[SCSI] lpfc 8.3.29: T10 Diff fixes and enhancements

T10 Diff fixes and enhancements:

- Add SLI4 Lancer support for T10 DIF / BlockGuard (121980)
- Fix SLI4 BlockGuard behavior when protection data is generated by HBA (121980)
- Enhance debugfs for injecting T10 DIF errors (123966, 132966)
- Fix Incorrect usage of bghm for BlockGuard errors (127022)

Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com>
Signed-off-by: James Smart <james.smart@emulex.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>

7 files changed, 1049 insertions, 125 deletions

diff --git a/drivers/scsi/lpfc/lpfc.h b/drivers/scsi/lpfc/lpfc.h
index 825f9307417..5fc044ff656 100644
--- a/drivers/scsi/lpfc/lpfc.h
+++ b/drivers/scsi/lpfc/lpfc.h
@@ -534,6 +534,7 @@ struct lpfc_hba {
 	void (*lpfc_scsi_prep_cmnd)
 		(struct lpfc_vport *, struct lpfc_scsi_buf *,
 		 struct lpfc_nodelist *);
+
 	/* IOCB interface function jump table entries */
 	int (*__lpfc_sli_issue_iocb)
 		(struct lpfc_hba *, uint32_t,
@@ -541,8 +542,6 @@ struct lpfc_hba {
 	void (*__lpfc_sli_release_iocbq)(struct lpfc_hba *,
 			 struct lpfc_iocbq *);
 	int (*lpfc_hba_down_post)(struct lpfc_hba *phba);
-
-
 	IOCB_t * (*lpfc_get_iocb_from_iocbq)
 		(struct lpfc_iocbq *);
 	void (*lpfc_scsi_cmd_iocb_cmpl)
@@ -551,10 +550,12 @@ struct lpfc_hba {
 	/* MBOX interface function jump table entries */
 	int (*lpfc_sli_issue_mbox)
 		(struct lpfc_hba *, LPFC_MBOXQ_t *, uint32_t);
+
 	/* Slow-path IOCB process function jump table entries */
 	void (*lpfc_sli_handle_slow_ring_event)
 		(struct lpfc_hba *phba, struct lpfc_sli_ring *pring,
 		 uint32_t mask);
+
 	/* INIT device interface function jump table entries */
 	int (*lpfc_sli_hbq_to_firmware)
 		(struct lpfc_hba *, uint32_t, struct hbq_dmabuf *);
@@ -573,6 +574,10 @@ struct lpfc_hba {
 	int (*lpfc_selective_reset)
 		(struct lpfc_hba *);
 
+	int (*lpfc_bg_scsi_prep_dma_buf)
+		(struct lpfc_hba *, struct lpfc_scsi_buf *);
+	/* Add new entries here */
+
 	/* SLI4 specific HBA data structure */
 	struct lpfc_sli4_hba sli4_hba;
 
@@ -838,6 +843,7 @@ struct lpfc_hba {
 	struct dentry *debug_writeGuard; /* inject write guard_tag errors */
 	struct dentry *debug_writeApp;   /* inject write app_tag errors */
 	struct dentry *debug_writeRef;   /* inject write ref_tag errors */
+	struct dentry *debug_readGuard;  /* inject read guard_tag errors */
 	struct dentry *debug_readApp;    /* inject read app_tag errors */
 	struct dentry *debug_readRef;    /* inject read ref_tag errors */
 
@@ -845,10 +851,11 @@ struct lpfc_hba {
 	uint32_t lpfc_injerr_wgrd_cnt;
 	uint32_t lpfc_injerr_wapp_cnt;
 	uint32_t lpfc_injerr_wref_cnt;
+	uint32_t lpfc_injerr_rgrd_cnt;
 	uint32_t lpfc_injerr_rapp_cnt;
 	uint32_t lpfc_injerr_rref_cnt;
 	sector_t lpfc_injerr_lba;
-#define LPFC_INJERR_LBA_OFF	(sector_t)0xffffffffffffffff
+#define LPFC_INJERR_LBA_OFF	(sector_t)(-1)
 
 	struct dentry *debug_slow_ring_trc;
 	struct lpfc_debugfs_trc *slow_ring_trc;
diff --git a/drivers/scsi/lpfc/lpfc_debugfs.c b/drivers/scsi/lpfc/lpfc_debugfs.c
index 3587a3fe8fc..22e17be04d8 100644
--- a/drivers/scsi/lpfc/lpfc_debugfs.c
+++ b/drivers/scsi/lpfc/lpfc_debugfs.c
@@ -1019,6 +1019,8 @@ lpfc_debugfs_dif_err_read(struct file *file, char __user *buf,
 		cnt = snprintf(cbuf, 16, "%u\n", phba->lpfc_injerr_wapp_cnt);
 	else if (dent == phba->debug_writeRef)
 		cnt = snprintf(cbuf, 16, "%u\n", phba->lpfc_injerr_wref_cnt);
+	else if (dent == phba->debug_readGuard)
+		cnt = snprintf(cbuf, 16, "%u\n", phba->lpfc_injerr_rgrd_cnt);
 	else if (dent == phba->debug_readApp)
 		cnt = snprintf(cbuf, 16, "%u\n", phba->lpfc_injerr_rapp_cnt);
 	else if (dent == phba->debug_readRef)
@@ -1057,6 +1059,8 @@ lpfc_debugfs_dif_err_write(struct file *file, const char __user *buf,
 		phba->lpfc_injerr_wapp_cnt = (uint32_t)tmp;
 	else if (dent == phba->debug_writeRef)
 		phba->lpfc_injerr_wref_cnt = (uint32_t)tmp;
+	else if (dent == phba->debug_readGuard)
+		phba->lpfc_injerr_rgrd_cnt = (uint32_t)tmp;
 	else if (dent == phba->debug_readApp)
 		phba->lpfc_injerr_rapp_cnt = (uint32_t)tmp;
 	else if (dent == phba->debug_readRef)
@@ -3978,6 +3982,17 @@ lpfc_debugfs_initialize(struct lpfc_vport *vport)
 			goto debug_failed;
 		}
 
+		snprintf(name, sizeof(name), "readGuardInjErr");
+		phba->debug_readGuard =
+			debugfs_create_file(name, S_IFREG|S_IRUGO|S_IWUSR,
+			phba->hba_debugfs_root,
+			phba, &lpfc_debugfs_op_dif_err);
+		if (!phba->debug_readGuard) {
+			lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT,
+				"0808 Cannot create debugfs readGuard\n");
+			goto debug_failed;
+		}
+
 		snprintf(name, sizeof(name), "readAppInjErr");
 		phba->debug_readApp =
 			debugfs_create_file(name, S_IFREG|S_IRUGO|S_IWUSR,
@@ -4318,6 +4333,10 @@ lpfc_debugfs_terminate(struct lpfc_vport *vport)
 			debugfs_remove(phba->debug_writeRef); /* writeRef */
 			phba->debug_writeRef = NULL;
 		}
+		if (phba->debug_readGuard) {
+			debugfs_remove(phba->debug_readGuard); /* readGuard */
+			phba->debug_readGuard = NULL;
+		}
 		if (phba->debug_readApp) {
 			debugfs_remove(phba->debug_readApp); /* readApp */
 			phba->debug_readApp = NULL;
diff --git a/drivers/scsi/lpfc/lpfc_hw4.h b/drivers/scsi/lpfc/lpfc_hw4.h
index cc19bc1b5ac..9e2b9b227e1 100644
--- a/drivers/scsi/lpfc/lpfc_hw4.h
+++ b/drivers/scsi/lpfc/lpfc_hw4.h
@@ -321,6 +321,10 @@ struct lpfc_cqe {
 #define CQE_STATUS_CMD_REJECT		0xb
 #define CQE_STATUS_FCP_TGT_LENCHECK	0xc
 #define CQE_STATUS_NEED_BUFF_ENTRY	0xf
+#define CQE_STATUS_DI_ERROR		0x16
+
+/* Used when mapping CQE status to IOCB */
+#define LPFC_IOCB_STATUS_MASK		0xf
 
 /* Status returned by hardware (valid only if status = CQE_STATUS_SUCCESS). */
 #define CQE_HW_STATUS_NO_ERR		0x0
@@ -348,6 +352,21 @@ struct lpfc_wcqe_complete {
 #define lpfc_wcqe_c_hw_status_WORD	word0
 	uint32_t total_data_placed;
 	uint32_t parameter;
+#define lpfc_wcqe_c_bg_edir_SHIFT	5
+#define lpfc_wcqe_c_bg_edir_MASK	0x00000001
+#define lpfc_wcqe_c_bg_edir_WORD	parameter
+#define lpfc_wcqe_c_bg_tdpv_SHIFT	3
+#define lpfc_wcqe_c_bg_tdpv_MASK	0x00000001
+#define lpfc_wcqe_c_bg_tdpv_WORD	parameter
+#define lpfc_wcqe_c_bg_re_SHIFT		2
+#define lpfc_wcqe_c_bg_re_MASK		0x00000001
+#define lpfc_wcqe_c_bg_re_WORD		parameter
+#define lpfc_wcqe_c_bg_ae_SHIFT		1
+#define lpfc_wcqe_c_bg_ae_MASK		0x00000001
+#define lpfc_wcqe_c_bg_ae_WORD		parameter
+#define lpfc_wcqe_c_bg_ge_SHIFT		0
+#define lpfc_wcqe_c_bg_ge_MASK		0x00000001
+#define lpfc_wcqe_c_bg_ge_WORD		parameter
 	uint32_t word3;
 #define lpfc_wcqe_c_valid_SHIFT		lpfc_cqe_valid_SHIFT
 #define lpfc_wcqe_c_valid_MASK		lpfc_cqe_valid_MASK
@@ -359,8 +378,8 @@ struct lpfc_wcqe_complete {
 #define lpfc_wcqe_c_pv_MASK		0x00000001
 #define lpfc_wcqe_c_pv_WORD		word3
 #define lpfc_wcqe_c_priority_SHIFT	24
-#define lpfc_wcqe_c_priority_MASK		0x00000007
-#define lpfc_wcqe_c_priority_WORD		word3
+#define lpfc_wcqe_c_priority_MASK	0x00000007
+#define lpfc_wcqe_c_priority_WORD	word3
 #define lpfc_wcqe_c_code_SHIFT		lpfc_cqe_code_SHIFT
 #define lpfc_wcqe_c_code_MASK		lpfc_cqe_code_MASK
 #define lpfc_wcqe_c_code_WORD		lpfc_cqe_code_WORD
diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
index f3ad7349f5d..d9628770f11 100644
--- a/drivers/scsi/lpfc/lpfc_init.c
+++ b/drivers/scsi/lpfc/lpfc_init.c
@@ -4380,6 +4380,7 @@ lpfc_sli4_driver_resource_setup(struct lpfc_hba *phba)
 	uint8_t pn_page[LPFC_MAX_SUPPORTED_PAGES] = {0};
 	struct lpfc_mqe *mqe;
 	int longs, sli_family;
+	int sges_per_segment;
 
 	/* Before proceed, wait for POST done and device ready */
 	rc = lpfc_sli4_post_status_check(phba);
@@ -4443,6 +4444,11 @@ lpfc_sli4_driver_resource_setup(struct lpfc_hba *phba)
 	phba->fc_map[1] = LPFC_FCOE_FCF_MAP1;
 	phba->fc_map[2] = LPFC_FCOE_FCF_MAP2;
 
+	/* With BlockGuard we can have multiple SGEs per Data Segemnt */
+	sges_per_segment = 1;
+	if (phba->cfg_enable_bg)
+		sges_per_segment = 2;
+
 	/*
 	 * Since the sg_tablesize is module parameter, the sg_dma_buf_size
 	 * used to create the sg_dma_buf_pool must be dynamically calculated.
@@ -4451,7 +4457,8 @@ lpfc_sli4_driver_resource_setup(struct lpfc_hba *phba)
 	 * sgl sizes of must be a power of 2.
 	 */
 	buf_size = (sizeof(struct fcp_cmnd) + sizeof(struct fcp_rsp) +
-		    ((phba->cfg_sg_seg_cnt + 2) * sizeof(struct sli4_sge)));
+		    (((phba->cfg_sg_seg_cnt * sges_per_segment) + 2) *
+		    sizeof(struct sli4_sge)));
 
 	sli_family = bf_get(lpfc_sli_intf_sli_family, &phba->sli4_hba.sli_intf);
 	max_buf_size = LPFC_SLI4_MAX_BUF_SIZE;
@@ -4468,6 +4475,7 @@ lpfc_sli4_driver_resource_setup(struct lpfc_hba *phba)
 	default:
 		break;
 	}
+
 	for (dma_buf_size = LPFC_SLI4_MIN_BUF_SIZE;
 	     dma_buf_size < max_buf_size && buf_size > dma_buf_size;
 	     dma_buf_size = dma_buf_size << 1)
diff --git a/drivers/scsi/lpfc/lpfc_scsi.c b/drivers/scsi/lpfc/lpfc_scsi.c
index c60f5d0b386..efc055b6bac 100644
--- a/drivers/scsi/lpfc/lpfc_scsi.c
+++ b/drivers/scsi/lpfc/lpfc_scsi.c
@@ -1,7 +1,7 @@
 /*******************************************************************
  * This file is part of the Emulex Linux Device Driver for         *
  * Fibre Channel Host Bus Adapters.                                *
- * Copyright (C) 2004-2011 Emulex.  All rights reserved.           *
+ * Copyright (C) 2004-2012 Emulex.  All rights reserved.           *
  * EMULEX and SLI are trademarks of Emulex.                        *
  * www.emulex.com                                                  *
  * Portions Copyright (C) 2004-2005 Christoph Hellwig              *
@@ -1280,31 +1280,45 @@ lpfc_cmd_blksize(struct scsi_cmnd *sc)
 }
 
 #ifdef CONFIG_SCSI_LPFC_DEBUG_FS
-/*
- * Given a scsi cmnd, determine the BlockGuard tags to be used with it
+
+#define BG_ERR_INIT	1
+#define BG_ERR_TGT	2
+#define BG_ERR_SWAP	3
+#define BG_ERR_CHECK	4
+
+/**
+ * lpfc_bg_err_inject - Determine if we should inject an error
+ * @phba: The Hba for which this call is being executed.
  * @sc: The SCSI command to examine
  * @reftag: (out) BlockGuard reference tag for transmitted data
  * @apptag: (out) BlockGuard application tag for transmitted data
  * @new_guard (in) Value to replace CRC with if needed
  *
- * Returns (1) if error injection was performed, (0) otherwise
- */
+ * Returns (1) if error injection is detected by Initiator
+ * Returns (2) if error injection is detected by Target
+ * Returns (3) if swapping CSUM->CRC is required for error injection
+ * Returns (4) disabling Guard/Ref/App checking is required for error injection
+ **/
 static int
 lpfc_bg_err_inject(struct lpfc_hba *phba, struct scsi_cmnd *sc,
 		uint32_t *reftag, uint16_t *apptag, uint32_t new_guard)
 {
 	struct scatterlist *sgpe; /* s/g prot entry */
 	struct scatterlist *sgde; /* s/g data entry */
-	struct scsi_dif_tuple *src;
+	struct scsi_dif_tuple *src = NULL;
 	uint32_t op = scsi_get_prot_op(sc);
 	uint32_t blksize;
 	uint32_t numblks;
 	sector_t lba;
 	int rc = 0;
+	int blockoff = 0;
 
 	if (op == SCSI_PROT_NORMAL)
 		return 0;
 
+	sgpe = scsi_prot_sglist(sc);
+	sgde = scsi_sglist(sc);
+
 	lba = scsi_get_lba(sc);
 	if (phba->lpfc_injerr_lba != LPFC_INJERR_LBA_OFF) {
 		blksize = lpfc_cmd_blksize(sc);
@@ -1314,142 +1328,296 @@ lpfc_bg_err_inject(struct lpfc_hba *phba, struct scsi_cmnd *sc,
 		if ((phba->lpfc_injerr_lba < lba) ||
 			(phba->lpfc_injerr_lba >= (lba + numblks)))
 			return 0;
+		if (sgpe) {
+			blockoff = phba->lpfc_injerr_lba - lba;
+			numblks = sg_dma_len(sgpe) /
+				sizeof(struct scsi_dif_tuple);
+			if (numblks < blockoff)
+				blockoff = numblks;
+			src = (struct scsi_dif_tuple *)sg_virt(sgpe);
+			src += blockoff;
+		}
 	}
 
-	sgpe = scsi_prot_sglist(sc);
-	sgde = scsi_sglist(sc);
-
 	/* Should we change the Reference Tag */
 	if (reftag) {
-		/*
-		 * If we are SCSI_PROT_WRITE_STRIP, the protection data is
-		 * being stripped from the wire, thus it doesn't matter.
-		 */
-		if ((op == SCSI_PROT_WRITE_PASS) ||
-			(op == SCSI_PROT_WRITE_INSERT)) {
-			if (phba->lpfc_injerr_wref_cnt) {
+		if (phba->lpfc_injerr_wref_cnt) {
+			switch (op) {
+			case SCSI_PROT_WRITE_PASS:
+				if (blockoff && src) {
+					/* Insert error in middle of the IO */
+
+					lpfc_printf_log(phba, KERN_ERR, LOG_BG,
+					"9076 BLKGRD: Injecting reftag error: "
+					"write lba x%lx + x%x oldrefTag x%x\n",
+					(unsigned long)lba, blockoff,
+					src->ref_tag);
+
+					/*
+					 * NOTE, this will change ref tag in
+					 * the memory location forever!
+					 */
+					src->ref_tag = 0xDEADBEEF;
+					phba->lpfc_injerr_wref_cnt--;
+					phba->lpfc_injerr_lba =
+						LPFC_INJERR_LBA_OFF;
+					rc = BG_ERR_CHECK;
+					break;
+				}
+				/* Drop thru */
+			case SCSI_PROT_WRITE_STRIP:
+				/*
+				 * For WRITE_STRIP and WRITE_PASS,
+				 * force the error on data
+				 * being copied from SLI-Host to SLI-Port.
+				 */
+				*reftag = 0xDEADBEEF;
+				phba->lpfc_injerr_wref_cnt--;
+				phba->lpfc_injerr_lba = LPFC_INJERR_LBA_OFF;
+				rc = BG_ERR_INIT;
 
+				lpfc_printf_log(phba, KERN_ERR, LOG_BG,
+					"9077 BLKGRD: Injecting reftag error: "
+					"write lba x%lx\n", (unsigned long)lba);
+				break;
+			case SCSI_PROT_WRITE_INSERT:
+				/*
+				 * For WRITE_INSERT, force the
+				 * error to be sent on the wire. It should be
+				 * detected by the Target.
+				 */
 				/* DEADBEEF will be the reftag on the wire */
 				*reftag = 0xDEADBEEF;
 				phba->lpfc_injerr_wref_cnt--;
 				phba->lpfc_injerr_lba = LPFC_INJERR_LBA_OFF;
-				rc = 1;
+				rc = BG_ERR_TGT;
 
 				lpfc_printf_log(phba, KERN_ERR, LOG_BG,
-					"9081 BLKGRD: Injecting reftag error: "
+					"9078 BLKGRD: Injecting reftag error: "
 					"write lba x%lx\n", (unsigned long)lba);
+				break;
 			}
-		} else {
-			if (phba->lpfc_injerr_rref_cnt) {
+		}
+		if (phba->lpfc_injerr_rref_cnt) {
+			switch (op) {
+			case SCSI_PROT_READ_INSERT:
+				/*
+				 * For READ_INSERT, it doesn't make sense
+				 * to change the reftag.
+				 */
+				break;
+			case SCSI_PROT_READ_STRIP:
+			case SCSI_PROT_READ_PASS:
+				/*
+				 * For READ_STRIP and READ_PASS, force the
+				 * error on data being read off the wire. It
+				 * should force an IO error to the driver.
+				 */
 				*reftag = 0xDEADBEEF;
 				phba->lpfc_injerr_rref_cnt--;
 				phba->lpfc_injerr_lba = LPFC_INJERR_LBA_OFF;
-				rc = 1;
+				rc = BG_ERR_INIT;
 
 				lpfc_printf_log(phba, KERN_ERR, LOG_BG,
-					"9076 BLKGRD: Injecting reftag error: "
+					"9079 BLKGRD: Injecting reftag error: "
 					"read lba x%lx\n", (unsigned long)lba);
+				break;
 			}
 		}
 	}
 
 	/* Should we change the Application Tag */
 	if (apptag) {
-		/*
-		 * If we are SCSI_PROT_WRITE_STRIP, the protection data is
-		 * being stripped from the wire, thus it doesn't matter.
-		 */
-		if ((op == SCSI_PROT_WRITE_PASS) ||
-			(op == SCSI_PROT_WRITE_INSERT)) {
-			if (phba->lpfc_injerr_wapp_cnt) {
+		if (phba->lpfc_injerr_wapp_cnt) {
+			switch (op) {
+			case SCSI_PROT_WRITE_PASS:
+				if (blockoff && src) {
+					/* Insert error in middle of the IO */
+
+					lpfc_printf_log(phba, KERN_ERR, LOG_BG,
+					"9080 BLKGRD: Injecting apptag error: "
+					"write lba x%lx + x%x oldappTag x%x\n",
+					(unsigned long)lba, blockoff,
+					src->app_tag);
 
+					/*
+					 * NOTE, this will change app tag in
+					 * the memory location forever!
+					 */
+					src->app_tag = 0xDEAD;
+					phba->lpfc_injerr_wapp_cnt--;
+					phba->lpfc_injerr_lba =
+						LPFC_INJERR_LBA_OFF;
+					rc = BG_ERR_CHECK;
+					break;
+				}
+				/* Drop thru */
+			case SCSI_PROT_WRITE_STRIP:
+				/*
+				 * For WRITE_STRIP and WRITE_PASS,
+				 * force the error on data
+				 * being copied from SLI-Host to SLI-Port.
+				 */
+				*apptag = 0xDEAD;
+				phba->lpfc_injerr_wapp_cnt--;
+				phba->lpfc_injerr_lba = LPFC_INJERR_LBA_OFF;
+				rc = BG_ERR_INIT;
+
+				lpfc_printf_log(phba, KERN_ERR, LOG_BG,
+					"0812 BLKGRD: Injecting apptag error: "
+					"write lba x%lx\n", (unsigned long)lba);
+				break;
+			case SCSI_PROT_WRITE_INSERT:
+				/*
+				 * For WRITE_INSERT, force the
+				 * error to be sent on the wire. It should be
+				 * detected by the Target.
+				 */
 				/* DEAD will be the apptag on the wire */
 				*apptag = 0xDEAD;
 				phba->lpfc_injerr_wapp_cnt--;
 				phba->lpfc_injerr_lba = LPFC_INJERR_LBA_OFF;
-				rc = 1;
+				rc = BG_ERR_TGT;
 
 				lpfc_printf_log(phba, KERN_ERR, LOG_BG,
-					"9077 BLKGRD: Injecting apptag error: "
+					"0813 BLKGRD: Injecting apptag error: "
 					"write lba x%lx\n", (unsigned long)lba);
+				break;
 			}
-		} else {
-			if (phba->lpfc_injerr_rapp_cnt) {
+		}
+		if (phba->lpfc_injerr_rapp_cnt) {
+			switch (op) {
+			case SCSI_PROT_READ_INSERT:
+				/*
+				 * For READ_INSERT, it doesn't make sense
+				 * to change the apptag.
+				 */
+				break;
+			case SCSI_PROT_READ_STRIP:
+			case SCSI_PROT_READ_PASS:
+				/*
+				 * For READ_STRIP and READ_PASS, force the
+				 * error on data being read off the wire. It
+				 * should force an IO error to the driver.
+				 */
 				*apptag = 0xDEAD;
 				phba->lpfc_injerr_rapp_cnt--;
 				phba->lpfc_injerr_lba = LPFC_INJERR_LBA_OFF;
-				rc = 1;
+				rc = BG_ERR_INIT;
 
 				lpfc_printf_log(phba, KERN_ERR, LOG_BG,
-					"9078 BLKGRD: Injecting apptag error: "
+					"0814 BLKGRD: Injecting apptag error: "
 					"read lba x%lx\n", (unsigned long)lba);
+				break;
 			}
 		}
 	}
 
+
 	/* Should we change the Guard Tag */
+	if (new_guard) {
+		if (phba->lpfc_injerr_wgrd_cnt) {
+			switch (op) {
+			case SCSI_PROT_WRITE_PASS:
+				if (blockoff && src) {
+					/* Insert error in middle of the IO */
+
+					lpfc_printf_log(phba, KERN_ERR, LOG_BG,
+					"0815 BLKGRD: Injecting guard error: "
+					"write lba x%lx + x%x oldgrdTag x%x\n",
+					(unsigned long)lba, blockoff,
+					src->guard_tag);
 
-	/*
-	 * If we are SCSI_PROT_WRITE_INSERT, the protection data is
-	 * being on the wire is being fully generated on the HBA.
-	 * The host cannot change it or force an error.
-	 */
-	if (((op == SCSI_PROT_WRITE_STRIP) ||
-		(op == SCSI_PROT_WRITE_PASS)) &&
-		phba->lpfc_injerr_wgrd_cnt) {
-		if (sgpe) {
-			src = (struct scsi_dif_tuple *)sg_virt(sgpe);
-			/*
-			 * Just inject an error in the first
-			 * prot block.
-			 */
-			lpfc_printf_log(phba, KERN_ERR, LOG_BG,
-				"9079 BLKGRD: Injecting guard error: "
-				"write lba x%lx oldGuard x%x refTag x%x\n",
-				(unsigned long)lba, src->guard_tag,
-				src->ref_tag);
+					/*
+					 * NOTE, this will change guard tag in
+					 * the memory location forever!
+					 */
+					src->guard_tag = 0xDEAD;
+					phba->lpfc_injerr_wgrd_cnt--;
+					phba->lpfc_injerr_lba =
+						LPFC_INJERR_LBA_OFF;
+					rc = BG_ERR_CHECK;
+					break;
+				}
+				/* Drop thru */
+			case SCSI_PROT_WRITE_STRIP:
+				/*
+				 * For WRITE_STRIP and WRITE_PASS,
+				 * force the error on data
+				 * being copied from SLI-Host to SLI-Port.
+				 */
+				phba->lpfc_injerr_wgrd_cnt--;
+				phba->lpfc_injerr_lba = LPFC_INJERR_LBA_OFF;
 
-			src->guard_tag = (uint16_t)new_guard;
-			phba->lpfc_injerr_wgrd_cnt--;
-			phba->lpfc_injerr_lba = LPFC_INJERR_LBA_OFF;
-			rc = 1;
+				rc = BG_ERR_SWAP;
+				/* Signals the caller to swap CRC->CSUM */
 
-		} else {
-			blksize = lpfc_cmd_blksize(sc);
-			/*
-			 * Jump past the first data block
-			 * and inject an error in the
-			 * prot data. The prot data is already
-			 * embedded after the regular data.
-			 */
-			src = (struct scsi_dif_tuple *)
-					(sg_virt(sgde) + blksize);
+				lpfc_printf_log(phba, KERN_ERR, LOG_BG,
+					"0816 BLKGRD: Injecting guard error: "
+					"write lba x%lx\n", (unsigned long)lba);
+				break;
+			case SCSI_PROT_WRITE_INSERT:
+				/*
+				 * For WRITE_INSERT, force the
+				 * error to be sent on the wire. It should be
+				 * detected by the Target.
+				 */
+				phba->lpfc_injerr_wgrd_cnt--;
+				phba->lpfc_injerr_lba = LPFC_INJERR_LBA_OFF;
 
-			lpfc_printf_log(phba, KERN_ERR, LOG_BG,
-				"9080 BLKGRD: Injecting guard error: "
-				"write lba x%lx oldGuard x%x refTag x%x\n",
-				(unsigned long)lba, src->guard_tag,
-				src->ref_tag);
-
-			src->guard_tag = (uint16_t)new_guard;
-			phba->lpfc_injerr_wgrd_cnt--;
-			phba->lpfc_injerr_lba = LPFC_INJERR_LBA_OFF;
-			rc = 1;
+				rc = BG_ERR_SWAP;
+				/* Signals the caller to swap CRC->CSUM */
+
+				lpfc_printf_log(phba, KERN_ERR, LOG_BG,
+					"0817 BLKGRD: Injecting guard error: "
+					"write lba x%lx\n", (unsigned long)lba);
+				break;
+			}
+		}
+		if (phba->lpfc_injerr_rgrd_cnt) {
+			switch (op) {
+			case SCSI_PROT_READ_INSERT:
+				/*
+				 * For READ_INSERT, it doesn't make sense
+				 * to change the guard tag.
+				 */
+				break;
+			case SCSI_PROT_READ_STRIP:
+			case SCSI_PROT_READ_PASS:
+				/*
+				 * For READ_STRIP and READ_PASS, force the
+				 * error on data being read off the wire. It
+				 * should force an IO error to the driver.
+				 */
+				*apptag = 0xDEAD;
+				phba->lpfc_injerr_rgrd_cnt--;
+				phba->lpfc_injerr_lba = LPFC_INJERR_LBA_OFF;
+
+				rc = BG_ERR_SWAP;
+				/* Signals the caller to swap CRC->CSUM */
+
+				lpfc_printf_log(phba, KERN_ERR, LOG_BG,
+					"0818 BLKGRD: Injecting guard error: "
+					"read lba x%lx\n", (unsigned long)lba);
+			}
 		}
 	}
+
 	return rc;
 }
 #endif
 
-/*
- * Given a scsi cmnd, determine the BlockGuard opcodes to be used with it
+/**
+ * lpfc_sc_to_bg_opcodes - Determine the BlockGuard opcodes to be used with
+ * the specified SCSI command.
+ * @phba: The Hba for which this call is being executed.
  * @sc: The SCSI command to examine
  * @txopt: (out) BlockGuard operation for transmitted data
  * @rxopt: (out) BlockGuard operation for received data
  *
  * Returns: zero on success; non-zero if tx and/or rx op cannot be determined
  *
- */
+ **/
 static int
 lpfc_sc_to_bg_opcodes(struct lpfc_hba *phba, struct scsi_cmnd *sc,
 		uint8_t *txop, uint8_t *rxop)
@@ -1519,8 +1687,88 @@ lpfc_sc_to_bg_opcodes(struct lpfc_hba *phba, struct scsi_cmnd *sc,
 	return ret;
 }
 
-/*
- * This function sets up buffer list for protection groups of
+#ifdef CONFIG_SCSI_LPFC_DEBUG_FS
+/**
+ * lpfc_bg_err_opcodes - reDetermine the BlockGuard opcodes to be used with
+ * the specified SCSI command in order to force a guard tag error.
+ * @phba: The Hba for which this call is being executed.
+ * @sc: The SCSI command to examine
+ * @txopt: (out) BlockGuard operation for transmitted data
+ * @rxopt: (out) BlockGuard operation for received data
+ *
+ * Returns: zero on success; non-zero if tx and/or rx op cannot be determined
+ *
+ **/
+static int
+lpfc_bg_err_opcodes(struct lpfc_hba *phba, struct scsi_cmnd *sc,
+		uint8_t *txop, uint8_t *rxop)
+{
+	uint8_t guard_type = scsi_host_get_guard(sc->device->host);
+	uint8_t ret = 0;
+
+	if (guard_type == SHOST_DIX_GUARD_IP) {
+		switch (scsi_get_prot_op(sc)) {
+		case SCSI_PROT_READ_INSERT:
+		case SCSI_PROT_WRITE_STRIP:
+			*txop = BG_OP_IN_CRC_OUT_NODIF;
+			*rxop = BG_OP_IN_NODIF_OUT_CRC;
+			break;
+
+		case SCSI_PROT_READ_STRIP:
+		case SCSI_PROT_WRITE_INSERT:
+			*txop = BG_OP_IN_NODIF_OUT_CSUM;
+			*rxop = BG_OP_IN_CSUM_OUT_NODIF;
+			break;
+
+		case SCSI_PROT_READ_PASS:
+		case SCSI_PROT_WRITE_PASS:
+			*txop = BG_OP_IN_CRC_OUT_CRC;
+			*rxop = BG_OP_IN_CRC_OUT_CRC;
+			break;
+
+		case SCSI_PROT_NORMAL:
+		default:
+			break;
+
+		}
+	} else {
+		switch (scsi_get_prot_op(sc)) {
+		case SCSI_PROT_READ_STRIP:
+		case SCSI_PROT_WRITE_INSERT:
+			*txop = BG_OP_IN_NODIF_OUT_CSUM;
+			*rxop = BG_OP_IN_CSUM_OUT_NODIF;
+			break;
+
+		case SCSI_PROT_READ_PASS:
+		case SCSI_PROT_WRITE_PASS:
+			*txop = BG_OP_IN_CSUM_OUT_CRC;
+			*rxop = BG_OP_IN_CRC_OUT_CSUM;
+			break;
+
+		case SCSI_PROT_READ_INSERT:
+		case SCSI_PROT_WRITE_STRIP:
+			*txop = BG_OP_IN_CSUM_OUT_NODIF;
+			*rxop = BG_OP_IN_NODIF_OUT_CSUM;
+			break;
+
+		case SCSI_PROT_NORMAL:
+		default:
+			break;
+		}
+	}
+
+	return ret;
+}
+#endif
+
+/**
+ * lpfc_bg_setup_bpl - Setup BlockGuard BPL with no protection data
+ * @phba: The Hba for which this call is being executed.
+ * @sc: pointer to scsi command we're working on
+ * @bpl: pointer to buffer list for protection groups
+ * @datacnt: number of segments of data that have been dma mapped
+ *
+ * This function sets up BPL buffer list for protection groups of
  * type LPFC_PG_TYPE_NO_DIF
  *
  * This is usually used when the HBA is instructed to generate
@@ -1539,12 +1787,11 @@ lpfc_sc_to_bg_opcodes(struct lpfc_hba *phba, struct scsi_cmnd *sc,
  *                                |more Data BDE's ... (opt)|
  *                                +-------------------------+
  *
- * @sc: pointer to scsi command we're working on
- * @bpl: pointer to buffer list for protection groups
- * @datacnt: number of segments of data that have been dma mapped
  *
  * Note: Data s/g buffers have been dma mapped
- */
+ *
+ * Returns the number of BDEs added to the BPL.
+ **/
 static int
 lpfc_bg_setup_bpl(struct lpfc_hba *phba, struct scsi_cmnd *sc,
 		struct ulp_bde64 *bpl, int datasegcnt)
@@ -1555,6 +1802,8 @@ lpfc_bg_setup_bpl(struct lpfc_hba *phba, struct scsi_cmnd *sc,
 	dma_addr_t physaddr;
 	int i = 0, num_bde = 0, status;
 	int datadir = sc->sc_data_direction;
+	uint32_t rc;
+	uint32_t checking = 1;
 	uint32_t reftag;
 	unsigned blksize;
 	uint8_t txop, rxop;
@@ -1565,11 +1814,16 @@ lpfc_bg_setup_bpl(struct lpfc_hba *phba, struct scsi_cmnd *sc,
 
 	/* extract some info from the scsi command for pde*/
 	blksize = lpfc_cmd_blksize(sc);
-	reftag = scsi_get_lba(sc) & 0xffffffff;
+	reftag = (uint32_t)scsi_get_lba(sc); /* Truncate LBA */
 
 #ifdef CONFIG_SCSI_LPFC_DEBUG_FS
-	/* reftag is the only error we can inject here */
-	lpfc_bg_err_inject(phba, sc, &reftag, 0, 0);
+	rc = lpfc_bg_err_inject(phba, sc, &reftag, 0, 1);
+	if (rc) {
+		if (rc == BG_ERR_SWAP)
+			lpfc_bg_err_opcodes(phba, sc, &txop, &rxop);
+		if (rc == BG_ERR_CHECK)
+			checking = 0;
+	}
 #endif
 
 	/* setup PDE5 with what we have */
@@ -1592,8 +1846,8 @@ lpfc_bg_setup_bpl(struct lpfc_hba *phba, struct scsi_cmnd *sc,
 	bf_set(pde6_optx, pde6, txop);
 	bf_set(pde6_oprx, pde6, rxop);
 	if (datadir == DMA_FROM_DEVICE) {
-		bf_set(pde6_ce, pde6, 1);
-		bf_set(pde6_re, pde6, 1);
+		bf_set(pde6_ce, pde6, checking);
+		bf_set(pde6_re, pde6, checking);
 	}
 	bf_set(pde6_ai, pde6, 1);
 	bf_set(pde6_ae, pde6, 0);
@@ -1627,9 +1881,16 @@ out:
 	return num_bde;
 }
 
-/*
- * This function sets up buffer list for protection groups of
- * type LPFC_PG_TYPE_DIF_BUF
+/**
+ * lpfc_bg_setup_bpl_prot - Setup BlockGuard BPL with protection data
+ * @phba: The Hba for which this call is being executed.
+ * @sc: pointer to scsi command we're working on
+ * @bpl: pointer to buffer list for protection groups
+ * @datacnt: number of segments of data that have been dma mapped
+ * @protcnt: number of segment of protection data that have been dma mapped
+ *
+ * This function sets up BPL buffer list for protection groups of
+ * type LPFC_PG_TYPE_DIF
  *
  * This is usually used when DIFs are in their own buffers,
  * separate from the data. The HBA can then by instructed
@@ -1654,14 +1915,11 @@ out:
  *                                    |          ...            |
  *                                    +-------------------------+
  *
- * @sc: pointer to scsi command we're working on
- * @bpl: pointer to buffer list for protection groups
- * @datacnt: number of segments of data that have been dma mapped
- * @protcnt: number of segment of protection data that have been dma mapped
- *
  * Note: It is assumed that both data and protection s/g buffers have been
  *       mapped for DMA
- */
+ *
+ * Returns the number of BDEs added to the BPL.
+ **/
 static int
 lpfc_bg_setup_bpl_prot(struct lpfc_hba *phba, struct scsi_cmnd *sc,
 		struct ulp_bde64 *bpl, int datacnt, int protcnt)
@@ -1681,6 +1939,8 @@ lpfc_bg_setup_bpl_prot(struct lpfc_hba *phba, struct scsi_cmnd *sc,
 	int datadir = sc->sc_data_direction;
 	unsigned char pgdone = 0, alldone = 0;
 	unsigned blksize;
+	uint32_t rc;
+	uint32_t checking = 1;
 	uint32_t reftag;
 	uint8_t txop, rxop;
 	int num_bde = 0;
@@ -1701,11 +1961,16 @@ lpfc_bg_setup_bpl_prot(struct lpfc_hba *phba, struct scsi_cmnd *sc,
 
 	/* extract some info from the scsi command */
 	blksize = lpfc_cmd_blksize(sc);
-	reftag = scsi_get_lba(sc) & 0xffffffff;
+	reftag = (uint32_t)scsi_get_lba(sc); /* Truncate LBA */
 
 #ifdef CONFIG_SCSI_LPFC_DEBUG_FS
-	/* reftag / guard tag are the only errors we can inject here */
-	lpfc_bg_err_inject(phba, sc, &reftag, 0, 0xDEAD);
+	rc = lpfc_bg_err_inject(phba, sc, &reftag, 0, 1);
+	if (rc) {
+		if (rc == BG_ERR_SWAP)
+			lpfc_bg_err_opcodes(phba, sc, &txop, &rxop);
+		if (rc == BG_ERR_CHECK)
+			checking = 0;
+	}
 #endif
 
 	split_offset = 0;
@@ -1729,8 +1994,8 @@ lpfc_bg_setup_bpl_prot(struct lpfc_hba *phba, struct scsi_cmnd *sc,
 		bf_set(pde6_type, pde6, LPFC_PDE6_DESCRIPTOR);
 		bf_set(pde6_optx, pde6, txop);
 		bf_set(pde6_oprx, pde6, rxop);
-		bf_set(pde6_ce, pde6, 1);
-		bf_set(pde6_re, pde6, 1);
+		bf_set(pde6_ce, pde6, checking);
+		bf_set(pde6_re, pde6, checking);
 		bf_set(pde6_ai, pde6, 1);
 		bf_set(pde6_ae, pde6, 0);
 		bf_set(pde6_apptagval, pde6, 0);
@@ -1852,13 +2117,358 @@ out:
 	return num_bde;
 }
 
-/*
+/**
+ * lpfc_bg_setup_sgl - Setup BlockGuard SGL with no protection data
+ * @phba: The Hba for which this call is being executed.
+ * @sc: pointer to scsi command we're working on
+ * @sgl: pointer to buffer list for protection groups
+ * @datacnt: number of segments of data that have been dma mapped
+ *
+ * This function sets up SGL buffer list for protection groups of
+ * type LPFC_PG_TYPE_NO_DIF
+ *
+ * This is usually used when the HBA is instructed to generate
+ * DIFs and insert them into data stream (or strip DIF from
+ * incoming data stream)
+ *
+ * The buffer list consists of just one protection group described
+ * below:
+ *                                +-------------------------+
+ *   start of prot group  -->     |         DI_SEED         |
+ *                                +-------------------------+
+ *                                |         Data SGE        |
+ *                                +-------------------------+
+ *                                |more Data SGE's ... (opt)|
+ *                                +-------------------------+
+ *
+ *
+ * Note: Data s/g buffers have been dma mapped
+ *
+ * Returns the number of SGEs added to the SGL.
+ **/
+static int
+lpfc_bg_setup_sgl(struct lpfc_hba *phba, struct scsi_cmnd *sc,
+		struct sli4_sge *sgl, int datasegcnt)
+{
+	struct scatterlist *sgde = NULL; /* s/g data entry */
+	struct sli4_sge_diseed *diseed = NULL;
+	dma_addr_t physaddr;
+	int i = 0, num_sge = 0, status;
+	int datadir = sc->sc_data_direction;
+	uint32_t reftag;
+	unsigned blksize;
+	uint8_t txop, rxop;
+	uint32_t rc;
+	uint32_t checking = 1;
+	uint32_t dma_len;
+	uint32_t dma_offset = 0;
+
+	status  = lpfc_sc_to_bg_opcodes(phba, sc, &txop, &rxop);
+	if (status)
+		goto out;
+
+	/* extract some info from the scsi command for pde*/
+	blksize = lpfc_cmd_blksize(sc);
+	reftag = (uint32_t)scsi_get_lba(sc); /* Truncate LBA */
+
+#ifdef CONFIG_SCSI_LPFC_DEBUG_FS
+	rc = lpfc_bg_err_inject(phba, sc, &reftag, 0, 1);
+	if (rc) {
+		if (rc == BG_ERR_SWAP)
+			lpfc_bg_err_opcodes(phba, sc, &txop, &rxop);
+		if (rc == BG_ERR_CHECK)
+			checking = 0;
+	}
+#endif
+
+	/* setup DISEED with what we have */
+	diseed = (struct sli4_sge_diseed *) sgl;
+	memset(diseed, 0, sizeof(struct sli4_sge_diseed));
+	bf_set(lpfc_sli4_sge_type, sgl, LPFC_SGE_TYPE_DISEED);
+
+	/* Endianness conversion if necessary */
+	diseed->ref_tag = cpu_to_le32(reftag);
+	diseed->ref_tag_tran = diseed->ref_tag;
+
+	/* setup DISEED with the rest of the info */
+	bf_set(lpfc_sli4_sge_dif_optx, diseed, txop);
+	bf_set(lpfc_sli4_sge_dif_oprx, diseed, rxop);
+	if (datadir == DMA_FROM_DEVICE) {
+		bf_set(lpfc_sli4_sge_dif_ce, diseed, checking);
+		bf_set(lpfc_sli4_sge_dif_re, diseed, checking);
+	}
+	bf_set(lpfc_sli4_sge_dif_ai, diseed, 1);
+	bf_set(lpfc_sli4_sge_dif_me, diseed, 0);
+
+	/* Endianness conversion if necessary for DISEED */
+	diseed->word2 = cpu_to_le32(diseed->word2);
+	diseed->word3 = cpu_to_le32(diseed->word3);
+
+	/* advance bpl and increment sge count */
+	num_sge++;
+	sgl++;
+
+	/* assumption: caller has already run dma_map_sg on command data */
+	scsi_for_each_sg(sc, sgde, datasegcnt, i) {
+		physaddr = sg_dma_address(sgde);
+		dma_len = sg_dma_len(sgde);
+		sgl->addr_lo = cpu_to_le32(putPaddrLow(physaddr));
+		sgl->addr_hi = cpu_to_le32(putPaddrHigh(physaddr));
+		if ((i + 1) == datasegcnt)
+			bf_set(lpfc_sli4_sge_last, sgl, 1);
+		else
+			bf_set(lpfc_sli4_sge_last, sgl, 0);
+		bf_set(lpfc_sli4_sge_offset, sgl, dma_offset);
+		bf_set(lpfc_sli4_sge_type, sgl, LPFC_SGE_TYPE_DATA);
+
+		sgl->sge_len = cpu_to_le32(dma_len);
+		dma_offset += dma_len;
+
+		sgl++;
+		num_sge++;
+	}
+
+out:
+	return num_sge;
+}
+
+/**
+ * lpfc_bg_setup_sgl_prot - Setup BlockGuard SGL with protection data
+ * @phba: The Hba for which this call is being executed.
+ * @sc: pointer to scsi command we're working on
+ * @sgl: pointer to buffer list for protection groups
+ * @datacnt: number of segments of data that have been dma mapped
+ * @protcnt: number of segment of protection data that have been dma mapped
+ *
+ * This function sets up SGL buffer list for protection groups of
+ * type LPFC_PG_TYPE_DIF
+ *
+ * This is usually used when DIFs are in their own buffers,
+ * separate from the data. The HBA can then by instructed
+ * to place the DIFs in the outgoing stream.  For read operations,
+ * The HBA could extract the DIFs and place it in DIF buffers.
+ *
+ * The buffer list for this type consists of one or more of the
+ * protection groups described below:
+ *                                    +-------------------------+
+ *   start of first prot group  -->   |         DISEED          |
+ *                                    +-------------------------+
+ *                                    |      DIF (Prot SGE)     |
+ *                                    +-------------------------+
+ *                                    |        Data SGE         |
+ *                                    +-------------------------+
+ *                                    |more Data SGE's ... (opt)|
+ *                                    +-------------------------+
+ *   start of new  prot group  -->    |         DISEED          |
+ *                                    +-------------------------+
+ *                                    |          ...            |
+ *                                    +-------------------------+
+ *
+ * Note: It is assumed that both data and protection s/g buffers have been
+ *       mapped for DMA
+ *
+ * Returns the number of SGEs added to the SGL.
+ **/
+static int
+lpfc_bg_setup_sgl_prot(struct lpfc_hba *phba, struct scsi_cmnd *sc,
+		struct sli4_sge *sgl, int datacnt, int protcnt)
+{
+	struct scatterlist *sgde = NULL; /* s/g data entry */
+	struct scatterlist *sgpe = NULL; /* s/g prot entry */
+	struct sli4_sge_diseed *diseed = NULL;
+	dma_addr_t dataphysaddr, protphysaddr;
+	unsigned short curr_data = 0, curr_prot = 0;
+	unsigned int split_offset;
+	unsigned int protgroup_len, protgroup_offset = 0, protgroup_remainder;
+	unsigned int protgrp_blks, protgrp_bytes;
+	unsigned int remainder, subtotal;
+	int status;
+	unsigned char pgdone = 0, alldone = 0;
+	unsigned blksize;
+	uint32_t reftag;
+	uint8_t txop, rxop;
+	uint32_t dma_len;
+	uint32_t rc;
+	uint32_t checking = 1;
+	uint32_t dma_offset = 0;
+	int num_sge = 0;
+
+	sgpe = scsi_prot_sglist(sc);
+	sgde = scsi_sglist(sc);
+
+	if (!sgpe || !sgde) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_FCP,
+				"9082 Invalid s/g entry: data=0x%p prot=0x%p\n",
+				sgpe, sgde);
+		return 0;
+	}
+
+	status = lpfc_sc_to_bg_opcodes(phba, sc, &txop, &rxop);
+	if (status)
+		goto out;
+
+	/* extract some info from the scsi command */
+	blksize = lpfc_cmd_blksize(sc);
+	reftag = (uint32_t)scsi_get_lba(sc); /* Truncate LBA */
+
+#ifdef CONFIG_SCSI_LPFC_DEBUG_FS
+	rc = lpfc_bg_err_inject(phba, sc, &reftag, 0, 1);
+	if (rc) {
+		if (rc == BG_ERR_SWAP)
+			lpfc_bg_err_opcodes(phba, sc, &txop, &rxop);
+		if (rc == BG_ERR_CHECK)
+			checking = 0;
+	}
+#endif
+
+	split_offset = 0;
+	do {
+		/* setup DISEED with what we have */
+		diseed = (struct sli4_sge_diseed *) sgl;
+		memset(diseed, 0, sizeof(struct sli4_sge_diseed));
+		bf_set(lpfc_sli4_sge_type, sgl, LPFC_SGE_TYPE_DISEED);
+
+		/* Endianness conversion if necessary */
+		diseed->ref_tag = cpu_to_le32(reftag);
+		diseed->ref_tag_tran = diseed->ref_tag;
+
+		/* setup DISEED with the rest of the info */
+		bf_set(lpfc_sli4_sge_dif_optx, diseed, txop);
+		bf_set(lpfc_sli4_sge_dif_oprx, diseed, rxop);
+		bf_set(lpfc_sli4_sge_dif_ce, diseed, checking);
+		bf_set(lpfc_sli4_sge_dif_re, diseed, checking);
+		bf_set(lpfc_sli4_sge_dif_ai, diseed, 1);
+		bf_set(lpfc_sli4_sge_dif_me, diseed, 0);
+
+		/* Endianness conversion if necessary for DISEED */
+		diseed->word2 = cpu_to_le32(diseed->word2);
+		diseed->word3 = cpu_to_le32(diseed->word3);
+
+		/* advance sgl and increment bde count */
+		num_sge++;
+		sgl++;
+
+		/* setup the first BDE that points to protection buffer */
+		protphysaddr = sg_dma_address(sgpe) + protgroup_offset;
+		protgroup_len = sg_dma_len(sgpe) - protgroup_offset;
+
+		/* must be integer multiple of the DIF block length */
+		BUG_ON(protgroup_len % 8);
+
+		/* Now setup DIF SGE */
+		sgl->word2 = 0;
+		bf_set(lpfc_sli4_sge_type, sgl, LPFC_SGE_TYPE_DIF);
+		sgl->addr_hi = le32_to_cpu(putPaddrHigh(protphysaddr));
+		sgl->addr_lo = le32_to_cpu(putPaddrLow(protphysaddr));
+		sgl->word2 = cpu_to_le32(sgl->word2);
+
+		protgrp_blks = protgroup_len / 8;
+		protgrp_bytes = protgrp_blks * blksize;
+
+		/* check if DIF SGE is crossing the 4K boundary; if so split */
+		if ((sgl->addr_lo & 0xfff) + protgroup_len > 0x1000) {
+			protgroup_remainder = 0x1000 - (sgl->addr_lo & 0xfff);
+			protgroup_offset += protgroup_remainder;
+			protgrp_blks = protgroup_remainder / 8;
+			protgrp_bytes = protgrp_blks * blksize;
+		} else {
+			protgroup_offset = 0;
+			curr_prot++;
+		}
+
+		num_sge++;
+
+		/* setup SGE's for data blocks associated with DIF data */
+		pgdone = 0;
+		subtotal = 0; /* total bytes processed for current prot grp */
+		while (!pgdone) {
+			if (!sgde) {
+				lpfc_printf_log(phba, KERN_ERR, LOG_BG,
+					"9086 BLKGRD:%s Invalid data segment\n",
+						__func__);
+				return 0;
+			}
+			sgl++;
+			dataphysaddr = sg_dma_address(sgde) + split_offset;
+
+			remainder = sg_dma_len(sgde) - split_offset;
+
+			if ((subtotal + remainder) <= protgrp_bytes) {
+				/* we can use this whole buffer */
+				dma_len = remainder;
+				split_offset = 0;
+
+				if ((subtotal + remainder) == protgrp_bytes)
+					pgdone = 1;
+			} else {
+				/* must split this buffer with next prot grp */
+				dma_len = protgrp_bytes - subtotal;
+				split_offset += dma_len;
+			}
+
+			subtotal += dma_len;
+
+			sgl->addr_lo = cpu_to_le32(putPaddrLow(dataphysaddr));
+			sgl->addr_hi = cpu_to_le32(putPaddrHigh(dataphysaddr));
+			bf_set(lpfc_sli4_sge_last, sgl, 0);
+			bf_set(lpfc_sli4_sge_offset, sgl, dma_offset);
+			bf_set(lpfc_sli4_sge_type, sgl, LPFC_SGE_TYPE_DATA);
+
+			sgl->sge_len = cpu_to_le32(dma_len);
+			dma_offset += dma_len;
+
+			num_sge++;
+			curr_data++;
+
+			if (split_offset)
+				break;
+
+			/* Move to the next s/g segment if possible */
+			sgde = sg_next(sgde);
+		}
+
+		if (protgroup_offset) {
+			/* update the reference tag */
+			reftag += protgrp_blks;
+			sgl++;
+			continue;
+		}
+
+		/* are we done ? */
+		if (curr_prot == protcnt) {
+			bf_set(lpfc_sli4_sge_last, sgl, 1);
+			alldone = 1;
+		} else if (curr_prot < protcnt) {
+			/* advance to next prot buffer */
+			sgpe = sg_next(sgpe);
+			sgl++;
+
+			/* update the reference tag */
+			reftag += protgrp_blks;
+		} else {
+			/* if we're here, we have a bug */
+			lpfc_printf_log(phba, KERN_ERR, LOG_BG,
+				"9085 BLKGRD: bug in %s\n", __func__);
+		}
+
+	} while (!alldone);
+
+out:
+
+	return num_sge;
+}
+
+/**
+ * lpfc_prot_group_type - Get prtotection group type of SCSI command
+ * @phba: The Hba for which this call is being executed.
+ * @sc: pointer to scsi command we're working on
+ *
  * Given a SCSI command that supports DIF, determine composition of protection
  * groups involved in setting up buffer lists
  *
- * Returns:
- *			      for DIF (for both read and write)
- * */
+ * Returns: Protection group type (with or without DIF)
+ *
+ **/
 static int
 lpfc_prot_group_type(struct lpfc_hba *phba, struct scsi_cmnd *sc)
 {
@@ -1885,13 +2495,17 @@ lpfc_prot_group_type(struct lpfc_hba *phba, struct scsi_cmnd *sc)
 	return ret;
 }
 
-/*
+/**
+ * lpfc_bg_scsi_prep_dma_buf_s3 - DMA mapping for scsi buffer to SLI3 IF spec
+ * @phba: The Hba for which this call is being executed.
+ * @lpfc_cmd: The scsi buffer which is going to be prep'ed.
+ *
  * This is the protection/DIF aware version of
  * lpfc_scsi_prep_dma_buf(). It may be a good idea to combine the
  * two functions eventually, but for now, it's here
- */
+ **/
 static int
-lpfc_bg_scsi_prep_dma_buf(struct lpfc_hba *phba,
+lpfc_bg_scsi_prep_dma_buf_s3(struct lpfc_hba *phba,
 		struct lpfc_scsi_buf *lpfc_cmd)
 {
 	struct scsi_cmnd *scsi_cmnd = lpfc_cmd->pCmd;
@@ -2147,7 +2761,21 @@ lpfc_parse_bg_err(struct lpfc_hba *phba, struct lpfc_scsi_buf *lpfc_cmd,
 		cmd->sense_buffer[8] = 0;     /* Information descriptor type */
 		cmd->sense_buffer[9] = 0xa;   /* Additional descriptor length */
 		cmd->sense_buffer[10] = 0x80; /* Validity bit */
-		bghm /= cmd->device->sector_size;
+
+		/* bghm is a "on the wire" FC frame based count */
+		switch (scsi_get_prot_op(cmd)) {
+		case SCSI_PROT_READ_INSERT:
+		case SCSI_PROT_WRITE_STRIP:
+			bghm /= cmd->device->sector_size;
+			break;
+		case SCSI_PROT_READ_STRIP:
+		case SCSI_PROT_WRITE_INSERT:
+		case SCSI_PROT_READ_PASS:
+		case SCSI_PROT_WRITE_PASS:
+			bghm /= (cmd->device->sector_size +
+				sizeof(struct scsi_dif_tuple));
+			break;
+		}
 
 		failing_sector = scsi_get_lba(cmd);
 		failing_sector += bghm;
@@ -2292,6 +2920,180 @@ lpfc_scsi_prep_dma_buf_s4(struct lpfc_hba *phba, struct lpfc_scsi_buf *lpfc_cmd)
 }
 
 /**
+ * lpfc_bg_scsi_adjust_dl - Adjust SCSI data length for BlockGuard
+ * @phba: The Hba for which this call is being executed.
+ * @lpfc_cmd: The scsi buffer which is going to be adjusted.
+ *
+ * Adjust the data length to account for how much data
+ * is actually on the wire.
+ *
+ * returns the adjusted data length
+ **/
+static int
+lpfc_bg_scsi_adjust_dl(struct lpfc_hba *phba,
+		struct lpfc_scsi_buf *lpfc_cmd)
+{
+	struct scsi_cmnd *sc = lpfc_cmd->pCmd;
+	int diflen, fcpdl;
+	unsigned blksize;
+
+	fcpdl = scsi_bufflen(sc);
+
+	/* Check if there is protection data on the wire */
+	if (sc->sc_data_direction == DMA_FROM_DEVICE) {
+		/* Read */
+		if (scsi_get_prot_op(sc) ==  SCSI_PROT_READ_INSERT)
+			return fcpdl;
+
+	} else {
+		/* Write */
+		if (scsi_get_prot_op(sc) ==  SCSI_PROT_WRITE_STRIP)
+			return fcpdl;
+	}
+
+	/* If protection data on the wire, adjust the count accordingly */
+	blksize = lpfc_cmd_blksize(sc);
+	diflen = (fcpdl / blksize) * 8;
+	fcpdl += diflen;
+	return fcpdl;
+}
+
+/**
+ * lpfc_bg_scsi_prep_dma_buf_s4 - DMA mapping for scsi buffer to SLI4 IF spec
+ * @phba: The Hba for which this call is being executed.
+ * @lpfc_cmd: The scsi buffer which is going to be mapped.
+ *
+ * This is the protection/DIF aware version of
+ * lpfc_scsi_prep_dma_buf(). It may be a good idea to combine the
+ * two functions eventually, but for now, it's here
+ **/
+static int
+lpfc_bg_scsi_prep_dma_buf_s4(struct lpfc_hba *phba,
+		struct lpfc_scsi_buf *lpfc_cmd)
+{
+	struct scsi_cmnd *scsi_cmnd = lpfc_cmd->pCmd;
+	struct fcp_cmnd *fcp_cmnd = lpfc_cmd->fcp_cmnd;
+	struct sli4_sge *sgl = (struct sli4_sge *)(lpfc_cmd->fcp_bpl);
+	IOCB_t *iocb_cmd = &lpfc_cmd->cur_iocbq.iocb;
+	uint32_t num_bde = 0;
+	int datasegcnt, protsegcnt, datadir = scsi_cmnd->sc_data_direction;
+	int prot_group_type = 0;
+	int fcpdl;
+
+	/*
+	 * Start the lpfc command prep by bumping the sgl beyond fcp_cmnd
+	 *  fcp_rsp regions to the first data bde entry
+	 */
+	if (scsi_sg_count(scsi_cmnd)) {
+		/*
+		 * The driver stores the segment count returned from pci_map_sg
+		 * because this a count of dma-mappings used to map the use_sg
+		 * pages.  They are not guaranteed to be the same for those
+		 * architectures that implement an IOMMU.
+		 */
+		datasegcnt = dma_map_sg(&phba->pcidev->dev,
+					scsi_sglist(scsi_cmnd),
+					scsi_sg_count(scsi_cmnd), datadir);
+		if (unlikely(!datasegcnt))
+			return 1;
+
+		sgl += 1;
+		/* clear the last flag in the fcp_rsp map entry */
+		sgl->word2 = le32_to_cpu(sgl->word2);
+		bf_set(lpfc_sli4_sge_last, sgl, 0);
+		sgl->word2 = cpu_to_le32(sgl->word2);
+
+		sgl += 1;
+		lpfc_cmd->seg_cnt = datasegcnt;
+		if (lpfc_cmd->seg_cnt > phba->cfg_sg_seg_cnt) {
+			lpfc_printf_log(phba, KERN_ERR, LOG_BG,
+					"9087 BLKGRD: %s: Too many sg segments"
+					" from dma_map_sg.  Config %d, seg_cnt"
+					" %d\n",
+					__func__, phba->cfg_sg_seg_cnt,
+					lpfc_cmd->seg_cnt);
+			scsi_dma_unmap(scsi_cmnd);
+			return 1;
+		}
+
+		prot_group_type = lpfc_prot_group_type(phba, scsi_cmnd);
+
+		switch (prot_group_type) {
+		case LPFC_PG_TYPE_NO_DIF:
+			num_bde = lpfc_bg_setup_sgl(phba, scsi_cmnd, sgl,
+					datasegcnt);
+			/* we should have 2 or more entries in buffer list */
+			if (num_bde < 2)
+				goto err;
+			break;
+		case LPFC_PG_TYPE_DIF_BUF:{
+			/*
+			 * This type indicates that protection buffers are
+			 * passed to the driver, so that needs to be prepared
+			 * for DMA
+			 */
+			protsegcnt = dma_map_sg(&phba->pcidev->dev,
+					scsi_prot_sglist(scsi_cmnd),
+					scsi_prot_sg_count(scsi_cmnd), datadir);
+			if (unlikely(!protsegcnt)) {
+				scsi_dma_unmap(scsi_cmnd);
+				return 1;
+			}
+
+			lpfc_cmd->prot_seg_cnt = protsegcnt;
+			if (lpfc_cmd->prot_seg_cnt
+			    > phba->cfg_prot_sg_seg_cnt) {
+				lpfc_printf_log(phba, KERN_ERR, LOG_BG,
+					"9088 BLKGRD: %s: Too many prot sg "
+					"segments from dma_map_sg.  Config %d,"
+						"prot_seg_cnt %d\n", __func__,
+						phba->cfg_prot_sg_seg_cnt,
+						lpfc_cmd->prot_seg_cnt);
+				dma_unmap_sg(&phba->pcidev->dev,
+					     scsi_prot_sglist(scsi_cmnd),
+					     scsi_prot_sg_count(scsi_cmnd),
+					     datadir);
+				scsi_dma_unmap(scsi_cmnd);
+				return 1;
+			}
+
+			num_bde = lpfc_bg_setup_sgl_prot(phba, scsi_cmnd, sgl,
+					datasegcnt, protsegcnt);
+			/* we should have 3 or more entries in buffer list */
+			if (num_bde < 3)
+				goto err;
+			break;
+		}
+		case LPFC_PG_TYPE_INVALID:
+		default:
+			lpfc_printf_log(phba, KERN_ERR, LOG_FCP,
+					"9083 Unexpected protection group %i\n",
+					prot_group_type);
+			return 1;
+		}
+	}
+
+	fcpdl = lpfc_bg_scsi_adjust_dl(phba, lpfc_cmd);
+
+	fcp_cmnd->fcpDl = be32_to_cpu(fcpdl);
+
+	/*
+	 * Due to difference in data length between DIF/non-DIF paths,
+	 * we need to set word 4 of IOCB here
+	 */
+	iocb_cmd->un.fcpi.fcpi_parm = fcpdl;
+	lpfc_cmd->cur_iocbq.iocb_flag |= LPFC_IO_DIF;
+
+	return 0;
+err:
+	lpfc_printf_log(phba, KERN_ERR, LOG_FCP,
+			"9084 Could not setup all needed BDE's"
+			"prot_group_type=%d, num_bde=%d\n",
+			prot_group_type, num_bde);
+	return 1;
+}
+
+/**
  * lpfc_scsi_prep_dma_buf - Wrapper function for DMA mapping of scsi buffer
  * @phba: The Hba for which this call is being executed.
  * @lpfc_cmd: The scsi buffer which is going to be mapped.
@@ -2310,6 +3112,25 @@ lpfc_scsi_prep_dma_buf(struct lpfc_hba *phba, struct lpfc_scsi_buf *lpfc_cmd)
 }
 
 /**
+ * lpfc_bg_scsi_prep_dma_buf - Wrapper function for DMA mapping of scsi buffer
+ * using BlockGuard.
+ * @phba: The Hba for which this call is being executed.
+ * @lpfc_cmd: The scsi buffer which is going to be mapped.
+ *
+ * This routine wraps the actual DMA mapping function pointer from the
+ * lpfc_hba struct.
+ *
+ * Return codes:
+ *	1 - Error
+ *	0 - Success
+ **/
+static inline int
+lpfc_bg_scsi_prep_dma_buf(struct lpfc_hba *phba, struct lpfc_scsi_buf *lpfc_cmd)
+{
+	return phba->lpfc_bg_scsi_prep_dma_buf(phba, lpfc_cmd);
+}
+
+/**
  * lpfc_send_scsi_error_event - Posts an event when there is SCSI error
  * @phba: Pointer to hba context object.
  * @vport: Pointer to vport object.
@@ -3072,12 +3893,14 @@ lpfc_scsi_api_table_setup(struct lpfc_hba *phba, uint8_t dev_grp)
 	case LPFC_PCI_DEV_LP:
 		phba->lpfc_new_scsi_buf = lpfc_new_scsi_buf_s3;
 		phba->lpfc_scsi_prep_dma_buf = lpfc_scsi_prep_dma_buf_s3;
+		phba->lpfc_bg_scsi_prep_dma_buf = lpfc_bg_scsi_prep_dma_buf_s3;
 		phba->lpfc_release_scsi_buf = lpfc_release_scsi_buf_s3;
 		phba->lpfc_get_scsi_buf = lpfc_get_scsi_buf_s3;
 		break;
 	case LPFC_PCI_DEV_OC:
 		phba->lpfc_new_scsi_buf = lpfc_new_scsi_buf_s4;
 		phba->lpfc_scsi_prep_dma_buf = lpfc_scsi_prep_dma_buf_s4;
+		phba->lpfc_bg_scsi_prep_dma_buf = lpfc_bg_scsi_prep_dma_buf_s4;
 		phba->lpfc_release_scsi_buf = lpfc_release_scsi_buf_s4;
 		phba->lpfc_get_scsi_buf = lpfc_get_scsi_buf_s4;
 		break;
@@ -3250,8 +4073,7 @@ lpfc_queuecommand_lck(struct scsi_cmnd *cmnd, void (*done) (struct scsi_cmnd *))
 	ndlp = rdata->pnode;
 
 	if ((scsi_get_prot_op(cmnd) != SCSI_PROT_NORMAL) &&
-		(!(phba->sli3_options & LPFC_SLI3_BG_ENABLED) ||
-		(phba->sli_rev == LPFC_SLI_REV4))) {
+		(!(phba->sli3_options & LPFC_SLI3_BG_ENABLED))) {
 
 		lpfc_printf_log(phba, KERN_ERR, LOG_BG,
 				"9058 BLKGRD: ERROR: rcvd protected cmd:%02x"
diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c
index 1a391e2df3b..73da1c039b9 100644
--- a/drivers/scsi/lpfc/lpfc_sli.c
+++ b/drivers/scsi/lpfc/lpfc_sli.c
@@ -7839,12 +7839,16 @@ lpfc_sli4_iocb2wqe(struct lpfc_hba *phba, struct lpfc_iocbq *iocbq,
 		bf_set(wqe_lnk, &wqe->fcp_iwrite.wqe_com, iocbq->iocb.ulpXS);
 		/* Always open the exchange */
 		bf_set(wqe_xc, &wqe->fcp_iwrite.wqe_com, 0);
-		bf_set(wqe_dbde, &wqe->fcp_iwrite.wqe_com, 1);
 		bf_set(wqe_iod, &wqe->fcp_iwrite.wqe_com, LPFC_WQE_IOD_WRITE);
 		bf_set(wqe_lenloc, &wqe->fcp_iwrite.wqe_com,
 		       LPFC_WQE_LENLOC_WORD4);
 		bf_set(wqe_ebde_cnt, &wqe->fcp_iwrite.wqe_com, 0);
 		bf_set(wqe_pu, &wqe->fcp_iwrite.wqe_com, iocbq->iocb.ulpPU);
+		if (iocbq->iocb_flag & LPFC_IO_DIF) {
+			iocbq->iocb_flag &= ~LPFC_IO_DIF;
+			bf_set(wqe_dif, &wqe->generic.wqe_com, 1);
+		}
+		bf_set(wqe_dbde, &wqe->fcp_iwrite.wqe_com, 1);
 		break;
 	case CMD_FCP_IREAD64_CR:
 		/* word3 iocb=iotag wqe=payload_offset_len */
@@ -7858,12 +7862,16 @@ lpfc_sli4_iocb2wqe(struct lpfc_hba *phba, struct lpfc_iocbq *iocbq,
 		bf_set(wqe_lnk, &wqe->fcp_iread.wqe_com, iocbq->iocb.ulpXS);
 		/* Always open the exchange */
 		bf_set(wqe_xc, &wqe->fcp_iread.wqe_com, 0);
-		bf_set(wqe_dbde, &wqe->fcp_iread.wqe_com, 1);
 		bf_set(wqe_iod, &wqe->fcp_iread.wqe_com, LPFC_WQE_IOD_READ);
 		bf_set(wqe_lenloc, &wqe->fcp_iread.wqe_com,
 		       LPFC_WQE_LENLOC_WORD4);
 		bf_set(wqe_ebde_cnt, &wqe->fcp_iread.wqe_com, 0);
 		bf_set(wqe_pu, &wqe->fcp_iread.wqe_com, iocbq->iocb.ulpPU);
+		if (iocbq->iocb_flag & LPFC_IO_DIF) {
+			iocbq->iocb_flag &= ~LPFC_IO_DIF;
+			bf_set(wqe_dif, &wqe->generic.wqe_com, 1);
+		}
+		bf_set(wqe_dbde, &wqe->fcp_iread.wqe_com, 1);
 		break;
 	case CMD_FCP_ICMND64_CR:
 		/* word3 iocb=IO_TAG wqe=reserved */
@@ -10672,12 +10680,14 @@ lpfc_sli4_iocb_param_transfer(struct lpfc_hba *phba,
 			      struct lpfc_wcqe_complete *wcqe)
 {
 	unsigned long iflags;
+	uint32_t status;
 	size_t offset = offsetof(struct lpfc_iocbq, iocb);
 
 	memcpy((char *)pIocbIn + offset, (char *)pIocbOut + offset,
 	       sizeof(struct lpfc_iocbq) - offset);
 	/* Map WCQE parameters into irspiocb parameters */
-	pIocbIn->iocb.ulpStatus = bf_get(lpfc_wcqe_c_status, wcqe);
+	status = bf_get(lpfc_wcqe_c_status, wcqe);
+	pIocbIn->iocb.ulpStatus = (status & LPFC_IOCB_STATUS_MASK);
 	if (pIocbOut->iocb_flag & LPFC_IO_FCP)
 		if (pIocbIn->iocb.ulpStatus == IOSTAT_FCP_RSP_ERROR)
 			pIocbIn->iocb.un.fcpi.fcpi_parm =
@@ -10690,6 +10700,44 @@ lpfc_sli4_iocb_param_transfer(struct lpfc_hba *phba,
 		pIocbIn->iocb.un.genreq64.bdl.bdeSize = wcqe->total_data_placed;
 	}
 
+	/* Convert BG errors for completion status */
+	if (status == CQE_STATUS_DI_ERROR) {
+		pIocbIn->iocb.ulpStatus = IOSTAT_LOCAL_REJECT;
+
+		if (bf_get(lpfc_wcqe_c_bg_edir, wcqe))
+			pIocbIn->iocb.un.ulpWord[4] = IOERR_RX_DMA_FAILED;
+		else
+			pIocbIn->iocb.un.ulpWord[4] = IOERR_TX_DMA_FAILED;
+
+		pIocbIn->iocb.unsli3.sli3_bg.bgstat = 0;
+		if (bf_get(lpfc_wcqe_c_bg_ge, wcqe)) /* Guard Check failed */
+			pIocbIn->iocb.unsli3.sli3_bg.bgstat |=
+				BGS_GUARD_ERR_MASK;
+		if (bf_get(lpfc_wcqe_c_bg_ae, wcqe)) /* App Tag Check failed */
+			pIocbIn->iocb.unsli3.sli3_bg.bgstat |=
+				BGS_APPTAG_ERR_MASK;
+		if (bf_get(lpfc_wcqe_c_bg_re, wcqe)) /* Ref Tag Check failed */
+			pIocbIn->iocb.unsli3.sli3_bg.bgstat |=
+				BGS_REFTAG_ERR_MASK;
+
+		/* Check to see if there was any good data before the error */
+		if (bf_get(lpfc_wcqe_c_bg_tdpv, wcqe)) {
+			pIocbIn->iocb.unsli3.sli3_bg.bgstat |=
+				BGS_HI_WATER_MARK_PRESENT_MASK;
+			pIocbIn->iocb.unsli3.sli3_bg.bghm =
+				wcqe->total_data_placed;
+		}
+
+		/*
+		* Set ALL the error bits to indicate we don't know what
+		* type of error it is.
+		*/
+		if (!pIocbIn->iocb.unsli3.sli3_bg.bgstat)
+			pIocbIn->iocb.unsli3.sli3_bg.bgstat |=
+				(BGS_REFTAG_ERR_MASK | BGS_APPTAG_ERR_MASK |
+				BGS_GUARD_ERR_MASK);
+	}
+
 	/* Pick up HBA exchange busy condition */
 	if (bf_get(lpfc_wcqe_c_xb, wcqe)) {
 		spin_lock_irqsave(&phba->hbalock, iflags);
diff --git a/drivers/scsi/lpfc/lpfc_sli.h b/drivers/scsi/lpfc/lpfc_sli.h
index 29c13b63e32..3290b8e7ab6 100644
--- a/drivers/scsi/lpfc/lpfc_sli.h
+++ b/drivers/scsi/lpfc/lpfc_sli.h
@@ -69,6 +69,7 @@ struct lpfc_iocbq {
 #define LPFC_USE_FCPWQIDX	0x80    /* Submit to specified FCPWQ index */
 #define DSS_SECURITY_OP		0x100	/* security IO */
 #define LPFC_IO_ON_Q		0x200	/* The IO is still on the TXCMPLQ */
+#define LPFC_IO_DIF		0x400	/* T10 DIF IO */
 
 #define LPFC_FIP_ELS_ID_MASK	0xc000	/* ELS_ID range 0-3, non-shifted mask */
 #define LPFC_FIP_ELS_ID_SHIFT	14