diff options
| author | Richard Röjfors <richard.rojfors.ext@mocean-labs.com> | 2009-06-05 15:40:32 +0200 |
|---|---|---|
| committer | Ben Dooks <ben-linux@fluff.org> | 2009-06-13 10:39:28 +0100 |
| commit | dd14be4c274fc484eccace03ae9726e516630331 (patch) | |
| tree | 3b8cfb3a060b9f1232d37de749b82c659248e8c5 | |
| parent | 7d85ccd816535f56880f7dfdb4de056794376b2c (diff) | |
i2c-ocores: Can add I2C devices to the bus
There is sometimes a need for the ocores driver to add devices to the
bus when installed.
i2c_register_board_info can not always be used, because the I2C devices
are not known at an early state, they could for instance be connected
on a I2C bus on a PCI device which has the Open Cores IP.
i2c_new_device can not be used in all cases either since the resulting
bus nummer might be unknown.
The solution is the pass a list of I2C devices in the platform data to
the Open Cores driver. This is useful for MFD drivers.
Signed-off-by: Richard Röjfors <richard.rojfors.ext@mocean-labs.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
| -rw-r--r-- | Documentation/i2c/busses/i2c-ocores | 17 | ||||
| -rw-r--r-- | drivers/i2c/busses/i2c-ocores.c | 5 | ||||
| -rw-r--r-- | include/linux/i2c-ocores.h | 2 |
3 files changed, 24 insertions, 0 deletions
diff --git a/Documentation/i2c/busses/i2c-ocores b/Documentation/i2c/busses/i2c-ocores index cfcebb10d14..c269aaa2f26 100644 --- a/Documentation/i2c/busses/i2c-ocores +++ b/Documentation/i2c/busses/i2c-ocores @@ -20,6 +20,8 @@ platform_device with the base address and interrupt number. The dev.platform_data of the device should also point to a struct ocores_i2c_platform_data (see linux/i2c-ocores.h) describing the distance between registers and the input clock speed. +There is also a possibility to attach a list of i2c_board_info which +the i2c-ocores driver will add to the bus upon creation. E.G. something like: @@ -36,9 +38,24 @@ static struct resource ocores_resources[] = { }, }; +/* optional board info */ +struct i2c_board_info ocores_i2c_board_info[] = { + { + I2C_BOARD_INFO("tsc2003", 0x48), + .platform_data = &tsc2003_platform_data, + .irq = TSC_IRQ + }, + { + I2C_BOARD_INFO("adv7180", 0x42 >> 1), + .irq = ADV_IRQ + } +}; + static struct ocores_i2c_platform_data myi2c_data = { .regstep = 2, /* two bytes between registers */ .clock_khz = 50000, /* input clock of 50MHz */ + .devices = ocores_i2c_board_info, /* optional table of devices */ + .num_devices = ARRAY_SIZE(ocores_i2c_board_info), /* table size */ }; static struct platform_device myi2c = { diff --git a/drivers/i2c/busses/i2c-ocores.c b/drivers/i2c/busses/i2c-ocores.c index e5193bf7548..3542c6ba98f 100644 --- a/drivers/i2c/busses/i2c-ocores.c +++ b/drivers/i2c/busses/i2c-ocores.c @@ -216,6 +216,7 @@ static int __devinit ocores_i2c_probe(struct platform_device *pdev) struct ocores_i2c_platform_data *pdata; struct resource *res, *res2; int ret; + int i; res = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (!res) @@ -271,6 +272,10 @@ static int __devinit ocores_i2c_probe(struct platform_device *pdev) goto add_adapter_failed; } + /* add in known devices to the bus */ + for (i = 0; i < pdata->num_devices; i++) + i2c_new_device(&i2c->adap, pdata->devices + i); + return 0; add_adapter_failed: diff --git a/include/linux/i2c-ocores.h b/include/linux/i2c-ocores.h index 8ed591b0887..4d5e57ff661 100644 --- a/include/linux/i2c-ocores.h +++ b/include/linux/i2c-ocores.h @@ -14,6 +14,8 @@ struct ocores_i2c_platform_data { u32 regstep; /* distance between registers */ u32 clock_khz; /* input clock in kHz */ + u8 num_devices; /* number of devices in the devices list */ + struct i2c_board_info const *devices; /* devices connected to the bus */ }; #endif /* _LINUX_I2C_OCORES_H */ |