+
+Touch ellipsis are symmetrical by default. For devices capable of true 360
+degree orientation, the reported orientation must exceed the range max to
+indicate more than a quarter of a revolution. For an upside-down finger,
+range max * 2 should be returned.
+
+Orientation can be omitted if the touch area is circular, or if the
+information is not available in the kernel driver. Partial orientation
+support is possible if the device can distinguish between the two axis, but
+not (uniquely) any values in between. In such cases, the range of
+ABS_MT_ORIENTATION should be [0, 1] [4].
 
 ABS_MT_POSITION_X
 
@@ -260,6 +289,23 @@ ABS_MT_POSITION_Y
 
 The surface Y coordinate of the center of the touching ellipse.
 
+ABS_MT_TOOL_X
+
+The surface X coordinate of the center of the approaching tool. Omit if
+the device cannot distinguish between the intended touch point and the
+tool itself.
+
+ABS_MT_TOOL_Y
+
+The surface Y coordinate of the center of the approaching tool. Omit if the
+device cannot distinguish between the intended touch point and the tool
+itself.
+
+The four position values can be used to separate the position of the touch
+from the position of the tool. If both positions are present, the major
+tool axis points towards the touch point [1]. Otherwise, the tool axes are
+aligned with the touch axes.
+
 ABS_MT_TOOL_TYPE
 
 The type of approaching tool. A lot of kernel drivers cannot distinguish
@@ -305,6 +351,28 @@ The range of ABS_MT_ORIENTATION should be set to [0, 1], to indicate that
 the device can distinguish between a finger along the Y axis (0) and a
 finger along the X axis (1).
 
+For win8 devices with both T and C coordinates, the position mapping is
+
+   ABS_MT_POSITION_X := T_X
+   ABS_MT_POSITION_Y := T_Y
+   ABS_MT_TOOL_X := C_X
+   ABS_MT_TOOL_X := C_Y
+
+Unfortunately, there is not enough information to specify both the touching
+ellipse and the tool ellipse, so one has to resort to approximations.  One
+simple scheme, which is compatible with earlier usage, is:
+
+   ABS_MT_TOUCH_MAJOR := min(X, Y)
+   ABS_MT_TOUCH_MINOR := <not used>
+   ABS_MT_ORIENTATION := <not used>
+   ABS_MT_WIDTH_MAJOR := min(X, Y) + distance(T, C)
+   ABS_MT_WIDTH_MINOR := min(X, Y)
+
+Rationale: We have no information about the orientation of the touching
+ellipse, so approximate it with an inscribed circle instead. The tool
+ellipse should align with the the vector (T - C), so the diameter must
+increase with distance(T, C). Finally, assume that the touch diameter is
+equal to the tool thickness, and we arrive at the formulas above.
 
 Finger Tracking
 ---------------
@@ -338,9 +406,7 @@ subsequent events of the same type refer to different fingers.
 For example usage of the type A protocol, see the bcm5974 driver. For
 example usage of the type B protocol, see the hid-egalax driver.
 
-[1] With the extension ABS_MT_APPROACH_X and ABS_MT_APPROACH_Y, the
-difference between the contact position and the approaching tool position
-could be used to derive tilt.
+[1] Also, the difference (TOOL_X - POSITION_X) can be used to model tilt.
 [2] The list can of course be extended.
 [3] The mtdev project: http://bitmath.org/code/mtdev/.
 [4] See the section on event computation.
diff --git a/drivers/input/input-mt.c b/drivers/input/input-mt.c
index f658086fbbe..70a16c7da8c 100644
--- a/drivers/input/input-mt.c
+++ b/drivers/input/input-mt.c
@@ -135,7 +135,7 @@ EXPORT_SYMBOL(input_mt_report_finger_count);
  */
 void input_mt_report_pointer_emulation(struct input_dev *dev, bool use_count)
 {
-	struct input_mt_slot *oldest = 0;
+	struct input_mt_slot *oldest = NULL;
 	int oldid = dev->trkid;
 	int count = 0;
 	int i;
diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c
index 25fd0561a17..4623cc69fc6 100644
--- a/drivers/input/touchscreen/atmel_mxt_ts.c
+++ b/drivers/input/touchscreen/atmel_mxt_ts.c
@@ -36,6 +36,7 @@
 #define MXT_FW_NAME		"maxtouch.fw"
 
 /* Registers */
+#define MXT_INFO		0x00
 #define MXT_FAMILY_ID		0x00
 #define MXT_VARIANT_ID		0x01
 #define MXT_VERSION		0x02
@@ -194,6 +195,7 @@
 #define MXT_BOOT_STATUS_MASK	0x3f
 
 /* Touch status */
+#define MXT_UNGRIP		(1 << 0)
 #define MXT_SUPPRESS		(1 << 1)
 #define MXT_AMP			(1 << 2)
 #define MXT_VECTOR		(1 << 3)
@@ -210,8 +212,6 @@
 /* Touchscreen absolute values */
 #define MXT_MAX_AREA		0xff
 
-#define MXT_MAX_FINGER		10
-
 struct mxt_info {
 	u8 family_id;
 	u8 variant_id;
@@ -225,44 +225,37 @@ struct mxt_info {
 struct mxt_object {
 	u8 type;
 	u16 start_address;
-	u8 size;
-	u8 instances;
+	u8 size;		/* Size of each instance - 1 */
+	u8 instances;		/* Number of instances - 1 */
 	u8 num_report_ids;
-
-	/* to map object and message */
-	u8 max_reportid;
-};
+} __packed;
 
 struct mxt_message {
 	u8 reportid;
 	u8 message[7];
 };
 
-struct mxt_finger {
-	int status;
-	int x;
-	int y;
-	int area;
-	int pressure;
-};
-
 /* Each client has this additional data */
 struct mxt_data {
 	struct i2c_client *client;
 	struct input_dev *input_dev;
+	char phys[64];		/* device physical location */
 	const struct mxt_platform_data *pdata;
 	struct mxt_object *object_table;
 	struct mxt_info info;
-	struct mxt_finger finger[MXT_MAX_FINGER];
 	unsigned int irq;
 	unsigned int max_x;
 	unsigned int max_y;
+
+	/* Cached parameters from object table */
+	u8 T6_reportid;
+	u8 T9_reportid_min;
+	u8 T9_reportid_max;
 };
 
 static bool mxt_object_readable(unsigned int type)
 {
 	switch (type) {
-	case MXT_GEN_MESSAGE_T5:
 	case MXT_GEN_COMMAND_T6:
 	case MXT_GEN_POWER_T7:
 	case MXT_GEN_ACQUIRE_T8:
@@ -396,6 +389,7 @@ static int __mxt_read_reg(struct i2c_client *client,
 {
 	struct i2c_msg xfer[2];
 	u8 buf[2];
+	int ret;
 
 	buf[0] = reg & 0xff;
 	buf[1] = (reg >> 8) & 0xff;
@@ -412,12 +406,17 @@ static int __mxt_read_reg(struct i2c_client *client,
 	xfer[1].len = len;
 	xfer[1].buf = val;
 
-	if (i2c_transfer(client->adapter, xfer, 2) != 2) {
-		dev_err(&client->dev, "%s: i2c transfer failed\n", __func__);
-		return -EIO;
+	ret = i2c_transfer(client->adapter, xfer, 2);
+	if (ret == 2) {
+		ret = 0;
+	} else {
+		if (ret >= 0)
+			ret = -EIO;
+		dev_err(&client->dev, "%s: i2c transfer failed (%d)\n",
+			__func__, ret);
 	}
 
-	return 0;
+	return ret;
 }
 
 static int mxt_read_reg(struct i2c_client *client, u16 reg, u8 *val)
@@ -425,27 +424,39 @@ static int mxt_read_reg(struct i2c_client *client, u16 reg, u8 *val)
 	return __mxt_read_reg(client, reg, 1, val);
 }
 
-static int mxt_write_reg(struct i2c_client *client, u16 reg, u8 val)
+static int __mxt_write_reg(struct i2c_client *client, u16 reg, u16 len,
+			   const void *val)
 {
-	u8 buf[3];
+	u8 *buf;
+	size_t count;
+	int ret;
+
+	count = len + 2;
+	buf = kmalloc(count, GFP_KERNEL);
+	if (!buf)
+		return -ENOMEM;
 
 	buf[0] = reg & 0xff;
 	buf[1] = (reg >> 8) & 0xff;
-	buf[2] = val;
+	memcpy(&buf[2], val, len);
 
-	if (i2c_master_send(client, buf, 3) != 3) {
-		dev_err(&client->dev, "%s: i2c send failed\n", __func__);
-		return -EIO;
+	ret = i2c_master_send(client, buf, count);
+	if (ret == count) {
+		ret = 0;
+	} else {
+		if (ret >= 0)
+			ret = -EIO;
+		dev_err(&client->dev, "%s: i2c send failed (%d)\n",
+			__func__, ret);
 	}
 
-	return 0;
+	kfree(buf);
+	return ret;
 }
 
-static int mxt_read_object_table(struct i2c_client *client,
-				      u16 reg, u8 *object_buf)
+static int mxt_write_reg(struct i2c_client *client, u16 reg, u8 val)
 {
-	return __mxt_read_reg(client, reg, MXT_OBJECT_SIZE,
-				   object_buf);
+	return __mxt_write_reg(client, reg, 1, &val);
 }
 
 static struct mxt_object *
@@ -479,20 +490,6 @@ static int mxt_read_message(struct mxt_data *data,
 			sizeof(struct mxt_message), message);
 }
 
-static int mxt_read_object(struct mxt_data *data,
-				u8 type, u8 offset, u8 *val)
-{
-	struct mxt_object *object;
-	u16 reg;
-
-	object = mxt_get_object(data, type);
-	if (!object)
-		return -EINVAL;
-
-	reg = object->start_address;
-	return __mxt_read_reg(data->client, reg + offset, 1, val);
-}
-
 static int mxt_write_object(struct mxt_data *data,
 				 u8 type, u8 offset, u8 val)
 {
@@ -507,75 +504,17 @@ static int mxt_write_object(struct mxt_data *data,
 	return mxt_write_reg(data->client, reg + offset, val);
 }
 
-static void mxt_input_report(struct mxt_data *data, int single_id)
-{
-	struct mxt_finger *finger = data->finger;
-	struct input_dev *input_dev = data->input_dev;
-	int status = finger[single_id].status;
-	int finger_num = 0;
-	int id;
-
-	for (id = 0; id < MXT_MAX_FINGER; id++) {
-		if (!finger[id].status)
-			continue;
-
-		input_mt_slot(input_dev, id);
-		input_mt_report_slot_state(input_dev, MT_TOOL_FINGER,
-				finger[id].status != MXT_RELEASE);
-
-		if (finger[id].status != MXT_RELEASE) {
-			finger_num++;
-			input_report_abs(input_dev, ABS_MT_TOUCH_MAJOR,
-					finger[id].area);
-			input_report_abs(input_dev, ABS_MT_POSITION_X,
-					finger[id].x);
-			input_report_abs(input_dev, ABS_MT_POSITION_Y,
-					finger[id].y);
-			input_report_abs(input_dev, ABS_MT_PRESSURE,
-					finger[id].pressure);
-		} else {
-			finger[id].status = 0;
-		}
-	}
-
-	input_report_key(input_dev, BTN_TOUCH, finger_num > 0);
-
-	if (status != MXT_RELEASE) {
-		input_report_abs(input_dev, ABS_X, finger[single_id].x);
-		input_report_abs(input_dev, ABS_Y, finger[single_id].y);
-		input_report_abs(input_dev,
-				 ABS_PRESSURE, finger[single_id].pressure);
-	}
-
-	input_sync(input_dev);
-}
-
 static void mxt_input_touchevent(struct mxt_data *data,
 				      struct mxt_message *message, int id)
 {
-	struct mxt_finger *finger = data->finger;
 	struct device *dev = &data->client->dev;
 	u8 status = message->message[0];
+	struct input_dev *input_dev = data->input_dev;
 	int x;
 	int y;
 	int area;
 	int pressure;
 
-	/* Check the touch is present on the screen */
-	if (!(status & MXT_DETECT)) {
-		if (status & MXT_RELEASE) {
-			dev_dbg(dev, "[%d] released\n", id);
-
-			finger[id].status = MXT_RELEASE;
-			mxt_input_report(data, id);
-		}
-		return;
-	}
-
-	/* Check only AMP detection */
-	if (!(status & (MXT_PRESS | MXT_MOVE)))
-		return;
-
 	x = (message->message[1] << 4) | ((message->message[3] >> 4) & 0xf);
 	y = (message->message[2] << 4) | ((message->message[3] & 0xf));
 	if (data->max_x < 1024)
@@ -586,30 +525,50 @@ static void mxt_input_touchevent(struct mxt_data *data,
 	area = message->message[4];
 	pressure = message->message[5];
 
-	dev_dbg(dev, "[%d] %s x: %d, y: %d, area: %d\n", id,
-		status & MXT_MOVE ? "moved" : "pressed",
-		x, y, area);
+	dev_dbg(dev,
+		"[%u] %c%c%c%c%c%c%c%c x: %5u y: %5u area: %3u amp: %3u\n",
+		id,
+		(status & MXT_DETECT) ? 'D' : '.',
+		(status & MXT_PRESS) ? 'P' : '.',
+		(status & MXT_RELEASE) ? 'R' : '.',
+		(status & MXT_MOVE) ? 'M' : '.',
+		(status & MXT_VECTOR) ? 'V' : '.',
+		(status & MXT_AMP) ? 'A' : '.',
+		(status & MXT_SUPPRESS) ? 'S' : '.',
+		(status & MXT_UNGRIP) ? 'U' : '.',
+		x, y, area, pressure);
+
+	input_mt_slot(input_dev, id);
+	input_mt_report_slot_state(input_dev, MT_TOOL_FINGER,
+				   status & MXT_DETECT);
+
+	if (status & MXT_DETECT) {
+		input_report_abs(input_dev, ABS_MT_POSITION_X, x);
+		input_report_abs(input_dev, ABS_MT_POSITION_Y, y);
+		input_report_abs(input_dev, ABS_MT_PRESSURE, pressure);
+		input_report_abs(input_dev, ABS_MT_TOUCH_MAJOR, area);
+	}
+}
 
-	finger[id].status = status & MXT_MOVE ?
-				MXT_MOVE : MXT_PRESS;
-	finger[id].x = x;
-	finger[id].y = y;
-	finger[id].area = area;
-	finger[id].pressure = pressure;
+static unsigned mxt_extract_T6_csum(const u8 *csum)
+{
+	return csum[0] | (csum[1] << 8) | (csum[2] << 16);
+}
 
-	mxt_input_report(data, id);
+static bool mxt_is_T9_message(struct mxt_data *data, struct mxt_message *msg)
+{
+	u8 id = msg->reportid;
+	return (id >= data->T9_reportid_min && id <= data->T9_reportid_max);
 }
 
 static irqreturn_t mxt_interrupt(int irq, void *dev_id)
 {
 	struct mxt_data *data = dev_id;
 	struct mxt_message message;
-	struct mxt_object *object;
+	const u8 *payload = &message.message[0];
 	struct device *dev = &data->client->dev;
-	int id;
 	u8 reportid;
-	u8 max_reportid;
-	u8 min_reportid;
+	bool update_input = false;
 
 	do {
 		if (mxt_read_message(data, &message)) {
@@ -619,21 +578,25 @@ static irqreturn_t mxt_interrupt(int irq, void *dev_id)
 
 		reportid = message.reportid;
 
-		/* whether reportid is thing of MXT_TOUCH_MULTI_T9 */
-		object = mxt_get_object(data, MXT_TOUCH_MULTI_T9);
-		if (!object)
-			goto end;
-
-		max_reportid = object->max_reportid;
-		min_reportid = max_reportid - object->num_report_ids + 1;
-		id = reportid - min_reportid;
-
-		if (reportid >= min_reportid && reportid <= max_reportid)
+		if (reportid == data->T6_reportid) {
+			u8 status = payload[0];
+			unsigned csum = mxt_extract_T6_csum(&payload[1]);
+			dev_dbg(dev, "Status: %02x Config Checksum: %06x\n",
+				status, csum);
+		} else if (mxt_is_T9_message(data, &message)) {
+			int id = reportid - data->T9_reportid_min;
 			mxt_input_touchevent(data, &message, id);
-		else
+			update_input = true;
+		} else {
 			mxt_dump_message(dev, &message);
+		}
 	} while (reportid != 0xff);
 
+	if (update_input) {
+		input_mt_report_pointer_emulation(data->input_dev, false);
+		input_sync(data->input_dev);
+	}
+
 end:
 	return IRQ_HANDLED;
 }
@@ -644,7 +607,8 @@ static int mxt_check_reg_init(struct mxt_data *data)
 	struct mxt_object *object;
 	struct device *dev = &data->client->dev;
 	int index = 0;
-	int i, j, config_offset;
+	int i, size;
+	int ret;
 
 	if (!pdata->config) {
 		dev_dbg(dev, "No cfg data defined, skipping reg init\n");
@@ -657,18 +621,17 @@ static int mxt_check_reg_init(struct mxt_data *data)
 		if (!mxt_object_writable(object->type))
 			continue;
 
-		for (j = 0;
-		     j < (object->size + 1) * (object->instances + 1);
-		     j++) {
-			config_offset = index + j;
-			if (config_offset > pdata->config_length) {
-				dev_err(dev, "Not enough config data!\n");
-				return -EINVAL;
-			}
-			mxt_write_object(data, object->type, j,
-					 pdata->config[config_offset]);
+		size = (object->size + 1) * (object->instances + 1);
+		if (index + size > pdata->config_length) {
+			dev_err(dev, "Not enough config data!\n");
+			return -EINVAL;
 		}
-		index += (object->size + 1) * (object->instances + 1);
+
+		ret = __mxt_write_reg(data->client, object->start_address,
+				size, &pdata->config[index]);
+		if (ret)
+			return ret;
+		index += size;
 	}
 
 	return 0;
@@ -749,68 +712,76 @@ static int mxt_get_info(struct mxt_data *data)
 	struct i2c_client *client = data->client;
 	struct mxt_info *info = &data->info;
 	int error;
-	u8 val;
 
-	error = mxt_read_reg(client, MXT_FAMILY_ID, &val);
+	/* Read 7-byte info block starting at address 0 */
+	error = __mxt_read_reg(client, MXT_INFO, sizeof(*info), info);
 	if (error)
 		return error;
-	info->family_id = val;
-
-	error = mxt_read_reg(client, MXT_VARIANT_ID, &val);
-	if (error)
-		return error;
-	info->variant_id = val;
-
-	error = mxt_read_reg(client, MXT_VERSION, &val);
-	if (error)
-		return error;
-	info->version = val;
-
-	error = mxt_read_reg(client, MXT_BUILD, &val);
-	if (error)
-		return error;
-	info->build = val;
-
-	error = mxt_read_reg(client, MXT_OBJECT_NUM, &val);
-	if (error)
-		return error;
-	info->object_num = val;
 
 	return 0;
 }
 
 static int mxt_get_object_table(struct mxt_data *data)
 {
+	struct i2c_client *client = data->client;
+	size_t table_size;
 	int error;
 	int i;
-	u16 reg;
-	u8 reportid = 0;
-	u8 buf[MXT_OBJECT_SIZE];
+	u8 reportid;
+
+	table_size = data->info.object_num * sizeof(struct mxt_object);
+	error = __mxt_read_reg(client, MXT_OBJECT_START, table_size,
+			data->object_table);
+	if (error)
+		return error;
 
+	/* Valid Report IDs start counting from 1 */
+	reportid = 1;
 	for (i = 0; i < data->info.object_num; i++) {
 		struct mxt_object *object = data->object_table + i;
+		u8 min_id, max_id;
 
-		reg = MXT_OBJECT_START + MXT_OBJECT_SIZE * i;
-		error = mxt_read_object_table(data->client, reg, buf);
-		if (error)
-			return error;
-
-		object->type = buf[0];
-		object->start_address = (buf[2] << 8) | buf[1];
-		object->size = buf[3];
-		object->instances = buf[4];
-		object->num_report_ids = buf[5];
+		le16_to_cpus(&object->start_address);
 
 		if (object->num_report_ids) {
+			min_id = reportid;
 			reportid += object->num_report_ids *
 					(object->instances + 1);
-			object->max_reportid = reportid;
+			max_id = reportid - 1;
+		} else {
+			min_id = 0;
+			max_id = 0;
+		}
+
+		dev_dbg(&data->client->dev,
+			"Type %2d Start %3d Size %3d Instances %2d ReportIDs %3u : %3u\n",
+			object->type, object->start_address, object->size + 1,
+			object->instances + 1, min_id, max_id);
+
+		switch (object->type) {
+		case MXT_GEN_COMMAND_T6:
+			data->T6_reportid = min_id;
+			break;
+		case MXT_TOUCH_MULTI_T9:
+			data->T9_reportid_min = min_id;
+			data->T9_reportid_max = max_id;
+			break;
 		}
 	}
 
 	return 0;
 }
 
+static void mxt_free_object_table(struct mxt_data *data)
+{
+	kfree(data->object_table);
+	data->object_table = NULL;
+	data->T6_reportid = 0;
+	data->T9_reportid_min = 0;
+	data->T9_reportid_max = 0;
+
+}
+
 static int mxt_initialize(struct mxt_data *data)
 {
 	struct i2c_client *client = data->client;
@@ -833,12 +804,12 @@ static int mxt_initialize(struct mxt_data *data)
 	/* Get object table information */
 	error = mxt_get_object_table(data);
 	if (error)
-		return error;
+		goto err_free_object_table;
 
 	/* Check register init values */
 	error = mxt_check_reg_init(data);
 	if (error)
-		return error;
+		goto err_free_object_table;
 
 	mxt_handle_pdata(data);
 
@@ -856,25 +827,29 @@ static int mxt_initialize(struct mxt_data *data)
 	/* Update matrix size at info struct */
 	error = mxt_read_reg(client, MXT_MATRIX_X_SIZE, &val);
 	if (error)
-		return error;
+		goto err_free_object_table;
 	info->matrix_xsize = val;
 
 	error = mxt_read_reg(client, MXT_MATRIX_Y_SIZE, &val);
 	if (error)
-		return error;
+		goto err_free_object_table;
 	info->matrix_ysize = val;
 
 	dev_info(&client->dev,
-			"Family ID: %d Variant ID: %d Version: %d Build: %d\n",
-			info->family_id, info->variant_id, info->version,
-			info->build);
+			"Family ID: %u Variant ID: %u Major.Minor.Build: %u.%u.%02X\n",
+			info->family_id, info->variant_id, info->version >> 4,
+			info->version & 0xf, info->build);
 
 	dev_info(&client->dev,
-			"Matrix X Size: %d Matrix Y Size: %d Object Num: %d\n",
+			"Matrix X Size: %u Matrix Y Size: %u Object Num: %u\n",
 			info->matrix_xsize, info->matrix_ysize,
 			info->object_num);
 
 	return 0;
+
+err_free_object_table:
+	mxt_free_object_table(data);
+	return error;
 }
 
 static void mxt_calc_resolution(struct mxt_data *data)
@@ -891,6 +866,44 @@ static void mxt_calc_resolution(struct mxt_data *data)
 	}
 }
 
+/* Firmware Version is returned as Major.Minor.Build */
+static ssize_t mxt_fw_version_show(struct device *dev,
+				   struct device_attribute *attr, char *buf)
+{
+	struct mxt_data *data = dev_get_drvdata(dev);
+	struct mxt_info *info = &data->info;
+	return scnprintf(buf, PAGE_SIZE, "%u.%u.%02X\n",
+			 info->version >> 4, info->version & 0xf, info->build);
+}
+
+/* Hardware Version is returned as FamilyID.VariantID */
+static ssize_t mxt_hw_version_show(struct device *dev,
+				   struct device_attribute *attr, char *buf)
+{
+	struct mxt_data *data = dev_get_drvdata(dev);
+	struct mxt_info *info = &data->info;
+	return scnprintf(buf, PAGE_SIZE, "%u.%u\n",
+			 info->family_id, info->variant_id);
+}
+
+static ssize_t mxt_show_instance(char *buf, int count,
+				 struct mxt_object *object, int instance,
+				 const u8 *val)
+{
+	int i;
+
+	if (object->instances > 0)
+		count += scnprintf(buf + count, PAGE_SIZE - count,
+				   "Instance %u\n", instance);
+
+	for (i = 0; i < object->size + 1; i++)
+		count += scnprintf(buf + count, PAGE_SIZE - count,
+				"\t[%2u]: %02x (%d)\n", i, val[i], val[i]);
+	count += scnprintf(buf + count, PAGE_SIZE - count, "\n");
+
+	return count;
+}
+
 static ssize_t mxt_object_show(struct device *dev,
 				    struct device_attribute *attr, char *buf)
 {
@@ -899,43 +912,38 @@ static ssize_t mxt_object_show(struct device *dev,
 	int count = 0;
 	int i, j;
 	int error;
-	u8 val;
+	u8 *obuf;
 
+	/* Pre-allocate buffer large enough to hold max sized object. */
+	obuf = kmalloc(256, GFP_KERNEL);
+	if (!obuf)
+		return -ENOMEM;
+
+	error = 0;
 	for (i = 0; i < data->info.object_num; i++) {
 		object = data->object_table + i;
 
-		count += snprintf(buf + count, PAGE_SIZE - count,
-				"Object[%d] (Type %d)\n",
-				i + 1, object->type);
-		if (count >= PAGE_SIZE)
-			return PAGE_SIZE - 1;
-
-		if (!mxt_object_readable(object->type)) {
-			count += snprintf(buf + count, PAGE_SIZE - count,
-					"\n");
-			if (count >= PAGE_SIZE)
-				return PAGE_SIZE - 1;
+		if (!mxt_object_readable(object->type))
 			continue;
-		}
 
-		for (j = 0; j < object->size + 1; j++) {
-			error = mxt_read_object(data,
-						object->type, j, &val);
+		count += scnprintf(buf + count, PAGE_SIZE - count,
+				"T%u:\n", object->type);
+
+		for (j = 0; j < object->instances + 1; j++) {
+			u16 size = object->size + 1;
+			u16 addr = object->start_address + j * size;
+
+			error = __mxt_read_reg(data->client, addr, size, obuf);
 			if (error)
-				return error;
+				goto done;
 
-			count += snprintf(buf + count, PAGE_SIZE - count,
-					"\t[%2d]: %02x (%d)\n", j, val, val);
-			if (count >= PAGE_SIZE)
-				return PAGE_SIZE - 1;
+			count = mxt_show_instance(buf, count, object, j, obuf);
 		}
-
-		count += snprintf(buf + count, PAGE_SIZE - count, "\n");
-		if (count >= PAGE_SIZE)
-			return PAGE_SIZE - 1;
 	}
 
-	return count;
+done:
+	kfree(obuf);
+	return error ?: count;
 }
 
 static int mxt_load_fw(struct device *dev, const char *fn)
@@ -1028,8 +1036,7 @@ static ssize_t mxt_update_fw_store(struct device *dev,
 		/* Wait for reset */
 		msleep(MXT_FWRESET_TIME);
 
-		kfree(data->object_table);
-		data->object_table = NULL;
+		mxt_free_object_table(data);
 
 		mxt_initialize(data);
 	}
@@ -1043,10 +1050,14 @@ static ssize_t mxt_update_fw_store(struct device *dev,
 	return count;
 }
 
+static DEVICE_ATTR(fw_version, S_IRUGO, mxt_fw_version_show, NULL);
+static DEVICE_ATTR(hw_version, S_IRUGO, mxt_hw_version_show, NULL);
 static DEVICE_ATTR(object, S_IRUGO, mxt_object_show, NULL);
 static DEVICE_ATTR(update_fw, S_IWUSR, NULL, mxt_update_fw_store);
 
 static struct attribute *mxt_attrs[] = {
+	&dev_attr_fw_version.attr,
+	&dev_attr_hw_version.attr,
 	&dev_attr_object.attr,
 	&dev_attr_update_fw.attr,
 	NULL
@@ -1093,6 +1104,7 @@ static int __devinit mxt_probe(struct i2c_client *client,
 	struct mxt_data *data;
 	struct input_dev *input_dev;
 	int error;
+	unsigned int num_mt_slots;
 
 	if (!pdata)
 		return -EINVAL;
@@ -1106,6 +1118,10 @@ static int __devinit mxt_probe(struct i2c_client *client,
 	}
 
 	input_dev->name = "Atmel maXTouch Touchscreen";
+	snprintf(data->phys, sizeof(data->phys), "i2c-%u-%04x/input0",
+		 client->adapter->nr, client->addr);
+	input_dev->phys = data->phys;
+
 	input_dev->id.bustype = BUS_I2C;
 	input_dev->dev.parent = &client->dev;
 	input_dev->open = mxt_input_open;
@@ -1118,6 +1134,10 @@ static int __devinit mxt_probe(struct i2c_client *client,
 
 	mxt_calc_resolution(data);
 
+	error = mxt_initialize(data);
+	if (error)
+		goto err_free_mem;
+
 	__set_bit(EV_ABS, input_dev->evbit);
 	__set_bit(EV_KEY, input_dev->evbit);
 	__set_bit(BTN_TOUCH, input_dev->keybit);
@@ -1131,7 +1151,10 @@ static int __devinit mxt_probe(struct i2c_client *client,
 			     0, 255, 0, 0);
 
 	/* For multi touch */
-	input_mt_init_slots(input_dev, MXT_MAX_FINGER);
+	num_mt_slots = data->T9_reportid_max - data->T9_reportid_min + 1;
+	error = input_mt_init_slots(input_dev, num_mt_slots);
+	if (error)
+		goto err_free_object;
 	input_set_abs_params(input_dev, ABS_MT_TOUCH_MAJOR,
 			     0, MXT_MAX_AREA, 0, 0);
 	input_set_abs_params(input_dev, ABS_MT_POSITION_X,
@@ -1144,13 +1167,9 @@ static int __devinit mxt_probe(struct i2c_client *client,
 	input_set_drvdata(input_dev, data);
 	i2c_set_clientdata(client, data);
 
-	error = mxt_initialize(data);
-	if (error)
-		goto err_free_object;
-
 	error = request_threaded_irq(client->irq, NULL, mxt_interrupt,
 				     pdata->irqflags | IRQF_ONESHOT,
-				     client->dev.driver->name, data);
+				     client->name, data);
 	if (error) {
 		dev_err(&client->dev, "Failed to register interrupt\n");
 		goto err_free_object;
diff --git a/include/linux/input.h b/include/linux/input.h
index 2740d080ec6..725dcd0f63a 100644
--- a/include/linux/input.h
+++ b/include/linux/input.h
@@ -807,18 +807,20 @@ struct input_keymap_entry {
 #define ABS_MT_WIDTH_MAJOR	0x32	/* Major axis of approaching ellipse */
 #define ABS_MT_WIDTH_MINOR	0x33	/* Minor axis (omit if circular) */
 #define ABS_MT_ORIENTATION	0x34	/* Ellipse orientation */
-#define ABS_MT_POSITION_X	0x35	/* Center X ellipse position */
-#define ABS_MT_POSITION_Y	0x36	/* Center Y ellipse position */
+#define ABS_MT_POSITION_X	0x35	/* Center X touch position */
+#define ABS_MT_POSITION_Y	0x36	/* Center Y touch position */
 #define ABS_MT_TOOL_TYPE	0x37	/* Type of touching device */
 #define ABS_MT_BLOB_ID		0x38	/* Group a set of packets as a blob */
 #define ABS_MT_TRACKING_ID	0x39	/* Unique ID of initiated contact */
 #define ABS_MT_PRESSURE		0x3a	/* Pressure on contact area */
 #define ABS_MT_DISTANCE		0x3b	/* Contact hover distance */
+#define ABS_MT_TOOL_X		0x3c	/* Center X tool position */
+#define ABS_MT_TOOL_Y		0x3d	/* Center Y tool position */
 
 #ifdef __KERNEL__
 /* Implementation details, userspace should not care about these */
 #define ABS_MT_FIRST		ABS_MT_TOUCH_MAJOR
-#define ABS_MT_LAST		ABS_MT_DISTANCE
+#define ABS_MT_LAST		ABS_MT_TOOL_Y
 #endif
 
 #define ABS_MAX			0x3f