arm: omap: usb: create common enums and structures for ehci and ohci

Create the ehci and ohci specific platform data structures.
The port enum values are made common for both ehci and ohci.

Signed-off-by: Keshava Munegowda <keshava_mgowda@ti.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>

22 files changed, 184 insertions, 168 deletions

diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c
index d4e41ef86aa..a991aeb5609 100644
--- a/arch/arm/mach-omap2/board-3430sdp.c
+++ b/arch/arm/mach-omap2/board-3430sdp.c
@@ -653,11 +653,11 @@ static void enable_board_wakeup_source(void)
 		OMAP_WAKEUP_EN | OMAP_PIN_INPUT_PULLUP);
 }
 
-static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
+static const struct usbhs_omap_board_data usbhs_bdata __initconst = {
 
-	.port_mode[0] = EHCI_HCD_OMAP_MODE_PHY,
-	.port_mode[1] = EHCI_HCD_OMAP_MODE_PHY,
-	.port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN,
+	.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
+	.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
+	.port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
 
 	.phy_reset  = true,
 	.reset_gpio_port[0]  = 57,
@@ -816,7 +816,7 @@ static void __init omap_3430sdp_init(void)
 	board_flash_init(sdp_flash_partitions, chip_sel_3430);
 	sdp3430_display_init();
 	enable_board_wakeup_source();
-	usb_ehci_init(&ehci_pdata);
+	usb_ehci_init(&usbhs_bdata);
 }
 
 MACHINE_START(OMAP_3430SDP, "OMAP3430 3430SDP board")
diff --git a/arch/arm/mach-omap2/board-3630sdp.c b/arch/arm/mach-omap2/board-3630sdp.c
index 62645640f5e..03fd8aca3cc 100644
--- a/arch/arm/mach-omap2/board-3630sdp.c
+++ b/arch/arm/mach-omap2/board-3630sdp.c
@@ -54,11 +54,11 @@ static void enable_board_wakeup_source(void)
 		OMAP_WAKEUP_EN | OMAP_PIN_INPUT_PULLUP);
 }
 
-static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
+static const struct usbhs_omap_board_data usbhs_bdata __initconst = {
 
-	.port_mode[0] = EHCI_HCD_OMAP_MODE_PHY,
-	.port_mode[1] = EHCI_HCD_OMAP_MODE_PHY,
-	.port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN,
+	.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
+	.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
+	.port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
 
 	.phy_reset  = true,
 	.reset_gpio_port[0]  = 126,
@@ -211,7 +211,7 @@ static void __init omap_sdp_init(void)
 	board_smc91x_init();
 	board_flash_init(sdp_flash_partitions, chip_sel_sdp);
 	enable_board_wakeup_source();
-	usb_ehci_init(&ehci_pdata);
+	usb_ehci_init(&usbhs_bdata);
 }
 
 MACHINE_START(OMAP_3630SDP, "OMAP 3630SDP board")
diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c
index 9cf8e333255..0e1609d3fa8 100644
--- a/arch/arm/mach-omap2/board-4430sdp.c
+++ b/arch/arm/mach-omap2/board-4430sdp.c
@@ -251,10 +251,10 @@ static void __init omap_4430sdp_init_irq(void)
 	gic_init_irq();
 }
 
-static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
-	.port_mode[0]	= EHCI_HCD_OMAP_MODE_PHY,
-	.port_mode[1]	= EHCI_HCD_OMAP_MODE_UNKNOWN,
-	.port_mode[2]	= EHCI_HCD_OMAP_MODE_UNKNOWN,
+static const struct usbhs_omap_board_data usbhs_bdata __initconst = {
+	.port_mode[0]	= OMAP_EHCI_PORT_MODE_PHY,
+	.port_mode[1]	= OMAP_USBHS_PORT_MODE_UNUSED,
+	.port_mode[2]	= OMAP_USBHS_PORT_MODE_UNUSED,
 	.phy_reset	= false,
 	.reset_gpio_port[0]  = -EINVAL,
 	.reset_gpio_port[1]  = -EINVAL,
@@ -584,7 +584,7 @@ static void __init omap_4430sdp_init(void)
 	else
 		gpio_direction_output(OMAP4SDP_MDM_PWR_EN_GPIO, 1);
 
-	usb_ehci_init(&ehci_pdata);
+	usb_ehci_init(&usbhs_bdata);
 	usb_musb_init(&musb_board_data);
 
 	status = omap_ethernet_init();
diff --git a/arch/arm/mach-omap2/board-am3517crane.c b/arch/arm/mach-omap2/board-am3517crane.c
index 71acb5ab281..1b825a00c5b 100644
--- a/arch/arm/mach-omap2/board-am3517crane.c
+++ b/arch/arm/mach-omap2/board-am3517crane.c
@@ -59,10 +59,10 @@ static void __init am3517_crane_init_irq(void)
 	omap_init_irq();
 }
 
-static struct ehci_hcd_omap_platform_data ehci_pdata __initdata = {
-	.port_mode[0] = EHCI_HCD_OMAP_MODE_PHY,
-	.port_mode[1] = EHCI_HCD_OMAP_MODE_UNKNOWN,
-	.port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN,
+static struct usbhs_omap_board_data usbhs_bdata __initdata = {
+	.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
+	.port_mode[1] = OMAP_USBHS_PORT_MODE_UNUSED,
+	.port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
 
 	.phy_reset  = true,
 	.reset_gpio_port[0]  = GPIO_USB_NRESET,
@@ -103,7 +103,7 @@ static void __init am3517_crane_init(void)
 		return;
 	}
 
-	usb_ehci_init(&ehci_pdata);
+	usb_ehci_init(&usbhs_bdata);
 }
 
 MACHINE_START(CRANEBOARD, "AM3517/05 CRANEBOARD")
diff --git a/arch/arm/mach-omap2/board-am3517evm.c b/arch/arm/mach-omap2/board-am3517evm.c
index 10d60b7743c..f5bc1c6ccf5 100644
--- a/arch/arm/mach-omap2/board-am3517evm.c
+++ b/arch/arm/mach-omap2/board-am3517evm.c
@@ -430,15 +430,15 @@ static __init void am3517_evm_musb_init(void)
 	usb_musb_init(&musb_board_data);
 }
 
-static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
-	.port_mode[0] = EHCI_HCD_OMAP_MODE_PHY,
+static const struct usbhs_omap_board_data usbhs_bdata __initconst = {
+	.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
 #if defined(CONFIG_PANEL_SHARP_LQ043T1DG01) || \
 		defined(CONFIG_PANEL_SHARP_LQ043T1DG01_MODULE)
-	.port_mode[1] = EHCI_HCD_OMAP_MODE_UNKNOWN,
+	.port_mode[1] = OMAP_USBHS_PORT_MODE_UNUSED,
 #else
-	.port_mode[1] = EHCI_HCD_OMAP_MODE_PHY,
+	.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
 #endif
-	.port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN,
+	.port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
 
 	.phy_reset  = true,
 	.reset_gpio_port[0]  = 57,
@@ -502,7 +502,7 @@ static void __init am3517_evm_init(void)
 
 	/* Configure GPIO for EHCI port */
 	omap_mux_init_gpio(57, OMAP_PIN_OUTPUT);
-	usb_ehci_init(&ehci_pdata);
+	usb_ehci_init(&usbhs_bdata);
 	am3517_evm_hecc_init(&am3517_evm_hecc_pdata);
 	/* DSS */
 	am3517_evm_display_init();
diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c
index dac14161066..c79aa9be72f 100644
--- a/arch/arm/mach-omap2/board-cm-t35.c
+++ b/arch/arm/mach-omap2/board-cm-t35.c
@@ -605,10 +605,10 @@ static struct omap2_hsmmc_info mmc[] = {
 	{}	/* Terminator */
 };
 
-static struct ehci_hcd_omap_platform_data ehci_pdata __initdata = {
-	.port_mode[0] = EHCI_HCD_OMAP_MODE_PHY,
-	.port_mode[1] = EHCI_HCD_OMAP_MODE_PHY,
-	.port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN,
+static struct usbhs_omap_board_data usbhs_bdata __initdata = {
+	.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
+	.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
+	.port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
 
 	.phy_reset  = true,
 	.reset_gpio_port[0]  = OMAP_MAX_GPIO_LINES + 6,
@@ -810,7 +810,7 @@ static void __init cm_t35_init(void)
 	cm_t35_init_display();
 
 	usb_musb_init(&musb_board_data);
-	usb_ehci_init(&ehci_pdata);
+	usb_ehci_init(&usbhs_bdata);
 }
 
 MACHINE_START(CM_T35, "Compulab CM-T35")
diff --git a/arch/arm/mach-omap2/board-cm-t3517.c b/arch/arm/mach-omap2/board-cm-t3517.c
index 8f9a64d650e..8288a0b9159 100644
--- a/arch/arm/mach-omap2/board-cm-t3517.c
+++ b/arch/arm/mach-omap2/board-cm-t3517.c
@@ -167,10 +167,10 @@ static inline void cm_t3517_init_rtc(void) {}
 #define HSUSB2_RESET_GPIO	(147)
 #define USB_HUB_RESET_GPIO	(152)
 
-static struct ehci_hcd_omap_platform_data cm_t3517_ehci_pdata __initdata = {
-	.port_mode[0] = EHCI_HCD_OMAP_MODE_PHY,
-	.port_mode[1] = EHCI_HCD_OMAP_MODE_PHY,
-	.port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN,
+static struct usbhs_omap_board_data cm_t3517_ehci_pdata __initdata = {
+	.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
+	.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
+	.port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
 
 	.phy_reset  = true,
 	.reset_gpio_port[0]  = HSUSB1_RESET_GPIO,
diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c
index 9a2a31e011c..e0131dda579 100644
--- a/arch/arm/mach-omap2/board-devkit8000.c
+++ b/arch/arm/mach-omap2/board-devkit8000.c
@@ -620,11 +620,11 @@ static struct omap_musb_board_data musb_board_data = {
 	.power			= 100,
 };
 
-static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
+static const struct usbhs_omap_board_data usbhs_bdata __initconst = {
 
-	.port_mode[0] = EHCI_HCD_OMAP_MODE_PHY,
-	.port_mode[1] = EHCI_HCD_OMAP_MODE_UNKNOWN,
-	.port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN,
+	.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
+	.port_mode[1] = OMAP_USBHS_PORT_MODE_UNUSED,
+	.port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
 
 	.phy_reset  = true,
 	.reset_gpio_port[0]  = -EINVAL,
@@ -803,7 +803,7 @@ static void __init devkit8000_init(void)
 	devkit8000_ads7846_init();
 
 	usb_musb_init(&musb_board_data);
-	usb_ehci_init(&ehci_pdata);
+	usb_ehci_init(&usbhs_bdata);
 	devkit8000_flash_init();
 
 	/* Ensure SDRC pins are mux'd for self-refresh */
diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c
index 3be85a1f55f..a9d7d1dc63a 100644
--- a/arch/arm/mach-omap2/board-igep0020.c
+++ b/arch/arm/mach-omap2/board-igep0020.c
@@ -627,10 +627,10 @@ static struct omap_musb_board_data musb_board_data = {
 	.power			= 100,
 };
 
-static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
-	.port_mode[0] = EHCI_HCD_OMAP_MODE_PHY,
-	.port_mode[1] = EHCI_HCD_OMAP_MODE_UNKNOWN,
-	.port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN,
+static const struct usbhs_omap_board_data usbhs_bdata __initconst = {
+	.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
+	.port_mode[1] = OMAP_USBHS_PORT_MODE_UNUSED,
+	.port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
 
 	.phy_reset = true,
 	.reset_gpio_port[0] = IGEP2_GPIO_USBH_NRESET,
@@ -699,7 +699,7 @@ static void __init igep2_init(void)
 	platform_add_devices(igep2_devices, ARRAY_SIZE(igep2_devices));
 	omap_serial_init();
 	usb_musb_init(&musb_board_data);
-	usb_ehci_init(&ehci_pdata);
+	usb_ehci_init(&usbhs_bdata);
 
 	igep2_flash_init();
 	igep2_leds_init();
diff --git a/arch/arm/mach-omap2/board-igep0030.c b/arch/arm/mach-omap2/board-igep0030.c
index 4dc62a9b9cb..1b441eafdba 100644
--- a/arch/arm/mach-omap2/board-igep0030.c
+++ b/arch/arm/mach-omap2/board-igep0030.c
@@ -408,10 +408,10 @@ static void __init igep3_wifi_bt_init(void)
 void __init igep3_wifi_bt_init(void) {}
 #endif
 
-static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
-	.port_mode[0] = EHCI_HCD_OMAP_MODE_UNKNOWN,
-	.port_mode[1] = EHCI_HCD_OMAP_MODE_PHY,
-	.port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN,
+static const struct usbhs_omap_board_data usbhs_bdata __initconst = {
+	.port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED,
+	.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
+	.port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
 
 	.phy_reset = true,
 	.reset_gpio_port[0] = -EINVAL,
@@ -435,7 +435,7 @@ static void __init igep3_init(void)
 	platform_add_devices(igep3_devices, ARRAY_SIZE(igep3_devices));
 	omap_serial_init();
 	usb_musb_init(&musb_board_data);
-	usb_ehci_init(&ehci_pdata);
+	usb_ehci_init(&usbhs_bdata);
 
 	igep3_flash_init();
 	igep3_leds_init();
diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
index 46d814ab565..b84a6418ec1 100644
--- a/arch/arm/mach-omap2/board-omap3beagle.c
+++ b/arch/arm/mach-omap2/board-omap3beagle.c
@@ -586,11 +586,11 @@ static void __init omap3beagle_flash_init(void)
 	}
 }
 
-static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
+static const struct usbhs_omap_board_data usbhs_bdata __initconst = {
 
-	.port_mode[0] = EHCI_HCD_OMAP_MODE_PHY,
-	.port_mode[1] = EHCI_HCD_OMAP_MODE_PHY,
-	.port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN,
+	.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
+	.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
+	.port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
 
 	.phy_reset  = true,
 	.reset_gpio_port[0]  = -EINVAL,
@@ -625,7 +625,7 @@ static void __init omap3_beagle_init(void)
 	gpio_direction_output(170, true);
 
 	usb_musb_init(&musb_board_data);
-	usb_ehci_init(&ehci_pdata);
+	usb_ehci_init(&usbhs_bdata);
 	omap3beagle_flash_init();
 
 	/* Ensure SDRC pins are mux'd for self-refresh */
diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c
index 323c3809ce3..ed5e4118147 100644
--- a/arch/arm/mach-omap2/board-omap3evm.c
+++ b/arch/arm/mach-omap2/board-omap3evm.c
@@ -638,11 +638,11 @@ static struct platform_device *omap3_evm_devices[] __initdata = {
 	&omap3_evm_dss_device,
 };
 
-static struct ehci_hcd_omap_platform_data ehci_pdata __initdata = {
+static struct usbhs_omap_board_data usbhs_bdata __initdata = {
 
-	.port_mode[0] = EHCI_HCD_OMAP_MODE_UNKNOWN,
-	.port_mode[1] = EHCI_HCD_OMAP_MODE_PHY,
-	.port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN,
+	.port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED,
+	.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
+	.port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
 
 	.phy_reset  = true,
 	/* PHY reset GPIO will be runtime programmed based on EVM version */
@@ -700,7 +700,7 @@ static void __init omap3_evm_init(void)
 
 		/* setup EHCI phy reset config */
 		omap_mux_init_gpio(21, OMAP_PIN_INPUT_PULLUP);
-		ehci_pdata.reset_gpio_port[1] = 21;
+		usbhs_bdata.reset_gpio_port[1] = 21;
 
 		/* EVM REV >= E can supply 500mA with EXTVBUS programming */
 		musb_board_data.power = 500;
@@ -708,10 +708,10 @@ static void __init omap3_evm_init(void)
 	} else {
 		/* setup EHCI phy reset on MDC */
 		omap_mux_init_gpio(135, OMAP_PIN_OUTPUT);
-		ehci_pdata.reset_gpio_port[1] = 135;
+		usbhs_bdata.reset_gpio_port[1] = 135;
 	}
 	usb_musb_init(&musb_board_data);
-	usb_ehci_init(&ehci_pdata);
+	usb_ehci_init(&usbhs_bdata);
 	ads7846_dev_init();
 	omap3evm_init_smsc911x();
 	omap3_evm_display_init();
diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c
index 0b34beded11..241e632a466 100644
--- a/arch/arm/mach-omap2/board-omap3pandora.c
+++ b/arch/arm/mach-omap2/board-omap3pandora.c
@@ -681,11 +681,11 @@ static struct platform_device *omap3pandora_devices[] __initdata = {
 	&pandora_vwlan_device,
 };
 
-static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
+static const struct usbhs_omap_board_data usbhs_bdata __initconst = {
 
-	.port_mode[0] = EHCI_HCD_OMAP_MODE_PHY,
-	.port_mode[1] = EHCI_HCD_OMAP_MODE_UNKNOWN,
-	.port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN,
+	.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
+	.port_mode[1] = OMAP_USBHS_PORT_MODE_UNUSED,
+	.port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
 
 	.phy_reset  = true,
 	.reset_gpio_port[0]  = 16,
@@ -716,7 +716,7 @@ static void __init omap3pandora_init(void)
 	spi_register_board_info(omap3pandora_spi_board_info,
 			ARRAY_SIZE(omap3pandora_spi_board_info));
 	omap3pandora_ads7846_init();
-	usb_ehci_init(&ehci_pdata);
+	usb_ehci_init(&usbhs_bdata);
 	usb_musb_init(&musb_board_data);
 	gpmc_nand_init(&pandora_nand_data);
 
diff --git a/arch/arm/mach-omap2/board-omap3stalker.c b/arch/arm/mach-omap2/board-omap3stalker.c
index 2a2dad447e8..eaad924b624 100644
--- a/arch/arm/mach-omap2/board-omap3stalker.c
+++ b/arch/arm/mach-omap2/board-omap3stalker.c
@@ -608,10 +608,10 @@ static struct platform_device *omap3_stalker_devices[] __initdata = {
 	&keys_gpio,
 };
 
-static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
-	.port_mode[0] = EHCI_HCD_OMAP_MODE_UNKNOWN,
-	.port_mode[1] = EHCI_HCD_OMAP_MODE_PHY,
-	.port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN,
+static struct usbhs_omap_board_data usbhs_bdata __initconst = {
+	.port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED,
+	.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
+	.port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
 
 	.phy_reset = true,
 	.reset_gpio_port[0] = -EINVAL,
@@ -649,7 +649,7 @@ static void __init omap3_stalker_init(void)
 
 	omap_serial_init();
 	usb_musb_init(&musb_board_data);
-	usb_ehci_init(&ehci_pdata);
+	usb_ehci_init(&usbhs_bdata);
 	ads7846_dev_init();
 
 	omap_mux_init_gpio(21, OMAP_PIN_OUTPUT);
diff --git a/arch/arm/mach-omap2/board-omap3touchbook.c b/arch/arm/mach-omap2/board-omap3touchbook.c
index db1f74fe6c4..4e3a1ae2ac9 100644
--- a/arch/arm/mach-omap2/board-omap3touchbook.c
+++ b/arch/arm/mach-omap2/board-omap3touchbook.c
@@ -468,11 +468,11 @@ static void __init omap3touchbook_flash_init(void)
 	}
 }
 
-static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
+static const struct usbhs_omap_board_data usbhs_bdata __initconst = {
 
-	.port_mode[0] = EHCI_HCD_OMAP_MODE_PHY,
-	.port_mode[1] = EHCI_HCD_OMAP_MODE_PHY,
-	.port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN,
+	.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
+	.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
+	.port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
 
 	.phy_reset  = true,
 	.reset_gpio_port[0]  = -EINVAL,
@@ -527,7 +527,7 @@ static void __init omap3_touchbook_init(void)
 				ARRAY_SIZE(omap3_ads7846_spi_board_info));
 	omap3_ads7846_init();
 	usb_musb_init(&musb_board_data);
-	usb_ehci_init(&ehci_pdata);
+	usb_ehci_init(&usbhs_bdata);
 	omap3touchbook_flash_init();
 
 	/* Ensure SDRC pins are mux'd for self-refresh */
diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c
index 77748f81366..b88c1909434 100644
--- a/arch/arm/mach-omap2/board-omap4panda.c
+++ b/arch/arm/mach-omap2/board-omap4panda.c
@@ -83,10 +83,10 @@ static void __init omap4_panda_init_irq(void)
 	gic_init_irq();
 }
 
-static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
-	.port_mode[0] = EHCI_HCD_OMAP_MODE_PHY,
-	.port_mode[1] = EHCI_HCD_OMAP_MODE_UNKNOWN,
-	.port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN,
+static const struct usbhs_omap_board_data usbhs_bdata __initconst = {
+	.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
+	.port_mode[1] = OMAP_USBHS_PORT_MODE_UNUSED,
+	.port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
 	.phy_reset  = false,
 	.reset_gpio_port[0]  = -EINVAL,
 	.reset_gpio_port[1]  = -EINVAL,
@@ -128,7 +128,7 @@ static void __init omap4_ehci_init(void)
 	gpio_set_value(GPIO_HUB_NRESET, 0);
 	gpio_set_value(GPIO_HUB_NRESET, 1);
 
-	usb_ehci_init(&ehci_pdata);
+	usb_ehci_init(&usbhs_bdata);
 
 	/* enable power to hub */
 	gpio_set_value(GPIO_HUB_POWER, 1);
diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c
index cb26e5d8268..f78b74c369d 100644
--- a/arch/arm/mach-omap2/board-overo.c
+++ b/arch/arm/mach-omap2/board-overo.c
@@ -423,10 +423,10 @@ static struct platform_device *overo_devices[] __initdata = {
 	&overo_lcd_device,
 };
 
-static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
-	.port_mode[0] = EHCI_HCD_OMAP_MODE_UNKNOWN,
-	.port_mode[1] = EHCI_HCD_OMAP_MODE_PHY,
-	.port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN,
+static const struct usbhs_omap_board_data usbhs_bdata __initconst = {
+	.port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED,
+	.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
+	.port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
 
 	.phy_reset  = true,
 	.reset_gpio_port[0]  = -EINVAL,
@@ -454,7 +454,7 @@ static void __init overo_init(void)
 	omap_serial_init();
 	overo_flash_init();
 	usb_musb_init(&musb_board_data);
-	usb_ehci_init(&ehci_pdata);
+	usb_ehci_init(&usbhs_bdata);
 	overo_ads7846_init();
 	overo_init_smsc911x();
 
diff --git a/arch/arm/mach-omap2/board-zoom.c b/arch/arm/mach-omap2/board-zoom.c
index e26754c24ee..19b99128df7 100644
--- a/arch/arm/mach-omap2/board-zoom.c
+++ b/arch/arm/mach-omap2/board-zoom.c
@@ -106,10 +106,10 @@ static struct mtd_partition zoom_nand_partitions[] = {
 	},
 };
 
-static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
-	.port_mode[0]		= EHCI_HCD_OMAP_MODE_UNKNOWN,
-	.port_mode[1]		= EHCI_HCD_OMAP_MODE_PHY,
-	.port_mode[2]		= EHCI_HCD_OMAP_MODE_UNKNOWN,
+static const struct usbhs_omap_board_data usbhs_bdata __initconst = {
+	.port_mode[0]		= OMAP_USBHS_PORT_MODE_UNUSED,
+	.port_mode[1]		= OMAP_EHCI_PORT_MODE_PHY,
+	.port_mode[2]		= OMAP_USBHS_PORT_MODE_UNUSED,
 	.phy_reset		= true,
 	.reset_gpio_port[0]	= -EINVAL,
 	.reset_gpio_port[1]	= ZOOM3_EHCI_RESET_GPIO,
@@ -123,7 +123,7 @@ static void __init omap_zoom_init(void)
 	} else if (machine_is_omap_zoom3()) {
 		omap3_mux_init(board_mux, OMAP_PACKAGE_CBP);
 		omap_mux_init_gpio(ZOOM3_EHCI_RESET_GPIO, OMAP_PIN_OUTPUT);
-		usb_ehci_init(&ehci_pdata);
+		usb_ehci_init(&usbhs_bdata);
 	}
 
 	board_nand_init(zoom_nand_partitions,
diff --git a/arch/arm/mach-omap2/usb-host.c b/arch/arm/mach-omap2/usb-host.c
index 45f9b80b6d2..b04ce6f8f01 100644
--- a/arch/arm/mach-omap2/usb-host.c
+++ b/arch/arm/mach-omap2/usb-host.c
@@ -64,10 +64,10 @@ static struct platform_device ehci_device = {
 /*
  * setup_ehci_io_mux - initialize IO pad mux for USBHOST
  */
-static void setup_ehci_io_mux(const enum ehci_hcd_omap_mode *port_mode)
+static void setup_ehci_io_mux(const enum usbhs_omap_port_mode *port_mode)
 {
 	switch (port_mode[0]) {
-	case EHCI_HCD_OMAP_MODE_PHY:
+	case OMAP_EHCI_PORT_MODE_PHY:
 		omap_mux_init_signal("hsusb1_stp", OMAP_PIN_OUTPUT);
 		omap_mux_init_signal("hsusb1_clk", OMAP_PIN_OUTPUT);
 		omap_mux_init_signal("hsusb1_dir", OMAP_PIN_INPUT_PULLDOWN);
@@ -81,7 +81,7 @@ static void setup_ehci_io_mux(const enum ehci_hcd_omap_mode *port_mode)
 		omap_mux_init_signal("hsusb1_data6", OMAP_PIN_INPUT_PULLDOWN);
 		omap_mux_init_signal("hsusb1_data7", OMAP_PIN_INPUT_PULLDOWN);
 		break;
-	case EHCI_HCD_OMAP_MODE_TLL:
+	case OMAP_EHCI_PORT_MODE_TLL:
 		omap_mux_init_signal("hsusb1_tll_stp",
 			OMAP_PIN_INPUT_PULLUP);
 		omap_mux_init_signal("hsusb1_tll_clk",
@@ -107,14 +107,14 @@ static void setup_ehci_io_mux(const enum ehci_hcd_omap_mode *port_mode)
 		omap_mux_init_signal("hsusb1_tll_data7",
 			OMAP_PIN_INPUT_PULLDOWN);
 		break;
-	case EHCI_HCD_OMAP_MODE_UNKNOWN:
+	case OMAP_USBHS_PORT_MODE_UNUSED:
 		/* FALLTHROUGH */
 	default:
 		break;
 	}
 
 	switch (port_mode[1]) {
-	case EHCI_HCD_OMAP_MODE_PHY:
+	case OMAP_EHCI_PORT_MODE_PHY:
 		omap_mux_init_signal("hsusb2_stp", OMAP_PIN_OUTPUT);
 		omap_mux_init_signal("hsusb2_clk", OMAP_PIN_OUTPUT);
 		omap_mux_init_signal("hsusb2_dir", OMAP_PIN_INPUT_PULLDOWN);
@@ -136,7 +136,7 @@ static void setup_ehci_io_mux(const enum ehci_hcd_omap_mode *port_mode)
 		omap_mux_init_signal("hsusb2_data7",
 			OMAP_PIN_INPUT_PULLDOWN);
 		break;
-	case EHCI_HCD_OMAP_MODE_TLL:
+	case OMAP_EHCI_PORT_MODE_TLL:
 		omap_mux_init_signal("hsusb2_tll_stp",
 			OMAP_PIN_INPUT_PULLUP);
 		omap_mux_init_signal("hsusb2_tll_clk",
@@ -162,17 +162,17 @@ static void setup_ehci_io_mux(const enum ehci_hcd_omap_mode *port_mode)
 		omap_mux_init_signal("hsusb2_tll_data7",
 			OMAP_PIN_INPUT_PULLDOWN);
 		break;
-	case EHCI_HCD_OMAP_MODE_UNKNOWN:
+	case OMAP_USBHS_PORT_MODE_UNUSED:
 		/* FALLTHROUGH */
 	default:
 		break;
 	}
 
 	switch (port_mode[2]) {
-	case EHCI_HCD_OMAP_MODE_PHY:
+	case OMAP_EHCI_PORT_MODE_PHY:
 		printk(KERN_WARNING "Port3 can't be used in PHY mode\n");
 		break;
-	case EHCI_HCD_OMAP_MODE_TLL:
+	case OMAP_EHCI_PORT_MODE_TLL:
 		omap_mux_init_signal("hsusb3_tll_stp",
 			OMAP_PIN_INPUT_PULLUP);
 		omap_mux_init_signal("hsusb3_tll_clk",
@@ -198,7 +198,7 @@ static void setup_ehci_io_mux(const enum ehci_hcd_omap_mode *port_mode)
 		omap_mux_init_signal("hsusb3_tll_data7",
 			OMAP_PIN_INPUT_PULLDOWN);
 		break;
-	case EHCI_HCD_OMAP_MODE_UNKNOWN:
+	case OMAP_USBHS_PORT_MODE_UNUSED:
 		/* FALLTHROUGH */
 	default:
 		break;
@@ -207,10 +207,10 @@ static void setup_ehci_io_mux(const enum ehci_hcd_omap_mode *port_mode)
 	return;
 }
 
-static void setup_4430ehci_io_mux(const enum ehci_hcd_omap_mode *port_mode)
+static void setup_4430ehci_io_mux(const enum usbhs_omap_port_mode *port_mode)
 {
 	switch (port_mode[0]) {
-	case EHCI_HCD_OMAP_MODE_PHY:
+	case OMAP_EHCI_PORT_MODE_PHY:
 		omap_mux_init_signal("usbb1_ulpiphy_stp",
 			OMAP_PIN_OUTPUT);
 		omap_mux_init_signal("usbb1_ulpiphy_clk",
@@ -236,7 +236,7 @@ static void setup_4430ehci_io_mux(const enum ehci_hcd_omap_mode *port_mode)
 		omap_mux_init_signal("usbb1_ulpiphy_dat7",
 			OMAP_PIN_INPUT_PULLDOWN);
 			break;
-	case EHCI_HCD_OMAP_MODE_TLL:
+	case OMAP_EHCI_PORT_MODE_TLL:
 		omap_mux_init_signal("usbb1_ulpitll_stp",
 			OMAP_PIN_INPUT_PULLUP);
 		omap_mux_init_signal("usbb1_ulpitll_clk",
@@ -262,12 +262,12 @@ static void setup_4430ehci_io_mux(const enum ehci_hcd_omap_mode *port_mode)
 		omap_mux_init_signal("usbb1_ulpitll_dat7",
 			OMAP_PIN_INPUT_PULLDOWN);
 			break;
-	case EHCI_HCD_OMAP_MODE_UNKNOWN:
+	case OMAP_USBHS_PORT_MODE_UNUSED:
 	default:
 			break;
 	}
 	switch (port_mode[1]) {
-	case EHCI_HCD_OMAP_MODE_PHY:
+	case OMAP_EHCI_PORT_MODE_PHY:
 		omap_mux_init_signal("usbb2_ulpiphy_stp",
 			OMAP_PIN_OUTPUT);
 		omap_mux_init_signal("usbb2_ulpiphy_clk",
@@ -293,7 +293,7 @@ static void setup_4430ehci_io_mux(const enum ehci_hcd_omap_mode *port_mode)
 		omap_mux_init_signal("usbb2_ulpiphy_dat7",
 			OMAP_PIN_INPUT_PULLDOWN);
 			break;
-	case EHCI_HCD_OMAP_MODE_TLL:
+	case OMAP_EHCI_PORT_MODE_TLL:
 		omap_mux_init_signal("usbb2_ulpitll_stp",
 			OMAP_PIN_INPUT_PULLUP);
 		omap_mux_init_signal("usbb2_ulpitll_clk",
@@ -319,13 +319,13 @@ static void setup_4430ehci_io_mux(const enum ehci_hcd_omap_mode *port_mode)
 		omap_mux_init_signal("usbb2_ulpitll_dat7",
 			OMAP_PIN_INPUT_PULLDOWN);
 			break;
-	case EHCI_HCD_OMAP_MODE_UNKNOWN:
+	case OMAP_USBHS_PORT_MODE_UNUSED:
 	default:
 			break;
 	}
 }
 
-void __init usb_ehci_init(const struct ehci_hcd_omap_platform_data *pdata)
+void __init usb_ehci_init(const struct usbhs_omap_board_data *pdata)
 {
 	platform_device_add_data(&ehci_device, pdata, sizeof(*pdata));
 
@@ -363,7 +363,7 @@ void __init usb_ehci_init(const struct ehci_hcd_omap_platform_data *pdata)
 
 #else
 
-void __init usb_ehci_init(const struct ehci_hcd_omap_platform_data *pdata)
+void __init usb_ehci_init(const struct usbhs_omap_board_data *pdata)
 
 {
 }
@@ -411,7 +411,7 @@ static struct platform_device ohci_device = {
 	.resource	= ohci_resources,
 };
 
-static void setup_ohci_io_mux(const enum ohci_omap3_port_mode *port_mode)
+static void setup_ohci_io_mux(const enum usbhs_omap_port_mode *port_mode)
 {
 	switch (port_mode[0]) {
 	case OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0:
@@ -439,7 +439,7 @@ static void setup_ohci_io_mux(const enum ohci_omap3_port_mode *port_mode)
 		omap_mux_init_signal("mm1_txdat",
 			OMAP_PIN_INPUT_PULLDOWN);
 		break;
-	case OMAP_OHCI_PORT_MODE_UNUSED:
+	case OMAP_USBHS_PORT_MODE_UNUSED:
 		/* FALLTHROUGH */
 	default:
 		break;
@@ -470,7 +470,7 @@ static void setup_ohci_io_mux(const enum ohci_omap3_port_mode *port_mode)
 		omap_mux_init_signal("mm2_txdat",
 			OMAP_PIN_INPUT_PULLDOWN);
 		break;
-	case OMAP_OHCI_PORT_MODE_UNUSED:
+	case OMAP_USBHS_PORT_MODE_UNUSED:
 		/* FALLTHROUGH */
 	default:
 		break;
@@ -501,14 +501,14 @@ static void setup_ohci_io_mux(const enum ohci_omap3_port_mode *port_mode)
 		omap_mux_init_signal("mm3_txdat",
 			OMAP_PIN_INPUT_PULLDOWN);
 		break;
-	case OMAP_OHCI_PORT_MODE_UNUSED:
+	case OMAP_USBHS_PORT_MODE_UNUSED:
 		/* FALLTHROUGH */
 	default:
 		break;
 	}
 }
 
-void __init usb_ohci_init(const struct ohci_hcd_omap_platform_data *pdata)
+void __init usb_ohci_init(const struct usbhs_omap_board_data *pdata)
 {
 	platform_device_add_data(&ohci_device, pdata, sizeof(*pdata));
 
@@ -524,7 +524,7 @@ void __init usb_ohci_init(const struct ohci_hcd_omap_platform_data *pdata)
 
 #else
 
-void __init usb_ohci_init(const struct ohci_hcd_omap_platform_data *pdata)
+void __init usb_ohci_init(const struct usbhs_omap_board_data *pdata)
 {
 }
 
diff --git a/arch/arm/plat-omap/include/plat/usb.h b/arch/arm/plat-omap/include/plat/usb.h
index f888e0e57dc..32dfe08023a 100644
--- a/arch/arm/plat-omap/include/plat/usb.h
+++ b/arch/arm/plat-omap/include/plat/usb.h
@@ -7,15 +7,12 @@
 #include <plat/board.h>
 
 #define OMAP3_HS_USB_PORTS	3
-enum ehci_hcd_omap_mode {
-	EHCI_HCD_OMAP_MODE_UNKNOWN,
-	EHCI_HCD_OMAP_MODE_PHY,
-	EHCI_HCD_OMAP_MODE_TLL,
-	EHCI_HCD_OMAP_MODE_HSIC,
-};
 
-enum ohci_omap3_port_mode {
-	OMAP_OHCI_PORT_MODE_UNUSED,
+enum usbhs_omap_port_mode {
+	OMAP_USBHS_PORT_MODE_UNUSED,
+	OMAP_EHCI_PORT_MODE_PHY,
+	OMAP_EHCI_PORT_MODE_TLL,
+	OMAP_EHCI_PORT_MODE_HSIC,
 	OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0,
 	OMAP_OHCI_PORT_MODE_PHY_6PIN_DPDM,
 	OMAP_OHCI_PORT_MODE_PHY_3PIN_DATSE0,
@@ -25,24 +22,45 @@ enum ohci_omap3_port_mode {
 	OMAP_OHCI_PORT_MODE_TLL_3PIN_DATSE0,
 	OMAP_OHCI_PORT_MODE_TLL_4PIN_DPDM,
 	OMAP_OHCI_PORT_MODE_TLL_2PIN_DATSE0,
-	OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM,
+	OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM
 };
 
-struct ehci_hcd_omap_platform_data {
-	enum ehci_hcd_omap_mode		port_mode[OMAP3_HS_USB_PORTS];
-	unsigned			phy_reset:1;
+struct usbhs_omap_board_data {
+	enum usbhs_omap_port_mode	port_mode[OMAP3_HS_USB_PORTS];
 
 	/* have to be valid if phy_reset is true and portx is in phy mode */
 	int	reset_gpio_port[OMAP3_HS_USB_PORTS];
+
+	/* Set this to true for ES2.x silicon */
+	unsigned			es2_compatibility:1;
+
+	unsigned			phy_reset:1;
+
+	/*
+	 * Regulators for USB PHYs.
+	 * Each PHY can have a separate regulator.
+	 */
+	struct regulator		*regulator[OMAP3_HS_USB_PORTS];
 };
 
-struct ohci_hcd_omap_platform_data {
-	enum ohci_omap3_port_mode	port_mode[OMAP3_HS_USB_PORTS];
+struct ehci_hcd_omap_platform_data {
+	enum usbhs_omap_port_mode	port_mode[OMAP3_HS_USB_PORTS];
+	int				reset_gpio_port[OMAP3_HS_USB_PORTS];
+	struct regulator		*regulator[OMAP3_HS_USB_PORTS];
+	unsigned			phy_reset:1;
+};
 
-	/* Set this to true for ES2.x silicon */
+struct ohci_hcd_omap_platform_data {
+	enum usbhs_omap_port_mode	port_mode[OMAP3_HS_USB_PORTS];
 	unsigned			es2_compatibility:1;
 };
 
+struct usbhs_omap_platform_data {
+	enum usbhs_omap_port_mode		port_mode[OMAP3_HS_USB_PORTS];
+
+	struct ehci_hcd_omap_platform_data	*ehci_data;
+	struct ohci_hcd_omap_platform_data	*ohci_data;
+};
 /*-------------------------------------------------------------------------*/
 
 #define OMAP1_OTG_BASE			0xfffb0400
@@ -80,19 +98,17 @@ enum musb_interface    {MUSB_INTERFACE_ULPI, MUSB_INTERFACE_UTMI};
 
 extern void usb_musb_init(struct omap_musb_board_data *board_data);
 
-extern void usb_ehci_init(const struct ehci_hcd_omap_platform_data *pdata);
+extern void usb_ehci_init(const struct usbhs_omap_board_data *pdata);
 
-extern void usb_ohci_init(const struct ohci_hcd_omap_platform_data *pdata);
+extern void usb_ohci_init(const struct usbhs_omap_board_data *pdata);
 
 extern int omap4430_phy_power(struct device *dev, int ID, int on);
 extern int omap4430_phy_set_clk(struct device *dev, int on);
 extern int omap4430_phy_init(struct device *dev);
 extern int omap4430_phy_exit(struct device *dev);
 extern int omap4430_phy_suspend(struct device *dev, int suspend);
-
 #endif
 
-
 /*
  * FIXME correct answer depends on hmc_mode,
  * as does (on omap1) any nonzero value for config->otg port number
diff --git a/drivers/usb/host/ehci-omap.c b/drivers/usb/host/ehci-omap.c
index 15277213f92..18df6c6a580 100644
--- a/drivers/usb/host/ehci-omap.c
+++ b/drivers/usb/host/ehci-omap.c
@@ -155,9 +155,9 @@
 #define is_omap_ehci_rev1(x)	(x->omap_ehci_rev == OMAP_EHCI_REV1)
 #define is_omap_ehci_rev2(x)	(x->omap_ehci_rev == OMAP_EHCI_REV2)
 
-#define is_ehci_phy_mode(x)	(x == EHCI_HCD_OMAP_MODE_PHY)
-#define is_ehci_tll_mode(x)	(x == EHCI_HCD_OMAP_MODE_TLL)
-#define is_ehci_hsic_mode(x)	(x == EHCI_HCD_OMAP_MODE_HSIC)
+#define is_ehci_phy_mode(x)	(x == OMAP_EHCI_PORT_MODE_PHY)
+#define is_ehci_tll_mode(x)	(x == OMAP_EHCI_PORT_MODE_TLL)
+#define is_ehci_hsic_mode(x)	(x == OMAP_EHCI_PORT_MODE_HSIC)
 
 /*-------------------------------------------------------------------------*/
 
@@ -220,7 +220,7 @@ struct ehci_hcd_omap {
 	u32			omap_ehci_rev;
 
 	/* desired phy_mode: TLL, PHY */
-	enum ehci_hcd_omap_mode	port_mode[OMAP3_HS_USB_PORTS];
+	enum usbhs_omap_port_mode	port_mode[OMAP3_HS_USB_PORTS];
 
 	void __iomem		*uhh_base;
 	void __iomem		*tll_base;
@@ -389,7 +389,7 @@ static int omap_start_ehc(struct ehci_hcd_omap *omap, struct usb_hcd *hcd)
 	 */
 	if (is_omap_ehci_rev2(omap)) {
 		switch (omap->port_mode[0]) {
-		case EHCI_HCD_OMAP_MODE_PHY:
+		case OMAP_EHCI_PORT_MODE_PHY:
 			omap->xclk60mhsp1_ck = clk_get(omap->dev,
 							"xclk60mhsp1_ck");
 			if (IS_ERR(omap->xclk60mhsp1_ck)) {
@@ -413,7 +413,7 @@ static int omap_start_ehc(struct ehci_hcd_omap *omap, struct usb_hcd *hcd)
 					"Unable to set P1 f-clock\n");
 			}
 			break;
-		case EHCI_HCD_OMAP_MODE_TLL:
+		case OMAP_EHCI_PORT_MODE_TLL:
 			omap->xclk60mhsp1_ck = clk_get(omap->dev,
 							"init_60m_fclk");
 			if (IS_ERR(omap->xclk60mhsp1_ck)) {
@@ -463,7 +463,7 @@ static int omap_start_ehc(struct ehci_hcd_omap *omap, struct usb_hcd *hcd)
 			break;
 		}
 		switch (omap->port_mode[1]) {
-		case EHCI_HCD_OMAP_MODE_PHY:
+		case OMAP_EHCI_PORT_MODE_PHY:
 			omap->xclk60mhsp2_ck = clk_get(omap->dev,
 							"xclk60mhsp2_ck");
 			if (IS_ERR(omap->xclk60mhsp2_ck)) {
@@ -487,7 +487,7 @@ static int omap_start_ehc(struct ehci_hcd_omap *omap, struct usb_hcd *hcd)
 					"Unable to set P2 f-clock\n");
 			}
 			break;
-		case EHCI_HCD_OMAP_MODE_TLL:
+		case OMAP_EHCI_PORT_MODE_TLL:
 			omap->xclk60mhsp2_ck = clk_get(omap->dev,
 							"init_60m_fclk");
 			if (IS_ERR(omap->xclk60mhsp2_ck)) {
@@ -591,11 +591,11 @@ static int omap_start_ehc(struct ehci_hcd_omap *omap, struct usb_hcd *hcd)
 	reg &= ~OMAP_UHH_HOSTCONFIG_INCRX_ALIGN_EN;
 
 	if (is_omap_ehci_rev1(omap)) {
-		if (omap->port_mode[0] == EHCI_HCD_OMAP_MODE_UNKNOWN)
+		if (omap->port_mode[0] == OMAP_USBHS_PORT_MODE_UNUSED)
 			reg &= ~OMAP_UHH_HOSTCONFIG_P1_CONNECT_STATUS;
-		if (omap->port_mode[1] == EHCI_HCD_OMAP_MODE_UNKNOWN)
+		if (omap->port_mode[1] == OMAP_USBHS_PORT_MODE_UNUSED)
 			reg &= ~OMAP_UHH_HOSTCONFIG_P2_CONNECT_STATUS;
-		if (omap->port_mode[2] == EHCI_HCD_OMAP_MODE_UNKNOWN)
+		if (omap->port_mode[2] == OMAP_USBHS_PORT_MODE_UNUSED)
 			reg &= ~OMAP_UHH_HOSTCONFIG_P3_CONNECT_STATUS;
 
 		/* Bypass the TLL module for PHY mode operation */
@@ -656,15 +656,15 @@ static int omap_start_ehc(struct ehci_hcd_omap *omap, struct usb_hcd *hcd)
 	ehci_omap_writel(omap->ehci_base, EHCI_INSNREG04,
 				EHCI_INSNREG04_DISABLE_UNSUSPEND);
 
-	if ((omap->port_mode[0] == EHCI_HCD_OMAP_MODE_TLL) ||
-		(omap->port_mode[1] == EHCI_HCD_OMAP_MODE_TLL) ||
-			(omap->port_mode[2] == EHCI_HCD_OMAP_MODE_TLL)) {
+	if ((omap->port_mode[0] == OMAP_EHCI_PORT_MODE_TLL) ||
+		(omap->port_mode[1] == OMAP_EHCI_PORT_MODE_TLL) ||
+			(omap->port_mode[2] == OMAP_EHCI_PORT_MODE_TLL)) {
 
-		if (omap->port_mode[0] == EHCI_HCD_OMAP_MODE_TLL)
+		if (omap->port_mode[0] == OMAP_EHCI_PORT_MODE_TLL)
 			tll_ch_mask |= OMAP_TLL_CHANNEL_1_EN_MASK;
-		if (omap->port_mode[1] == EHCI_HCD_OMAP_MODE_TLL)
+		if (omap->port_mode[1] == OMAP_EHCI_PORT_MODE_TLL)
 			tll_ch_mask |= OMAP_TLL_CHANNEL_2_EN_MASK;
-		if (omap->port_mode[2] == EHCI_HCD_OMAP_MODE_TLL)
+		if (omap->port_mode[2] == OMAP_EHCI_PORT_MODE_TLL)
 			tll_ch_mask |= OMAP_TLL_CHANNEL_3_EN_MASK;
 
 		/* Enable UTMI mode for required TLL channels */
@@ -686,9 +686,9 @@ static int omap_start_ehc(struct ehci_hcd_omap *omap, struct usb_hcd *hcd)
 	}
 
 	/* Soft reset the PHY using PHY reset command over ULPI */
-	if (omap->port_mode[0] == EHCI_HCD_OMAP_MODE_PHY)
+	if (omap->port_mode[0] == OMAP_EHCI_PORT_MODE_PHY)
 		omap_ehci_soft_phy_reset(omap, 0);
-	if (omap->port_mode[1] == EHCI_HCD_OMAP_MODE_PHY)
+	if (omap->port_mode[1] == OMAP_EHCI_PORT_MODE_PHY)
 		omap_ehci_soft_phy_reset(omap, 1);
 
 	return 0;
@@ -903,7 +903,7 @@ static const struct hc_driver ehci_omap_hc_driver;
  */
 static int ehci_hcd_omap_probe(struct platform_device *pdev)
 {
-	struct ehci_hcd_omap_platform_data *pdata = pdev->dev.platform_data;
+	struct usbhs_omap_board_data *pdata = pdev->dev.platform_data;
 	struct ehci_hcd_omap *omap;
 	struct resource *res;
 	struct usb_hcd *hcd;
@@ -981,7 +981,7 @@ static int ehci_hcd_omap_probe(struct platform_device *pdev)
 
 	/* get ehci regulator and enable */
 	for (i = 0 ; i < OMAP3_HS_USB_PORTS ; i++) {
-		if (omap->port_mode[i] != EHCI_HCD_OMAP_MODE_PHY) {
+		if (omap->port_mode[i] != OMAP_EHCI_PORT_MODE_PHY) {
 			omap->regulator[i] = NULL;
 			continue;
 		}
diff --git a/drivers/usb/host/ohci-omap3.c b/drivers/usb/host/ohci-omap3.c
index 32f56bbec21..3f9db87fe52 100644
--- a/drivers/usb/host/ohci-omap3.c
+++ b/drivers/usb/host/ohci-omap3.c
@@ -141,7 +141,7 @@ struct ohci_hcd_omap3 {
 	struct clk		*usbtll_ick;
 
 	/* port_mode: TLL/PHY, 2/3/4/6-PIN, DP-DM/DAT-SE0 */
-	enum ohci_omap3_port_mode	port_mode[OMAP3_HS_USB_PORTS];
+	enum usbhs_omap_port_mode	port_mode[OMAP3_HS_USB_PORTS];
 	void __iomem		*uhh_base;
 	void __iomem		*tll_base;
 	void __iomem		*ohci_base;
@@ -206,10 +206,10 @@ static int ohci_omap3_start(struct usb_hcd *hcd)
  * convert the port-mode enum to a value we can use in the FSLSMODE
  * field of USBTLL_CHANNEL_CONF
  */
-static unsigned ohci_omap3_fslsmode(enum ohci_omap3_port_mode mode)
+static unsigned ohci_omap3_fslsmode(enum usbhs_omap_port_mode mode)
 {
 	switch (mode) {
-	case OMAP_OHCI_PORT_MODE_UNUSED:
+	case OMAP_USBHS_PORT_MODE_UNUSED:
 	case OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0:
 		return 0x0;
 
@@ -266,7 +266,7 @@ static void ohci_omap3_tll_config(struct ohci_hcd_omap3 *omap)
 	for (i = 0; i < OMAP_TLL_CHANNEL_COUNT; i++) {
 
 		/* Enable only those channels that are actually used */
-		if (omap->port_mode[i] == OMAP_OHCI_PORT_MODE_UNUSED)
+		if (omap->port_mode[i] == OMAP_USBHS_PORT_MODE_UNUSED)
 			continue;
 
 		reg = ohci_omap_readl(omap->tll_base, OMAP_TLL_CHANNEL_CONF(i));
@@ -382,11 +382,11 @@ static int omap3_start_ohci(struct ohci_hcd_omap3 *omap, struct usb_hcd *hcd)
 	 *
 	 * For now, turn off all the Pi_CONNECT_STATUS bits
 	 *
-	if (omap->port_mode[0] == OMAP_OHCI_PORT_MODE_UNUSED)
+	if (omap->port_mode[0] == OMAP_USBHS_PORT_MODE_UNUSED)
 		reg &= ~OMAP_UHH_HOSTCONFIG_P1_CONNECT_STATUS;
-	if (omap->port_mode[1] == OMAP_OHCI_PORT_MODE_UNUSED)
+	if (omap->port_mode[1] == OMAP_USBHS_PORT_MODE_UNUSED)
 		reg &= ~OMAP_UHH_HOSTCONFIG_P2_CONNECT_STATUS;
-	if (omap->port_mode[2] == OMAP_OHCI_PORT_MODE_UNUSED)
+	if (omap->port_mode[2] == OMAP_USBHS_PORT_MODE_UNUSED)
 		reg &= ~OMAP_UHH_HOSTCONFIG_P3_CONNECT_STATUS;
 	 */
 	reg &= ~OMAP_UHH_HOSTCONFIG_P1_CONNECT_STATUS;
@@ -403,17 +403,17 @@ static int omap3_start_ohci(struct ohci_hcd_omap3 *omap, struct usb_hcd *hcd)
 		reg |= OMAP_UHH_HOSTCONFIG_ULPI_BYPASS;
 	} else {
 		dev_dbg(omap->dev, "OMAP3 ES version > ES2.1\n");
-		if (omap->port_mode[0] == OMAP_OHCI_PORT_MODE_UNUSED)
+		if (omap->port_mode[0] == OMAP_USBHS_PORT_MODE_UNUSED)
 			reg &= ~OMAP_UHH_HOSTCONFIG_ULPI_P1_BYPASS;
 		else
 			reg |= OMAP_UHH_HOSTCONFIG_ULPI_P1_BYPASS;
 
-		if (omap->port_mode[1] == OMAP_OHCI_PORT_MODE_UNUSED)
+		if (omap->port_mode[1] == OMAP_USBHS_PORT_MODE_UNUSED)
 			reg &= ~OMAP_UHH_HOSTCONFIG_ULPI_P2_BYPASS;
 		else
 			reg |= OMAP_UHH_HOSTCONFIG_ULPI_P2_BYPASS;
 
-		if (omap->port_mode[2] == OMAP_OHCI_PORT_MODE_UNUSED)
+		if (omap->port_mode[2] == OMAP_USBHS_PORT_MODE_UNUSED)
 			reg &= ~OMAP_UHH_HOSTCONFIG_ULPI_P3_BYPASS;
 		else
 			reg |= OMAP_UHH_HOSTCONFIG_ULPI_P3_BYPASS;
@@ -580,7 +580,7 @@ static const struct hc_driver ohci_omap3_hc_driver = {
  */
 static int __devinit ohci_hcd_omap3_probe(struct platform_device *pdev)
 {
-	struct ohci_hcd_omap_platform_data *pdata = pdev->dev.platform_data;
+	struct usbhs_omap_board_data *pdata = pdev->dev.platform_data;
 	struct ohci_hcd_omap3 *omap;
 	struct resource *res;
 	struct usb_hcd *hcd;