summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorLinus Walleij <linus.walleij@linaro.org>2011-03-07 11:48:15 +0100
committerLinus Walleij <linus.walleij@linaro.org>2011-03-28 08:54:23 +0200
commitfe67dfc874da094bbbfbb73e74924d414b96105b (patch)
treea1375a23a31abf50388471e02814b3bbe9842aa4
parentdfa3a824de631e6833ffa9a7befc08186b027799 (diff)
mach-ux500: configure board for the TPS61052 regulator v2
This registers the TPS61052 regulator to the ux500 MOP/HREF boards. Cc: Samuel Ortiz <samuel.ortiz@intel.com> Cc: Liam Girdwood <lrg@slimlogic.co.uk> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Ola Lilja <ola.o.lilja@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-rw-r--r--arch/arm/mach-ux500/Kconfig1
-rw-r--r--arch/arm/mach-ux500/board-mop500-regulators.c24
-rw-r--r--arch/arm/mach-ux500/board-mop500-regulators.h1
-rw-r--r--arch/arm/mach-ux500/board-mop500.c23
4 files changed, 48 insertions, 1 deletions
diff --git a/arch/arm/mach-ux500/Kconfig b/arch/arm/mach-ux500/Kconfig
index 203b986280f..58626013aa3 100644
--- a/arch/arm/mach-ux500/Kconfig
+++ b/arch/arm/mach-ux500/Kconfig
@@ -23,6 +23,7 @@ menu "Ux500 target platform"
config MACH_U8500
bool "U8500 Development platform"
depends on UX500_SOC_DB8500
+ select TPS6105X
help
Include support for the mop500 development platform.
diff --git a/arch/arm/mach-ux500/board-mop500-regulators.c b/arch/arm/mach-ux500/board-mop500-regulators.c
index d4f33ebaf63..9ed0f90cfe2 100644
--- a/arch/arm/mach-ux500/board-mop500-regulators.c
+++ b/arch/arm/mach-ux500/board-mop500-regulators.c
@@ -13,6 +13,30 @@
#include <linux/regulator/ab8500.h>
#include "board-mop500-regulators.h"
+/*
+ * TPS61052 regulator
+ */
+static struct regulator_consumer_supply tps61052_vaudio_consumers[] = {
+ /*
+ * Boost converter supply to raise voltage on audio speaker, this
+ * is actually connected to three pins, VInVhfL (left amplifier)
+ * VInVhfR (right amplifier) and VIntDClassInt - all three must
+ * be connected to the same voltage.
+ */
+ REGULATOR_SUPPLY("vintdclassint", "ab8500-codec.0"),
+};
+
+struct regulator_init_data tps61052_regulator = {
+ .constraints = {
+ .name = "vaudio-hf",
+ .min_uV = 4500000,
+ .max_uV = 4500000,
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(tps61052_vaudio_consumers),
+ .consumer_supplies = tps61052_vaudio_consumers,
+};
+
static struct regulator_consumer_supply ab8500_vaux1_consumers[] = {
/* External displays, connector on board 2v5 power supply */
REGULATOR_SUPPLY("vaux12v5", "mcde.0"),
diff --git a/arch/arm/mach-ux500/board-mop500-regulators.h b/arch/arm/mach-ux500/board-mop500-regulators.h
index f979b892e4f..94992158d96 100644
--- a/arch/arm/mach-ux500/board-mop500-regulators.h
+++ b/arch/arm/mach-ux500/board-mop500-regulators.h
@@ -17,5 +17,6 @@
extern struct ab8500_regulator_reg_init
ab8500_regulator_reg_init[AB8500_NUM_REGULATOR_REGISTERS];
extern struct regulator_init_data ab8500_regulators[AB8500_NUM_REGULATORS];
+extern struct regulator_init_data tps61052_regulator;
#endif
diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c
index a10abc7d8ee..dc8746d7826 100644
--- a/arch/arm/mach-ux500/board-mop500.c
+++ b/arch/arm/mach-ux500/board-mop500.c
@@ -22,6 +22,7 @@
#include <linux/mfd/ab8500.h>
#include <linux/regulator/ab8500.h>
#include <linux/mfd/tc3589x.h>
+#include <linux/mfd/tps6105x.h>
#include <linux/mfd/ab8500/gpio.h>
#include <linux/leds-lp5521.h>
#include <linux/input.h>
@@ -93,6 +94,15 @@ struct platform_device ab8500_device = {
};
/*
+ * TPS61052
+ */
+
+static struct tps6105x_platform_data mop500_tps61052_data = {
+ .mode = TPS6105X_MODE_VOLTAGE,
+ .regulator_data = &tps61052_regulator,
+};
+
+/*
* TC35892
*/
@@ -162,7 +172,7 @@ static struct lp5521_platform_data __initdata lp5521_sec_data = {
.clock_mode = LP5521_CLOCK_EXT,
};
-static struct i2c_board_info mop500_i2c0_devices[] = {
+static struct i2c_board_info __initdata mop500_i2c0_devices[] = {
{
I2C_BOARD_INFO("tc3589x", 0x42),
.irq = NOMADIK_GPIO_TO_IRQ(217),
@@ -170,6 +180,14 @@ static struct i2c_board_info mop500_i2c0_devices[] = {
},
};
+/* I2C0 devices only available prior to HREFv60 */
+static struct i2c_board_info __initdata mop500_i2c0_old_devices[] = {
+ {
+ I2C_BOARD_INFO("tps61052", 0x33),
+ .platform_data = &mop500_tps61052_data,
+ },
+};
+
static struct i2c_board_info __initdata mop500_i2c2_devices[] = {
{
/* lp5521 LED driver, 1st device */
@@ -432,6 +450,9 @@ static void __init mop500_init_machine(void)
i2c_register_board_info(0, mop500_i2c0_devices,
ARRAY_SIZE(mop500_i2c0_devices));
+ if (!machine_is_hrefv60())
+ i2c_register_board_info(0, mop500_i2c0_old_devices,
+ ARRAY_SIZE(mop500_i2c0_old_devices));
i2c_register_board_info(2, mop500_i2c2_devices,
ARRAY_SIZE(mop500_i2c2_devices));
}