diff options
| author | Greg Ungerer <gerg@snapgear.com> | 2006-01-10 16:59:04 +1000 |
|---|---|---|
| committer | Linus Torvalds <torvalds@g5.osdl.org> | 2006-01-10 09:31:27 -0800 |
| commit | 082f2c1cc7aa7aabdbf5235b788ff42e10abb399 (patch) | |
| tree | 6df24ee2dbfff72f29c5ddac02d7f68df241a7f7 | |
| parent | 892b62527fb3cd6753d6d2b79b5f21259f344cf5 (diff) | |
[PATCH] m68knommu: set irq priority/level different for each ColdFire serial port
Set the hardware interrupt priority to a different value for each
attached ColdFire serial port. According to the CPU documentation you
should not use the same combination of level/priority on more than one
device. People have reported odd serial port behavior with them set the
same.
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
| -rw-r--r-- | drivers/serial/mcfserial.c | 2 |
1 files changed, 1 insertions, 1 deletions
diff --git a/drivers/serial/mcfserial.c b/drivers/serial/mcfserial.c index f2a51e61eec..d957a3a9edf 100644 --- a/drivers/serial/mcfserial.c +++ b/drivers/serial/mcfserial.c @@ -1516,7 +1516,7 @@ static void mcfrs_irqinit(struct mcf_serial *info) icrp = (volatile unsigned char *) (MCF_MBAR + MCFICM_INTC0 + MCFINTC_ICR0 + MCFINT_UART0 + info->line); - *icrp = 0x33; /* UART0 with level 6, priority 3 */ + *icrp = 0x30 + info->line; /* level 6, line based priority */ imrp = (volatile unsigned long *) (MCF_MBAR + MCFICM_INTC0 + MCFINTC_IMRL); |