summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorPaul Mackerras <paulus@samba.org>2005-10-27 20:20:42 +1000
committerPaul Mackerras <paulus@samba.org>2005-10-27 20:20:42 +1000
commitfda262b8978d0089758ef9444508434c74113a61 (patch)
tree86cca84a4f62d4d931d7c6e56cbb5b207281ba74
parent89edce0b4e71f6f78e27d7c18c63e957469b74d3 (diff)
[PATCH] ppc64: remove arch/ppc64/kernel/setup.c
and use setup_64.c from the merged tree instead. The only difference between them was the code to set up the syscall maps. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
-rw-r--r--arch/powerpc/kernel/Makefile5
-rw-r--r--arch/powerpc/kernel/setup_64.c18
-rw-r--r--arch/ppc64/kernel/Makefile2
-rw-r--r--arch/ppc64/kernel/setup.c1307
4 files changed, 17 insertions, 1315 deletions
diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile
index 30101762f7c..a733347964a 100644
--- a/arch/powerpc/kernel/Makefile
+++ b/arch/powerpc/kernel/Makefile
@@ -12,7 +12,8 @@ endif
obj-y := semaphore.o cputable.o ptrace.o syscalls.o \
signal_32.o pmc.o
-obj-$(CONFIG_PPC64) += binfmt_elf32.o sys_ppc32.o ptrace32.o
+obj-$(CONFIG_PPC64) += setup_64.o binfmt_elf32.o sys_ppc32.o \
+ ptrace32.o
obj-$(CONFIG_ALTIVEC) += vecemu.o vector.o
obj-$(CONFIG_POWER4) += idle_power4.o
obj-$(CONFIG_PPC_OF) += of_device.o
@@ -34,7 +35,7 @@ extra-y += vmlinux.lds
obj-y += process.o init_task.o time.o \
prom.o systbl.o traps.o setup-common.o
obj-$(CONFIG_PPC32) += entry_32.o idle_6xx.o setup_32.o misc_32.o
-obj-$(CONFIG_PPC64) += setup_64.o misc_64.o
+obj-$(CONFIG_PPC64) += misc_64.o
obj-$(CONFIG_PPC_OF) += prom_init.o
obj-$(CONFIG_MODULES) += ppc_ksyms.o
obj-$(CONFIG_BOOTX_TEXT) += btext.o
diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c
index 9cdf294e76f..721adeea601 100644
--- a/arch/powerpc/kernel/setup_64.c
+++ b/arch/powerpc/kernel/setup_64.c
@@ -702,6 +702,17 @@ static void __init emergency_stack_init(void)
limit)) + PAGE_SIZE;
}
+extern unsigned long *sys_call_table;
+extern unsigned long sys_ni_syscall;
+#ifdef CONFIG_PPC_MERGE
+#define SYS_CALL_ENTRY64(i) sys_call_table[(i) * 2]
+#define SYS_CALL_ENTRY32(i) sys_call_table[(i) * 2 + 1]
+#else
+extern unsigned long *sys_call_table32;
+#define SYS_CALL_ENTRY64(i) sys_call_table[(i)]
+#define SYS_CALL_ENTRY32(i) sys_call_table32[(i)]
+#endif
+
/*
* Called from setup_arch to initialize the bitmap of available
* syscalls in the systemcfg page
@@ -709,17 +720,14 @@ static void __init emergency_stack_init(void)
void __init setup_syscall_map(void)
{
unsigned int i, count64 = 0, count32 = 0;
- extern unsigned long *sys_call_table;
- extern unsigned long sys_ni_syscall;
-
for (i = 0; i < __NR_syscalls; i++) {
- if (sys_call_table[i*2] != sys_ni_syscall) {
+ if (SYS_CALL_ENTRY64(i) != sys_ni_syscall) {
count64++;
systemcfg->syscall_map_64[i >> 5] |=
0x80000000UL >> (i & 0x1f);
}
- if (sys_call_table[i*2+1] != sys_ni_syscall) {
+ if (SYS_CALL_ENTRY32(i) != sys_ni_syscall) {
count32++;
systemcfg->syscall_map_32[i >> 5] |=
0x80000000UL >> (i & 0x1f);
diff --git a/arch/ppc64/kernel/Makefile b/arch/ppc64/kernel/Makefile
index 83ecefdcfef..f2f60c9cc55 100644
--- a/arch/ppc64/kernel/Makefile
+++ b/arch/ppc64/kernel/Makefile
@@ -7,7 +7,7 @@ ifneq ($(CONFIG_PPC_MERGE),y)
EXTRA_CFLAGS += -mno-minimal-toc
extra-y := head.o vmlinux.lds
-obj-y := setup.o entry.o misc.o prom.o
+obj-y := entry.o misc.o prom.o
endif
diff --git a/arch/ppc64/kernel/setup.c b/arch/ppc64/kernel/setup.c
deleted file mode 100644
index 44ee6ebe9a6..00000000000
--- a/arch/ppc64/kernel/setup.c
+++ /dev/null
@@ -1,1307 +0,0 @@
-/*
- *
- * Common boot and setup code.
- *
- * Copyright (C) 2001 PPC64 Team, IBM Corp
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#undef DEBUG
-
-#include <linux/config.h>
-#include <linux/module.h>
-#include <linux/string.h>
-#include <linux/sched.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/reboot.h>
-#include <linux/delay.h>
-#include <linux/initrd.h>
-#include <linux/ide.h>
-#include <linux/seq_file.h>
-#include <linux/ioport.h>
-#include <linux/console.h>
-#include <linux/utsname.h>
-#include <linux/tty.h>
-#include <linux/root_dev.h>
-#include <linux/notifier.h>
-#include <linux/cpu.h>
-#include <linux/unistd.h>
-#include <linux/serial.h>
-#include <linux/serial_8250.h>
-#include <asm/io.h>
-#include <asm/prom.h>
-#include <asm/processor.h>
-#include <asm/pgtable.h>
-#include <asm/bootinfo.h>
-#include <asm/smp.h>
-#include <asm/elf.h>
-#include <asm/machdep.h>
-#include <asm/paca.h>
-#include <asm/ppcdebug.h>
-#include <asm/time.h>
-#include <asm/cputable.h>
-#include <asm/sections.h>
-#include <asm/btext.h>
-#include <asm/nvram.h>
-#include <asm/setup.h>
-#include <asm/system.h>
-#include <asm/rtas.h>
-#include <asm/iommu.h>
-#include <asm/serial.h>
-#include <asm/cache.h>
-#include <asm/page.h>
-#include <asm/mmu.h>
-#include <asm/lmb.h>
-#include <asm/iSeries/ItLpNaca.h>
-#include <asm/firmware.h>
-
-#ifdef DEBUG
-#define DBG(fmt...) udbg_printf(fmt)
-#else
-#define DBG(fmt...)
-#endif
-
-/*
- * Here are some early debugging facilities. You can enable one
- * but your kernel will not boot on anything else if you do so
- */
-
-/* This one is for use on LPAR machines that support an HVC console
- * on vterm 0
- */
-extern void udbg_init_debug_lpar(void);
-/* This one is for use on Apple G5 machines
- */
-extern void udbg_init_pmac_realmode(void);
-/* That's RTAS panel debug */
-extern void call_rtas_display_status_delay(unsigned char c);
-/* Here's maple real mode debug */
-extern void udbg_init_maple_realmode(void);
-
-#define EARLY_DEBUG_INIT() do {} while(0)
-
-#if 0
-#define EARLY_DEBUG_INIT() udbg_init_debug_lpar()
-#define EARLY_DEBUG_INIT() udbg_init_maple_realmode()
-#define EARLY_DEBUG_INIT() udbg_init_pmac_realmode()
-#define EARLY_DEBUG_INIT() \
- do { udbg_putc = call_rtas_display_status_delay; } while(0)
-#endif
-
-/* extern void *stab; */
-extern unsigned long klimit;
-
-extern void mm_init_ppc64(void);
-extern void stab_initialize(unsigned long stab);
-extern void htab_initialize(void);
-extern void early_init_devtree(void *flat_dt);
-extern void unflatten_device_tree(void);
-
-extern void smp_release_cpus(void);
-
-int have_of = 1;
-int boot_cpuid = 0;
-int boot_cpuid_phys = 0;
-dev_t boot_dev;
-u64 ppc64_pft_size;
-
-struct ppc64_caches ppc64_caches;
-EXPORT_SYMBOL_GPL(ppc64_caches);
-
-/*
- * These are used in binfmt_elf.c to put aux entries on the stack
- * for each elf executable being started.
- */
-int dcache_bsize;
-int icache_bsize;
-int ucache_bsize;
-
-/* The main machine-dep calls structure
- */
-struct machdep_calls ppc_md;
-EXPORT_SYMBOL(ppc_md);
-
-#ifdef CONFIG_MAGIC_SYSRQ
-unsigned long SYSRQ_KEY;
-#endif /* CONFIG_MAGIC_SYSRQ */
-
-
-static int ppc64_panic_event(struct notifier_block *, unsigned long, void *);
-static struct notifier_block ppc64_panic_block = {
- .notifier_call = ppc64_panic_event,
- .priority = INT_MIN /* may not return; must be done last */
-};
-
-/*
- * Perhaps we can put the pmac screen_info[] here
- * on pmac as well so we don't need the ifdef's.
- * Until we get multiple-console support in here
- * that is. -- Cort
- * Maybe tie it to serial consoles, since this is really what
- * these processors use on existing boards. -- Dan
- */
-struct screen_info screen_info = {
- .orig_x = 0,
- .orig_y = 25,
- .orig_video_cols = 80,
- .orig_video_lines = 25,
- .orig_video_isVGA = 1,
- .orig_video_points = 16
-};
-
-#ifdef CONFIG_SMP
-
-static int smt_enabled_cmdline;
-
-/* Look for ibm,smt-enabled OF option */
-static void check_smt_enabled(void)
-{
- struct device_node *dn;
- char *smt_option;
-
- /* Allow the command line to overrule the OF option */
- if (smt_enabled_cmdline)
- return;
-
- dn = of_find_node_by_path("/options");
-
- if (dn) {
- smt_option = (char *)get_property(dn, "ibm,smt-enabled", NULL);
-
- if (smt_option) {
- if (!strcmp(smt_option, "on"))
- smt_enabled_at_boot = 1;
- else if (!strcmp(smt_option, "off"))
- smt_enabled_at_boot = 0;
- }
- }
-}
-
-/* Look for smt-enabled= cmdline option */
-static int __init early_smt_enabled(char *p)
-{
- smt_enabled_cmdline = 1;
-
- if (!p)
- return 0;
-
- if (!strcmp(p, "on") || !strcmp(p, "1"))
- smt_enabled_at_boot = 1;
- else if (!strcmp(p, "off") || !strcmp(p, "0"))
- smt_enabled_at_boot = 0;
-
- return 0;
-}
-early_param("smt-enabled", early_smt_enabled);
-
-/**
- * setup_cpu_maps - initialize the following cpu maps:
- * cpu_possible_map
- * cpu_present_map
- * cpu_sibling_map
- *
- * Having the possible map set up early allows us to restrict allocations
- * of things like irqstacks to num_possible_cpus() rather than NR_CPUS.
- *
- * We do not initialize the online map here; cpus set their own bits in
- * cpu_online_map as they come up.
- *
- * This function is valid only for Open Firmware systems. finish_device_tree
- * must be called before using this.
- *
- * While we're here, we may as well set the "physical" cpu ids in the paca.
- */
-static void __init setup_cpu_maps(void)
-{
- struct device_node *dn = NULL;
- int cpu = 0;
- int swap_cpuid = 0;
-
- check_smt_enabled();
-
- while ((dn = of_find_node_by_type(dn, "cpu")) && cpu < NR_CPUS) {
- u32 *intserv;
- int j, len = sizeof(u32), nthreads;
-
- intserv = (u32 *)get_property(dn, "ibm,ppc-interrupt-server#s",
- &len);
- if (!intserv)
- intserv = (u32 *)get_property(dn, "reg", NULL);
-
- nthreads = len / sizeof(u32);
-
- for (j = 0; j < nthreads && cpu < NR_CPUS; j++) {
- cpu_set(cpu, cpu_present_map);
- set_hard_smp_processor_id(cpu, intserv[j]);
-
- if (intserv[j] == boot_cpuid_phys)
- swap_cpuid = cpu;
- cpu_set(cpu, cpu_possible_map);
- cpu++;
- }
- }
-
- /* Swap CPU id 0 with boot_cpuid_phys, so we can always assume that
- * boot cpu is logical 0.
- */
- if (boot_cpuid_phys != get_hard_smp_processor_id(0)) {
- u32 tmp;
- tmp = get_hard_smp_processor_id(0);
- set_hard_smp_processor_id(0, boot_cpuid_phys);
- set_hard_smp_processor_id(swap_cpuid, tmp);
- }
-
- /*
- * On pSeries LPAR, we need to know how many cpus
- * could possibly be added to this partition.
- */
- if (systemcfg->platform == PLATFORM_PSERIES_LPAR &&
- (dn = of_find_node_by_path("/rtas"))) {
- int num_addr_cell, num_size_cell, maxcpus;
- unsigned int *ireg;
-
- num_addr_cell = prom_n_addr_cells(dn);
- num_size_cell = prom_n_size_cells(dn);
-
- ireg = (unsigned int *)
- get_property(dn, "ibm,lrdr-capacity", NULL);
-
- if (!ireg)
- goto out;
-
- maxcpus = ireg[num_addr_cell + num_size_cell];
-
- /* Double maxcpus for processors which have SMT capability */
- if (cpu_has_feature(CPU_FTR_SMT))
- maxcpus *= 2;
-
- if (maxcpus > NR_CPUS) {
- printk(KERN_WARNING
- "Partition configured for %d cpus, "
- "operating system maximum is %d.\n",
- maxcpus, NR_CPUS);
- maxcpus = NR_CPUS;
- } else
- printk(KERN_INFO "Partition configured for %d cpus.\n",
- maxcpus);
-
- for (cpu = 0; cpu < maxcpus; cpu++)
- cpu_set(cpu, cpu_possible_map);
- out:
- of_node_put(dn);
- }
-
- /*
- * Do the sibling map; assume only two threads per processor.
- */
- for_each_cpu(cpu) {
- cpu_set(cpu, cpu_sibling_map[cpu]);
- if (cpu_has_feature(CPU_FTR_SMT))
- cpu_set(cpu ^ 0x1, cpu_sibling_map[cpu]);
- }
-
- systemcfg->processorCount = num_present_cpus();
-}
-#endif /* CONFIG_SMP */
-
-extern struct machdep_calls pSeries_md;
-extern struct machdep_calls pmac_md;
-extern struct machdep_calls maple_md;
-extern struct machdep_calls bpa_md;
-extern struct machdep_calls iseries_md;
-
-/* Ultimately, stuff them in an elf section like initcalls... */
-static struct machdep_calls __initdata *machines[] = {
-#ifdef CONFIG_PPC_PSERIES
- &pSeries_md,
-#endif /* CONFIG_PPC_PSERIES */
-#ifdef CONFIG_PPC_PMAC
- &pmac_md,
-#endif /* CONFIG_PPC_PMAC */
-#ifdef CONFIG_PPC_MAPLE
- &maple_md,
-#endif /* CONFIG_PPC_MAPLE */
-#ifdef CONFIG_PPC_BPA
- &bpa_md,
-#endif
-#ifdef CONFIG_PPC_ISERIES
- &iseries_md,
-#endif
- NULL
-};
-
-/*
- * Early initialization entry point. This is called by head.S
- * with MMU translation disabled. We rely on the "feature" of
- * the CPU that ignores the top 2 bits of the address in real
- * mode so we can access kernel globals normally provided we
- * only toy with things in the RMO region. From here, we do
- * some early parsing of the device-tree to setup out LMB
- * data structures, and allocate & initialize the hash table
- * and segment tables so we can start running with translation
- * enabled.
- *
- * It is this function which will call the probe() callback of
- * the various platform types and copy the matching one to the
- * global ppc_md structure. Your platform can eventually do
- * some very early initializations from the probe() routine, but
- * this is not recommended, be very careful as, for example, the
- * device-tree is not accessible via normal means at this point.
- */
-
-void __init early_setup(unsigned long dt_ptr)
-{
- struct paca_struct *lpaca = get_paca();
- static struct machdep_calls **mach;
-
- /*
- * Enable early debugging if any specified (see top of
- * this file)
- */
- EARLY_DEBUG_INIT();
-
- DBG(" -> early_setup()\n");
-
- /*
- * Fill the default DBG level (do we want to keep
- * that old mecanism around forever ?)
- */
- ppcdbg_initialize();
-
- /*
- * Do early initializations using the flattened device
- * tree, like retreiving the physical memory map or
- * calculating/retreiving the hash table size
- */
- early_init_devtree(__va(dt_ptr));
-
- /*
- * Iterate all ppc_md structures until we find the proper
- * one for the current machine type
- */
- DBG("Probing machine type for platform %x...\n",
- systemcfg->platform);
-
- for (mach = machines; *mach; mach++) {
- if ((*mach)->probe(systemcfg->platform))
- break;
- }
- /* What can we do if we didn't find ? */
- if (*mach == NULL) {
- DBG("No suitable machine found !\n");
- for (;;);
- }
- ppc_md = **mach;
-
- DBG("Found, Initializing memory management...\n");
-
- /*
- * Initialize stab / SLB management
- */
- if (!firmware_has_feature(FW_FEATURE_ISERIES))
- stab_initialize(lpaca->stab_real);
-
- /*
- * Initialize the MMU Hash table and create the linear mapping
- * of memory
- */
- htab_initialize();
-
- DBG(" <- early_setup()\n");
-}
-
-
-/*
- * Initialize some remaining members of the ppc64_caches and systemcfg structures
- * (at least until we get rid of them completely). This is mostly some
- * cache informations about the CPU that will be used by cache flush
- * routines and/or provided to userland
- */
-static void __init initialize_cache_info(void)
-{
- struct device_node *np;
- unsigned long num_cpus = 0;
-
- DBG(" -> initialize_cache_info()\n");
-
- for (np = NULL; (np = of_find_node_by_type(np, "cpu"));) {
- num_cpus += 1;
-
- /* We're assuming *all* of the CPUs have the same
- * d-cache and i-cache sizes... -Peter
- */
-
- if ( num_cpus == 1 ) {
- u32 *sizep, *lsizep;
- u32 size, lsize;
- const char *dc, *ic;
-
- /* Then read cache informations */
- if (systemcfg->platform == PLATFORM_POWERMAC) {
- dc = "d-cache-block-size";
- ic = "i-cache-block-size";
- } else {
- dc = "d-cache-line-size";
- ic = "i-cache-line-size";
- }
-
- size = 0;
- lsize = cur_cpu_spec->dcache_bsize;
- sizep = (u32 *)get_property(np, "d-cache-size", NULL);
- if (sizep != NULL)
- size = *sizep;
- lsizep = (u32 *) get_property(np, dc, NULL);
- if (lsizep != NULL)
- lsize = *lsizep;
- if (sizep == 0 || lsizep == 0)
- DBG("Argh, can't find dcache properties ! "
- "sizep: %p, lsizep: %p\n", sizep, lsizep);
-
- systemcfg->dcache_size = ppc64_caches.dsize = size;
- systemcfg->dcache_line_size =
- ppc64_caches.dline_size = lsize;
- ppc64_caches.log_dline_size = __ilog2(lsize);
- ppc64_caches.dlines_per_page = PAGE_SIZE / lsize;
-
- size = 0;
- lsize = cur_cpu_spec->icache_bsize;
- sizep = (u32 *)get_property(np, "i-cache-size", NULL);
- if (sizep != NULL)
- size = *sizep;
- lsizep = (u32 *)get_property(np, ic, NULL);
- if (lsizep != NULL)
- lsize = *lsizep;
- if (sizep == 0 || lsizep == 0)
- DBG("Argh, can't find icache properties ! "
- "sizep: %p, lsizep: %p\n", sizep, lsizep);
-
- systemcfg->icache_size = ppc64_caches.isize = size;
- systemcfg->icache_line_size =
- ppc64_caches.iline_size = lsize;
- ppc64_caches.log_iline_size = __ilog2(lsize);
- ppc64_caches.ilines_per_page = PAGE_SIZE / lsize;
- }
- }
-
- /* Add an eye catcher and the systemcfg layout version number */
- strcpy(systemcfg->eye_catcher, "SYSTEMCFG:PPC64");
- systemcfg->version.major = SYSTEMCFG_MAJOR;
- systemcfg->version.minor = SYSTEMCFG_MINOR;
- systemcfg->processor = mfspr(SPRN_PVR);
-
- DBG(" <- initialize_cache_info()\n");
-}
-
-static void __init check_for_initrd(void)
-{
-#ifdef CONFIG_BLK_DEV_INITRD
- u64 *prop;
-
- DBG(" -> check_for_initrd()\n");
-
- if (of_chosen) {
- prop = (u64 *)get_property(of_chosen,
- "linux,initrd-start", NULL);
- if (prop != NULL) {
- initrd_start = (unsigned long)__va(*prop);
- prop = (u64 *)get_property(of_chosen,
- "linux,initrd-end", NULL);
- if (prop != NULL) {
- initrd_end = (unsigned long)__va(*prop);
- initrd_below_start_ok = 1;
- } else
- initrd_start = 0;
- }
- }
-
- /* If we were passed an initrd, set the ROOT_DEV properly if the values
- * look sensible. If not, clear initrd reference.
- */
- if (initrd_start >= KERNELBASE && initrd_end >= KERNELBASE &&
- initrd_end > initrd_start)
- ROOT_DEV = Root_RAM0;
- else
- initrd_start = initrd_end = 0;
-
- if (initrd_start)
- printk("Found initrd at 0x%lx:0x%lx\n", initrd_start, initrd_end);
-
- DBG(" <- check_for_initrd()\n");
-#endif /* CONFIG_BLK_DEV_INITRD */
-}
-
-/*
- * Do some initial setup of the system. The parameters are those which
- * were passed in from the bootloader.
- */
-void __init setup_system(void)
-{
- DBG(" -> setup_system()\n");
-
- /*
- * Unflatten the device-tree passed by prom_init or kexec
- */
- unflatten_device_tree();
-
- /*
- * Fill the ppc64_caches & systemcfg structures with informations
- * retreived from the device-tree. Need to be called before
- * finish_device_tree() since the later requires some of the
- * informations filled up here to properly parse the interrupt
- * tree.
- * It also sets up the cache line sizes which allows to call
- * routines like flush_icache_range (used by the hash init
- * later on).
- */
- initialize_cache_info();
-
-#ifdef CONFIG_PPC_RTAS
- /*
- * Initialize RTAS if available
- */
- rtas_initialize();
-#endif /* CONFIG_PPC_RTAS */
-
- /*
- * Check if we have an initrd provided via the device-tree
- */
- check_for_initrd();
-
- /*
- * Do some platform specific early initializations, that includes
- * setting up the hash table pointers. It also sets up some interrupt-mapping
- * related options that will be used by finish_device_tree()
- */
- ppc_md.init_early();
-
- /*
- * "Finish" the device-tree, that is do the actual parsing of
- * some of the properties like the interrupt map
- */
- finish_device_tree();
-
-#ifdef CONFIG_BOOTX_TEXT
- init_boot_display();
-#endif
-
- /*
- * Initialize xmon
- */
-#ifdef CONFIG_XMON_DEFAULT
- xmon_init(1);
-#endif
- /*
- * Register early console
- */
- register_early_udbg_console();
-
- /* Save unparsed command line copy for /proc/cmdline */
- strlcpy(saved_command_line, cmd_line, COMMAND_LINE_SIZE);
-
- parse_early_param();
-
-#ifdef CONFIG_SMP
- /*
- * iSeries has already initialized the cpu maps at this point.
- */
- setup_cpu_maps();
-
- /* Release secondary cpus out of their spinloops at 0x60 now that
- * we can map physical -> logical CPU ids
- */
- smp_release_cpus();
-#endif
-
- printk("Starting Linux PPC64 %s\n", system_utsname.version);
-
- printk("-----------------------------------------------------\n");
- printk("ppc64_pft_size = 0x%lx\n", ppc64_pft_size);
- printk("ppc64_debug_switch = 0x%lx\n", ppc64_debug_switch);
- printk("ppc64_interrupt_controller = 0x%ld\n", ppc64_interrupt_controller);
- printk("systemcfg = 0x%p\n", systemcfg);
- printk("systemcfg->platform = 0x%x\n", systemcfg->platform);
- printk("systemcfg->processorCount = 0x%lx\n", systemcfg->processorCount);
- printk("systemcfg->physicalMemorySize = 0x%lx\n", systemcfg->physicalMemorySize);
- printk("ppc64_caches.dcache_line_size = 0x%x\n",
- ppc64_caches.dline_size);
- printk("ppc64_caches.icache_line_size = 0x%x\n",
- ppc64_caches.iline_size);
- printk("htab_address = 0x%p\n", htab_address);
- printk("htab_hash_mask = 0x%lx\n", htab_hash_mask);
- printk("-----------------------------------------------------\n");
-
- mm_init_ppc64();
-
- DBG(" <- setup_system()\n");
-}
-
-/* also used by kexec */
-void machine_shutdown(void)
-{
- if (ppc_md.nvram_sync)
- ppc_md.nvram_sync();
-}
-
-void machine_restart(char *cmd)
-{
- machine_shutdown();
- ppc_md.restart(cmd);
-#ifdef CONFIG_SMP
- smp_send_stop();
-#endif
- printk(KERN_EMERG "System Halted, OK to turn off power\n");
- local_irq_disable();
- while (1) ;
-}
-
-void machine_power_off(void)
-{
- machine_shutdown();
- ppc_md.power_off();
-#ifdef CONFIG_SMP
- smp_send_stop();
-#endif
- printk(KERN_EMERG "System Halted, OK to turn off power\n");
- local_irq_disable();
- while (1) ;
-}
-/* Used by the G5 thermal driver */
-EXPORT_SYMBOL_GPL(machine_power_off);
-
-void machine_halt(void)
-{
- machine_shutdown();
- ppc_md.halt();
-#ifdef CONFIG_SMP
- smp_send_stop();
-#endif
- printk(KERN_EMERG "System Halted, OK to turn off power\n");
- local_irq_disable();
- while (1) ;
-}
-
-static int ppc64_panic_event(struct notifier_block *this,
- unsigned long event, void *ptr)
-{
- ppc_md.panic((char *)ptr); /* May not return */
- return NOTIFY_DONE;
-}
-
-
-#ifdef CONFIG_SMP
-DEFINE_PER_CPU(unsigned int, pvr);
-#endif
-
-static int show_cpuinfo(struct seq_file *m, void *v)
-{
- unsigned long cpu_id = (unsigned long)v - 1;
- unsigned int pvr;
- unsigned short maj;
- unsigned short min;
-
- if (cpu_id == NR_CPUS) {
- seq_printf(m, "timebase\t: %lu\n", ppc_tb_freq);
-
- if (ppc_md.show_cpuinfo != NULL)
- ppc_md.show_cpuinfo(m);
-
- return 0;
- }
-
- /* We only show online cpus: disable preempt (overzealous, I
- * knew) to prevent cpu going down. */
- preempt_disable();
- if (!cpu_online(cpu_id)) {
- preempt_enable();
- return 0;
- }
-
-#ifdef CONFIG_SMP
- pvr = per_cpu(pvr, cpu_id);
-#else
- pvr = mfspr(SPRN_PVR);
-#endif
- maj = (pvr >> 8) & 0xFF;
- min = pvr & 0xFF;
-
- seq_printf(m, "processor\t: %lu\n", cpu_id);
- seq_printf(m, "cpu\t\t: ");
-
- if (cur_cpu_spec->pvr_mask)
- seq_printf(m, "%s", cur_cpu_spec->cpu_name);
- else
- seq_printf(m, "unknown (%08x)", pvr);
-
-#ifdef CONFIG_ALTIVEC
- if (cpu_has_feature(CPU_FTR_ALTIVEC))
- seq_printf(m, ", altivec supported");
-#endif /* CONFIG_ALTIVEC */
-
- seq_printf(m, "\n");
-
- /*
- * Assume here that all clock rates are the same in a
- * smp system. -- Cort
- */
- seq_printf(m, "clock\t\t: %lu.%06luMHz\n", ppc_proc_freq / 1000000,
- ppc_proc_freq % 1000000);
-
- seq_printf(m, "revision\t: %hd.%hd\n\n", maj, min);
-
- preempt_enable();
- return 0;
-}
-
-static void *c_start(struct seq_file *m, loff_t *pos)
-{
- return *pos <= NR_CPUS ? (void *)((*pos)+1) : NULL;
-}
-static void *c_next(struct seq_file *m, void *v, loff_t *pos)
-{
- ++*pos;
- return c_start(m, pos);
-}
-static void c_stop(struct seq_file *m, void *v)
-{
-}
-struct seq_operations cpuinfo_op = {
- .start =c_start,
- .next = c_next,
- .stop = c_stop,
- .show = show_cpuinfo,
-};
-
-/*
- * These three variables are used to save values passed to us by prom_init()
- * via the device tree. The TCE variables are needed because with a memory_limit
- * in force we may need to explicitly map the TCE are at the top of RAM.
- */
-unsigned long memory_limit;
-unsigned long tce_alloc_start;
-unsigned long tce_alloc_end;
-
-#ifdef CONFIG_PPC_ISERIES
-/*
- * On iSeries we just parse the mem=X option from the command line.
- * On pSeries it's a bit more complicated, see prom_init_mem()
- */
-static int __init early_parsemem(char *p)
-{
- if (!p)
- return 0;
-
- memory_limit = ALIGN(memparse(p, &p), PAGE_SIZE);
-
- return 0;
-}
-early_param("mem", early_parsemem);
-#endif /* CONFIG_PPC_ISERIES */
-
-#ifdef CONFIG_PPC_MULTIPLATFORM
-static int __init set_preferred_console(void)
-{
- struct device_node *prom_stdout = NULL;
- char *name;
- u32 *spd;
- int offset = 0;
-
- DBG(" -> set_preferred_console()\n");
-
- /* The user has requested a console so this is already set up. */
- if (strstr(saved_command_line, "console=")) {
- DBG(" console was specified !\n");
- return -EBUSY;
- }
-
- if (!of_chosen) {
- DBG(" of_chosen is NULL !\n");
- return -ENODEV;
- }
- /* We are getting a weird phandle from OF ... */
- /* ... So use the full path instead */
- name = (char *)get_property(of_chosen, "linux,stdout-path", NULL);
- if (name == NULL) {
- DBG(" no linux,stdout-path !\n");
- return -ENODEV;
- }
- prom_stdout = of_find_node_by_path(name);
- if (!prom_stdout) {
- DBG(" can't find stdout package %s !\n", name);
- return -ENODEV;
- }
- DBG("stdout is %s\n", prom_stdout->full_name);
-
- name = (char *)get_property(prom_stdout, "name", NULL);
- if (!name) {
- DBG(" stdout package has no name !\n");
- goto not_found;
- }
- spd = (u32 *)get_property(prom_stdout, "current-speed", NULL);
-
- if (0)
- ;
-#ifdef CONFIG_SERIAL_8250_CONSOLE
- else if (strcmp(name, "serial") == 0) {
- int i;
- u32 *reg = (u32 *)get_property(prom_stdout, "reg", &i);
- if (i > 8) {
- switch (reg[1]) {
- case 0x3f8:
- offset = 0;
- break;
- case 0x2f8:
- offset = 1;
- break;
- case 0x898:
- offset = 2;
- break;
- case 0x890:
- offset = 3;
- break;
- default:
- /* We dont recognise the serial port */
- goto not_found;
- }
- }
- }
-#endif /* CONFIG_SERIAL_8250_CONSOLE */
-#ifdef CONFIG_PPC_PSERIES
- else if (strcmp(name, "vty") == 0) {
- u32 *reg = (u32 *)get_property(prom_stdout, "reg", NULL);
- char *compat = (char *)get_property(prom_stdout, "compatible", NULL);
-
- if (reg && compat && (strcmp(compat, "hvterm-protocol") == 0)) {
- /* Host Virtual Serial Interface */
- int offset;
- switch (reg[0]) {
- case 0x30000000:
- offset = 0;
- break;
- case 0x30000001:
- offset = 1;
- break;
- default:
- goto not_found;
- }
- of_node_put(prom_stdout);
- DBG("Found hvsi console at offset %d\n", offset);
- return add_preferred_console("hvsi", offset, NULL);
- } else {
- /* pSeries LPAR virtual console */
- of_node_put(prom_stdout);
- DBG("Found hvc console\n");
- return add_preferred_console("hvc", 0, NULL);
- }
- }
-#endif /* CONFIG_PPC_PSERIES */
-#ifdef CONFIG_SERIAL_PMACZILOG_CONSOLE
- else if (strcmp(name, "ch-a") == 0)
- offset = 0;
- else if (strcmp(name, "ch-b") == 0)
- offset = 1;
-#endif /* CONFIG_SERIAL_PMACZILOG_CONSOLE */
- else
- goto not_found;
- of_node_put(prom_stdout);
-
- DBG("Found serial console at ttyS%d\n", offset);
-
- if (spd) {
- static char __initdata opt[16];
- sprintf(opt, "%d", *spd);
- return add_preferred_console("ttyS", offset, opt);
- } else
- return add_preferred_console("ttyS", offset, NULL);
-
- not_found:
- DBG("No preferred console found !\n");
- of_node_put(prom_stdout);
- return -ENODEV;
-}
-console_initcall(set_preferred_console);
-#endif /* CONFIG_PPC_MULTIPLATFORM */
-
-#ifdef CONFIG_IRQSTACKS
-static void __init irqstack_early_init(void)
-{
- unsigned int i;
-
- /*
- * interrupt stacks must be under 256MB, we cannot afford to take
- * SLB misses on them.
- */
- for_each_cpu(i) {
- softirq_ctx[i] = (struct thread_info *)__va(lmb_alloc_base(THREAD_SIZE,
- THREAD_SIZE, 0x10000000));
- hardirq_ctx[i] = (struct thread_info *)__va(lmb_alloc_base(THREAD_SIZE,
- THREAD_SIZE, 0x10000000));
- }
-}
-#else
-#define irqstack_early_init()
-#endif
-
-/*
- * Stack space used when we detect a bad kernel stack pointer, and
- * early in SMP boots before relocation is enabled.
- */
-static void __init emergency_stack_init(void)
-{
- unsigned long limit;
- unsigned int i;
-
- /*
- * Emergency stacks must be under 256MB, we cannot afford to take
- * SLB misses on them. The ABI also requires them to be 128-byte
- * aligned.
- *
- * Since we use these as temporary stacks during secondary CPU
- * bringup, we need to get at them in real mode. This means they
- * must also be within the RMO region.
- */
- limit = min(0x10000000UL, lmb.rmo_size);
-
- for_each_cpu(i)
- paca[i].emergency_sp = __va(lmb_alloc_base(PAGE_SIZE, 128,
- limit)) + PAGE_SIZE;
-}
-
-/*
- * Called from setup_arch to initialize the bitmap of available
- * syscalls in the systemcfg page
- */
-void __init setup_syscall_map(void)
-{
- unsigned int i, count64 = 0, count32 = 0;
- extern unsigned long *sys_call_table;
- extern unsigned long *sys_call_table32;
- extern unsigned long sys_ni_syscall;
-
-
- for (i = 0; i < __NR_syscalls; i++) {
- if (sys_call_table[i] == sys_ni_syscall)
- continue;
- count64++;
- systemcfg->syscall_map_64[i >> 5] |= 0x80000000UL >> (i & 0x1f);
- }
- for (i = 0; i < __NR_syscalls; i++) {
- if (sys_call_table32[i] == sys_ni_syscall)
- continue;
- count32++;
- systemcfg->syscall_map_32[i >> 5] |= 0x80000000UL >> (i & 0x1f);
- }
- printk(KERN_INFO "Syscall map setup, %d 32 bits and %d 64 bits syscalls\n",
- count32, count64);
-}
-
-/*
- * Called into from start_kernel, after lock_kernel has been called.
- * Initializes bootmem, which is unsed to manage page allocation until
- * mem_init is called.
- */
-void __init setup_arch(char **cmdline_p)
-{
- extern void do_init_bootmem(void);
-
- ppc64_boot_msg(0x12, "Setup Arch");
-
- *cmdline_p = cmd_line;
-
- /*
- * Set cache line size based on type of cpu as a default.
- * Systems with OF can look in the properties on the cpu node(s)
- * for a possibly more accurate value.
- */
- dcache_bsize = ppc64_caches.dline_size;
- icache_bsize = ppc64_caches.iline_size;
-
- /* reboot on panic */
- panic_timeout = 180;
-
- if (ppc_md.panic)
- notifier_chain_register(&panic_notifier_list, &ppc64_panic_block);
-
- init_mm.start_code = PAGE_OFFSET;
- init_mm.end_code = (unsigned long) _etext;
- init_mm.end_data = (unsigned long) _edata;
- init_mm.brk = klimit;
-
- irqstack_early_init();
- emergency_stack_init();
-
- stabs_alloc();
-
- /* set up the bootmem stuff with available memory */
- do_init_bootmem();
- sparse_init();
-
- /* initialize the syscall map in systemcfg */
- setup_syscall_map();
-
-#ifdef CONFIG_DUMMY_CONSOLE
- conswitchp = &dummy_con;
-#endif
-
- ppc_md.setup_arch();
-
- /* Use the default idle loop if the platform hasn't provided one. */
- if (NULL == ppc_md.idle_loop) {
- ppc_md.idle_loop = default_idle;
- printk(KERN_INFO "Using default idle loop\n");
- }
-
- paging_init();
- ppc64_boot_msg(0x15, "Setup Done");
-}
-
-
-/* ToDo: do something useful if ppc_md is not yet setup. */
-#define PPC64_LINUX_FUNCTION 0x0f000000
-#define PPC64_IPL_MESSAGE 0xc0000000
-#define PPC64_TERM_MESSAGE 0xb0000000
-
-static void ppc64_do_msg(unsigned int src, const char *msg)
-{
- if (ppc_md.progress) {
- char buf[128];
-
- sprintf(buf, "%08X\n", src);
- ppc_md.progress(buf, 0);
- snprintf(buf, 128, "%s", msg);
- ppc_md.progress(buf, 0);
- }
-}
-
-/* Print a boot progress message. */
-void ppc64_boot_msg(unsigned int src, const char *msg)
-{
- ppc64_do_msg(PPC64_LINUX_FUNCTION|PPC64_IPL_MESSAGE|src, msg);
- printk("[boot]%04x %s\n", src, msg);
-}
-
-/* Print a termination message (print only -- does not stop the kernel) */
-void ppc64_terminate_msg(unsigned int src, const char *msg)
-{
- ppc64_do_msg(PPC64_LINUX_FUNCTION|PPC64_TERM_MESSAGE|src, msg);
- printk("[terminate]%04x %s\n", src, msg);
-}
-
-#ifndef CONFIG_PPC_ISERIES
-/*
- * This function can be used by platforms to "find" legacy serial ports.
- * It works for "serial" nodes under an "isa" node, and will try to
- * respect the "ibm,aix-loc" property if any. It works with up to 8
- * ports.
- */
-
-#define MAX_LEGACY_SERIAL_PORTS 8
-static struct plat_serial8250_port serial_ports[MAX_LEGACY_SERIAL_PORTS+1];
-static unsigned int old_serial_count;
-
-void __init generic_find_legacy_serial_ports(u64 *physport,
- unsigned int *default_speed)
-{
- struct device_node *np;
- u32 *sizeprop;
-
- struct isa_reg_property {
- u32 space;
- u32 address;
- u32 size;
- };
- struct pci_reg_property {
- struct pci_address addr;
- u32 size_hi;
- u32 size_lo;
- };
-
- DBG(" -> generic_find_legacy_serial_port()\n");
-
- *physport = 0;
- if (default_speed)
- *default_speed = 0;
-
- np = of_find_node_by_path("/");
- if (!np)
- return;
-
- /* First fill our array */
- for (np = NULL; (np = of_find_node_by_type(np, "serial"));) {
- struct device_node *isa, *pci;
- struct isa_reg_property *reg;
- unsigned long phys_size, addr_size, io_base;
- u32 *rangesp;
- u32 *interrupts, *clk, *spd;
- char *typep;
- int index, rlen, rentsize;
-
- /* Ok, first check if it's under an "isa" parent */
- isa = of_get_parent(np);
- if (!isa || strcmp(isa->name, "isa")) {
- DBG("%s: no isa parent found\n", np->full_name);
- continue;
- }
-
- /* Now look for an "ibm,aix-loc" property that gives us ordering
- * if any...
- */
- typep = (char *)get_property(np, "ibm,aix-loc", NULL);
-
- /* Get the ISA port number */
- reg = (struct isa_reg_property *)get_property(np, "reg", NULL);
- if (reg == NULL)
- goto next_port;
- /* We assume the interrupt number isn't translated ... */
- interrupts = (u32 *)get_property(np, "interrupts", NULL);
- /* get clock freq. if present */
- clk = (u32 *)get_property(np, "clock-frequency", NULL);
- /* get default speed if present */
- spd = (u32 *)get_property(np, "current-speed", NULL);
- /* Default to locate at end of array */
- index = old_serial_count; /* end of the array by default */
-
- /* If we have a location index, then use it */
- if (typep && *typep == 'S') {
- index = simple_strtol(typep+1, NULL, 0) - 1;
- /* if index is out of range, use end of array instead */
- if (index >= MAX_LEGACY_SERIAL_PORTS)
- index = old_serial_count;
- /* if our index is still out of range, that mean that
- * array is full, we could scan for a free slot but that
- * make little sense to bother, just skip the port
- */
- if (index >= MAX_LEGACY_SERIAL_PORTS)
- goto next_port;
- if (index >= old_serial_count)
- old_serial_count = index + 1;
- /* Check if there is a port who already claimed our slot */
- if (serial_ports[index].iobase != 0) {
- /* if we still have some room, move it, else override */
- if (old_serial_count < MAX_LEGACY_SERIAL_PORTS) {
- DBG("Moved legacy port %d -> %d\n", index,
- old_serial_count);
- serial_ports[old_serial_count++] =
- serial_ports[index];
- } else {
- DBG("Replacing legacy port %d\n", index);
- }
- }
- }
- if (index >= MAX_LEGACY_SERIAL_PORTS)
- goto next_port;
- if (index >= old_serial_count)
- old_serial_count = index + 1;
-
- /* Now fill the entry */
- memset(&serial_ports[index], 0, sizeof(struct plat_serial8250_port));
- serial_ports[index].uartclk = clk ? *clk : BASE_BAUD * 16;
- serial_ports[index].iobase = reg->address;
- serial_ports[index].irq = interrupts ? interrupts[0] : 0;
- serial_ports[index].flags = ASYNC_BOOT_AUTOCONF;
-
- DBG("Added legacy port, index: %d, port: %x, irq: %d, clk: %d\n",
- index,
- serial_ports[index].iobase,
- serial_ports[index].irq,
- serial_ports[index].uartclk);
-
- /* Get phys address of IO reg for port 1 */
- if (index != 0)
- goto next_port;
-
- pci = of_get_parent(isa);
- if (!pci) {
- DBG("%s: no pci parent found\n", np->full_name);
- goto next_port;
- }
-
- rangesp = (u32 *)get_property(pci, "ranges", &rlen);
- if (rangesp == NULL) {
- of_node_put(pci);
- goto next_port;
- }
- rlen /= 4;
-
- /* we need the #size-cells of the PCI bridge node itself */
- phys_size = 1;
- sizeprop = (u32 *)get_property(pci, "#size-cells", NULL);
- if (sizeprop != NULL)
- phys_size = *sizeprop;
- /* we need the parent #addr-cells */
- addr_size = prom_n_addr_cells(pci);
- rentsize = 3 + addr_size + phys_size;
- io_base = 0;
- for (;rlen >= rentsize; rlen -= rentsize,rangesp += rentsize) {
- if (((rangesp[0] >> 24) & 0x3) != 1)
- continue; /* not IO space */
- io_base = rangesp[3];
- if (addr_size == 2)
- io_base = (io_base << 32) | rangesp[4];
- }
- if (io_base != 0) {
- *physport = io_base + reg->address;
- if (default_speed && spd)
- *default_speed = *spd;
- }
- of_node_put(pci);
- next_port:
- of_node_put(isa);
- }
-
- DBG(" <- generic_find_legacy_serial_port()\n");
-}
-
-static struct platform_device serial_device = {
- .name = "serial8250",
- .id = PLAT8250_DEV_PLATFORM,
- .dev = {
- .platform_data = serial_ports,
- },
-};
-
-static int __init serial_dev_init(void)
-{
- return platform_device_register(&serial_device);
-}
-arch_initcall(serial_dev_init);
-
-#endif /* CONFIG_PPC_ISERIES */
-
-int check_legacy_ioport(unsigned long base_port)
-{
- if (ppc_md.check_legacy_ioport == NULL)
- return 0;
- return ppc_md.check_legacy_ioport(base_port);
-}
-EXPORT_SYMBOL(check_legacy_ioport);
-
-#ifdef CONFIG_XMON
-static int __init early_xmon(char *p)
-{
- /* ensure xmon is enabled */
- if (p) {
- if (strncmp(p, "on", 2) == 0)
- xmon_init(1);
- if (strncmp(p, "off", 3) == 0)
- xmon_init(0);
- if (strncmp(p, "early", 5) != 0)
- return 0;
- }
- xmon_init(1);
- debugger(NULL);
-
- return 0;
-}
-early_param("xmon", early_xmon);
-#endif
-
-void cpu_die(void)
-{
- if (ppc_md.cpu_die)
- ppc_md.cpu_die();
-}