qlcnic: remove unused definitions from header file

Signed-off-by: Shahed Shaikh <shahed.shaikh@qlogic.com>
Signed-off-by: Sony Chacko <sony.chacko@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

3 files changed, 4 insertions, 134 deletions

diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h b/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h
index b637f1e3e43..471982c1835 100644
--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h
@@ -569,43 +569,6 @@ struct qlcnic_recv_context {
  * the crb QLCNIC_CDRP_CRB_OFFSET.
  */
 #define QLCNIC_CDRP_FORM_CMD(cmd)	(QLCNIC_CDRP_CMD_BIT | (cmd))
-#define QLCNIC_CDRP_IS_CMD(cmd)	(((cmd) & QLCNIC_CDRP_CMD_BIT) != 0)
-
-#define QLCNIC_CDRP_CMD_SUBMIT_CAPABILITIES     0x00000001
-#define QLCNIC_CDRP_CMD_READ_MAX_RDS_PER_CTX    0x00000002
-#define QLCNIC_CDRP_CMD_READ_MAX_SDS_PER_CTX    0x00000003
-#define QLCNIC_CDRP_CMD_READ_MAX_RULES_PER_CTX  0x00000004
-#define QLCNIC_CDRP_CMD_READ_MAX_RX_CTX         0x00000005
-#define QLCNIC_CDRP_CMD_READ_MAX_TX_CTX         0x00000006
-#define QLCNIC_CDRP_CMD_CREATE_RX_CTX           0x00000007
-#define QLCNIC_CDRP_CMD_DESTROY_RX_CTX          0x00000008
-#define QLCNIC_CDRP_CMD_CREATE_TX_CTX           0x00000009
-#define QLCNIC_CDRP_CMD_DESTROY_TX_CTX          0x0000000a
-#define QLCNIC_CDRP_CMD_INTRPT_TEST		0x00000011
-#define QLCNIC_CDRP_CMD_SET_MTU                 0x00000012
-#define QLCNIC_CDRP_CMD_READ_PHY		0x00000013
-#define QLCNIC_CDRP_CMD_WRITE_PHY		0x00000014
-#define QLCNIC_CDRP_CMD_READ_HW_REG		0x00000015
-#define QLCNIC_CDRP_CMD_GET_FLOW_CTL		0x00000016
-#define QLCNIC_CDRP_CMD_SET_FLOW_CTL		0x00000017
-#define QLCNIC_CDRP_CMD_READ_MAX_MTU		0x00000018
-#define QLCNIC_CDRP_CMD_READ_MAX_LRO		0x00000019
-#define QLCNIC_CDRP_CMD_MAC_ADDRESS		0x0000001f
-
-#define QLCNIC_CDRP_CMD_GET_PCI_INFO		0x00000020
-#define QLCNIC_CDRP_CMD_GET_NIC_INFO		0x00000021
-#define QLCNIC_CDRP_CMD_SET_NIC_INFO		0x00000022
-#define QLCNIC_CDRP_CMD_GET_ESWITCH_CAPABILITY	0x00000024
-#define QLCNIC_CDRP_CMD_TOGGLE_ESWITCH		0x00000025
-#define QLCNIC_CDRP_CMD_GET_ESWITCH_STATUS	0x00000026
-#define QLCNIC_CDRP_CMD_SET_PORTMIRRORING	0x00000027
-#define QLCNIC_CDRP_CMD_CONFIGURE_ESWITCH	0x00000028
-#define QLCNIC_CDRP_CMD_GET_ESWITCH_PORT_CONFIG	0x00000029
-#define QLCNIC_CDRP_CMD_GET_ESWITCH_STATS	0x0000002a
-#define QLCNIC_CDRP_CMD_CONFIG_PORT		0x0000002E
-#define QLCNIC_CDRP_CMD_TEMP_SIZE		0x0000002f
-#define QLCNIC_CDRP_CMD_GET_TEMP_HDR		0x00000030
-#define QLCNIC_CDRP_CMD_GET_MAC_STATS		0x00000037
 
 #define QLCNIC_RCODE_SUCCESS		0
 #define QLCNIC_RCODE_INVALID_ARGS	6
@@ -1086,7 +1049,6 @@ struct qlcnic_info {
 	u16	switch_mode;
 	u32	capabilities;
 	u8	max_mac_filters;
-	u8	reserved1;
 	u16	max_mtu;
 	u16	max_tx_ques;
 	u16	max_rx_ques;
diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c
index d8008c0cc88..f65fd7b6f9a 100644
--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c
@@ -174,11 +174,9 @@ static int qlcnic_dev_statistics_len(struct qlcnic_adapter *adapter)
 #define QLCNIC_MAX_EEPROM_LEN   1024
 
 static const u32 diag_registers[] = {
-	CRB_CMDPEG_STATE,
-	CRB_RCVPEG_STATE,
-	CRB_XG_STATE_P3P,
-	CRB_FW_CAPABILITIES_1,
-	ISR_INT_STATE_REG,
+	QLCNIC_CMDPEG_STATE,
+	QLCNIC_RCVPEG_STATE,
+	QLCNIC_FW_CAPABILITIES,
 	QLCNIC_CRB_DRV_ACTIVE,
 	QLCNIC_CRB_DEV_STATE,
 	QLCNIC_CRB_DRV_STATE,
@@ -191,6 +189,7 @@ static const u32 diag_registers[] = {
 	-1
 };
 
+
 static const u32 ext_diag_registers[] = {
 	CRB_XG_STATE_P3P,
 	ISR_INT_STATE_REG,
diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_hdr.h b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_hdr.h
index 458b9aea2bb..74f77112298 100644
--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_hdr.h
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_hdr.h
@@ -389,9 +389,6 @@ enum {
 #define QLCNIC_ROMUSB_ROM_DUMMY_BYTE_CNT (ROMUSB_ROM + 0x0014)
 #define QLCNIC_ROMUSB_ROM_RDATA		(ROMUSB_ROM + 0x0018)
 
-/* Lock IDs for ROM lock */
-#define ROM_LOCK_DRIVER	0x0d417340
-
 /******************************************************************************
 *
 *    Definitions specific to M25P flash
@@ -451,13 +448,10 @@ enum {
 #define ISR_INT_TARGET_STATUS_F7   (QLCNIC_PCIX_PS_REG(PCIX_TARGET_STATUS_F7))
 #define ISR_INT_TARGET_MASK_F7     (QLCNIC_PCIX_PS_REG(PCIX_TARGET_MASK_F7))
 
-#define QLCNIC_PCI_MN_2M	(0)
-#define QLCNIC_PCI_MS_2M	(0x80000)
 #define QLCNIC_PCI_OCM0_2M	(0x000c0000UL)
 #define QLCNIC_PCI_CRBSPACE	(0x06000000UL)
 #define QLCNIC_PCI_CAMQM	(0x04800000UL)
 #define QLCNIC_PCI_CAMQM_END	(0x04800800UL)
-#define QLCNIC_PCI_2MB_SIZE	(0x00200000UL)
 #define QLCNIC_PCI_CAMQM_2M_BASE	(0x000ff800UL)
 
 #define QLCNIC_CRB_CAM	QLCNIC_PCI_CRB_WINDOW(QLCNIC_HW_PX_MAP_CRB_CAM)
@@ -501,44 +495,6 @@ enum {
 #define TA_CTL_WRITE	BIT_2
 #define TA_CTL_BUSY	BIT_3
 
-/*
- *   Register offsets for MN
- */
-#define MIU_TEST_AGT_BASE		(0x90)
-
-#define MIU_TEST_AGT_ADDR_LO		(0x04)
-#define MIU_TEST_AGT_ADDR_HI		(0x08)
-#define MIU_TEST_AGT_WRDATA_LO		(0x10)
-#define MIU_TEST_AGT_WRDATA_HI		(0x14)
-#define MIU_TEST_AGT_WRDATA_UPPER_LO	(0x20)
-#define MIU_TEST_AGT_WRDATA_UPPER_HI	(0x24)
-#define MIU_TEST_AGT_WRDATA(i)		(0x10+(0x10*((i)>>1))+(4*((i)&1)))
-#define MIU_TEST_AGT_RDDATA_LO		(0x18)
-#define MIU_TEST_AGT_RDDATA_HI		(0x1c)
-#define MIU_TEST_AGT_RDDATA_UPPER_LO	(0x28)
-#define MIU_TEST_AGT_RDDATA_UPPER_HI	(0x2c)
-#define MIU_TEST_AGT_RDDATA(i)		(0x18+(0x10*((i)>>1))+(4*((i)&1)))
-
-#define MIU_TEST_AGT_ADDR_MASK		0xfffffff8
-#define MIU_TEST_AGT_UPPER_ADDR(off)	(0)
-
-/*
- *   Register offsets for MS
- */
-#define SIU_TEST_AGT_BASE		(0x60)
-
-#define SIU_TEST_AGT_ADDR_LO		(0x04)
-#define SIU_TEST_AGT_ADDR_HI		(0x18)
-#define SIU_TEST_AGT_WRDATA_LO		(0x08)
-#define SIU_TEST_AGT_WRDATA_HI		(0x0c)
-#define SIU_TEST_AGT_WRDATA(i)		(0x08+(4*(i)))
-#define SIU_TEST_AGT_RDDATA_LO		(0x10)
-#define SIU_TEST_AGT_RDDATA_HI		(0x14)
-#define SIU_TEST_AGT_RDDATA(i)		(0x10+(4*(i)))
-
-#define SIU_TEST_AGT_ADDR_MASK		0x3ffff8
-#define SIU_TEST_AGT_UPPER_ADDR(off)	((off)>>22)
-
 /* XG Link status */
 #define XG_LINK_UP	0x10
 #define XG_LINK_DOWN	0x20
@@ -558,9 +514,6 @@ enum {
 
 #define QLCNIC_CAM_RAM_BASE	(QLCNIC_CRB_CAM + 0x02000)
 #define QLCNIC_CAM_RAM(reg)	(QLCNIC_CAM_RAM_BASE + (reg))
-#define QLCNIC_FW_VERSION_MAJOR (QLCNIC_CAM_RAM(0x150))
-#define QLCNIC_FW_VERSION_MINOR (QLCNIC_CAM_RAM(0x154))
-#define QLCNIC_FW_VERSION_SUB	(QLCNIC_CAM_RAM(0x158))
 #define QLCNIC_ROM_LOCK_ID	(QLCNIC_CAM_RAM(0x100))
 #define QLCNIC_PHY_LOCK_ID	(QLCNIC_CAM_RAM(0x120))
 #define QLCNIC_CRB_WIN_LOCK_ID	(QLCNIC_CAM_RAM(0x124))
@@ -574,27 +527,13 @@ enum {
 #define QLCNIC_CDRP_ARG(i)	(QLCNIC_REG(0x18 + ((i) * 4)))
 
 #define QLCNIC_CDRP_CRB_OFFSET		(QLCNIC_REG(0x18))
-#define QLCNIC_ARG1_CRB_OFFSET		(QLCNIC_REG(0x1c))
-#define QLCNIC_ARG2_CRB_OFFSET		(QLCNIC_REG(0x20))
-#define QLCNIC_ARG3_CRB_OFFSET		(QLCNIC_REG(0x24))
 #define QLCNIC_SIGN_CRB_OFFSET		(QLCNIC_REG(0x28))
 
-#define CRB_CMDPEG_STATE		(QLCNIC_REG(0x50))
-#define CRB_RCVPEG_STATE		(QLCNIC_REG(0x13c))
-
 #define CRB_XG_STATE_P3P		(QLCNIC_REG(0x98))
 #define CRB_PF_LINK_SPEED_1		(QLCNIC_REG(0xe8))
-#define CRB_PF_LINK_SPEED_2		(QLCNIC_REG(0xec))
-
-#define CRB_TEMP_STATE			(QLCNIC_REG(0x1b4))
-
-#define CRB_V2P_0			(QLCNIC_REG(0x290))
-#define CRB_V2P(port)			(CRB_V2P_0+((port)*4))
 #define CRB_DRIVER_VERSION		(QLCNIC_REG(0x2a0))
 
-#define CRB_FW_CAPABILITIES_1		(QLCNIC_CAM_RAM(0x128))
 #define CRB_FW_CAPABILITIES_2		(QLCNIC_CAM_RAM(0x12c))
-#define CRB_MAC_BLOCK_START		(QLCNIC_CAM_RAM(0x1c0))
 
 /*
  * CrbPortPhanCntrHi/Lo is used to pass the address of HostPhantomIndex address
@@ -621,11 +560,6 @@ enum {
 /* Lock IDs for PHY lock */
 #define PHY_LOCK_DRIVER		0x44524956
 
-/* Used for PS PCI Memory access */
-#define PCIX_PS_OP_ADDR_LO	(0x10000)
-/*   via CRB  (PS side only)     */
-#define PCIX_PS_OP_ADDR_HI	(0x10004)
-
 #define PCIX_INT_VECTOR 	(0x10100)
 #define PCIX_INT_MASK		(0x10104)
 
@@ -687,17 +621,6 @@ enum {
 #define QLCNIC_PEG_TUNE_CAPABILITY	(QLCNIC_CAM_RAM(0x02c))
 
 #define QLCNIC_DMA_WATCHDOG_CTRL	(QLCNIC_CAM_RAM(0x14))
-#define QLCNIC_PEG_ALIVE_COUNTER	(QLCNIC_CAM_RAM(0xb0))
-#define QLCNIC_PEG_HALT_STATUS1 	(QLCNIC_CAM_RAM(0xa8))
-#define QLCNIC_PEG_HALT_STATUS2 	(QLCNIC_CAM_RAM(0xac))
-#define QLCNIC_CRB_DRV_ACTIVE	(QLCNIC_CAM_RAM(0x138))
-#define QLCNIC_CRB_DEV_STATE		(QLCNIC_CAM_RAM(0x140))
-
-#define QLCNIC_CRB_DRV_STATE		(QLCNIC_CAM_RAM(0x144))
-#define QLCNIC_CRB_DRV_SCRATCH		(QLCNIC_CAM_RAM(0x148))
-#define QLCNIC_CRB_DEV_PARTITION_INFO	(QLCNIC_CAM_RAM(0x14c))
-#define QLCNIC_CRB_DRV_IDC_VER		(QLCNIC_CAM_RAM(0x174))
-#define QLCNIC_CRB_DEV_NPAR_STATE	(QLCNIC_CAM_RAM(0x19c))
 #define QLCNIC_ROM_DEV_INIT_TIMEOUT	(0x3e885c)
 #define QLCNIC_ROM_DRV_RESET_TIMEOUT	(0x3e8860)
 
@@ -716,7 +639,6 @@ enum {
 #define QLCNIC_DEV_NPAR_OPER		1 /* NPAR Operational */
 #define QLCNIC_DEV_NPAR_OPER_TIMEO	30 /* Operational time out */
 
-#define QLC_DEV_CHECK_ACTIVE(VAL, FN)		((VAL) & (1 << (FN * 4)))
 #define QLC_DEV_SET_REF_CNT(VAL, FN)		((VAL) |= (1 << (FN * 4)))
 #define QLC_DEV_CLR_REF_CNT(VAL, FN)		((VAL) &= ~(1 << (FN * 4)))
 #define QLC_DEV_SET_RST_RDY(VAL, FN)		((VAL) |= (1 << (FN * 4)))
@@ -774,26 +696,13 @@ struct qlcnic_legacy_intr_set {
 	u32	pci_int_reg;
 };
 
-#define QLCNIC_FW_API		0x1b216c
-#define QLCNIC_DRV_OP_MODE	0x1b2170
 #define QLCNIC_MSIX_BASE	0x132110
 #define QLCNIC_MAX_PCI_FUNC	8
 #define QLCNIC_MAX_VLAN_FILTERS	64
 
-/* FW dump defines */
-#define MIU_TEST_CTR		0x41000090
-#define MIU_TEST_ADDR_LO	0x41000094
-#define MIU_TEST_ADDR_HI	0x41000098
 #define FLASH_ROM_WINDOW	0x42110030
 #define FLASH_ROM_DATA		0x42150000
 
-
-static const u32 FW_DUMP_LEVELS[] = {
-	0x3, 0x7, 0xf, 0x1f, 0x3f, 0x7f, 0xff };
-
-static const u32 MIU_TEST_READ_DATA[] = {
-	0x410000A8, 0x410000AC, 0x410000B8, 0x410000BC, };
-
 #define QLCNIC_FW_DUMP_REG1	0x00130060
 #define QLCNIC_FW_DUMP_REG2	0x001e0000
 #define QLCNIC_FLASH_SEM2_LK	0x0013C010