summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorEliezer Tamir <eliezert@broadcom.com>2008-02-28 11:51:50 -0800
committerDavid S. Miller <davem@davemloft.net>2008-02-28 11:51:50 -0800
commitf14106478e372e64be54a3cdab1e2fa83a5c8a35 (patch)
tree5d66afdfdb0e9752e6ca13b28f6e61c4d8558e39
parent250479504ff7d7e8c7d5cf85bedd40fb8d725429 (diff)
[BNX2X]: Correct Link management
Properly protect PHY access between two devices on the same board with a HW lock. Use GPIO to clear all previous configurations before changing link parameters. Shut down the external PHY in case of fan failure. Reducing the MDC/MDIO clock to 2.5MHz due to problems with some devices. Resolve the flow control response according to autoneg with external PHY. Unmasking all PHY interrupts in single write to prevent a race in the interrupts order. LASI indication fixes to work with peculiarities of PHYs. Disable MAC RX to avoid a HW bug when closing the MAC under traffic. Disable parallel detection on HiGig due to HW limitation. Updating the shared memory structure to work with the current bootcode. Signed-off-by: Eliezer Tamir <eliezert@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat
-rw-r--r--drivers/net/bnx2x.c1707
-rw-r--r--drivers/net/bnx2x.h34
-rw-r--r--drivers/net/bnx2x_fw_defs.h2
-rw-r--r--drivers/net/bnx2x_hsi.h428
-rw-r--r--drivers/net/bnx2x_reg.h212
5 files changed, 1734 insertions, 649 deletions
diff --git a/drivers/net/bnx2x.c b/drivers/net/bnx2x.c
index 77867161968..5cd785064ba 100644
--- a/drivers/net/bnx2x.c
+++ b/drivers/net/bnx2x.c
@@ -1,6 +1,6 @@
/* bnx2x.c: Broadcom Everest network driver.
*
- * Copyright (c) 2007 Broadcom Corporation
+ * Copyright (c) 2007-2008 Broadcom Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -65,7 +65,7 @@
#define DRV_MODULE_VERSION "0.40.15"
#define DRV_MODULE_RELDATE "$DateTime: 2007/11/15 07:28:37 $"
-#define BNX2X_BC_VER 0x040009
+#define BNX2X_BC_VER 0x040200
/* Time in jiffies before concluding the transmitter is hung. */
#define TX_TIMEOUT (5*HZ)
@@ -78,7 +78,7 @@ MODULE_AUTHOR("Eliezer Tamir <eliezert@broadcom.com>");
MODULE_DESCRIPTION("Broadcom NetXtreme II BCM57710 Driver");
MODULE_LICENSE("GPL");
MODULE_VERSION(DRV_MODULE_VERSION);
-MODULE_INFO(cvs_version, "$Revision: #356 $");
+MODULE_INFO(cvs_version, "$Revision: #404 $");
static int use_inta;
static int poll;
@@ -1181,12 +1181,175 @@ static u32 bnx2x_bits_dis(struct bnx2x *bp, u32 reg, u32 bits)
return val;
}
+static int bnx2x_hw_lock(struct bnx2x *bp, u32 resource)
+{
+ u32 cnt;
+ u32 lock_status;
+ u32 resource_bit = (1 << resource);
+ u8 func = bp->port;
+
+ /* Validating that the resource is within range */
+ if (resource > HW_LOCK_MAX_RESOURCE_VALUE) {
+ DP(NETIF_MSG_HW,
+ "resource(0x%x) > HW_LOCK_MAX_RESOURCE_VALUE(0x%x)\n",
+ resource, HW_LOCK_MAX_RESOURCE_VALUE);
+ return -EINVAL;
+ }
+
+ /* Validating that the resource is not already taken */
+ lock_status = REG_RD(bp, MISC_REG_DRIVER_CONTROL_1 + func*8);
+ if (lock_status & resource_bit) {
+ DP(NETIF_MSG_HW, "lock_status 0x%x resource_bit 0x%x\n",
+ lock_status, resource_bit);
+ return -EEXIST;
+ }
+
+ /* Try for 1 second every 5ms */
+ for (cnt = 0; cnt < 200; cnt++) {
+ /* Try to acquire the lock */
+ REG_WR(bp, MISC_REG_DRIVER_CONTROL_1 + func*8 + 4,
+ resource_bit);
+ lock_status = REG_RD(bp, MISC_REG_DRIVER_CONTROL_1 + func*8);
+ if (lock_status & resource_bit)
+ return 0;
+
+ msleep(5);
+ }
+ DP(NETIF_MSG_HW, "Timeout\n");
+ return -EAGAIN;
+}
+
+static int bnx2x_hw_unlock(struct bnx2x *bp, u32 resource)
+{
+ u32 lock_status;
+ u32 resource_bit = (1 << resource);
+ u8 func = bp->port;
+
+ /* Validating that the resource is within range */
+ if (resource > HW_LOCK_MAX_RESOURCE_VALUE) {
+ DP(NETIF_MSG_HW,
+ "resource(0x%x) > HW_LOCK_MAX_RESOURCE_VALUE(0x%x)\n",
+ resource, HW_LOCK_MAX_RESOURCE_VALUE);
+ return -EINVAL;
+ }
+
+ /* Validating that the resource is currently taken */
+ lock_status = REG_RD(bp, MISC_REG_DRIVER_CONTROL_1 + func*8);
+ if (!(lock_status & resource_bit)) {
+ DP(NETIF_MSG_HW, "lock_status 0x%x resource_bit 0x%x\n",
+ lock_status, resource_bit);
+ return -EFAULT;
+ }
+
+ REG_WR(bp, MISC_REG_DRIVER_CONTROL_1 + func*8, resource_bit);
+ return 0;
+}
+
+static int bnx2x_set_gpio(struct bnx2x *bp, int gpio_num, u32 mode)
+{
+ /* The GPIO should be swapped if swap register is set and active */
+ int gpio_port = (REG_RD(bp, NIG_REG_PORT_SWAP) &&
+ REG_RD(bp, NIG_REG_STRAP_OVERRIDE)) ^ bp->port;
+ int gpio_shift = gpio_num +
+ (gpio_port ? MISC_REGISTERS_GPIO_PORT_SHIFT : 0);
+ u32 gpio_mask = (1 << gpio_shift);
+ u32 gpio_reg;
+
+ if (gpio_num > MISC_REGISTERS_GPIO_3) {
+ BNX2X_ERR("Invalid GPIO %d\n", gpio_num);
+ return -EINVAL;
+ }
+
+ bnx2x_hw_lock(bp, HW_LOCK_RESOURCE_GPIO);
+ /* read GPIO and mask except the float bits */
+ gpio_reg = (REG_RD(bp, MISC_REG_GPIO) & MISC_REGISTERS_GPIO_FLOAT);
+
+ switch (mode) {
+ case MISC_REGISTERS_GPIO_OUTPUT_LOW:
+ DP(NETIF_MSG_LINK, "Set GPIO %d (shift %d) -> output low\n",
+ gpio_num, gpio_shift);
+ /* clear FLOAT and set CLR */
+ gpio_reg &= ~(gpio_mask << MISC_REGISTERS_GPIO_FLOAT_POS);
+ gpio_reg |= (gpio_mask << MISC_REGISTERS_GPIO_CLR_POS);
+ break;
+
+ case MISC_REGISTERS_GPIO_OUTPUT_HIGH:
+ DP(NETIF_MSG_LINK, "Set GPIO %d (shift %d) -> output high\n",
+ gpio_num, gpio_shift);
+ /* clear FLOAT and set SET */
+ gpio_reg &= ~(gpio_mask << MISC_REGISTERS_GPIO_FLOAT_POS);
+ gpio_reg |= (gpio_mask << MISC_REGISTERS_GPIO_SET_POS);
+ break;
+
+ case MISC_REGISTERS_GPIO_INPUT_HI_Z :
+ DP(NETIF_MSG_LINK, "Set GPIO %d (shift %d) -> input\n",
+ gpio_num, gpio_shift);
+ /* set FLOAT */
+ gpio_reg |= (gpio_mask << MISC_REGISTERS_GPIO_FLOAT_POS);
+ break;
+
+ default:
+ break;
+ }
+
+ REG_WR(bp, MISC_REG_GPIO, gpio_reg);
+ bnx2x_hw_unlock(bp, HW_LOCK_RESOURCE_GPIO);
+
+ return 0;
+}
+
+static int bnx2x_set_spio(struct bnx2x *bp, int spio_num, u32 mode)
+{
+ u32 spio_mask = (1 << spio_num);
+ u32 spio_reg;
+
+ if ((spio_num < MISC_REGISTERS_SPIO_4) ||
+ (spio_num > MISC_REGISTERS_SPIO_7)) {
+ BNX2X_ERR("Invalid SPIO %d\n", spio_num);
+ return -EINVAL;
+ }
+
+ bnx2x_hw_lock(bp, HW_LOCK_RESOURCE_SPIO);
+ /* read SPIO and mask except the float bits */
+ spio_reg = (REG_RD(bp, MISC_REG_SPIO) & MISC_REGISTERS_SPIO_FLOAT);
+
+ switch (mode) {
+ case MISC_REGISTERS_SPIO_OUTPUT_LOW :
+ DP(NETIF_MSG_LINK, "Set SPIO %d -> output low\n", spio_num);
+ /* clear FLOAT and set CLR */
+ spio_reg &= ~(spio_mask << MISC_REGISTERS_SPIO_FLOAT_POS);
+ spio_reg |= (spio_mask << MISC_REGISTERS_SPIO_CLR_POS);
+ break;
+
+ case MISC_REGISTERS_SPIO_OUTPUT_HIGH :
+ DP(NETIF_MSG_LINK, "Set SPIO %d -> output high\n", spio_num);
+ /* clear FLOAT and set SET */
+ spio_reg &= ~(spio_mask << MISC_REGISTERS_SPIO_FLOAT_POS);
+ spio_reg |= (spio_mask << MISC_REGISTERS_SPIO_SET_POS);
+ break;
+
+ case MISC_REGISTERS_SPIO_INPUT_HI_Z:
+ DP(NETIF_MSG_LINK, "Set SPIO %d -> input\n", spio_num);
+ /* set FLOAT */
+ spio_reg |= (spio_mask << MISC_REGISTERS_SPIO_FLOAT_POS);
+ break;
+
+ default:
+ break;
+ }
+
+ REG_WR(bp, MISC_REG_SPIO, spio_reg);
+ bnx2x_hw_unlock(bp, HW_LOCK_RESOURCE_SPIO);
+
+ return 0;
+}
+
static int bnx2x_mdio22_write(struct bnx2x *bp, u32 reg, u32 val)
{
- int rc;
- u32 tmp, i;
int port = bp->port;
u32 emac_base = port ? GRCBASE_EMAC1 : GRCBASE_EMAC0;
+ u32 tmp;
+ int i, rc;
/* DP(NETIF_MSG_HW, "phy_addr 0x%x reg 0x%x val 0x%08x\n",
bp->phy_addr, reg, val); */
@@ -1238,8 +1401,8 @@ static int bnx2x_mdio22_read(struct bnx2x *bp, u32 reg, u32 *ret_val)
{
int port = bp->port;
u32 emac_base = port ? GRCBASE_EMAC1 : GRCBASE_EMAC0;
- u32 val, i;
- int rc;
+ u32 val;
+ int i, rc;
if (bp->phy_flags & PHY_INT_MODE_AUTO_POLLING_FLAG) {
@@ -1288,58 +1451,54 @@ static int bnx2x_mdio22_read(struct bnx2x *bp, u32 reg, u32 *ret_val)
return rc;
}
-static int bnx2x_mdio45_write(struct bnx2x *bp, u32 reg, u32 addr, u32 val)
+static int bnx2x_mdio45_ctrl_write(struct bnx2x *bp, u32 mdio_ctrl,
+ u32 phy_addr, u32 reg, u32 addr, u32 val)
{
- int rc = 0;
- u32 tmp, i;
- int port = bp->port;
- u32 emac_base = port ? GRCBASE_EMAC1 : GRCBASE_EMAC0;
-
- if (bp->phy_flags & PHY_INT_MODE_AUTO_POLLING_FLAG) {
-
- tmp = REG_RD(bp, emac_base + EMAC_REG_EMAC_MDIO_MODE);
- tmp &= ~EMAC_MDIO_MODE_AUTO_POLL;
- EMAC_WR(EMAC_REG_EMAC_MDIO_MODE, tmp);
- REG_RD(bp, emac_base + EMAC_REG_EMAC_MDIO_MODE);
- udelay(40);
- }
+ u32 tmp;
+ int i, rc = 0;
- /* set clause 45 mode */
- tmp = REG_RD(bp, emac_base + EMAC_REG_EMAC_MDIO_MODE);
- tmp |= EMAC_MDIO_MODE_CLAUSE_45;
- EMAC_WR(EMAC_REG_EMAC_MDIO_MODE, tmp);
+ /* set clause 45 mode, slow down the MDIO clock to 2.5MHz
+ * (a value of 49==0x31) and make sure that the AUTO poll is off
+ */
+ tmp = REG_RD(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_MODE);
+ tmp &= ~(EMAC_MDIO_MODE_AUTO_POLL | EMAC_MDIO_MODE_CLOCK_CNT);
+ tmp |= (EMAC_MDIO_MODE_CLAUSE_45 |
+ (49 << EMAC_MDIO_MODE_CLOCK_CNT_BITSHIFT));
+ REG_WR(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_MODE, tmp);
+ REG_RD(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_MODE);
+ udelay(40);
/* address */
- tmp = ((bp->phy_addr << 21) | (reg << 16) | addr |
+ tmp = ((phy_addr << 21) | (reg << 16) | addr |
EMAC_MDIO_COMM_COMMAND_ADDRESS |
EMAC_MDIO_COMM_START_BUSY);
- EMAC_WR(EMAC_REG_EMAC_MDIO_COMM, tmp);
+ REG_WR(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_COMM, tmp);
for (i = 0; i < 50; i++) {
udelay(10);
- tmp = REG_RD(bp, emac_base + EMAC_REG_EMAC_MDIO_COMM);
+ tmp = REG_RD(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_COMM);
if (!(tmp & EMAC_MDIO_COMM_START_BUSY)) {
udelay(5);
break;
}
}
-
if (tmp & EMAC_MDIO_COMM_START_BUSY) {
BNX2X_ERR("write phy register failed\n");
rc = -EBUSY;
+
} else {
/* data */
- tmp = ((bp->phy_addr << 21) | (reg << 16) | val |
+ tmp = ((phy_addr << 21) | (reg << 16) | val |
EMAC_MDIO_COMM_COMMAND_WRITE_45 |
EMAC_MDIO_COMM_START_BUSY);
- EMAC_WR(EMAC_REG_EMAC_MDIO_COMM, tmp);
+ REG_WR(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_COMM, tmp);
for (i = 0; i < 50; i++) {
udelay(10);
- tmp = REG_RD(bp, emac_base + EMAC_REG_EMAC_MDIO_COMM);
+ tmp = REG_RD(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_COMM);
if (!(tmp & EMAC_MDIO_COMM_START_BUSY)) {
udelay(5);
break;
@@ -1353,75 +1512,78 @@ static int bnx2x_mdio45_write(struct bnx2x *bp, u32 reg, u32 addr, u32 val)
}
}
- /* unset clause 45 mode */
- tmp = REG_RD(bp, emac_base + EMAC_REG_EMAC_MDIO_MODE);
- tmp &= ~EMAC_MDIO_MODE_CLAUSE_45;
- EMAC_WR(EMAC_REG_EMAC_MDIO_MODE, tmp);
-
- if (bp->phy_flags & PHY_INT_MODE_AUTO_POLLING_FLAG) {
-
- tmp = REG_RD(bp, emac_base + EMAC_REG_EMAC_MDIO_MODE);
+ /* unset clause 45 mode, set the MDIO clock to a faster value
+ * (0x13 => 6.25Mhz) and restore the AUTO poll if needed
+ */
+ tmp = REG_RD(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_MODE);
+ tmp &= ~(EMAC_MDIO_MODE_CLAUSE_45 | EMAC_MDIO_MODE_CLOCK_CNT);
+ tmp |= (0x13 << EMAC_MDIO_MODE_CLOCK_CNT_BITSHIFT);
+ if (bp->phy_flags & PHY_INT_MODE_AUTO_POLLING_FLAG)
tmp |= EMAC_MDIO_MODE_AUTO_POLL;
- EMAC_WR(EMAC_REG_EMAC_MDIO_MODE, tmp);
- }
+ REG_WR(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_MODE, tmp);
return rc;
}
-static int bnx2x_mdio45_read(struct bnx2x *bp, u32 reg, u32 addr,
- u32 *ret_val)
+static int bnx2x_mdio45_write(struct bnx2x *bp, u32 phy_addr, u32 reg,
+ u32 addr, u32 val)
{
- int port = bp->port;
- u32 emac_base = port ? GRCBASE_EMAC1 : GRCBASE_EMAC0;
- u32 val, i;
- int rc = 0;
+ u32 emac_base = bp->port ? GRCBASE_EMAC1 : GRCBASE_EMAC0;
- if (bp->phy_flags & PHY_INT_MODE_AUTO_POLLING_FLAG) {
+ return bnx2x_mdio45_ctrl_write(bp, emac_base, phy_addr,
+ reg, addr, val);
+}
- val = REG_RD(bp, emac_base + EMAC_REG_EMAC_MDIO_MODE);
- val &= ~EMAC_MDIO_MODE_AUTO_POLL;
- EMAC_WR(EMAC_REG_EMAC_MDIO_MODE, val);
- REG_RD(bp, emac_base + EMAC_REG_EMAC_MDIO_MODE);
- udelay(40);
- }
+static int bnx2x_mdio45_ctrl_read(struct bnx2x *bp, u32 mdio_ctrl,
+ u32 phy_addr, u32 reg, u32 addr,
+ u32 *ret_val)
+{
+ u32 val;
+ int i, rc = 0;
- /* set clause 45 mode */
- val = REG_RD(bp, emac_base + EMAC_REG_EMAC_MDIO_MODE);
- val |= EMAC_MDIO_MODE_CLAUSE_45;
- EMAC_WR(EMAC_REG_EMAC_MDIO_MODE, val);
+ /* set clause 45 mode, slow down the MDIO clock to 2.5MHz
+ * (a value of 49==0x31) and make sure that the AUTO poll is off
+ */
+ val = REG_RD(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_MODE);
+ val &= ~(EMAC_MDIO_MODE_AUTO_POLL | EMAC_MDIO_MODE_CLOCK_CNT);
+ val |= (EMAC_MDIO_MODE_CLAUSE_45 |
+ (49 << EMAC_MDIO_MODE_CLOCK_CNT_BITSHIFT));
+ REG_WR(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_MODE, val);
+ REG_RD(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_MODE);
+ udelay(40);
/* address */
- val = ((bp->phy_addr << 21) | (reg << 16) | addr |
+ val = ((phy_addr << 21) | (reg << 16) | addr |
EMAC_MDIO_COMM_COMMAND_ADDRESS |
EMAC_MDIO_COMM_START_BUSY);
- EMAC_WR(EMAC_REG_EMAC_MDIO_COMM, val);
+ REG_WR(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_COMM, val);
for (i = 0; i < 50; i++) {
udelay(10);
- val = REG_RD(bp, emac_base + EMAC_REG_EMAC_MDIO_COMM);
+ val = REG_RD(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_COMM);
if (!(val & EMAC_MDIO_COMM_START_BUSY)) {
udelay(5);
break;
}
}
-
if (val & EMAC_MDIO_COMM_START_BUSY) {
BNX2X_ERR("read phy register failed\n");
*ret_val = 0;
rc = -EBUSY;
+
} else {
/* data */
- val = ((bp->phy_addr << 21) | (reg << 16) |
+ val = ((phy_addr << 21) | (reg << 16) |
EMAC_MDIO_COMM_COMMAND_READ_45 |
EMAC_MDIO_COMM_START_BUSY);
- EMAC_WR(EMAC_REG_EMAC_MDIO_COMM, val);
+ REG_WR(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_COMM, val);
for (i = 0; i < 50; i++) {
udelay(10);
- val = REG_RD(bp, emac_base + EMAC_REG_EMAC_MDIO_COMM);
+ val = REG_RD(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_COMM);
if (!(val & EMAC_MDIO_COMM_START_BUSY)) {
val &= EMAC_MDIO_COMM_DATA;
break;
@@ -1438,31 +1600,39 @@ static int bnx2x_mdio45_read(struct bnx2x *bp, u32 reg, u32 addr,
*ret_val = val;
}
- /* unset clause 45 mode */
- val = REG_RD(bp, emac_base + EMAC_REG_EMAC_MDIO_MODE);
- val &= ~EMAC_MDIO_MODE_CLAUSE_45;
- EMAC_WR(EMAC_REG_EMAC_MDIO_MODE, val);
-
- if (bp->phy_flags & PHY_INT_MODE_AUTO_POLLING_FLAG) {
-
- val = REG_RD(bp, emac_base + EMAC_REG_EMAC_MDIO_MODE);
+ /* unset clause 45 mode, set the MDIO clock to a faster value
+ * (0x13 => 6.25Mhz) and restore the AUTO poll if needed
+ */
+ val = REG_RD(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_MODE);
+ val &= ~(EMAC_MDIO_MODE_CLAUSE_45 | EMAC_MDIO_MODE_CLOCK_CNT);
+ val |= (0x13 << EMAC_MDIO_MODE_CLOCK_CNT_BITSHIFT);
+ if (bp->phy_flags & PHY_INT_MODE_AUTO_POLLING_FLAG)
val |= EMAC_MDIO_MODE_AUTO_POLL;
- EMAC_WR(EMAC_REG_EMAC_MDIO_MODE, val);
- }
+ REG_WR(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_MODE, val);
return rc;
}
-static int bnx2x_mdio45_vwrite(struct bnx2x *bp, u32 reg, u32 addr, u32 val)
+static int bnx2x_mdio45_read(struct bnx2x *bp, u32 phy_addr, u32 reg,
+ u32 addr, u32 *ret_val)
+{
+ u32 emac_base = bp->port ? GRCBASE_EMAC1 : GRCBASE_EMAC0;
+
+ return bnx2x_mdio45_ctrl_read(bp, emac_base, phy_addr,
+ reg, addr, ret_val);
+}
+
+static int bnx2x_mdio45_vwrite(struct bnx2x *bp, u32 phy_addr, u32 reg,
+ u32 addr, u32 val)
{
int i;
u32 rd_val;
might_sleep();
for (i = 0; i < 10; i++) {
- bnx2x_mdio45_write(bp, reg, addr, val);
+ bnx2x_mdio45_write(bp, phy_addr, reg, addr, val);
msleep(5);
- bnx2x_mdio45_read(bp, reg, addr, &rd_val);
+ bnx2x_mdio45_read(bp, phy_addr, reg, addr, &rd_val);
/* if the read value is not the same as the value we wrote,
we should write it again */
if (rd_val == val)
@@ -1476,10 +1646,73 @@ static int bnx2x_mdio45_vwrite(struct bnx2x *bp, u32 reg, u32 addr, u32 val)
* link management
*/
+static void bnx2x_pause_resolve(struct bnx2x *bp, u32 pause_result)
+{
+ switch (pause_result) { /* ASYM P ASYM P */
+ case 0xb: /* 1 0 1 1 */
+ bp->flow_ctrl = FLOW_CTRL_TX;
+ break;
+
+ case 0xe: /* 1 1 1 0 */
+ bp->flow_ctrl = FLOW_CTRL_RX;
+ break;
+
+ case 0x5: /* 0 1 0 1 */
+ case 0x7: /* 0 1 1 1 */
+ case 0xd: /* 1 1 0 1 */
+ case 0xf: /* 1 1 1 1 */
+ bp->flow_ctrl = FLOW_CTRL_BOTH;
+ break;
+
+ default:
+ break;
+ }
+}
+
+static u8 bnx2x_ext_phy_resove_fc(struct bnx2x *bp)
+{
+ u32 ext_phy_addr;
+ u32 ld_pause; /* local */
+ u32 lp_pause; /* link partner */
+ u32 an_complete; /* AN complete */
+ u32 pause_result;
+ u8 ret = 0;
+
+ ext_phy_addr = ((bp->ext_phy_config &
+ PORT_HW_CFG_XGXS_EXT_PHY_ADDR_MASK) >>
+ PORT_HW_CFG_XGXS_EXT_PHY_ADDR_SHIFT);
+
+ /* read twice */
+ bnx2x_mdio45_read(bp, ext_phy_addr,
+ EXT_PHY_KR_AUTO_NEG_DEVAD,
+ EXT_PHY_KR_STATUS, &an_complete);
+ bnx2x_mdio45_read(bp, ext_phy_addr,
+ EXT_PHY_KR_AUTO_NEG_DEVAD,
+ EXT_PHY_KR_STATUS, &an_complete);
+
+ if (an_complete & EXT_PHY_KR_AUTO_NEG_COMPLETE) {
+ ret = 1;
+ bnx2x_mdio45_read(bp, ext_phy_addr,
+ EXT_PHY_KR_AUTO_NEG_DEVAD,
+ EXT_PHY_KR_AUTO_NEG_ADVERT, &ld_pause);
+ bnx2x_mdio45_read(bp, ext_phy_addr,
+ EXT_PHY_KR_AUTO_NEG_DEVAD,
+ EXT_PHY_KR_LP_AUTO_NEG, &lp_pause);
+ pause_result = (ld_pause &
+ EXT_PHY_KR_AUTO_NEG_ADVERT_PAUSE_MASK) >> 8;
+ pause_result |= (lp_pause &
+ EXT_PHY_KR_AUTO_NEG_ADVERT_PAUSE_MASK) >> 10;
+ DP(NETIF_MSG_LINK, "Ext PHY pause result 0x%x \n",
+ pause_result);
+ bnx2x_pause_resolve(bp, pause_result);
+ }
+ return ret;
+}
+
static void bnx2x_flow_ctrl_resolve(struct bnx2x *bp, u32 gp_status)
{
- u32 ld_pause; /* local driver */
- u32 lp_pause; /* link partner */
+ u32 ld_pause; /* local driver */
+ u32 lp_pause; /* link partner */
u32 pause_result;
bp->flow_ctrl = 0;
@@ -1501,45 +1734,57 @@ static void bnx2x_flow_ctrl_resolve(struct bnx2x *bp, u32 gp_status)
pause_result |= (lp_pause &
MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_MASK)>>7;
DP(NETIF_MSG_LINK, "pause_result 0x%x\n", pause_result);
+ bnx2x_pause_resolve(bp, pause_result);
+ } else if (!(bp->req_autoneg & AUTONEG_FLOW_CTRL) ||
+ !(bnx2x_ext_phy_resove_fc(bp))) {
+ /* forced speed */
+ if (bp->req_autoneg & AUTONEG_FLOW_CTRL) {
+ switch (bp->req_flow_ctrl) {
+ case FLOW_CTRL_AUTO:
+ if (bp->dev->mtu <= 4500)
+ bp->flow_ctrl = FLOW_CTRL_BOTH;
+ else
+ bp->flow_ctrl = FLOW_CTRL_TX;
+ break;
- switch (pause_result) { /* ASYM P ASYM P */
- case 0xb: /* 1 0 1 1 */
- bp->flow_ctrl = FLOW_CTRL_TX;
- break;
-
- case 0xe: /* 1 1 1 0 */
- bp->flow_ctrl = FLOW_CTRL_RX;
- break;
+ case FLOW_CTRL_TX:
+ bp->flow_ctrl = FLOW_CTRL_TX;
+ break;
- case 0x5: /* 0 1 0 1 */
- case 0x7: /* 0 1 1 1 */
- case 0xd: /* 1 1 0 1 */
- case 0xf: /* 1 1 1 1 */
- bp->flow_ctrl = FLOW_CTRL_BOTH;
- break;
+ case FLOW_CTRL_RX:
+ if (bp->dev->mtu <= 4500)
+ bp->flow_ctrl = FLOW_CTRL_RX;
+ break;
- default:
- break;
- }
+ case FLOW_CTRL_BOTH:
+ if (bp->dev->mtu <= 4500)
+ bp->flow_ctrl = FLOW_CTRL_BOTH;
+ else
+ bp->flow_ctrl = FLOW_CTRL_TX;
+ break;
- } else { /* forced mode */
- switch (bp->req_flow_ctrl) {
- case FLOW_CTRL_AUTO:
- if (bp->dev->mtu <= 4500)
- bp->flow_ctrl = FLOW_CTRL_BOTH;
- else
- bp->flow_ctrl = FLOW_CTRL_TX;
- break;
+ case FLOW_CTRL_NONE:
+ default:
+ break;
+ }
+ } else { /* forced mode */
+ switch (bp->req_flow_ctrl) {
+ case FLOW_CTRL_AUTO:
+ DP(NETIF_MSG_LINK, "req_flow_ctrl 0x%x while"
+ " req_autoneg 0x%x\n",
+ bp->req_flow_ctrl, bp->req_autoneg);
+ break;
- case FLOW_CTRL_TX:
- case FLOW_CTRL_RX:
- case FLOW_CTRL_BOTH:
- bp->flow_ctrl = bp->req_flow_ctrl;
- break;
+ case FLOW_CTRL_TX:
+ case FLOW_CTRL_RX:
+ case FLOW_CTRL_BOTH:
+ bp->flow_ctrl = bp->req_flow_ctrl;
+ break;
- case FLOW_CTRL_NONE:
- default:
- break;
+ case FLOW_CTRL_NONE:
+ default:
+ break;
+ }
}
}
DP(NETIF_MSG_LINK, "flow_ctrl 0x%x\n", bp->flow_ctrl);
@@ -1550,9 +1795,9 @@ static void bnx2x_link_settings_status(struct bnx2x *bp, u32 gp_status)
bp->link_status = 0;
if (gp_status & MDIO_GP_STATUS_TOP_AN_STATUS1_LINK_STATUS) {
- DP(NETIF_MSG_LINK, "link up\n");
+ DP(NETIF_MSG_LINK, "phy link up\n");
- bp->link_up = 1;
+ bp->phy_link_up = 1;
bp->link_status |= LINK_STATUS_LINK_UP;
if (gp_status & MDIO_GP_STATUS_TOP_AN_STATUS1_DUPLEX_STATUS)
@@ -1661,20 +1906,20 @@ static void bnx2x_link_settings_status(struct bnx2x *bp, u32 gp_status)
bp->link_status |= LINK_STATUS_RX_FLOW_CONTROL_ENABLED;
} else { /* link_down */
- DP(NETIF_MSG_LINK, "link down\n");
+ DP(NETIF_MSG_LINK, "phy link down\n");
- bp->link_up = 0;
+ bp->phy_link_up = 0;
bp->line_speed = 0;
bp->duplex = DUPLEX_FULL;
bp->flow_ctrl = 0;
}
- DP(NETIF_MSG_LINK, "gp_status 0x%x link_up %d\n"
+ DP(NETIF_MSG_LINK, "gp_status 0x%x phy_link_up %d\n"
DP_LEVEL " line_speed %d duplex %d flow_ctrl 0x%x"
" link_status 0x%x\n",
- gp_status, bp->link_up, bp->line_speed, bp->duplex, bp->flow_ctrl,
- bp->link_status);
+ gp_status, bp->phy_link_up, bp->line_speed, bp->duplex,
+ bp->flow_ctrl, bp->link_status);
}
static void bnx2x_link_int_ack(struct bnx2x *bp, int is_10g)
@@ -1684,38 +1929,38 @@ static void bnx2x_link_int_ack(struct bnx2x *bp, int is_10g)
/* first reset all status
* we assume only one line will be change at a time */
bnx2x_bits_dis(bp, NIG_REG_STATUS_INTERRUPT_PORT0 + port*4,
- (NIG_XGXS0_LINK_STATUS |
- NIG_SERDES0_LINK_STATUS |
- NIG_STATUS_INTERRUPT_XGXS0_LINK10G));
- if (bp->link_up) {
+ (NIG_STATUS_XGXS0_LINK10G |
+ NIG_STATUS_XGXS0_LINK_STATUS |
+ NIG_STATUS_SERDES0_LINK_STATUS));
+ if (bp->phy_link_up) {
if (is_10g) {
/* Disable the 10G link interrupt
* by writing 1 to the status register
*/
- DP(NETIF_MSG_LINK, "10G XGXS link up\n");
+ DP(NETIF_MSG_LINK, "10G XGXS phy link up\n");
bnx2x_bits_en(bp,
NIG_REG_STATUS_INTERRUPT_PORT0 + port*4,
- NIG_STATUS_INTERRUPT_XGXS0_LINK10G);
+ NIG_STATUS_XGXS0_LINK10G);
} else if (bp->phy_flags & PHY_XGXS_FLAG) {
/* Disable the link interrupt
* by writing 1 to the relevant lane
* in the status register
*/
- DP(NETIF_MSG_LINK, "1G XGXS link up\n");
+ DP(NETIF_MSG_LINK, "1G XGXS phy link up\n");
bnx2x_bits_en(bp,
NIG_REG_STATUS_INTERRUPT_PORT0 + port*4,
((1 << bp->ser_lane) <<
- NIG_XGXS0_LINK_STATUS_SIZE));
+ NIG_STATUS_XGXS0_LINK_STATUS_SIZE));
} else { /* SerDes */
- DP(NETIF_MSG_LINK, "SerDes link up\n");
+ DP(NETIF_MSG_LINK, "SerDes phy link up\n");
/* Disable the link interrupt
* by writing 1 to the status register
*/
bnx2x_bits_en(bp,
NIG_REG_STATUS_INTERRUPT_PORT0 + port*4,
- NIG_SERDES0_LINK_STATUS);
+ NIG_STATUS_SERDES0_LINK_STATUS);
}
} else { /* link_down */
@@ -1726,91 +1971,182 @@ static int bnx2x_ext_phy_is_link_up(struct bnx2x *bp)
{
u32 ext_phy_type;
u32 ext_phy_addr;
- u32 local_phy;
- u32 val = 0;
+ u32 val1 = 0, val2;
u32 rx_sd, pcs_status;
if (bp->phy_flags & PHY_XGXS_FLAG) {
- local_phy = bp->phy_addr;
ext_phy_addr = ((bp->ext_phy_config &
PORT_HW_CFG_XGXS_EXT_PHY_ADDR_MASK) >>
PORT_HW_CFG_XGXS_EXT_PHY_ADDR_SHIFT);
- bp->phy_addr = (u8)ext_phy_addr;
ext_phy_type = XGXS_EXT_PHY_TYPE(bp);
switch (ext_phy_type) {
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT:
DP(NETIF_MSG_LINK, "XGXS Direct\n");
- val = 1;
+ val1 = 1;
break;
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8705:
DP(NETIF_MSG_LINK, "XGXS 8705\n");
- bnx2x_mdio45_read(bp, EXT_PHY_OPT_WIS_DEVAD,
- EXT_PHY_OPT_LASI_STATUS, &val);
- DP(NETIF_MSG_LINK, "8705 LASI status is %d\n", val);
-
- bnx2x_mdio45_read(bp, EXT_PHY_OPT_WIS_DEVAD,
- EXT_PHY_OPT_LASI_STATUS, &val);
- DP(NETIF_MSG_LINK, "8705 LASI status is %d\n", val);
-
- bnx2x_mdio45_read(bp, EXT_PHY_OPT_PMA_PMD_DEVAD,
+ bnx2x_mdio45_read(bp, ext_phy_addr,
+ EXT_PHY_OPT_WIS_DEVAD,
+ EXT_PHY_OPT_LASI_STATUS, &val1);
+ DP(NETIF_MSG_LINK, "8705 LASI status 0x%x\n", val1);
+
+ bnx2x_mdio45_read(bp, ext_phy_addr,
+ EXT_PHY_OPT_WIS_DEVAD,
+ EXT_PHY_OPT_LASI_STATUS, &val1);
+ DP(NETIF_MSG_LINK, "8705 LASI status 0x%x\n", val1);
+
+ bnx2x_mdio45_read(bp, ext_phy_addr,
+ EXT_PHY_OPT_PMA_PMD_DEVAD,
EXT_PHY_OPT_PMD_RX_SD, &rx_sd);
- val = (rx_sd & 0x1);
+ DP(NETIF_MSG_LINK, "8705 rx_sd 0x%x\n", rx_sd);
+ val1 = (rx_sd & 0x1);
break;
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8706:
DP(NETIF_MSG_LINK, "XGXS 8706\n");
- bnx2x_mdio45_read(bp, EXT_PHY_OPT_PMA_PMD_DEVAD,
- EXT_PHY_OPT_LASI_STATUS, &val);
- DP(NETIF_MSG_LINK, "8706 LASI status is %d\n", val);
-
- bnx2x_mdio45_read(bp, EXT_PHY_OPT_PMA_PMD_DEVAD,
- EXT_PHY_OPT_LASI_STATUS, &val);
- DP(NETIF_MSG_LINK, "8706 LASI status is %d\n", val);
-
- bnx2x_mdio45_read(bp, EXT_PHY_OPT_PMA_PMD_DEVAD,
+ bnx2x_mdio45_read(bp, ext_phy_addr,
+ EXT_PHY_OPT_PMA_PMD_DEVAD,
+ EXT_PHY_OPT_LASI_STATUS, &val1);
+ DP(NETIF_MSG_LINK, "8706 LASI status 0x%x\n", val1);
+
+ bnx2x_mdio45_read(bp, ext_phy_addr,
+ EXT_PHY_OPT_PMA_PMD_DEVAD,
+ EXT_PHY_OPT_LASI_STATUS, &val1);
+ DP(NETIF_MSG_LINK, "8706 LASI status 0x%x\n", val1);
+
+ bnx2x_mdio45_read(bp, ext_phy_addr,
+ EXT_PHY_OPT_PMA_PMD_DEVAD,
EXT_PHY_OPT_PMD_RX_SD, &rx_sd);
- bnx2x_mdio45_read(bp, EXT_PHY_OPT_PCS_DEVAD,
- EXT_PHY_OPT_PCS_STATUS, &pcs_status);
+ bnx2x_mdio45_read(bp, ext_phy_addr,
+ EXT_PHY_OPT_PCS_DEVAD,
+ EXT_PHY_OPT_PCS_STATUS, &pcs_status);
+ bnx2x_mdio45_read(bp, ext_phy_addr,
+ EXT_PHY_AUTO_NEG_DEVAD,
+ EXT_PHY_OPT_AN_LINK_STATUS, &val2);
+
DP(NETIF_MSG_LINK, "8706 rx_sd 0x%x"
- " pcs_status 0x%x\n", rx_sd, pcs_status);
- /* link is up if both bit 0 of pmd_rx and
- * bit 0 of pcs_status are set
+ " pcs_status 0x%x 1Gbps link_status 0x%x 0x%x\n",
+ rx_sd, pcs_status, val2, (val2 & (1<<1)));
+ /* link is up if both bit 0 of pmd_rx_sd and
+ * bit 0 of pcs_status are set, or if the autoneg bit
+ 1 is set
+ */
+ val1 = ((rx_sd & pcs_status & 0x1) || (val2 & (1<<1)));
+ break;
+
+ case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8072:
+ bnx2x_hw_lock(bp, HW_LOCK_RESOURCE_8072_MDIO);
+
+ /* clear the interrupt LASI status register */
+ bnx2x_mdio45_ctrl_read(bp, GRCBASE_EMAC0,
+ ext_phy_addr,
+ EXT_PHY_KR_PCS_DEVAD,
+ EXT_PHY_KR_LASI_STATUS, &val2);
+ bnx2x_mdio45_ctrl_read(bp, GRCBASE_EMAC0,
+ ext_phy_addr,
+ EXT_PHY_KR_PCS_DEVAD,
+ EXT_PHY_KR_LASI_STATUS, &val1);
+ DP(NETIF_MSG_LINK, "KR LASI status 0x%x->0x%x\n",
+ val2, val1);
+ /* Check the LASI */
+ bnx2x_mdio45_ctrl_read(bp, GRCBASE_EMAC0,
+ ext_phy_addr,
+ EXT_PHY_KR_PMA_PMD_DEVAD,
+ 0x9003, &val2);
+ bnx2x_mdio45_ctrl_read(bp, GRCBASE_EMAC0,
+ ext_phy_addr,
+ EXT_PHY_KR_PMA_PMD_DEVAD,
+ 0x9003, &val1);
+ DP(NETIF_MSG_LINK, "KR 0x9003 0x%x->0x%x\n",
+ val2, val1);
+ /* Check the link status */
+ bnx2x_mdio45_ctrl_read(bp, GRCBASE_EMAC0,
+ ext_phy_addr,
+ EXT_PHY_KR_PCS_DEVAD,
+ EXT_PHY_KR_PCS_STATUS, &val2);
+ DP(NETIF_MSG_LINK, "KR PCS status 0x%x\n", val2);
+ /* Check the link status on 1.1.2 */
+ bnx2x_mdio45_ctrl_read(bp, GRCBASE_EMAC0,
+ ext_phy_addr,
+ EXT_PHY_OPT_PMA_PMD_DEVAD,
+ EXT_PHY_KR_STATUS, &val2);
+ bnx2x_mdio45_ctrl_read(bp, GRCBASE_EMAC0,
+ ext_phy_addr,
+ EXT_PHY_OPT_PMA_PMD_DEVAD,
+ EXT_PHY_KR_STATUS, &val1);
+ DP(NETIF_MSG_LINK,
+ "KR PMA status 0x%x->0x%x\n", val2, val1);
+ val1 = ((val1 & 4) == 4);
+ /* If 1G was requested assume the link is up */
+ if (!(bp->req_autoneg & AUTONEG_SPEED) &&
+ (bp->req_line_speed == SPEED_1000))
+ val1 = 1;
+ bnx2x_hw_unlock(bp, HW_LOCK_RESOURCE_8072_MDIO);
+ break;
+
+ case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101:
+ bnx2x_mdio45_read(bp, ext_phy_addr,
+ EXT_PHY_OPT_PMA_PMD_DEVAD,
+ EXT_PHY_OPT_LASI_STATUS, &val2);
+ bnx2x_mdio45_read(bp, ext_phy_addr,
+ EXT_PHY_OPT_PMA_PMD_DEVAD,
+ EXT_PHY_OPT_LASI_STATUS, &val1);
+ DP(NETIF_MSG_LINK,
+ "10G-base-T LASI status 0x%x->0x%x\n", val2, val1);
+ bnx2x_mdio45_read(bp, ext_phy_addr,
+ EXT_PHY_OPT_PMA_PMD_DEVAD,
+ EXT_PHY_KR_STATUS, &val2);
+ bnx2x_mdio45_read(bp, ext_phy_addr,
+ EXT_PHY_OPT_PMA_PMD_DEVAD,
+ EXT_PHY_KR_STATUS, &val1);
+ DP(NETIF_MSG_LINK,
+ "10G-base-T PMA status 0x%x->0x%x\n", val2, val1);
+ val1 = ((val1 & 4) == 4);
+ /* if link is up
+ * print the AN outcome of the SFX7101 PHY
*/
- val = (rx_sd & pcs_status);
+ if (val1) {
+ bnx2x_mdio45_read(bp, ext_phy_addr,
+ EXT_PHY_KR_AUTO_NEG_DEVAD,
+ 0x21, &val2);
+ DP(NETIF_MSG_LINK,
+ "SFX7101 AN status 0x%x->%s\n", val2,
+ (val2 & (1<<14)) ? "Master" : "Slave");
+ }
break;
default:
DP(NETIF_MSG_LINK, "BAD XGXS ext_phy_config 0x%x\n",
bp->ext_phy_config);
- val = 0;
+ val1 = 0;
break;
}
- bp->phy_addr = local_phy;
} else { /* SerDes */
ext_phy_type = SERDES_EXT_PHY_TYPE(bp);
switch (ext_phy_type) {
case PORT_HW_CFG_SERDES_EXT_PHY_TYPE_DIRECT:
DP(NETIF_MSG_LINK, "SerDes Direct\n");
- val = 1;
+ val1 = 1;
break;
case PORT_HW_CFG_SERDES_EXT_PHY_TYPE_BCM5482:
DP(NETIF_MSG_LINK, "SerDes 5482\n");
- val = 1;
+ val1 = 1;
break;
default:
DP(NETIF_MSG_LINK, "BAD SerDes ext_phy_config 0x%x\n",
bp->ext_phy_config);
- val = 0;
+ val1 = 0;
break;
}
}
- return val;
+ return val1;
}
static void bnx2x_bmac_enable(struct bnx2x *bp, int is_lb)
@@ -1935,6 +2271,35 @@ static void bnx2x_bmac_enable(struct bnx2x *bp, int is_lb)
bp->stats_state = STATS_STATE_ENABLE;
}
+static void bnx2x_bmac_rx_disable(struct bnx2x *bp)
+{
+ int port = bp->port;
+ u32 bmac_addr = port ? NIG_REG_INGRESS_BMAC1_MEM :
+ NIG_REG_INGRESS_BMAC0_MEM;
+ u32 wb_write[2];
+
+ /* Only if the bmac is out of reset */
+ if (REG_RD(bp, MISC_REG_RESET_REG_2) &
+ (MISC_REGISTERS_RESET_REG_2_RST_BMAC0 << port)) {
+ /* Clear Rx Enable bit in BMAC_CONTROL register */
+#ifdef BNX2X_DMAE_RD
+ bnx2x_read_dmae(bp, bmac_addr +
+ BIGMAC_REGISTER_BMAC_CONTROL, 2);
+ wb_write[0] = *bnx2x_sp(bp, wb_data[0]);
+ wb_write[1] = *bnx2x_sp(bp, wb_data[1]);
+#else
+ wb_write[0] = REG_RD(bp,
+ bmac_addr + BIGMAC_REGISTER_BMAC_CONTROL);
+ wb_write[1] = REG_RD(bp,
+ bmac_addr + BIGMAC_REGISTER_BMAC_CONTROL + 4);
+#endif
+ wb_write[0] &= ~BMAC_CONTROL_RX_ENABLE;
+ REG_WR_DMAE(bp, bmac_addr + BIGMAC_REGISTER_BMAC_CONTROL,
+ wb_write, 2);
+ msleep(1);
+ }
+}
+
static void bnx2x_emac_enable(struct bnx2x *bp)
{
int port = bp->port;
@@ -2233,7 +2598,7 @@ static void bnx2x_pbf_update(struct bnx2x *bp)
static void bnx2x_update_mng(struct bnx2x *bp)
{
if (!nomcp)
- SHMEM_WR(bp, drv_fw_mb[bp->port].link_status,
+ SHMEM_WR(bp, port_mb[bp->port].link_status,
bp->link_status);
}
@@ -2295,19 +2660,19 @@ static void bnx2x_link_down(struct bnx2x *bp)
DP(BNX2X_MSG_STATS, "stats_state - STOP\n");
}
- /* indicate link down */
+ /* indicate no mac active */
bp->phy_flags &= ~(PHY_BMAC_FLAG | PHY_EMAC_FLAG);
- /* reset BigMac */
- REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_CLEAR,
- (MISC_REGISTERS_RESET_REG_2_RST_BMAC0 << port));
+ /* update shared memory */
+ bnx2x_update_mng(bp);
- /* ignore drain flag interrupt */
/* activate nig drain */
NIG_WR(NIG_REG_EGRESS_DRAIN0_MODE + port*4, 1);
- /* update shared memory */
- bnx2x_update_mng(bp);
+ /* reset BigMac */
+ bnx2x_bmac_rx_disable(bp);
+ REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_CLEAR,
+ (MISC_REGISTERS_RESET_REG_2_RST_BMAC0 << port));
/* indicate link down */
bnx2x_link_report(bp);
@@ -2318,14 +2683,15 @@ static void bnx2x_init_mac_stats(struct bnx2x *bp);
/* This function is called upon link interrupt */
static void bnx2x_link_update(struct bnx2x *bp)
{
- u32 gp_status;
int port = bp->port;
int i;
+ u32 gp_status;
int link_10g;
- DP(NETIF_MSG_LINK, "port %x, is xgxs %x, stat_mask 0x%x,"
+ DP(NETIF_MSG_LINK, "port %x, %s, int_status 0x%x,"
" int_mask 0x%x, saved_mask 0x%x, MI_INT %x, SERDES_LINK %x,"
- " 10G %x, XGXS_LINK %x\n", port, (bp->phy_flags & PHY_XGXS_FLAG),
+ " 10G %x, XGXS_LINK %x\n", port,
+ (bp->phy_flags & PHY_XGXS_FLAG)? "XGXS":"SerDes",
REG_RD(bp, NIG_REG_STATUS_INTERRUPT_PORT0 + port*4),
REG_RD(bp, NIG_REG_MASK_INTERRUPT_PORT0 + port*4), bp->nig_mask,
REG_RD(bp, NIG_REG_EMAC0_STATUS_MISC_MI_INT + port*0x18),
@@ -2337,7 +2703,7 @@ static void bnx2x_link_update(struct bnx2x *bp)
might_sleep();
MDIO_SET_REG_BANK(bp, MDIO_REG_BANK_GP_STATUS);
/* avoid fast toggling */
- for (i = 0 ; i < 10 ; i++) {
+ for (i = 0; i < 10; i++) {
msleep(10);
bnx2x_mdio22_read(bp, MDIO_GP_STATUS_TOP_AN_STATUS1,
&gp_status);
@@ -2352,7 +2718,8 @@ static void bnx2x_link_update(struct bnx2x *bp)
bnx2x_link_int_ack(bp, link_10g);
/* link is up only if both local phy and external phy are up */
- if (bp->link_up && bnx2x_ext_phy_is_link_up(bp)) {
+ bp->link_up = (bp->phy_link_up && bnx2x_ext_phy_is_link_up(bp));
+ if (bp->link_up) {
if (link_10g) {
bnx2x_bmac_enable(bp, 0);
bnx2x_leds_set(bp, SPEED_10000);
@@ -2428,7 +2795,9 @@ static void bnx2x_reset_unicore(struct bnx2x *bp)
}
}
- BNX2X_ERR("BUG! unicore is still in reset!\n");
+ BNX2X_ERR("BUG! %s (0x%x) is still in reset!\n",
+ (bp->phy_flags & PHY_XGXS_FLAG)? "XGXS":"SerDes",
+ bp->phy_addr);
}
static void bnx2x_set_swap_lanes(struct bnx2x *bp)
@@ -2476,12 +2845,12 @@ static void bnx2x_set_parallel_detection(struct bnx2x *bp)
MDIO_SET_REG_BANK(bp, MDIO_REG_BANK_10G_PARALLEL_DETECT);
bnx2x_mdio22_write(bp,
- MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_LINK,
+ MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_LINK,
MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_LINK_CNT);
bnx2x_mdio22_read(bp,
- MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_CONTROL,
- &control2);
+ MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_CONTROL,
+ &control2);
if (bp->autoneg & AUTONEG_PARALLEL) {
control2 |=
@@ -2491,8 +2860,14 @@ static void bnx2x_set_parallel_detection(struct bnx2x *bp)
~MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_CONTROL_PARDET10G_EN;
}
bnx2x_mdio22_write(bp,
- MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_CONTROL,
- control2);
+ MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_CONTROL,
+ control2);
+
+ /* Disable parallel detection of HiG */
+ MDIO_SET_REG_BANK(bp, MDIO_REG_BANK_XGXS_BLOCK2);
+ bnx2x_mdio22_write(bp, MDIO_XGXS_BLOCK2_UNICORE_MODE_10G,
+ MDIO_XGXS_BLOCK2_UNICORE_MODE_10G_CX4_XGXS |
+ MDIO_XGXS_BLOCK2_UNICORE_MODE_10G_HIGIG_XGXS);
}
}
@@ -2626,7 +3001,7 @@ static void bnx2x_set_brcm_cl37_advertisment(struct bnx2x *bp)
MDIO_SET_REG_BANK(bp, MDIO_REG_BANK_OVER_1G);
/* set extended capabilities */
- if (bp->advertising & ADVERTISED_2500baseT_Full)
+ if (bp->advertising & ADVERTISED_2500baseX_Full)
val |= MDIO_OVER_1G_UP1_2_5G;
if (bp->advertising & ADVERTISED_10000baseT_Full)
val |= MDIO_OVER_1G_UP1_10G;
@@ -2642,20 +3017,91 @@ static void bnx2x_set_ieee_aneg_advertisment(struct bnx2x *bp)
/* for AN, we are always publishing full duplex */
an_adv = MDIO_COMBO_IEEE0_AUTO_NEG_ADV_FULL_DUPLEX;
- /* set pause */
- switch (bp->pause_mode) {
- case PAUSE_SYMMETRIC:
- an_adv |= MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_SYMMETRIC;
- break;
- case PAUSE_ASYMMETRIC:
- an_adv |= MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC;
- break;
- case PAUSE_BOTH:
- an_adv |= MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH;
- break;
- case PAUSE_NONE:
- an_adv |= MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_NONE;
- break;
+ /* resolve pause mode and advertisement
+ * Please refer to Table 28B-3 of the 802.3ab-1999 spec */
+ if (bp->req_autoneg & AUTONEG_FLOW_CTRL) {
+ switch (bp->req_flow_ctrl) {
+ case FLOW_CTRL_AUTO:
+ if (bp->dev->mtu <= 4500) {
+ an_adv |=
+ MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH;
+ bp->advertising |= (ADVERTISED_Pause |
+ ADVERTISED_Asym_Pause);
+ } else {
+ an_adv |=
+ MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC;
+ bp->advertising |= ADVERTISED_Asym_Pause;
+ }
+ break;
+
+ case FLOW_CTRL_TX:
+ an_adv |=
+ MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC;
+ bp->advertising |= ADVERTISED_Asym_Pause;
+ break;
+
+ case FLOW_CTRL_RX:
+ if (bp->dev->mtu <= 4500) {
+ an_adv |=
+ MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH;
+ bp->advertising |= (ADVERTISED_Pause |
+ ADVERTISED_Asym_Pause);
+ } else {
+ an_adv |=
+ MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_NONE;
+ bp->advertising &= ~(ADVERTISED_Pause |
+ ADVERTISED_Asym_Pause);
+ }
+ break;
+
+ case FLOW_CTRL_BOTH:
+ if (bp->dev->mtu <= 4500) {
+ an_adv |=
+ MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH;
+ bp->advertising |= (ADVERTISED_Pause |
+ ADVERTISED_Asym_Pause);
+ } else {
+ an_adv |=
+ MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC;
+ bp->advertising |= ADVERTISED_Asym_Pause;
+ }
+ break;
+
+ case FLOW_CTRL_NONE:
+ default:
+ an_adv |= MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_NONE;
+ bp->advertising &= ~(ADVERTISED_Pause |
+ ADVERTISED_Asym_Pause);
+ break;
+ }
+ } else { /* forced mode */
+ switch (bp->req_flow_ctrl) {
+ case FLOW_CTRL_AUTO:
+ DP(NETIF_MSG_LINK, "req_flow_ctrl 0x%x while"
+ " req_autoneg 0x%x\n",
+ bp->req_flow_ctrl, bp->req_autoneg);
+ break;
+
+ case FLOW_CTRL_TX:
+ an_adv |=
+ MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC;
+ bp->advertising |= ADVERTISED_Asym_Pause;
+ break;
+
+ case FLOW_CTRL_RX:
+ case FLOW_CTRL_BOTH:
+ an_adv |= MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH;
+ bp->advertising |= (ADVERTISED_Pause |
+ ADVERTISED_Asym_Pause);
+ break;
+
+ case FLOW_CTRL_NONE:
+ default:
+ an_adv |= MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_NONE;
+ bp->advertising &= ~(ADVERTISED_Pause |
+ ADVERTISED_Asym_Pause);
+ break;
+ }
}
MDIO_SET_REG_BANK(bp, MDIO_REG_BANK_COMBO_IEEE0);
@@ -2753,47 +3199,162 @@ static void bnx2x_initialize_sgmii_process(struct bnx2x *bp)
static void bnx2x_link_int_enable(struct bnx2x *bp)
{
int port = bp->port;
+ u32 ext_phy_type;
+ u32 mask;
/* setting the status to report on link up
for either XGXS or SerDes */
bnx2x_bits_dis(bp, NIG_REG_STATUS_INTERRUPT_PORT0 + port*4,
- (NIG_XGXS0_LINK_STATUS |
- NIG_STATUS_INTERRUPT_XGXS0_LINK10G |
- NIG_SERDES0_LINK_STATUS));
+ (NIG_STATUS_XGXS0_LINK10G |
+ NIG_STATUS_XGXS0_LINK_STATUS |
+ NIG_STATUS_SERDES0_LINK_STATUS));
if (bp->phy_flags & PHY_XGXS_FLAG) {
- /* TBD -
- * in force mode (not AN) we can enable just the relevant
- * interrupt
- * Even in AN we might enable only one according to the AN
- * speed mask
- */
- bnx2x_bits_en(bp, NIG_REG_MASK_INTERRUPT_PORT0 + port*4,
- (NIG_MASK_XGXS0_LINK_STATUS |
- NIG_MASK_XGXS0_LINK10G));
- DP(NETIF_MSG_LINK, "enable XGXS interrupt\n");
+ mask = (NIG_MASK_XGXS0_LINK10G |
+ NIG_MASK_XGXS0_LINK_STATUS);
+ DP(NETIF_MSG_LINK, "enabled XGXS interrupt\n");
+ ext_phy_type = XGXS_EXT_PHY_TYPE(bp);
+ if ((ext_phy_type != PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT) &&
+ (ext_phy_type != PORT_HW_CFG_XGXS_EXT_PHY_TYPE_FAILURE) &&
+ (ext_phy_type !=
+ PORT_HW_CFG_XGXS_EXT_PHY_TYPE_NOT_CONN)) {
+ mask |= NIG_MASK_MI_INT;
+ DP(NETIF_MSG_LINK, "enabled external phy int\n");
+ }
} else { /* SerDes */
- bnx2x_bits_en(bp, NIG_REG_MASK_INTERRUPT_PORT0 + port*4,
- NIG_MASK_SERDES0_LINK_STATUS);
- DP(NETIF_MSG_LINK, "enable SerDes interrupt\n");
+ mask = NIG_MASK_SERDES0_LINK_STATUS;
+ DP(NETIF_MSG_LINK, "enabled SerDes interrupt\n");
+ ext_phy_type = SERDES_EXT_PHY_TYPE(bp);
+ if ((ext_phy_type !=
+ PORT_HW_CFG_SERDES_EXT_PHY_TYPE_DIRECT) &&
+ (ext_phy_type !=
+ PORT_HW_CFG_SERDES_EXT_PHY_TYPE_NOT_CONN)) {
+ mask |= NIG_MASK_MI_INT;
+ DP(NETIF_MSG_LINK, "enabled external phy int\n");
+ }
}
+ bnx2x_bits_en(bp,
+ NIG_REG_MASK_INTERRUPT_PORT0 + port*4,
+ mask);
+ DP(NETIF_MSG_LINK, "port %x, %s, int_status 0x%x,"
+ " int_mask 0x%x, MI_INT %x, SERDES_LINK %x,"
+ " 10G %x, XGXS_LINK %x\n", port,
+ (bp->phy_flags & PHY_XGXS_FLAG)? "XGXS":"SerDes",
+ REG_RD(bp, NIG_REG_STATUS_INTERRUPT_PORT0 + port*4),
+ REG_RD(bp, NIG_REG_MASK_INTERRUPT_PORT0 + port*4),
+ REG_RD(bp, NIG_REG_EMAC0_STATUS_MISC_MI_INT + port*0x18),
+ REG_RD(bp, NIG_REG_SERDES0_STATUS_LINK_STATUS + port*0x3c),
+ REG_RD(bp, NIG_REG_XGXS0_STATUS_LINK10G + port*0x68),
+ REG_RD(bp, NIG_REG_XGXS0_STATUS_LINK_STATUS + port*0x68)
+ );
+}
+
+static void bnx2x_bcm8072_external_rom_boot(struct bnx2x *bp)
+{
+ u32 ext_phy_addr = ((bp->ext_phy_config &
+ PORT_HW_CFG_XGXS_EXT_PHY_ADDR_MASK) >>
+ PORT_HW_CFG_XGXS_EXT_PHY_ADDR_SHIFT);
+ u32 fw_ver1, fw_ver2;
+
+ /* Need to wait 200ms after reset */
+ msleep(200);
+ /* Boot port from external ROM
+ * Set ser_boot_ctl bit in the MISC_CTRL1 register
+ */
+ bnx2x_mdio45_ctrl_write(bp, GRCBASE_EMAC0, ext_phy_addr,
+ EXT_PHY_KR_PMA_PMD_DEVAD,
+ EXT_PHY_KR_MISC_CTRL1, 0x0001);
+
+ /* Reset internal microprocessor */
+ bnx2x_mdio45_ctrl_write(bp, GRCBASE_EMAC0, ext_phy_addr,
+ EXT_PHY_KR_PMA_PMD_DEVAD, EXT_PHY_KR_GEN_CTRL,
+ EXT_PHY_KR_ROM_RESET_INTERNAL_MP);
+ /* set micro reset = 0 */
+ bnx2x_mdio45_ctrl_write(bp, GRCBASE_EMAC0, ext_phy_addr,
+ EXT_PHY_KR_PMA_PMD_DEVAD, EXT_PHY_KR_GEN_CTRL,
+ EXT_PHY_KR_ROM_MICRO_RESET);
+ /* Reset internal microprocessor */
+ bnx2x_mdio45_ctrl_write(bp, GRCBASE_EMAC0, ext_phy_addr,
+ EXT_PHY_KR_PMA_PMD_DEVAD, EXT_PHY_KR_GEN_CTRL,
+ EXT_PHY_KR_ROM_RESET_INTERNAL_MP);
+ /* wait for 100ms for code download via SPI port */
+ msleep(100);
+
+ /* Clear ser_boot_ctl bit */
+ bnx2x_mdio45_ctrl_write(bp, GRCBASE_EMAC0, ext_phy_addr,
+ EXT_PHY_KR_PMA_PMD_DEVAD,
+ EXT_PHY_KR_MISC_CTRL1, 0x0000);
+ /* Wait 100ms */
+ msleep(100);
+
+ /* Print the PHY FW version */
+ bnx2x_mdio45_ctrl_read(bp, GRCBASE_EMAC0, ext_phy_addr,
+ EXT_PHY_KR_PMA_PMD_DEVAD,
+ 0xca19, &fw_ver1);
+ bnx2x_mdio45_ctrl_read(bp, GRCBASE_EMAC0, ext_phy_addr,
+ EXT_PHY_KR_PMA_PMD_DEVAD,
+ 0xca1a, &fw_ver2);
+ DP(NETIF_MSG_LINK,
+ "8072 FW version 0x%x:0x%x\n", fw_ver1, fw_ver2);
+}
+
+static void bnx2x_bcm8072_force_10G(struct bnx2x *bp)
+{
+ u32 ext_phy_addr = ((bp->ext_phy_config &
+ PORT_HW_CFG_XGXS_EXT_PHY_ADDR_MASK) >>
+ PORT_HW_CFG_XGXS_EXT_PHY_ADDR_SHIFT);
+
+ /* Force KR or KX */
+ bnx2x_mdio45_ctrl_write(bp, GRCBASE_EMAC0, ext_phy_addr,
+ EXT_PHY_KR_PMA_PMD_DEVAD, EXT_PHY_KR_CTRL,
+ 0x2040);
+ bnx2x_mdio45_ctrl_write(bp, GRCBASE_EMAC0, ext_phy_addr,
+ EXT_PHY_KR_PMA_PMD_DEVAD, EXT_PHY_KR_CTRL2,
+ 0x000b);
+ bnx2x_mdio45_ctrl_write(bp, GRCBASE_EMAC0, ext_phy_addr,
+ EXT_PHY_KR_PMA_PMD_DEVAD, EXT_PHY_KR_PMD_CTRL,
+ 0x0000);
+ bnx2x_mdio45_ctrl_write(bp, GRCBASE_EMAC0, ext_phy_addr,
+ EXT_PHY_KR_AUTO_NEG_DEVAD, EXT_PHY_KR_CTRL,
+ 0x0000);
}
static void bnx2x_ext_phy_init(struct bnx2x *bp)
{
- int port = bp->port;
u32 ext_phy_type;
u32 ext_phy_addr;
- u32 local_phy;
+ u32 cnt;
+ u32 ctrl;
+ u32 val = 0;
if (bp->phy_flags & PHY_XGXS_FLAG) {
- local_phy = bp->phy_addr;
ext_phy_addr = ((bp->ext_phy_config &
PORT_HW_CFG_XGXS_EXT_PHY_ADDR_MASK) >>
PORT_HW_CFG_XGXS_EXT_PHY_ADDR_SHIFT);
ext_phy_type = XGXS_EXT_PHY_TYPE(bp);
+ /* Make sure that the soft reset is off (expect for the 8072:
+ * due to the lock, it will be done inside the specific
+ * handling)
+ */
+ if ((ext_phy_type != PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT) &&
+ (ext_phy_type != PORT_HW_CFG_XGXS_EXT_PHY_TYPE_FAILURE) &&
+ (ext_phy_type != PORT_HW_CFG_XGXS_EXT_PHY_TYPE_NOT_CONN) &&
+ (ext_phy_type != PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8072)) {
+ /* Wait for soft reset to get cleared upto 1 sec */
+ for (cnt = 0; cnt < 1000; cnt++) {
+ bnx2x_mdio45_read(bp, ext_phy_addr,
+ EXT_PHY_OPT_PMA_PMD_DEVAD,
+ EXT_PHY_OPT_CNTL, &ctrl);
+ if (!(ctrl & (1<<15)))
+ break;
+ msleep(1);
+ }
+ DP(NETIF_MSG_LINK,
+ "control reg 0x%x (after %d ms)\n", ctrl, cnt);
+ }
+
switch (ext_phy_type) {
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT:
DP(NETIF_MSG_LINK, "XGXS Direct\n");
@@ -2801,49 +3362,235 @@ static void bnx2x_ext_phy_init(struct bnx2x *bp)
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8705:
DP(NETIF_MSG_LINK, "XGXS 8705\n");
- bnx2x_bits_en(bp,
- NIG_REG_MASK_INTERRUPT_PORT0 + port*4,
- NIG_MASK_MI_INT);
- DP(NETIF_MSG_LINK, "enabled external phy int\n");
- bp->phy_addr = ext_phy_type;
- bnx2x_mdio45_vwrite(bp, EXT_PHY_OPT_PMA_PMD_DEVAD,
+ bnx2x_mdio45_vwrite(bp, ext_phy_addr,
+ EXT_PHY_OPT_PMA_PMD_DEVAD,
EXT_PHY_OPT_PMD_MISC_CNTL,
0x8288);
- bnx2x_mdio45_vwrite(bp, EXT_PHY_OPT_PMA_PMD_DEVAD,
+ bnx2x_mdio45_vwrite(bp, ext_phy_addr,
+ EXT_PHY_OPT_PMA_PMD_DEVAD,
EXT_PHY_OPT_PHY_IDENTIFIER,
0x7fbf);
- bnx2x_mdio45_vwrite(bp, EXT_PHY_OPT_PMA_PMD_DEVAD,
+ bnx2x_mdio45_vwrite(bp, ext_phy_addr,
+ EXT_PHY_OPT_PMA_PMD_DEVAD,
EXT_PHY_OPT_CMU_PLL_BYPASS,
0x0100);
- bnx2x_mdio45_vwrite(bp, EXT_PHY_OPT_WIS_DEVAD,
+ bnx2x_mdio45_vwrite(bp, ext_phy_addr,
+ EXT_PHY_OPT_WIS_DEVAD,
EXT_PHY_OPT_LASI_CNTL, 0x1);
break;
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8706:
DP(NETIF_MSG_LINK, "XGXS 8706\n");
- bnx2x_bits_en(bp,
- NIG_REG_MASK_INTERRUPT_PORT0 + port*4,
- NIG_MASK_MI_INT);
- DP(NETIF_MSG_LINK, "enabled external phy int\n");
- bp->phy_addr = ext_phy_type;
- bnx2x_mdio45_vwrite(bp, EXT_PHY_OPT_PMA_PMD_DEVAD,
- EXT_PHY_OPT_PMD_DIGITAL_CNT,
- 0x400);
- bnx2x_mdio45_vwrite(bp, EXT_PHY_OPT_PMA_PMD_DEVAD,
+ if (!(bp->req_autoneg & AUTONEG_SPEED)) {
+ /* Force speed */
+ if (bp->req_line_speed == SPEED_10000) {
+ DP(NETIF_MSG_LINK,
+ "XGXS 8706 force 10Gbps\n");
+ bnx2x_mdio45_vwrite(bp, ext_phy_addr,
+ EXT_PHY_OPT_PMA_PMD_DEVAD,
+ EXT_PHY_OPT_PMD_DIGITAL_CNT,
+ 0x400);
+ } else {
+ /* Force 1Gbps */
+ DP(NETIF_MSG_LINK,
+ "XGXS 8706 force 1Gbps\n");
+
+ bnx2x_mdio45_vwrite(bp, ext_phy_addr,
+ EXT_PHY_OPT_PMA_PMD_DEVAD,
+ EXT_PHY_OPT_CNTL,
+ 0x0040);
+
+ bnx2x_mdio45_vwrite(bp, ext_phy_addr,
+ EXT_PHY_OPT_PMA_PMD_DEVAD,
+ EXT_PHY_OPT_CNTL2,
+ 0x000D);
+ }
+
+ /* Enable LASI */
+ bnx2x_mdio45_vwrite(bp, ext_phy_addr,
+ EXT_PHY_OPT_PMA_PMD_DEVAD,
+ EXT_PHY_OPT_LASI_CNTL,
+ 0x1);
+ } else {
+ /* AUTONEG */
+ /* Allow CL37 through CL73 */
+ DP(NETIF_MSG_LINK, "XGXS 8706 AutoNeg\n");
+ bnx2x_mdio45_vwrite(bp, ext_phy_addr,
+ EXT_PHY_AUTO_NEG_DEVAD,
+ EXT_PHY_OPT_AN_CL37_CL73,
+ 0x040c);
+
+ /* Enable Full-Duplex advertisment on CL37 */
+ bnx2x_mdio45_vwrite(bp, ext_phy_addr,
+ EXT_PHY_AUTO_NEG_DEVAD,
+ EXT_PHY_OPT_AN_CL37_FD,
+ 0x0020);
+ /* Enable CL37 AN */
+ bnx2x_mdio45_vwrite(bp, ext_phy_addr,
+ EXT_PHY_AUTO_NEG_DEVAD,
+ EXT_PHY_OPT_AN_CL37_AN,
+ 0x1000);
+ /* Advertise 10G/1G support */
+ if (bp->advertising &
+ ADVERTISED_1000baseT_Full)
+ val = (1<<5);
+ if (bp->advertising &
+ ADVERTISED_10000baseT_Full)
+ val |= (1<<7);
+
+ bnx2x_mdio45_vwrite(bp, ext_phy_addr,
+ EXT_PHY_AUTO_NEG_DEVAD,
+ EXT_PHY_OPT_AN_ADV, val);
+ /* Enable LASI */
+ bnx2x_mdio45_vwrite(bp, ext_phy_addr,
+ EXT_PHY_OPT_PMA_PMD_DEVAD,
+ EXT_PHY_OPT_LASI_CNTL,
+ 0x1);
+
+ /* Enable clause 73 AN */
+ bnx2x_mdio45_write(bp, ext_phy_addr,
+ EXT_PHY_AUTO_NEG_DEVAD,
+ EXT_PHY_OPT_CNTL,
+ 0x1200);
+ }
+ break;
+
+ case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8072:
+ bnx2x_hw_lock(bp, HW_LOCK_RESOURCE_8072_MDIO);
+ /* Wait for soft reset to get cleared upto 1 sec */
+ for (cnt = 0; cnt < 1000; cnt++) {
+ bnx2x_mdio45_ctrl_read(bp, GRCBASE_EMAC0,
+ ext_phy_addr,
+ EXT_PHY_OPT_PMA_PMD_DEVAD,
+ EXT_PHY_OPT_CNTL, &ctrl);
+ if (!(ctrl & (1<<15)))
+ break;
+ msleep(1);
+ }
+ DP(NETIF_MSG_LINK,
+ "8072 control reg 0x%x (after %d ms)\n",
+ ctrl, cnt);
+
+ bnx2x_bcm8072_external_rom_boot(bp);
+ DP(NETIF_MSG_LINK, "Finshed loading 8072 KR ROM\n");
+
+ /* enable LASI */
+ bnx2x_mdio45_ctrl_write(bp, GRCBASE_EMAC0,
+ ext_phy_addr,
+ EXT_PHY_KR_PMA_PMD_DEVAD,
+ 0x9000, 0x0400);
+ bnx2x_mdio45_ctrl_write(bp, GRCBASE_EMAC0,
+ ext_phy_addr,
+ EXT_PHY_KR_PMA_PMD_DEVAD,
+ EXT_PHY_KR_LASI_CNTL, 0x0004);
+
+ /* If this is forced speed, set to KR or KX
+ * (all other are not supported)
+ */
+ if (!(bp->req_autoneg & AUTONEG_SPEED)) {
+ if (bp->req_line_speed == SPEED_10000) {
+ bnx2x_bcm8072_force_10G(bp);
+ DP(NETIF_MSG_LINK,
+ "Forced speed 10G on 8072\n");
+ /* unlock */
+ bnx2x_hw_unlock(bp,
+ HW_LOCK_RESOURCE_8072_MDIO);
+ break;
+ } else
+ val = (1<<5);
+ } else {
+
+ /* Advertise 10G/1G support */
+ if (bp->advertising &
+ ADVERTISED_1000baseT_Full)
+ val = (1<<5);
+ if (bp->advertising &
+ ADVERTISED_10000baseT_Full)
+ val |= (1<<7);
+ }
+ bnx2x_mdio45_ctrl_write(bp, GRCBASE_EMAC0,
+ ext_phy_addr,
+ EXT_PHY_KR_AUTO_NEG_DEVAD,
+ 0x11, val);
+ /* Add support for CL37 ( passive mode ) I */
+ bnx2x_mdio45_ctrl_write(bp, GRCBASE_EMAC0,
+ ext_phy_addr,
+ EXT_PHY_KR_AUTO_NEG_DEVAD,
+ 0x8370, 0x040c);
+ /* Add support for CL37 ( passive mode ) II */
+ bnx2x_mdio45_ctrl_write(bp, GRCBASE_EMAC0,
+ ext_phy_addr,
+ EXT_PHY_KR_AUTO_NEG_DEVAD,
+ 0xffe4, 0x20);
+ /* Add support for CL37 ( passive mode ) III */
+ bnx2x_mdio45_ctrl_write(bp, GRCBASE_EMAC0,
+ ext_phy_addr,
+ EXT_PHY_KR_AUTO_NEG_DEVAD,
+ 0xffe0, 0x1000);
+ /* Restart autoneg */
+ msleep(500);
+ bnx2x_mdio45_ctrl_write(bp, GRCBASE_EMAC0,
+ ext_phy_addr,
+ EXT_PHY_KR_AUTO_NEG_DEVAD,
+ EXT_PHY_KR_CTRL, 0x1200);
+ DP(NETIF_MSG_LINK, "8072 Autoneg Restart: "
+ "1G %ssupported 10G %ssupported\n",
+ (val & (1<<5)) ? "" : "not ",
+ (val & (1<<7)) ? "" : "not ");
+
+ /* unlock */
+ bnx2x_hw_unlock(bp, HW_LOCK_RESOURCE_8072_MDIO);
+ break;
+
+ case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101:
+ DP(NETIF_MSG_LINK,
+ "Setting the SFX7101 LASI indication\n");
+ bnx2x_mdio45_vwrite(bp, ext_phy_addr,
+ EXT_PHY_OPT_PMA_PMD_DEVAD,
EXT_PHY_OPT_LASI_CNTL, 0x1);
+ DP(NETIF_MSG_LINK,
+ "Setting the SFX7101 LED to blink on traffic\n");
+ bnx2x_mdio45_vwrite(bp, ext_phy_addr,
+ EXT_PHY_OPT_PMA_PMD_DEVAD,
+ 0xC007, (1<<3));
+
+ /* read modify write pause advertizing */
+ bnx2x_mdio45_read(bp, ext_phy_addr,
+ EXT_PHY_KR_AUTO_NEG_DEVAD,
+ EXT_PHY_KR_AUTO_NEG_ADVERT, &val);
+ val &= ~EXT_PHY_KR_AUTO_NEG_ADVERT_PAUSE_BOTH;
+ /* Please refer to Table 28B-3 of 802.3ab-1999 spec. */
+ if (bp->advertising & ADVERTISED_Pause)
+ val |= EXT_PHY_KR_AUTO_NEG_ADVERT_PAUSE;
+
+ if (bp->advertising & ADVERTISED_Asym_Pause) {
+ val |=
+ EXT_PHY_KR_AUTO_NEG_ADVERT_PAUSE_ASYMMETRIC;
+ }
+ DP(NETIF_MSG_LINK, "SFX7101 AN advertize 0x%x\n", val);
+ bnx2x_mdio45_vwrite(bp, ext_phy_addr,
+ EXT_PHY_KR_AUTO_NEG_DEVAD,
+ EXT_PHY_KR_AUTO_NEG_ADVERT, val);
+ /* Restart autoneg */
+ bnx2x_mdio45_read(bp, ext_phy_addr,
+ EXT_PHY_KR_AUTO_NEG_DEVAD,
+ EXT_PHY_KR_CTRL, &val);
+ val |= 0x200;
+ bnx2x_mdio45_write(bp, ext_phy_addr,
+ EXT_PHY_KR_AUTO_NEG_DEVAD,
+ EXT_PHY_KR_CTRL, val);
break;
default:
- DP(NETIF_MSG_LINK, "BAD XGXS ext_phy_config 0x%x\n",
- bp->ext_phy_config);
+ BNX2X_ERR("BAD XGXS ext_phy_config 0x%x\n",
+ bp->ext_phy_config);
break;
}
- bp->phy_addr = local_phy;
} else { /* SerDes */
-/* ext_phy_addr = ((bp->ext_phy_config &
+/* ext_phy_addr = ((bp->ext_phy_config &
PORT_HW_CFG_SERDES_EXT_PHY_ADDR_MASK) >>
PORT_HW_CFG_SERDES_EXT_PHY_ADDR_SHIFT);
*/
@@ -2855,10 +3602,6 @@ static void bnx2x_ext_phy_init(struct bnx2x *bp)
case PORT_HW_CFG_SERDES_EXT_PHY_TYPE_BCM5482:
DP(NETIF_MSG_LINK, "SerDes 5482\n");
- bnx2x_bits_en(bp,
- NIG_REG_MASK_INTERRUPT_PORT0 + port*4,
- NIG_MASK_MI_INT);
- DP(NETIF_MSG_LINK, "enabled external phy int\n");
break;
default:
@@ -2872,8 +3615,22 @@ static void bnx2x_ext_phy_init(struct bnx2x *bp)
static void bnx2x_ext_phy_reset(struct bnx2x *bp)
{
u32 ext_phy_type;
- u32 ext_phy_addr;
- u32 local_phy;
+ u32 ext_phy_addr = ((bp->ext_phy_config &
+ PORT_HW_CFG_XGXS_EXT_PHY_ADDR_MASK) >>
+ PORT_HW_CFG_XGXS_EXT_PHY_ADDR_SHIFT);
+ u32 board = (bp->board & SHARED_HW_CFG_BOARD_TYPE_MASK);
+
+ /* The PHY reset is controled by GPIO 1
+ * Give it 1ms of reset pulse
+ */
+ if ((board != SHARED_HW_CFG_BOARD_TYPE_BCM957710T1002G) &&
+ (board != SHARED_HW_CFG_BOARD_TYPE_BCM957710T1003G)) {
+ bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_1,
+ MISC_REGISTERS_GPIO_OUTPUT_LOW);
+ msleep(1);
+ bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_1,
+ MISC_REGISTERS_GPIO_OUTPUT_HIGH);
+ }
if (bp->phy_flags & PHY_XGXS_FLAG) {
ext_phy_type = XGXS_EXT_PHY_TYPE(bp);
@@ -2884,15 +3641,24 @@ static void bnx2x_ext_phy_reset(struct bnx2x *bp)
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8705:
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8706:
- DP(NETIF_MSG_LINK, "XGXS 8705/6\n");
- local_phy = bp->phy_addr;
- ext_phy_addr = ((bp->ext_phy_config &
- PORT_HW_CFG_XGXS_EXT_PHY_ADDR_MASK) >>
- PORT_HW_CFG_XGXS_EXT_PHY_ADDR_SHIFT);
- bp->phy_addr = (u8)ext_phy_addr;
- bnx2x_mdio45_write(bp, EXT_PHY_OPT_PMA_PMD_DEVAD,
+ DP(NETIF_MSG_LINK, "XGXS 8705/8706\n");
+ bnx2x_mdio45_write(bp, ext_phy_addr,
+ EXT_PHY_OPT_PMA_PMD_DEVAD,
EXT_PHY_OPT_CNTL, 0xa040);
- bp->phy_addr = local_phy;
+ break;
+
+ case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8072:
+ DP(NETIF_MSG_LINK, "XGXS 8072\n");
+ bnx2x_hw_lock(bp, HW_LOCK_RESOURCE_8072_MDIO);
+ bnx2x_mdio45_ctrl_write(bp, GRCBASE_EMAC0,
+ ext_phy_addr,
+ EXT_PHY_KR_PMA_PMD_DEVAD,
+ 0, 1<<15);
+ bnx2x_hw_unlock(bp, HW_LOCK_RESOURCE_8072_MDIO);
+ break;
+
+ case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101:
+ DP(NETIF_MSG_LINK, "XGXS SFX7101\n");
break;
default:
@@ -2931,6 +3697,7 @@ static void bnx2x_link_initialize(struct bnx2x *bp)
NIG_MASK_SERDES0_LINK_STATUS |
NIG_MASK_MI_INT));
+ /* Activate the external PHY */
bnx2x_ext_phy_reset(bp);
bnx2x_set_aer_mmd(bp);
@@ -3011,11 +3778,11 @@ static void bnx2x_link_initialize(struct bnx2x *bp)
bnx2x_initialize_sgmii_process(bp);
}
- /* enable the interrupt */
- bnx2x_link_int_enable(bp);
-
/* init ext phy and enable link state int */
bnx2x_ext_phy_init(bp);
+
+ /* enable the interrupt */
+ bnx2x_link_int_enable(bp);
}
static void bnx2x_phy_deassert(struct bnx2x *bp)
@@ -3074,6 +3841,11 @@ static int bnx2x_phy_init(struct bnx2x *bp)
static void bnx2x_link_reset(struct bnx2x *bp)
{
int port = bp->port;
+ u32 board = (bp->board & SHARED_HW_CFG_BOARD_TYPE_MASK);
+
+ /* update shared memory */
+ bp->link_status = 0;
+ bnx2x_update_mng(bp);
/* disable attentions */
bnx2x_bits_dis(bp, NIG_REG_MASK_INTERRUPT_PORT0 + port*4,
@@ -3082,21 +3854,45 @@ static void bnx2x_link_reset(struct bnx2x *bp)
NIG_MASK_SERDES0_LINK_STATUS |
NIG_MASK_MI_INT));
- bnx2x_ext_phy_reset(bp);
+ /* activate nig drain */
+ NIG_WR(NIG_REG_EGRESS_DRAIN0_MODE + port*4, 1);
+
+ /* disable nig egress interface */
+ NIG_WR(NIG_REG_BMAC0_OUT_EN + port*4, 0);
+ NIG_WR(NIG_REG_EGRESS_EMAC0_OUT_EN + port*4, 0);
+
+ /* Stop BigMac rx */
+ bnx2x_bmac_rx_disable(bp);
+
+ /* disable emac */
+ NIG_WR(NIG_REG_NIG_EMAC0_EN + port*4, 0);
+
+ msleep(10);
+
+ /* The PHY reset is controled by GPIO 1
+ * Hold it as output low
+ */
+ if ((board != SHARED_HW_CFG_BOARD_TYPE_BCM957710T1002G) &&
+ (board != SHARED_HW_CFG_BOARD_TYPE_BCM957710T1003G)) {
+ bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_1,
+ MISC_REGISTERS_GPIO_OUTPUT_LOW);
+ DP(NETIF_MSG_LINK, "reset external PHY\n");
+ }
/* reset the SerDes/XGXS */
REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_3_CLEAR,
(0x1ff << (port*16)));
- /* reset EMAC / BMAC and disable NIG interfaces */
- NIG_WR(NIG_REG_BMAC0_IN_EN + port*4, 0);
- NIG_WR(NIG_REG_BMAC0_OUT_EN + port*4, 0);
+ /* reset BigMac */
+ REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_CLEAR,
+ (MISC_REGISTERS_RESET_REG_2_RST_BMAC0 << port));
- NIG_WR(NIG_REG_NIG_EMAC0_EN + port*4, 0);
+ /* disable nig ingress interface */
+ NIG_WR(NIG_REG_BMAC0_IN_EN + port*4, 0);
NIG_WR(NIG_REG_EMAC0_IN_EN + port*4, 0);
- NIG_WR(NIG_REG_EGRESS_EMAC0_OUT_EN + port*4, 0);
- NIG_WR(NIG_REG_EGRESS_DRAIN0_MODE + port*4, 1);
+ /* set link down */
+ bp->link_up = 0;
}
#ifdef BNX2X_XGXS_LB
@@ -3177,6 +3973,7 @@ static int bnx2x_sp_post(struct bnx2x *bp, int command, int cid,
bnx2x_panic();
return -EBUSY;
}
+
/* CID needs port number to be encoded int it */
bp->spq_prod_bd->hdr.conn_and_cmd_data =
cpu_to_le32(((command << SPE_HDR_CMD_ID_SHIFT) |
@@ -4335,7 +5132,7 @@ static void bnx2x_timer(unsigned long data)
return;
if (atomic_read(&bp->intr_sem) != 0)
- goto bnx2x_restart_timer;
+ goto timer_restart;
if (poll) {
struct bnx2x_fastpath *fp = &bp->fp[0];
@@ -4345,7 +5142,7 @@ static void bnx2x_timer(unsigned long data)
rc = bnx2x_rx_int(fp, 1000);
}
- if (!nomcp && (bp->bc_ver >= 0x040003)) {
+ if (!nomcp) {
int port = bp->port;
u32 drv_pulse;
u32 mcp_pulse;
@@ -4354,9 +5151,9 @@ static void bnx2x_timer(unsigned long data)
bp->fw_drv_pulse_wr_seq &= DRV_PULSE_SEQ_MASK;
/* TBD - add SYSTEM_TIME */
drv_pulse = bp->fw_drv_pulse_wr_seq;
- SHMEM_WR(bp, drv_fw_mb[port].drv_pulse_mb, drv_pulse);
+ SHMEM_WR(bp, func_mb[port].drv_pulse_mb, drv_pulse);
- mcp_pulse = (SHMEM_RD(bp, drv_fw_mb[port].mcp_pulse_mb) &
+ mcp_pulse = (SHMEM_RD(bp, func_mb[port].mcp_pulse_mb) &
MCP_PULSE_SEQ_MASK);
/* The delta between driver pulse and mcp response
* should be 1 (before mcp response) or 0 (after mcp response)
@@ -4370,11 +5167,11 @@ static void bnx2x_timer(unsigned long data)
}
if (bp->stats_state == STATS_STATE_DISABLE)
- goto bnx2x_restart_timer;
+ goto timer_restart;
bnx2x_update_stats(bp);
-bnx2x_restart_timer:
+timer_restart:
mod_timer(&bp->timer, jiffies + bp->current_interval);
}
@@ -5266,8 +6063,10 @@ static int bnx2x_function_init(struct bnx2x *bp, int mode)
if (mode & 0x1) { /* init common */
DP(BNX2X_MSG_MCP, "starting common init func %d mode %x\n",
func, mode);
- REG_WR(bp, MISC_REG_RESET_REG_1, 0xffffffff);
- REG_WR(bp, MISC_REG_RESET_REG_2, 0xfffc);
+ REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_SET,
+ 0xffffffff);
+ REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_SET,
+ 0xfffc);
bnx2x_init_block(bp, MISC_COMMON_START, MISC_COMMON_END);
REG_WR(bp, MISC_REG_LCPLL_CTRL_REG_2, 0x100);
@@ -5487,6 +6286,28 @@ static int bnx2x_function_init(struct bnx2x *bp, int mode)
enable_blocks_attention(bp);
/* enable_blocks_parity(bp); */
+ switch (bp->board & SHARED_HW_CFG_BOARD_TYPE_MASK) {
+ case SHARED_HW_CFG_BOARD_TYPE_BCM957710A1022G:
+ /* Fan failure is indicated by SPIO 5 */
+ bnx2x_set_spio(bp, MISC_REGISTERS_SPIO_5,
+ MISC_REGISTERS_SPIO_INPUT_HI_Z);
+
+ /* set to active low mode */
+ val = REG_RD(bp, MISC_REG_SPIO_INT);
+ val |= ((1 << MISC_REGISTERS_SPIO_5) <<
+ MISC_REGISTERS_SPIO_INT_OLD_SET_POS);
+ REG_WR(bp, MISC_REG_SPIO_INT, val);
+
+ /* enable interrupt to signal the IGU */
+ val = REG_RD(bp, MISC_REG_SPIO_EVENT_EN);
+ val |= (1 << MISC_REGISTERS_SPIO_5);
+ REG_WR(bp, MISC_REG_SPIO_EVENT_EN, val);
+ break;
+
+ default:
+ break;
+ }
+
} /* end of common init */
/* per port init */
@@ -5646,6 +6467,18 @@ static int bnx2x_function_init(struct bnx2x *bp, int mode)
/* Port MCP comes here */
/* Port DMAE comes here */
+ switch (bp->board & SHARED_HW_CFG_BOARD_TYPE_MASK) {
+ case SHARED_HW_CFG_BOARD_TYPE_BCM957710A1022G:
+ /* add SPIO 5 to group 0 */
+ val = REG_RD(bp, MISC_REG_AEU_ENABLE1_FUNC_0_OUT_0);
+ val |= AEU_INPUTS_ATTN_BITS_SPIO5;
+ REG_WR(bp, MISC_REG_AEU_ENABLE1_FUNC_0_OUT_0, val);
+ break;
+
+ default:
+ break;
+ }
+
bnx2x_link_reset(bp);
/* Reset PCIE errors for debug */
@@ -5670,9 +6503,9 @@ static int bnx2x_function_init(struct bnx2x *bp, int mode)
port = bp->port;
bp->fw_drv_pulse_wr_seq =
- (SHMEM_RD(bp, drv_fw_mb[port].drv_pulse_mb) &
+ (SHMEM_RD(bp, func_mb[port].drv_pulse_mb) &
DRV_PULSE_SEQ_MASK);
- bp->fw_mb = SHMEM_RD(bp, drv_fw_mb[port].fw_mb_param);
+ bp->fw_mb = SHMEM_RD(bp, func_mb[port].fw_mb_param);
DP(BNX2X_MSG_MCP, "drv_pulse 0x%x fw_mb 0x%x\n",
bp->fw_drv_pulse_wr_seq, bp->fw_mb);
} else {
@@ -5685,12 +6518,12 @@ static int bnx2x_function_init(struct bnx2x *bp, int mode)
/* send the MCP a request, block until there is a reply */
static u32 bnx2x_fw_command(struct bnx2x *bp, u32 command)
{
- u32 rc = 0;
- u32 seq = ++bp->fw_seq;
int port = bp->port;
+ u32 seq = ++bp->fw_seq;
+ u32 rc = 0;
- SHMEM_WR(bp, drv_fw_mb[port].drv_mb_header, command|seq);
- DP(BNX2X_MSG_MCP, "wrote command (%x) to FW MB\n", command|seq);
+ SHMEM_WR(bp, func_mb[port].drv_mb_header, (command | seq));
+ DP(BNX2X_MSG_MCP, "wrote command (%x) to FW MB\n", (command | seq));
/* let the FW do it's magic ... */
msleep(100); /* TBD */
@@ -5698,19 +6531,20 @@ static u32 bnx2x_fw_command(struct bnx2x *bp, u32 command)
if (CHIP_REV_IS_SLOW(bp))
msleep(900);
- rc = SHMEM_RD(bp, drv_fw_mb[port].fw_mb_header);
-
+ rc = SHMEM_RD(bp, func_mb[port].fw_mb_header);
DP(BNX2X_MSG_MCP, "read (%x) seq is (%x) from FW MB\n", rc, seq);
/* is this a reply to our command? */
if (seq == (rc & FW_MSG_SEQ_NUMBER_MASK)) {
rc &= FW_MSG_CODE_MASK;
+
} else {
/* FW BUG! */
BNX2X_ERR("FW failed to respond!\n");
bnx2x_fw_dump(bp);
rc = 0;
}
+
return rc;
}
@@ -6559,7 +7393,7 @@ static void bnx2x_link_settings_supported(struct bnx2x *bp, u32 switch_cfg)
SUPPORTED_100baseT_Half |
SUPPORTED_100baseT_Full |
SUPPORTED_1000baseT_Full |
- SUPPORTED_2500baseT_Full |
+ SUPPORTED_2500baseX_Full |
SUPPORTED_TP | SUPPORTED_FIBRE |
SUPPORTED_Autoneg |
SUPPORTED_Pause |
@@ -6572,10 +7406,10 @@ static void bnx2x_link_settings_supported(struct bnx2x *bp, u32 switch_cfg)
bp->phy_flags |= PHY_SGMII_FLAG;
- bp->supported |= (/* SUPPORTED_10baseT_Half |
- SUPPORTED_10baseT_Full |
- SUPPORTED_100baseT_Half |
- SUPPORTED_100baseT_Full |*/
+ bp->supported |= (SUPPORTED_10baseT_Half |
+ SUPPORTED_10baseT_Full |
+ SUPPORTED_100baseT_Half |
+ SUPPORTED_100baseT_Full |
SUPPORTED_1000baseT_Full |
SUPPORTED_TP | SUPPORTED_FIBRE |
SUPPORTED_Autoneg |
@@ -6611,7 +7445,7 @@ static void bnx2x_link_settings_supported(struct bnx2x *bp, u32 switch_cfg)
SUPPORTED_100baseT_Half |
SUPPORTED_100baseT_Full |
SUPPORTED_1000baseT_Full |
- SUPPORTED_2500baseT_Full |
+ SUPPORTED_2500baseX_Full |
SUPPORTED_10000baseT_Full |
SUPPORTED_TP | SUPPORTED_FIBRE |
SUPPORTED_Autoneg |
@@ -6620,12 +7454,46 @@ static void bnx2x_link_settings_supported(struct bnx2x *bp, u32 switch_cfg)
break;
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8705:
+ BNX2X_DEV_INFO("ext_phy_type 0x%x (8705)\n",
+ ext_phy_type);
+
+ bp->supported |= (SUPPORTED_10000baseT_Full |
+ SUPPORTED_FIBRE |
+ SUPPORTED_Pause |
+ SUPPORTED_Asym_Pause);
+ break;
+
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8706:
- BNX2X_DEV_INFO("ext_phy_type 0x%x (8705/6)\n",
+ BNX2X_DEV_INFO("ext_phy_type 0x%x (8706)\n",
+ ext_phy_type);
+
+ bp->supported |= (SUPPORTED_10000baseT_Full |
+ SUPPORTED_1000baseT_Full |
+ SUPPORTED_Autoneg |
+ SUPPORTED_FIBRE |
+ SUPPORTED_Pause |
+ SUPPORTED_Asym_Pause);
+ break;
+
+ case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8072:
+ BNX2X_DEV_INFO("ext_phy_type 0x%x (8072)\n",
ext_phy_type);
bp->supported |= (SUPPORTED_10000baseT_Full |
+ SUPPORTED_1000baseT_Full |
SUPPORTED_FIBRE |
+ SUPPORTED_Autoneg |
+ SUPPORTED_Pause |
+ SUPPORTED_Asym_Pause);
+ break;
+
+ case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101:
+ BNX2X_DEV_INFO("ext_phy_type 0x%x (SFX7101)\n",
+ ext_phy_type);
+
+ bp->supported |= (SUPPORTED_10000baseT_Full |
+ SUPPORTED_TP |
+ SUPPORTED_Autoneg |
SUPPORTED_Pause |
SUPPORTED_Asym_Pause);
break;
@@ -6682,7 +7550,7 @@ static void bnx2x_link_settings_supported(struct bnx2x *bp, u32 switch_cfg)
SUPPORTED_1000baseT_Full);
if (!(bp->speed_cap_mask & PORT_HW_CFG_SPEED_CAPABILITY_D0_2_5G))
- bp->supported &= ~SUPPORTED_2500baseT_Full;
+ bp->supported &= ~SUPPORTED_2500baseX_Full;
if (!(bp->speed_cap_mask & PORT_HW_CFG_SPEED_CAPABILITY_D0_10G))
bp->supported &= ~SUPPORTED_10000baseT_Full;
@@ -6702,13 +7570,8 @@ static void bnx2x_link_settings_requested(struct bnx2x *bp)
bp->req_line_speed = 0;
bp->advertising = bp->supported;
} else {
- u32 ext_phy_type;
-
- ext_phy_type = XGXS_EXT_PHY_TYPE(bp);
- if ((ext_phy_type ==
- PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8705) ||
- (ext_phy_type ==
- PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8706)) {
+ if (XGXS_EXT_PHY_TYPE(bp) ==
+ PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8705) {
/* force 10G, no AN */
bp->req_line_speed = SPEED_10000;
bp->advertising =
@@ -6725,8 +7588,7 @@ static void bnx2x_link_settings_requested(struct bnx2x *bp)
break;
case PORT_FEATURE_LINK_SPEED_10M_FULL:
- if (bp->speed_cap_mask &
- PORT_HW_CFG_SPEED_CAPABILITY_D0_10M_FULL) {
+ if (bp->supported & SUPPORTED_10baseT_Full) {
bp->req_line_speed = SPEED_10;
bp->advertising = (ADVERTISED_10baseT_Full |
ADVERTISED_TP);
@@ -6740,8 +7602,7 @@ static void bnx2x_link_settings_requested(struct bnx2x *bp)
break;
case PORT_FEATURE_LINK_SPEED_10M_HALF:
- if (bp->speed_cap_mask &
- PORT_HW_CFG_SPEED_CAPABILITY_D0_10M_HALF) {
+ if (bp->supported & SUPPORTED_10baseT_Half) {
bp->req_line_speed = SPEED_10;
bp->req_duplex = DUPLEX_HALF;
bp->advertising = (ADVERTISED_10baseT_Half |
@@ -6756,8 +7617,7 @@ static void bnx2x_link_settings_requested(struct bnx2x *bp)
break;
case PORT_FEATURE_LINK_SPEED_100M_FULL:
- if (bp->speed_cap_mask &
- PORT_HW_CFG_SPEED_CAPABILITY_D0_100M_FULL) {
+ if (bp->supported & SUPPORTED_100baseT_Full) {
bp->req_line_speed = SPEED_100;
bp->advertising = (ADVERTISED_100baseT_Full |
ADVERTISED_TP);
@@ -6771,8 +7631,7 @@ static void bnx2x_link_settings_requested(struct bnx2x *bp)
break;
case PORT_FEATURE_LINK_SPEED_100M_HALF:
- if (bp->speed_cap_mask &
- PORT_HW_CFG_SPEED_CAPABILITY_D0_100M_HALF) {
+ if (bp->supported & SUPPORTED_100baseT_Half) {
bp->req_line_speed = SPEED_100;
bp->req_duplex = DUPLEX_HALF;
bp->advertising = (ADVERTISED_100baseT_Half |
@@ -6787,8 +7646,7 @@ static void bnx2x_link_settings_requested(struct bnx2x *bp)
break;
case PORT_FEATURE_LINK_SPEED_1G:
- if (bp->speed_cap_mask &
- PORT_HW_CFG_SPEED_CAPABILITY_D0_1G) {
+ if (bp->supported & SUPPORTED_1000baseT_Full) {
bp->req_line_speed = SPEED_1000;
bp->advertising = (ADVERTISED_1000baseT_Full |
ADVERTISED_TP);
@@ -6802,10 +7660,9 @@ static void bnx2x_link_settings_requested(struct bnx2x *bp)
break;
case PORT_FEATURE_LINK_SPEED_2_5G:
- if (bp->speed_cap_mask &
- PORT_HW_CFG_SPEED_CAPABILITY_D0_2_5G) {
+ if (bp->supported & SUPPORTED_2500baseX_Full) {
bp->req_line_speed = SPEED_2500;
- bp->advertising = (ADVERTISED_2500baseT_Full |
+ bp->advertising = (ADVERTISED_2500baseX_Full |
ADVERTISED_TP);
} else {
BNX2X_ERR("NVRAM config error. "
@@ -6819,15 +7676,7 @@ static void bnx2x_link_settings_requested(struct bnx2x *bp)
case PORT_FEATURE_LINK_SPEED_10G_CX4:
case PORT_FEATURE_LINK_SPEED_10G_KX4:
case PORT_FEATURE_LINK_SPEED_10G_KR:
- if (!(bp->phy_flags & PHY_XGXS_FLAG)) {
- BNX2X_ERR("NVRAM config error. "
- "Invalid link_config 0x%x"
- " phy_flags 0x%x\n",
- bp->link_config, bp->phy_flags);
- return;
- }
- if (bp->speed_cap_mask &
- PORT_HW_CFG_SPEED_CAPABILITY_D0_10G) {
+ if (bp->supported & SUPPORTED_10000baseT_Full) {
bp->req_line_speed = SPEED_10000;
bp->advertising = (ADVERTISED_10000baseT_Full |
ADVERTISED_FIBRE);
@@ -6854,43 +7703,13 @@ static void bnx2x_link_settings_requested(struct bnx2x *bp)
bp->req_flow_ctrl = (bp->link_config &
PORT_FEATURE_FLOW_CONTROL_MASK);
- /* Please refer to Table 28B-3 of the 802.3ab-1999 spec */
- switch (bp->req_flow_ctrl) {
- case FLOW_CTRL_AUTO:
+ if ((bp->req_flow_ctrl == FLOW_CTRL_AUTO) &&
+ (bp->supported & SUPPORTED_Autoneg))
bp->req_autoneg |= AUTONEG_FLOW_CTRL;
- if (bp->dev->mtu <= 4500) {
- bp->pause_mode = PAUSE_BOTH;
- bp->advertising |= (ADVERTISED_Pause |
- ADVERTISED_Asym_Pause);
- } else {
- bp->pause_mode = PAUSE_ASYMMETRIC;
- bp->advertising |= ADVERTISED_Asym_Pause;
- }
- break;
-
- case FLOW_CTRL_TX:
- bp->pause_mode = PAUSE_ASYMMETRIC;
- bp->advertising |= ADVERTISED_Asym_Pause;
- break;
-
- case FLOW_CTRL_RX:
- case FLOW_CTRL_BOTH:
- bp->pause_mode = PAUSE_BOTH;
- bp->advertising |= (ADVERTISED_Pause |
- ADVERTISED_Asym_Pause);
- break;
- case FLOW_CTRL_NONE:
- default:
- bp->pause_mode = PAUSE_NONE;
- bp->advertising &= ~(ADVERTISED_Pause |
- ADVERTISED_Asym_Pause);
- break;
- }
- BNX2X_DEV_INFO("req_autoneg 0x%x req_flow_ctrl 0x%x\n"
- KERN_INFO " pause_mode %d advertising 0x%x\n",
- bp->req_autoneg, bp->req_flow_ctrl,
- bp->pause_mode, bp->advertising);
+ BNX2X_DEV_INFO("req_autoneg 0x%x req_flow_ctrl 0x%x"
+ " advertising 0x%x\n",
+ bp->req_autoneg, bp->req_flow_ctrl, bp->advertising);
}
static void bnx2x_get_hwinfo(struct bnx2x *bp)
@@ -6923,16 +7742,16 @@ static void bnx2x_get_hwinfo(struct bnx2x *bp)
val = SHMEM_RD(bp, validity_map[port]);
if ((val & (SHR_MEM_VALIDITY_DEV_INFO | SHR_MEM_VALIDITY_MB))
- != (SHR_MEM_VALIDITY_DEV_INFO | SHR_MEM_VALIDITY_MB))
- BNX2X_ERR("MCP validity signature bad\n");
+ != (SHR_MEM_VALIDITY_DEV_INFO | SHR_MEM_VALIDITY_MB))
+ BNX2X_ERR("BAD MCP validity signature\n");
- bp->fw_seq = (SHMEM_RD(bp, drv_fw_mb[port].drv_mb_header) &
+ bp->fw_seq = (SHMEM_RD(bp, func_mb[port].drv_mb_header) &
DRV_MSG_SEQ_NUMBER_MASK);
bp->hw_config = SHMEM_RD(bp, dev_info.shared_hw_config.config);
-
+ bp->board = SHMEM_RD(bp, dev_info.shared_hw_config.board);
bp->serdes_config =
- SHMEM_RD(bp, dev_info.port_hw_config[bp->port].serdes_config);
+ SHMEM_RD(bp, dev_info.port_hw_config[port].serdes_config);
bp->lane_config =
SHMEM_RD(bp, dev_info.port_hw_config[port].lane_config);
bp->ext_phy_config =
@@ -6945,13 +7764,13 @@ static void bnx2x_get_hwinfo(struct bnx2x *bp)
bp->link_config =
SHMEM_RD(bp, dev_info.port_feature_config[port].link_config);
- BNX2X_DEV_INFO("hw_config (%08x) serdes_config (%08x)\n"
+ BNX2X_DEV_INFO("hw_config (%08x) board (%08x) serdes_config (%08x)\n"
KERN_INFO " lane_config (%08x) ext_phy_config (%08x)\n"
KERN_INFO " speed_cap_mask (%08x) link_config (%08x)"
" fw_seq (%08x)\n",
- bp->hw_config, bp->serdes_config, bp->lane_config,
- bp->ext_phy_config, bp->speed_cap_mask,
- bp->link_config, bp->fw_seq);
+ bp->hw_config, bp->board, bp->serdes_config,
+ bp->lane_config, bp->ext_phy_config,
+ bp->speed_cap_mask, bp->link_config, bp->fw_seq);
switch_cfg = (bp->link_config & PORT_FEATURE_CONNECTED_SWITCH_MASK);
bnx2x_link_settings_supported(bp, switch_cfg);
@@ -7005,14 +7824,8 @@ static void bnx2x_get_hwinfo(struct bnx2x *bp)
return;
set_mac: /* only supposed to happen on emulation/FPGA */
- BNX2X_ERR("warning constant MAC workaround active\n");
- bp->dev->dev_addr[0] = 0;
- bp->dev->dev_addr[1] = 0x50;
- bp->dev->dev_addr[2] = 0xc2;
- bp->dev->dev_addr[3] = 0x2c;
- bp->dev->dev_addr[4] = 0x71;
- bp->dev->dev_addr[5] = port ? 0x0d : 0x0e;
-
+ BNX2X_ERR("warning rendom MAC workaround active\n");
+ random_ether_addr(bp->dev->dev_addr);
memcpy(bp->dev->perm_addr, bp->dev->dev_addr, 6);
}
@@ -7039,19 +7852,34 @@ static int bnx2x_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
}
if (bp->phy_flags & PHY_XGXS_FLAG) {
- cmd->port = PORT_FIBRE;
- } else {
+ u32 ext_phy_type = XGXS_EXT_PHY_TYPE(bp);
+
+ switch (ext_phy_type) {
+ case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT:
+ case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8705:
+ case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8706:
+ case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8072:
+ cmd->port = PORT_FIBRE;
+ break;
+
+ case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101:
+ cmd->port = PORT_TP;
+ break;
+
+ default:
+ DP(NETIF_MSG_LINK, "BAD XGXS ext_phy_config 0x%x\n",
+ bp->ext_phy_config);
+ }
+ } else
cmd->port = PORT_TP;
- }
cmd->phy_address = bp->phy_addr;
cmd->transceiver = XCVR_INTERNAL;
- if (bp->req_autoneg & AUTONEG_SPEED) {
+ if (bp->req_autoneg & AUTONEG_SPEED)
cmd->autoneg = AUTONEG_ENABLE;
- } else {
+ else
cmd->autoneg = AUTONEG_DISABLE;
- }
cmd->maxtxpkt = 0;
cmd->maxrxpkt = 0;
@@ -7082,8 +7910,10 @@ static int bnx2x_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
switch (cmd->port) {
case PORT_TP:
- if (!(bp->supported & SUPPORTED_TP))
+ if (!(bp->supported & SUPPORTED_TP)) {
+ DP(NETIF_MSG_LINK, "TP not supported\n");
return -EINVAL;
+ }
if (bp->phy_flags & PHY_XGXS_FLAG) {
bnx2x_link_reset(bp);
@@ -7093,8 +7923,10 @@ static int bnx2x_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
break;
case PORT_FIBRE:
- if (!(bp->supported & SUPPORTED_FIBRE))
+ if (!(bp->supported & SUPPORTED_FIBRE)) {
+ DP(NETIF_MSG_LINK, "FIBRE not supported\n");
return -EINVAL;
+ }
if (!(bp->phy_flags & PHY_XGXS_FLAG)) {
bnx2x_link_reset(bp);
@@ -7104,12 +7936,15 @@ static int bnx2x_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
break;
default:
+ DP(NETIF_MSG_LINK, "Unknown port type\n");
return -EINVAL;
}
if (cmd->autoneg == AUTONEG_ENABLE) {
- if (!(bp->supported & SUPPORTED_Autoneg))
+ if (!(bp->supported & SUPPORTED_Autoneg)) {
+ DP(NETIF_MSG_LINK, "Aotoneg not supported\n");
return -EINVAL;
+ }
/* advertise the requested speed and duplex if supported */
cmd->advertising &= bp->supported;
@@ -7124,14 +7959,22 @@ static int bnx2x_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
switch (cmd->speed) {
case SPEED_10:
if (cmd->duplex == DUPLEX_FULL) {
- if (!(bp->supported & SUPPORTED_10baseT_Full))
+ if (!(bp->supported &
+ SUPPORTED_10baseT_Full)) {
+ DP(NETIF_MSG_LINK,
+ "10M full not supported\n");
return -EINVAL;
+ }
advertising = (ADVERTISED_10baseT_Full |
ADVERTISED_TP);
} else {
- if (!(bp->supported & SUPPORTED_10baseT_Half))
+ if (!(bp->supported &
+ SUPPORTED_10baseT_Half)) {
+ DP(NETIF_MSG_LINK,
+ "10M half not supported\n");
return -EINVAL;
+ }
advertising = (ADVERTISED_10baseT_Half |
ADVERTISED_TP);
@@ -7141,15 +7984,21 @@ static int bnx2x_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
case SPEED_100:
if (cmd->duplex == DUPLEX_FULL) {
if (!(bp->supported &
- SUPPORTED_100baseT_Full))
+ SUPPORTED_100baseT_Full)) {
+ DP(NETIF_MSG_LINK,
+ "100M full not supported\n");
return -EINVAL;
+ }
advertising = (ADVERTISED_100baseT_Full |
ADVERTISED_TP);
} else {
if (!(bp->supported &
- SUPPORTED_100baseT_Half))
+ SUPPORTED_100baseT_Half)) {
+ DP(NETIF_MSG_LINK,
+ "100M half not supported\n");
return -EINVAL;
+ }
advertising = (ADVERTISED_100baseT_Half |
ADVERTISED_TP);
@@ -7157,39 +8006,54 @@ static int bnx2x_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
break;
case SPEED_1000:
- if (cmd->duplex != DUPLEX_FULL)
+ if (cmd->duplex != DUPLEX_FULL) {
+ DP(NETIF_MSG_LINK, "1G half not supported\n");
return -EINVAL;
+ }
- if (!(bp->supported & SUPPORTED_1000baseT_Full))
+ if (!(bp->supported & SUPPORTED_1000baseT_Full)) {
+ DP(NETIF_MSG_LINK, "1G full not supported\n");
return -EINVAL;
+ }
advertising = (ADVERTISED_1000baseT_Full |
ADVERTISED_TP);
break;
case SPEED_2500:
- if (cmd->duplex != DUPLEX_FULL)
+ if (cmd->duplex != DUPLEX_FULL) {
+ DP(NETIF_MSG_LINK,
+ "2.5G half not supported\n");
return -EINVAL;
+ }
- if (!(bp->supported & SUPPORTED_2500baseT_Full))
+ if (!(bp->supported & SUPPORTED_2500baseX_Full)) {
+ DP(NETIF_MSG_LINK,
+ "2.5G full not supported\n");
return -EINVAL;
+ }
- advertising = (ADVERTISED_2500baseT_Full |
+ advertising = (ADVERTISED_2500baseX_Full |
ADVERTISED_TP);
break;
case SPEED_10000:
- if (cmd->duplex != DUPLEX_FULL)
+ if (cmd->duplex != DUPLEX_FULL) {
+ DP(NETIF_MSG_LINK, "10G half not supported\n");
return -EINVAL;
+ }
- if (!(bp->supported & SUPPORTED_10000baseT_Full))
+ if (!(bp->supported & SUPPORTED_10000baseT_Full)) {
+ DP(NETIF_MSG_LINK, "10G full not supported\n");
return -EINVAL;
+ }
advertising = (ADVERTISED_10000baseT_Full |
ADVERTISED_FIBRE);
break;
default:
+ DP(NETIF_MSG_LINK, "Unsupported speed\n");
return -EINVAL;
}
@@ -7389,8 +8253,7 @@ static void bnx2x_disable_nvram_access(struct bnx2x *bp)
static int bnx2x_nvram_read_dword(struct bnx2x *bp, u32 offset, u32 *ret_val,
u32 cmd_flags)
{
- int rc;
- int count, i;
+ int count, i, rc;
u32 val;
/* build the command word */
@@ -7510,8 +8373,7 @@ static int bnx2x_get_eeprom(struct net_device *dev,
static int bnx2x_nvram_write_dword(struct bnx2x *bp, u32 offset, u32 val,
u32 cmd_flags)
{
- int rc;
- int count, i;
+ int count, i, rc;
/* build the command word */
cmd_flags |= MCPR_NVM_COMMAND_DOIT | MCPR_NVM_COMMAND_WR;
@@ -7548,7 +8410,7 @@ static int bnx2x_nvram_write_dword(struct bnx2x *bp, u32 offset, u32 val,
return rc;
}
-#define BYTE_OFFSET(offset) (8 * (offset & 0x03))
+#define BYTE_OFFSET(offset) (8 * (offset & 0x03))
static int bnx2x_nvram_write1(struct bnx2x *bp, u32 offset, u8 *data_buf,
int buf_size)
@@ -7779,52 +8641,29 @@ static int bnx2x_set_pauseparam(struct net_device *dev,
DP_LEVEL " autoneg %d rx_pause %d tx_pause %d\n",
epause->cmd, epause->autoneg, epause->rx_pause, epause->tx_pause);
- bp->req_flow_ctrl = FLOW_CTRL_AUTO;
if (epause->autoneg) {
- bp->req_autoneg |= AUTONEG_FLOW_CTRL;
- if (bp->dev->mtu <= 4500) {
- bp->pause_mode = PAUSE_BOTH;
- bp->advertising |= (ADVERTISED_Pause |
- ADVERTISED_Asym_Pause);
- } else {
- bp->pause_mode = PAUSE_ASYMMETRIC;
- bp->advertising |= ADVERTISED_Asym_Pause;
+ if (!(bp->supported & SUPPORTED_Autoneg)) {
+ DP(NETIF_MSG_LINK, "Aotoneg not supported\n");
+ return -EINVAL;
}
- } else {
+ bp->req_autoneg |= AUTONEG_FLOW_CTRL;
+ } else
bp->req_autoneg &= ~AUTONEG_FLOW_CTRL;
- if (epause->rx_pause)
- bp->req_flow_ctrl |= FLOW_CTRL_RX;
- if (epause->tx_pause)
- bp->req_flow_ctrl |= FLOW_CTRL_TX;
-
- switch (bp->req_flow_ctrl) {
- case FLOW_CTRL_AUTO:
- bp->req_flow_ctrl = FLOW_CTRL_NONE;
- bp->pause_mode = PAUSE_NONE;
- bp->advertising &= ~(ADVERTISED_Pause |
- ADVERTISED_Asym_Pause);
- break;
+ bp->req_flow_ctrl = FLOW_CTRL_AUTO;
- case FLOW_CTRL_TX:
- bp->pause_mode = PAUSE_ASYMMETRIC;
- bp->advertising |= ADVERTISED_Asym_Pause;
- break;
+ if (epause->rx_pause)
+ bp->req_flow_ctrl |= FLOW_CTRL_RX;
+ if (epause->tx_pause)
+ bp->req_flow_ctrl |= FLOW_CTRL_TX;
- case FLOW_CTRL_RX:
- case FLOW_CTRL_BOTH:
- bp->pause_mode = PAUSE_BOTH;
- bp->advertising |= (ADVERTISED_Pause |
- ADVERTISED_Asym_Pause);
- break;
- }
- }
+ if (!(bp->req_autoneg & AUTONEG_FLOW_CTRL) &&
+ (bp->req_flow_ctrl == FLOW_CTRL_AUTO))
+ bp->req_flow_ctrl = FLOW_CTRL_NONE;
- DP(NETIF_MSG_LINK, "req_autoneg 0x%x req_flow_ctrl 0x%x\n"
- DP_LEVEL " pause_mode %d advertising 0x%x\n",
- bp->req_autoneg, bp->req_flow_ctrl, bp->pause_mode,
- bp->advertising);
+ DP(NETIF_MSG_LINK, "req_autoneg 0x%x req_flow_ctrl 0x%x\n",
+ bp->req_autoneg, bp->req_flow_ctrl);
bnx2x_stop_stats(bp);
bnx2x_link_initialize(bp);
diff --git a/drivers/net/bnx2x.h b/drivers/net/bnx2x.h
index ea9100855c5..dc423e58dad 100644
--- a/drivers/net/bnx2x.h
+++ b/drivers/net/bnx2x.h
@@ -24,6 +24,8 @@
#define BNX2X_MSG_STATS 0x20000 /* was: NETIF_MSG_TIMER */
#define NETIF_MSG_NVM 0x40000 /* was: NETIF_MSG_HW */
#define NETIF_MSG_DMAE 0x80000 /* was: NETIF_MSG_HW */
+#define BNX2X_MSG_SP 0x100000 /* was: NETIF_MSG_INTR */
+#define BNX2X_MSG_FP 0x200000 /* was: NETIF_MSG_INTR */
#define DP_LEVEL KERN_NOTICE /* was: KERN_DEBUG */
@@ -40,6 +42,12 @@
__LINE__, bp->dev?(bp->dev->name):"?", ##__args); \
} while (0)
+/* for logging (never masked) */
+#define BNX2X_LOG(__fmt, __args...) do { \
+ printk(KERN_NOTICE "[%s:%d(%s)]" __fmt, __FUNCTION__, \
+ __LINE__, bp->dev?(bp->dev->name):"?", ##__args); \
+ } while (0)
+
/* before we have a dev->name use dev_info() */
#define BNX2X_DEV_INFO(__fmt, __args...) do { \
if (bp->msglevel & NETIF_MSG_PROBE) \
@@ -574,7 +582,8 @@ struct bnx2x {
u32 fw_mb;
u32 hw_config;
- u32 serdes_config;
+ u32 board;
+ u32 serdes_config;
u32 lane_config;
u32 ext_phy_config;
#define XGXS_EXT_PHY_TYPE(bp) (bp->ext_phy_config & \
@@ -595,11 +604,11 @@ struct bnx2x {
u8 tx_lane_swap;
u8 link_up;
+ u8 phy_link_up;
u32 supported;
/* link settings - missing defines */
#define SUPPORTED_2500baseT_Full (1 << 15)
-#define SUPPORTED_CX4 (1 << 16)
u32 phy_flags;
/*#define PHY_SERDES_FLAG 0x1*/
@@ -644,16 +653,9 @@ struct bnx2x {
#define FLOW_CTRL_BOTH PORT_FEATURE_FLOW_CONTROL_BOTH
#define FLOW_CTRL_NONE PORT_FEATURE_FLOW_CONTROL_NONE
- u32 pause_mode;
-#define PAUSE_NONE 0
-#define PAUSE_SYMMETRIC 1
-#define PAUSE_ASYMMETRIC 2
-#define PAUSE_BOTH 3
-
u32 advertising;
/* link settings - missing defines */
#define ADVERTISED_2500baseT_Full (1 << 15)
-#define ADVERTISED_CX4 (1 << 16)
u32 link_status;
u32 line_speed;
@@ -667,6 +669,8 @@ struct bnx2x {
#define NVRAM_TIMEOUT_COUNT 30000
#define NVRAM_PAGE_SIZE 256
+ u8 wol;
+
int rx_ring_size;
u16 tx_quick_cons_trip_int;
@@ -718,9 +722,6 @@ struct bnx2x {
#endif
char *name;
- u16 bus_speed_mhz;
- u8 wol;
- u8 pad;
/* used to synchronize stats collecting */
int stats_state;
@@ -873,6 +874,7 @@ struct bnx2x {
#define PCICFG_LINK_SPEED 0xf0000
#define PCICFG_LINK_SPEED_SHIFT 16
+#define BMAC_CONTROL_RX_ENABLE 2
/* stuff added to make the code fit 80Col */
#define TPA_TYPE_START ETH_FAST_PATH_RX_CQE_START_FLG
@@ -944,13 +946,13 @@ struct bnx2x {
#define LINK_16GTFD LINK_STATUS_SPEED_AND_DUPLEX_16GTFD
#define LINK_16GXFD LINK_STATUS_SPEED_AND_DUPLEX_16GXFD
-#define NIG_STATUS_INTERRUPT_XGXS0_LINK10G \
+#define NIG_STATUS_XGXS0_LINK10G \
NIG_STATUS_INTERRUPT_PORT0_REG_STATUS_XGXS0_LINK10G
-#define NIG_XGXS0_LINK_STATUS \
+#define NIG_STATUS_XGXS0_LINK_STATUS \
NIG_STATUS_INTERRUPT_PORT0_REG_STATUS_XGXS0_LINK_STATUS
-#define NIG_XGXS0_LINK_STATUS_SIZE \
+#define NIG_STATUS_XGXS0_LINK_STATUS_SIZE \
NIG_STATUS_INTERRUPT_PORT0_REG_STATUS_XGXS0_LINK_STATUS_SIZE
-#define NIG_SERDES0_LINK_STATUS \
+#define NIG_STATUS_SERDES0_LINK_STATUS \
NIG_STATUS_INTERRUPT_PORT0_REG_STATUS_SERDES0_LINK_STATUS
#define NIG_MASK_MI_INT \
NIG_MASK_INTERRUPT_PORT0_REG_MASK_EMAC0_MISC_MI_INT
diff --git a/drivers/net/bnx2x_fw_defs.h b/drivers/net/bnx2x_fw_defs.h
index 62a6eb81025..3b968904ca6 100644
--- a/drivers/net/bnx2x_fw_defs.h
+++ b/drivers/net/bnx2x_fw_defs.h
@@ -1,6 +1,6 @@
/* bnx2x_fw_defs.h: Broadcom Everest network driver.
*
- * Copyright (c) 2007 Broadcom Corporation
+ * Copyright (c) 2007-2008 Broadcom Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
diff --git a/drivers/net/bnx2x_hsi.h b/drivers/net/bnx2x_hsi.h
index 6fd959c34d1..b21075ccb52 100644
--- a/drivers/net/bnx2x_hsi.h
+++ b/drivers/net/bnx2x_hsi.h
@@ -1,6 +1,6 @@
/* bnx2x_hsi.h: Broadcom Everest network driver.
*
- * Copyright (c) 2007 Broadcom Corporation
+ * Copyright (c) 2007-2008 Broadcom Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -8,169 +8,9 @@
*/
-#define FUNC_0 0
-#define FUNC_1 1
-#define FUNC_MAX 2
-
-
-/* This value (in milliseconds) determines the frequency of the driver
- * issuing the PULSE message code. The firmware monitors this periodic
- * pulse to determine when to switch to an OS-absent mode. */
-#define DRV_PULSE_PERIOD_MS 250
-
-/* This value (in milliseconds) determines how long the driver should
- * wait for an acknowledgement from the firmware before timing out. Once
- * the firmware has timed out, the driver will assume there is no firmware
- * running and there won't be any firmware-driver synchronization during a
- * driver reset. */
-#define FW_ACK_TIME_OUT_MS 5000
-
-#define FW_ACK_POLL_TIME_MS 1
-
-#define FW_ACK_NUM_OF_POLL (FW_ACK_TIME_OUT_MS/FW_ACK_POLL_TIME_MS)
-
-/* LED Blink rate that will achieve ~15.9Hz */
-#define LED_BLINK_RATE_VAL 480
-
-/****************************************************************************
- * Driver <-> FW Mailbox *
- ****************************************************************************/
-struct drv_fw_mb {
- u32 drv_mb_header;
-#define DRV_MSG_CODE_MASK 0xffff0000
-#define DRV_MSG_CODE_LOAD_REQ 0x10000000
-#define DRV_MSG_CODE_LOAD_DONE 0x11000000
-#define DRV_MSG_CODE_UNLOAD_REQ_WOL_EN 0x20000000
-#define DRV_MSG_CODE_UNLOAD_REQ_WOL_DIS 0x20010000
-#define DRV_MSG_CODE_UNLOAD_REQ_WOL_MCP 0x20020000
-#define DRV_MSG_CODE_UNLOAD_DONE 0x21000000
-#define DRV_MSG_CODE_DIAG_ENTER_REQ 0x50000000
-#define DRV_MSG_CODE_DIAG_EXIT_REQ 0x60000000
-#define DRV_MSG_CODE_VALIDATE_KEY 0x70000000
-#define DRV_MSG_CODE_GET_CURR_KEY 0x80000000
-#define DRV_MSG_CODE_GET_UPGRADE_KEY 0x81000000
-#define DRV_MSG_CODE_GET_MANUF_KEY 0x82000000
-#define DRV_MSG_CODE_LOAD_L2B_PRAM 0x90000000
-
-#define DRV_MSG_SEQ_NUMBER_MASK 0x0000ffff
-
- u32 drv_mb_param;
-
- u32 fw_mb_header;
-#define FW_MSG_CODE_MASK 0xffff0000
-#define FW_MSG_CODE_DRV_LOAD_COMMON 0x11000000
-#define FW_MSG_CODE_DRV_LOAD_PORT 0x12000000
-#define FW_MSG_CODE_DRV_LOAD_REFUSED 0x13000000
-#define FW_MSG_CODE_DRV_LOAD_DONE 0x14000000
-#define FW_MSG_CODE_DRV_UNLOAD_COMMON 0x21000000
-#define FW_MSG_CODE_DRV_UNLOAD_PORT 0x22000000
-#define FW_MSG_CODE_DRV_UNLOAD_DONE 0x23000000
-#define FW_MSG_CODE_DIAG_ENTER_DONE 0x50000000
-#define FW_MSG_CODE_DIAG_REFUSE 0x51000000
-#define FW_MSG_CODE_VALIDATE_KEY_SUCCESS 0x70000000
-#define FW_MSG_CODE_VALIDATE_KEY_FAILURE 0x71000000
-#define FW_MSG_CODE_GET_KEY_DONE 0x80000000
-#define FW_MSG_CODE_NO_KEY 0x8f000000
-#define FW_MSG_CODE_LIC_INFO_NOT_READY 0x8f800000
-#define FW_MSG_CODE_L2B_PRAM_LOADED 0x90000000
-#define FW_MSG_CODE_L2B_PRAM_T_LOAD_FAILURE 0x91000000
-#define FW_MSG_CODE_L2B_PRAM_C_LOAD_FAILURE 0x92000000
-#define FW_MSG_CODE_L2B_PRAM_X_LOAD_FAILURE 0x93000000
-#define FW_MSG_CODE_L2B_PRAM_U_LOAD_FAILURE 0x94000000
-
-#define FW_MSG_SEQ_NUMBER_MASK 0x0000ffff
-
- u32 fw_mb_param;
-
- u32 link_status;
- /* Driver should update this field on any link change event */
-
-#define LINK_STATUS_LINK_FLAG_MASK 0x00000001
-#define LINK_STATUS_LINK_UP 0x00000001
-#define LINK_STATUS_SPEED_AND_DUPLEX_MASK 0x0000001E
-#define LINK_STATUS_SPEED_AND_DUPLEX_AN_NOT_COMPLETE (0<<1)
-#define LINK_STATUS_SPEED_AND_DUPLEX_10THD (1<<1)
-#define LINK_STATUS_SPEED_AND_DUPLEX_10TFD (2<<1)
-#define LINK_STATUS_SPEED_AND_DUPLEX_100TXHD (3<<1)
-#define LINK_STATUS_SPEED_AND_DUPLEX_100T4 (4<<1)
-#define LINK_STATUS_SPEED_AND_DUPLEX_100TXFD (5<<1)
-#define LINK_STATUS_SPEED_AND_DUPLEX_1000THD (6<<1)
-#define LINK_STATUS_SPEED_AND_DUPLEX_1000TFD (7<<1)
-#define LINK_STATUS_SPEED_AND_DUPLEX_1000XFD (7<<1)
-#define LINK_STATUS_SPEED_AND_DUPLEX_2500THD (8<<1)
-#define LINK_STATUS_SPEED_AND_DUPLEX_2500TFD (9<<1)
-#define LINK_STATUS_SPEED_AND_DUPLEX_2500XFD (9<<1)
-#define LINK_STATUS_SPEED_AND_DUPLEX_10GTFD (10<<1)
-#define LINK_STATUS_SPEED_AND_DUPLEX_10GXFD (10<<1)
-#define LINK_STATUS_SPEED_AND_DUPLEX_12GTFD (11<<1)
-#define LINK_STATUS_SPEED_AND_DUPLEX_12GXFD (11<<1)
-#define LINK_STATUS_SPEED_AND_DUPLEX_12_5GTFD (12<<1)
-#define LINK_STATUS_SPEED_AND_DUPLEX_12_5GXFD (12<<1)
-#define LINK_STATUS_SPEED_AND_DUPLEX_13GTFD (13<<1)
-#define LINK_STATUS_SPEED_AND_DUPLEX_13GXFD (13<<1)
-#define LINK_STATUS_SPEED_AND_DUPLEX_15GTFD (14<<1)
-#define LINK_STATUS_SPEED_AND_DUPLEX_15GXFD (14<<1)
-#define LINK_STATUS_SPEED_AND_DUPLEX_16GTFD (15<<1)
-#define LINK_STATUS_SPEED_AND_DUPLEX_16GXFD (15<<1)
-
-#define LINK_STATUS_AUTO_NEGOTIATE_FLAG_MASK 0x00000020
-#define LINK_STATUS_AUTO_NEGOTIATE_ENABLED 0x00000020
-
-#define LINK_STATUS_AUTO_NEGOTIATE_COMPLETE 0x00000040
-#define LINK_STATUS_PARALLEL_DETECTION_FLAG_MASK 0x00000080
-#define LINK_STATUS_PARALLEL_DETECTION_USED 0x00000080
-
-#define LINK_STATUS_LINK_PARTNER_1000TFD_CAPABLE 0x00000200
-#define LINK_STATUS_LINK_PARTNER_1000THD_CAPABLE 0x00000400
-#define LINK_STATUS_LINK_PARTNER_100T4_CAPABLE 0x00000800
-#define LINK_STATUS_LINK_PARTNER_100TXFD_CAPABLE 0x00001000
-#define LINK_STATUS_LINK_PARTNER_100TXHD_CAPABLE 0x00002000
-#define LINK_STATUS_LINK_PARTNER_10TFD_CAPABLE 0x00004000
-#define LINK_STATUS_LINK_PARTNER_10THD_CAPABLE 0x00008000
-
-#define LINK_STATUS_TX_FLOW_CONTROL_FLAG_MASK 0x00010000
-#define LINK_STATUS_TX_FLOW_CONTROL_ENABLED 0x00010000
-
-#define LINK_STATUS_RX_FLOW_CONTROL_FLAG_MASK 0x00020000
-#define LINK_STATUS_RX_FLOW_CONTROL_ENABLED 0x00020000
-
-#define LINK_STATUS_LINK_PARTNER_FLOW_CONTROL_MASK 0x000C0000
-#define LINK_STATUS_LINK_PARTNER_NOT_PAUSE_CAPABLE (0<<18)
-#define LINK_STATUS_LINK_PARTNER_SYMMETRIC_PAUSE (1<<18)
-#define LINK_STATUS_LINK_PARTNER_ASYMMETRIC_PAUSE (2<<18)
-#define LINK_STATUS_LINK_PARTNER_BOTH_PAUSE (3<<18)
-
-#define LINK_STATUS_SERDES_LINK 0x00100000
-
-#define LINK_STATUS_LINK_PARTNER_2500XFD_CAPABLE 0x00200000
-#define LINK_STATUS_LINK_PARTNER_2500XHD_CAPABLE 0x00400000
-#define LINK_STATUS_LINK_PARTNER_10GXFD_CAPABLE 0x00800000
-#define LINK_STATUS_LINK_PARTNER_12GXFD_CAPABLE 0x01000000
-#define LINK_STATUS_LINK_PARTNER_12_5GXFD_CAPABLE 0x02000000
-#define LINK_STATUS_LINK_PARTNER_13GXFD_CAPABLE 0x04000000
-#define LINK_STATUS_LINK_PARTNER_15GXFD_CAPABLE 0x08000000
-#define LINK_STATUS_LINK_PARTNER_16GXFD_CAPABLE 0x10000000
-
- u32 drv_pulse_mb;
-#define DRV_PULSE_SEQ_MASK 0x00007fff
-#define DRV_PULSE_SYSTEM_TIME_MASK 0xffff0000
- /* The system time is in the format of
- * (year-2001)*12*32 + month*32 + day. */
-#define DRV_PULSE_ALWAYS_ALIVE 0x00008000
- /* Indicate to the firmware not to go into the
- * OS-absent when it is not getting driver pulse.
- * This is used for debugging as well for PXE(MBA). */
-
- u32 mcp_pulse_mb;
-#define MCP_PULSE_SEQ_MASK 0x00007fff
-#define MCP_PULSE_ALWAYS_ALIVE 0x00008000
- /* Indicates to the driver not to assert due to lack
- * of MCP response */
-#define MCP_EVENT_MASK 0xffff0000
-#define MCP_EVENT_OTHER_DRIVER_RESET_REQ 0x00010000
-
-};
-
+#define PORT_0 0
+#define PORT_1 1
+#define PORT_MAX 2
/****************************************************************************
* Shared HW configuration *
@@ -249,7 +89,7 @@ struct shared_hw_cfg { /* NVRAM Offset */
#define SHARED_HW_CFG_SMBUS_TIMING_100KHZ 0x00000000
#define SHARED_HW_CFG_SMBUS_TIMING_400KHZ 0x00001000
-#define SHARED_HW_CFG_HIDE_FUNC1 0x00002000
+#define SHARED_HW_CFG_HIDE_PORT1 0x00002000
u32 power_dissipated; /* 0x11c */
#define SHARED_HW_CFG_POWER_DIS_CMN_MASK 0xff000000
@@ -290,6 +130,8 @@ struct shared_hw_cfg { /* NVRAM Offset */
#define SHARED_HW_CFG_BOARD_TYPE_BCM957710T1015G 0x00000006
#define SHARED_HW_CFG_BOARD_TYPE_BCM957710A1020G 0x00000007
#define SHARED_HW_CFG_BOARD_TYPE_BCM957710T1003G 0x00000008
+#define SHARED_HW_CFG_BOARD_TYPE_BCM957710A1022G 0x00000009
+#define SHARED_HW_CFG_BOARD_TYPE_BCM957710A1021G 0x0000000a
#define SHARED_HW_CFG_BOARD_VER_MASK 0xffff0000
#define SHARED_HW_CFG_BOARD_VER_SHIFT 16
@@ -304,13 +146,12 @@ struct shared_hw_cfg { /* NVRAM Offset */
};
+
/****************************************************************************
* Port HW configuration *
****************************************************************************/
-struct port_hw_cfg { /* function 0: 0x12c-0x2bb, function 1: 0x2bc-0x44b */
+struct port_hw_cfg { /* port 0: 0x12c port 1: 0x2bc */
- /* Fields below are port specific (in anticipation of dual port
- devices */
u32 pci_id;
#define PORT_HW_CFG_PCI_VENDOR_ID_MASK 0xffff0000
#define PORT_HW_CFG_PCI_DEVICE_ID_MASK 0x0000ffff
@@ -420,6 +261,8 @@ struct port_hw_cfg { /* function 0: 0x12c-0x2bb, function 1: 0x2bc-0x44b */
#define PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8706 0x00000500
#define PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8276 0x00000600
#define PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8481 0x00000700
+#define PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101 0x00000800
+#define PORT_HW_CFG_XGXS_EXT_PHY_TYPE_FAILURE 0x0000fd00
#define PORT_HW_CFG_XGXS_EXT_PHY_TYPE_NOT_CONN 0x0000ff00
#define PORT_HW_CFG_XGXS_EXT_PHY_ADDR_MASK 0x000000ff
@@ -462,11 +305,13 @@ struct port_hw_cfg { /* function 0: 0x12c-0x2bb, function 1: 0x2bc-0x44b */
};
+
/****************************************************************************
* Shared Feature configuration *
****************************************************************************/
struct shared_feat_cfg { /* NVRAM Offset */
- u32 bmc_common; /* 0x450 */
+
+ u32 config; /* 0x450 */
#define SHARED_FEATURE_BMC_ECHO_MODE_EN 0x00000001
};
@@ -475,7 +320,8 @@ struct shared_feat_cfg { /* NVRAM Offset */
/****************************************************************************
* Port Feature configuration *
****************************************************************************/
-struct port_feat_cfg { /* function 0: 0x454-0x4c7, function 1: 0x4c8-0x53b */
+struct port_feat_cfg { /* port 0: 0x454 port 1: 0x4c8 */
+
u32 config;
#define PORT_FEATURE_BAR1_SIZE_MASK 0x0000000f
#define PORT_FEATURE_BAR1_SIZE_SHIFT 0
@@ -609,8 +455,7 @@ struct port_feat_cfg { /* function 0: 0x454-0x4c7, function 1: 0x4c8-0x53b */
#define PORT_FEATURE_SMBUS_ADDR_MASK 0x000000fe
#define PORT_FEATURE_SMBUS_ADDR_SHIFT 1
- u32 iscsib_boot_cfg;
-#define PORT_FEATURE_ISCSIB_SKIP_TARGET_BOOT 0x00000001
+ u32 reserved1;
u32 link_config; /* Used as HW defaults for the driver */
#define PORT_FEATURE_CONNECTED_SWITCH_MASK 0x03000000
@@ -657,20 +502,201 @@ struct port_feat_cfg { /* function 0: 0x454-0x4c7, function 1: 0x4c8-0x53b */
};
+/*****************************************************************************
+ * Device Information *
+ *****************************************************************************/
+struct dev_info { /* size */
+
+ u32 bc_rev; /* 8 bits each: major, minor, build */ /* 4 */
+
+ struct shared_hw_cfg shared_hw_config; /* 40 */
+
+ struct port_hw_cfg port_hw_config[PORT_MAX]; /* 400*2=800 */
+
+ struct shared_feat_cfg shared_feature_config; /* 4 */
+
+ struct port_feat_cfg port_feature_config[PORT_MAX]; /* 116*2=232 */
+
+};
+
+
+#define FUNC_0 0
+#define FUNC_1 1
+#define E1_FUNC_MAX 2
+#define FUNC_MAX E1_FUNC_MAX
+
+
+/* This value (in milliseconds) determines the frequency of the driver
+ * issuing the PULSE message code. The firmware monitors this periodic
+ * pulse to determine when to switch to an OS-absent mode. */
+#define DRV_PULSE_PERIOD_MS 250
+
+/* This value (in milliseconds) determines how long the driver should
+ * wait for an acknowledgement from the firmware before timing out. Once
+ * the firmware has timed out, the driver will assume there is no firmware
+ * running and there won't be any firmware-driver synchronization during a
+ * driver reset. */
+#define FW_ACK_TIME_OUT_MS 5000
+
+#define FW_ACK_POLL_TIME_MS 1
+
+#define FW_ACK_NUM_OF_POLL (FW_ACK_TIME_OUT_MS/FW_ACK_POLL_TIME_MS)
+
+/* LED Blink rate that will achieve ~15.9Hz */
+#define LED_BLINK_RATE_VAL 480
+
/****************************************************************************
- * Device Information *
+ * Driver <-> FW Mailbox *
****************************************************************************/
-struct dev_info { /* size */
+struct drv_port_mb {
+
+ u32 link_status;
+ /* Driver should update this field on any link change event */
+
+#define LINK_STATUS_LINK_FLAG_MASK 0x00000001
+#define LINK_STATUS_LINK_UP 0x00000001
+#define LINK_STATUS_SPEED_AND_DUPLEX_MASK 0x0000001E
+#define LINK_STATUS_SPEED_AND_DUPLEX_AN_NOT_COMPLETE (0<<1)
+#define LINK_STATUS_SPEED_AND_DUPLEX_10THD (1<<1)
+#define LINK_STATUS_SPEED_AND_DUPLEX_10TFD (2<<1)
+#define LINK_STATUS_SPEED_AND_DUPLEX_100TXHD (3<<1)
+#define LINK_STATUS_SPEED_AND_DUPLEX_100T4 (4<<1)
+#define LINK_STATUS_SPEED_AND_DUPLEX_100TXFD (5<<1)
+#define LINK_STATUS_SPEED_AND_DUPLEX_1000THD (6<<1)
+#define LINK_STATUS_SPEED_AND_DUPLEX_1000TFD (7<<1)
+#define LINK_STATUS_SPEED_AND_DUPLEX_1000XFD (7<<1)
+#define LINK_STATUS_SPEED_AND_DUPLEX_2500THD (8<<1)
+#define LINK_STATUS_SPEED_AND_DUPLEX_2500TFD (9<<1)
+#define LINK_STATUS_SPEED_AND_DUPLEX_2500XFD (9<<1)
+#define LINK_STATUS_SPEED_AND_DUPLEX_10GTFD (10<<1)
+#define LINK_STATUS_SPEED_AND_DUPLEX_10GXFD (10<<1)
+#define LINK_STATUS_SPEED_AND_DUPLEX_12GTFD (11<<1)
+#define LINK_STATUS_SPEED_AND_DUPLEX_12GXFD (11<<1)
+#define LINK_STATUS_SPEED_AND_DUPLEX_12_5GTFD (12<<1)
+#define LINK_STATUS_SPEED_AND_DUPLEX_12_5GXFD (12<<1)
+#define LINK_STATUS_SPEED_AND_DUPLEX_13GTFD (13<<1)
+#define LINK_STATUS_SPEED_AND_DUPLEX_13GXFD (13<<1)
+#define LINK_STATUS_SPEED_AND_DUPLEX_15GTFD (14<<1)
+#define LINK_STATUS_SPEED_AND_DUPLEX_15GXFD (14<<1)
+#define LINK_STATUS_SPEED_AND_DUPLEX_16GTFD (15<<1)
+#define LINK_STATUS_SPEED_AND_DUPLEX_16GXFD (15<<1)
+
+#define LINK_STATUS_AUTO_NEGOTIATE_FLAG_MASK 0x00000020
+#define LINK_STATUS_AUTO_NEGOTIATE_ENABLED 0x00000020
+
+#define LINK_STATUS_AUTO_NEGOTIATE_COMPLETE 0x00000040
+#define LINK_STATUS_PARALLEL_DETECTION_FLAG_MASK 0x00000080
+#define LINK_STATUS_PARALLEL_DETECTION_USED 0x00000080
+
+#define LINK_STATUS_LINK_PARTNER_1000TFD_CAPABLE 0x00000200
+#define LINK_STATUS_LINK_PARTNER_1000THD_CAPABLE 0x00000400
+#define LINK_STATUS_LINK_PARTNER_100T4_CAPABLE 0x00000800
+#define LINK_STATUS_LINK_PARTNER_100TXFD_CAPABLE 0x00001000
+#define LINK_STATUS_LINK_PARTNER_100TXHD_CAPABLE 0x00002000
+#define LINK_STATUS_LINK_PARTNER_10TFD_CAPABLE 0x00004000
+#define LINK_STATUS_LINK_PARTNER_10THD_CAPABLE 0x00008000
+
+#define LINK_STATUS_TX_FLOW_CONTROL_FLAG_MASK 0x00010000
+#define LINK_STATUS_TX_FLOW_CONTROL_ENABLED 0x00010000
+
+#define LINK_STATUS_RX_FLOW_CONTROL_FLAG_MASK 0x00020000
+#define LINK_STATUS_RX_FLOW_CONTROL_ENABLED 0x00020000
+
+#define LINK_STATUS_LINK_PARTNER_FLOW_CONTROL_MASK 0x000C0000
+#define LINK_STATUS_LINK_PARTNER_NOT_PAUSE_CAPABLE (0<<18)
+#define LINK_STATUS_LINK_PARTNER_SYMMETRIC_PAUSE (1<<18)
+#define LINK_STATUS_LINK_PARTNER_ASYMMETRIC_PAUSE (2<<18)
+#define LINK_STATUS_LINK_PARTNER_BOTH_PAUSE (3<<18)
+
+#define LINK_STATUS_SERDES_LINK 0x00100000
+
+#define LINK_STATUS_LINK_PARTNER_2500XFD_CAPABLE 0x00200000
+#define LINK_STATUS_LINK_PARTNER_2500XHD_CAPABLE 0x00400000
+#define LINK_STATUS_LINK_PARTNER_10GXFD_CAPABLE 0x00800000
+#define LINK_STATUS_LINK_PARTNER_12GXFD_CAPABLE 0x01000000
+#define LINK_STATUS_LINK_PARTNER_12_5GXFD_CAPABLE 0x02000000
+#define LINK_STATUS_LINK_PARTNER_13GXFD_CAPABLE 0x04000000
+#define LINK_STATUS_LINK_PARTNER_15GXFD_CAPABLE 0x08000000
+#define LINK_STATUS_LINK_PARTNER_16GXFD_CAPABLE 0x10000000
- u32 bc_rev; /* 8 bits each: major, minor, build */ /* 4 */
+ u32 reserved[3];
- struct shared_hw_cfg shared_hw_config; /* 40 */
+};
+
+
+struct drv_func_mb {
+
+ u32 drv_mb_header;
+#define DRV_MSG_CODE_MASK 0xffff0000
+#define DRV_MSG_CODE_LOAD_REQ 0x10000000
+#define DRV_MSG_CODE_LOAD_DONE 0x11000000
+#define DRV_MSG_CODE_UNLOAD_REQ_WOL_EN 0x20000000
+#define DRV_MSG_CODE_UNLOAD_REQ_WOL_DIS 0x20010000
+#define DRV_MSG_CODE_UNLOAD_REQ_WOL_MCP 0x20020000
+#define DRV_MSG_CODE_UNLOAD_DONE 0x21000000
+#define DRV_MSG_CODE_DIAG_ENTER_REQ 0x50000000
+#define DRV_MSG_CODE_DIAG_EXIT_REQ 0x60000000
+#define DRV_MSG_CODE_VALIDATE_KEY 0x70000000
+#define DRV_MSG_CODE_GET_CURR_KEY 0x80000000
+#define DRV_MSG_CODE_GET_UPGRADE_KEY 0x81000000
+#define DRV_MSG_CODE_GET_MANUF_KEY 0x82000000
+#define DRV_MSG_CODE_LOAD_L2B_PRAM 0x90000000
+
+#define DRV_MSG_SEQ_NUMBER_MASK 0x0000ffff
+
+ u32 drv_mb_param;
+
+ u32 fw_mb_header;
+#define FW_MSG_CODE_MASK 0xffff0000
+#define FW_MSG_CODE_DRV_LOAD_COMMON 0x10100000
+#define FW_MSG_CODE_DRV_LOAD_PORT 0x10110000
+#define FW_MSG_CODE_DRV_LOAD_FUNCTION 0x10120000
+#define FW_MSG_CODE_DRV_LOAD_REFUSED 0x10200000
+#define FW_MSG_CODE_DRV_LOAD_DONE 0x11100000
+#define FW_MSG_CODE_DRV_UNLOAD_COMMON 0x20100000
+#define FW_MSG_CODE_DRV_UNLOAD_PORT 0x20110000
+#define FW_MSG_CODE_DRV_UNLOAD_FUNCTION 0x20120000
+#define FW_MSG_CODE_DRV_UNLOAD_DONE 0x21100000
+#define FW_MSG_CODE_DIAG_ENTER_DONE 0x50100000
+#define FW_MSG_CODE_DIAG_REFUSE 0x50200000
+#define FW_MSG_CODE_DIAG_EXIT_DONE 0x60100000
+#define FW_MSG_CODE_VALIDATE_KEY_SUCCESS 0x70100000
+#define FW_MSG_CODE_VALIDATE_KEY_FAILURE 0x70200000
+#define FW_MSG_CODE_GET_KEY_DONE 0x80100000
+#define FW_MSG_CODE_NO_KEY 0x80f00000
+#define FW_MSG_CODE_LIC_INFO_NOT_READY 0x80f80000
+#define FW_MSG_CODE_L2B_PRAM_LOADED 0x90100000
+#define FW_MSG_CODE_L2B_PRAM_T_LOAD_FAILURE 0x90210000
+#define FW_MSG_CODE_L2B_PRAM_C_LOAD_FAILURE 0x90220000
+#define FW_MSG_CODE_L2B_PRAM_X_LOAD_FAILURE 0x90230000
+#define FW_MSG_CODE_L2B_PRAM_U_LOAD_FAILURE 0x90240000
+
+#define FW_MSG_SEQ_NUMBER_MASK 0x0000ffff
+
+ u32 fw_mb_param;
+
+ u32 drv_pulse_mb;
+#define DRV_PULSE_SEQ_MASK 0x00007fff
+#define DRV_PULSE_SYSTEM_TIME_MASK 0xffff0000
+ /* The system time is in the format of
+ * (year-2001)*12*32 + month*32 + day. */
+#define DRV_PULSE_ALWAYS_ALIVE 0x00008000
+ /* Indicate to the firmware not to go into the
+ * OS-absent when it is not getting driver pulse.
+ * This is used for debugging as well for PXE(MBA). */
- struct port_hw_cfg port_hw_config[FUNC_MAX]; /* 400*2=800 */
+ u32 mcp_pulse_mb;
+#define MCP_PULSE_SEQ_MASK 0x00007fff
+#define MCP_PULSE_ALWAYS_ALIVE 0x00008000
+ /* Indicates to the driver not to assert due to lack
+ * of MCP response */
+#define MCP_EVENT_MASK 0xffff0000
+#define MCP_EVENT_OTHER_DRIVER_RESET_REQ 0x00010000
- struct shared_feat_cfg shared_feature_config; /* 4 */
+ u32 iscsi_boot_signature;
+ u32 iscsi_boot_block_offset;
- struct port_feat_cfg port_feature_config[FUNC_MAX];/* 116*2=232 */
+ u32 reserved[3];
};
@@ -678,9 +704,8 @@ struct dev_info { /* size */
/****************************************************************************
* Management firmware state *
****************************************************************************/
-/* Allocate 320 bytes for management firmware: still not known exactly
- * how much IMD needs. */
-#define MGMTFW_STATE_WORD_SIZE 80
+/* Allocate 440 bytes for management firmware */
+#define MGMTFW_STATE_WORD_SIZE 110
struct mgmtfw_state {
u32 opaque[MGMTFW_STATE_WORD_SIZE];
@@ -691,31 +716,40 @@ struct mgmtfw_state {
* Shared Memory Region *
****************************************************************************/
struct shmem_region { /* SharedMem Offset (size) */
- u32 validity_map[FUNC_MAX]; /* 0x0 (4 * 2 = 0x8) */
-#define SHR_MEM_VALIDITY_PCI_CFG 0x00000001
-#define SHR_MEM_VALIDITY_MB 0x00000002
-#define SHR_MEM_VALIDITY_DEV_INFO 0x00000004
+
+ u32 validity_map[PORT_MAX]; /* 0x0 (4*2 = 0x8) */
+#define SHR_MEM_FORMAT_REV_ID ('A'<<24)
+#define SHR_MEM_FORMAT_REV_MASK 0xff000000
+ /* validity bits */
+#define SHR_MEM_VALIDITY_PCI_CFG 0x00100000
+#define SHR_MEM_VALIDITY_MB 0x00200000
+#define SHR_MEM_VALIDITY_DEV_INFO 0x00400000
+#define SHR_MEM_VALIDITY_RESERVED 0x00000007
/* One licensing bit should be set */
#define SHR_MEM_VALIDITY_LIC_KEY_IN_EFFECT_MASK 0x00000038
#define SHR_MEM_VALIDITY_LIC_MANUF_KEY_IN_EFFECT 0x00000008
#define SHR_MEM_VALIDITY_LIC_UPGRADE_KEY_IN_EFFECT 0x00000010
#define SHR_MEM_VALIDITY_LIC_NO_KEY_IN_EFFECT 0x00000020
+ /* Active MFW */
+#define SHR_MEM_VALIDITY_ACTIVE_MFW_UNKNOWN 0x00000000
+#define SHR_MEM_VALIDITY_ACTIVE_MFW_IPMI 0x00000040
+#define SHR_MEM_VALIDITY_ACTIVE_MFW_UMP 0x00000080
+#define SHR_MEM_VALIDITY_ACTIVE_MFW_NCSI 0x000000c0
+#define SHR_MEM_VALIDITY_ACTIVE_MFW_NONE 0x000001c0
+#define SHR_MEM_VALIDITY_ACTIVE_MFW_MASK 0x000001c0
- struct drv_fw_mb drv_fw_mb[FUNC_MAX]; /* 0x8 (28 * 2 = 0x38) */
-
- struct dev_info dev_info; /* 0x40 (0x438) */
+ struct dev_info dev_info; /* 0x8 (0x438) */
-#ifdef _LICENSE_H
- license_key_t drv_lic_key[FUNC_MAX]; /* 0x478 (52 * 2 = 0x68) */
-#else /* Linux! */
- u8 reserved[52*FUNC_MAX];
-#endif
+ u8 reserved[52*PORT_MAX];
/* FW information (for internal FW use) */
- u32 fw_info_fio_offset; /* 0x4e0 (0x4) */
- struct mgmtfw_state mgmtfw_state; /* 0x4e4 (0x140) */
+ u32 fw_info_fio_offset; /* 0x4a8 (0x4) */
+ struct mgmtfw_state mgmtfw_state; /* 0x4ac (0x1b8) */
+
+ struct drv_port_mb port_mb[PORT_MAX]; /* 0x664 (16*2=0x20) */
+ struct drv_func_mb func_mb[FUNC_MAX]; /* 0x684 (44*2=0x58) */
-}; /* 0x624 */
+}; /* 0x6dc */
#define BCM_5710_FW_MAJOR_VERSION 4
diff --git a/drivers/net/bnx2x_reg.h b/drivers/net/bnx2x_reg.h
index 86055297ab0..5a1aa0b5504 100644
--- a/drivers/net/bnx2x_reg.h
+++ b/drivers/net/bnx2x_reg.h
@@ -1,6 +1,6 @@
/* bnx2x_reg.h: Broadcom Everest network driver.
*
- * Copyright (c) 2007 Broadcom Corporation
+ * Copyright (c) 2007-2008 Broadcom Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -24,6 +24,8 @@
#define BRB1_REG_BRB1_INT_STS 0x6011c
/* [RW 4] Parity mask register #0 read/write */
#define BRB1_REG_BRB1_PRTY_MASK 0x60138
+/* [R 4] Parity register #0 read */
+#define BRB1_REG_BRB1_PRTY_STS 0x6012c
/* [RW 10] At address BRB1_IND_FREE_LIST_PRS_CRDT initialize free head. At
address BRB1_IND_FREE_LIST_PRS_CRDT+1 initialize free tail. At address
BRB1_IND_FREE_LIST_PRS_CRDT+2 initialize parser initial credit. */
@@ -281,6 +283,8 @@
#define CDU_REG_CDU_INT_STS 0x101030
/* [RW 5] Parity mask register #0 read/write */
#define CDU_REG_CDU_PRTY_MASK 0x10104c
+/* [R 5] Parity register #0 read */
+#define CDU_REG_CDU_PRTY_STS 0x101040
/* [RC 32] logging of error data in case of a CDU load error:
{expected_cid[15:0]; xpected_type[2:0]; xpected_region[2:0]; ctive_error;
ype_error; ctual_active; ctual_compressed_context}; */
@@ -308,6 +312,8 @@
#define CFC_REG_CFC_INT_STS_CLR 0x104100
/* [RW 4] Parity mask register #0 read/write */
#define CFC_REG_CFC_PRTY_MASK 0x104118
+/* [R 4] Parity register #0 read */
+#define CFC_REG_CFC_PRTY_STS 0x10410c
/* [RW 21] CID cam access (21:1 - Data; alid - 0) */
#define CFC_REG_CID_CAM 0x104800
#define CFC_REG_CONTROL0 0x104028
@@ -354,6 +360,8 @@
#define CSDM_REG_CSDM_INT_MASK_1 0xc22ac
/* [RW 11] Parity mask register #0 read/write */
#define CSDM_REG_CSDM_PRTY_MASK 0xc22bc
+/* [R 11] Parity register #0 read */
+#define CSDM_REG_CSDM_PRTY_STS 0xc22b0
#define CSDM_REG_ENABLE_IN1 0xc2238
#define CSDM_REG_ENABLE_IN2 0xc223c
#define CSDM_REG_ENABLE_OUT1 0xc2240
@@ -438,6 +446,9 @@
/* [RW 32] Parity mask register #0 read/write */
#define CSEM_REG_CSEM_PRTY_MASK_0 0x200130
#define CSEM_REG_CSEM_PRTY_MASK_1 0x200140
+/* [R 32] Parity register #0 read */
+#define CSEM_REG_CSEM_PRTY_STS_0 0x200124
+#define CSEM_REG_CSEM_PRTY_STS_1 0x200134
#define CSEM_REG_ENABLE_IN 0x2000a4
#define CSEM_REG_ENABLE_OUT 0x2000a8
/* [RW 32] This address space contains all registers and memories that are
@@ -526,6 +537,8 @@
#define CSEM_REG_TS_9_AS 0x20005c
/* [RW 1] Parity mask register #0 read/write */
#define DBG_REG_DBG_PRTY_MASK 0xc0a8
+/* [R 1] Parity register #0 read */
+#define DBG_REG_DBG_PRTY_STS 0xc09c
/* [RW 2] debug only: These bits indicate the credit for PCI request type 4
interface; MUST be configured AFTER pci_ext_buffer_strt_addr_lsb/msb are
configured */
@@ -543,6 +556,8 @@
#define DMAE_REG_DMAE_INT_MASK 0x102054
/* [RW 4] Parity mask register #0 read/write */
#define DMAE_REG_DMAE_PRTY_MASK 0x102064
+/* [R 4] Parity register #0 read */
+#define DMAE_REG_DMAE_PRTY_STS 0x102058
/* [RW 1] Command 0 go. */
#define DMAE_REG_GO_C0 0x102080
/* [RW 1] Command 1 go. */
@@ -623,6 +638,8 @@
#define DORQ_REG_DORQ_INT_STS_CLR 0x170178
/* [RW 2] Parity mask register #0 read/write */
#define DORQ_REG_DORQ_PRTY_MASK 0x170190
+/* [R 2] Parity register #0 read */
+#define DORQ_REG_DORQ_PRTY_STS 0x170184
/* [RW 8] The address to write the DPM CID to STORM. */
#define DORQ_REG_DPM_CID_ADDR 0x170044
/* [RW 5] The DPM mode CID extraction offset. */
@@ -692,6 +709,8 @@
#define HC_REG_CONFIG_1 0x108004
/* [RW 3] Parity mask register #0 read/write */
#define HC_REG_HC_PRTY_MASK 0x1080a0
+/* [R 3] Parity register #0 read */
+#define HC_REG_HC_PRTY_STS 0x108094
/* [RW 17] status block interrupt mask; one in each bit means unmask; zerow
in each bit means mask; bit 0 - default SB; bit 1 - SB_0; bit 2 - SB_1...
bit 16- SB_15; addr 0 - port 0; addr 1 - port 1 */
@@ -1127,6 +1146,7 @@
#define MISC_REG_AEU_GENERAL_ATTN_17 0xa044
#define MISC_REG_AEU_GENERAL_ATTN_18 0xa048
#define MISC_REG_AEU_GENERAL_ATTN_19 0xa04c
+#define MISC_REG_AEU_GENERAL_ATTN_10 0xa028
#define MISC_REG_AEU_GENERAL_ATTN_11 0xa02c
#define MISC_REG_AEU_GENERAL_ATTN_2 0xa008
#define MISC_REG_AEU_GENERAL_ATTN_20 0xa050
@@ -1135,6 +1155,9 @@
#define MISC_REG_AEU_GENERAL_ATTN_4 0xa010
#define MISC_REG_AEU_GENERAL_ATTN_5 0xa014
#define MISC_REG_AEU_GENERAL_ATTN_6 0xa018
+#define MISC_REG_AEU_GENERAL_ATTN_7 0xa01c
+#define MISC_REG_AEU_GENERAL_ATTN_8 0xa020
+#define MISC_REG_AEU_GENERAL_ATTN_9 0xa024
/* [RW 32] first 32b for inverting the input for function 0; for each bit:
0= do not invert; 1= invert; mapped as follows: [0] NIG attention for
function0; [1] NIG attention for function1; [2] GPIO1 mcp; [3] GPIO2 mcp;
@@ -1183,6 +1206,40 @@
starts at 0x0 for the A0 tape-out and increments by one for each
all-layer tape-out. */
#define MISC_REG_CHIP_REV 0xa40c
+/* [RW 32] The following driver registers(1..6) represent 6 drivers and 32
+ clients. Each client can be controlled by one driver only. One in each
+ bit represent that this driver control the appropriate client (Ex: bit 5
+ is set means this driver control client number 5). addr1 = set; addr0 =
+ clear; read from both addresses will give the same result = status. write
+ to address 1 will set a request to control all the clients that their
+ appropriate bit (in the write command) is set. if the client is free (the
+ appropriate bit in all the other drivers is clear) one will be written to
+ that driver register; if the client isn't free the bit will remain zero.
+ if the appropriate bit is set (the driver request to gain control on a
+ client it already controls the ~MISC_REGISTERS_INT_STS.GENERIC_SW
+ interrupt will be asserted). write to address 0 will set a request to
+ free all the clients that their appropriate bit (in the write command) is
+ set. if the appropriate bit is clear (the driver request to free a client
+ it doesn't controls the ~MISC_REGISTERS_INT_STS.GENERIC_SW interrupt will
+ be asserted). */
+#define MISC_REG_DRIVER_CONTROL_1 0xa510
+/* [RW 32] GPIO. [31-28] FLOAT port 0; [27-24] FLOAT port 0; When any of
+ these bits is written as a '1'; the corresponding SPIO bit will turn off
+ it's drivers and become an input. This is the reset state of all GPIO
+ pins. The read value of these bits will be a '1' if that last command
+ (#SET; #CLR; or #FLOAT) for this bit was a #FLOAT. (reset value 0xff).
+ [23-20] CLR port 1; 19-16] CLR port 0; When any of these bits is written
+ as a '1'; the corresponding GPIO bit will drive low. The read value of
+ these bits will be a '1' if that last command (#SET; #CLR; or #FLOAT) for
+ this bit was a #CLR. (reset value 0). [15-12] SET port 1; 11-8] port 0;
+ SET When any of these bits is written as a '1'; the corresponding GPIO
+ bit will drive high (if it has that capability). The read value of these
+ bits will be a '1' if that last command (#SET; #CLR; or #FLOAT) for this
+ bit was a #SET. (reset value 0). [7-4] VALUE port 1; [3-0] VALUE port 0;
+ RO; These bits indicate the read value of each of the eight GPIO pins.
+ This is the result value of the pin; not the drive value. Writing these
+ bits will have not effect. */
+#define MISC_REG_GPIO 0xa490
/* [RW 1] Setting this bit enables a timer in the GRC block to timeout any
access that does not finish within
~misc_registers_grc_timout_val.grc_timeout_val cycles. When this bit is
@@ -1223,6 +1280,8 @@
#define MISC_REG_MISC_INT_MASK 0xa388
/* [RW 1] Parity mask register #0 read/write */
#define MISC_REG_MISC_PRTY_MASK 0xa398
+/* [R 1] Parity register #0 read */
+#define MISC_REG_MISC_PRTY_STS 0xa38c
/* [RW 32] 32 LSB of storm PLL first register; reset val = 0x 071d2911.
inside order of the bits is: [0] P1 divider[0] (reset value 1); [1] P1
divider[1] (reset value 0); [2] P1 divider[2] (reset value 0); [3] P1
@@ -1264,6 +1323,55 @@
/* [RW 20] 20 bit GRC address where the scratch-pad of the MCP that is
shared with the driver resides */
#define MISC_REG_SHARED_MEM_ADDR 0xa2b4
+/* [RW 32] SPIO. [31-24] FLOAT When any of these bits is written as a '1';
+ the corresponding SPIO bit will turn off it's drivers and become an
+ input. This is the reset state of all SPIO pins. The read value of these
+ bits will be a '1' if that last command (#SET; #CL; or #FLOAT) for this
+ bit was a #FLOAT. (reset value 0xff). [23-16] CLR When any of these bits
+ is written as a '1'; the corresponding SPIO bit will drive low. The read
+ value of these bits will be a '1' if that last command (#SET; #CLR; or
+#FLOAT) for this bit was a #CLR. (reset value 0). [15-8] SET When any of
+ these bits is written as a '1'; the corresponding SPIO bit will drive
+ high (if it has that capability). The read value of these bits will be a
+ '1' if that last command (#SET; #CLR; or #FLOAT) for this bit was a #SET.
+ (reset value 0). [7-0] VALUE RO; These bits indicate the read value of
+ each of the eight SPIO pins. This is the result value of the pin; not the
+ drive value. Writing these bits will have not effect. Each 8 bits field
+ is divided as follows: [0] VAUX Enable; when pulsed low; enables supply
+ from VAUX. (This is an output pin only; the FLOAT field is not applicable
+ for this pin); [1] VAUX Disable; when pulsed low; disables supply form
+ VAUX. (This is an output pin only; FLOAT field is not applicable for this
+ pin); [2] SEL_VAUX_B - Control to power switching logic. Drive low to
+ select VAUX supply. (This is an output pin only; it is not controlled by
+ the SET and CLR fields; it is controlled by the Main Power SM; the FLOAT
+ field is not applicable for this pin; only the VALUE fields is relevant -
+ it reflects the output value); [3] reserved; [4] spio_4; [5] spio_5; [6]
+ Bit 0 of UMP device ID select; read by UMP firmware; [7] Bit 1 of UMP
+ device ID select; read by UMP firmware. */
+#define MISC_REG_SPIO 0xa4fc
+/* [RW 8] These bits enable the SPIO_INTs to signals event to the IGU/MC.
+ according to the following map: [3:0] reserved; [4] spio_4 [5] spio_5;
+ [7:0] reserved */
+#define MISC_REG_SPIO_EVENT_EN 0xa2b8
+/* [RW 32] SPIO INT. [31-24] OLD_CLR Writing a '1' to these bit clears the
+ corresponding bit in the #OLD_VALUE register. This will acknowledge an
+ interrupt on the falling edge of corresponding SPIO input (reset value
+ 0). [23-16] OLD_SET Writing a '1' to these bit sets the corresponding bit
+ in the #OLD_VALUE register. This will acknowledge an interrupt on the
+ rising edge of corresponding SPIO input (reset value 0). [15-8] OLD_VALUE
+ RO; These bits indicate the old value of the SPIO input value. When the
+ ~INT_STATE bit is set; this bit indicates the OLD value of the pin such
+ that if ~INT_STATE is set and this bit is '0'; then the interrupt is due
+ to a low to high edge. If ~INT_STATE is set and this bit is '1'; then the
+ interrupt is due to a high to low edge (reset value 0). [7-0] INT_STATE
+ RO; These bits indicate the current SPIO interrupt state for each SPIO
+ pin. This bit is cleared when the appropriate #OLD_SET or #OLD_CLR
+ command bit is written. This bit is set when the SPIO input does not
+ match the current value in #OLD_VALUE (reset value 0). */
+#define MISC_REG_SPIO_INT 0xa500
+/* [RW 1] Set by the MCP to remember if one or more of the drivers is/are
+ loaded; 0-prepare; -unprepare */
+#define MISC_REG_UNPREPARED 0xa424
#define NIG_MASK_INTERRUPT_PORT0_REG_MASK_EMAC0_MISC_MI_INT (0x1<<0)
#define NIG_MASK_INTERRUPT_PORT0_REG_MASK_SERDES0_LINK_STATUS (0x1<<9)
#define NIG_MASK_INTERRUPT_PORT0_REG_MASK_XGXS0_LINK10G (0x1<<15)
@@ -1392,6 +1500,9 @@
#define NIG_REG_NIG_INGRESS_EMAC0_NO_CRC 0x10044
/* [RW 1] Input enable for RX PBF LP IF */
#define NIG_REG_PBF_LB_IN_EN 0x100b4
+/* [RW 1] Value of this register will be transmitted to port swap when
+ ~nig_registers_strap_override.strap_override =1 */
+#define NIG_REG_PORT_SWAP 0x10394
/* [RW 1] output enable for RX parser descriptor IF */
#define NIG_REG_PRS_EOP_OUT_EN 0x10104
/* [RW 1] Input enable for RX parser request IF */
@@ -1410,6 +1521,10 @@
#define NIG_REG_STAT2_BRB_OCTET 0x107e0
#define NIG_REG_STATUS_INTERRUPT_PORT0 0x10328
#define NIG_REG_STATUS_INTERRUPT_PORT1 0x1032c
+/* [RW 1] port swap mux selection. If this register equal to 0 then port
+ swap is equal to SPIO pin that inputs from ifmux_serdes_swap. If 1 then
+ ort swap is equal to ~nig_registers_port_swap.port_swap */
+#define NIG_REG_STRAP_OVERRIDE 0x10398
/* [RW 1] output enable for RX_XCM0 IF */
#define NIG_REG_XCM0_OUT_EN 0x100f0
/* [RW 1] output enable for RX_XCM1 IF */
@@ -1499,6 +1614,8 @@
#define PB_REG_PB_INT_STS 0x1c
/* [RW 4] Parity mask register #0 read/write */
#define PB_REG_PB_PRTY_MASK 0x38
+/* [R 4] Parity register #0 read */
+#define PB_REG_PB_PRTY_STS 0x2c
#define PRS_REG_A_PRSU_20 0x40134
/* [R 8] debug only: CFC load request current credit. Transaction based. */
#define PRS_REG_CFC_LD_CURRENT_CREDIT 0x40164
@@ -1590,6 +1707,8 @@
#define PRS_REG_PRS_INT_STS 0x40188
/* [RW 8] Parity mask register #0 read/write */
#define PRS_REG_PRS_PRTY_MASK 0x401a4
+/* [R 8] Parity register #0 read */
+#define PRS_REG_PRS_PRTY_STS 0x40198
/* [RW 8] Context region for pure acknowledge packets. Used in CFC load
request message */
#define PRS_REG_PURE_REGIONS 0x40024
@@ -1718,6 +1837,9 @@
/* [RW 32] Parity mask register #0 read/write */
#define PXP2_REG_PXP2_PRTY_MASK_0 0x120588
#define PXP2_REG_PXP2_PRTY_MASK_1 0x120598
+/* [R 32] Parity register #0 read */
+#define PXP2_REG_PXP2_PRTY_STS_0 0x12057c
+#define PXP2_REG_PXP2_PRTY_STS_1 0x12058c
/* [R 1] Debug only: The 'almost full' indication from each fifo (gives
indication about backpressure) */
#define PXP2_REG_RD_ALMOST_FULL_0 0x120424
@@ -1911,6 +2033,8 @@
#define PXP2_REG_RQ_HC_ENDIAN_M 0x1201a8
/* [WB 53] Onchip address table */
#define PXP2_REG_RQ_ONCHIP_AT 0x122000
+/* [RW 13] Pending read limiter threshold; in Dwords */
+#define PXP2_REG_RQ_PDR_LIMIT 0x12033c
/* [RW 2] Endian mode for qm */
#define PXP2_REG_RQ_QM_ENDIAN_M 0x120194
/* [RW 3] page size in L2P table for QM module; -4k; -8k; -16k; -32k; -64k;
@@ -1921,6 +2045,9 @@
/* [RW 3] Max burst size filed for read requests port 0; 000 - 128B;
001:256B; 010: 512B; 11:1K:100:2K; 01:4K */
#define PXP2_REG_RQ_RD_MBS0 0x120160
+/* [RW 3] Max burst size filed for read requests port 1; 000 - 128B;
+ 001:256B; 010: 512B; 11:1K:100:2K; 01:4K */
+#define PXP2_REG_RQ_RD_MBS1 0x120168
/* [RW 2] Endian mode for src */
#define PXP2_REG_RQ_SRC_ENDIAN_M 0x12019c
/* [RW 3] page size in L2P table for SRC module; -4k; -8k; -16k; -32k; -64k;
@@ -2000,10 +2127,17 @@
/* [RW 3] Max burst size filed for write requests port 0; 000 - 128B;
001:256B; 010: 512B; */
#define PXP2_REG_RQ_WR_MBS0 0x12015c
+/* [RW 3] Max burst size filed for write requests port 1; 000 - 128B;
+ 001:256B; 010: 512B; */
+#define PXP2_REG_RQ_WR_MBS1 0x120164
/* [RW 10] if Number of entries in dmae fifo will be higer than this
threshold then has_payload indication will be asserted; the default value
should be equal to &gt; write MBS size! */
#define PXP2_REG_WR_DMAE_TH 0x120368
+/* [RW 10] if Number of entries in usdmdp fifo will be higer than this
+ threshold then has_payload indication will be asserted; the default value
+ should be equal to &gt; write MBS size! */
+#define PXP2_REG_WR_USDMDP_TH 0x120348
/* [R 1] debug only: Indication if PSWHST arbiter is idle */
#define PXP_REG_HST_ARB_IS_IDLE 0x103004
/* [R 8] debug only: A bit mask for all PSWHST arbiter clients. '1' means
@@ -2021,6 +2155,8 @@
#define PXP_REG_PXP_INT_STS_CLR_0 0x10306c
/* [RW 26] Parity mask register #0 read/write */
#define PXP_REG_PXP_PRTY_MASK 0x103094
+/* [R 26] Parity register #0 read */
+#define PXP_REG_PXP_PRTY_STS 0x103088
/* [RW 4] The activity counter initial increment value sent in the load
request */
#define QM_REG_ACTCTRINITVAL_0 0x168040
@@ -2127,6 +2263,8 @@
#define QM_REG_QM_INT_STS 0x168438
/* [RW 9] Parity mask register #0 read/write */
#define QM_REG_QM_PRTY_MASK 0x168454
+/* [R 9] Parity register #0 read */
+#define QM_REG_QM_PRTY_STS 0x168448
/* [R 32] Current queues in pipeline: Queues from 32 to 63 */
#define QM_REG_QSTATUS_HIGH 0x16802c
/* [R 32] Current queues in pipeline: Queues from 0 to 31 */
@@ -2410,6 +2548,8 @@
#define SRC_REG_SRC_INT_STS 0x404ac
/* [RW 3] Parity mask register #0 read/write */
#define SRC_REG_SRC_PRTY_MASK 0x404c8
+/* [R 3] Parity register #0 read */
+#define SRC_REG_SRC_PRTY_STS 0x404bc
/* [R 4] Used to read the value of the XX protection CAM occupancy counter. */
#define TCM_REG_CAM_OCCUP 0x5017c
/* [RW 1] CDU AG read Interface enable. If 0 - the request input is
@@ -2730,6 +2870,8 @@
#define TSDM_REG_TSDM_INT_MASK_1 0x422ac
/* [RW 11] Parity mask register #0 read/write */
#define TSDM_REG_TSDM_PRTY_MASK 0x422bc
+/* [R 11] Parity register #0 read */
+#define TSDM_REG_TSDM_PRTY_STS 0x422b0
/* [RW 5] The number of time_slots in the arbitration cycle */
#define TSEM_REG_ARB_CYCLE_SIZE 0x180034
/* [RW 3] The source that is associated with arbitration element 0. Source
@@ -2854,6 +2996,9 @@
/* [RW 32] Parity mask register #0 read/write */
#define TSEM_REG_TSEM_PRTY_MASK_0 0x180120
#define TSEM_REG_TSEM_PRTY_MASK_1 0x180130
+/* [R 32] Parity register #0 read */
+#define TSEM_REG_TSEM_PRTY_STS_0 0x180114
+#define TSEM_REG_TSEM_PRTY_STS_1 0x180124
/* [R 5] Used to read the XX protection CAM occupancy counter. */
#define UCM_REG_CAM_OCCUP 0xe0170
/* [RW 1] CDU AG read Interface enable. If 0 - the request input is
@@ -3155,6 +3300,8 @@
#define USDM_REG_USDM_INT_MASK_1 0xc42b0
/* [RW 11] Parity mask register #0 read/write */
#define USDM_REG_USDM_PRTY_MASK 0xc42c0
+/* [R 11] Parity register #0 read */
+#define USDM_REG_USDM_PRTY_STS 0xc42b4
/* [RW 5] The number of time_slots in the arbitration cycle */
#define USEM_REG_ARB_CYCLE_SIZE 0x300034
/* [RW 3] The source that is associated with arbitration element 0. Source
@@ -3279,6 +3426,9 @@
/* [RW 32] Parity mask register #0 read/write */
#define USEM_REG_USEM_PRTY_MASK_0 0x300130
#define USEM_REG_USEM_PRTY_MASK_1 0x300140
+/* [R 32] Parity register #0 read */
+#define USEM_REG_USEM_PRTY_STS_0 0x300124
+#define USEM_REG_USEM_PRTY_STS_1 0x300134
/* [RW 2] The queue index for registration on Aux1 counter flag. */
#define XCM_REG_AUX1_Q 0x20134
/* [RW 2] Per each decision rule the queue index to register to. */
@@ -3684,6 +3834,8 @@
#define XSDM_REG_XSDM_INT_MASK_1 0x1662ac
/* [RW 11] Parity mask register #0 read/write */
#define XSDM_REG_XSDM_PRTY_MASK 0x1662bc
+/* [R 11] Parity register #0 read */
+#define XSDM_REG_XSDM_PRTY_STS 0x1662b0
/* [RW 5] The number of time_slots in the arbitration cycle */
#define XSEM_REG_ARB_CYCLE_SIZE 0x280034
/* [RW 3] The source that is associated with arbitration element 0. Source
@@ -3808,6 +3960,9 @@
/* [RW 32] Parity mask register #0 read/write */
#define XSEM_REG_XSEM_PRTY_MASK_0 0x280130
#define XSEM_REG_XSEM_PRTY_MASK_1 0x280140
+/* [R 32] Parity register #0 read */
+#define XSEM_REG_XSEM_PRTY_STS_0 0x280124
+#define XSEM_REG_XSEM_PRTY_STS_1 0x280134
#define MCPR_NVM_ACCESS_ENABLE_EN (1L<<0)
#define MCPR_NVM_ACCESS_ENABLE_WR_EN (1L<<1)
#define MCPR_NVM_ADDR_NVM_ADDR_VALUE (0xffffffL<<0)
@@ -3847,6 +4002,8 @@
#define EMAC_MDIO_COMM_START_BUSY (1L<<29)
#define EMAC_MDIO_MODE_AUTO_POLL (1L<<4)
#define EMAC_MDIO_MODE_CLAUSE_45 (1L<<31)
+#define EMAC_MDIO_MODE_CLOCK_CNT (0x3fL<<16)
+#define EMAC_MDIO_MODE_CLOCK_CNT_BITSHIFT 16
#define EMAC_MODE_25G_MODE (1L<<5)
#define EMAC_MODE_ACPI_RCVD (1L<<20)
#define EMAC_MODE_HALF_DUPLEX (1L<<1)
@@ -3874,6 +4031,17 @@
#define EMAC_RX_MTU_SIZE_JUMBO_ENA (1L<<31)
#define EMAC_TX_MODE_EXT_PAUSE_EN (1L<<3)
#define EMAC_TX_MODE_RESET (1L<<0)
+#define MISC_REGISTERS_GPIO_1 1
+#define MISC_REGISTERS_GPIO_2 2
+#define MISC_REGISTERS_GPIO_3 3
+#define MISC_REGISTERS_GPIO_CLR_POS 16
+#define MISC_REGISTERS_GPIO_FLOAT (0xffL<<24)
+#define MISC_REGISTERS_GPIO_FLOAT_POS 24
+#define MISC_REGISTERS_GPIO_INPUT_HI_Z 2
+#define MISC_REGISTERS_GPIO_OUTPUT_HIGH 1
+#define MISC_REGISTERS_GPIO_OUTPUT_LOW 0
+#define MISC_REGISTERS_GPIO_PORT_SHIFT 4
+#define MISC_REGISTERS_GPIO_SET_POS 8
#define MISC_REGISTERS_RESET_REG_1_CLEAR 0x588
#define MISC_REGISTERS_RESET_REG_1_SET 0x584
#define MISC_REGISTERS_RESET_REG_2_CLEAR 0x598
@@ -3891,6 +4059,25 @@
#define MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_XGXS0_RSTB_HW (0x1<<4)
#define MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_XGXS0_TXD_FIFO_RSTB (0x1<<8)
#define MISC_REGISTERS_RESET_REG_3_SET 0x5a4
+#define MISC_REGISTERS_SPIO_4 4
+#define MISC_REGISTERS_SPIO_5 5
+#define MISC_REGISTERS_SPIO_7 7
+#define MISC_REGISTERS_SPIO_CLR_POS 16
+#define MISC_REGISTERS_SPIO_FLOAT (0xffL<<24)
+#define GRC_MISC_REGISTERS_SPIO_FLOAT7 0x80000000
+#define GRC_MISC_REGISTERS_SPIO_FLOAT6 0x40000000
+#define GRC_MISC_REGISTERS_SPIO_FLOAT5 0x20000000
+#define GRC_MISC_REGISTERS_SPIO_FLOAT4 0x10000000
+#define MISC_REGISTERS_SPIO_FLOAT_POS 24
+#define MISC_REGISTERS_SPIO_INPUT_HI_Z 2
+#define MISC_REGISTERS_SPIO_INT_OLD_SET_POS 16
+#define MISC_REGISTERS_SPIO_OUTPUT_HIGH 1
+#define MISC_REGISTERS_SPIO_OUTPUT_LOW 0
+#define MISC_REGISTERS_SPIO_SET_POS 8
+#define HW_LOCK_MAX_RESOURCE_VALUE 31
+#define HW_LOCK_RESOURCE_8072_MDIO 0
+#define HW_LOCK_RESOURCE_GPIO 1
+#define HW_LOCK_RESOURCE_SPIO 2
#define AEU_INPUTS_ATTN_BITS_BRB_PARITY_ERROR (1<<18)
#define AEU_INPUTS_ATTN_BITS_CCM_HW_INTERRUPT (1<<31)
#define AEU_INPUTS_ATTN_BITS_CDU_HW_INTERRUPT (1<<9)
@@ -3918,6 +4105,7 @@
#define AEU_INPUTS_ATTN_BITS_QM_HW_INTERRUPT (1<<3)
#define AEU_INPUTS_ATTN_BITS_QM_PARITY_ERROR (1<<2)
#define AEU_INPUTS_ATTN_BITS_SEARCHER_PARITY_ERROR (1<<22)
+#define AEU_INPUTS_ATTN_BITS_SPIO5 (1<<15)
#define AEU_INPUTS_ATTN_BITS_TCM_HW_INTERRUPT (1<<27)
#define AEU_INPUTS_ATTN_BITS_TIMERS_HW_INTERRUPT (1<<5)
#define AEU_INPUTS_ATTN_BITS_TSDM_HW_INTERRUPT (1<<25)
@@ -4206,6 +4394,9 @@
#define MDIO_XGXS_BLOCK2_RX_LN_SWAP_FORCE_ENABLE 0x4000
#define MDIO_XGXS_BLOCK2_TX_LN_SWAP 0x11
#define MDIO_XGXS_BLOCK2_TX_LN_SWAP_ENABLE 0x8000
+#define MDIO_XGXS_BLOCK2_UNICORE_MODE_10G 0x14
+#define MDIO_XGXS_BLOCK2_UNICORE_MODE_10G_CX4_XGXS 0x0001
+#define MDIO_XGXS_BLOCK2_UNICORE_MODE_10G_HIGIG_XGXS 0x0010
#define MDIO_XGXS_BLOCK2_TEST_MODE_LANE 0x15
#define MDIO_REG_BANK_GP_STATUS 0x8120
@@ -4362,11 +4553,13 @@
#define MDIO_COMBO_IEEE0_AUTO_NEG_LINK_PARTNER_ABILITY1_SGMII_MODE 0x0001
+#define EXT_PHY_AUTO_NEG_DEVAD 0x7
#define EXT_PHY_OPT_PMA_PMD_DEVAD 0x1
#define EXT_PHY_OPT_WIS_DEVAD 0x2
#define EXT_PHY_OPT_PCS_DEVAD 0x3
#define EXT_PHY_OPT_PHY_XS_DEVAD 0x4
#define EXT_PHY_OPT_CNTL 0x0
+#define EXT_PHY_OPT_CNTL2 0x7
#define EXT_PHY_OPT_PMD_RX_SD 0xa
#define EXT_PHY_OPT_PMD_MISC_CNTL 0xca0a
#define EXT_PHY_OPT_PHY_IDENTIFIER 0xc800
@@ -4378,11 +4571,24 @@
#define EXT_PHY_OPT_LASI_STATUS 0x9005
#define EXT_PHY_OPT_PCS_STATUS 0x0020
#define EXT_PHY_OPT_XGXS_LANE_STATUS 0x0018
+#define EXT_PHY_OPT_AN_LINK_STATUS 0x8304
+#define EXT_PHY_OPT_AN_CL37_CL73 0x8370
+#define EXT_PHY_OPT_AN_CL37_FD 0xffe4
+#define EXT_PHY_OPT_AN_CL37_AN 0xffe0
+#define EXT_PHY_OPT_AN_ADV 0x11
#define EXT_PHY_KR_PMA_PMD_DEVAD 0x1
#define EXT_PHY_KR_PCS_DEVAD 0x3
#define EXT_PHY_KR_AUTO_NEG_DEVAD 0x7
#define EXT_PHY_KR_CTRL 0x0000
+#define EXT_PHY_KR_STATUS 0x0001
+#define EXT_PHY_KR_AUTO_NEG_COMPLETE 0x0020
+#define EXT_PHY_KR_AUTO_NEG_ADVERT 0x0010
+#define EXT_PHY_KR_AUTO_NEG_ADVERT_PAUSE 0x0400
+#define EXT_PHY_KR_AUTO_NEG_ADVERT_PAUSE_ASYMMETRIC 0x0800
+#define EXT_PHY_KR_AUTO_NEG_ADVERT_PAUSE_BOTH 0x0C00
+#define EXT_PHY_KR_AUTO_NEG_ADVERT_PAUSE_MASK 0x0C00
+#define EXT_PHY_KR_LP_AUTO_NEG 0x0013
#define EXT_PHY_KR_CTRL2 0x0007
#define EXT_PHY_KR_PCS_STATUS 0x0020
#define EXT_PHY_KR_PMD_CTRL 0x0096
@@ -4391,4 +4597,8 @@
#define EXT_PHY_KR_MISC_CTRL1 0xca85
#define EXT_PHY_KR_GEN_CTRL 0xca10
#define EXT_PHY_KR_ROM_CODE 0xca19
+#define EXT_PHY_KR_ROM_RESET_INTERNAL_MP 0x0188
+#define EXT_PHY_KR_ROM_MICRO_RESET 0x018a
+
+#define EXT_PHY_SFX7101_XGXS_TEST1 0xc00a
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-12-29 16:57:52 +0000