[ARM] 3821/1: iop3xx: switch iop32x/iop33x over to shared pci code

Switch the iop32x and iop33x code over to the common PCI implementation,
and remove the (nearly identical) iop32x and iop33x PCI implementations.

Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

21 files changed, 30 insertions, 870 deletions

diff --git a/arch/arm/mach-iop32x/Makefile b/arch/arm/mach-iop32x/Makefile
index 94144f7efa6..7266224ab6d 100644
--- a/arch/arm/mach-iop32x/Makefile
+++ b/arch/arm/mach-iop32x/Makefile
@@ -2,7 +2,7 @@
 # Makefile for the linux kernel.
 #
 
-obj-y			:= common.o setup.o irq.o pci.o time.o
+obj-y			:= common.o setup.o irq.o time.o
 obj-m			:=
 obj-n			:=
 obj-			:=
diff --git a/arch/arm/mach-iop32x/common.c b/arch/arm/mach-iop32x/common.c
index 17e7d650fec..9a17a081327 100644
--- a/arch/arm/mach-iop32x/common.c
+++ b/arch/arm/mach-iop32x/common.c
@@ -16,12 +16,6 @@
 #include <asm/hardware.h>
 #include <asm/hardware/iop3xx.h>
 
-/*
- * Shared variables
- */
-unsigned long iop3xx_pcibios_min_io = 0;
-unsigned long iop3xx_pcibios_min_mem = 0;
-
 #ifdef CONFIG_ARCH_EP80219
 #include <linux/kernel.h>
 /*
diff --git a/arch/arm/mach-iop32x/iq31244-pci.c b/arch/arm/mach-iop32x/iq31244-pci.c
index e447c8103ec..605b7955374 100644
--- a/arch/arm/mach-iop32x/iq31244-pci.c
+++ b/arch/arm/mach-iop32x/iq31244-pci.c
@@ -67,51 +67,12 @@ iq31244_map_irq(struct pci_dev *dev, u8 idsel, u8 pin)
 	return PCI_IRQ_TABLE_LOOKUP(0, 7);
 }
 
-static int iq31244_setup(int nr, struct pci_sys_data *sys)
-{
-	struct resource *res;
-
-	if(nr != 0)
-		return 0;
-
-	res = kzalloc(sizeof(struct resource) * 2, GFP_KERNEL);
-	if (!res)
-		panic("PCI: unable to alloc resources");
-
-	res[0].start = IOP321_PCI_LOWER_IO_VA;
-	res[0].end   = IOP321_PCI_UPPER_IO_VA;
-	res[0].name  = "IQ31244 PCI I/O Space";
-	res[0].flags = IORESOURCE_IO;
-
-	res[1].start = IOP321_PCI_LOWER_MEM_PA;
-	res[1].end   = IOP321_PCI_UPPER_MEM_PA;
-	res[1].name  = "IQ31244 PCI Memory Space";
-	res[1].flags = IORESOURCE_MEM;
-
-	request_resource(&ioport_resource, &res[0]);
-	request_resource(&iomem_resource, &res[1]);
-
-	sys->mem_offset = IOP321_PCI_MEM_OFFSET;
-	sys->io_offset  = IOP321_PCI_IO_OFFSET;
-
-	sys->resource[0] = &res[0];
-	sys->resource[1] = &res[1];
-	sys->resource[2] = NULL;
-
-	return 1;
-}
-
-static void iq31244_preinit(void)
-{
-	iop321_init();
-}
-
 static struct hw_pci iq31244_pci __initdata = {
 	.swizzle	= pci_std_swizzle,
 	.nr_controllers = 1,
-	.setup		= iq31244_setup,
-	.scan		= iop321_scan_bus,
-	.preinit	= iq31244_preinit,
+	.setup		= iop3xx_pci_setup,
+	.scan		= iop3xx_pci_scan_bus,
+	.preinit	= iop3xx_pci_preinit,
 	.map_irq	= iq31244_map_irq
 };
 
diff --git a/arch/arm/mach-iop32x/iq80321-pci.c b/arch/arm/mach-iop32x/iq80321-pci.c
index 8767950e131..cedc37b968b 100644
--- a/arch/arm/mach-iop32x/iq80321-pci.c
+++ b/arch/arm/mach-iop32x/iq80321-pci.c
@@ -61,51 +61,12 @@ iq80321_map_irq(struct pci_dev *dev, u8 idsel, u8 pin)
 	return pci_irq_table[idsel%4][pin-1];
 }
 
-static int iq80321_setup(int nr, struct pci_sys_data *sys)
-{
-	struct resource *res;
-
-	if(nr != 0)
-		return 0;
-
-	res = kzalloc(sizeof(struct resource) * 2, GFP_KERNEL);
-	if (!res)
-		panic("PCI: unable to alloc resources");
-
-	res[0].start = IOP321_PCI_LOWER_IO_VA;
-	res[0].end   = IOP321_PCI_UPPER_IO_VA;
-	res[0].name  = "IQ80321 PCI I/O Space";
-	res[0].flags = IORESOURCE_IO;
-
-	res[1].start = IOP321_PCI_LOWER_MEM_PA;
-	res[1].end   = IOP321_PCI_UPPER_MEM_PA;
-	res[1].name  = "IQ80321 PCI Memory Space";
-	res[1].flags = IORESOURCE_MEM;
-
-	request_resource(&ioport_resource, &res[0]);
-	request_resource(&iomem_resource, &res[1]);
-
-	sys->mem_offset = IOP321_PCI_MEM_OFFSET;
-	sys->io_offset  = IOP321_PCI_IO_OFFSET;
-
-	sys->resource[0] = &res[0];
-	sys->resource[1] = &res[1];
-	sys->resource[2] = NULL;
-
-	return 1;
-}
-
-static void iq80321_preinit(void)
-{
-	iop321_init();
-}
-
 static struct hw_pci iq80321_pci __initdata = {
 	.swizzle	= pci_std_swizzle,
 	.nr_controllers = 1,
-	.setup		= iq80321_setup,
-	.scan		= iop321_scan_bus,
-	.preinit	= iq80321_preinit,
+	.setup		= iop3xx_pci_setup,
+	.scan		= iop3xx_pci_scan_bus,
+	.preinit	= iop3xx_pci_preinit,
 	.map_irq	= iq80321_map_irq
 };
 
diff --git a/arch/arm/mach-iop32x/irq.c b/arch/arm/mach-iop32x/irq.c
index c5f633d2d63..76f2d561dbc 100644
--- a/arch/arm/mach-iop32x/irq.c
+++ b/arch/arm/mach-iop32x/irq.c
@@ -84,7 +84,7 @@ void __init iop321_init_irq(void)
 	intstr_write(0);		// treat all as IRQ
 	if(machine_is_iq80321() ||
 	   machine_is_iq31244()) 	// all interrupts are inputs to chip
-		*IOP321_PCIIRSR = 0x0f;
+		*IOP3XX_PCIIRSR = 0x0f;
 
 	for(i = IOP321_IRQ_OFS; i < NR_IRQS; i++)
 	{
diff --git a/arch/arm/mach-iop32x/pci.c b/arch/arm/mach-iop32x/pci.c
deleted file mode 100644
index 1a7c683673f..00000000000
--- a/arch/arm/mach-iop32x/pci.c
+++ /dev/null
@@ -1,220 +0,0 @@
-/*
- * arch/arm/mach-iop32x/pci.c
- *
- * PCI support for the Intel IOP321 chipset
- *
- * Author: Rory Bolt <rorybolt@pacbell.net>
- * Copyright (C) 2002 Rory Bolt
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/slab.h>
-#include <linux/mm.h>
-#include <linux/init.h>
-#include <linux/ioport.h>
-
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/system.h>
-#include <asm/hardware.h>
-#include <asm/mach/pci.h>
-
-#include <asm/arch/iop321.h>
-
-// #define DEBUG
-
-#ifdef DEBUG
-#define  DBG(x...) printk(x)
-#else
-#define  DBG(x...) do { } while (0)
-#endif
-
-/*
- * This routine builds either a type0 or type1 configuration command.  If the
- * bus is on the 80321 then a type0 made, else a type1 is created.
- */
-static u32 iop321_cfg_address(struct pci_bus *bus, int devfn, int where)
-{
-	struct pci_sys_data *sys = bus->sysdata;
-	u32 addr;
-
-	if (sys->busnr == bus->number)
-		addr = 1 << (PCI_SLOT(devfn) + 16) | (PCI_SLOT(devfn) << 11);
-	else
-		addr = bus->number << 16 | PCI_SLOT(devfn) << 11 | 1;
-
-	addr |=	PCI_FUNC(devfn) << 8 | (where & ~3);
-
-	return addr;
-}
-
-/*
- * This routine checks the status of the last configuration cycle.  If an error
- * was detected it returns a 1, else it returns a 0.  The errors being checked
- * are parity, master abort, target abort (master and target).  These types of
- * errors occure during a config cycle where there is no device, like during
- * the discovery stage.
- */
-static int iop321_pci_status(void)
-{
-	unsigned int status;
-	int ret = 0;
-
-	/*
-	 * Check the status registers.
-	 */
-	status = *IOP321_ATUSR;
-	if (status & 0xf900)
-	{
-		DBG("\t\t\tPCI: P0 - status = 0x%08x\n", status);
-		*IOP321_ATUSR = status & 0xf900;
-		ret = 1;
-	}
-	status = *IOP321_ATUISR;
-	if (status & 0x679f)
-	{
-		DBG("\t\t\tPCI: P1 - status = 0x%08x\n", status);
-		*IOP321_ATUISR = status & 0x679f;
-		ret = 1;
-	}
-	return ret;
-}
-
-/*
- * Simply write the address register and read the configuration
- * data.  Note that the 4 nop's ensure that we are able to handle
- * a delayed abort (in theory.)
- */
-static inline u32 iop321_read(unsigned long addr)
-{
-	u32 val;
-
-	__asm__ __volatile__(
-		"str	%1, [%2]\n\t"
-		"ldr	%0, [%3]\n\t"
-		"nop\n\t"
-		"nop\n\t"
-		"nop\n\t"
-		"nop\n\t"
-		: "=r" (val)
-		: "r" (addr), "r" (IOP321_OCCAR), "r" (IOP321_OCCDR));
-
-	return val;
-}
-
-/*
- * The read routines must check the error status of the last configuration
- * cycle.  If there was an error, the routine returns all hex f's.
- */
-static int
-iop321_read_config(struct pci_bus *bus, unsigned int devfn, int where,
-		int size, u32 *value)
-{
-	unsigned long addr = iop321_cfg_address(bus, devfn, where);
-	u32 val = iop321_read(addr) >> ((where & 3) * 8);
-
-	if( iop321_pci_status() )
-		val = 0xffffffff;
-
-	*value = val;
-
-	return PCIBIOS_SUCCESSFUL;
-}
-
-static int
-iop321_write_config(struct pci_bus *bus, unsigned int devfn, int where,
-		int size, u32 value)
-{
-	unsigned long addr = iop321_cfg_address(bus, devfn, where);
-	u32 val;
-
-	if (size != 4) {
-		val = iop321_read(addr);
-		if (!iop321_pci_status() == 0)
-			return PCIBIOS_SUCCESSFUL;
-
-		where = (where & 3) * 8;
-
-		if (size == 1)
-			val &= ~(0xff << where);
-		else
-			val &= ~(0xffff << where);
-
-		*IOP321_OCCDR = val | value << where;
-	} else {
-		asm volatile(
-			"str	%1, [%2]\n\t"
-			"str	%0, [%3]\n\t"
-			"nop\n\t"
-			"nop\n\t"
-			"nop\n\t"
-			"nop\n\t"
-			:
-			: "r" (value), "r" (addr),
-			  "r" (IOP321_OCCAR), "r" (IOP321_OCCDR));
-	}
-
-	return PCIBIOS_SUCCESSFUL;
-}
-
-static struct pci_ops iop321_ops = {
-	.read	= iop321_read_config,
-	.write	= iop321_write_config,
-};
-
-/*
- * When a PCI device does not exist during config cycles, the 80200 gets a
- * bus error instead of returning 0xffffffff. This handler simply returns.
- */
-int
-iop321_pci_abort(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
-{
-	DBG("PCI abort: address = 0x%08lx fsr = 0x%03x PC = 0x%08lx LR = 0x%08lx\n",
-		addr, fsr, regs->ARM_pc, regs->ARM_lr);
-
-	/*
-	 * If it was an imprecise abort, then we need to correct the
-	 * return address to be _after_ the instruction.
-	 */
-	if (fsr & (1 << 10))
-		regs->ARM_pc += 4;
-
-	return 0;
-}
-
-/*
- * Scan an IOP321 PCI bus.  sys->bus defines which bus we scan.
- */
-struct pci_bus *iop321_scan_bus(int nr, struct pci_sys_data *sys)
-{
-	return pci_scan_bus(sys->busnr, &iop321_ops, sys);
-}
-
-void iop321_init(void)
-{
-	DBG("PCI:  Intel 80321 PCI init code.\n");
-	DBG("ATU: IOP321_ATUCMD=0x%04x\n", *IOP321_ATUCMD);
-	DBG("ATU: IOP321_OMWTVR0=0x%04x, IOP321_OIOWTVR=0x%04x\n",
-			*IOP321_OMWTVR0,
-			*IOP321_OIOWTVR);
-	DBG("ATU: IOP321_ATUCR=0x%08x\n", *IOP321_ATUCR);
-	DBG("ATU: IOP321_IABAR0=0x%08x IOP321_IALR0=0x%08x IOP321_IATVR0=%08x\n",
-			*IOP321_IABAR0, *IOP321_IALR0, *IOP321_IATVR0);
-	DBG("ATU: IOP321_OMWTVR0=0x%08x\n", *IOP321_OMWTVR0);
-	DBG("ATU: IOP321_IABAR1=0x%08x IOP321_IALR1=0x%08x\n",
-			*IOP321_IABAR1, *IOP321_IALR1);
-	DBG("ATU: IOP321_ERBAR=0x%08x IOP321_ERLR=0x%08x IOP321_ERTVR=%08x\n",
-			*IOP321_ERBAR, *IOP321_ERLR, *IOP321_ERTVR);
-	DBG("ATU: IOP321_IABAR2=0x%08x IOP321_IALR2=0x%08x IOP321_IATVR2=%08x\n",
-			*IOP321_IABAR2, *IOP321_IALR2, *IOP321_IATVR2);
-	DBG("ATU: IOP321_IABAR3=0x%08x IOP321_IALR3=0x%08x IOP321_IATVR3=%08x\n",
-			*IOP321_IABAR3, *IOP321_IALR3, *IOP321_IATVR3);
-
-	hook_fault_code(16+6, iop321_pci_abort, SIGBUS, "imprecise external abort");
-}
-
diff --git a/arch/arm/mach-iop33x/Makefile b/arch/arm/mach-iop33x/Makefile
index 7865923b0a6..6c74f13b113 100644
--- a/arch/arm/mach-iop33x/Makefile
+++ b/arch/arm/mach-iop33x/Makefile
@@ -2,7 +2,7 @@
 # Makefile for the linux kernel.
 #
 
-obj-y			:= common.o setup.o irq.o pci.o time.o
+obj-y			:= setup.o irq.o time.o
 obj-m			:=
 obj-n			:=
 obj-			:=
diff --git a/arch/arm/mach-iop33x/common.c b/arch/arm/mach-iop33x/common.c
deleted file mode 100644
index dd75f2b8e74..00000000000
--- a/arch/arm/mach-iop33x/common.c
+++ /dev/null
@@ -1,22 +0,0 @@
-/*
- * arch/arm/mach-iop33x/common.c
- *
- * Common routines shared across all IOP3xx implementations
- *
- * Author: Deepak Saxena <dsaxena@mvista.com>
- *
- * Copyright 2003 (c) MontaVista, Software, Inc.
- *
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/delay.h>
-#include <asm/hardware.h>
-
-/*
- * Shared variables
- */
-unsigned long iop3xx_pcibios_min_io = 0;
-unsigned long iop3xx_pcibios_min_mem = 0;
diff --git a/arch/arm/mach-iop33x/iq80331-pci.c b/arch/arm/mach-iop33x/iq80331-pci.c
index 71adb12a942..8b0bed5e2f9 100644
--- a/arch/arm/mach-iop33x/iq80331-pci.c
+++ b/arch/arm/mach-iop33x/iq80331-pci.c
@@ -57,51 +57,12 @@ iq80331_map_irq(struct pci_dev *dev, u8 idsel, u8 pin)
 	return PCI_IRQ_TABLE_LOOKUP(1, 7);
 }
 
-static int iq80331_setup(int nr, struct pci_sys_data *sys)
-{
-	struct resource *res;
-
-	if(nr != 0)
-		return 0;
-
-	res = kzalloc(sizeof(struct resource) * 2, GFP_KERNEL);
-	if (!res)
-		panic("PCI: unable to alloc resources");
-
-	res[0].start = IOP331_PCI_LOWER_IO_VA;
-	res[0].end   = IOP331_PCI_UPPER_IO_VA;
-	res[0].name  = "IQ80331 PCI I/O Space";
-	res[0].flags = IORESOURCE_IO;
-
-	res[1].start = IOP331_PCI_LOWER_MEM_PA;
-	res[1].end   = IOP331_PCI_UPPER_MEM_PA;
-	res[1].name  = "IQ80331 PCI Memory Space";
-	res[1].flags = IORESOURCE_MEM;
-
-	request_resource(&ioport_resource, &res[0]);
-	request_resource(&iomem_resource, &res[1]);
-
-	sys->mem_offset = IOP331_PCI_MEM_OFFSET;
-	sys->io_offset  = IOP331_PCI_IO_OFFSET;
-
-	sys->resource[0] = &res[0];
-	sys->resource[1] = &res[1];
-	sys->resource[2] = NULL;
-
-	return 1;
-}
-
-static void iq80331_preinit(void)
-{
-	iop331_init();
-}
-
 static struct hw_pci iq80331_pci __initdata = {
 	.swizzle	= pci_std_swizzle,
 	.nr_controllers = 1,
-	.setup		= iq80331_setup,
-	.scan		= iop331_scan_bus,
-	.preinit	= iq80331_preinit,
+	.setup		= iop3xx_pci_setup,
+	.scan		= iop3xx_pci_scan_bus,
+	.preinit	= iop3xx_pci_preinit,
 	.map_irq	= iq80331_map_irq
 };
 
diff --git a/arch/arm/mach-iop33x/iq80332-pci.c b/arch/arm/mach-iop33x/iq80332-pci.c
index f3010f85b1a..0de8aa748dd 100644
--- a/arch/arm/mach-iop33x/iq80332-pci.c
+++ b/arch/arm/mach-iop33x/iq80332-pci.c
@@ -63,51 +63,12 @@ iq80332_map_irq(struct pci_dev *dev, u8 idsel, u8 pin)
 	return PCI_IRQ_TABLE_LOOKUP(1, 7);
 }
 
-static int iq80332_setup(int nr, struct pci_sys_data *sys)
-{
-	struct resource *res;
-
-	if(nr != 0)
-		return 0;
-
-	res = kzalloc(sizeof(struct resource) * 2, GFP_KERNEL);
-	if (!res)
-		panic("PCI: unable to alloc resources");
-
-	res[0].start = IOP331_PCI_LOWER_IO_VA;
-	res[0].end   = IOP331_PCI_UPPER_IO_VA;
-	res[0].name  = "IQ80332 PCI I/O Space";
-	res[0].flags = IORESOURCE_IO;
-
-	res[1].start = IOP331_PCI_LOWER_MEM_PA;
-	res[1].end   = IOP331_PCI_UPPER_MEM_PA;
-	res[1].name  = "IQ80332 PCI Memory Space";
-	res[1].flags = IORESOURCE_MEM;
-
-	request_resource(&ioport_resource, &res[0]);
-	request_resource(&iomem_resource, &res[1]);
-
-	sys->mem_offset = IOP331_PCI_MEM_OFFSET;
-	sys->io_offset  = IOP331_PCI_IO_OFFSET;
-
-	sys->resource[0] = &res[0];
-	sys->resource[1] = &res[1];
-	sys->resource[2] = NULL;
-
-	return 1;
-}
-
-static void iq80332_preinit(void)
-{
-	iop331_init();
-}
-
 static struct hw_pci iq80332_pci __initdata = {
 	.swizzle	= pci_std_swizzle,
 	.nr_controllers = 1,
-	.setup		= iq80332_setup,
-	.scan		= iop331_scan_bus,
-	.preinit	= iq80332_preinit,
+	.setup		= iop3xx_pci_setup,
+	.scan		= iop3xx_pci_scan_bus,
+	.preinit	= iop3xx_pci_preinit,
 	.map_irq	= iq80332_map_irq
 };
 
diff --git a/arch/arm/mach-iop33x/irq.c b/arch/arm/mach-iop33x/irq.c
index 029fa78876a..bcffc33a5be 100644
--- a/arch/arm/mach-iop33x/irq.c
+++ b/arch/arm/mach-iop33x/irq.c
@@ -117,7 +117,7 @@ void __init iop331_init_irq(void)
 	intstr_write0(0);		// treat all as IRQ
     	intstr_write1(0);
 	if(machine_is_iq80331()) 	// all interrupts are inputs to chip
-		*IOP331_PCIIRSR = 0x0f;
+		*IOP3XX_PCIIRSR = 0x0f;
 
 	for(i = IOP331_IRQ_OFS; i < NR_IRQS; i++)
 	{
diff --git a/arch/arm/mach-iop33x/pci.c b/arch/arm/mach-iop33x/pci.c
deleted file mode 100644
index bf6aba91b47..00000000000
--- a/arch/arm/mach-iop33x/pci.c
+++ /dev/null
@@ -1,222 +0,0 @@
-/*
- * arch/arm/mach-iop33x/pci.c
- *
- * PCI support for the Intel IOP331 chipset
- *
- * Author: Dave Jiang (dave.jiang@intel.com)
- * Copyright (C) 2003, 2004 Intel Corp.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/slab.h>
-#include <linux/mm.h>
-#include <linux/init.h>
-#include <linux/ioport.h>
-
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/system.h>
-#include <asm/hardware.h>
-#include <asm/mach/pci.h>
-
-#include <asm/arch/iop331.h>
-
-#undef DEBUG
-#undef DEBUG1
-
-#ifdef DEBUG
-#define  DBG(x...) printk(x)
-#else
-#define  DBG(x...) do { } while (0)
-#endif
-
-#ifdef DEBUG1
-#define  DBG1(x...) printk(x)
-#else
-#define  DBG1(x...) do { } while (0)
-#endif
-
-/*
- * This routine builds either a type0 or type1 configuration command.  If the
- * bus is on the 80331 then a type0 made, else a type1 is created.
- */
-static u32 iop331_cfg_address(struct pci_bus *bus, int devfn, int where)
-{
-	struct pci_sys_data *sys = bus->sysdata;
-	u32 addr;
-
-	if (sys->busnr == bus->number)
-		addr = 1 << (PCI_SLOT(devfn) + 16) | (PCI_SLOT(devfn) << 11);
-	else
-		addr = bus->number << 16 | PCI_SLOT(devfn) << 11 | 1;
-
-	addr |=	PCI_FUNC(devfn) << 8 | (where & ~3);
-
-	return addr;
-}
-
-/*
- * This routine checks the status of the last configuration cycle.  If an error
- * was detected it returns a 1, else it returns a 0.  The errors being checked
- * are parity, master abort, target abort (master and target).  These types of
- * errors occure during a config cycle where there is no device, like during
- * the discovery stage.
- */
-static int iop331_pci_status(void)
-{
-	unsigned int status;
-	int ret = 0;
-
-	/*
-	 * Check the status registers.
-	 */
-	status = *IOP331_ATUSR;
-	if (status & 0xf900)
-	{
-		DBG("\t\t\tPCI: P0 - status = 0x%08x\n", status);
-		*IOP331_ATUSR = status & 0xf900;
-		ret = 1;
-	}
-	status = *IOP331_ATUISR;
-	if (status & 0x679f)
-	{
-		DBG("\t\t\tPCI: P1 - status = 0x%08x\n", status);
-		*IOP331_ATUISR = status & 0x679f;
-		ret = 1;
-	}
-	return ret;
-}
-
-/*
- * Simply write the address register and read the configuration
- * data.  Note that the 4 nop's ensure that we are able to handle
- * a delayed abort (in theory.)
- */
-static inline u32 iop331_read(unsigned long addr)
-{
-	u32 val;
-
-	__asm__ __volatile__(
-		"str	%1, [%2]\n\t"
-		"ldr	%0, [%3]\n\t"
-		"nop\n\t"
-		"nop\n\t"
-		"nop\n\t"
-		"nop\n\t"
-		: "=r" (val)
-		: "r" (addr), "r" (IOP331_OCCAR), "r" (IOP331_OCCDR));
-
-	return val;
-}
-
-/*
- * The read routines must check the error status of the last configuration
- * cycle.  If there was an error, the routine returns all hex f's.
- */
-static int
-iop331_read_config(struct pci_bus *bus, unsigned int devfn, int where,
-		int size, u32 *value)
-{
-	unsigned long addr = iop331_cfg_address(bus, devfn, where);
-	u32 val = iop331_read(addr) >> ((where & 3) * 8);
-
-	if( iop331_pci_status() )
-		val = 0xffffffff;
-
-	*value = val;
-
-	return PCIBIOS_SUCCESSFUL;
-}
-
-static int
-iop331_write_config(struct pci_bus *bus, unsigned int devfn, int where,
-		int size, u32 value)
-{
-	unsigned long addr = iop331_cfg_address(bus, devfn, where);
-	u32 val;
-
-	if (size != 4) {
-		val = iop331_read(addr);
-		if (!iop331_pci_status() == 0)
-			return PCIBIOS_SUCCESSFUL;
-
-		where = (where & 3) * 8;
-
-		if (size == 1)
-			val &= ~(0xff << where);
-		else
-			val &= ~(0xffff << where);
-
-		*IOP331_OCCDR = val | value << where;
-	} else {
-		asm volatile(
-			"str	%1, [%2]\n\t"
-			"str	%0, [%3]\n\t"
-			"nop\n\t"
-			"nop\n\t"
-			"nop\n\t"
-			"nop\n\t"
-			:
-			: "r" (value), "r" (addr),
-			  "r" (IOP331_OCCAR), "r" (IOP331_OCCDR));
-	}
-
-	return PCIBIOS_SUCCESSFUL;
-}
-
-static struct pci_ops iop331_ops = {
-	.read	= iop331_read_config,
-	.write	= iop331_write_config,
-};
-
-/*
- * When a PCI device does not exist during config cycles, the XScale gets a
- * bus error instead of returning 0xffffffff. This handler simply returns.
- */
-int
-iop331_pci_abort(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
-{
-	DBG("PCI abort: address = 0x%08lx fsr = 0x%03x PC = 0x%08lx LR = 0x%08lx\n",
-		addr, fsr, regs->ARM_pc, regs->ARM_lr);
-
-	/*
-	 * If it was an imprecise abort, then we need to correct the
-	 * return address to be _after_ the instruction.
-	 */
-	if (fsr & (1 << 10))
-		regs->ARM_pc += 4;
-
-	return 0;
-}
-
-/*
- * Scan an IOP331 PCI bus.  sys->bus defines which bus we scan.
- */
-struct pci_bus *iop331_scan_bus(int nr, struct pci_sys_data *sys)
-{
-	return pci_scan_bus(sys->busnr, &iop331_ops, sys);
-}
-
-void iop331_init(void)
-{
-	DBG1("PCI:  Intel 80331 PCI init code.\n");
-	DBG1("\tATU: IOP331_ATUCMD=0x%04x\n", *IOP331_ATUCMD);
-	DBG1("\tATU: IOP331_OMWTVR0=0x%04x, IOP331_OIOWTVR=0x%04x\n",
-			*IOP331_OMWTVR0,
-			*IOP331_OIOWTVR);
-	DBG1("\tATU: IOP331_OMWTVR1=0x%04x\n", *IOP331_OMWTVR1);
-	DBG1("\tATU: IOP331_ATUCR=0x%08x\n", *IOP331_ATUCR);
-	DBG1("\tATU: IOP331_IABAR0=0x%08x IOP331_IALR0=0x%08x IOP331_IATVR0=%08x\n", *IOP331_IABAR0, *IOP331_IALR0, *IOP331_IATVR0);
-	DBG1("\tATU: IOP31_IABAR1=0x%08x IOP331_IALR1=0x%08x\n", *IOP331_IABAR1, *IOP331_IALR1);
-	DBG1("\tATU: IOP331_ERBAR=0x%08x IOP331_ERLR=0x%08x IOP331_ERTVR=%08x\n", *IOP331_ERBAR, *IOP331_ERLR, *IOP331_ERTVR);
-	DBG1("\tATU: IOP331_IABAR2=0x%08x IOP331_IALR2=0x%08x IOP331_IATVR2=%08x\n", *IOP331_IABAR2, *IOP331_IALR2, *IOP331_IATVR2);
-	DBG1("\tATU: IOP331_IABAR3=0x%08x IOP331_IALR3=0x%08x IOP331_IATVR3=%08x\n", *IOP331_IABAR3, *IOP331_IALR3, *IOP331_IATVR3);
-
-	hook_fault_code(16+6, iop331_pci_abort, SIGBUS, "imprecise external abort");
-}
-
diff --git a/include/asm-arm/arch-iop32x/hardware.h b/include/asm-arm/arch-iop32x/hardware.h
index 8fb10134a10..16d0630ab25 100644
--- a/include/asm-arm/arch-iop32x/hardware.h
+++ b/include/asm-arm/arch-iop32x/hardware.h
@@ -19,27 +19,11 @@
  */
 
 #define pcibios_assign_all_busses() 1
+#define PCIBIOS_MIN_IO		0x00000000
+#define PCIBIOS_MIN_MEM		0x00000000
 
 
 /*
- * The min PCI I/O and MEM space are dependent on what specific
- * chipset/platform we are running on, so instead of hardcoding with
- * #ifdefs, we just fill these in the platform level PCI init code.
- */
-#ifndef __ASSEMBLY__
-extern unsigned long iop3xx_pcibios_min_io;
-extern unsigned long iop3xx_pcibios_min_mem;
-
-extern unsigned int processor_id;
-#endif
-
-/*
- * We just set these to zero since they are really bogus anyways
- */
-#define PCIBIOS_MIN_IO      (iop3xx_pcibios_min_io)
-#define PCIBIOS_MIN_MEM     (iop3xx_pcibios_min_mem)
-
-/*
  * Generic chipset bits
  *
  */
diff --git a/include/asm-arm/arch-iop32x/iop321.h b/include/asm-arm/arch-iop32x/iop321.h
index 1a82dd96bf5..e3c85a05e73 100644
--- a/include/asm-arm/arch-iop32x/iop321.h
+++ b/include/asm-arm/arch-iop32x/iop321.h
@@ -25,27 +25,6 @@
 #endif
 
 /*
- * IOP321 I/O and Mem space regions for PCI autoconfiguration
- */
-#define IOP321_PCI_IO_WINDOW_SIZE   0x00010000
-#define IOP321_PCI_LOWER_IO_PA      0x90000000
-#define IOP321_PCI_LOWER_IO_VA      0xfe000000
-#define IOP321_PCI_LOWER_IO_BA      (*IOP321_OIOWTVR)
-#define IOP321_PCI_UPPER_IO_PA      (IOP321_PCI_LOWER_IO_PA + IOP321_PCI_IO_WINDOW_SIZE - 1)
-#define IOP321_PCI_UPPER_IO_VA      (IOP321_PCI_LOWER_IO_VA + IOP321_PCI_IO_WINDOW_SIZE - 1)
-#define IOP321_PCI_UPPER_IO_BA      (IOP321_PCI_LOWER_IO_BA + IOP321_PCI_IO_WINDOW_SIZE - 1)
-#define IOP321_PCI_IO_OFFSET        (IOP321_PCI_LOWER_IO_VA - IOP321_PCI_LOWER_IO_BA)
-
-/* #define IOP321_PCI_MEM_WINDOW_SIZE  (~*IOP321_IALR1 + 1) */
-#define IOP321_PCI_MEM_WINDOW_SIZE  0x04000000 /* 64M outbound window */
-#define IOP321_PCI_LOWER_MEM_PA     0x80000000
-#define IOP321_PCI_LOWER_MEM_BA     (*IOP321_OMWTVR0)
-#define IOP321_PCI_UPPER_MEM_PA     (IOP321_PCI_LOWER_MEM_PA + IOP321_PCI_MEM_WINDOW_SIZE - 1)
-#define IOP321_PCI_UPPER_MEM_BA     (IOP321_PCI_LOWER_MEM_BA + IOP321_PCI_MEM_WINDOW_SIZE - 1)
-#define IOP321_PCI_MEM_OFFSET       (IOP321_PCI_LOWER_MEM_PA - IOP321_PCI_LOWER_MEM_BA)
-
-
-/*
  * IOP321 chipset registers
  */
 #define IOP321_VIRT_MEM_BASE 0xfeffe000  /* chip virtual mem address*/
@@ -55,69 +34,6 @@
 /* Reserved 0x00000000 through 0x000000FF */
 
 /* Address Translation Unit 0x00000100 through 0x000001FF */
-#define IOP321_ATUVID     (volatile u16 *)IOP321_REG_ADDR(0x00000100)
-#define IOP321_ATUDID     (volatile u16 *)IOP321_REG_ADDR(0x00000102)
-#define IOP321_ATUCMD     (volatile u16 *)IOP321_REG_ADDR(0x00000104)
-#define IOP321_ATUSR      (volatile u16 *)IOP321_REG_ADDR(0x00000106)
-#define IOP321_ATURID     (volatile u8  *)IOP321_REG_ADDR(0x00000108)
-#define IOP321_ATUCCR     (volatile u32 *)IOP321_REG_ADDR(0x00000109)
-#define IOP321_ATUCLSR    (volatile u8  *)IOP321_REG_ADDR(0x0000010C)
-#define IOP321_ATULT      (volatile u8  *)IOP321_REG_ADDR(0x0000010D)
-#define IOP321_ATUHTR     (volatile u8  *)IOP321_REG_ADDR(0x0000010E)
-#define IOP321_ATUBIST    (volatile u8  *)IOP321_REG_ADDR(0x0000010F)
-#define IOP321_IABAR0     (volatile u32 *)IOP321_REG_ADDR(0x00000110)
-#define IOP321_IAUBAR0    (volatile u32 *)IOP321_REG_ADDR(0x00000114)
-#define IOP321_IABAR1     (volatile u32 *)IOP321_REG_ADDR(0x00000118)
-#define IOP321_IAUBAR1    (volatile u32 *)IOP321_REG_ADDR(0x0000011C)
-#define IOP321_IABAR2     (volatile u32 *)IOP321_REG_ADDR(0x00000120)
-#define IOP321_IAUBAR2    (volatile u32 *)IOP321_REG_ADDR(0x00000124)
-#define IOP321_ASVIR      (volatile u16 *)IOP321_REG_ADDR(0x0000012C)
-#define IOP321_ASIR       (volatile u16 *)IOP321_REG_ADDR(0x0000012E)
-#define IOP321_ERBAR      (volatile u32 *)IOP321_REG_ADDR(0x00000130)
-/* Reserved 0x00000134 through 0x0000013B */
-#define IOP321_ATUILR     (volatile u8  *)IOP321_REG_ADDR(0x0000013C)
-#define IOP321_ATUIPR     (volatile u8  *)IOP321_REG_ADDR(0x0000013D)
-#define IOP321_ATUMGNT    (volatile u8  *)IOP321_REG_ADDR(0x0000013E)
-#define IOP321_ATUMLAT    (volatile u8  *)IOP321_REG_ADDR(0x0000013F)
-#define IOP321_IALR0      (volatile u32 *)IOP321_REG_ADDR(0x00000140)
-#define IOP321_IATVR0     (volatile u32 *)IOP321_REG_ADDR(0x00000144)
-#define IOP321_ERLR       (volatile u32 *)IOP321_REG_ADDR(0x00000148)
-#define IOP321_ERTVR      (volatile u32 *)IOP321_REG_ADDR(0x0000014C)
-#define IOP321_IALR1      (volatile u32 *)IOP321_REG_ADDR(0x00000150)
-#define IOP321_IALR2      (volatile u32 *)IOP321_REG_ADDR(0x00000154)
-#define IOP321_IATVR2     (volatile u32 *)IOP321_REG_ADDR(0x00000158)
-#define IOP321_OIOWTVR    (volatile u32 *)IOP321_REG_ADDR(0x0000015C)
-#define IOP321_OMWTVR0    (volatile u32 *)IOP321_REG_ADDR(0x00000160)
-#define IOP321_OUMWTVR0   (volatile u32 *)IOP321_REG_ADDR(0x00000164)
-#define IOP321_OMWTVR1    (volatile u32 *)IOP321_REG_ADDR(0x00000168)
-#define IOP321_OUMWTVR1   (volatile u32 *)IOP321_REG_ADDR(0x0000016C)
-/* Reserved 0x00000170 through 0x00000177*/
-#define IOP321_OUDWTVR    (volatile u32 *)IOP321_REG_ADDR(0x00000178)
-/* Reserved 0x0000017C through 0x0000017F*/
-#define IOP321_ATUCR      (volatile u32 *)IOP321_REG_ADDR(0x00000180)
-#define IOP321_PCSR       (volatile u32 *)IOP321_REG_ADDR(0x00000184)
-#define IOP321_ATUISR     (volatile u32 *)IOP321_REG_ADDR(0x00000188)
-#define IOP321_ATUIMR     (volatile u32 *)IOP321_REG_ADDR(0x0000018C)
-#define IOP321_IABAR3     (volatile u32 *)IOP321_REG_ADDR(0x00000190)
-#define IOP321_IAUBAR3    (volatile u32 *)IOP321_REG_ADDR(0x00000194)
-#define IOP321_IALR3      (volatile u32 *)IOP321_REG_ADDR(0x00000198)
-#define IOP321_IATVR3     (volatile u32 *)IOP321_REG_ADDR(0x0000019C)
-/* Reserved 0x000001A0 through 0x000001A3*/
-#define IOP321_OCCAR      (volatile u32 *)IOP321_REG_ADDR(0x000001A4)
-/* Reserved 0x000001A8 through 0x000001AB*/
-#define IOP321_OCCDR      (volatile u32 *)IOP321_REG_ADDR(0x000001AC)
-/* Reserved 0x000001B0 through 0x000001BB*/
-#define IOP321_PDSCR      (volatile u32 *)IOP321_REG_ADDR(0x000001BC)
-#define IOP321_PMCAPID    (volatile u8  *)IOP321_REG_ADDR(0x000001C0)
-#define IOP321_PMNEXT     (volatile u8  *)IOP321_REG_ADDR(0x000001C1)
-#define IOP321_APMCR      (volatile u16 *)IOP321_REG_ADDR(0x000001C2)
-#define IOP321_APMCSR     (volatile u16 *)IOP321_REG_ADDR(0x000001C4)
-/* Reserved 0x000001C6 through 0x000001DF */
-#define IOP321_PCIXCAPID  (volatile u8  *)IOP321_REG_ADDR(0x000001E0)
-#define IOP321_PCIXNEXT   (volatile u8  *)IOP321_REG_ADDR(0x000001E1)
-#define IOP321_PCIXCMD    (volatile u16 *)IOP321_REG_ADDR(0x000001E2)
-#define IOP321_PCIXSR     (volatile u32 *)IOP321_REG_ADDR(0x000001E4)
-#define IOP321_PCIIRSR    (volatile u32 *)IOP321_REG_ADDR(0x000001EC)
 
 /* Messaging Unit 0x00000300 through 0x000003FF */
 
@@ -317,6 +233,8 @@
 
 /* for I2C bit defs see drivers/i2c/i2c-iop3xx.h */
 
+#include <asm/hardware/iop3xx.h>
+
 
 #ifndef __ASSEMBLY__
 extern void iop321_init_irq(void);
diff --git a/include/asm-arm/arch-iop32x/memory.h b/include/asm-arm/arch-iop32x/memory.h
index b4073f15b40..4c64d9e7229 100644
--- a/include/asm-arm/arch-iop32x/memory.h
+++ b/include/asm-arm/arch-iop32x/memory.h
@@ -20,8 +20,8 @@
  *		to an address that the kernel can use.
  */
 
-#define __virt_to_bus(x)	(((__virt_to_phys(x)) & ~(*IOP321_IATVR2)) | ((*IOP321_IABAR2) & 0xfffffff0))
-#define __bus_to_virt(x)    (__phys_to_virt(((x) & ~(*IOP321_IALR2)) | ( *IOP321_IATVR2)))
+#define __virt_to_bus(x)	(((__virt_to_phys(x)) & ~(*IOP3XX_IATVR2)) | ((*IOP3XX_IABAR2) & 0xfffffff0))
+#define __bus_to_virt(x)	(__phys_to_virt(((x) & ~(*IOP3XX_IALR2)) | ( *IOP3XX_IATVR2)))
 
 
 #endif
diff --git a/include/asm-arm/arch-iop32x/system.h b/include/asm-arm/arch-iop32x/system.h
index d4c8d691e1b..1ac207a0d52 100644
--- a/include/asm-arm/arch-iop32x/system.h
+++ b/include/asm-arm/arch-iop32x/system.h
@@ -16,7 +16,7 @@ static inline void arch_idle(void)
 
 static inline void arch_reset(char mode)
 {
-    *IOP321_PCSR = 0x30;
+    *IOP3XX_PCSR = 0x30;
 
 	if ( 1 && mode == 's') {
 		/* Jump into ROM at address 0 */
diff --git a/include/asm-arm/arch-iop33x/hardware.h b/include/asm-arm/arch-iop33x/hardware.h
index 4a457084c5c..5e3cb32af02 100644
--- a/include/asm-arm/arch-iop33x/hardware.h
+++ b/include/asm-arm/arch-iop33x/hardware.h
@@ -19,27 +19,11 @@
  */
 
 #define pcibios_assign_all_busses() 1
+#define PCIBIOS_MIN_IO		0x00000000
+#define PCIBIOS_MIN_MEM		0x00000000
 
 
 /*
- * The min PCI I/O and MEM space are dependent on what specific
- * chipset/platform we are running on, so instead of hardcoding with
- * #ifdefs, we just fill these in the platform level PCI init code.
- */
-#ifndef __ASSEMBLY__
-extern unsigned long iop3xx_pcibios_min_io;
-extern unsigned long iop3xx_pcibios_min_mem;
-
-extern unsigned int processor_id;
-#endif
-
-/*
- * We just set these to zero since they are really bogus anyways
- */
-#define PCIBIOS_MIN_IO      (iop3xx_pcibios_min_io)
-#define PCIBIOS_MIN_MEM     (iop3xx_pcibios_min_mem)
-
-/*
  * Generic chipset bits
  *
  */
diff --git a/include/asm-arm/arch-iop33x/iop331.h b/include/asm-arm/arch-iop33x/iop331.h
index a7f47122c5e..e85e1a2e1a8 100644
--- a/include/asm-arm/arch-iop33x/iop331.h
+++ b/include/asm-arm/arch-iop33x/iop331.h
@@ -24,27 +24,6 @@
 #endif
 
 /*
- * IOP331 I/O and Mem space regions for PCI autoconfiguration
- */
-#define IOP331_PCI_IO_WINDOW_SIZE   0x00010000
-#define IOP331_PCI_LOWER_IO_PA      0x90000000
-#define IOP331_PCI_LOWER_IO_VA      0xfe000000
-#define IOP331_PCI_LOWER_IO_BA      (*IOP331_OIOWTVR)
-#define IOP331_PCI_UPPER_IO_PA      (IOP331_PCI_LOWER_IO_PA + IOP331_PCI_IO_WINDOW_SIZE - 1)
-#define IOP331_PCI_UPPER_IO_VA      (IOP331_PCI_LOWER_IO_VA + IOP331_PCI_IO_WINDOW_SIZE - 1)
-#define IOP331_PCI_UPPER_IO_BA      (IOP331_PCI_LOWER_IO_BA + IOP331_PCI_IO_WINDOW_SIZE - 1)
-#define IOP331_PCI_IO_OFFSET        (IOP331_PCI_LOWER_IO_VA - IOP331_PCI_LOWER_IO_BA)
-
-/* this can be 128M if OMWTVR1 is set */
-#define IOP331_PCI_MEM_WINDOW_SIZE	0x04000000 /* 64M outbound window */
-/* #define IOP331_PCI_MEM_WINDOW_SIZE  (~*IOP331_IALR1 + 1) */
-#define IOP331_PCI_LOWER_MEM_PA     0x80000000
-#define IOP331_PCI_LOWER_MEM_BA     (*IOP331_OMWTVR0)
-#define IOP331_PCI_UPPER_MEM_PA     (IOP331_PCI_LOWER_MEM_PA + IOP331_PCI_MEM_WINDOW_SIZE - 1)
-#define IOP331_PCI_UPPER_MEM_BA     (IOP331_PCI_LOWER_MEM_BA + IOP331_PCI_MEM_WINDOW_SIZE - 1)
-#define IOP331_PCI_MEM_OFFSET       (IOP331_PCI_LOWER_MEM_PA - IOP331_PCI_LOWER_MEM_BA)
-
-/*
  * IOP331 chipset registers
  */
 #define IOP331_VIRT_MEM_BASE  0xfeffe000  /* chip virtual mem address*/
@@ -54,79 +33,6 @@
 /* Reserved 0x00000000 through 0x000000FF */
 
 /* Address Translation Unit 0x00000100 through 0x000001FF */
-#define IOP331_ATUVID     (volatile u16 *)IOP331_REG_ADDR(0x00000100)
-#define IOP331_ATUDID     (volatile u16 *)IOP331_REG_ADDR(0x00000102)
-#define IOP331_ATUCMD     (volatile u16 *)IOP331_REG_ADDR(0x00000104)
-#define IOP331_ATUSR      (volatile u16 *)IOP331_REG_ADDR(0x00000106)
-#define IOP331_ATURID     (volatile u8  *)IOP331_REG_ADDR(0x00000108)
-#define IOP331_ATUCCR     (volatile u32 *)IOP331_REG_ADDR(0x00000109)
-#define IOP331_ATUCLSR    (volatile u8  *)IOP331_REG_ADDR(0x0000010C)
-#define IOP331_ATULT      (volatile u8  *)IOP331_REG_ADDR(0x0000010D)
-#define IOP331_ATUHTR     (volatile u8  *)IOP331_REG_ADDR(0x0000010E)
-#define IOP331_ATUBIST    (volatile u8  *)IOP331_REG_ADDR(0x0000010F)
-#define IOP331_IABAR0     (volatile u32 *)IOP331_REG_ADDR(0x00000110)
-#define IOP331_IAUBAR0    (volatile u32 *)IOP331_REG_ADDR(0x00000114)
-#define IOP331_IABAR1     (volatile u32 *)IOP331_REG_ADDR(0x00000118)
-#define IOP331_IAUBAR1    (volatile u32 *)IOP331_REG_ADDR(0x0000011C)
-#define IOP331_IABAR2     (volatile u32 *)IOP331_REG_ADDR(0x00000120)
-#define IOP331_IAUBAR2    (volatile u32 *)IOP331_REG_ADDR(0x00000124)
-#define IOP331_ASVIR      (volatile u16 *)IOP331_REG_ADDR(0x0000012C)
-#define IOP331_ASIR       (volatile u16 *)IOP331_REG_ADDR(0x0000012E)
-#define IOP331_ERBAR      (volatile u32 *)IOP331_REG_ADDR(0x00000130)
-#define IOP331_ATU_CAPPTR (volatile u32 *)IOP331_REG_ADDR(0x00000134)
-/* Reserved 0x00000138 through 0x0000013B */
-#define IOP331_ATUILR     (volatile u8  *)IOP331_REG_ADDR(0x0000013C)
-#define IOP331_ATUIPR     (volatile u8  *)IOP331_REG_ADDR(0x0000013D)
-#define IOP331_ATUMGNT    (volatile u8  *)IOP331_REG_ADDR(0x0000013E)
-#define IOP331_ATUMLAT    (volatile u8  *)IOP331_REG_ADDR(0x0000013F)
-#define IOP331_IALR0      (volatile u32 *)IOP331_REG_ADDR(0x00000140)
-#define IOP331_IATVR0     (volatile u32 *)IOP331_REG_ADDR(0x00000144)
-#define IOP331_ERLR       (volatile u32 *)IOP331_REG_ADDR(0x00000148)
-#define IOP331_ERTVR      (volatile u32 *)IOP331_REG_ADDR(0x0000014C)
-#define IOP331_IALR1      (volatile u32 *)IOP331_REG_ADDR(0x00000150)
-#define IOP331_IALR2      (volatile u32 *)IOP331_REG_ADDR(0x00000154)
-#define IOP331_IATVR2     (volatile u32 *)IOP331_REG_ADDR(0x00000158)
-#define IOP331_OIOWTVR    (volatile u32 *)IOP331_REG_ADDR(0x0000015C)
-#define IOP331_OMWTVR0    (volatile u32 *)IOP331_REG_ADDR(0x00000160)
-#define IOP331_OUMWTVR0   (volatile u32 *)IOP331_REG_ADDR(0x00000164)
-#define IOP331_OMWTVR1    (volatile u32 *)IOP331_REG_ADDR(0x00000168)
-#define IOP331_OUMWTVR1   (volatile u32 *)IOP331_REG_ADDR(0x0000016C)
-/* Reserved 0x00000170 through 0x00000177*/
-#define IOP331_OUDWTVR    (volatile u32 *)IOP331_REG_ADDR(0x00000178)
-/* Reserved 0x0000017C through 0x0000017F*/
-#define IOP331_ATUCR      (volatile u32 *)IOP331_REG_ADDR(0x00000180)
-#define IOP331_PCSR       (volatile u32 *)IOP331_REG_ADDR(0x00000184)
-#define IOP331_ATUISR     (volatile u32 *)IOP331_REG_ADDR(0x00000188)
-#define IOP331_ATUIMR     (volatile u32 *)IOP331_REG_ADDR(0x0000018C)
-#define IOP331_IABAR3     (volatile u32 *)IOP331_REG_ADDR(0x00000190)
-#define IOP331_IAUBAR3    (volatile u32 *)IOP331_REG_ADDR(0x00000194)
-#define IOP331_IALR3      (volatile u32 *)IOP331_REG_ADDR(0x00000198)
-#define IOP331_IATVR3     (volatile u32 *)IOP331_REG_ADDR(0x0000019C)
-/* Reserved 0x000001A0 through 0x000001A3*/
-#define IOP331_OCCAR      (volatile u32 *)IOP331_REG_ADDR(0x000001A4)
-/* Reserved 0x000001A8 through 0x000001AB*/
-#define IOP331_OCCDR      (volatile u32 *)IOP331_REG_ADDR(0x000001AC)
-/* Reserved 0x000001B0 through 0x000001BB*/
-#define IOP331_VPDCAPID   (volatile u8 *)IOP331_REG_ADDR(0x000001B8)
-#define IOP331_VPDNXTP    (volatile u8 *)IOP331_REG_ADDR(0x000001B9)
-#define IOP331_VPDAR	  (volatile u16 *)IOP331_REG_ADDR(0x000001BA)
-#define IOP331_VPDDR      (volatile u32 *)IOP331_REG_ADDR(0x000001BC)
-#define IOP331_PMCAPID    (volatile u8 *)IOP331_REG_ADDR(0x000001C0)
-#define IOP331_PMNEXT     (volatile u8 *)IOP331_REG_ADDR(0x000001C1)
-#define IOP331_APMCR      (volatile u16 *)IOP331_REG_ADDR(0x000001C2)
-#define IOP331_APMCSR     (volatile u16 *)IOP331_REG_ADDR(0x000001C4)
-/* Reserved 0x000001C6 through 0x000001CF */
-#define IOP331_MSICAPID   (volatile u8 *)IOP331_REG_ADDR(0x000001D0)
-#define IOP331_MSINXTP	  (volatile u8 *)IOP331_REG_ADDR(0x000001D1)
-#define IOP331_MSIMCR     (volatile u16 *)IOP331_REG_ADDR(0x000001D2)
-#define IOP331_MSIMAR     (volatile u32 *)IOP331_REG_ADDR(0x000001D4)
-#define IOP331_MSIMUAR	  (volatile u32 *)IOP331_REG_ADDR(0x000001D8)
-#define IOP331_MSIMDR	  (volatile u32 *)IOP331_REG_ADDR(0x000001DC)
-#define IOP331_PCIXCAPID  (volatile u8 *)IOP331_REG_ADDR(0x000001E0)
-#define IOP331_PCIXNEXT   (volatile u8 *)IOP331_REG_ADDR(0x000001E1)
-#define IOP331_PCIXCMD    (volatile u16 *)IOP331_REG_ADDR(0x000001E2)
-#define IOP331_PCIXSR     (volatile u32 *)IOP331_REG_ADDR(0x000001E4)
-#define IOP331_PCIIRSR    (volatile u32 *)IOP331_REG_ADDR(0x000001EC)
 
 /* Messaging Unit 0x00000300 through 0x000003FF */
 
@@ -332,6 +238,8 @@
 
 /* Reserved 0x0000178c through 0x000019ff */
 
+#include <asm/hardware/iop3xx.h>
+
 
 #ifndef __ASSEMBLY__
 extern void iop331_init_irq(void);
diff --git a/include/asm-arm/arch-iop33x/memory.h b/include/asm-arm/arch-iop33x/memory.h
index 5e47164934c..de208d2cca4 100644
--- a/include/asm-arm/arch-iop33x/memory.h
+++ b/include/asm-arm/arch-iop33x/memory.h
@@ -19,8 +19,8 @@
  * bus_to_virt: Used to convert an address for DMA operations
  *		to an address that the kernel can use.
  */
-#define __virt_to_bus(x)	(((__virt_to_phys(x)) & ~(*IOP331_IATVR2)) | ((*IOP331_IABAR2) & 0xfffffff0))
-#define __bus_to_virt(x)    (__phys_to_virt(((x) & ~(*IOP331_IALR2)) | ( *IOP331_IATVR2)))
+#define __virt_to_bus(x)	(((__virt_to_phys(x)) & ~(*IOP3XX_IATVR2)) | ((*IOP3XX_IABAR2) & 0xfffffff0))
+#define __bus_to_virt(x)	(__phys_to_virt(((x) & ~(*IOP3XX_IALR2)) | ( *IOP3XX_IATVR2)))
 
 
 #endif
diff --git a/include/asm-arm/arch-iop33x/system.h b/include/asm-arm/arch-iop33x/system.h
index 43cc787ea62..8270ad9f86c 100644
--- a/include/asm-arm/arch-iop33x/system.h
+++ b/include/asm-arm/arch-iop33x/system.h
@@ -16,7 +16,7 @@ static inline void arch_idle(void)
 
 static inline void arch_reset(char mode)
 {
-    *IOP331_PCSR = 0x30;
+    *IOP3XX_PCSR = 0x30;
 
 	if ( 1 && mode == 's') {
 		/* Jump into ROM at address 0 */
diff --git a/include/asm-arm/mach/pci.h b/include/asm-arm/mach/pci.h
index cb41defad4a..24621c49a0c 100644
--- a/include/asm-arm/mach/pci.h
+++ b/include/asm-arm/mach/pci.h
@@ -56,14 +56,6 @@ extern int iop3xx_pci_setup(int nr, struct pci_sys_data *);
 extern struct pci_bus *iop3xx_pci_scan_bus(int nr, struct pci_sys_data *);
 extern void iop3xx_pci_preinit(void);
 
-extern int iop321_setup(int nr, struct pci_sys_data *);
-extern struct pci_bus *iop321_scan_bus(int nr, struct pci_sys_data *);
-extern void iop321_init(void);
-
-extern int iop331_setup(int nr, struct pci_sys_data *);
-extern struct pci_bus *iop331_scan_bus(int nr, struct pci_sys_data *);
-extern void iop331_init(void);
-
 extern int dc21285_setup(int nr, struct pci_sys_data *);
 extern struct pci_bus *dc21285_scan_bus(int nr, struct pci_sys_data *);
 extern void dc21285_preinit(void);