summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorGrant Grundler <grundler@google.com>2011-11-15 07:12:42 +0000
committerDavid S. Miller <davem@davemloft.net>2011-11-15 16:26:06 -0500
commitb2d3ad291fab1783cc12eef3dd91c5fa98c2e5d5 (patch)
tree4fa38c93a0bc076dc63413783a3b471de8976708
parentd3665188a79254c0698aa161e2c36dcda4e9ef55 (diff)
net-next:asix: V2 more fixes for ax88178 phy init sequence
Now works on Samsung Series 5 (chromebook) Two fixes here: o use 0x7F mask for phymode o read phyid *AFTER* phy is powered up (via GPIOs) Signed-off-by: Allan Chou <allan@asix.com.tw> Signed-off-by: Grant Grundler <grundler@chromium.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-rw-r--r--drivers/net/usb/asix.c22
1 files changed, 15 insertions, 7 deletions
diff --git a/drivers/net/usb/asix.c b/drivers/net/usb/asix.c
index 8462be58955..f870ab964e3 100644
--- a/drivers/net/usb/asix.c
+++ b/drivers/net/usb/asix.c
@@ -1248,6 +1248,7 @@ static int ax88178_reset(struct usbnet *dev)
__le16 eeprom;
u8 status;
int gpio0 = 0;
+ u32 phyid;
asix_read_cmd(dev, AX_CMD_READ_GPIOS, 0, 0, 1, &status);
dbg("GPIO Status: 0x%04x", status);
@@ -1263,12 +1264,13 @@ static int ax88178_reset(struct usbnet *dev)
data->ledmode = 0;
gpio0 = 1;
} else {
- data->phymode = le16_to_cpu(eeprom) & 7;
+ data->phymode = le16_to_cpu(eeprom) & 0x7F;
data->ledmode = le16_to_cpu(eeprom) >> 8;
gpio0 = (le16_to_cpu(eeprom) & 0x80) ? 0 : 1;
}
dbg("GPIO0: %d, PhyMode: %d", gpio0, data->phymode);
+ /* Power up external GigaPHY through AX88178 GPIO pin */
asix_write_gpio(dev, AX_GPIO_RSE | AX_GPIO_GPO_1 | AX_GPIO_GPO1EN, 40);
if ((le16_to_cpu(eeprom) >> 8) != 1) {
asix_write_gpio(dev, 0x003c, 30);
@@ -1280,6 +1282,13 @@ static int ax88178_reset(struct usbnet *dev)
asix_write_gpio(dev, AX_GPIO_GPO1EN | AX_GPIO_GPO_1, 30);
}
+ /* Read PHYID register *AFTER* powering up PHY */
+ phyid = asix_get_phyid(dev);
+ dbg("PHYID=0x%08x", phyid);
+
+ /* Set AX88178 to enable MII/GMII/RGMII interface for external PHY */
+ asix_write_cmd(dev, AX_CMD_SW_PHY_SELECT, 0, 0, 0, NULL);
+
asix_sw_reset(dev, 0);
msleep(150);
@@ -1424,7 +1433,6 @@ static int ax88178_bind(struct usbnet *dev, struct usb_interface *intf)
{
int ret;
u8 buf[ETH_ALEN];
- u32 phyid;
struct asix_data *data = (struct asix_data *)&dev->data;
data->eeprom_len = AX88772_EEPROM_LEN;
@@ -1451,12 +1459,12 @@ static int ax88178_bind(struct usbnet *dev, struct usb_interface *intf)
dev->net->netdev_ops = &ax88178_netdev_ops;
dev->net->ethtool_ops = &ax88178_ethtool_ops;
- phyid = asix_get_phyid(dev);
- dbg("PHYID=0x%08x", phyid);
+ /* Blink LEDS so users know driver saw dongle */
+ asix_sw_reset(dev, 0);
+ msleep(150);
- ret = ax88178_reset(dev);
- if (ret < 0)
- return ret;
+ asix_sw_reset(dev, AX_SWRESET_PRL | AX_SWRESET_IPPD);
+ msleep(150);
/* Asix framing packs multiple eth frames into a 2K usb bulk transfer */
if (dev->driver_info->flags & FLAG_FRAMING_AX) {