[SCSI] st: add MTWEOFI to write filemarks without flushing drive buffer

This patch adds a new MTIOCTOP operation MTWEOFI that writes filemarks with
immediate bit set. This means that the drive does not flush its buffer and the
next file can be started immediately. This speeds up writing in applications
that have to write multiple small files.

Signed-off-by: Kai Makisara <kai.makisara@kolumbus.fi>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

3 files changed, 24 insertions, 7 deletions

diff --git a/Documentation/scsi/st.txt b/Documentation/scsi/st.txt
index 40752602c05..691ca292c24 100644
--- a/Documentation/scsi/st.txt
+++ b/Documentation/scsi/st.txt
@@ -2,7 +2,7 @@ This file contains brief information about the SCSI tape driver.
 The driver is currently maintained by Kai Mäkisara (email
 Kai.Makisara@kolumbus.fi)
 
-Last modified: Sun Feb 24 21:59:07 2008 by kai.makisara
+Last modified: Sun Aug 29 18:25:47 2010 by kai.makisara
 
 
 BASICS
@@ -85,6 +85,17 @@ writing and the last operation has been a write. Two filemarks can be
 optionally written. In both cases end of data is signified by
 returning zero bytes for two consecutive reads.
 
+Writing filemarks without the immediate bit set in the SCSI command block acts
+as a synchronization point, i.e., all remaining data form the drive buffers is
+written to tape before the command returns. This makes sure that write errors
+are caught at that point, but this takes time. In some applications, several
+consecutive files must be written fast. The MTWEOFI operation can be used to
+write the filemarks without flushing the drive buffer. Writing filemark at
+close() is always flushing the drive buffers. However, if the previous
+operation is MTWEOFI, close() does not write a filemark. This can be used if
+the program wants to close/open the tape device between files and wants to
+skip waiting.
+
 If rewind, offline, bsf, or seek is done and previous tape operation was
 write, a filemark is written before moving tape.
 
@@ -301,6 +312,8 @@ MTBSR   Space backward over count records.
 MTFSS   Space forward over count setmarks.
 MTBSS   Space backward over count setmarks.
 MTWEOF  Write count filemarks.
+MTWEOFI	Write count filemarks with immediate bit set (i.e., does not
+	wait until data is on tape)
 MTWSM   Write count setmarks.
 MTREW   Rewind tape.
 MTOFFL  Set device off line (often rewind plus eject).
diff --git a/drivers/scsi/st.c b/drivers/scsi/st.c
index 24211d0efa6..9e2c3a72ff4 100644
--- a/drivers/scsi/st.c
+++ b/drivers/scsi/st.c
@@ -9,7 +9,7 @@
    Steve Hirsch, Andreas Koppenh"ofer, Michael Leodolter, Eyal Lebedinsky,
    Michael Schaefer, J"org Weule, and Eric Youngdale.
 
-   Copyright 1992 - 2008 Kai Makisara
+   Copyright 1992 - 2010 Kai Makisara
    email Kai.Makisara@kolumbus.fi
 
    Some small formal changes - aeb, 950809
@@ -17,7 +17,7 @@
    Last modified: 18-JAN-1998 Richard Gooch <rgooch@atnf.csiro.au> Devfs support
  */
 
-static const char *verstr = "20081215";
+static const char *verstr = "20100829";
 
 #include <linux/module.h>
 
@@ -2696,18 +2696,21 @@ static int st_int_ioctl(struct scsi_tape *STp, unsigned int cmd_in, unsigned lon
 		}
 		break;
 	case MTWEOF:
+	case MTWEOFI:
 	case MTWSM:
 		if (STp->write_prot)
 			return (-EACCES);
 		cmd[0] = WRITE_FILEMARKS;
 		if (cmd_in == MTWSM)
 			cmd[1] = 2;
+		if (cmd_in == MTWEOFI)
+			cmd[1] |= 1;
 		cmd[2] = (arg >> 16);
 		cmd[3] = (arg >> 8);
 		cmd[4] = arg;
 		timeout = STp->device->request_queue->rq_timeout;
                 DEBC(
-                     if (cmd_in == MTWEOF)
+		     if (cmd_in != MTWSM)
                                printk(ST_DEB_MSG "%s: Writing %d filemarks.\n", name,
 				 cmd[2] * 65536 + cmd[3] * 256 + cmd[4]);
                      else
@@ -2883,8 +2886,8 @@ static int st_int_ioctl(struct scsi_tape *STp, unsigned int cmd_in, unsigned lon
 		else if (chg_eof)
 			STps->eof = ST_NOEOF;
 
-		if (cmd_in == MTWEOF)
-			STps->rw = ST_IDLE;
+		if (cmd_in == MTWEOF || cmd_in == MTWEOFI)
+			STps->rw = ST_IDLE;  /* prevent automatic WEOF at close */
 	} else { /* SCSI command was not completely successful. Don't return
                     from this block without releasing the SCSI command block! */
 		struct st_cmdstatus *cmdstatp = &STp->buffer->cmdstat;
@@ -2901,7 +2904,7 @@ static int st_int_ioctl(struct scsi_tape *STp, unsigned int cmd_in, unsigned lon
 		else
 			undone = 0;
 
-		if (cmd_in == MTWEOF &&
+		if ((cmd_in == MTWEOF || cmd_in == MTWEOFI) &&
 		    cmdstatp->have_sense &&
 		    (cmdstatp->flags & SENSE_EOM)) {
 			if (cmdstatp->sense_hdr.sense_key == NO_SENSE ||
diff --git a/include/linux/mtio.h b/include/linux/mtio.h
index ef01d6aa593..8f825756c45 100644
--- a/include/linux/mtio.h
+++ b/include/linux/mtio.h
@@ -63,6 +63,7 @@ struct	mtop {
 #define MTCOMPRESSION 32/* control compression with SCSI mode page 15 */
 #define MTSETPART 33	/* Change the active tape partition */
 #define MTMKPART  34	/* Format the tape with one or two partitions */
+#define MTWEOFI	35	/* write an end-of-file record (mark) in immediate mode */
 
 /* structure for MTIOCGET - mag tape get status command */