Philips PNX8550 support: MIPS32-like core with 2 Trimedias on it.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

38 files changed, 2876 insertions, 3 deletions

diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 4ef015f580f..f6b25ae1861 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -489,6 +489,16 @@ config HYPERTRANSPORT
 	bool "Hypertransport Support for PMC-Sierra Yosemite"
 	depends on PMC_YOSEMITE
 
+config PNX8550_V2PCI
+	bool "Support for Philips PNX8550 based Viper2-PCI board"
+	select PNX8550
+	select SYS_SUPPORTS_LITTLE_ENDIAN
+
+config PNX8550_JBS
+	bool "Support for Philips PNX8550 based JBS board"
+	select PNX8550
+	select SYS_SUPPORTS_LITTLE_ENDIAN
+
 config DDB5074
 	bool "Support for NEC DDB Vrc-5074 (EXPERIMENTAL)"
 	depends on EXPERIMENTAL
@@ -827,6 +837,7 @@ config TOSHIBA_FPCIB0
 
 source "arch/mips/sgi-ip27/Kconfig"
 source "arch/mips/sibyte/Kconfig"
+source "arch/mips/philips/pnx8550/common/Kconfig"
 
 config RWSEM_GENERIC_SPINLOCK
 	bool
@@ -954,6 +965,16 @@ config ITE_BOARD_GEN
 	depends on MIPS_IVR || MIPS_ITE8172
 	default y
 
+config PNX8550
+	bool
+	select SOC_PNX8550
+
+config SOC_PNX8550
+	bool
+	select SYS_SUPPORTS_32BIT_KERNEL
+	select DMA_NONCOHERENT
+	select HW_HAS_PCI
+
 config SWAP_IO_SPACE
 	bool
 
diff --git a/arch/mips/Makefile b/arch/mips/Makefile
index 6780d115a7d..d62787ab9ff 100644
--- a/arch/mips/Makefile
+++ b/arch/mips/Makefile
@@ -228,6 +228,7 @@ cflags-$(CONFIG_CPU_RM9000)	+= \
 			$(call set_gccflags,rm9000,mips4,r5000,mips4,mips2) \
 			-Wa,--trap
 
+
 cflags-$(CONFIG_CPU_SB1)	+= \
 			$(call set_gccflags,sb1,mips64,r5000,mips4,mips2) \
 			-Wa,--trap
@@ -561,6 +562,19 @@ load-$(CONFIG_CASIO_E55)	+= 0xffffffff80004000
 load-$(CONFIG_TANBAC_TB022X)	+= 0xffffffff80000000
 
 #
+# Common Philips PNX8550
+#
+core-$(CONFIG_SOC_PNX8550)	+= arch/mips/philips/pnx8550/common/
+cflags-$(CONFIG_SOC_PNX8550)	+= -Iinclude/asm-mips/mach-pnx8550
+
+#
+# Philips PNX8550 JBS board
+#
+libs-$(CONFIG_PNX8550_JBS)	+= arch/mips/philips/pnx8550/jbs/
+#cflags-$(CONFIG_PNX8550_JBS)	+= -Iinclude/asm-mips/mach-pnx8550
+load-$(CONFIG_PNX8550_JBS)	+= 0xffffffff80060000
+
+#
 # SGI IP22 (Indy/Indigo2)
 #
 # Set the load address to >= 0xffffffff88069000 if you want to leave space for
diff --git a/arch/mips/kernel/cpu-probe.c b/arch/mips/kernel/cpu-probe.c
index 844126b39ed..70c8ad9bc8f 100644
--- a/arch/mips/kernel/cpu-probe.c
+++ b/arch/mips/kernel/cpu-probe.c
@@ -121,6 +121,7 @@ static inline void check_wait(void)
 	case CPU_24K:
 	case CPU_25KF:
 	case CPU_34K:
+ 	case CPU_PR4450:
 		cpu_wait = r4k_wait;
 		printk(" available.\n");
 		break;
@@ -624,6 +625,21 @@ static inline void cpu_probe_sandcraft(struct cpuinfo_mips *c)
 	}
 }
 
+static inline void cpu_probe_philips(struct cpuinfo_mips *c)
+{
+	decode_configs(c);
+	switch (c->processor_id & 0xff00) {
+	case PRID_IMP_PR4450:
+		c->cputype = CPU_PR4450;
+		c->isa_level = MIPS_CPU_ISA_M32;
+		break;
+	default:
+		panic("Unknown Philips Core!"); /* REVISIT: die? */
+		break;
+	}
+}
+
+
 __init void cpu_probe(void)
 {
 	struct cpuinfo_mips *c = &current_cpu_data;
@@ -649,6 +665,9 @@ __init void cpu_probe(void)
 	case PRID_COMP_SANDCRAFT:
 		cpu_probe_sandcraft(c);
 		break;
+ 	case PRID_COMP_PHILIPS:
+		cpu_probe_philips(c);
+ 		break;
 	default:
 		c->cputype = CPU_UNKNOWN;
 	}
diff --git a/arch/mips/kernel/proc.c b/arch/mips/kernel/proc.c
index 1bd40af508e..e46a92d01d5 100644
--- a/arch/mips/kernel/proc.c
+++ b/arch/mips/kernel/proc.c
@@ -80,7 +80,8 @@ static const char *cpu_name[] = {
 	[CPU_VR4133]	= "NEC VR4133",
 	[CPU_VR4181]	= "NEC VR4181",
 	[CPU_VR4181A]	= "NEC VR4181A",
-	[CPU_SR71000]	= "Sandcraft SR71000"
+	[CPU_SR71000]	= "Sandcraft SR71000",
+	[CPU_PR4450]	= "Philips PR4450",
 };
 
 
diff --git a/arch/mips/kernel/time.c b/arch/mips/kernel/time.c
index fbc153c8f83..a24651dfaab 100644
--- a/arch/mips/kernel/time.c
+++ b/arch/mips/kernel/time.c
@@ -11,6 +11,7 @@
  * Free Software Foundation;  either version 2 of the  License, or (at your
  * option) any later version.
  */
+#include <linux/config.h>
 #include <linux/types.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
@@ -112,8 +113,10 @@ static void c0_timer_ack(void)
 {
 	unsigned int count;
 
+#ifndef CONFIG_SOC_PNX8550	/* pnx8550 resets to zero */
 	/* Ack this timer interrupt and set the next one.  */
 	expirelo += cycles_per_jiffy;
+#endif
 	write_c0_compare(expirelo);
 
 	/* Check to see if we have missed any timer interrupts.  */
diff --git a/arch/mips/mm/tlbex.c b/arch/mips/mm/tlbex.c
index c1d394d36f6..a876ed6cde2 100644
--- a/arch/mips/mm/tlbex.c
+++ b/arch/mips/mm/tlbex.c
@@ -844,6 +844,7 @@ static __init void build_tlb_write_entry(u32 **p, struct label **l,
 	case CPU_AU1500:
 	case CPU_AU1550:
 	case CPU_AU1200:
+	case CPU_PR4450:
 		i_nop(p);
 		tlbw(p);
 		break;
diff --git a/arch/mips/pci/Makefile b/arch/mips/pci/Makefile
index 83d81c9cdc2..ea8438b81fe 100644
--- a/arch/mips/pci/Makefile
+++ b/arch/mips/pci/Makefile
@@ -34,6 +34,7 @@ obj-$(CONFIG_MIPS_ITE8172)	+= fixup-ite8172g.o
 obj-$(CONFIG_MIPS_IVR)		+= fixup-ivr.o
 obj-$(CONFIG_SOC_AU1500)	+= fixup-au1000.o ops-au1000.o
 obj-$(CONFIG_SOC_AU1550)	+= fixup-au1000.o ops-au1000.o
+obj-$(CONFIG_SOC_PNX8550)	+= fixup-pnx8550.o ops-pnx8550.o
 obj-$(CONFIG_MIPS_MALTA)	+= fixup-malta.o
 obj-$(CONFIG_MOMENCO_JAGUAR_ATX)+= fixup-jaguar.o
 obj-$(CONFIG_MOMENCO_OCELOT)	+= fixup-ocelot.o pci-ocelot.o
diff --git a/arch/mips/pci/fixup-pnx8550.c b/arch/mips/pci/fixup-pnx8550.c
new file mode 100644
index 00000000000..4256b3b30b7
--- /dev/null
+++ b/arch/mips/pci/fixup-pnx8550.c
@@ -0,0 +1,57 @@
+/*
+ *  Philips PNX8550 pci fixups.
+ *
+ *  Copyright 2005 Embedded Alley Solutions, Inc
+ *  source@embeddealley.com
+ *
+ *  This program is free software; you can distribute it and/or modify it
+ *  under the terms of the GNU General Public License (Version 2) as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ *  for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ */
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+
+#include <asm/mach-pnx8550/pci.h>
+#include <asm/mach-pnx8550/int.h>
+
+
+#undef	DEBUG
+#ifdef 	DEBUG
+#define	DBG(x...)	printk(x)
+#else
+#define	DBG(x...)
+#endif
+
+extern char irq_tab_jbs[][5];
+
+void __init pcibios_fixup_resources(struct pci_dev *dev)
+{
+	/* no need to fixup IO resources */
+}
+
+void __init pcibios_fixup(void)
+{
+	/* nothing to do here */
+}
+
+int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+{
+	return irq_tab_jbs[slot][pin];
+}
+
+/* Do platform specific device initialization at pci_enable_device() time */
+int pcibios_plat_dev_init(struct pci_dev *dev)
+{
+	return 0;
+}
diff --git a/arch/mips/pci/ops-pnx8550.c b/arch/mips/pci/ops-pnx8550.c
new file mode 100644
index 00000000000..454b65cc335
--- /dev/null
+++ b/arch/mips/pci/ops-pnx8550.c
@@ -0,0 +1,284 @@
+/*
+ *
+ *  BRIEF MODULE DESCRIPTION
+ *
+ *  2.6 port, Embedded Alley Solutions, Inc
+ *
+ *  Based on:
+ *  Author: source@mvista.com
+ *
+ *  This program is free software; you can distribute it and/or modify it
+ *  under the terms of the GNU General Public License (Version 2) as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ *  for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ */
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/vmalloc.h>
+#include <linux/delay.h>
+
+#include <asm/mach-pnx8550/pci.h>
+#include <asm/mach-pnx8550/glb.h>
+#include <asm/debug.h>
+
+
+static inline void clear_status(void)
+{
+	unsigned long pci_stat;
+
+	pci_stat = inl(PCI_BASE | PCI_GPPM_STATUS);
+	outl(pci_stat, PCI_BASE | PCI_GPPM_ICLR);
+}
+
+static inline unsigned int
+calc_cfg_addr(struct pci_bus *bus, unsigned int devfn, int where)
+{
+	unsigned int addr;
+
+	addr = ((bus->number > 0) ? (((bus->number & 0xff) << PCI_CFG_BUS_SHIFT) | 1) : 0);
+	addr |= ((devfn & 0xff) << PCI_CFG_FUNC_SHIFT) | (where & 0xfc);
+
+	return addr;
+}
+
+static int
+config_access(unsigned int pci_cmd, struct pci_bus *bus, unsigned int devfn, int where, unsigned int pci_mode, unsigned int *val)
+{
+	unsigned int flags;
+	unsigned long loops = 0;
+	unsigned long ioaddr = calc_cfg_addr(bus, devfn, where);
+
+	local_irq_save(flags);
+	/*Clear pending interrupt status */
+	if (inl(PCI_BASE | PCI_GPPM_STATUS)) {
+		clear_status();
+		while (!(inl(PCI_BASE | PCI_GPPM_STATUS) == 0)) ;
+	}
+
+	outl(ioaddr, PCI_BASE | PCI_GPPM_ADDR);
+
+	if ((pci_cmd == PCI_CMD_IOW) || (pci_cmd == PCI_CMD_CONFIG_WRITE))
+		outl(*val, PCI_BASE | PCI_GPPM_WDAT);
+
+	outl(INIT_PCI_CYCLE | pci_cmd | (pci_mode & PCI_BYTE_ENABLE_MASK),
+	     PCI_BASE | PCI_GPPM_CTRL);
+
+	loops =
+	    ((loops_per_jiffy *
+	      PCI_IO_JIFFIES_TIMEOUT) >> (PCI_IO_JIFFIES_SHIFT));
+	while (1) {
+		if (inl(PCI_BASE | PCI_GPPM_STATUS) & GPPM_DONE) {
+			if ((pci_cmd == PCI_CMD_IOR) ||
+			    (pci_cmd == PCI_CMD_CONFIG_READ))
+				*val = inl(PCI_BASE | PCI_GPPM_RDAT);
+			clear_status();
+			local_irq_restore(flags);
+			return PCIBIOS_SUCCESSFUL;
+		} else if (inl(PCI_BASE | PCI_GPPM_STATUS) & GPPM_R_MABORT) {
+			break;
+		}
+
+		loops--;
+		if (loops == 0) {
+			printk("%s : Arbiter Locked.\n", __FUNCTION__);
+		}
+	}
+
+	clear_status();
+	if ((pci_cmd == PCI_CMD_IOR) || (pci_cmd == PCI_CMD_IOW)) {
+		printk("%s timeout (GPPM_CTRL=%X) ioaddr %lX pci_cmd %X\n",
+		       __FUNCTION__, inl(PCI_BASE | PCI_GPPM_CTRL), ioaddr,
+		       pci_cmd);
+	}
+
+	if ((pci_cmd == PCI_CMD_IOR) || (pci_cmd == PCI_CMD_CONFIG_READ))
+		*val = 0xffffffff;
+	local_irq_restore(flags);
+	return PCIBIOS_DEVICE_NOT_FOUND;
+}
+
+/*
+ * We can't address 8 and 16 bit words directly.  Instead we have to
+ * read/write a 32bit word and mask/modify the data we actually want.
+ */
+static int
+read_config_byte(struct pci_bus *bus, unsigned int devfn, int where, u8 * val)
+{
+	unsigned int data = 0;
+	int err;
+
+	if (bus == 0)
+		return -1;
+
+	err = config_access(PCI_CMD_CONFIG_READ, bus, devfn, where, ~(1 << (where & 3)), &data);
+	switch (where & 0x03) {
+	case 0:
+		*val = (unsigned char)(data & 0x000000ff);
+		break;
+	case 1:
+		*val = (unsigned char)((data & 0x0000ff00) >> 8);
+		break;
+	case 2:
+		*val = (unsigned char)((data & 0x00ff0000) >> 16);
+		break;
+	case 3:
+		*val = (unsigned char)((data & 0xff000000) >> 24);
+		break;
+	}
+
+	return err;
+}
+
+static int
+read_config_word(struct pci_bus *bus, unsigned int devfn, int where, u16 * val)
+{
+	unsigned int data = 0;
+	int err;
+
+	if (bus == 0)
+		return -1;
+
+	if (where & 0x01)
+		return PCIBIOS_BAD_REGISTER_NUMBER;
+
+	err = config_access(PCI_CMD_CONFIG_READ, bus, devfn, where, ~(3 << (where & 3)), &data);
+	switch (where & 0x02) {
+	case 0:
+		*val = (unsigned short)(data & 0x0000ffff);
+		break;
+	case 2:
+		*val = (unsigned short)((data & 0xffff0000) >> 16);
+		break;
+	}
+
+	return err;
+}
+
+static int
+read_config_dword(struct pci_bus *bus, unsigned int devfn, int where, u32 * val)
+{
+	int err;
+	if (bus == 0)
+		return -1;
+
+	if (where & 0x03)
+		return PCIBIOS_BAD_REGISTER_NUMBER;
+
+	err = config_access(PCI_CMD_CONFIG_READ, bus, devfn, where, 0, val);
+
+	return err;
+}
+
+static int
+write_config_byte(struct pci_bus *bus, unsigned int devfn, int where, u8 val)
+{
+	unsigned int data = (unsigned int)val;
+	int err;
+
+	if (bus == 0)
+		return -1;
+
+	switch (where & 0x03) {
+	case 1:
+		data = (data << 8);
+		break;
+	case 2:
+		data = (data << 16);
+		break;
+	case 3:
+		data = (data << 24);
+		break;
+	default:
+		break;
+	}
+
+	err = config_access(PCI_CMD_CONFIG_READ, bus, devfn, where, ~(1 << (where & 3)), &data);
+
+	return err;
+}
+
+static int
+write_config_word(struct pci_bus *bus, unsigned int devfn, int where, u16 val)
+{
+	unsigned int data = (unsigned int)val;
+	int err;
+
+	if (bus == 0)
+		return -1;
+
+	if (where & 0x01)
+		return PCIBIOS_BAD_REGISTER_NUMBER;
+
+	switch (where & 0x02) {
+	case 2:
+		data = (data << 16);
+		break;
+	default:
+		break;
+	}
+	err = config_access(PCI_CMD_CONFIG_WRITE, bus, devfn, where, ~(3 << (where & 3)), &data);
+
+	return err;
+}
+
+static int
+write_config_dword(struct pci_bus *bus, unsigned int devfn, int where, u32 val)
+{
+	int err;
+	if (bus == 0)
+		return -1;
+
+	if (where & 0x03)
+		return PCIBIOS_BAD_REGISTER_NUMBER;
+
+	err = config_access(PCI_CMD_CONFIG_WRITE, bus, devfn, where, 0, &val);
+
+	return err;
+}
+
+static int config_read(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 * val)
+{
+	switch (size) {
+	case 1: {
+			u8 _val;
+			int rc = read_config_byte(bus, devfn, where, &_val);
+			*val = _val;
+			return rc;
+		}
+       case 2: {
+			u16 _val;
+			int rc = read_config_word(bus, devfn, where, &_val);
+			*val = _val;
+			return rc;
+		}
+	default:
+		return read_config_dword(bus, devfn, where, val);
+	}
+}
+
+static int config_write(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 val)
+{
+	switch (size) {
+	case 1:
+		return write_config_byte(bus, devfn, where, (u8) val);
+	case 2:
+		return write_config_word(bus, devfn, where, (u16) val);
+	default:
+		return write_config_dword(bus, devfn, where, val);
+	}
+}
+
+struct pci_ops pnx8550_pci_ops = {
+	config_read,
+	config_write
+};
diff --git a/arch/mips/philips/pnx8550/common/Kconfig b/arch/mips/philips/pnx8550/common/Kconfig
new file mode 100644
index 00000000000..072572d173c
--- /dev/null
+++ b/arch/mips/philips/pnx8550/common/Kconfig
@@ -0,0 +1 @@
+# Place holder
diff --git a/arch/mips/philips/pnx8550/common/Makefile b/arch/mips/philips/pnx8550/common/Makefile
new file mode 100644
index 00000000000..6e38f3bc443
--- /dev/null
+++ b/arch/mips/philips/pnx8550/common/Makefile
@@ -0,0 +1,27 @@
+#
+# Per Hallsmark, per.hallsmark@mvista.com
+#
+# ########################################################################
+#
+# This program is free software; you can distribute it and/or modify it
+# under the terms of the GNU General Public License (Version 2) as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope it will be useful, but WITHOUT
+# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+# FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+# for more details.
+#
+# You should have received a copy of the GNU General Public License along
+# with this program; if not, write to the Free Software Foundation, Inc.,
+# 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+#
+# #######################################################################
+#
+# Makefile for the PNX8550 specific kernel interface routines
+# under Linux.
+#
+
+obj-y := setup.o prom.o mipsIRQ.o int.o reset.o time.o proc.o platform.o
+obj-$(CONFIG_PCI) += pci.o
+obj-$(CONFIG_KGDB) += gdb_hook.o
diff --git a/arch/mips/philips/pnx8550/common/gdb_hook.c b/arch/mips/philips/pnx8550/common/gdb_hook.c
new file mode 100644
index 00000000000..ad4624f6d9b
--- /dev/null
+++ b/arch/mips/philips/pnx8550/common/gdb_hook.c
@@ -0,0 +1,109 @@
+/*
+ * Carsten Langgaard, carstenl@mips.com
+ * Copyright (C) 2000 MIPS Technologies, Inc.  All rights reserved.
+ *
+ * ########################################################################
+ *
+ *  This program is free software; you can distribute it and/or modify it
+ *  under the terms of the GNU General Public License (Version 2) as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ *  for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ * ########################################################################
+ *
+ * This is the interface to the remote debugger stub.
+ *
+ */
+#include <linux/types.h>
+#include <linux/serial.h>
+#include <linux/serialP.h>
+#include <linux/serial_reg.h>
+#include <linux/serial_ip3106.h>
+
+#include <asm/serial.h>
+#include <asm/io.h>
+
+#include <uart.h>
+
+static struct serial_state rs_table[IP3106_NR_PORTS] = {
+};
+static struct async_struct kdb_port_info = {0};
+
+void rs_kgdb_hook(int tty_no)
+{
+	struct serial_state *ser = &rs_table[tty_no];
+
+	kdb_port_info.state = ser;
+	kdb_port_info.magic = SERIAL_MAGIC;
+	kdb_port_info.port  = tty_no;
+	kdb_port_info.flags = ser->flags;
+
+	/*
+	 * Clear all interrupts
+	 */
+	/* Clear all the transmitter FIFO counters (pointer and status) */
+	ip3106_lcr(UART_BASE, tty_no) |= IP3106_UART_LCR_TX_RST;
+	/* Clear all the receiver FIFO counters (pointer and status) */
+	ip3106_lcr(UART_BASE, tty_no) |= IP3106_UART_LCR_RX_RST;
+	/* Clear all interrupts */
+	ip3106_iclr(UART_BASE, tty_no) = IP3106_UART_INT_ALLRX |
+		IP3106_UART_INT_ALLTX;
+
+	/*
+	 * Now, initialize the UART
+	 */
+	ip3106_lcr(UART_BASE, tty_no) = IP3106_UART_LCR_8BIT;
+	ip3106_baud(UART_BASE, tty_no) = 5; // 38400 Baud
+}
+
+int putDebugChar(char c)
+{
+	/* Wait until FIFO not full */
+	while (((ip3106_fifo(UART_BASE, kdb_port_info.port) & IP3106_UART_FIFO_TXFIFO) >> 16) >= 16)
+		;
+	/* Send one char */
+	ip3106_fifo(UART_BASE, kdb_port_info.port) = c;
+
+	return 1;
+}
+
+char getDebugChar(void)
+{
+	char ch;
+
+	/* Wait until there is a char in the FIFO */
+	while (!((ip3106_fifo(UART_BASE, kdb_port_info.port) &
+					IP3106_UART_FIFO_RXFIFO) >> 8))
+		;
+	/* Read one char */
+	ch = ip3106_fifo(UART_BASE, kdb_port_info.port) &
+		IP3106_UART_FIFO_RBRTHR;
+	/* Advance the RX FIFO read pointer */
+	ip3106_lcr(UART_BASE, kdb_port_info.port) |= IP3106_UART_LCR_RX_NEXT;
+	return (ch);
+}
+
+void rs_disable_debug_interrupts(void)
+{
+	ip3106_ien(UART_BASE, kdb_port_info.port) = 0; /* Disable all interrupts */
+}
+
+void rs_enable_debug_interrupts(void)
+{
+	/* Clear all the transmitter FIFO counters (pointer and status) */
+	ip3106_lcr(UART_BASE, kdb_port_info.port) |= IP3106_UART_LCR_TX_RST;
+	/* Clear all the receiver FIFO counters (pointer and status) */
+	ip3106_lcr(UART_BASE, kdb_port_info.port) |= IP3106_UART_LCR_RX_RST;
+	/* Clear all interrupts */
+	ip3106_iclr(UART_BASE, kdb_port_info.port) = IP3106_UART_INT_ALLRX |
+		IP3106_UART_INT_ALLTX;
+	ip3106_ien(UART_BASE, kdb_port_info.port)  = IP3106_UART_INT_ALLRX; /* Enable RX interrupts */
+}
diff --git a/arch/mips/philips/pnx8550/common/int.c b/arch/mips/philips/pnx8550/common/int.c
new file mode 100644
index 00000000000..546144988bf
--- /dev/null
+++ b/arch/mips/philips/pnx8550/common/int.c
@@ -0,0 +1,293 @@
+/*
+ *
+ * Copyright (C) 2005 Embedded Alley Solutions, Inc
+ * Ported to 2.6.
+ *
+ * Per Hallsmark, per.hallsmark@mvista.com
+ * Copyright (C) 2000, 2001 MIPS Technologies, Inc.
+ * Copyright (C) 2001 Ralf Baechle
+ *
+ * Cleaned up and bug fixing: Pete Popov, ppopov@embeddedalley.com
+ *
+ *  This program is free software; you can distribute it and/or modify it
+ *  under the terms of the GNU General Public License (Version 2) as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ *  for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ */
+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/kernel_stat.h>
+#include <linux/random.h>
+#include <linux/module.h>
+
+#include <asm/io.h>
+#include <asm/gdb-stub.h>
+#include <int.h>
+#include <uart.h>
+
+extern asmlinkage void cp0_irqdispatch(void);
+
+static DEFINE_SPINLOCK(irq_lock);
+
+/* default prio for interrupts */
+/* first one is a no-no so therefore always prio 0 (disabled) */
+static char gic_prio[PNX8550_INT_GIC_TOTINT] = {
+	0, 1, 1, 1, 1, 15, 1, 1, 1, 1,	//   0 -  9
+	1, 1, 1, 1, 1, 1, 1, 1, 1, 1,	//  10 - 19
+	1, 1, 1, 1, 1, 1, 1, 1, 1, 1,	//  20 - 29
+	1, 1, 1, 1, 1, 1, 1, 1, 1, 1,	//  30 - 39
+	1, 1, 1, 1, 1, 1, 1, 1, 1, 1,	//  40 - 49
+	1, 1, 1, 1, 1, 1, 1, 1, 2, 1,	//  50 - 59
+	1, 1, 1, 1, 1, 1, 1, 1, 1, 1,	//  60 - 69
+	1			//  70
+};
+
+void hw0_irqdispatch(int irq, struct pt_regs *regs)
+{
+	/* find out which interrupt */
+	irq = PNX8550_GIC_VECTOR_0 >> 3;
+
+	if (irq == 0) {
+		printk("hw0_irqdispatch: irq 0, spurious interrupt?\n");
+		return;
+	}
+	do_IRQ(PNX8550_INT_GIC_MIN + irq, regs);
+}
+
+
+void timer_irqdispatch(int irq, struct pt_regs *regs)
+{
+	irq = (0x01c0 & read_c0_config7()) >> 6;
+
+	if (irq == 0) {
+		printk("timer_irqdispatch: irq 0, spurious interrupt?\n");
+		return;
+	}
+
+	if (irq & 0x1) {
+		do_IRQ(PNX8550_INT_TIMER1, regs);
+	}
+	if (irq & 0x2) {
+		do_IRQ(PNX8550_INT_TIMER2, regs);
+	}
+	if (irq & 0x4) {
+		do_IRQ(PNX8550_INT_TIMER3, regs);
+	}
+}
+
+static inline void modify_cp0_intmask(unsigned clr_mask, unsigned set_mask)
+{
+	unsigned long status = read_c0_status();
+
+	status &= ~((clr_mask & 0xFF) << 8);
+	status |= (set_mask & 0xFF) << 8;
+
+	write_c0_status(status);
+}
+
+static inline void mask_gic_int(unsigned int irq_nr)
+{
+	/* interrupt disabled, bit 26(WE_ENABLE)=1 and bit 16(enable)=0 */
+	PNX8550_GIC_REQ(irq_nr) = 1<<28; /* set priority to 0 */
+}
+
+static inline void unmask_gic_int(unsigned int irq_nr)
+{
+	/* set prio mask to lower four bits and enable interrupt */
+	PNX8550_GIC_REQ(irq_nr) = (1<<26 | 1<<16) | (1<<28) | gic_prio[irq_nr];
+}
+
+static inline void mask_irq(unsigned int irq_nr)
+{
+	if ((PNX8550_INT_CP0_MIN <= irq_nr) && (irq_nr <= PNX8550_INT_CP0_MAX)) {
+		modify_cp0_intmask(1 << irq_nr, 0);
+	} else if ((PNX8550_INT_GIC_MIN <= irq_nr) &&
+		(irq_nr <= PNX8550_INT_GIC_MAX)) {
+		mask_gic_int(irq_nr - PNX8550_INT_GIC_MIN);
+	} else if ((PNX8550_INT_TIMER_MIN <= irq_nr) &&
+		(irq_nr <= PNX8550_INT_TIMER_MAX)) {
+		modify_cp0_intmask(1 << 7, 0);
+	} else {
+		printk("mask_irq: irq %d doesn't exist!\n", irq_nr);
+	}
+}
+
+static inline void unmask_irq(unsigned int irq_nr)
+{
+	if ((PNX8550_INT_CP0_MIN <= irq_nr) && (irq_nr <= PNX8550_INT_CP0_MAX)) {
+		modify_cp0_intmask(0, 1 << irq_nr);
+	} else if ((PNX8550_INT_GIC_MIN <= irq_nr) &&
+		(irq_nr <= PNX8550_INT_GIC_MAX)) {
+		unmask_gic_int(irq_nr - PNX8550_INT_GIC_MIN);
+	} else if ((PNX8550_INT_TIMER_MIN <= irq_nr) &&
+		(irq_nr <= PNX8550_INT_TIMER_MAX)) {
+		modify_cp0_intmask(0, 1 << 7);
+	} else {
+		printk("mask_irq: irq %d doesn't exist!\n", irq_nr);
+	}
+}
+
+#define pnx8550_disable pnx8550_ack
+static void pnx8550_ack(unsigned int irq)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&irq_lock, flags);
+	mask_irq(irq);
+	spin_unlock_irqrestore(&irq_lock, flags);
+}
+
+#define pnx8550_enable pnx8550_unmask
+static void pnx8550_unmask(unsigned int irq)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&irq_lock, flags);
+	unmask_irq(irq);
+	spin_unlock_irqrestore(&irq_lock, flags);
+}
+
+static unsigned int startup_irq(unsigned int irq_nr)
+{
+	pnx8550_unmask(irq_nr);
+	return 0;
+}
+
+static void shutdown_irq(unsigned int irq_nr)
+{
+	pnx8550_ack(irq_nr);
+	return;
+}
+
+int pnx8550_set_gic_priority(int irq, int priority)
+{
+	int gic_irq = irq-PNX8550_INT_GIC_MIN;
+	int prev_priority = PNX8550_GIC_REQ(gic_irq) & 0xf;
+
+        gic_prio[gic_irq] = priority;
+	PNX8550_GIC_REQ(gic_irq) |= (0x10000000 | gic_prio[gic_irq]);
+
+	return prev_priority;
+}
+
+static inline void mask_and_ack_level_irq(unsigned int irq)
+{
+	pnx8550_disable(irq);
+	return;
+}
+
+static void end_irq(unsigned int irq)
+{
+	if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS))) {
+		pnx8550_enable(irq);
+	}
+}
+
+static struct hw_interrupt_type level_irq_type = {
+	.typename =	"PNX Level IRQ",
+	.startup =	startup_irq,
+	.shutdown =	shutdown_irq,
+	.enable =	pnx8550_enable,
+	.disable =	pnx8550_disable,
+	.ack =		mask_and_ack_level_irq,
+	.end =		end_irq,
+};
+
+static struct irqaction gic_action = {
+	.handler =	no_action,
+	.flags =	SA_INTERRUPT,
+	.name =		"GIC",
+};
+
+static struct irqaction timer_action = {
+	.handler =	no_action,
+	.flags =	SA_INTERRUPT,
+	.name =		"Timer",
+};
+
+void __init arch_init_irq(void)
+{
+	int i;
+	int configPR;
+
+	/* init of cp0 interrupts */
+	set_except_vector(0, cp0_irqdispatch);
+
+	for (i = 0; i < PNX8550_INT_CP0_TOTINT; i++) {
+		irq_desc[i].handler = &level_irq_type;
+		pnx8550_ack(i);	/* mask the irq just in case  */
+	}
+
+	/* init of GIC/IPC interrupts */
+	/* should be done before cp0 since cp0 init enables the GIC int */
+	for (i = PNX8550_INT_GIC_MIN; i <= PNX8550_INT_GIC_MAX; i++) {
+		int gic_int_line = i - PNX8550_INT_GIC_MIN;
+		if (gic_int_line == 0 )
+			continue;	// don't fiddle with int 0
+		/*
+		 * enable change of TARGET, ENABLE and ACTIVE_LOW bits
+		 * set TARGET        0 to route through hw0 interrupt
+		 * set ACTIVE_LOW    0 active high  (correct?)
+		 *
+		 * We really should setup an interrupt description table
+		 * to do this nicely.
+		 * Note, PCI INTA is active low on the bus, but inverted
+		 * in the GIC, so to us it's active high.
+		 */
+#ifdef CONFIG_PNX8550_V2PCI
+		if (gic_int_line == (PNX8550_INT_GPIO0 - PNX8550_INT_GIC_MIN)) {
+			/* PCI INT through gpio 8, which is setup in
+			 * pnx8550_setup.c and routed to GPIO
+ 			 * Interrupt Level 0 (GPIO Connection 58).
+			 * Set it active low. */
+
+			PNX8550_GIC_REQ(gic_int_line) = 0x1E020000;
+		} else
+#endif
+		{
+			PNX8550_GIC_REQ(i - PNX8550_INT_GIC_MIN) = 0x1E000000;
+		}
+
+		/* mask/priority is still 0 so we will not get any
+		 * interrupts until it is unmasked */
+
+		irq_desc[i].handler = &level_irq_type;
+	}
+
+	/* Priority level 0 */
+	PNX8550_GIC_PRIMASK_0 = PNX8550_GIC_PRIMASK_1 = 0;
+
+	/* Set int vector table address */
+	PNX8550_GIC_VECTOR_0 = PNX8550_GIC_VECTOR_1 = 0;
+
+	irq_desc[MIPS_CPU_GIC_IRQ].handler = &level_irq_type;
+	setup_irq(MIPS_CPU_GIC_IRQ, &gic_action);
+
+	/* init of Timer interrupts */
+	for (i = PNX8550_INT_TIMER_MIN; i <= PNX8550_INT_TIMER_MAX; i++) {
+		irq_desc[i].handler = &level_irq_type;
+	}
+
+	/* Stop Timer 1-3 */
+	configPR = read_c0_config7();
+	configPR |= 0x00000038;
+	write_c0_config7(configPR);
+
+	irq_desc[MIPS_CPU_TIMER_IRQ].handler = &level_irq_type;
+	setup_irq(MIPS_CPU_TIMER_IRQ, &timer_action);
+}
+
+EXPORT_SYMBOL(pnx8550_set_gic_priority);
diff --git a/arch/mips/philips/pnx8550/common/mipsIRQ.S b/arch/mips/philips/pnx8550/common/mipsIRQ.S
new file mode 100644
index 00000000000..338bffda3fa
--- /dev/null
+++ b/arch/mips/philips/pnx8550/common/mipsIRQ.S
@@ -0,0 +1,76 @@
+/*
+ * Copyright (c) 2002 Philips, Inc. All rights.
+ * Copyright (c) 2002 Red Hat, Inc. All rights.
+ *
+ * This software may be freely redistributed under the terms of the
+ * GNU General Public License.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * Based upon arch/mips/galileo-boards/ev64240/int-handler.S
+ *
+ */
+#include <asm/asm.h>
+#include <asm/mipsregs.h>
+#include <asm/addrspace.h>
+#include <asm/regdef.h>
+#include <asm/stackframe.h>
+
+/*
+ * cp0_irqdispatch
+ *
+ *    Code to handle in-core interrupt exception.
+ */
+
+		.align	5
+		.set	reorder
+		.set	noat
+		NESTED(cp0_irqdispatch, PT_SIZE, sp)
+		SAVE_ALL
+		CLI
+		.set	at
+		mfc0	t0,CP0_CAUSE
+		mfc0	t2,CP0_STATUS
+
+		and	t0,t2
+
+		andi	t1,t0,STATUSF_IP2 /* int0 hardware line */
+		bnez	t1,ll_hw0_irq
+		nop
+
+		andi	t1,t0,STATUSF_IP7 /* int5 hardware line */
+		bnez	t1,ll_timer_irq
+		nop
+
+		/* wrong alarm or masked ... */
+
+		j	spurious_interrupt
+		nop
+		END(cp0_irqdispatch)
+
+		.align	5
+		.set	reorder
+ll_hw0_irq:
+		li	a0,2
+		move	a1,sp
+		jal	hw0_irqdispatch
+		nop
+		j	ret_from_irq
+		nop
+
+		.align	5
+		.set	reorder
+ll_timer_irq:
+		mfc0	t3,CP0_CONFIG,7
+		andi	t4,t3,0x01c0
+		beqz	t4,ll_timer_out
+		nop
+		li	a0,7
+		move	a1,sp
+		jal	timer_irqdispatch
+		nop
+
+ll_timer_out:	j	ret_from_irq
+		nop
diff --git a/arch/mips/philips/pnx8550/common/pci.c b/arch/mips/philips/pnx8550/common/pci.c
new file mode 100644
index 00000000000..baa6905f649
--- /dev/null
+++ b/arch/mips/philips/pnx8550/common/pci.c
@@ -0,0 +1,133 @@
+/*
+ *
+ * BRIEF MODULE DESCRIPTION
+ *
+ * Author: source@mvista.com
+ *
+ *  This program is free software; you can distribute it and/or modify it
+ *  under the terms of the GNU General Public License (Version 2) as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ *  for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ */
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+
+#include <pci.h>
+#include <glb.h>
+#include <nand.h>
+
+static struct resource pci_io_resource = {
+	"pci IO space",
+	(u32)(PNX8550_PCIIO + 0x1000),	/* reserve regacy I/O space */
+	(u32)(PNX8550_PCIIO + PNX8550_PCIIO_SIZE),
+	IORESOURCE_IO
+};
+
+static struct resource pci_mem_resource = {
+	"pci memory space",
+	(u32)(PNX8550_PCIMEM),
+	(u32)(PNX8550_PCIMEM + PNX8550_PCIMEM_SIZE - 1),
+	IORESOURCE_MEM
+};
+
+extern struct pci_ops pnx8550_pci_ops;
+
+static struct pci_controller pnx8550_controller = {
+	.pci_ops	= &pnx8550_pci_ops,
+	.io_resource	= &pci_io_resource,
+	.mem_resource	= &pci_mem_resource,
+};
+
+/* Return the total size of DRAM-memory, (RANK0 + RANK1) */
+static inline unsigned long get_system_mem_size(void)
+{
+	/* Read IP2031_RANK0_ADDR_LO */
+	unsigned long dram_r0_lo = inl(PCI_BASE | 0x65010);
+	/* Read IP2031_RANK1_ADDR_HI */
+	unsigned long dram_r1_hi = inl(PCI_BASE | 0x65018);
+
+	return dram_r1_hi - dram_r0_lo + 1;
+}
+
+static int __init pnx8550_pci_setup(void)
+{
+	int pci_mem_code;
+	int mem_size = get_system_mem_size() >> 20;
+
+	/* Clear the Global 2 Register, PCI Inta Output Enable Registers
+	   Bit 1:Enable DAC Powerdown
+	  -> 0:DACs are enabled and are working normally
+	     1:DACs are powerdown
+	   Bit 0:Enable of PCI inta output
+	  -> 0 = Disable PCI inta output
+	     1 = Enable PCI inta output
+	*/
+	PNX8550_GLB2_ENAB_INTA_O = 0;
+
+	/* Calc the PCI mem size code */
+	if (mem_size >= 128)
+		pci_mem_code = SIZE_128M;
+	else if (mem_size >= 64)
+		pci_mem_code = SIZE_64M;
+	else if (mem_size >= 32)
+		pci_mem_code = SIZE_32M;
+	else
+		pci_mem_code = SIZE_16M;
+
+	/* Set PCI_XIO registers */
+	outl(pci_mem_resource.start, PCI_BASE | PCI_BASE1_LO);
+	outl(pci_mem_resource.end + 1, PCI_BASE | PCI_BASE1_HI);
+	outl(pci_io_resource.start, PCI_BASE | PCI_BASE2_LO);
+	outl(pci_io_resource.end, PCI_BASE | PCI_BASE2_HI);
+
+	/* Send memory transaction via PCI_BASE2 */
+	outl(0x00000001, PCI_BASE | PCI_IO);
+
+	/* Unlock the setup register */
+	outl(0xca, PCI_BASE | PCI_UNLOCKREG);
+
+	/*
+	 * BAR0 of PNX8550 (pci base 10) must be zero in order for ide
+	 * to work, and in order for bus_to_baddr to work without any
+	 * hacks.
+	 */
+	outl(0x00000000, PCI_BASE | PCI_BASE10);
+
+	/*
+	 *These two bars are set by default or the boot code.
+	 * However, it's safer to set them here so we're not boot
+	 * code dependent.
+	 */
+	outl(0x1be00000, PCI_BASE | PCI_BASE14);  /* PNX MMIO */
+	outl(PNX8550_NAND_BASE_ADDR, PCI_BASE | PCI_BASE18);  /* XIO      */
+
+	outl(PCI_EN_TA |
+	     PCI_EN_PCI2MMI |
+	     PCI_EN_XIO |
+	     PCI_SETUP_BASE18_SIZE(SIZE_32M) |
+	     PCI_SETUP_BASE18_EN |
+	     PCI_SETUP_BASE14_EN |
+	     PCI_SETUP_BASE10_PREF |
+	     PCI_SETUP_BASE10_SIZE(pci_mem_code) |
+	     PCI_SETUP_CFGMANAGE_EN |
+	     PCI_SETUP_PCIARB_EN,
+	     PCI_BASE |
+	     PCI_SETUP);	/* PCI_SETUP */
+	outl(0x00000000, PCI_BASE | PCI_CTRL);	/* PCI_CONTROL */
+
+	register_pci_controller(&pnx8550_controller);
+
+	return 0;
+}
+
+arch_initcall(pnx8550_pci_setup);
diff --git a/arch/mips/philips/pnx8550/common/platform.c b/arch/mips/philips/pnx8550/common/platform.c
new file mode 100644
index 00000000000..8aa9bd65b45
--- /dev/null
+++ b/arch/mips/philips/pnx8550/common/platform.c
@@ -0,0 +1,135 @@
+/*
+ * Platform device support for Philips PNX8550 SoCs
+ *
+ * Copyright 2005, Embedded Alley Solutions, Inc
+ *
+ * Based on arch/mips/au1000/common/platform.c
+ * Platform device support for Au1x00 SoCs.
+ *
+ * Copyright 2004, Matt Porter <mporter@kernel.crashing.org>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#include <linux/device.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/resource.h>
+#include <linux/serial.h>
+#include <linux/serial_ip3106.h>
+
+#include <int.h>
+#include <usb.h>
+#include <uart.h>
+
+extern struct uart_ops ip3106_pops;
+
+static struct resource pnx8550_usb_ohci_resources[] = {
+	[0] = {
+		.start		= PNX8550_USB_OHCI_OP_BASE,
+		.end		= PNX8550_USB_OHCI_OP_BASE +
+				  PNX8550_USB_OHCI_OP_LEN,
+		.flags		= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start		= PNX8550_INT_USB,
+		.end		= PNX8550_INT_USB,
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct resource pnx8550_uart_resources[] = {
+	[0] = {
+		.start		= PNX8550_UART_PORT0,
+		.end		= PNX8550_UART_PORT0 + 0xfff,
+		.flags		= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start		= PNX8550_UART_INT(0),
+		.end		= PNX8550_UART_INT(0),
+		.flags		= IORESOURCE_IRQ,
+	},
+	[2] = {
+		.start		= PNX8550_UART_PORT1,
+		.end		= PNX8550_UART_PORT1 + 0xfff,
+		.flags		= IORESOURCE_MEM,
+	},
+	[3] = {
+		.start		= PNX8550_UART_INT(1),
+		.end		= PNX8550_UART_INT(1),
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+struct ip3106_port ip3106_ports[] = {
+	[0] = {
+		.port   = {
+			.type		= PORT_IP3106,
+			.iotype		= SERIAL_IO_MEM,
+			.membase	= (void __iomem *)PNX8550_UART_PORT0,
+			.mapbase	= PNX8550_UART_PORT0,
+			.irq		= PNX8550_UART_INT(0),
+			.uartclk	= 3692300,
+			.fifosize	= 16,
+			.ops		= &ip3106_pops,
+			.flags		= ASYNC_BOOT_AUTOCONF,
+			.line		= 0,
+		},
+	},
+	[1] = {
+		.port   = {
+			.type		= PORT_IP3106,
+			.iotype		= SERIAL_IO_MEM,
+			.membase	= (void __iomem *)PNX8550_UART_PORT1,
+			.mapbase	= PNX8550_UART_PORT1,
+			.irq		= PNX8550_UART_INT(1),
+			.uartclk	= 3692300,
+			.fifosize	= 16,
+			.ops		= &ip3106_pops,
+			.flags		= ASYNC_BOOT_AUTOCONF,
+			.line		= 1,
+		},
+	},
+};
+
+/* The dmamask must be set for OHCI to work */
+static u64 ohci_dmamask = ~(u32)0;
+
+static u64 uart_dmamask = ~(u32)0;
+
+static struct platform_device pnx8550_usb_ohci_device = {
+	.name		= "pnx8550-ohci",
+	.id		= -1,
+	.dev = {
+		.dma_mask		= &ohci_dmamask,
+		.coherent_dma_mask	= 0xffffffff,
+	},
+	.num_resources	= ARRAY_SIZE(pnx8550_usb_ohci_resources),
+	.resource	= pnx8550_usb_ohci_resources,
+};
+
+static struct platform_device pnx8550_uart_device = {
+	.name		= "ip3106-uart",
+	.id		= -1,
+	.dev = {
+		.dma_mask		= &uart_dmamask,
+		.coherent_dma_mask	= 0xffffffff,
+		.platform_data = ip3106_ports,
+	},
+	.num_resources	= ARRAY_SIZE(pnx8550_uart_resources),
+	.resource	= pnx8550_uart_resources,
+};
+
+static struct platform_device *pnx8550_platform_devices[] __initdata = {
+	&pnx8550_usb_ohci_device,
+	&pnx8550_uart_device,
+};
+
+int pnx8550_platform_init(void)
+{
+	return platform_add_devices(pnx8550_platform_devices,
+			            ARRAY_SIZE(pnx8550_platform_devices));
+}
+
+arch_initcall(pnx8550_platform_init);
diff --git a/arch/mips/philips/pnx8550/common/proc.c b/arch/mips/philips/pnx8550/common/proc.c
new file mode 100644
index 00000000000..72a016767e0
--- /dev/null
+++ b/arch/mips/philips/pnx8550/common/proc.c
@@ -0,0 +1,113 @@
+/*
+ *  This program is free software; you can distribute it and/or modify it
+ *  under the terms of the GNU General Public License (Version 2) as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ *  for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ */
+#include <linux/init.h>
+#include <linux/proc_fs.h>
+#include <linux/irq.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/kernel_stat.h>
+#include <linux/random.h>
+
+#include <asm/io.h>
+#include <asm/gdb-stub.h>
+#include <int.h>
+#include <uart.h>
+
+
+static int pnx8550_timers_read (char* page, char** start, off_t offset, int count, int* eof, void* data)
+{
+        int len = 0;
+	int configPR = read_c0_config7();
+
+        if (offset==0) {
+		len += sprintf(&page[len],"Timer:       count,  compare, tc, status\n");
+                len += sprintf(&page[len],"    1: %11i, %8i,  %1i, %s\n",
+			       read_c0_count(), read_c0_compare(),
+			      (configPR>>6)&0x1, ((configPR>>3)&0x1)? "off":"on");
+                len += sprintf(&page[len],"    2: %11i, %8i,  %1i, %s\n",
+			       read_c0_count2(), read_c0_compare2(),
+			      (configPR>>7)&0x1, ((configPR>>4)&0x1)? "off":"on");
+                len += sprintf(&page[len],"    3: %11i, %8i,  %1i, %s\n",
+			       read_c0_count3(), read_c0_compare3(),
+			      (configPR>>8)&0x1, ((configPR>>5)&0x1)? "off":"on");
+        }
+
+        return len;
+}
+
+static int pnx8550_registers_read (char* page, char** start, off_t offset, int count, int* eof, void* data)
+{
+        int len = 0;
+
+        if (offset==0) {
+                len += sprintf(&page[len],"config1:   %#10.8x\n",read_c0_config1());
+                len += sprintf(&page[len],"config2:   %#10.8x\n",read_c0_config2());
+                len += sprintf(&page[len],"config3:   %#10.8x\n",read_c0_config3());
+                len += sprintf(&page[len],"configPR:  %#10.8x\n",read_c0_config7());
+                len += sprintf(&page[len],"status:    %#10.8x\n",read_c0_status());
+                len += sprintf(&page[len],"cause:     %#10.8x\n",read_c0_cause());
+                len += sprintf(&page[len],"count:     %#10.8x\n",read_c0_count());
+                len += sprintf(&page[len],"count_2:   %#10.8x\n",read_c0_count2());
+                len += sprintf(&page[len],"count_3:   %#10.8x\n",read_c0_count3());
+                len += sprintf(&page[len],"compare:   %#10.8x\n",read_c0_compare());
+                len += sprintf(&page[len],"compare_2: %#10.8x\n",read_c0_compare2());
+                len += sprintf(&page[len],"compare_3: %#10.8x\n",read_c0_compare3());
+        }
+
+        return len;
+}
+
+static struct proc_dir_entry* pnx8550_dir        = NULL;
+static struct proc_dir_entry* pnx8550_timers     = NULL;
+static struct proc_dir_entry* pnx8550_registers  = NULL;
+
+static int pnx8550_proc_init( void )
+{
+
+	// Create /proc/pnx8550
+        pnx8550_dir = create_proc_entry("pnx8550", S_IFDIR|S_IRUGO, NULL);
+        if (pnx8550_dir){
+                pnx8550_dir->nlink = 1;
+        }
+        else {
+                printk(KERN_ERR "Can't create pnx8550 proc dir\n");
+                return -1;
+        }
+
+	// Create /proc/pnx8550/timers
+        pnx8550_timers = create_proc_entry("timers", S_IFREG|S_IRUGO, pnx8550_dir );
+        if (pnx8550_timers){
+                pnx8550_timers->nlink = 1;
+                pnx8550_timers->read_proc = pnx8550_timers_read;
+        }
+        else {
+                printk(KERN_ERR "Can't create pnx8550 timers proc file\n");
+        }
+
+	// Create /proc/pnx8550/registers
+        pnx8550_registers = create_proc_entry("registers", S_IFREG|S_IRUGO, pnx8550_dir );
+        if (pnx8550_registers){
+                pnx8550_registers->nlink = 1;
+                pnx8550_registers->read_proc = pnx8550_registers_read;
+        }
+        else {
+                printk(KERN_ERR "Can't create pnx8550 registers proc file\n");
+        }
+
+	return 0;
+}
+
+__initcall(pnx8550_proc_init);
diff --git a/arch/mips/philips/pnx8550/common/prom.c b/arch/mips/philips/pnx8550/common/prom.c
new file mode 100644
index 00000000000..70aac975941
--- /dev/null
+++ b/arch/mips/philips/pnx8550/common/prom.c
@@ -0,0 +1,138 @@
+/*
+ *
+ * Per Hallsmark, per.hallsmark@mvista.com
+ *
+ * Based on jmr3927/common/prom.c
+ *
+ * 2004 (c) MontaVista Software, Inc. This file is licensed under the
+ * terms of the GNU General Public License version 2. This program is
+ * licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/string.h>
+#include <linux/serial_ip3106.h>
+
+#include <asm/bootinfo.h>
+#include <uart.h>
+
+/* #define DEBUG_CMDLINE */
+
+extern int prom_argc;
+extern char **prom_argv, **prom_envp;
+
+typedef struct
+{
+    char *name;
+/*    char *val; */
+}t_env_var;
+
+
+char * prom_getcmdline(void)
+{
+	return &(arcs_cmdline[0]);
+}
+
+void  prom_init_cmdline(void)
+{
+	char *cp;
+	int actr;
+
+	actr = 1; /* Always ignore argv[0] */
+
+	cp = &(arcs_cmdline[0]);
+	while(actr < prom_argc) {
+	        strcpy(cp, prom_argv[actr]);
+		cp += strlen(prom_argv[actr]);
+		*cp++ = ' ';
+		actr++;
+	}
+	if (cp != &(arcs_cmdline[0])) /* get rid of trailing space */
+		--cp;
+	*cp = '\0';
+}
+
+char *prom_getenv(char *envname)
+{
+	/*
+	 * Return a pointer to the given environment variable.
+	 * Environment variables are stored in the form of "memsize=64".
+	 */
+
+	t_env_var *env = (t_env_var *)prom_envp;
+	int i;
+
+	i = strlen(envname);
+
+	while(env->name) {
+		if(strncmp(envname, env->name, i) == 0) {
+			return(env->name + strlen(envname) + 1);
+		}
+		env++;
+	}
+	return(NULL);
+}
+
+inline unsigned char str2hexnum(unsigned char c)
+{
+	if(c >= '0' && c <= '9')
+		return c - '0';
+	if(c >= 'a' && c <= 'f')
+		return c - 'a' + 10;
+	if(c >= 'A' && c <= 'F')
+		return c - 'A' + 10;
+	return 0; /* foo */
+}
+
+inline void str2eaddr(unsigned char *ea, unsigned char *str)
+{
+	int i;
+
+	for(i = 0; i < 6; i++) {
+		unsigned char num;
+
+		if((*str == '.') || (*str == ':'))
+			str++;
+		num = str2hexnum(*str++) << 4;
+		num |= (str2hexnum(*str++));
+		ea[i] = num;
+	}
+}
+
+int get_ethernet_addr(char *ethernet_addr)
+{
+        char *ethaddr_str;
+
+        ethaddr_str = prom_getenv("ethaddr");
+	if (!ethaddr_str) {
+	        printk("ethaddr not set in boot prom\n");
+		return -1;
+	}
+	str2eaddr(ethernet_addr, ethaddr_str);
+	return 0;
+}
+
+unsigned long __init prom_free_prom_memory(void)
+{
+	return 0;
+}
+
+extern int pnx8550_console_port;
+
+/* used by prom_printf */
+void prom_putchar(char c)
+{
+	if (pnx8550_console_port != -1) {
+		/* Wait until FIFO not full */
+		while( ((ip3106_fifo(UART_BASE, pnx8550_console_port) & IP3106_UART_FIFO_TXFIFO) >> 16) >= 16)
+			;
+		/* Send one char */
+		ip3106_fifo(UART_BASE, pnx8550_console_port) = c;
+	}
+}
+
+EXPORT_SYMBOL(prom_getcmdline);
+EXPORT_SYMBOL(get_ethernet_addr);
+EXPORT_SYMBOL(str2eaddr);
diff --git a/arch/mips/philips/pnx8550/common/reset.c b/arch/mips/philips/pnx8550/common/reset.c
new file mode 100644
index 00000000000..7b2cbc5b2c7
--- /dev/null
+++ b/arch/mips/philips/pnx8550/common/reset.c
@@ -0,0 +1,49 @@
+/*.
+ *
+ * ########################################################################
+ *
+ *  This program is free software; you can distribute it and/or modify it
+ *  under the terms of the GNU General Public License (Version 2) as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ *  for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ * ########################################################################
+ *
+ * Reset the PNX8550 board.
+ *
+ */
+#include <linux/slab.h>
+#include <asm/reboot.h>
+#include <glb.h>
+
+void pnx8550_machine_restart(char *command)
+{
+	char head[] = "************* Machine restart *************";
+	char foot[] = "*******************************************";
+
+	printk("\n\n");
+	printk("%s\n", head);
+	if (command != NULL)
+		printk("* %s\n", command);
+	printk("%s\n", foot);
+
+	PNX8550_RST_CTL = PNX8550_RST_DO_SW_RST;
+}
+
+void pnx8550_machine_halt(void)
+{
+	printk("*** Machine halt. (Not implemented) ***\n");
+}
+
+void pnx8550_machine_power_off(void)
+{
+	printk("*** Machine power off.  (Not implemented) ***\n");
+}
diff --git a/arch/mips/philips/pnx8550/common/setup.c b/arch/mips/philips/pnx8550/common/setup.c
new file mode 100644
index 00000000000..ee6bf72094f
--- /dev/null
+++ b/arch/mips/philips/pnx8550/common/setup.c
@@ -0,0 +1,149 @@
+/*
+ *
+ * 2.6 port, Embedded Alley Solutions, Inc
+ *
+ *  Based on Per Hallsmark, per.hallsmark@mvista.com
+ *
+ *  This program is free software; you can distribute it and/or modify it
+ *  under the terms of the GNU General Public License (Version 2) as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ *  for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ */
+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/sched.h>
+#include <linux/ioport.h>
+#include <linux/mm.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/serial_ip3106.h>
+
+#include <asm/cpu.h>
+#include <asm/bootinfo.h>
+#include <asm/irq.h>
+#include <asm/mipsregs.h>
+#include <asm/reboot.h>
+#include <asm/pgtable.h>
+#include <asm/time.h>
+
+#include <glb.h>
+#include <int.h>
+#include <pci.h>
+#include <uart.h>
+#include <nand.h>
+
+extern void prom_printf(char *fmt, ...);
+
+extern void __init board_setup(void);
+extern void pnx8550_machine_restart(char *);
+extern void pnx8550_machine_halt(void);
+extern void pnx8550_machine_power_off(void);
+extern struct resource ioport_resource;
+extern struct resource iomem_resource;
+extern void (*board_time_init)(void);
+extern void pnx8550_time_init(void);
+extern void (*board_timer_setup)(struct irqaction *irq);
+extern void pnx8550_timer_setup(struct irqaction *irq);
+extern void rs_kgdb_hook(int tty_no);
+extern void prom_printf(char *fmt, ...);
+extern char *prom_getcmdline(void);
+
+struct resource standard_io_resources[] = {
+	{"dma1", 0x00, 0x1f, IORESOURCE_BUSY},
+	{"timer", 0x40, 0x5f, IORESOURCE_BUSY},
+	{"dma page reg", 0x80, 0x8f, IORESOURCE_BUSY},
+	{"dma2", 0xc0, 0xdf, IORESOURCE_BUSY},
+};
+
+#define STANDARD_IO_RESOURCES (sizeof(standard_io_resources)/sizeof(struct resource))
+
+extern struct resource pci_io_resource;
+extern struct resource pci_mem_resource;
+
+/* Return the total size of DRAM-memory, (RANK0 + RANK1) */
+unsigned long get_system_mem_size(void)
+{
+	/* Read IP2031_RANK0_ADDR_LO */
+	unsigned long dram_r0_lo = inl(PCI_BASE | 0x65010);
+	/* Read IP2031_RANK1_ADDR_HI */
+	unsigned long dram_r1_hi = inl(PCI_BASE | 0x65018);
+
+	return dram_r1_hi - dram_r0_lo + 1;
+}
+
+int pnx8550_console_port = -1;
+
+void __init plat_setup(void)
+{
+	int i;
+	char* argptr;
+
+	board_setup();  /* board specific setup */
+
+        _machine_restart = pnx8550_machine_restart;
+        _machine_halt = pnx8550_machine_halt;
+        _machine_power_off = pnx8550_machine_power_off;
+
+	board_time_init = pnx8550_time_init;
+	board_timer_setup = pnx8550_timer_setup;
+
+	/* Clear the Global 2 Register, PCI Inta Output Enable Registers
+	   Bit 1:Enable DAC Powerdown
+	  -> 0:DACs are enabled and are working normally
+	     1:DACs are powerdown
+	   Bit 0:Enable of PCI inta output
+	  -> 0 = Disable PCI inta output
+	     1 = Enable PCI inta output
+	*/
+	PNX8550_GLB2_ENAB_INTA_O = 0;
+
+	/* IO/MEM resources. */
+	set_io_port_base(KSEG1);
+	ioport_resource.start = 0;
+	ioport_resource.end = ~0;
+	iomem_resource.start = 0;
+	iomem_resource.end = ~0;
+
+	/* Request I/O space for devices on this board */
+	for (i = 0; i < STANDARD_IO_RESOURCES; i++)
+		request_resource(&ioport_resource, standard_io_resources + i);
+
+	/* Place the Mode Control bit for GPIO pin 16 in primary function */
+	/* Pin 16 is used by UART1, UA1_TX                                */
+	outl((PNX8550_GPIO_MODE_PRIMOP << PNX8550_GPIO_MC_16_BIT) |
+			(PNX8550_GPIO_MODE_PRIMOP << PNX8550_GPIO_MC_17_BIT),
+			PNX8550_GPIO_MC1);
+
+	argptr = prom_getcmdline();
+	if ((argptr = strstr(argptr, "console=ttyS")) != NULL) {
+		argptr += strlen("console=ttyS");
+		pnx8550_console_port = *argptr == '0' ? 0 : 1;
+
+		/* We must initialize the UART (console) before prom_printf */
+		/* Set LCR to 8-bit and BAUD to 38400 (no 5)                */
+		ip3106_lcr(UART_BASE, pnx8550_console_port) =
+			IP3106_UART_LCR_8BIT;
+		ip3106_baud(UART_BASE, pnx8550_console_port) = 5;
+	}
+
+#ifdef CONFIG_KGDB
+	argptr = prom_getcmdline();
+	if ((argptr = strstr(argptr, "kgdb=ttyS")) != NULL) {
+		int line;
+		argptr += strlen("kgdb=ttyS");
+		line = *argptr == '0' ? 0 : 1;
+		rs_kgdb_hook(line);
+		prom_printf("KGDB: Using ttyS%i for session, "
+				"please connect your debugger\n", line ? 1 : 0);
+	}
+#endif
+	return;
+}
diff --git a/arch/mips/philips/pnx8550/common/time.c b/arch/mips/philips/pnx8550/common/time.c
new file mode 100644
index 00000000000..70664ea96b9
--- /dev/null
+++ b/arch/mips/philips/pnx8550/common/time.c
@@ -0,0 +1,105 @@
+/*
+ * Copyright 2001, 2002, 2003 MontaVista Software Inc.
+ * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net
+ *
+ * Common time service routines for MIPS machines. See
+ * Documents/MIPS/README.txt.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/sched.h>
+#include <linux/param.h>
+#include <linux/time.h>
+#include <linux/timer.h>
+#include <linux/smp.h>
+#include <linux/kernel_stat.h>
+#include <linux/spinlock.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+
+#include <asm/bootinfo.h>
+#include <asm/cpu.h>
+#include <asm/time.h>
+#include <asm/hardirq.h>
+#include <asm/div64.h>
+#include <asm/debug.h>
+
+#include <int.h>
+#include <cm.h>
+
+extern unsigned int mips_hpt_frequency;
+
+/*
+ * pnx8550_time_init() - it does the following things:
+ *
+ * 1) board_time_init() -
+ * 	a) (optional) set up RTC routines,
+ *      b) (optional) calibrate and set the mips_hpt_frequency
+ *	    (only needed if you intended to use fixed_rate_gettimeoffset
+ *	     or use cpu counter as timer interrupt source)
+ */
+
+void pnx8550_time_init(void)
+{
+	unsigned int             n;
+	unsigned int             m;
+	unsigned int             p;
+	unsigned int             pow2p;
+
+        /* PLL0 sets MIPS clock (PLL1 <=> TM1, PLL6 <=> TM2, PLL5 <=> mem) */
+        /* (but only if CLK_MIPS_CTL select value [bits 3:1] is 1:  FIXME) */
+
+        n = (PNX8550_CM_PLL0_CTL & PNX8550_CM_PLL_N_MASK) >> 16;
+        m = (PNX8550_CM_PLL0_CTL & PNX8550_CM_PLL_M_MASK) >> 8;
+        p = (PNX8550_CM_PLL0_CTL & PNX8550_CM_PLL_P_MASK) >> 2;
+	pow2p = (1 << p);
+
+	db_assert(m != 0 && pow2p != 0);
+
+        /*
+	 * Compute the frequency as in the PNX8550 User Manual 1.0, p.186
+	 * (a.k.a. 8-10).  Divide by HZ for a timer offset that results in
+	 * HZ timer interrupts per second.
+	 */
+	mips_hpt_frequency = 27UL * ((1000000UL * n)/(m * pow2p));
+}
+
+/*
+ * pnx8550_timer_setup() - it does the following things:
+ *
+ * 5) board_timer_setup() -
+ *	a) (optional) over-write any choices made above by time_init().
+ *	b) machine specific code should setup the timer irqaction.
+ *	c) enable the timer interrupt
+ */
+
+void __init pnx8550_timer_setup(struct irqaction *irq)
+{
+	int configPR;
+
+	setup_irq(PNX8550_INT_TIMER1, irq);
+
+	/* Start timer1 */
+	configPR = read_c0_config7();
+	configPR &= ~0x00000008;
+	write_c0_config7(configPR);
+
+	/* Timer 2 stop */
+	configPR = read_c0_config7();
+	configPR |= 0x00000010;
+	write_c0_config7(configPR);
+
+	write_c0_count2(0);
+	write_c0_compare2(0xffffffff);
+
+	/* Timer 3 stop */
+	configPR = read_c0_config7();
+	configPR |= 0x00000020;
+	write_c0_config7(configPR);
+}
diff --git a/arch/mips/philips/pnx8550/jbs/Makefile b/arch/mips/philips/pnx8550/jbs/Makefile
new file mode 100644
index 00000000000..e8228dbca8f
--- /dev/null
+++ b/arch/mips/philips/pnx8550/jbs/Makefile
@@ -0,0 +1,4 @@
+
+# Makefile for the Philips JBS Board.
+
+lib-y := init.o board_setup.o irqmap.o
diff --git a/arch/mips/philips/pnx8550/jbs/board_setup.c b/arch/mips/philips/pnx8550/jbs/board_setup.c
new file mode 100644
index 00000000000..f92826e0096
--- /dev/null
+++ b/arch/mips/philips/pnx8550/jbs/board_setup.c
@@ -0,0 +1,65 @@
+/*
+ *  JBS Specific board startup routines.
+ *
+ *  Copyright 2005, Embedded Alley Solutions, Inc
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  You should have received a copy of the  GNU General Public License along
+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#include <linux/init.h>
+#include <linux/sched.h>
+#include <linux/ioport.h>
+#include <linux/mm.h>
+#include <linux/console.h>
+#include <linux/mc146818rtc.h>
+#include <linux/delay.h>
+
+#include <asm/cpu.h>
+#include <asm/bootinfo.h>
+#include <asm/irq.h>
+#include <asm/mipsregs.h>
+#include <asm/reboot.h>
+#include <asm/pgtable.h>
+
+#include <glb.h>
+
+/* CP0 hazard avoidance. */
+#define BARRIER __asm__ __volatile__(".set noreorder\n\t" \
+				     "nop; nop; nop; nop; nop; nop;\n\t" \
+				     ".set reorder\n\t")
+
+void __init board_setup(void)
+{
+	unsigned long config0, configpr;
+
+	config0 = read_c0_config();
+
+	/* clear all three cache coherency fields */
+	config0 &= ~(0x7 | (7<<25) | (7<<28));
+	config0 |= (CONF_CM_DEFAULT | (CONF_CM_DEFAULT<<25) |
+			(CONF_CM_DEFAULT<<28));
+	write_c0_config(config0);
+	BARRIER;
+
+	configpr = read_c0_config7();
+	configpr |= (1<<19); /* enable tlb */
+	write_c0_config7(configpr);
+	BARRIER;
+}
diff --git a/arch/mips/philips/pnx8550/jbs/init.c b/arch/mips/philips/pnx8550/jbs/init.c
new file mode 100644
index 00000000000..85f449174bc
--- /dev/null
+++ b/arch/mips/philips/pnx8550/jbs/init.c
@@ -0,0 +1,57 @@
+/*
+ *
+ *  Copyright 2005 Embedded Alley Solutions, Inc
+ *  source@embeddedalley.com
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  You should have received a copy of the  GNU General Public License along
+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/sched.h>
+#include <linux/bootmem.h>
+#include <asm/addrspace.h>
+#include <asm/bootinfo.h>
+#include <linux/string.h>
+#include <linux/kernel.h>
+
+int prom_argc;
+char **prom_argv, **prom_envp;
+extern void  __init prom_init_cmdline(void);
+extern char *prom_getenv(char *envname);
+
+const char *get_system_type(void)
+{
+	return "Philips PNX8550/JBS";
+}
+
+void __init prom_init(void)
+{
+
+	unsigned long memsize;
+
+	mips_machgroup = MACH_GROUP_PHILIPS;
+	mips_machtype = MACH_PHILIPS_JBS;
+
+	//memsize = 0x02800000; /* Trimedia uses memory above */
+	memsize = 0x08000000; /* Trimedia uses memory above */
+	add_memory_region(0, memsize, BOOT_MEM_RAM);
+}
diff --git a/arch/mips/philips/pnx8550/jbs/irqmap.c b/arch/mips/philips/pnx8550/jbs/irqmap.c
new file mode 100644
index 00000000000..f78e0423dc9
--- /dev/null
+++ b/arch/mips/philips/pnx8550/jbs/irqmap.c
@@ -0,0 +1,36 @@
+/*
+ *  Philips JBS board irqmap.
+ *
+ *  Copyright 2005 Embedded Alley Solutions, Inc
+ *  source@embeddealley.com
+ *
+ *  This program is free software; you can redistribute	 it and/or modify it
+ *  under  the terms of	 the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the	License, or (at your
+ *  option) any later version.
+ *
+ *  THIS  SOFTWARE  IS PROVIDED	  ``AS	IS'' AND   ANY	EXPRESS OR IMPLIED
+ *  WARRANTIES,	  INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ *  NO	EVENT  SHALL   THE AUTHOR  BE	 LIABLE FOR ANY	  DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ *  NOT LIMITED	  TO, PROCUREMENT OF  SUBSTITUTE GOODS	OR SERVICES; LOSS OF
+ *  USE, DATA,	OR PROFITS; OR	BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ *  ANY THEORY OF LIABILITY, WHETHER IN	 CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  You should have received a copy of the  GNU General Public License along
+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/init.h>
+#include <int.h>
+
+char irq_tab_jbs[][5] __initdata = {
+ [8] =	{ -1, PNX8550_INT_PCI_INTA, 0xff, 0xff, 0xff},
+ [9] =	{ -1, PNX8550_INT_PCI_INTA, 0xff, 0xff, 0xff},
+ [17] =	{ -1, PNX8550_INT_PCI_INTA, 0xff, 0xff, 0xff},
+};
+
diff --git a/include/asm-mips/bootinfo.h b/include/asm-mips/bootinfo.h
index e5c03c525bd..3870a76efc3 100644
--- a/include/asm-mips/bootinfo.h
+++ b/include/asm-mips/bootinfo.h
@@ -137,6 +137,7 @@
 #define MACH_GROUP_PHILIPS     14
 #define  MACH_PHILIPS_NINO	0	/* Nino */
 #define  MACH_PHILIPS_VELO	1	/* Velo */
+#define  MACH_PHILIPS_JBS	2	/* JBS */
 
 /*
  * Valid machtype for group Globespan
diff --git a/include/asm-mips/cpu.h b/include/asm-mips/cpu.h
index 3bbb6431d21..ed92c0b1441 100644
--- a/include/asm-mips/cpu.h
+++ b/include/asm-mips/cpu.h
@@ -52,6 +52,7 @@
 #define PRID_IMP_VR41XX		0x0c00
 #define PRID_IMP_R12000		0x0e00
 #define PRID_IMP_R8000		0x1000
+#define PRID_IMP_PR4450		0x1200
 #define PRID_IMP_R4600		0x2000
 #define PRID_IMP_R4700		0x2100
 #define PRID_IMP_TX39		0x2200
@@ -187,7 +188,8 @@
 #define CPU_24K			58
 #define CPU_AU1200		59
 #define CPU_34K			60
-#define CPU_LAST		60
+#define CPU_PR4450		61
+#define CPU_LAST		61
 
 /*
  * ISA Level encodings
diff --git a/include/asm-mips/mach-pnx8550/cm.h b/include/asm-mips/mach-pnx8550/cm.h
new file mode 100644
index 00000000000..bb0a56c7d01
--- /dev/null
+++ b/include/asm-mips/mach-pnx8550/cm.h
@@ -0,0 +1,43 @@
+/*
+ *
+ * BRIEF MODULE DESCRIPTION
+ *   Clock module specific definitions
+ *
+ * Author: source@mvista.com
+ *
+ *  This program is free software; you can distribute it and/or modify it
+ *  under the terms of the GNU General Public License (Version 2) as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ *  for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ */
+
+#ifndef __PNX8550_CM_H
+#define __PNX8550_CM_H
+
+#define PNX8550_CM_BASE	0xBBE47000
+
+#define PNX8550_CM_PLL0_CTL    *(volatile unsigned long *)(PNX8550_CM_BASE + 0x000)
+#define PNX8550_CM_PLL1_CTL    *(volatile unsigned long *)(PNX8550_CM_BASE + 0x004)
+#define PNX8550_CM_PLL2_CTL    *(volatile unsigned long *)(PNX8550_CM_BASE + 0x008)
+#define PNX8550_CM_PLL3_CTL    *(volatile unsigned long *)(PNX8550_CM_BASE + 0x00C)
+
+// Table not complete.....
+
+#define PNX8550_CM_PLL_BLOCKED_MASK     0x80000000
+#define PNX8550_CM_PLL_LOCK_MASK        0x40000000
+#define PNX8550_CM_PLL_CURRENT_ADJ_MASK 0x3c000000
+#define PNX8550_CM_PLL_N_MASK           0x01ff0000
+#define PNX8550_CM_PLL_M_MASK           0x00003f00
+#define PNX8550_CM_PLL_P_MASK           0x0000000c
+#define PNX8550_CM_PLL_PD_MASK          0x00000002
+
+
+#endif
diff --git a/include/asm-mips/mach-pnx8550/glb.h b/include/asm-mips/mach-pnx8550/glb.h
new file mode 100644
index 00000000000..07aa85e609b
--- /dev/null
+++ b/include/asm-mips/mach-pnx8550/glb.h
@@ -0,0 +1,86 @@
+/*
+ *
+ * BRIEF MODULE DESCRIPTION
+ *   PNX8550 global definitions
+ *
+ * Author: source@mvista.com
+ *
+ *  This program is free software; you can distribute it and/or modify it
+ *  under the terms of the GNU General Public License (Version 2) as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ *  for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ */
+
+#ifndef __PNX8550_GLB_H
+#define __PNX8550_GLB_H
+
+#define PNX8550_GLB1_BASE	0xBBE63000
+#define PNX8550_GLB2_BASE	0xBBE4d000
+#define PNX8550_RESET_BASE      0xBBE60000
+
+/* PCI Inta Output Enable Registers */
+#define PNX8550_GLB2_ENAB_INTA_O	*(volatile unsigned long *)(PNX8550_GLB2_BASE + 0x050)
+
+/* Bit 1:Enable DAC Powerdown
+     0:DACs are enabled and are working normally
+     1:DACs are powerdown
+*/
+#define PNX8550_GLB_DAC_PD      0x2
+/*   Bit 0:Enable of PCI inta output
+     0 = Disable PCI inta output
+     1 = Enable PCI inta output
+*/
+#define PNX8550_GLB_ENABLE_INTA_O 0x1
+
+/* PCI Direct Mappings */
+#define PNX8550_PCIMEM	        0x12000000
+#define PNX8550_PCIMEM_SIZE	0x08000000
+#define PNX8550_PCIIO	        0x1c000000
+#define PNX8550_PCIIO_SIZE	0x02000000	/* 32M */
+
+#define PNX8550_PORT_BASE	KSEG1
+
+// GPIO def
+#define PNX8550_GPIO_BASE	0x1Be00000
+
+#define PNX8550_GPIO_DIRQ0	 (PNX8550_GPIO_BASE + 0x104500)
+#define PNX8550_GPIO_MC1         (PNX8550_GPIO_BASE + 0x104004)
+#define PNX8550_GPIO_MC_31_BIT   30
+#define PNX8550_GPIO_MC_30_BIT   28
+#define PNX8550_GPIO_MC_29_BIT   26
+#define PNX8550_GPIO_MC_28_BIT   24
+#define PNX8550_GPIO_MC_27_BIT   22
+#define PNX8550_GPIO_MC_26_BIT   20
+#define PNX8550_GPIO_MC_25_BIT   18
+#define PNX8550_GPIO_MC_24_BIT   16
+#define PNX8550_GPIO_MC_23_BIT   14
+#define PNX8550_GPIO_MC_22_BIT   12
+#define PNX8550_GPIO_MC_21_BIT   10
+#define PNX8550_GPIO_MC_20_BIT   8
+#define PNX8550_GPIO_MC_19_BIT   6
+#define PNX8550_GPIO_MC_18_BIT   4
+#define PNX8550_GPIO_MC_17_BIT   2
+#define PNX8550_GPIO_MC_16_BIT   0
+
+#define PNX8550_GPIO_MODE_PRIMOP    0x1
+#define PNX8550_GPIO_MODE_NO_OPENDR 0x2
+#define PNX8550_GPIO_MODE_OPENDR    0x3
+
+// RESET module
+#define PNX8550_RST_CTL             *(volatile unsigned long *)(PNX8550_RESET_BASE + 0x0)
+#define PNX8550_RST_CAUSE           *(volatile unsigned long *)(PNX8550_RESET_BASE + 0x4)
+#define PNX8550_RST_EN_WATCHDOG     *(volatile unsigned long *)(PNX8550_RESET_BASE + 0x8)
+
+#define PNX8550_RST_REL_MIPS_RST_N     0x8
+#define PNX8550_RST_DO_SW_RST          0x4
+#define PNX8550_RST_REL_SYS_RST_OUT    0x2
+#define PNX8550_RST_ASSERT_SYS_RST_OUT 0x1
+#endif
diff --git a/include/asm-mips/mach-pnx8550/int.h b/include/asm-mips/mach-pnx8550/int.h
new file mode 100644
index 00000000000..0e0668b524f
--- /dev/null
+++ b/include/asm-mips/mach-pnx8550/int.h
@@ -0,0 +1,140 @@
+/*
+ *
+ * BRIEF MODULE DESCRIPTION
+ *   Interrupt specific definitions
+ *
+ * Author: source@mvista.com
+ *
+ *  This program is free software; you can distribute it and/or modify it
+ *  under the terms of the GNU General Public License (Version 2) as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ *  for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ */
+
+#ifndef __PNX8550_INT_H
+#define __PNX8550_INT_H
+
+#define PNX8550_GIC_BASE	0xBBE3E000
+
+#define PNX8550_GIC_PRIMASK_0	*(volatile unsigned long *)(PNX8550_GIC_BASE + 0x000)
+#define PNX8550_GIC_PRIMASK_1	*(volatile unsigned long *)(PNX8550_GIC_BASE + 0x004)
+#define PNX8550_GIC_VECTOR_0	*(volatile unsigned long *)(PNX8550_GIC_BASE + 0x100)
+#define PNX8550_GIC_VECTOR_1	*(volatile unsigned long *)(PNX8550_GIC_BASE + 0x104)
+#define PNX8550_GIC_PEND_1_31	*(volatile unsigned long *)(PNX8550_GIC_BASE + 0x200)
+#define PNX8550_GIC_PEND_32_63	*(volatile unsigned long *)(PNX8550_GIC_BASE + 0x204)
+#define PNX8550_GIC_PEND_64_70	*(volatile unsigned long *)(PNX8550_GIC_BASE + 0x208)
+#define PNX8550_GIC_FEATURES	*(volatile unsigned long *)(PNX8550_GIC_BASE + 0x300)
+#define PNX8550_GIC_REQ(x)	*(volatile unsigned long *)(PNX8550_GIC_BASE + 0x400 + (x)*4)
+#define PNX8550_GIC_MOD_ID	*(volatile unsigned long *)(PNX8550_GIC_BASE + 0xFFC)
+
+// cp0 is two software + six hw exceptions
+#define PNX8550_INT_CP0_TOTINT	8
+#define PNX8550_INT_CP0_MIN	0
+#define PNX8550_INT_CP0_MAX	(PNX8550_INT_CP0_MIN + PNX8550_INT_CP0_TOTINT - 1)
+
+#define MIPS_CPU_GIC_IRQ        2
+#define MIPS_CPU_TIMER_IRQ      7
+
+// GIC are 71 exceptions connected to cp0's first hardware exception
+#define PNX8550_INT_GIC_TOTINT	71
+#define PNX8550_INT_GIC_MIN	(PNX8550_INT_CP0_MAX+1)
+#define PNX8550_INT_GIC_MAX	(PNX8550_INT_GIC_MIN + PNX8550_INT_GIC_TOTINT - 1)
+
+#define PNX8550_INT_UNDEF              (PNX8550_INT_GIC_MIN+0)
+#define PNX8550_INT_IPC_TARGET0_MIPS   (PNX8550_INT_GIC_MIN+1)
+#define PNX8550_INT_IPC_TARGET1_TM32_1 (PNX8550_INT_GIC_MIN+2)
+#define PNX8550_INT_IPC_TARGET1_TM32_2 (PNX8550_INT_GIC_MIN+3)
+#define PNX8550_INT_RESERVED_4         (PNX8550_INT_GIC_MIN+4)
+#define PNX8550_INT_USB                (PNX8550_INT_GIC_MIN+5)
+#define PNX8550_INT_GPIO_EQ1           (PNX8550_INT_GIC_MIN+6)
+#define PNX8550_INT_GPIO_EQ2           (PNX8550_INT_GIC_MIN+7)
+#define PNX8550_INT_GPIO_EQ3           (PNX8550_INT_GIC_MIN+8)
+#define PNX8550_INT_GPIO_EQ4           (PNX8550_INT_GIC_MIN+9)
+
+#define PNX8550_INT_GPIO_EQ5           (PNX8550_INT_GIC_MIN+10)
+#define PNX8550_INT_GPIO_EQ6           (PNX8550_INT_GIC_MIN+11)
+#define PNX8550_INT_RESERVED_12        (PNX8550_INT_GIC_MIN+12)
+#define PNX8550_INT_QVCP1              (PNX8550_INT_GIC_MIN+13)
+#define PNX8550_INT_QVCP2              (PNX8550_INT_GIC_MIN+14)
+#define PNX8550_INT_I2C1               (PNX8550_INT_GIC_MIN+15)
+#define PNX8550_INT_I2C2               (PNX8550_INT_GIC_MIN+16)
+#define PNX8550_INT_ISO_UART1          (PNX8550_INT_GIC_MIN+17)
+#define PNX8550_INT_ISO_UART2          (PNX8550_INT_GIC_MIN+18)
+#define PNX8550_INT_UART1              (PNX8550_INT_GIC_MIN+19)
+
+#define PNX8550_INT_UART2              (PNX8550_INT_GIC_MIN+20)
+#define PNX8550_INT_QNTR               (PNX8550_INT_GIC_MIN+21)
+#define PNX8550_INT_RESERVED22         (PNX8550_INT_GIC_MIN+22)
+#define PNX8550_INT_T_DSC              (PNX8550_INT_GIC_MIN+23)
+#define PNX8550_INT_M_DSC              (PNX8550_INT_GIC_MIN+24)
+#define PNX8550_INT_RESERVED25         (PNX8550_INT_GIC_MIN+25)
+#define PNX8550_INT_2D_DRAW_ENG        (PNX8550_INT_GIC_MIN+26)
+#define PNX8550_INT_MEM_BASED_SCALAR1  (PNX8550_INT_GIC_MIN+27)
+#define PNX8550_INT_VIDEO_MPEG         (PNX8550_INT_GIC_MIN+28)
+#define PNX8550_INT_VIDEO_INPUT_P1     (PNX8550_INT_GIC_MIN+29)
+
+#define PNX8550_INT_VIDEO_INPUT_P2     (PNX8550_INT_GIC_MIN+30)
+#define PNX8550_INT_SPDI1              (PNX8550_INT_GIC_MIN+31)
+#define PNX8550_INT_SPDO               (PNX8550_INT_GIC_MIN+32)
+#define PNX8550_INT_AUDIO_INPUT1       (PNX8550_INT_GIC_MIN+33)
+#define PNX8550_INT_AUDIO_OUTPUT1      (PNX8550_INT_GIC_MIN+34)
+#define PNX8550_INT_AUDIO_INPUT2       (PNX8550_INT_GIC_MIN+35)
+#define PNX8550_INT_AUDIO_OUTPUT2      (PNX8550_INT_GIC_MIN+36)
+#define PNX8550_INT_MEMBASED_SCALAR2   (PNX8550_INT_GIC_MIN+37)
+#define PNX8550_INT_VPK                (PNX8550_INT_GIC_MIN+38)
+#define PNX8550_INT_MPEG1_MIPS         (PNX8550_INT_GIC_MIN+39)
+
+#define PNX8550_INT_MPEG1_TM           (PNX8550_INT_GIC_MIN+40)
+#define PNX8550_INT_MPEG2_MIPS         (PNX8550_INT_GIC_MIN+41)
+#define PNX8550_INT_MPEG2_TM           (PNX8550_INT_GIC_MIN+42)
+#define PNX8550_INT_TS_DMA             (PNX8550_INT_GIC_MIN+43)
+#define PNX8550_INT_EDMA               (PNX8550_INT_GIC_MIN+44)
+#define PNX8550_INT_TM_DEBUG1          (PNX8550_INT_GIC_MIN+45)
+#define PNX8550_INT_TM_DEBUG2          (PNX8550_INT_GIC_MIN+46)
+#define PNX8550_INT_PCI_INTA           (PNX8550_INT_GIC_MIN+47)
+#define PNX8550_INT_CLOCK_MODULE       (PNX8550_INT_GIC_MIN+48)
+#define PNX8550_INT_PCI_XIO_INTA_PCI   (PNX8550_INT_GIC_MIN+49)
+
+#define PNX8550_INT_PCI_XIO_INTB_DMA   (PNX8550_INT_GIC_MIN+50)
+#define PNX8550_INT_PCI_XIO_INTC_GPPM  (PNX8550_INT_GIC_MIN+51)
+#define PNX8550_INT_PCI_XIO_INTD_GPXIO (PNX8550_INT_GIC_MIN+52)
+#define PNX8550_INT_DVD_CSS            (PNX8550_INT_GIC_MIN+53)
+#define PNX8550_INT_VLD                (PNX8550_INT_GIC_MIN+54)
+#define PNX8550_INT_GPIO_TSU_7_0       (PNX8550_INT_GIC_MIN+55)
+#define PNX8550_INT_GPIO_TSU_15_8      (PNX8550_INT_GIC_MIN+56)
+#define PNX8550_INT_GPIO_CTU_IR        (PNX8550_INT_GIC_MIN+57)
+#define PNX8550_INT_GPIO0              (PNX8550_INT_GIC_MIN+58)
+#define PNX8550_INT_GPIO1              (PNX8550_INT_GIC_MIN+59)
+
+#define PNX8550_INT_GPIO2              (PNX8550_INT_GIC_MIN+60)
+#define PNX8550_INT_GPIO3              (PNX8550_INT_GIC_MIN+61)
+#define PNX8550_INT_GPIO4              (PNX8550_INT_GIC_MIN+62)
+#define PNX8550_INT_GPIO5              (PNX8550_INT_GIC_MIN+63)
+#define PNX8550_INT_GPIO6              (PNX8550_INT_GIC_MIN+64)
+#define PNX8550_INT_GPIO7              (PNX8550_INT_GIC_MIN+65)
+#define PNX8550_INT_PMAN_SECURITY      (PNX8550_INT_GIC_MIN+66)
+#define PNX8550_INT_I2C3               (PNX8550_INT_GIC_MIN+67)
+#define PNX8550_INT_RESERVED_68        (PNX8550_INT_GIC_MIN+68)
+#define PNX8550_INT_SPDI2              (PNX8550_INT_GIC_MIN+69)
+
+#define PNX8550_INT_I2C4               (PNX8550_INT_GIC_MIN+70)
+
+// Timer are 3 exceptions connected to cp0's 7th hardware exception
+#define PNX8550_INT_TIMER_TOTINT       3
+#define PNX8550_INT_TIMER_MIN	       (PNX8550_INT_GIC_MAX+1)
+#define PNX8550_INT_TIMER_MAX          (PNX8550_INT_TIMER_MIN + PNX8550_INT_TIMER_TOTINT - 1)
+
+#define PNX8550_INT_TIMER1             (PNX8550_INT_TIMER_MIN+0)
+#define PNX8550_INT_TIMER2             (PNX8550_INT_TIMER_MIN+1)
+#define PNX8550_INT_TIMER3             (PNX8550_INT_TIMER_MIN+2)
+#define PNX8550_INT_WATCHDOG           PNX8550_INT_TIMER3
+
+#endif
diff --git a/include/asm-mips/mach-pnx8550/kernel-entry-init.h b/include/asm-mips/mach-pnx8550/kernel-entry-init.h
new file mode 100644
index 00000000000..57102fa9da5
--- /dev/null
+++ b/include/asm-mips/mach-pnx8550/kernel-entry-init.h
@@ -0,0 +1,262 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2005 Embedded Alley Solutions, Inc
+ */
+#ifndef __ASM_MACH_KERNEL_ENTRY_INIT_H
+#define __ASM_MACH_KERNEL_ENTRY_INIT_H
+
+#include <asm/cacheops.h>
+#include <asm/addrspace.h>
+
+#define CO_CONFIGPR_VALID  0x3F1F41FF    /* valid bits to write to ConfigPR */
+#define HAZARD_CP0 nop; nop; nop; nop; nop; nop; nop; nop; nop; nop; nop; nop;
+#define CACHE_OPC      0xBC000000  /* MIPS cache instruction opcode */
+#define ICACHE_LINE_SIZE        32      /* Instruction cache line size bytes */
+#define DCACHE_LINE_SIZE        32      /* Data cache line size in bytes */
+
+#define ICACHE_SET_COUNT        256     /* Instruction cache set count */
+#define DCACHE_SET_COUNT        128     /* Data cache set count */
+
+#define ICACHE_SET_SIZE         (ICACHE_SET_COUNT * ICACHE_LINE_SIZE)
+#define DCACHE_SET_SIZE         (DCACHE_SET_COUNT * DCACHE_LINE_SIZE)
+
+	.macro	kernel_entry_setup
+	.set	push
+	.set	noreorder
+	/*
+	 * PNX8550 entry point, when running a non compressed
+	 * kernel. When loading a zImage, the head.S code in
+	 * arch/mips/zboot/pnx8550 will init the caches and,
+	 * decompress the kernel, and branch to kernel_entry.
+		 */
+cache_begin:	li	t0, (1<<28)
+	mtc0	t0, CP0_STATUS /* cp0 usable */
+	HAZARD_CP0
+
+	mtc0 	zero, CP0_CAUSE
+	HAZARD_CP0
+
+
+	/* Set static virtual to phys address translation and TLB disabled */
+	mfc0 	t0, CP0_CONFIG, 7
+	HAZARD_CP0
+
+	and t0,~((1<<19) | (1<<20))     /* TLB/MAP cleared */
+	mtc0	t0, CP0_CONFIG, 7
+	HAZARD_CP0
+
+	/* CPU boots with kseg0 cache algo set to 0x2 -- uncached */
+
+	init_icache
+	nop
+	init_dcache
+	nop
+
+	cachePr4450ICReset
+	nop
+
+	cachePr4450DCReset
+	nop
+
+	/* read ConfigPR into t0 */
+	mfc0	t0, CP0_CONFIG, 7
+	HAZARD_CP0
+
+	/*  enable the TLB */
+	or      t0, (1<<19)
+
+	/* disable the ICACHE: at least 10x slower */
+	/* or      t0, (1<<26) */
+
+	/* disable the DCACHE; CONFIG_CPU_HAS_LLSC should not be set  */
+	/* or      t0, (1<<27) */
+
+	and	t0, CO_CONFIGPR_VALID
+
+	/* enable TLB. */
+	mtc0	t0, CP0_CONFIG, 7
+	HAZARD_CP0
+cache_end:
+	/* Setup CMEM_0 to MMIO address space, 2MB */
+	lui    t0, 0x1BE0
+	addi   t0, t0, 0x3
+	mtc0   $8, $22, 4
+	nop
+
+	/* Setup CMEM_1, 128MB */
+	lui    t0, 0x1000
+	addi   t0, t0, 0xf
+	mtc0   $8, $22, 5
+	nop
+
+
+	/* Setup CMEM_2, 32MB */
+	lui    t0, 0x1C00
+	addi   t0, t0, 0xb
+	mtc0   $8, $22, 6
+	nop
+
+	/* Setup CMEM_3, 0MB */
+	lui    t0, 0x0
+	addi   t0, t0, 0x0
+	mtc0   $8, $22, 7
+	nop
+
+	/* Enable cache */
+	mfc0	t0, CP0_CONFIG
+	HAZARD_CP0
+	and	t0, t0, 0xFFFFFFF8
+	or	t0, t0, 3
+	mtc0	t0, CP0_CONFIG
+	HAZARD_CP0
+	.set	pop
+	.endm
+
+	.macro	init_icache
+	.set	push
+	.set	noreorder
+
+	/* Get Cache Configuration */
+	mfc0	t3, CP0_CONFIG, 1
+	HAZARD_CP0
+
+	/* get cache Line size */
+
+	srl   t1, t3, 19   /* C0_CONFIGPR_IL_SHIFT */
+	andi  t1, t1, 0x7  /* C0_CONFIGPR_IL_MASK */
+	beq   t1, zero, pr4450_instr_cache_invalidated /* if zero instruction cache is absent */
+	nop
+	addiu t0, t1, 1
+	ori   t1, zero, 1
+	sllv  t1, t1, t0
+
+	/* get max cache Index */
+	srl   t2, t3, 22  /* C0_CONFIGPR_IS_SHIFT */
+	andi  t2, t2, 0x7 /* C0_CONFIGPR_IS_MASK */
+	addiu t0, t2, 6
+	ori   t2, zero, 1
+	sllv  t2, t2, t0
+
+	/* get max cache way */
+	srl   t3, t3, 16  /* C0_CONFIGPR_IA_SHIFT */
+	andi  t3, t3, 0x7 /* C0_CONFIGPR_IA_MASK */
+	addiu t3, t3, 1
+
+	/* total no of cache lines */
+	multu t2, t3             /* max index * max way */
+	mflo  t2
+	addiu t2, t2, -1
+
+	move  t0, zero
+pr4450_next_instruction_cache_set:
+	cache  Index_Invalidate_I, 0(t0)
+	addu  t0, t0, t1         /* add bytes in a line */
+	bne   t2, zero, pr4450_next_instruction_cache_set
+	addiu t2, t2, -1   /* reduce no of lines to invalidate by one */
+pr4450_instr_cache_invalidated:
+	.set	pop
+	.endm
+
+	.macro	init_dcache
+	.set	push
+	.set	noreorder
+	move t1, zero
+
+	/* Store Tag Information */
+	mtc0	zero, CP0_TAGLO, 0
+	HAZARD_CP0
+
+	mtc0	zero, CP0_TAGHI, 0
+	HAZARD_CP0
+
+	/* Cache size is 16384 = 512 lines x 32 bytes per line */
+	or       t2, zero, (128*4)-1  /* 512 lines  */
+	/* Invalidate all lines */
+2:
+	cache Index_Store_Tag_D, 0(t1)
+	addiu    t2, t2, -1
+	bne      t2, zero, 2b
+	addiu    t1, t1, 32        /* 32 bytes in a line */
+	.set pop
+	.endm
+
+	.macro	cachePr4450ICReset
+	.set	push
+	.set	noreorder
+
+	/* Save CP0 status reg on entry; */
+	/* disable interrupts during cache reset */
+	mfc0    t0, CP0_STATUS      /* T0 = interrupt status on entry */
+	HAZARD_CP0
+
+	mtc0    zero, CP0_STATUS   /* disable CPU interrupts */
+	HAZARD_CP0
+
+	or      t1, zero, zero              /* T1 = starting cache index (0) */
+	ori     t2, zero, (256 - 1) /* T2 = inst cache set cnt - 1 */
+
+	icache_invd_loop:
+	/* 9 == register t1 */
+	.word   (CACHE_OPC | (9 << 21) | (Index_Invalidate_I << 16) | \
+		(0 * ICACHE_SET_SIZE))  /* invalidate inst cache WAY0 */
+	.word   (CACHE_OPC | (9 << 21) | (Index_Invalidate_I << 16) | \
+		(1 * ICACHE_SET_SIZE))  /* invalidate inst cache WAY1 */
+
+	addiu   t1, t1, ICACHE_LINE_SIZE    /* T1 = next cache line index */
+	bne     t2, zero, icache_invd_loop /* T2 = 0 if all sets invalidated */
+	addiu   t2, t2, -1        /* decrement T2 set cnt (delay slot) */
+
+	/* Initialize the latches in the instruction cache tag */
+	/* that drive the way selection tri-state bus drivers, by doing a */
+	/* dummy load while the instruction cache is still disabled. */
+	/* TODO: Is this needed ? */
+	la      t1, KSEG0            /* T1 = cached memory base address */
+	lw      zero, 0x0000(t1)      /* (dummy read of first memory word) */
+
+	mtc0    t0, CP0_STATUS        /* restore interrupt status on entry */
+	HAZARD_CP0
+	.set	pop
+	.endm
+
+	.macro	cachePr4450DCReset
+	.set	push
+	.set	noreorder
+	mfc0    t0, CP0_STATUS           /* T0 = interrupt status on entry */
+	HAZARD_CP0
+	mtc0    zero, CP0_STATUS         /* disable CPU interrupts */
+	HAZARD_CP0
+
+	/* Writeback/invalidate entire data cache sets/ways/lines */
+	or      t1, zero, zero              /* T1 = starting cache index (0) */
+	ori     t2, zero, (DCACHE_SET_COUNT - 1) /* T2 = data cache set cnt - 1 */
+
+	dcache_wbinvd_loop:
+	/* 9 == register t1 */
+	.word   (CACHE_OPC | (9 << 21) | (Index_Writeback_Inv_D << 16) | \
+		(0 * DCACHE_SET_SIZE))  /* writeback/invalidate WAY0 */
+	.word   (CACHE_OPC | (9 << 21) | (Index_Writeback_Inv_D << 16) | \
+		(1 * DCACHE_SET_SIZE))  /* writeback/invalidate WAY1 */
+	.word   (CACHE_OPC | (9 << 21) | (Index_Writeback_Inv_D << 16) | \
+		(2 * DCACHE_SET_SIZE))  /* writeback/invalidate WAY2 */
+	.word   (CACHE_OPC | (9 << 21) | (Index_Writeback_Inv_D << 16) | \
+		(3 * DCACHE_SET_SIZE))  /* writeback/invalidate WAY3 */
+
+	addiu   t1, t1, DCACHE_LINE_SIZE  /* T1 = next data cache line index */
+	bne     t2, zero, dcache_wbinvd_loop /* T2 = 0 when wbinvd entire cache */
+	addiu   t2, t2, -1          /* decrement T2 set cnt (delay slot) */
+
+	/* Initialize the latches in the data cache tag that drive the way
+	selection tri-state bus drivers, by doing a dummy load while the
+	data cache is still in the disabled mode.  TODO: Is this needed ? */
+	la      t1, KSEG0            /* T1 = cached memory base address */
+	lw      zero, 0x0000(t1)      /* (dummy read of first memory word) */
+
+	mtc0    t0, CP0_STATUS       /* restore interrupt status on entry */
+	HAZARD_CP0
+	.set	pop
+	.endm
+
+#endif /* __ASM_MACH_KERNEL_ENTRY_INIT_H */
diff --git a/include/asm-mips/mach-pnx8550/nand.h b/include/asm-mips/mach-pnx8550/nand.h
new file mode 100644
index 00000000000..aefbc514ab0
--- /dev/null
+++ b/include/asm-mips/mach-pnx8550/nand.h
@@ -0,0 +1,121 @@
+#ifndef __PNX8550_NAND_H
+#define __PNX8550_NAND_H
+
+#define PNX8550_NAND_BASE_ADDR   0x10000000
+#define PNX8550_PCIXIO_BASE	 0xBBE40000
+
+#define PNX8550_DMA_EXT_ADDR     *(volatile unsigned long *)(PNX8550_PCIXIO_BASE + 0x800)
+#define PNX8550_DMA_INT_ADDR     *(volatile unsigned long *)(PNX8550_PCIXIO_BASE + 0x804)
+#define PNX8550_DMA_TRANS_SIZE   *(volatile unsigned long *)(PNX8550_PCIXIO_BASE + 0x808)
+#define PNX8550_DMA_CTRL         *(volatile unsigned long *)(PNX8550_PCIXIO_BASE + 0x80c)
+#define PNX8550_XIO_SEL0         *(volatile unsigned long *)(PNX8550_PCIXIO_BASE + 0x814)
+#define PNX8550_GPXIO_ADDR       *(volatile unsigned long *)(PNX8550_PCIXIO_BASE + 0x820)
+#define PNX8550_GPXIO_WR         *(volatile unsigned long *)(PNX8550_PCIXIO_BASE + 0x824)
+#define PNX8550_GPXIO_RD         *(volatile unsigned long *)(PNX8550_PCIXIO_BASE + 0x828)
+#define PNX8550_GPXIO_CTRL       *(volatile unsigned long *)(PNX8550_PCIXIO_BASE + 0x82C)
+#define PNX8550_XIO_FLASH_CTRL   *(volatile unsigned long *)(PNX8550_PCIXIO_BASE + 0x830)
+#define PNX8550_GPXIO_INT_STATUS *(volatile unsigned long *)(PNX8550_PCIXIO_BASE + 0xfb0)
+#define PNX8550_GPXIO_INT_ENABLE *(volatile unsigned long *)(PNX8550_PCIXIO_BASE + 0xfb4)
+#define PNX8550_GPXIO_INT_CLEAR  *(volatile unsigned long *)(PNX8550_PCIXIO_BASE + 0xfb8)
+#define PNX8550_DMA_INT_STATUS   *(volatile unsigned long *)(PNX8550_PCIXIO_BASE + 0xfd0)
+#define PNX8550_DMA_INT_ENABLE   *(volatile unsigned long *)(PNX8550_PCIXIO_BASE + 0xfd4)
+#define PNX8550_DMA_INT_CLEAR    *(volatile unsigned long *)(PNX8550_PCIXIO_BASE + 0xfd8)
+
+#define PNX8550_XIO_SEL0_EN_16BIT    0x00800000
+#define PNX8550_XIO_SEL0_USE_ACK     0x00400000
+#define PNX8550_XIO_SEL0_REN_HIGH    0x00100000
+#define PNX8550_XIO_SEL0_REN_LOW     0x00040000
+#define PNX8550_XIO_SEL0_WEN_HIGH    0x00010000
+#define PNX8550_XIO_SEL0_WEN_LOW     0x00004000
+#define PNX8550_XIO_SEL0_WAIT        0x00000200
+#define PNX8550_XIO_SEL0_OFFSET      0x00000020
+#define PNX8550_XIO_SEL0_TYPE_68360  0x00000000
+#define PNX8550_XIO_SEL0_TYPE_NOR    0x00000008
+#define PNX8550_XIO_SEL0_TYPE_NAND   0x00000010
+#define PNX8550_XIO_SEL0_TYPE_IDE    0x00000018
+#define PNX8550_XIO_SEL0_SIZE_8MB    0x00000000
+#define PNX8550_XIO_SEL0_SIZE_16MB   0x00000002
+#define PNX8550_XIO_SEL0_SIZE_32MB   0x00000004
+#define PNX8550_XIO_SEL0_SIZE_64MB   0x00000006
+#define PNX8550_XIO_SEL0_ENAB        0x00000001
+
+#define PNX8550_SEL0_DEFAULT ((PNX8550_XIO_SEL0_EN_16BIT)  | \
+                              (PNX8550_XIO_SEL0_REN_HIGH*0)| \
+	                      (PNX8550_XIO_SEL0_REN_LOW*2) | \
+	                      (PNX8550_XIO_SEL0_WEN_HIGH*0)| \
+                              (PNX8550_XIO_SEL0_WEN_LOW*2) | \
+	                      (PNX8550_XIO_SEL0_WAIT*4)    | \
+			      (PNX8550_XIO_SEL0_OFFSET*0)  | \
+			      (PNX8550_XIO_SEL0_TYPE_NAND) | \
+			      (PNX8550_XIO_SEL0_SIZE_32MB) | \
+			      (PNX8550_XIO_SEL0_ENAB))
+
+#define PNX8550_GPXIO_PENDING        0x00000200
+#define PNX8550_GPXIO_DONE           0x00000100
+#define PNX8550_GPXIO_CLR_DONE       0x00000080
+#define PNX8550_GPXIO_INIT           0x00000040
+#define PNX8550_GPXIO_READ_CMD       0x00000010
+#define PNX8550_GPXIO_BEN            0x0000000F
+
+#define PNX8550_XIO_FLASH_64MB       0x00200000
+#define PNX8550_XIO_FLASH_INC_DATA   0x00100000
+#define PNX8550_XIO_FLASH_CMD_PH     0x000C0000
+#define PNX8550_XIO_FLASH_CMD_PH2    0x00080000
+#define PNX8550_XIO_FLASH_CMD_PH1    0x00040000
+#define PNX8550_XIO_FLASH_CMD_PH0    0x00000000
+#define PNX8550_XIO_FLASH_ADR_PH     0x00030000
+#define PNX8550_XIO_FLASH_ADR_PH3    0x00030000
+#define PNX8550_XIO_FLASH_ADR_PH2    0x00020000
+#define PNX8550_XIO_FLASH_ADR_PH1    0x00010000
+#define PNX8550_XIO_FLASH_ADR_PH0    0x00000000
+#define PNX8550_XIO_FLASH_CMD_B(x)   ((x<<8) & 0x0000FF00)
+#define PNX8550_XIO_FLASH_CMD_A(x)   (x & 0x000000FF)
+
+#define PNX8550_XIO_INT_ACK          0x00004000
+#define PNX8550_XIO_INT_COMPL        0x00002000
+#define PNX8550_XIO_INT_NONSUP       0x00000200
+#define PNX8550_XIO_INT_ABORT        0x00000004
+
+#define PNX8550_DMA_CTRL_SINGLE_DATA 0x00000400
+#define PNX8550_DMA_CTRL_SND2XIO     0x00000200
+#define PNX8550_DMA_CTRL_FIX_ADDR    0x00000100
+#define PNX8550_DMA_CTRL_BURST_8     0x00000000
+#define PNX8550_DMA_CTRL_BURST_16    0x00000020
+#define PNX8550_DMA_CTRL_BURST_32    0x00000040
+#define PNX8550_DMA_CTRL_BURST_64    0x00000060
+#define PNX8550_DMA_CTRL_BURST_128   0x00000080
+#define PNX8550_DMA_CTRL_BURST_256   0x000000A0
+#define PNX8550_DMA_CTRL_BURST_512   0x000000C0
+#define PNX8550_DMA_CTRL_BURST_NORES 0x000000E0
+#define PNX8550_DMA_CTRL_INIT_DMA    0x00000010
+#define PNX8550_DMA_CTRL_CMD_TYPE    0x0000000F
+
+/* see PCI system arch, page 100 for the full list: */
+#define PNX8550_DMA_CTRL_PCI_CMD_READ    0x00000006
+#define PNX8550_DMA_CTRL_PCI_CMD_WRITE   0x00000007
+
+#define PNX8550_DMA_INT_STAT_ACK_DONE	(1<<14)
+#define PNX8550_DMA_INT_STAT_DMA_DONE	(1<<12)
+#define PNX8550_DMA_INT_STAT_DMA_ERR	(1<<9)
+#define PNX8550_DMA_INT_STAT_PERR5	(1<<5)
+#define PNX8550_DMA_INT_STAT_PERR4	(1<<4)
+#define PNX8550_DMA_INT_STAT_M_ABORT	(1<<2)
+#define PNX8550_DMA_INT_STAT_T_ABORT	(1<<1)
+
+#define PNX8550_DMA_INT_EN_ACK_DONE	(1<<14)
+#define PNX8550_DMA_INT_EN_DMA_DONE	(1<<12)
+#define PNX8550_DMA_INT_EN_DMA_ERR	(1<<9)
+#define PNX8550_DMA_INT_EN_PERR5	(1<<5)
+#define PNX8550_DMA_INT_EN_PERR4	(1<<4)
+#define PNX8550_DMA_INT_EN_M_ABORT	(1<<2)
+#define PNX8550_DMA_INT_EN_T_ABORT	(1<<1)
+
+#define PNX8550_DMA_INT_CLR_ACK_DONE	(1<<14)
+#define PNX8550_DMA_INT_CLR_DMA_DONE	(1<<12)
+#define PNX8550_DMA_INT_CLR_DMA_ERR	(1<<9)
+#define PNX8550_DMA_INT_CLR_PERR5	(1<<5)
+#define PNX8550_DMA_INT_CLR_PERR4	(1<<4)
+#define PNX8550_DMA_INT_CLR_M_ABORT	(1<<2)
+#define PNX8550_DMA_INT_CLR_T_ABORT	(1<<1)
+
+#endif
diff --git a/include/asm-mips/mach-pnx8550/pci.h b/include/asm-mips/mach-pnx8550/pci.h
new file mode 100644
index 00000000000..b921508d701
--- /dev/null
+++ b/include/asm-mips/mach-pnx8550/pci.h
@@ -0,0 +1,185 @@
+/*
+ *
+ * BRIEF MODULE DESCRIPTION
+ * PCI specific definitions
+ *
+ * Author: source@mvista.com
+ *
+ *  This program is free software; you can distribute it and/or modify it
+ *  under the terms of the GNU General Public License (Version 2) as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ *  for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ */
+
+#ifndef __PNX8550_PCI_H
+#define __PNX8550_PCI_H
+
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+
+#define PCI_ACCESS_READ  0
+#define PCI_ACCESS_WRITE 1
+
+#define PCI_CMD_IOR                     0x20
+#define PCI_CMD_IOW                     0x30
+#define PCI_CMD_CONFIG_READ             0xa0
+#define PCI_CMD_CONFIG_WRITE            0xb0
+
+#define PCI_IO_TIMEOUT                  1000
+#define PCI_IO_RETRY			5
+/* Timeout for IO and CFG accesses.
+   This is in 1/1024 th of a jiffie(=10ms)
+   i.e. approx 10us */
+#define PCI_IO_JIFFIES_TIMEOUT          40
+#define PCI_IO_JIFFIES_SHIFT            10
+
+#define PCI_BYTE_ENABLE_MASK		0x0000000f
+#define PCI_CFG_BUS_SHIFT               16
+#define PCI_CFG_FUNC_SHIFT              8
+#define PCI_CFG_REG_SHIFT               2
+
+#define PCI_BASE                  0x1be00000
+#define PCI_SETUP                 0x00040010
+#define PCI_DIS_REQGNT           (1<<30)
+#define PCI_DIS_REQGNTA          (1<<29)
+#define PCI_DIS_REQGNTB          (1<<28)
+#define PCI_D2_SUPPORT           (1<<27)
+#define PCI_D1_SUPPORT           (1<<26)
+#define PCI_EN_TA                (1<<24)
+#define PCI_EN_PCI2MMI           (1<<23)
+#define PCI_EN_XIO               (1<<22)
+#define PCI_BASE18_PREF          (1<<21)
+#define SIZE_16M                 0x3
+#define SIZE_32M                 0x4
+#define SIZE_64M                 0x5
+#define SIZE_128M                0x6
+#define PCI_SETUP_BASE18_SIZE(X) (X<<18)
+#define PCI_SETUP_BASE18_EN      (1<<17)
+#define PCI_SETUP_BASE14_PREF    (1<<16)
+#define PCI_SETUP_BASE14_SIZE(X) (X<<12)
+#define PCI_SETUP_BASE14_EN      (1<<11)
+#define PCI_SETUP_BASE10_PREF    (1<<10)
+#define PCI_SETUP_BASE10_SIZE(X) (X<<7)
+#define PCI_SETUP_CFGMANAGE_EN   (1<<1)
+#define PCI_SETUP_PCIARB_EN      (1<<0)
+
+#define PCI_CTRL                  0x040014
+#define PCI_SWPB_DCS_PCI         (1<<16)
+#define PCI_SWPB_PCI_PCI         (1<<15)
+#define PCI_SWPB_PCI_DCS         (1<<14)
+#define PCI_REG_WR_POST          (1<<13)
+#define PCI_XIO_WR_POST          (1<<12)
+#define PCI_PCI2_WR_POST         (1<<13)
+#define PCI_PCI1_WR_POST         (1<<12)
+#define PCI_SERR_SEEN            (1<<11)
+#define PCI_B10_SPEC_RD          (1<<6)
+#define PCI_B14_SPEC_RD          (1<<5)
+#define PCI_B18_SPEC_RD          (1<<4)
+#define PCI_B10_NOSUBWORD        (1<<3)
+#define PCI_B14_NOSUBWORD        (1<<2)
+#define PCI_B18_NOSUBWORD        (1<<1)
+#define PCI_RETRY_TMREN          (1<<0)
+
+#define PCI_BASE1_LO              0x040018
+#define PCI_BASE1_HI              0x04001C
+#define PCI_BASE2_LO              0x040020
+#define PCI_BASE2_HI              0x040024
+#define PCI_RDLIFETIM             0x040028
+#define PCI_GPPM_ADDR             0x04002C
+#define PCI_GPPM_WDAT             0x040030
+#define PCI_GPPM_RDAT             0x040034
+#define PCI_GPPM_CTRL             0x040038
+#define GPPM_DONE                (1<<10)
+#define INIT_PCI_CYCLE           (1<<9)
+#define GPPM_CMD(X)              (((X)&0xf)<<4)
+#define GPPM_BYTEEN(X)           ((X)&0xf)
+#define PCI_UNLOCKREG             0x04003C
+#define UNLOCK_SSID(X)           (((X)&0xff)<<8)
+#define UNLOCK_SETUP(X)          (((X)&0xff)<<0)
+#define UNLOCK_MAGIC             0xCA
+#define PCI_DEV_VEND_ID           0x040040
+#define DEVICE_ID(X)             (((X)>>16)&0xffff)
+#define VENDOR_ID(X)             (((X)&0xffff))
+#define PCI_CFG_CMDSTAT           0x040044
+#define PCI_CFG_STATUS(X)            (((X)>>16)&0xffff)
+#define PCI_CFG_COMMAND(X)           ((X)&0xffff)
+#define PCI_CLASS_REV             0x040048
+#define PCI_CLASSCODE(X)         (((X)>>8)&0xffffff)
+#define PCI_REVID(X)             ((X)&0xff)
+#define PCI_LAT_TMR     0x04004c
+#define PCI_BASE10      0x040050
+#define PCI_BASE14      0x040054
+#define PCI_BASE18      0x040058
+#define PCI_SUBSYS_ID   0x04006c
+#define PCI_CAP_PTR     0x040074
+#define PCI_CFG_MISC    0x04007c
+#define PCI_PMC         0x040080
+#define PCI_PWR_STATE   0x040084
+#define PCI_IO          0x040088
+#define PCI_SLVTUNING   0x04008C
+#define PCI_DMATUNING   0x040090
+#define PCI_DMAEADDR    0x040800
+#define PCI_DMAIADDR    0x040804
+#define PCI_DMALEN      0x040808
+#define PCI_DMACTRL     0x04080C
+#define PCI_XIOCTRL     0x040810
+#define PCI_SEL0PROF    0x040814
+#define PCI_SEL1PROF    0x040818
+#define PCI_SEL2PROF    0x04081C
+#define PCI_GPXIOADDR   0x040820
+#define PCI_NANDCTRLS   0x400830
+#define PCI_SEL3PROF    0x040834
+#define PCI_SEL4PROF    0x040838
+#define PCI_GPXIO_STAT  0x040FB0
+#define PCI_GPXIO_IMASK 0x040FB4
+#define PCI_GPXIO_ICLR  0x040FB8
+#define PCI_GPXIO_ISET  0x040FBC
+#define PCI_GPPM_STATUS 0x040FC0
+#define GPPM_DONE      (1<<10)
+#define GPPM_ERR       (1<<9)
+#define GPPM_MPAR_ERR  (1<<8)
+#define GPPM_PAR_ERR   (1<<7)
+#define GPPM_R_MABORT  (1<<2)
+#define GPPM_R_TABORT  (1<<1)
+#define PCI_GPPM_IMASK  0x040FC4
+#define PCI_GPPM_ICLR   0x040FC8
+#define PCI_GPPM_ISET   0x040FCC
+#define PCI_DMA_STATUS  0x040FD0
+#define PCI_DMA_IMASK   0x040FD4
+#define PCI_DMA_ICLR    0x040FD8
+#define PCI_DMA_ISET    0x040FDC
+#define PCI_ISTATUS     0x040FE0
+#define PCI_IMASK       0x040FE4
+#define PCI_ICLR        0x040FE8
+#define PCI_ISET        0x040FEC
+#define PCI_MOD_ID      0x040FFC
+
+/*
+ *  PCI configuration cycle AD bus definition
+ */
+/* Type 0 */
+#define PCI_CFG_TYPE0_REG_SHF           0
+#define PCI_CFG_TYPE0_FUNC_SHF          8
+
+/* Type 1 */
+#define PCI_CFG_TYPE1_REG_SHF           0
+#define PCI_CFG_TYPE1_FUNC_SHF          8
+#define PCI_CFG_TYPE1_DEV_SHF           11
+#define PCI_CFG_TYPE1_BUS_SHF           16
+
+/*
+ *  Ethernet device DP83816 definition
+ */
+#define DP83816_IRQ_ETHER               66
+
+#endif
diff --git a/include/asm-mips/mach-pnx8550/uart.h b/include/asm-mips/mach-pnx8550/uart.h
new file mode 100644
index 00000000000..e32b9a23d70
--- /dev/null
+++ b/include/asm-mips/mach-pnx8550/uart.h
@@ -0,0 +1,16 @@
+#ifndef __IP3106_UART_H
+#define __IP3106_UART_H
+
+#include <int.h>
+
+/* early macros for kgdb use. fixme: clean this up */
+
+#define UART_BASE		0xbbe4a000	/* PNX8550 */
+
+#define PNX8550_UART_PORT0	(UART_BASE)
+#define PNX8550_UART_PORT1	(UART_BASE + 0x1000)
+
+#define PNX8550_UART_INT(x)		(PNX8550_INT_GIC_MIN+19+x)
+#define IRQ_TO_UART(x)			(x-PNX8550_INT_GIC_MIN-19)
+
+#endif
diff --git a/include/asm-mips/mach-pnx8550/usb.h b/include/asm-mips/mach-pnx8550/usb.h
new file mode 100644
index 00000000000..483b7fc65d4
--- /dev/null
+++ b/include/asm-mips/mach-pnx8550/usb.h
@@ -0,0 +1,32 @@
+/*
+ *
+ * BRIEF MODULE DESCRIPTION
+ *  USB specific definitions
+ *
+ * Author: source@mvista.com
+ *
+ *  This program is free software; you can distribute it and/or modify it
+ *  under the terms of the GNU General Public License (Version 2) as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ *  for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ */
+
+#ifndef __PNX8550_USB_H
+#define __PNX8550_USB_H
+
+/*
+ * USB Host controller
+ */
+
+#define PNX8550_USB_OHCI_OP_BASE	0x1be48000
+#define PNX8550_USB_OHCI_OP_LEN	        0x1000
+
+#endif
diff --git a/include/asm-mips/mipsregs.h b/include/asm-mips/mipsregs.h
index a7a43ff8c5c..08aa231b4de 100644
--- a/include/asm-mips/mipsregs.h
+++ b/include/asm-mips/mipsregs.h
@@ -841,12 +841,24 @@ do {									\
 #define read_c0_count()		__read_32bit_c0_register($9, 0)
 #define write_c0_count(val)	__write_32bit_c0_register($9, 0, val)
 
+#define read_c0_count2()	__read_32bit_c0_register($9, 6) /* pnx8550 */
+#define write_c0_count2(val)	__write_32bit_c0_register($9, 6, val)
+
+#define read_c0_count3()	__read_32bit_c0_register($9, 7) /* pnx8550 */
+#define write_c0_count3(val)	__write_32bit_c0_register($9, 7, val)
+
 #define read_c0_entryhi()	__read_ulong_c0_register($10, 0)
 #define write_c0_entryhi(val)	__write_ulong_c0_register($10, 0, val)
 
 #define read_c0_compare()	__read_32bit_c0_register($11, 0)
 #define write_c0_compare(val)	__write_32bit_c0_register($11, 0, val)
 
+#define read_c0_compare2()	__read_32bit_c0_register($11, 6) /* pnx8550 */
+#define write_c0_compare2(val)	__write_32bit_c0_register($11, 6, val)
+
+#define read_c0_compare3()	__read_32bit_c0_register($11, 7) /* pnx8550 */
+#define write_c0_compare3(val)	__write_32bit_c0_register($11, 7, val)
+
 #define read_c0_status()	__read_32bit_c0_register($12, 0)
 #define write_c0_status(val)	__write_32bit_c0_register($12, 0, val)
 
diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h
index 27db8da43aa..2b0401b93f2 100644
--- a/include/linux/serial_core.h
+++ b/include/linux/serial_core.h
@@ -39,7 +39,8 @@
 #define PORT_RSA	13
 #define PORT_NS16550A	14
 #define PORT_XSCALE	15
-#define PORT_MAX_8250	15	/* max port ID */
+#define PORT_IP3106	16
+#define PORT_MAX_8250	16	/* max port ID */
 
 /*
  * ARM specific type numbers.  These are not currently guaranteed
diff --git a/include/linux/serial_ip3106.h b/include/linux/serial_ip3106.h
new file mode 100644
index 00000000000..f500ac602c5
--- /dev/null
+++ b/include/linux/serial_ip3106.h
@@ -0,0 +1,81 @@
+/*
+ * Embedded Alley Solutions, source@embeddedalley.com.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef _LINUX_SERIAL_IP3106_H
+#define _LINUX_SERIAL_IP3106_H
+
+#include <linux/serial_core.h>
+#include <linux/device.h>
+
+#define IP3106_NR_PORTS		2
+
+struct ip3106_port {
+	struct uart_port	port;
+	struct timer_list	timer;
+	unsigned int		old_status;
+};
+
+/* register offsets */
+#define IP3106_LCR		0
+#define IP3106_MCR		0x004
+#define IP3106_BAUD		0x008
+#define IP3106_CFG		0x00c
+#define IP3106_FIFO		0x028
+#define IP3106_ISTAT		0xfe0
+#define IP3106_IEN		0xfe4
+#define IP3106_ICLR		0xfe8
+#define IP3106_ISET		0xfec
+#define IP3106_PD		0xff4
+#define IP3106_MID		0xffc
+
+#define IP3106_UART_LCR_TXBREAK		(1<<30)
+#define IP3106_UART_LCR_PAREVN		0x10000000
+#define IP3106_UART_LCR_PAREN		0x08000000
+#define IP3106_UART_LCR_2STOPB		0x04000000
+#define IP3106_UART_LCR_8BIT		0x01000000
+#define IP3106_UART_LCR_TX_RST		0x00040000
+#define IP3106_UART_LCR_RX_RST		0x00020000
+#define IP3106_UART_LCR_RX_NEXT		0x00010000
+
+#define IP3106_UART_MCR_SCR		0xFF000000
+#define IP3106_UART_MCR_DCD		0x00800000
+#define IP3106_UART_MCR_CTS		0x00100000
+#define IP3106_UART_MCR_LOOP		0x00000010
+#define IP3106_UART_MCR_RTS		0x00000002
+#define IP3106_UART_MCR_DTR		0x00000001
+
+#define IP3106_UART_INT_TX		0x00000080
+#define IP3106_UART_INT_EMPTY		0x00000040
+#define IP3106_UART_INT_RCVTO		0x00000020
+#define IP3106_UART_INT_RX		0x00000010
+#define IP3106_UART_INT_RXOVRN		0x00000008
+#define IP3106_UART_INT_FRERR		0x00000004
+#define IP3106_UART_INT_BREAK		0x00000002
+#define IP3106_UART_INT_PARITY		0x00000001
+#define IP3106_UART_INT_ALLRX		0x0000003F
+#define IP3106_UART_INT_ALLTX		0x000000C0
+
+#define IP3106_UART_FIFO_TXFIFO		0x001F0000
+#define IP3106_UART_FIFO_TXFIFO_STA	(0x1f<<16)
+#define IP3106_UART_FIFO_RXBRK		0x00008000
+#define IP3106_UART_FIFO_RXFE		0x00004000
+#define IP3106_UART_FIFO_RXPAR		0x00002000
+#define IP3106_UART_FIFO_RXFIFO		0x00001F00
+#define IP3106_UART_FIFO_RBRTHR		0x000000FF
+
+#endif