diff options
| author | Brian Lilly <brian@crystalfontz.com> | 2013-06-13 15:43:43 +0200 |
|---|---|---|
| committer | Shawn Guo <shawn.guo@linaro.org> | 2013-06-17 15:43:30 +0800 |
| commit | 65bc642f1b76442e8242a79fa0e48d49fda98ba8 (patch) | |
| tree | ec3064d6f3199bdf18bb91e59b47cb46025b1906 | |
| parent | 17a2163881aa7df9ae83d75cc0671a1013399185 (diff) | |
ARM: cfa10049: Switch the chip select pin of the LCD controller
The early prototypes had the chip select pin for the LCD controller
wired on the GPIO 3-23, while the production run of the CFA-10049 have
this chip select on the GPIO 3-5.
Signed-off-by: Brian Lilly <brian@crystalfontz.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
| -rw-r--r-- | arch/arm/boot/dts/imx28-cfa10049.dts | 4 |
1 files changed, 2 insertions, 2 deletions
diff --git a/arch/arm/boot/dts/imx28-cfa10049.dts b/arch/arm/boot/dts/imx28-cfa10049.dts index dfdcd85c265..04b2f769ffb 100644 --- a/arch/arm/boot/dts/imx28-cfa10049.dts +++ b/arch/arm/boot/dts/imx28-cfa10049.dts @@ -33,7 +33,7 @@ 0x1163 /* MX28_PAD_LCD_D22__GPIO_1_22 */ 0x1173 /* MX28_PAD_LCD_D22__GPIO_1_23 */ 0x2153 /* MX28_PAD_SSP2_D5__GPIO_2_21 */ - 0x3173 /* MX28_PAD_LCD_RESET__GPIO_3_23 */ + 0x3053 /* MX28_PAD_AUART1_TX__GPIO_3_5 */ >; fsl,drive-strength = <0>; fsl,voltage = <1>; @@ -265,7 +265,7 @@ gpio-sck = <&gpio2 16 0>; gpio-mosi = <&gpio2 17 0>; gpio-miso = <&gpio2 18 0>; - cs-gpios = <&gpio3 23 0>; + cs-gpios = <&gpio3 5 0>; num-chipselects = <1>; #address-cells = <1>; #size-cells = <0>; |