diff options
| author | Paul Mackerras <paulus@samba.org> | 2006-03-28 10:22:10 +1100 |
|---|---|---|
| committer | Paul Mackerras <paulus@samba.org> | 2006-03-28 10:22:10 +1100 |
| commit | 0a26b1364f14852bc9a51db0ca63c5250c775627 (patch) | |
| tree | 83422473cb4bf4c450012cded06288a0dc6abedf | |
| parent | ff2e6d7e27cf1f757ab0d97e1a9e46de47152a0e (diff) | |
ppc: Remove CHRP, POWER3 and POWER4 support from arch/ppc
32-bit CHRP machines are now supported only in arch/powerpc, as are
all 64-bit PowerPC processors. This means that we don't use
Open Firmware on any platform in arch/ppc any more.
This makes PReP support a single-platform option like every other
platform support option in arch/ppc now, thus CONFIG_PPC_MULTIPLATFORM
is gone from arch/ppc. CONFIG_PPC_PREP is the option that selects
PReP support and is generally what has replaced
CONFIG_PPC_MULTIPLATFORM within arch/ppc.
_machine is all but dead now, being #defined to 0.
Updated Makefiles, comments and Kconfig options generally to reflect
these changes.
Signed-off-by: Paul Mackerras <paulus@samba.org>
46 files changed, 61 insertions, 9700 deletions
diff --git a/arch/ppc/Kconfig b/arch/ppc/Kconfig index 75802ca0f8c..e9a8f5d1dfc 100644 --- a/arch/ppc/Kconfig +++ b/arch/ppc/Kconfig @@ -61,15 +61,15 @@ config 6xx select PPC_FPU help There are four types of PowerPC chips supported. The more common - types (601, 603, 604, 740, 750, 7400), the Motorola embedded - versions (821, 823, 850, 855, 860, 52xx, 82xx, 83xx), the IBM - embedded versions (403 and 405) and the POWER3 processor. - (For support for more recent 64-bit processors, set ARCH=powerpc.) + types (601, 603, 604, 740, 750, 7400), the older Freescale + (formerly Motorola) embedded versions (821, 823, 850, 855, 860, + 52xx, 82xx, 83xx), the IBM embedded versions (403 and 405) and + the Book E embedded processors from IBM (44x) and Freescale (85xx). + For support for 64-bit processors, set ARCH=powerpc. Unless you are building a kernel for one of the embedded processor - systems or a POWER3-based IBM RS/6000, choose 6xx. - Note that the kernel runs in 32-bit mode even on 64-bit chips. - Also note that because the 52xx, 82xx, & 83xx family has a 603e core, - specific support for that chipset is asked later on. + systems, choose 6xx. + Also note that because the 52xx, 82xx, & 83xx family have a 603e + core, specific support for that chipset is asked later on. config 40x bool "40x" @@ -77,10 +77,6 @@ config 40x config 44x bool "44x" -config POWER3 - select PPC_FPU - bool "POWER3" - config 8xx bool "8xx" @@ -252,14 +248,9 @@ config PPC601_SYNC_FIX source arch/ppc/platforms/4xx/Kconfig source arch/ppc/platforms/85xx/Kconfig -config PPC64BRIDGE - bool - depends on POWER3 - default y - config PPC_STD_MMU bool - depends on 6xx || POWER3 + depends on 6xx default y config NOT_COHERENT_CACHE @@ -534,8 +525,8 @@ endmenu choice prompt "Machine Type" - depends on 6xx || POWER3 - default PPC_MULTIPLATFORM + depends on 6xx + default PPC_PREP ---help--- Linux currently supports several different kinds of PowerPC-based machines: Apple Power Macintoshes and clones (such as the Motorola @@ -545,15 +536,14 @@ choice Platform) machines (including all of the recent IBM RS/6000 and pSeries machines), and several embedded PowerPC systems containing 4xx, 6xx, 7xx, 8xx, 74xx, and 82xx processors. Currently, the - default option is to build a kernel which works on PReP and CHRP. + default option is to build a kernel which works on PReP. - Note that support for Apple machines is now only available with - ARCH=powerpc, and has been removed from this menu. If you wish - to build a kernel for an Apple machine, exit this configuration - process and re-run it with ARCH=powerpc. + Note that support for Apple and CHRP machines is now only available + with ARCH=powerpc, and has been removed from this menu. If you + wish to build a kernel for an Apple or CHRP machine, exit this + configuration process and re-run it with ARCH=powerpc. - Select CHRP/PReP if configuring for an IBM RS/6000 or - pSeries machine, or a PReP machine. + Select PReP if configuring for a PReP machine. Select Gemini if configuring for a Synergy Microsystems' Gemini series Single Board Computer. More information is available at: @@ -562,8 +552,8 @@ choice Select APUS if configuring for a PowerUP Amiga. More information is available at: <http://linux-apus.sourceforge.net/>. -config PPC_MULTIPLATFORM - bool "CHRP/PReP" +config PPC_PREP + bool "PReP" config APUS bool "Amiga-APUS" @@ -807,25 +797,6 @@ config CPM2 you wish to build a kernel for a machine with a CPM2 coprocessor on it (826x, 827x, 8560). -config PPC_CHRP - bool "Support for CHRP (Common Hardware Reference Platform) machines" - depends on PPC_MULTIPLATFORM - select PPC_I8259 - select PPC_INDIRECT_PCI - default y - -config PPC_PREP - bool "Support for PReP (PowerPC Reference Platform) machines" - depends on PPC_MULTIPLATFORM - select PPC_I8259 - select PPC_INDIRECT_PCI - default y - -config PPC_OF - bool - depends on PPC_CHRP - default y - config PPC_GEN550 bool depends on SANDPOINT || SPRUCE || PPLUS || \ @@ -984,14 +955,6 @@ source "mm/Kconfig" source "fs/Kconfig.binfmt" -config PROC_DEVICETREE - bool "Support for Open Firmware device tree in /proc" - depends on PPC_OF && PROC_FS - help - This option adds a device-tree directory under /proc which contains - an image of the device tree that the kernel copies from Open - Firmware. If unsure, say Y here. - config PREP_RESIDUAL bool "Support for PReP Residual Data" depends on PPC_PREP @@ -1184,8 +1147,7 @@ menu "Bus options" config ISA bool "Support for ISA-bus hardware" - depends on PPC_PREP || PPC_CHRP - select PPC_I8259 + depends on PPC_PREP help Find out whether you have ISA slots on your motherboard. ISA is the name of a bus system, i.e. the way the CPU talks to the other stuff @@ -1195,18 +1157,18 @@ config ISA config GENERIC_ISA_DMA bool - depends on POWER3 || 6xx && !CPM2 + depends on 6xx && !CPM2 default y config PPC_I8259 bool - default y if 85xx + default y if 85xx || PPC_PREP default n config PPC_INDIRECT_PCI bool depends on PCI - default y if 40x || 44x || 85xx || 83xx + default y if 40x || 44x || 85xx || 83xx || PPC_PREP default n config EISA @@ -1397,7 +1359,7 @@ config CONSISTENT_SIZE config BOOT_LOAD_BOOL bool "Set the boot link/load address" - depends on ADVANCED_OPTIONS && !PPC_MULTIPLATFORM + depends on ADVANCED_OPTIONS && !PPC_PREP help This option allows you to set the initial load address of the zImage or zImage.initrd file. This can be useful if you are on a board diff --git a/arch/ppc/Kconfig.debug b/arch/ppc/Kconfig.debug index 8cc75abf3d8..f94b8774097 100644 --- a/arch/ppc/Kconfig.debug +++ b/arch/ppc/Kconfig.debug @@ -53,13 +53,6 @@ config BDI_SWITCH Unless you are intending to debug the kernel with one of these machines, say N here. -config BOOTX_TEXT - bool "Support for early boot text console (BootX or OpenFirmware only)" - depends PPC_OF - help - Say Y here to see progress messages from the boot firmware in text - mode. Requires either BootX or Open Firmware. - config SERIAL_TEXT_DEBUG bool "Support for early boot texts over serial port" depends on 4xx || LOPEC || MV64X60 || PPLUS || PRPMC800 || \ diff --git a/arch/ppc/Makefile b/arch/ppc/Makefile index cde5fa87f45..e250f8333ed 100644 --- a/arch/ppc/Makefile +++ b/arch/ppc/Makefile @@ -40,10 +40,8 @@ ifndef CONFIG_FSL_BOOKE CFLAGS += -mstring endif -cpu-as-$(CONFIG_PPC64BRIDGE) += -Wa,-mppc64bridge cpu-as-$(CONFIG_4xx) += -Wa,-m405 cpu-as-$(CONFIG_6xx) += -Wa,-maltivec -cpu-as-$(CONFIG_POWER4) += -Wa,-maltivec cpu-as-$(CONFIG_E500) += -Wa,-me500 cpu-as-$(CONFIG_E200) += -Wa,-me200 diff --git a/arch/ppc/boot/Makefile b/arch/ppc/boot/Makefile index 84eec0bef93..b739e25d472 100644 --- a/arch/ppc/boot/Makefile +++ b/arch/ppc/boot/Makefile @@ -19,14 +19,13 @@ HOSTCFLAGS += -Iarch/$(ARCH)/boot/include BOOT_TARGETS = zImage zImage.initrd znetboot znetboot.initrd bootdir-y := simple -bootdir-$(CONFIG_PPC_OF) += openfirmware subdir-y := lib common images -subdir-$(CONFIG_PPC_MULTIPLATFORM) += of1275 +subdir-$(CONFIG_PPC_PREP) += of1275 # for cleaning -subdir- += simple openfirmware +subdir- += simple -hostprogs-y := $(addprefix utils/, addnote mknote hack-coff mkprep mkbugboot mktree) +hostprogs-y := $(addprefix utils/, mkprep mkbugboot mktree) PHONY += $(BOOT_TARGETS) $(bootdir-y) diff --git a/arch/ppc/boot/openfirmware/Makefile b/arch/ppc/boot/openfirmware/Makefile deleted file mode 100644 index 66b73974375..00000000000 --- a/arch/ppc/boot/openfirmware/Makefile +++ /dev/null @@ -1,109 +0,0 @@ -# Makefile for making bootable images on various OpenFirmware machines. -# -# This file is included by the global makefile so that you can add your own -# architecture-specific flags and dependencies. -# -# Paul Mackerras January 1997 -# XCOFF bootable images for PowerMacs -# Geert Uytterhoeven September 1997 -# ELF bootable iamges for CHRP machines. -# Tom Rini January 2001 -# Cleaned up, moved into arch/ppc/boot/pmac -# Tom Rini July/August 2002 -# Merged 'chrp' and 'pmac' into 'openfirmware', and cleaned up the -# rules. - -zImage.initrd znetboot.initrd: del-ramdisk-sec := -R .ramdisk -zImage.initrd znetboot.initrd: initrd := .initrd - - -boot := arch/ppc/boot -common := $(boot)/common -utils := $(boot)/utils -bootlib := $(boot)/lib -of1275 := $(boot)/of1275 -images := $(boot)/images - -CHRP_LD_ARGS := -T $(srctree)/$(boot)/ld.script -e _start -Ttext 0x00800000 - -COMMONOBJS := start.o misc.o common.o -CHRPOBJS := crt0.o $(COMMONOBJS) chrpmain.o - -targets := $(CHRPOBJS) dummy.o -CHRPOBJS := $(addprefix $(obj)/, $(CHRPOBJS)) - -LIBS := lib/lib.a $(bootlib)/lib.a $(of1275)/lib.a $(common)/lib.a - -ifdef CONFIG_SMP -END := .smp -endif -ifdef CONFIG_PPC64BRIDGE -END += .64 -endif - - -$(images)/ramdisk.image.gz: - @echo ' MISSING $@' - @echo ' RAM disk image must be provided separately' - @/bin/false - -quiet_cmd_genimage = GEN $@ - cmd_genimage = $(OBJCOPY) -R .comment \ - --add-section=.image=$(images)/vmlinux.gz \ - --set-section-flags=.image=contents,alloc,load,readonly,data $< $@ - -targets += image.o -$(obj)/image.o: $(obj)/dummy.o $(images)/vmlinux.gz FORCE - $(call if_changed,genimage) - -# Place the ramdisk in the initrd image. -quiet_cmd_genimage-initrd = GEN $@ - cmd_genimage-initrd = $(OBJCOPY) $< $@ \ - --add-section=.ramdisk=$(images)/ramdisk.image.gz \ - --set-section-flags=.ramdisk=contents,alloc,load,readonly,data -targets += image.initrd.o -$(obj)/image.initrd.o: $(obj)/image.o $(images)/ramdisk.image.gz FORCE - $(call if_changed,genimage-initrd) - - -targets += crt0.o -$(obj)/crt0.o: $(common)/crt0.S FORCE - $(call if_changed_dep,as_o_S) - -quiet_cmd_gen-chrp = CHRP $@ - cmd_gen-chrp = $(LD) $(CHRP_LD_ARGS) -o $@ $(CHRPOBJS) $< $(LIBS) && \ - $(OBJCOPY) $@ $@ -R .comment $(del-ramdisk-sec) - -$(images)/zImage.chrp: $(obj)/image.o $(CHRPOBJS) $(LIBS) \ - $(srctree)/$(boot)/ld.script - $(call cmd,gen-chrp) -$(images)/zImage.initrd.chrp: $(obj)/image.initrd.o $(CHRPOBJS) $(LIBS) \ - $(srctree)/$(boot)/ld.script - $(call cmd,gen-chrp) - -quiet_cmd_addnote = ADDNOTE $@ - cmd_addnote = cat $< > $@ && $(utils)/addnote $@ -$(images)/zImage.chrp-rs6k $(images)/zImage.initrd.chrp-rs6k: \ - %-rs6k: % - $(call cmd,addnote) - -# The targets used on the make command-line - -PHONY += zImage zImage.initrd -zImage: $(images)/zImage.chrp \ - $(images)/zImage.chrp-rs6k - @echo ' kernel: $@ is ready ($<)' -zImage.initrd: $(images)/zImage.initrd.chrp \ - $(images)/zImage.initrd.chrp-rs6k - @echo ' kernel: $@ is ready ($<)' - -TFTPIMAGE := /tftpboot/zImage - -PHONY += znetboot znetboot.initrd -znetboot: $(images)/zImage.chrp - cp $(images)/zImage.chrp $(TFTPIMAGE).chrp$(END) - @echo ' kernel: $@ is ready ($<)' -znetboot.initrd:$(images)/zImage.initrd.chrp - cp $(images)/zImage.initrd.chrp $(TFTPIMAGE).chrp$(END) - @echo ' kernel: $@ is ready ($<)' - diff --git a/arch/ppc/boot/openfirmware/chrpmain.c b/arch/ppc/boot/openfirmware/chrpmain.c deleted file mode 100644 index 245dbd9fc12..00000000000 --- a/arch/ppc/boot/openfirmware/chrpmain.c +++ /dev/null @@ -1,101 +0,0 @@ -/* - * Copyright (C) Paul Mackerras 1997. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ -#include <linux/string.h> -#include "nonstdio.h" -#include "of1275.h" -#include <asm/processor.h> -#include <asm/page.h> - -/* Passed from the linker */ -extern char __image_begin, __image_end; -extern char __ramdisk_begin, __ramdisk_end; -extern char _start, _end; - -extern unsigned int heap_max; -extern void flush_cache(void *, unsigned long); -extern void gunzip(void *, int, unsigned char *, int *); -extern void make_bi_recs(unsigned long addr, char *name, unsigned int mach, - unsigned int progend); - -char *avail_ram; -char *begin_avail, *end_avail; -char *avail_high; - -#define RAM_START 0x00000000 -#define RAM_END (64<<20) - -#define BOOT_START ((unsigned long)_start) -#define BOOT_END ((unsigned long)(_end + 0xFFF) & ~0xFFF) - -#define RAM_FREE ((unsigned long)(_end+0x1000)&~0xFFF) -#define PROG_START 0x00010000 -#define PROG_SIZE 0x007f0000 /* 8MB */ - -#define SCRATCH_SIZE (128 << 10) - -static char scratch[SCRATCH_SIZE]; /* 128k of scratch space for gunzip */ - -typedef void (*kernel_start_t)(int, int, void *, unsigned int, unsigned int); - -void -boot(int a1, int a2, void *prom) -{ - unsigned sa, len; - void *dst; - unsigned char *im; - unsigned int initrd_size, initrd_start; - - printf("chrpboot starting: loaded at 0x%p\n\r", &_start); - - initrd_size = &__ramdisk_end - &__ramdisk_begin; - if (initrd_size) { - initrd_start = (RAM_END - initrd_size) & ~0xFFF; - a1 = initrd_start; - a2 = initrd_size; - claim(initrd_start, RAM_END - initrd_start, 0); - printf("initial ramdisk moving 0x%x <- 0x%p (%x bytes)\n\r", - initrd_start, &__ramdisk_begin, initrd_size); - memcpy((char *)initrd_start, &__ramdisk_begin, initrd_size); - } else { - initrd_start = 0; - initrd_size = 0; - a2 = 0xdeadbeef; - } - - im = &__image_begin; - len = &__image_end - &__image_begin; - /* claim 4MB starting at PROG_START */ - claim(PROG_START, PROG_SIZE - PROG_START, 0); - dst = (void *) PROG_START; - if (im[0] == 0x1f && im[1] == 0x8b) { - avail_ram = scratch; - begin_avail = avail_high = avail_ram; - end_avail = scratch + sizeof(scratch); - printf("gunzipping (0x%p <- 0x%p:0x%p)...", dst, im, im+len); - gunzip(dst, PROG_SIZE - PROG_START, im, &len); - printf("done %u bytes\n\r", len); - printf("%u bytes of heap consumed, max in use %u\n\r", - avail_high - begin_avail, heap_max); - } else { - memmove(dst, im, len); - } - - flush_cache(dst, len); - make_bi_recs(((unsigned long) dst + len), "chrpboot", _MACH_chrp, - (PROG_START + PROG_SIZE)); - - sa = PROG_START; - printf("start address = 0x%x\n\r", sa); - - (*(kernel_start_t)sa)(a1, a2, prom, initrd_start, initrd_size); - - printf("returned?\n\r"); - - pause(); -} diff --git a/arch/ppc/boot/openfirmware/common.c b/arch/ppc/boot/openfirmware/common.c deleted file mode 100644 index 0f46756a903..00000000000 --- a/arch/ppc/boot/openfirmware/common.c +++ /dev/null @@ -1,146 +0,0 @@ -/* - * Copyright (C) Paul Mackerras 1997. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#include "nonstdio.h" -#include "of1275.h" -#include <linux/string.h> -#include <linux/zlib.h> -#include <asm/bootinfo.h> -#include <asm/page.h> - -/* Information from the linker */ - -extern int strcmp(const char *s1, const char *s2); -extern char *avail_ram, *avail_high; -extern char *end_avail; - -unsigned int heap_use, heap_max; - -struct memchunk { - unsigned int size; - struct memchunk *next; -}; - -static struct memchunk *freechunks; - -static void *zalloc(unsigned size) -{ - void *p; - struct memchunk **mpp, *mp; - - size = (size + 7) & -8; - heap_use += size; - if (heap_use > heap_max) - heap_max = heap_use; - for (mpp = &freechunks; (mp = *mpp) != 0; mpp = &mp->next) { - if (mp->size == size) { - *mpp = mp->next; - return mp; - } - } - p = avail_ram; - avail_ram += size; - if (avail_ram > avail_high) - avail_high = avail_ram; - if (avail_ram > end_avail) { - printf("oops... out of memory\n\r"); - pause(); - } - return p; -} - -#define HEAD_CRC 2 -#define EXTRA_FIELD 4 -#define ORIG_NAME 8 -#define COMMENT 0x10 -#define RESERVED 0xe0 - -void gunzip(void *dst, int dstlen, unsigned char *src, int *lenp) -{ - z_stream s; - int r, i, flags; - - /* skip header */ - i = 10; - flags = src[3]; - if (src[2] != Z_DEFLATED || (flags & RESERVED) != 0) { - printf("bad gzipped data\n\r"); - exit(); - } - if ((flags & EXTRA_FIELD) != 0) - i = 12 + src[10] + (src[11] << 8); - if ((flags & ORIG_NAME) != 0) - while (src[i++] != 0) - ; - if ((flags & COMMENT) != 0) - while (src[i++] != 0) - ; - if ((flags & HEAD_CRC) != 0) - i += 2; - if (i >= *lenp) { - printf("gunzip: ran out of data in header\n\r"); - exit(); - } - - /* Initialize ourself. */ - s.workspace = zalloc(zlib_inflate_workspacesize()); - r = zlib_inflateInit2(&s, -MAX_WBITS); - if (r != Z_OK) { - printf("zlib_inflateInit2 returned %d\n\r", r); - exit(); - } - s.next_in = src + i; - s.avail_in = *lenp - i; - s.next_out = dst; - s.avail_out = dstlen; - r = zlib_inflate(&s, Z_FINISH); - if (r != Z_OK && r != Z_STREAM_END) { - printf("inflate returned %d msg: %s\n\r", r, s.msg); - exit(); - } - *lenp = s.next_out - (unsigned char *) dst; - zlib_inflateEnd(&s); -} - -/* Make a bi_rec in OF. We need to be passed a name for BI_BOOTLOADER_ID, - * a machine type for BI_MACHTYPE, and the location where the end of the - * bootloader is (PROG_START + PROG_SIZE) - */ -void make_bi_recs(unsigned long addr, char *name, unsigned int mach, - unsigned long progend) -{ - struct bi_record *rec; - - - /* leave a 1MB gap then align to the next 1MB boundary */ - addr = _ALIGN(addr+ (1<<20) - 1, (1<<20)); - /* oldworld machine seem very unhappy about this. -- Tom */ - if (addr >= progend) - claim(addr, 0x1000, 0); - - rec = (struct bi_record *)addr; - rec->tag = BI_FIRST; - rec->size = sizeof(struct bi_record); - rec = (struct bi_record *)((unsigned long)rec + rec->size); - - rec->tag = BI_BOOTLOADER_ID; - sprintf( (char *)rec->data, name); - rec->size = sizeof(struct bi_record) + strlen(name) + 1; - rec = (struct bi_record *)((unsigned long)rec + rec->size); - - rec->tag = BI_MACHTYPE; - rec->data[0] = mach; - rec->data[1] = 1; - rec->size = sizeof(struct bi_record) + 2 * sizeof(unsigned long); - rec = (struct bi_record *)((unsigned long)rec + rec->size); - - rec->tag = BI_LAST; - rec->size = sizeof(struct bi_record); - rec = (struct bi_record *)((unsigned long)rec + rec->size); -} diff --git a/arch/ppc/boot/openfirmware/dummy.c b/arch/ppc/boot/openfirmware/dummy.c deleted file mode 100644 index 31dbf45bf99..00000000000 --- a/arch/ppc/boot/openfirmware/dummy.c +++ /dev/null @@ -1,4 +0,0 @@ -int main(void) -{ - return 0; -} diff --git a/arch/ppc/boot/openfirmware/misc.S b/arch/ppc/boot/openfirmware/misc.S deleted file mode 100644 index ab9e897cadd..00000000000 --- a/arch/ppc/boot/openfirmware/misc.S +++ /dev/null @@ -1,67 +0,0 @@ -/* - * Copyright (C) Paul Mackerras 1997. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - .text - -/* - * Use the BAT2 & 3 registers to map the 1st 16MB of RAM to - * the address given as the 1st argument. - */ - .globl setup_bats -setup_bats: - mfpvr 5 - rlwinm 5,5,16,16,31 /* r3 = 1 for 601, 4 for 604 */ - cmpwi 0,5,1 - li 0,0 - bne 4f - mtibatl 3,0 /* invalidate BAT first */ - ori 3,3,4 /* set up BAT registers for 601 */ - li 4,0x7f - mtibatu 2,3 - mtibatl 2,4 - oris 3,3,0x80 - oris 4,4,0x80 - mtibatu 3,3 - mtibatl 3,4 - b 5f -4: mtdbatu 3,0 /* invalidate BATs first */ - mtibatu 3,0 - ori 3,3,0xff /* set up BAT registers for 604 */ - li 4,2 - mtdbatl 2,4 - mtdbatu 2,3 - mtibatl 2,4 - mtibatu 2,3 - oris 3,3,0x80 - oris 4,4,0x80 - mtdbatl 3,4 - mtdbatu 3,3 - mtibatl 3,4 - mtibatu 3,3 -5: sync - isync - blr - -/* - * Flush the dcache and invalidate the icache for a range of addresses. - * - * flush_cache(addr, len) - */ - .global flush_cache -flush_cache: - addi 4,4,0x1f /* len = (len + 0x1f) / 0x20 */ - rlwinm. 4,4,27,5,31 - mtctr 4 - beqlr -1: dcbf 0,3 - icbi 0,3 - addi 3,3,0x20 - bdnz 1b - sync - isync - blr diff --git a/arch/ppc/boot/openfirmware/start.c b/arch/ppc/boot/openfirmware/start.c deleted file mode 100644 index 1617a26956b..00000000000 --- a/arch/ppc/boot/openfirmware/start.c +++ /dev/null @@ -1,172 +0,0 @@ -/* - * Copyright (C) Paul Mackerras 1997. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ -#include <stdarg.h> -#include "of1275.h" - -extern int strlen(const char *s); -extern void boot(int a1, int a2, void *prom); - -phandle stdin; -phandle stdout; -phandle stderr; - -void printk(char *fmt, ...); - -void -start(int a1, int a2, void *promptr) -{ - ofinit(promptr); - if (ofstdio(&stdin, &stdout, &stderr)) - exit(); - - boot(a1, a2, promptr); - for (;;) - exit(); -} - -int writestring(void *f, char *ptr, int nb) -{ - int w = 0, i; - char *ret = "\r"; - - for (i = 0; i < nb; ++i) { - if (ptr[i] == '\n') { - if (i > w) { - write(f, ptr + w, i - w); - w = i; - } - write(f, ret, 1); - } - } - if (w < nb) - write(f, ptr + w, nb - w); - return nb; -} - -int -putc(int c, void *f) -{ - char ch = c; - - return writestring(f, &ch, 1) == 1? c: -1; -} - -int -putchar(int c) -{ - return putc(c, stdout); -} - -int -fputs(char *str, void *f) -{ - int n = strlen(str); - - return writestring(f, str, n) == n? 0: -1; -} - -int -readchar(void) -{ - char ch; - - for (;;) { - switch (read(stdin, &ch, 1)) { - case 1: - return ch; - case -1: - printk("read(stdin) returned -1\n"); - return -1; - } - } -} - -static char line[256]; -static char *lineptr; -static int lineleft; - -int -getchar(void) -{ - int c; - - if (lineleft == 0) { - lineptr = line; - for (;;) { - c = readchar(); - if (c == -1 || c == 4) - break; - if (c == '\r' || c == '\n') { - *lineptr++ = '\n'; - putchar('\n'); - break; - } - switch (c) { - case 0177: - case '\b': - if (lineptr > line) { - putchar('\b'); - putchar(' '); - putchar('\b'); - --lineptr; - } - break; - case 'U' & 0x1F: - while (lineptr > line) { - putchar('\b'); - putchar(' '); - putchar('\b'); - --lineptr; - } - break; - default: - if (lineptr >= &line[sizeof(line) - 1]) - putchar('\a'); - else { - putchar(c); - *lineptr++ = c; - } - } - } - lineleft = lineptr - line; - lineptr = line; - } - if (lineleft == 0) - return -1; - --lineleft; - return *lineptr++; -} - -extern int vsprintf(char *buf, const char *fmt, va_list args); -static char sprint_buf[1024]; - -void -printk(char *fmt, ...) -{ - va_list args; - int n; - - va_start(args, fmt); - n = vsprintf(sprint_buf, fmt, args); - va_end(args); - writestring(stdout, sprint_buf, n); -} - -int -printf(char *fmt, ...) -{ - va_list args; - int n; - - va_start(args, fmt); - n = vsprintf(sprint_buf, fmt, args); - va_end(args); - writestring(stdout, sprint_buf, n); - return n; -} diff --git a/arch/ppc/boot/simple/mpc10x_memory.c b/arch/ppc/boot/simple/mpc10x_memory.c index c24290823f7..8da8f576031 100644 --- a/arch/ppc/boot/simple/mpc10x_memory.c +++ b/arch/ppc/boot/simple/mpc10x_memory.c @@ -50,10 +50,10 @@ MPC10X_PCI_OP(read, dword, u32 *, in_le32, 0) * the system. This assumes that the firmware has correctly set up the memory * controller registers. On CONFIG_PPC_PREP, we know we are being called * under a PReP memory map. On all other machines, we assume we are under - * a CHRP memory map. Further, on CONFIG_PPC_MULTIPLATFORM we must rename + * a CHRP memory map. Further, on CONFIG_PPC_PREP we must rename * this function. */ -#ifdef CONFIG_PPC_MULTIPLATFORM +#ifdef CONFIG_PPC_PREP #define get_mem_size mpc10x_get_mem_size #endif unsigned long diff --git a/arch/ppc/boot/simple/relocate.S b/arch/ppc/boot/simple/relocate.S index 7efddc50756..2533113c1cc 100644 --- a/arch/ppc/boot/simple/relocate.S +++ b/arch/ppc/boot/simple/relocate.S @@ -194,7 +194,7 @@ start_ldr: /* * Start at the begining. */ -#ifdef CONFIG_PPC_MULTIPLATFORM +#ifdef CONFIG_PPC_PREP li r9,0xc mtlr r9 /* tell kernel we're prep, by putting 0xdeadc0de at KERNELLOAD, diff --git a/arch/ppc/boot/utils/addnote.c b/arch/ppc/boot/utils/addnote.c deleted file mode 100644 index 6c52b18f2d0..00000000000 --- a/arch/ppc/boot/utils/addnote.c +++ /dev/null @@ -1,175 +0,0 @@ -/* - * Program to hack in a PT_NOTE program header entry in an ELF file. - * This is needed for OF on RS/6000s to load an image correctly. - * Note that OF needs a program header entry for the note, not an - * ELF section. - * - * Copyright 2000 Paul Mackerras. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - * - * Usage: addnote zImage - */ -#include <stdio.h> -#include <stdlib.h> -#include <fcntl.h> -#include <unistd.h> -#include <string.h> - -char arch[] = "PowerPC"; - -#define N_DESCR 6 -unsigned int descr[N_DESCR] = { -#if 1 - /* values for IBM RS/6000 machines */ - 0xffffffff, /* real-mode = true */ - 0x00c00000, /* real-base, i.e. where we expect OF to be */ - 0xffffffff, /* real-size */ - 0xffffffff, /* virt-base */ - 0xffffffff, /* virt-size */ - 0x4000, /* load-base */ -#else - /* values for longtrail CHRP */ - 0, /* real-mode = false */ - 0xffffffff, /* real-base */ - 0xffffffff, /* real-size */ - 0xffffffff, /* virt-base */ - 0xffffffff, /* virt-size */ - 0x00600000, /* load-base */ -#endif -}; - -unsigned char buf[512]; - -#define GET_16BE(off) ((buf[off] << 8) + (buf[(off)+1])) -#define GET_32BE(off) ((GET_16BE(off) << 16) + GET_16BE((off)+2)) - -#define PUT_16BE(off, v) (buf[off] = ((v) >> 8) & 0xff, \ - buf[(off) + 1] = (v) & 0xff) -#define PUT_32BE(off, v) (PUT_16BE((off), (v) >> 16), \ - PUT_16BE((off) + 2, (v))) - -/* Structure of an ELF file */ -#define E_IDENT 0 /* ELF header */ -#define E_PHOFF 28 -#define E_PHENTSIZE 42 -#define E_PHNUM 44 -#define E_HSIZE 52 /* size of ELF header */ - -#define EI_MAGIC 0 /* offsets in E_IDENT area */ -#define EI_CLASS 4 -#define EI_DATA 5 - -#define PH_TYPE 0 /* ELF program header */ -#define PH_OFFSET 4 -#define PH_FILESZ 16 -#define PH_HSIZE 32 /* size of program header */ - -#define PT_NOTE 4 /* Program header type = note */ - -#define ELFCLASS32 1 -#define ELFDATA2MSB 2 - -unsigned char elf_magic[4] = { 0x7f, 'E', 'L', 'F' }; - -int main(int ac, char **av) -{ - int fd, n, i; - int ph, ps, np; - int nnote, ns; - - if (ac != 2) { - fprintf(stderr, "Usage: %s elf-file\n", av[0]); - exit(1); - } - fd = open(av[1], O_RDWR); - if (fd < 0) { - perror(av[1]); - exit(1); - } - - nnote = strlen(arch) + 1 + (N_DESCR + 3) * 4; - - n = read(fd, buf, sizeof(buf)); - if (n < 0) { - perror("read"); - exit(1); - } - - if (n < E_HSIZE || memcmp(&buf[E_IDENT+EI_MAGIC], elf_magic, 4) != 0) - goto notelf; - - if (buf[E_IDENT+EI_CLASS] != ELFCLASS32 - || buf[E_IDENT+EI_DATA] != ELFDATA2MSB) { - fprintf(stderr, "%s is not a big-endian 32-bit ELF image\n", - av[1]); - exit(1); - } - - ph = GET_32BE(E_PHOFF); - ps = GET_16BE(E_PHENTSIZE); - np = GET_16BE(E_PHNUM); - if (ph < E_HSIZE || ps < PH_HSIZE || np < 1) - goto notelf; - if (ph + (np + 1) * ps + nnote > n) - goto nospace; - - for (i = 0; i < np; ++i) { - if (GET_32BE(ph + PH_TYPE) == PT_NOTE) { - fprintf(stderr, "%s already has a note entry\n", - av[1]); - exit(0); - } - ph += ps; - } - - /* XXX check that the area we want to use is all zeroes */ - for (i = 0; i < ps + nnote; ++i) - if (buf[ph + i] != 0) - goto nospace; - - /* fill in the program header entry */ - ns = ph + ps; - PUT_32BE(ph + PH_TYPE, PT_NOTE); - PUT_32BE(ph + PH_OFFSET, ns); - PUT_32BE(ph + PH_FILESZ, nnote); - - /* fill in the note area we point to */ - /* XXX we should probably make this a proper section */ - PUT_32BE(ns, strlen(arch) + 1); - PUT_32BE(ns + 4, N_DESCR * 4); - PUT_32BE(ns + 8, 0x1275); - strcpy(&buf[ns + 12], arch); - ns += 12 + strlen(arch) + 1; - for (i = 0; i < N_DESCR; ++i) - PUT_32BE(ns + i * 4, descr[i]); - - /* Update the number of program headers */ - PUT_16BE(E_PHNUM, np + 1); - - /* write back */ - lseek(fd, (long) 0, SEEK_SET); - i = write(fd, buf, n); - if (i < 0) { - perror("write"); - exit(1); - } - if (i < n) { - fprintf(stderr, "%s: write truncated\n", av[1]); - exit(1); - } - - exit(0); - - notelf: - fprintf(stderr, "%s does not appear to be an ELF file\n", av[0]); - exit(1); - - nospace: - fprintf(stderr, "sorry, I can't find space in %s to put the note\n", - av[0]); - exit(1); -} diff --git a/arch/ppc/boot/utils/hack-coff.c b/arch/ppc/boot/utils/hack-coff.c deleted file mode 100644 index 5e5a6573a1e..00000000000 --- a/arch/ppc/boot/utils/hack-coff.c +++ /dev/null @@ -1,84 +0,0 @@ -/* - * hack-coff.c - hack the header of an xcoff file to fill in - * a few fields needed by the Open Firmware xcoff loader on - * Power Macs but not initialized by objcopy. - * - * Copyright (C) Paul Mackerras 1997. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ -#include <stdio.h> -#include <stdlib.h> -#include <unistd.h> -#include <fcntl.h> -#include <string.h> -#include "rs6000.h" - -#define AOUT_MAGIC 0x010b - -#define get_16be(x) ((((unsigned char *)(x))[0] << 8) \ - + ((unsigned char *)(x))[1]) -#define put_16be(x, v) (((unsigned char *)(x))[0] = (v) >> 8, \ - ((unsigned char *)(x))[1] = (v) & 0xff) -#define get_32be(x) ((((unsigned char *)(x))[0] << 24) \ - + (((unsigned char *)(x))[1] << 16) \ - + (((unsigned char *)(x))[2] << 8) \ - + ((unsigned char *)(x))[3]) - -int -main(int ac, char **av) -{ - int fd; - int i, nsect; - int aoutsz; - struct external_filehdr fhdr; - AOUTHDR aout; - struct external_scnhdr shdr; - - if (ac != 2) { - fprintf(stderr, "Usage: hack-coff coff-file\n"); - exit(1); - } - if ((fd = open(av[1], 2)) == -1) { - perror(av[2]); - exit(1); - } - if (read(fd, &fhdr, sizeof(fhdr)) != sizeof(fhdr)) - goto readerr; - i = get_16be(fhdr.f_magic); - if (i != U802TOCMAGIC && i != U802WRMAGIC && i != U802ROMAGIC) { - fprintf(stderr, "%s: not an xcoff file\n", av[1]); - exit(1); - } - aoutsz = get_16be(fhdr.f_opthdr); - if (read(fd, &aout, aoutsz) != aoutsz) - goto readerr; - nsect = get_16be(fhdr.f_nscns); - for (i = 0; i < nsect; ++i) { - if (read(fd, &shdr, sizeof(shdr)) != sizeof(shdr)) - goto readerr; - if (strcmp(shdr.s_name, ".text") == 0) { - put_16be(aout.o_snentry, i+1); - put_16be(aout.o_sntext, i+1); - } else if (strcmp(shdr.s_name, ".data") == 0) { - put_16be(aout.o_sndata, i+1); - } else if (strcmp(shdr.s_name, ".bss") == 0) { - put_16be(aout.o_snbss, i+1); - } - } - put_16be(aout.magic, AOUT_MAGIC); - if (lseek(fd, (long) sizeof(struct external_filehdr), 0) == -1 - || write(fd, &aout, aoutsz) != aoutsz) { - fprintf(stderr, "%s: write error\n", av[1]); - exit(1); - } - close(fd); - exit(0); - -readerr: - fprintf(stderr, "%s: read error or file too short\n", av[1]); - exit(1); -} diff --git a/arch/ppc/boot/utils/mknote.c b/arch/ppc/boot/utils/mknote.c deleted file mode 100644 index b9fbb2cbfc8..00000000000 --- a/arch/ppc/boot/utils/mknote.c +++ /dev/null @@ -1,44 +0,0 @@ -/* - * Copyright (C) Cort Dougan 1999. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - * - * Generate a note section as per the CHRP specification. - * - */ - -#include <stdio.h> -#include <string.h> - -#define PL(x) printf("%c%c%c%c", ((x)>>24)&0xff, ((x)>>16)&0xff, ((x)>>8)&0xff, (x)&0xff ); - -int main(void) -{ -/* header */ - /* namesz */ - PL(strlen("PowerPC")+1); - /* descrsz */ - PL(6*4); - /* type */ - PL(0x1275); - /* name */ - printf("PowerPC"); printf("%c", 0); - -/* descriptor */ - /* real-mode */ - PL(0xffffffff); - /* real-base */ - PL(0x00c00000); - /* real-size */ - PL(0xffffffff); - /* virt-base */ - PL(0xffffffff); - /* virt-size */ - PL(0xffffffff); - /* load-base */ - PL(0x4000); - return 0; -} diff --git a/arch/ppc/configs/ibmchrp_defconfig b/arch/ppc/configs/ibmchrp_defconfig deleted file mode 100644 index 27f3e69c1f9..00000000000 --- a/arch/ppc/configs/ibmchrp_defconfig +++ /dev/null @@ -1,875 +0,0 @@ -# -# Automatically generated make config: don't edit -# -CONFIG_MMU=y -CONFIG_RWSEM_XCHGADD_ALGORITHM=y -CONFIG_HAVE_DEC_LOCK=y -CONFIG_PPC=y -CONFIG_PPC32=y -CONFIG_GENERIC_NVRAM=y - -# -# Code maturity level options -# -CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y -# CONFIG_STANDALONE is not set -CONFIG_BROKEN_ON_SMP=y - -# -# General setup -# -CONFIG_SWAP=y -CONFIG_SYSVIPC=y -CONFIG_POSIX_MQUEUE=y -# CONFIG_BSD_PROCESS_ACCT is not set -CONFIG_SYSCTL=y -# CONFIG_AUDIT is not set -CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_HOTPLUG is not set -CONFIG_IKCONFIG=y -CONFIG_IKCONFIG_PROC=y -# CONFIG_EMBEDDED is not set -CONFIG_KALLSYMS=y -CONFIG_FUTEX=y -CONFIG_EPOLL=y -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set - -# -# Loadable module support -# -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -CONFIG_MODULE_FORCE_UNLOAD=y -CONFIG_OBSOLETE_MODPARM=y -# CONFIG_MODVERSIONS is not set -CONFIG_KMOD=y - -# -# Processor -# -CONFIG_6xx=y -# CONFIG_40x is not set -# CONFIG_44x is not set -# CONFIG_POWER3 is not set -# CONFIG_POWER4 is not set -# CONFIG_8xx is not set -# CONFIG_ALTIVEC is not set -# CONFIG_TAU is not set -# CONFIG_CPU_FREQ is not set -# CONFIG_PPC601_SYNC_FIX is not set -CONFIG_PPC_STD_MMU=y - -# -# Platform options -# -CONFIG_PPC_MULTIPLATFORM=y -# CONFIG_APUS is not set -# CONFIG_WILLOW is not set -# CONFIG_PCORE is not set -# CONFIG_POWERPMC250 is not set -# CONFIG_EV64260 is not set -# CONFIG_SPRUCE is not set -# CONFIG_LOPEC is not set -# CONFIG_MCPN765 is not set -# CONFIG_MVME5100 is not set -# CONFIG_PPLUS is not set -# CONFIG_PRPMC750 is not set -# CONFIG_PRPMC800 is not set -# CONFIG_SANDPOINT is not set -# CONFIG_ADIR is not set -# CONFIG_K2 is not set -# CONFIG_PAL4 is not set -# CONFIG_GEMINI is not set -# CONFIG_EST8260 is not set -# CONFIG_SBS8260 is not set -# CONFIG_RPX6 is not set -# CONFIG_TQM8260 is not set -CONFIG_PPC_CHRP=y -CONFIG_PPC_PMAC=y -CONFIG_PPC_PREP=y -CONFIG_PPC_OF=y -CONFIG_PPCBUG_NVRAM=y -# CONFIG_SMP is not set -# CONFIG_PREEMPT is not set -CONFIG_HIGHMEM=y -CONFIG_KERNEL_ELF=y -CONFIG_BINFMT_ELF=y -CONFIG_BINFMT_MISC=y -CONFIG_PROC_DEVICETREE=y -CONFIG_PPC_RTAS=y -# CONFIG_PREP_RESIDUAL is not set -# CONFIG_CMDLINE_BOOL is not set - -# -# Bus options -# -CONFIG_ISA=y -CONFIG_GENERIC_ISA_DMA=y -CONFIG_PCI=y -CONFIG_PCI_DOMAINS=y -CONFIG_PCI_LEGACY_PROC=y -CONFIG_PCI_NAMES=y - -# -# Advanced setup -# -# CONFIG_ADVANCED_OPTIONS is not set - -# -# Default settings for advanced configuration options are used -# -CONFIG_HIGHMEM_START=0xfe000000 -CONFIG_LOWMEM_SIZE=0x30000000 -CONFIG_KERNEL_START=0xc0000000 -CONFIG_TASK_SIZE=0x80000000 -CONFIG_BOOT_LOAD=0x00800000 - -# -# Device Drivers -# - -# -# Generic Driver Options -# - -# -# Memory Technology Devices (MTD) -# -# CONFIG_MTD is not set - -# -# Parallel port support -# -# CONFIG_PARPORT is not set - -# -# Plug and Play support -# -# CONFIG_PNP is not set - -# -# Block devices -# -CONFIG_BLK_DEV_FD=y -# CONFIG_BLK_DEV_XD is not set -# CONFIG_BLK_CPQ_DA is not set -# CONFIG_BLK_CPQ_CISS_DA is not set -# CONFIG_BLK_DEV_DAC960 is not set -# CONFIG_BLK_DEV_UMEM is not set -CONFIG_BLK_DEV_LOOP=y -# CONFIG_BLK_DEV_CRYPTOLOOP is not set -# CONFIG_BLK_DEV_NBD is not set -# CONFIG_BLK_DEV_CARMEL is not set -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=4096 -CONFIG_BLK_DEV_INITRD=y -CONFIG_LBD=y - -# -# ATA/ATAPI/MFM/RLL support -# -# CONFIG_IDE is not set - -# -# SCSI device support -# -CONFIG_SCSI=y -CONFIG_SCSI_PROC_FS=y - -# -# SCSI support type (disk, tape, CD-ROM) -# -CONFIG_BLK_DEV_SD=y -CONFIG_CHR_DEV_ST=y -# CONFIG_CHR_DEV_OSST is not set -CONFIG_BLK_DEV_SR=y -CONFIG_BLK_DEV_SR_VENDOR=y -CONFIG_CHR_DEV_SG=y - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# -# CONFIG_SCSI_MULTI_LUN is not set -# CONFIG_SCSI_REPORT_LUNS is not set -CONFIG_SCSI_CONSTANTS=y -# CONFIG_SCSI_LOGGING is not set - -# -# SCSI Transport Attributes -# -CONFIG_SCSI_SPI_ATTRS=y -# CONFIG_SCSI_FC_ATTRS is not set - -# -# SCSI low-level drivers -# -# CONFIG_BLK_DEV_3W_XXXX_RAID is not set -# CONFIG_SCSI_7000FASST is not set -# CONFIG_SCSI_ACARD is not set -# CONFIG_SCSI_AHA152X is not set -# CONFIG_SCSI_AHA1542 is not set -# CONFIG_SCSI_AACRAID is not set -# CONFIG_SCSI_AIC7XXX is not set -# CONFIG_SCSI_AIC7XXX_OLD is not set -# CONFIG_SCSI_AIC79XX is not set -# CONFIG_SCSI_ADVANSYS is not set -# CONFIG_SCSI_IN2000 is not set -# CONFIG_SCSI_MEGARAID is not set -# CONFIG_SCSI_SATA is not set -# CONFIG_SCSI_BUSLOGIC is not set -# CONFIG_SCSI_CPQFCTS is not set -# CONFIG_SCSI_DMX3191D is not set -# CONFIG_SCSI_DTC3280 is not set -# CONFIG_SCSI_EATA is not set -# CONFIG_SCSI_EATA_PIO is not set -# CONFIG_SCSI_FUTURE_DOMAIN is not set -# CONFIG_SCSI_GDTH is not set -# CONFIG_SCSI_GENERIC_NCR5380 is not set -# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set -# CONFIG_SCSI_IPS is not set -# CONFIG_SCSI_INIA100 is not set -# CONFIG_SCSI_NCR53C406A is not set -CONFIG_SCSI_SYM53C8XX_2=y -CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=0 -CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16 -CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64 -# CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set -# CONFIG_SCSI_IPR is not set -# CONFIG_SCSI_PAS16 is not set -# CONFIG_SCSI_PSI240I is not set -# CONFIG_SCSI_QLOGIC_FAS is not set -# CONFIG_SCSI_QLOGIC_ISP is not set -# CONFIG_SCSI_QLOGIC_FC is not set -# CONFIG_SCSI_QLOGIC_1280 is not set -CONFIG_SCSI_QLA2XXX=y -# CONFIG_SCSI_QLA21XX is not set -# CONFIG_SCSI_QLA22XX is not set -# CONFIG_SCSI_QLA2300 is not set -# CONFIG_SCSI_QLA2322 is not set -# CONFIG_SCSI_QLA6312 is not set -# CONFIG_SCSI_QLA6322 is not set -# CONFIG_SCSI_SYM53C416 is not set -# CONFIG_SCSI_DC395x is not set -# CONFIG_SCSI_DC390T is not set -# CONFIG_SCSI_T128 is not set -# CONFIG_SCSI_U14_34F is not set -# CONFIG_SCSI_NSP32 is not set -# CONFIG_SCSI_DEBUG is not set -# CONFIG_SCSI_MESH is not set -# CONFIG_SCSI_MAC53C94 is not set - -# -# Old CD-ROM drivers (not SCSI, not IDE) -# -# CONFIG_CD_NO_IDESCSI is not set - -# -# Multi-device support (RAID and LVM) -# -# CONFIG_MD is not set - -# -# Fusion MPT device support -# -# CONFIG_FUSION is not set - -# -# IEEE 1394 (FireWire) support -# -# CONFIG_IEEE1394 is not set - -# -# I2O device support -# -# CONFIG_I2O is not set - -# -# Macintosh device drivers -# -# CONFIG_ADB is not set -# CONFIG_ADB_CUDA is not set -# CONFIG_ADB_PMU is not set -# CONFIG_MAC_FLOPPY is not set -# CONFIG_MAC_SERIAL is not set - -# -# Networking support -# -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set -# CONFIG_NETLINK_DEV is not set -CONFIG_UNIX=y -# CONFIG_NET_KEY is not set -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -# CONFIG_IP_ADVANCED_ROUTER is not set -# CONFIG_IP_PNP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_IP_MROUTE is not set -# CONFIG_ARPD is not set -CONFIG_SYN_COOKIES=y -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set - -# -# IP: Virtual Server Configuration -# -# CONFIG_IP_VS is not set -# CONFIG_IPV6 is not set -CONFIG_NETFILTER=y -# CONFIG_NETFILTER_DEBUG is not set - -# -# IP: Netfilter Configuration -# -CONFIG_IP_NF_CONNTRACK=m -CONFIG_IP_NF_FTP=m -CONFIG_IP_NF_IRC=m -CONFIG_IP_NF_TFTP=m -CONFIG_IP_NF_AMANDA=m -# CONFIG_IP_NF_QUEUE is not set -CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_LIMIT=m -CONFIG_IP_NF_MATCH_IPRANGE=m -CONFIG_IP_NF_MATCH_MAC=m -# CONFIG_IP_NF_MATCH_PKTTYPE is not set -CONFIG_IP_NF_MATCH_MARK=m -CONFIG_IP_NF_MATCH_MULTIPORT=m -CONFIG_IP_NF_MATCH_TOS=m -CONFIG_IP_NF_MATCH_RECENT=m -CONFIG_IP_NF_MATCH_ECN=m -CONFIG_IP_NF_MATCH_DSCP=m -CONFIG_IP_NF_MATCH_AH_ESP=m -CONFIG_IP_NF_MATCH_LENGTH=m -CONFIG_IP_NF_MATCH_TTL=m -CONFIG_IP_NF_MATCH_TCPMSS=m -CONFIG_IP_NF_MATCH_HELPER=m -CONFIG_IP_NF_MATCH_STATE=m -CONFIG_IP_NF_MATCH_CONNTRACK=m -CONFIG_IP_NF_MATCH_OWNER=m -CONFIG_IP_NF_FILTER=m -CONFIG_IP_NF_TARGET_REJECT=m -CONFIG_IP_NF_NAT=m -CONFIG_IP_NF_NAT_NEEDED=y -CONFIG_IP_NF_TARGET_MASQUERADE=m -CONFIG_IP_NF_TARGET_REDIRECT=m -CONFIG_IP_NF_TARGET_NETMAP=m -CONFIG_IP_NF_TARGET_SAME=m -CONFIG_IP_NF_NAT_SNMP_BASIC=m -CONFIG_IP_NF_NAT_IRC=m -CONFIG_IP_NF_NAT_FTP=m -CONFIG_IP_NF_NAT_TFTP=m -CONFIG_IP_NF_NAT_AMANDA=m -# CONFIG_IP_NF_MANGLE is not set -# CONFIG_IP_NF_TARGET_LOG is not set -CONFIG_IP_NF_TARGET_ULOG=m -CONFIG_IP_NF_TARGET_TCPMSS=m -CONFIG_IP_NF_ARPTABLES=m -CONFIG_IP_NF_ARPFILTER=m -CONFIG_IP_NF_ARP_MANGLE=m -CONFIG_IP_NF_COMPAT_IPCHAINS=m -# CONFIG_IP_NF_COMPAT_IPFWADM is not set -CONFIG_IP_NF_TARGET_NOTRACK=m -CONFIG_IP_NF_RAW=m - -# -# SCTP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_SCTP is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set -# CONFIG_NET_HW_FLOWCONTROL is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set -# CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set -CONFIG_NETDEVICES=y -# CONFIG_DUMMY is not set -# CONFIG_BONDING is not set -# CONFIG_EQUALIZER is not set -# CONFIG_TUN is not set - -# -# ARCnet devices -# -# CONFIG_ARCNET is not set - -# -# Ethernet (10 or 100Mbit) -# -CONFIG_NET_ETHERNET=y -CONFIG_MII=y -# CONFIG_MACE is not set -# CONFIG_BMAC is not set -# CONFIG_OAKNET is not set -# CONFIG_HAPPYMEAL is not set -# CONFIG_SUNGEM is not set -# CONFIG_NET_VENDOR_3COM is not set -# CONFIG_LANCE is not set -# CONFIG_NET_VENDOR_SMC is not set -# CONFIG_NET_VENDOR_RACAL is not set - -# -# Tulip family network device support -# -# CONFIG_NET_TULIP is not set -# CONFIG_AT1700 is not set -# CONFIG_DEPCA is not set -# CONFIG_HP100 is not set -# CONFIG_NET_ISA is not set -CONFIG_NET_PCI=y -CONFIG_PCNET32=y -# CONFIG_AMD8111_ETH is not set -# CONFIG_ADAPTEC_STARFIRE is not set -# CONFIG_AC3200 is not set -# CONFIG_APRICOT is not set -# CONFIG_B44 is not set -# CONFIG_FORCEDETH is not set -# CONFIG_CS89x0 is not set -# CONFIG_DGRS is not set -# CONFIG_EEPRO100 is not set -# CONFIG_E100 is not set -# CONFIG_FEALNX is not set -# CONFIG_NATSEMI is not set -# CONFIG_NE2K_PCI is not set -# CONFIG_8139CP is not set -# CONFIG_8139TOO is not set -# CONFIG_SIS900 is not set -# CONFIG_EPIC100 is not set -# CONFIG_SUNDANCE is not set -# CONFIG_TLAN is not set -# CONFIG_VIA_RHINE is not set -# CONFIG_NET_POCKET is not set - -# -# Ethernet (1000 Mbit) -# -# CONFIG_ACENIC is not set -# CONFIG_DL2K is not set -# CONFIG_E1000 is not set -# CONFIG_NS83820 is not set -# CONFIG_HAMACHI is not set -# CONFIG_YELLOWFIN is not set -# CONFIG_R8169 is not set -# CONFIG_SK98LIN is not set -# CONFIG_TIGON3 is not set - -# -# Ethernet (10000 Mbit) -# -# CONFIG_IXGB is not set -# CONFIG_S2IO is not set - -# -# Token Ring devices -# -# CONFIG_TR is not set - -# -# Wireless LAN (non-hamradio) -# -# CONFIG_NET_RADIO is not set - -# -# Wan interfaces -# -# CONFIG_WAN is not set -# CONFIG_FDDI is not set -# CONFIG_HIPPI is not set -# CONFIG_PPP is not set -# CONFIG_SLIP is not set -# CONFIG_NET_FC is not set -# CONFIG_RCPCI is not set -# CONFIG_SHAPER is not set -# CONFIG_NETCONSOLE is not set - -# -# ISDN subsystem -# -# CONFIG_ISDN is not set - -# -# Telephony Support -# -# CONFIG_PHONE is not set - -# -# Input device support -# -CONFIG_INPUT=y - -# -# Userland interfaces -# -CONFIG_INPUT_MOUSEDEV=y -CONFIG_INPUT_MOUSEDEV_PSAUX=y -CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 -# CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set -CONFIG_INPUT_EVDEV=y -# CONFIG_INPUT_EVBUG is not set - -# -# Input I/O drivers -# -# CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y -CONFIG_SERIO=y -CONFIG_SERIO_I8042=y -CONFIG_SERIO_SERPORT=y -# CONFIG_SERIO_CT82C710 is not set -# CONFIG_SERIO_PCIPS2 is not set - -# -# Input Device Drivers -# -CONFIG_INPUT_KEYBOARD=y -CONFIG_KEYBOARD_ATKBD=y -# CONFIG_KEYBOARD_SUNKBD is not set -# CONFIG_KEYBOARD_LKKBD is not set -# CONFIG_KEYBOARD_XTKBD is not set -# CONFIG_KEYBOARD_NEWTON is not set -CONFIG_INPUT_MOUSE=y -CONFIG_MOUSE_PS2=y -# CONFIG_MOUSE_SERIAL is not set -# CONFIG_MOUSE_INPORT is not set -# CONFIG_MOUSE_LOGIBM is not set -# CONFIG_MOUSE_PC110PAD is not set -# CONFIG_MOUSE_VSXXXAA is not set -# CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TOUCHSCREEN is not set -CONFIG_INPUT_MISC=y -CONFIG_INPUT_UINPUT=y - -# -# Character devices -# -CONFIG_VT=y -CONFIG_VT_CONSOLE=y -CONFIG_HW_CONSOLE=y -# CONFIG_SERIAL_NONSTANDARD is not set - -# -# Serial drivers -# -CONFIG_SERIAL_8250=y -# CONFIG_SERIAL_8250_CONSOLE is not set -CONFIG_SERIAL_8250_NR_UARTS=4 -# CONFIG_SERIAL_8250_EXTENDED is not set - -# -# Non-8250 serial port support -# -CONFIG_SERIAL_CORE=y -# CONFIG_SERIAL_PMACZILOG is not set -CONFIG_UNIX98_PTYS=y -CONFIG_LEGACY_PTYS=y -CONFIG_LEGACY_PTY_COUNT=256 -# CONFIG_QIC02_TAPE is not set - -# -# IPMI -# -# CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -# CONFIG_WATCHDOG is not set -CONFIG_NVRAM=y -CONFIG_GEN_RTC=y -# CONFIG_GEN_RTC_X is not set -# CONFIG_DTLK is not set -# CONFIG_R3964 is not set -# CONFIG_APPLICOM is not set - -# -# Ftape, the floppy tape device driver -# -# CONFIG_FTAPE is not set -# CONFIG_AGP is not set -# CONFIG_DRM is not set -# CONFIG_RAW_DRIVER is not set - -# -# I2C support -# -# CONFIG_I2C is not set - -# -# Misc devices -# - -# -# Multimedia devices -# -# CONFIG_VIDEO_DEV is not set - -# -# Digital Video Broadcasting Devices -# -# CONFIG_DVB is not set - -# -# Graphics support -# -CONFIG_FB=y -# CONFIG_FB_PM2 is not set -# CONFIG_FB_CYBER2000 is not set -CONFIG_FB_OF=y -# CONFIG_FB_CONTROL is not set -# CONFIG_FB_PLATINUM is not set -# CONFIG_FB_VALKYRIE is not set -# CONFIG_FB_CT65550 is not set -# CONFIG_FB_IMSTT is not set -# CONFIG_FB_S3TRIO is not set -# CONFIG_FB_VGA16 is not set -# CONFIG_FB_RIVA is not set -CONFIG_FB_MATROX=y -CONFIG_FB_MATROX_MILLENIUM=y -CONFIG_FB_MATROX_MYSTIQUE=y -# CONFIG_FB_MATROX_G450 is not set -CONFIG_FB_MATROX_G100A=y -CONFIG_FB_MATROX_G100=y -# CONFIG_FB_MATROX_MULTIHEAD is not set -# CONFIG_FB_RADEON_OLD is not set -# CONFIG_FB_RADEON is not set -# CONFIG_FB_ATY128 is not set -# CONFIG_FB_ATY is not set -# CONFIG_FB_SIS is not set -# CONFIG_FB_NEOMAGIC is not set -# CONFIG_FB_KYRO is not set -CONFIG_FB_3DFX=y -# CONFIG_FB_VOODOO1 is not set -# CONFIG_FB_TRIDENT is not set -# CONFIG_FB_VIRTUAL is not set - -# -# Console display driver support -# -CONFIG_VGA_CONSOLE=y -# CONFIG_MDA_CONSOLE is not set -CONFIG_DUMMY_CONSOLE=y -CONFIG_FRAMEBUFFER_CONSOLE=y -CONFIG_PCI_CONSOLE=y -# CONFIG_FONTS is not set -CONFIG_FONT_8x8=y -CONFIG_FONT_8x16=y - -# -# Logo configuration -# -CONFIG_LOGO=y -CONFIG_LOGO_LINUX_MONO=y -CONFIG_LOGO_LINUX_VGA16=y -CONFIG_LOGO_LINUX_CLUT224=y - -# -# Sound -# -# CONFIG_SOUND is not set - -# -# USB support -# -# CONFIG_USB is not set - -# -# USB Gadget Support -# -# CONFIG_USB_GADGET is not set - -# -# File systems -# -CONFIG_EXT2_FS=y -# CONFIG_EXT2_FS_XATTR is not set -# CONFIG_EXT3_FS is not set -# CONFIG_JBD is not set -# CONFIG_REISERFS_FS is not set -# CONFIG_JFS_FS is not set -# CONFIG_XFS_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set -# CONFIG_QUOTA is not set -# CONFIG_AUTOFS_FS is not set -# CONFIG_AUTOFS4_FS is not set - -# -# CD-ROM/DVD Filesystems -# -CONFIG_ISO9660_FS=y -# CONFIG_JOLIET is not set -# CONFIG_ZISOFS is not set -# CONFIG_UDF_FS is not set - -# -# DOS/FAT/NT Filesystems -# -CONFIG_FAT_FS=m -CONFIG_MSDOS_FS=m -CONFIG_VFAT_FS=m -# CONFIG_NTFS_FS is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -CONFIG_PROC_KCORE=y -CONFIG_SYSFS=y -CONFIG_DEVFS_FS=y -# CONFIG_DEVFS_MOUNT is not set -# CONFIG_DEVFS_DEBUG is not set -# CONFIG_DEVPTS_FS_XATTR is not set -CONFIG_TMPFS=y -# CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y - -# -# Miscellaneous filesystems -# -# CONFIG_ADFS_FS is not set -# CONFIG_AFFS_FS is not set -# CONFIG_HFS_FS is not set -# CONFIG_HFSPLUS_FS is not set -# CONFIG_BEFS_FS is not set -# CONFIG_BFS_FS is not set -# CONFIG_EFS_FS is not set -# CONFIG_CRAMFS is not set -# CONFIG_VXFS_FS is not set -# CONFIG_HPFS_FS is not set -# CONFIG_QNX4FS_FS is not set -# CONFIG_SYSV_FS is not set -# CONFIG_UFS_FS is not set - -# -# Network File Systems -# -# CONFIG_NFS_FS is not set -# CONFIG_NFSD is not set -# CONFIG_EXPORTFS is not set -# CONFIG_SMB_FS is not set -# CONFIG_CIFS is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_AFS_FS is not set - -# -# Partition Types -# -CONFIG_PARTITION_ADVANCED=y -# CONFIG_ACORN_PARTITION is not set -# CONFIG_OSF_PARTITION is not set -# CONFIG_AMIGA_PARTITION is not set -# CONFIG_ATARI_PARTITION is not set -CONFIG_MAC_PARTITION=y -CONFIG_MSDOS_PARTITION=y -# CONFIG_BSD_DISKLABEL is not set -# CONFIG_MINIX_SUBPARTITION is not set -# CONFIG_SOLARIS_X86_PARTITION is not set -# CONFIG_UNIXWARE_DISKLABEL is not set -# CONFIG_LDM_PARTITION is not set -# CONFIG_NEC98_PARTITION is not set -# CONFIG_SGI_PARTITION is not set -# CONFIG_ULTRIX_PARTITION is not set -# CONFIG_SUN_PARTITION is not set -# CONFIG_EFI_PARTITION is not set - -# -# Native Language Support -# -CONFIG_NLS=y -CONFIG_NLS_DEFAULT="iso8859-1" -# CONFIG_NLS_CODEPAGE_437 is not set -# CONFIG_NLS_CODEPAGE_737 is not set -# CONFIG_NLS_CODEPAGE_775 is not set -# CONFIG_NLS_CODEPAGE_850 is not set -# CONFIG_NLS_CODEPAGE_852 is not set -# CONFIG_NLS_CODEPAGE_855 is not set -# CONFIG_NLS_CODEPAGE_857 is not set -# CONFIG_NLS_CODEPAGE_860 is not set -# CONFIG_NLS_CODEPAGE_861 is not set -# CONFIG_NLS_CODEPAGE_862 is not set -# CONFIG_NLS_CODEPAGE_863 is not set -# CONFIG_NLS_CODEPAGE_864 is not set -# CONFIG_NLS_CODEPAGE_865 is not set -# CONFIG_NLS_CODEPAGE_866 is not set -# CONFIG_NLS_CODEPAGE_869 is not set -# CONFIG_NLS_CODEPAGE_936 is not set -# CONFIG_NLS_CODEPAGE_950 is not set -# CONFIG_NLS_CODEPAGE_932 is not set -# CONFIG_NLS_CODEPAGE_949 is not set -# CONFIG_NLS_CODEPAGE_874 is not set -# CONFIG_NLS_ISO8859_8 is not set -# CONFIG_NLS_CODEPAGE_1250 is not set -# CONFIG_NLS_CODEPAGE_1251 is not set -CONFIG_NLS_ISO8859_1=m -# CONFIG_NLS_ISO8859_2 is not set -# CONFIG_NLS_ISO8859_3 is not set -# CONFIG_NLS_ISO8859_4 is not set -# CONFIG_NLS_ISO8859_5 is not set -# CONFIG_NLS_ISO8859_6 is not set -# CONFIG_NLS_ISO8859_7 is not set -# CONFIG_NLS_ISO8859_9 is not set -# CONFIG_NLS_ISO8859_13 is not set -# CONFIG_NLS_ISO8859_14 is not set -# CONFIG_NLS_ISO8859_15 is not set -# CONFIG_NLS_KOI8_R is not set -# CONFIG_NLS_KOI8_U is not set -# CONFIG_NLS_UTF8 is not set - -# -# Library routines -# -CONFIG_CRC32=y -# CONFIG_LIBCRC32C is not set - -# -# Kernel hacking -# -# CONFIG_DEBUG_KERNEL is not set -# CONFIG_BOOTX_TEXT is not set - -# -# Security options -# -# CONFIG_SECURITY is not set - -# -# Cryptographic options -# -# CONFIG_CRYPTO is not set diff --git a/arch/ppc/configs/pmac_defconfig b/arch/ppc/configs/pmac_defconfig deleted file mode 100644 index a2db8b541c9..00000000000 --- a/arch/ppc/configs/pmac_defconfig +++ /dev/null @@ -1,1591 +0,0 @@ -# -# Automatically generated make config: don't edit -# Linux kernel version: 2.6.13-rc3 -# Wed Jul 13 14:13:13 2005 -# -CONFIG_MMU=y -CONFIG_GENERIC_HARDIRQS=y -CONFIG_RWSEM_XCHGADD_ALGORITHM=y -CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_HAVE_DEC_LOCK=y -CONFIG_PPC=y -CONFIG_PPC32=y -CONFIG_GENERIC_NVRAM=y -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y - -# -# Code maturity level options -# -CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y -CONFIG_BROKEN_ON_SMP=y -CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# -CONFIG_LOCALVERSION="" -CONFIG_SWAP=y -CONFIG_SYSVIPC=y -CONFIG_POSIX_MQUEUE=y -# CONFIG_BSD_PROCESS_ACCT is not set -CONFIG_SYSCTL=y -# CONFIG_AUDIT is not set -CONFIG_HOTPLUG=y -CONFIG_KOBJECT_UEVENT=y -CONFIG_IKCONFIG=y -CONFIG_IKCONFIG_PROC=y -# CONFIG_EMBEDDED is not set -CONFIG_KALLSYMS=y -# CONFIG_KALLSYMS_ALL is not set -# CONFIG_KALLSYMS_EXTRA_PASS is not set -CONFIG_PRINTK=y -CONFIG_BUG=y -CONFIG_BASE_FULL=y -CONFIG_FUTEX=y -CONFIG_EPOLL=y -CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 -# CONFIG_TINY_SHMEM is not set -CONFIG_BASE_SMALL=0 - -# -# Loadable module support -# -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_MODULE_FORCE_UNLOAD is not set -CONFIG_OBSOLETE_MODPARM=y -CONFIG_MODVERSIONS=y -CONFIG_MODULE_SRCVERSION_ALL=y -CONFIG_KMOD=y - -# -# Processor -# -CONFIG_6xx=y -# CONFIG_40x is not set -# CONFIG_44x is not set -# CONFIG_POWER3 is not set -# CONFIG_POWER4 is not set -# CONFIG_8xx is not set -# CONFIG_E200 is not set -# CONFIG_E500 is not set -CONFIG_PPC_FPU=y -CONFIG_ALTIVEC=y -CONFIG_TAU=y -# CONFIG_TAU_INT is not set -# CONFIG_TAU_AVERAGE is not set -# CONFIG_KEXEC is not set -CONFIG_CPU_FREQ=y -CONFIG_CPU_FREQ_TABLE=y -# CONFIG_CPU_FREQ_DEBUG is not set -CONFIG_CPU_FREQ_STAT=m -CONFIG_CPU_FREQ_STAT_DETAILS=y -CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y -# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set -CONFIG_CPU_FREQ_GOV_PERFORMANCE=y -CONFIG_CPU_FREQ_GOV_POWERSAVE=m -CONFIG_CPU_FREQ_GOV_USERSPACE=m -CONFIG_CPU_FREQ_GOV_ONDEMAND=m -CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m -CONFIG_CPU_FREQ_PMAC=y -CONFIG_PPC601_SYNC_FIX=y -CONFIG_PM=y -CONFIG_PPC_STD_MMU=y - -# -# Platform options -# -CONFIG_PPC_MULTIPLATFORM=y -# CONFIG_APUS is not set -# CONFIG_KATANA is not set -# CONFIG_WILLOW is not set -# CONFIG_CPCI690 is not set -# CONFIG_PCORE is not set -# CONFIG_POWERPMC250 is not set -# CONFIG_CHESTNUT is not set -# CONFIG_SPRUCE is not set -# CONFIG_HDPU is not set -# CONFIG_EV64260 is not set -# CONFIG_LOPEC is not set -# CONFIG_MCPN765 is not set -# CONFIG_MVME5100 is not set -# CONFIG_PPLUS is not set -# CONFIG_PRPMC750 is not set -# CONFIG_PRPMC800 is not set -# CONFIG_SANDPOINT is not set -# CONFIG_RADSTONE_PPC7D is not set -# CONFIG_ADIR is not set -# CONFIG_K2 is not set -# CONFIG_PAL4 is not set -# CONFIG_GEMINI is not set -# CONFIG_EST8260 is not set -# CONFIG_SBC82xx is not set -# CONFIG_SBS8260 is not set -# CONFIG_RPX8260 is not set -# CONFIG_TQM8260 is not set -# CONFIG_ADS8272 is not set -# CONFIG_PQ2FADS is not set -# CONFIG_LITE5200 is not set -# CONFIG_MPC834x_SYS is not set -CONFIG_PPC_CHRP=y -CONFIG_PPC_PMAC=y -CONFIG_PPC_PREP=y -CONFIG_PPC_OF=y -CONFIG_PPCBUG_NVRAM=y -# CONFIG_SMP is not set -# CONFIG_HIGHMEM is not set -# CONFIG_HZ_100 is not set -CONFIG_HZ_250=y -# CONFIG_HZ_1000 is not set -CONFIG_HZ=250 -CONFIG_PREEMPT_NONE=y -# CONFIG_PREEMPT_VOLUNTARY is not set -# CONFIG_PREEMPT is not set -CONFIG_SELECT_MEMORY_MODEL=y -CONFIG_FLATMEM_MANUAL=y -# CONFIG_DISCONTIGMEM_MANUAL is not set -# CONFIG_SPARSEMEM_MANUAL is not set -CONFIG_FLATMEM=y -CONFIG_FLAT_NODE_MEM_MAP=y -CONFIG_BINFMT_ELF=y -CONFIG_BINFMT_MISC=m -CONFIG_PROC_DEVICETREE=y -# CONFIG_PREP_RESIDUAL is not set -# CONFIG_CMDLINE_BOOL is not set -# CONFIG_PM_DEBUG is not set -CONFIG_SOFTWARE_SUSPEND=y -CONFIG_PM_STD_PARTITION="" -# CONFIG_SECCOMP is not set -CONFIG_ISA_DMA_API=y - -# -# Bus options -# -# CONFIG_ISA is not set -CONFIG_GENERIC_ISA_DMA=y -CONFIG_PCI=y -CONFIG_PCI_DOMAINS=y -CONFIG_PCI_LEGACY_PROC=y -CONFIG_PCI_NAMES=y -# CONFIG_PCI_DEBUG is not set - -# -# PCCARD (PCMCIA/CardBus) support -# -CONFIG_PCCARD=m -# CONFIG_PCMCIA_DEBUG is not set -CONFIG_PCMCIA=m -# CONFIG_PCMCIA_LOAD_CIS is not set -# CONFIG_PCMCIA_IOCTL is not set -CONFIG_CARDBUS=y - -# -# PC-card bridges -# -CONFIG_YENTA=m -# CONFIG_PD6729 is not set -# CONFIG_I82092 is not set -# CONFIG_TCIC is not set -CONFIG_PCCARD_NONSTATIC=m - -# -# Advanced setup -# -CONFIG_ADVANCED_OPTIONS=y -CONFIG_HIGHMEM_START=0xfe000000 -# CONFIG_LOWMEM_SIZE_BOOL is not set -CONFIG_LOWMEM_SIZE=0x30000000 -# CONFIG_KERNEL_START_BOOL is not set -CONFIG_KERNEL_START=0xc0000000 -CONFIG_TASK_SIZE_BOOL=y -CONFIG_TASK_SIZE=0xc0000000 -CONFIG_BOOT_LOAD=0x00800000 - -# -# Networking -# -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set -CONFIG_UNIX=y -# CONFIG_NET_KEY is not set -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_FIB_HASH=y -# CONFIG_IP_PNP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_IP_MROUTE is not set -# CONFIG_ARPD is not set -CONFIG_SYN_COOKIES=y -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_TUNNEL is not set -CONFIG_IP_TCPDIAG=y -# CONFIG_IP_TCPDIAG_IPV6 is not set -# CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_BIC=y - -# -# IP: Virtual Server Configuration -# -# CONFIG_IP_VS is not set -# CONFIG_IPV6 is not set -CONFIG_NETFILTER=y -# CONFIG_NETFILTER_DEBUG is not set - -# -# IP: Netfilter Configuration -# -CONFIG_IP_NF_CONNTRACK=m -CONFIG_IP_NF_CT_ACCT=y -CONFIG_IP_NF_CONNTRACK_MARK=y -CONFIG_IP_NF_CT_PROTO_SCTP=m -CONFIG_IP_NF_FTP=m -CONFIG_IP_NF_IRC=m -CONFIG_IP_NF_TFTP=m -CONFIG_IP_NF_AMANDA=m -CONFIG_IP_NF_QUEUE=m -CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_LIMIT=m -CONFIG_IP_NF_MATCH_IPRANGE=m -CONFIG_IP_NF_MATCH_MAC=m -CONFIG_IP_NF_MATCH_PKTTYPE=m -CONFIG_IP_NF_MATCH_MARK=m -CONFIG_IP_NF_MATCH_MULTIPORT=m -CONFIG_IP_NF_MATCH_TOS=m -CONFIG_IP_NF_MATCH_RECENT=m -CONFIG_IP_NF_MATCH_ECN=m -CONFIG_IP_NF_MATCH_DSCP=m -CONFIG_IP_NF_MATCH_AH_ESP=m -CONFIG_IP_NF_MATCH_LENGTH=m -CONFIG_IP_NF_MATCH_TTL=m -CONFIG_IP_NF_MATCH_TCPMSS=m -CONFIG_IP_NF_MATCH_HELPER=m -CONFIG_IP_NF_MATCH_STATE=m -CONFIG_IP_NF_MATCH_CONNTRACK=m -CONFIG_IP_NF_MATCH_OWNER=m -CONFIG_IP_NF_MATCH_ADDRTYPE=m -CONFIG_IP_NF_MATCH_REALM=m -CONFIG_IP_NF_MATCH_SCTP=m -CONFIG_IP_NF_MATCH_COMMENT=m -CONFIG_IP_NF_MATCH_CONNMARK=m -CONFIG_IP_NF_MATCH_HASHLIMIT=m -CONFIG_IP_NF_FILTER=m -CONFIG_IP_NF_TARGET_REJECT=m -CONFIG_IP_NF_TARGET_LOG=m -CONFIG_IP_NF_TARGET_ULOG=m -CONFIG_IP_NF_TARGET_TCPMSS=m -CONFIG_IP_NF_NAT=m -CONFIG_IP_NF_NAT_NEEDED=y -CONFIG_IP_NF_TARGET_MASQUERADE=m -CONFIG_IP_NF_TARGET_REDIRECT=m -CONFIG_IP_NF_TARGET_NETMAP=m -CONFIG_IP_NF_TARGET_SAME=m -CONFIG_IP_NF_NAT_SNMP_BASIC=m -CONFIG_IP_NF_NAT_IRC=m -CONFIG_IP_NF_NAT_FTP=m -CONFIG_IP_NF_NAT_TFTP=m -CONFIG_IP_NF_NAT_AMANDA=m -CONFIG_IP_NF_MANGLE=m -CONFIG_IP_NF_TARGET_TOS=m -CONFIG_IP_NF_TARGET_ECN=m -CONFIG_IP_NF_TARGET_DSCP=m -CONFIG_IP_NF_TARGET_MARK=m -CONFIG_IP_NF_TARGET_CLASSIFY=m -CONFIG_IP_NF_TARGET_CONNMARK=m -CONFIG_IP_NF_TARGET_CLUSTERIP=m -CONFIG_IP_NF_RAW=m -CONFIG_IP_NF_TARGET_NOTRACK=m -CONFIG_IP_NF_ARPTABLES=m -CONFIG_IP_NF_ARPFILTER=m -CONFIG_IP_NF_ARP_MANGLE=m - -# -# SCTP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_SCTP is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set -# CONFIG_NET_SCHED is not set -CONFIG_NET_CLS_ROUTE=y - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -CONFIG_NETPOLL=y -# CONFIG_NETPOLL_RX is not set -# CONFIG_NETPOLL_TRAP is not set -CONFIG_NET_POLL_CONTROLLER=y -# CONFIG_HAMRADIO is not set -CONFIG_IRDA=m - -# -# IrDA protocols -# -CONFIG_IRLAN=m -CONFIG_IRNET=m -CONFIG_IRCOMM=m -# CONFIG_IRDA_ULTRA is not set - -# -# IrDA options -# -CONFIG_IRDA_CACHE_LAST_LSAP=y -CONFIG_IRDA_FAST_RR=y -# CONFIG_IRDA_DEBUG is not set - -# -# Infrared-port device drivers -# - -# -# SIR device drivers -# -CONFIG_IRTTY_SIR=m - -# -# Dongle support -# -# CONFIG_DONGLE is not set - -# -# Old SIR device drivers -# -# CONFIG_IRPORT_SIR is not set - -# -# Old Serial dongle support -# - -# -# FIR device drivers -# -# CONFIG_USB_IRDA is not set -# CONFIG_SIGMATEL_FIR is not set -# CONFIG_NSC_FIR is not set -# CONFIG_WINBOND_FIR is not set -# CONFIG_TOSHIBA_FIR is not set -# CONFIG_SMC_IRCC_FIR is not set -# CONFIG_ALI_FIR is not set -# CONFIG_VLSI_FIR is not set -# CONFIG_VIA_FIR is not set -# CONFIG_BT is not set - -# -# Device Drivers -# - -# -# Generic Driver Options -# -# CONFIG_STANDALONE is not set -CONFIG_PREVENT_FIRMWARE_BUILD=y -CONFIG_FW_LOADER=m -# CONFIG_DEBUG_DRIVER is not set - -# -# Memory Technology Devices (MTD) -# -# CONFIG_MTD is not set - -# -# Parallel port support -# -# CONFIG_PARPORT is not set - -# -# Plug and Play support -# - -# -# Block devices -# -# CONFIG_BLK_DEV_FD is not set -CONFIG_MAC_FLOPPY=m -# CONFIG_BLK_CPQ_DA is not set -# CONFIG_BLK_CPQ_CISS_DA is not set -# CONFIG_BLK_DEV_DAC960 is not set -# CONFIG_BLK_DEV_UMEM is not set -# CONFIG_BLK_DEV_COW_COMMON is not set -CONFIG_BLK_DEV_LOOP=y -# CONFIG_BLK_DEV_CRYPTOLOOP is not set -# CONFIG_BLK_DEV_NBD is not set -# CONFIG_BLK_DEV_SX8 is not set -# CONFIG_BLK_DEV_UB is not set -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_COUNT=16 -CONFIG_BLK_DEV_RAM_SIZE=4096 -CONFIG_BLK_DEV_INITRD=y -CONFIG_INITRAMFS_SOURCE="" -CONFIG_LBD=y -CONFIG_CDROM_PKTCDVD=m -CONFIG_CDROM_PKTCDVD_BUFFERS=8 -# CONFIG_CDROM_PKTCDVD_WCACHE is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y -# CONFIG_ATA_OVER_ETH is not set - -# -# ATA/ATAPI/MFM/RLL support -# -CONFIG_IDE=y -CONFIG_BLK_DEV_IDE=y - -# -# Please see Documentation/ide.txt for help/info on IDE drives -# -# CONFIG_BLK_DEV_IDE_SATA is not set -CONFIG_BLK_DEV_IDEDISK=y -# CONFIG_IDEDISK_MULTI_MODE is not set -# CONFIG_BLK_DEV_IDECS is not set -CONFIG_BLK_DEV_IDECD=y -# CONFIG_BLK_DEV_IDETAPE is not set -CONFIG_BLK_DEV_IDEFLOPPY=y -CONFIG_BLK_DEV_IDESCSI=y -# CONFIG_IDE_TASK_IOCTL is not set - -# -# IDE chipset support/bugfixes -# -# CONFIG_IDE_GENERIC is not set -CONFIG_BLK_DEV_IDEPCI=y -CONFIG_IDEPCI_SHARE_IRQ=y -# CONFIG_BLK_DEV_OFFBOARD is not set -CONFIG_BLK_DEV_GENERIC=y -# CONFIG_BLK_DEV_OPTI621 is not set -# CONFIG_BLK_DEV_SL82C105 is not set -CONFIG_BLK_DEV_IDEDMA_PCI=y -# CONFIG_BLK_DEV_IDEDMA_FORCED is not set -CONFIG_IDEDMA_PCI_AUTO=y -# CONFIG_IDEDMA_ONLYDISK is not set -# CONFIG_BLK_DEV_AEC62XX is not set -# CONFIG_BLK_DEV_ALI15X3 is not set -# CONFIG_BLK_DEV_AMD74XX is not set -CONFIG_BLK_DEV_CMD64X=y -# CONFIG_BLK_DEV_TRIFLEX is not set -# CONFIG_BLK_DEV_CY82C693 is not set -# CONFIG_BLK_DEV_CS5520 is not set -# CONFIG_BLK_DEV_CS5530 is not set -# CONFIG_BLK_DEV_HPT34X is not set -# CONFIG_BLK_DEV_HPT366 is not set -# CONFIG_BLK_DEV_SC1200 is not set -# CONFIG_BLK_DEV_PIIX is not set -# CONFIG_BLK_DEV_IT821X is not set -# CONFIG_BLK_DEV_NS87415 is not set -# CONFIG_BLK_DEV_PDC202XX_OLD is not set -CONFIG_BLK_DEV_PDC202XX_NEW=y -# CONFIG_PDC202XX_FORCE is not set -# CONFIG_BLK_DEV_SVWKS is not set -# CONFIG_BLK_DEV_SIIMAGE is not set -# CONFIG_BLK_DEV_SLC90E66 is not set -# CONFIG_BLK_DEV_TRM290 is not set -# CONFIG_BLK_DEV_VIA82CXXX is not set -CONFIG_BLK_DEV_IDE_PMAC=y -CONFIG_BLK_DEV_IDE_PMAC_ATA100FIRST=y -CONFIG_BLK_DEV_IDEDMA_PMAC=y -CONFIG_BLK_DEV_IDE_PMAC_BLINK=y -# CONFIG_IDE_ARM is not set -CONFIG_BLK_DEV_IDEDMA=y -# CONFIG_IDEDMA_IVB is not set -CONFIG_IDEDMA_AUTO=y -# CONFIG_BLK_DEV_HD is not set - -# -# SCSI device support -# -CONFIG_SCSI=y -CONFIG_SCSI_PROC_FS=y - -# -# SCSI support type (disk, tape, CD-ROM) -# -CONFIG_BLK_DEV_SD=y -CONFIG_CHR_DEV_ST=y -# CONFIG_CHR_DEV_OSST is not set -CONFIG_BLK_DEV_SR=y -CONFIG_BLK_DEV_SR_VENDOR=y -CONFIG_CHR_DEV_SG=y -# CONFIG_CHR_DEV_SCH is not set - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# -# CONFIG_SCSI_MULTI_LUN is not set -CONFIG_SCSI_CONSTANTS=y -# CONFIG_SCSI_LOGGING is not set - -# -# SCSI Transport Attributes -# -CONFIG_SCSI_SPI_ATTRS=y -# CONFIG_SCSI_FC_ATTRS is not set -# CONFIG_SCSI_ISCSI_ATTRS is not set - -# -# SCSI low-level drivers -# -# CONFIG_BLK_DEV_3W_XXXX_RAID is not set -# CONFIG_SCSI_3W_9XXX is not set -# CONFIG_SCSI_ACARD is not set -# CONFIG_SCSI_AACRAID is not set -CONFIG_SCSI_AIC7XXX=m -CONFIG_AIC7XXX_CMDS_PER_DEVICE=253 -CONFIG_AIC7XXX_RESET_DELAY_MS=15000 -CONFIG_AIC7XXX_DEBUG_ENABLE=y -CONFIG_AIC7XXX_DEBUG_MASK=0 -CONFIG_AIC7XXX_REG_PRETTY_PRINT=y -CONFIG_SCSI_AIC7XXX_OLD=m -# CONFIG_SCSI_AIC79XX is not set -# CONFIG_SCSI_DPT_I2O is not set -# CONFIG_MEGARAID_NEWGEN is not set -# CONFIG_MEGARAID_LEGACY is not set -# CONFIG_SCSI_SATA is not set -# CONFIG_SCSI_BUSLOGIC is not set -# CONFIG_SCSI_DMX3191D is not set -# CONFIG_SCSI_EATA is not set -# CONFIG_SCSI_FUTURE_DOMAIN is not set -# CONFIG_SCSI_GDTH is not set -# CONFIG_SCSI_IPS is not set -# CONFIG_SCSI_INITIO is not set -# CONFIG_SCSI_INIA100 is not set -CONFIG_SCSI_SYM53C8XX_2=y -CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=0 -CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16 -CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64 -# CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set -# CONFIG_SCSI_IPR is not set -# CONFIG_SCSI_QLOGIC_FC is not set -# CONFIG_SCSI_QLOGIC_1280 is not set -CONFIG_SCSI_QLA2XXX=y -# CONFIG_SCSI_QLA21XX is not set -# CONFIG_SCSI_QLA22XX is not set -# CONFIG_SCSI_QLA2300 is not set -# CONFIG_SCSI_QLA2322 is not set -# CONFIG_SCSI_QLA6312 is not set -# CONFIG_SCSI_LPFC is not set -# CONFIG_SCSI_DC395x is not set -# CONFIG_SCSI_DC390T is not set -# CONFIG_SCSI_NSP32 is not set -# CONFIG_SCSI_DEBUG is not set -CONFIG_SCSI_MESH=y -CONFIG_SCSI_MESH_SYNC_RATE=5 -CONFIG_SCSI_MESH_RESET_DELAY_MS=1000 -CONFIG_SCSI_MAC53C94=y - -# -# PCMCIA SCSI adapter support -# -# CONFIG_PCMCIA_AHA152X is not set -# CONFIG_PCMCIA_FDOMAIN is not set -# CONFIG_PCMCIA_NINJA_SCSI is not set -# CONFIG_PCMCIA_QLOGIC is not set -# CONFIG_PCMCIA_SYM53C500 is not set - -# -# Multi-device support (RAID and LVM) -# -# CONFIG_MD is not set - -# -# Fusion MPT device support -# -# CONFIG_FUSION is not set -# CONFIG_FUSION_SPI is not set -# CONFIG_FUSION_FC is not set - -# -# IEEE 1394 (FireWire) support -# -CONFIG_IEEE1394=m - -# -# Subsystem Options -# -# CONFIG_IEEE1394_VERBOSEDEBUG is not set -# CONFIG_IEEE1394_OUI_DB is not set -CONFIG_IEEE1394_EXTRA_CONFIG_ROMS=y -CONFIG_IEEE1394_CONFIG_ROM_IP1394=y -# CONFIG_IEEE1394_EXPORT_FULL_API is not set - -# -# Device Drivers -# -# CONFIG_IEEE1394_PCILYNX is not set -CONFIG_IEEE1394_OHCI1394=m - -# -# Protocol Drivers -# -CONFIG_IEEE1394_VIDEO1394=m -CONFIG_IEEE1394_SBP2=m -# CONFIG_IEEE1394_SBP2_PHYS_DMA is not set -CONFIG_IEEE1394_ETH1394=m -CONFIG_IEEE1394_DV1394=m -CONFIG_IEEE1394_RAWIO=m -CONFIG_IEEE1394_CMP=m -CONFIG_IEEE1394_AMDTP=m - -# -# I2O device support -# -# CONFIG_I2O is not set - -# -# Macintosh device drivers -# -CONFIG_ADB=y -CONFIG_ADB_CUDA=y -CONFIG_ADB_PMU=y -CONFIG_PMAC_APM_EMU=y -CONFIG_PMAC_MEDIABAY=y -CONFIG_PMAC_BACKLIGHT=y -CONFIG_ADB_MACIO=y -CONFIG_INPUT_ADBHID=y -CONFIG_MAC_EMUMOUSEBTN=y -CONFIG_THERM_WINDTUNNEL=m -CONFIG_THERM_ADT746X=m -# CONFIG_ANSLCD is not set - -# -# Network device support -# -CONFIG_NETDEVICES=y -# CONFIG_DUMMY is not set -# CONFIG_BONDING is not set -# CONFIG_EQUALIZER is not set -CONFIG_TUN=m - -# -# ARCnet devices -# -# CONFIG_ARCNET is not set - -# -# Ethernet (10 or 100Mbit) -# -CONFIG_NET_ETHERNET=y -CONFIG_MII=y -CONFIG_MACE=y -# CONFIG_MACE_AAUI_PORT is not set -CONFIG_BMAC=y -# CONFIG_HAPPYMEAL is not set -CONFIG_SUNGEM=y -# CONFIG_NET_VENDOR_3COM is not set - -# -# Tulip family network device support -# -# CONFIG_NET_TULIP is not set -# CONFIG_HP100 is not set -CONFIG_NET_PCI=y -CONFIG_PCNET32=y -# CONFIG_AMD8111_ETH is not set -# CONFIG_ADAPTEC_STARFIRE is not set -# CONFIG_B44 is not set -# CONFIG_FORCEDETH is not set -# CONFIG_DGRS is not set -# CONFIG_EEPRO100 is not set -# CONFIG_E100 is not set -# CONFIG_FEALNX is not set -# CONFIG_NATSEMI is not set -# CONFIG_NE2K_PCI is not set -# CONFIG_8139CP is not set -# CONFIG_8139TOO is not set -# CONFIG_SIS900 is not set -# CONFIG_EPIC100 is not set -# CONFIG_SUNDANCE is not set -# CONFIG_TLAN is not set -# CONFIG_VIA_RHINE is not set - -# -# Ethernet (1000 Mbit) -# -# CONFIG_ACENIC is not set -# CONFIG_DL2K is not set -# CONFIG_E1000 is not set -# CONFIG_NS83820 is not set -# CONFIG_HAMACHI is not set -# CONFIG_YELLOWFIN is not set -# CONFIG_R8169 is not set -# CONFIG_SKGE is not set -# CONFIG_SK98LIN is not set -# CONFIG_VIA_VELOCITY is not set -# CONFIG_TIGON3 is not set -# CONFIG_BNX2 is not set -# CONFIG_MV643XX_ETH is not set - -# -# Ethernet (10000 Mbit) -# -# CONFIG_IXGB is not set -# CONFIG_S2IO is not set - -# -# Token Ring devices -# -# CONFIG_TR is not set - -# -# Wireless LAN (non-hamradio) -# -CONFIG_NET_RADIO=y - -# -# Obsolete Wireless cards support (pre-802.11) -# -# CONFIG_STRIP is not set -# CONFIG_PCMCIA_WAVELAN is not set -# CONFIG_PCMCIA_NETWAVE is not set - -# -# Wireless 802.11 Frequency Hopping cards support -# -# CONFIG_PCMCIA_RAYCS is not set - -# -# Wireless 802.11b ISA/PCI cards support -# -CONFIG_HERMES=m -CONFIG_APPLE_AIRPORT=m -# CONFIG_PLX_HERMES is not set -# CONFIG_TMD_HERMES is not set -# CONFIG_PCI_HERMES is not set -# CONFIG_ATMEL is not set - -# -# Wireless 802.11b Pcmcia/Cardbus cards support -# -CONFIG_PCMCIA_HERMES=m -# CONFIG_AIRO_CS is not set -# CONFIG_PCMCIA_WL3501 is not set - -# -# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support -# -# CONFIG_PRISM54 is not set -CONFIG_NET_WIRELESS=y - -# -# PCMCIA network device support -# -# CONFIG_NET_PCMCIA is not set - -# -# Wan interfaces -# -# CONFIG_WAN is not set -# CONFIG_FDDI is not set -# CONFIG_HIPPI is not set -CONFIG_PPP=y -CONFIG_PPP_MULTILINK=y -# CONFIG_PPP_FILTER is not set -CONFIG_PPP_ASYNC=y -CONFIG_PPP_SYNC_TTY=m -CONFIG_PPP_DEFLATE=y -CONFIG_PPP_BSDCOMP=m -CONFIG_PPPOE=m -# CONFIG_SLIP is not set -# CONFIG_NET_FC is not set -# CONFIG_SHAPER is not set -CONFIG_NETCONSOLE=m - -# -# ISDN subsystem -# -# CONFIG_ISDN is not set - -# -# Telephony Support -# -# CONFIG_PHONE is not set - -# -# Input device support -# -CONFIG_INPUT=y - -# -# Userland interfaces -# -CONFIG_INPUT_MOUSEDEV=y -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 -# CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set -CONFIG_INPUT_EVDEV=y -# CONFIG_INPUT_EVBUG is not set - -# -# Input Device Drivers -# -CONFIG_INPUT_KEYBOARD=y -# CONFIG_KEYBOARD_ATKBD is not set -# CONFIG_KEYBOARD_SUNKBD is not set -# CONFIG_KEYBOARD_LKKBD is not set -# CONFIG_KEYBOARD_XTKBD is not set -# CONFIG_KEYBOARD_NEWTON is not set -CONFIG_INPUT_MOUSE=y -# CONFIG_MOUSE_PS2 is not set -# CONFIG_MOUSE_SERIAL is not set -# CONFIG_MOUSE_VSXXXAA is not set -# CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TOUCHSCREEN is not set -# CONFIG_INPUT_MISC is not set - -# -# Hardware I/O ports -# -# CONFIG_SERIO is not set -# CONFIG_GAMEPORT is not set - -# -# Character devices -# -CONFIG_VT=y -CONFIG_VT_CONSOLE=y -CONFIG_HW_CONSOLE=y -# CONFIG_SERIAL_NONSTANDARD is not set - -# -# Serial drivers -# -CONFIG_SERIAL_8250=m -CONFIG_SERIAL_8250_CS=m -CONFIG_SERIAL_8250_NR_UARTS=4 -# CONFIG_SERIAL_8250_EXTENDED is not set - -# -# Non-8250 serial port support -# -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -CONFIG_SERIAL_PMACZILOG=y -CONFIG_SERIAL_PMACZILOG_CONSOLE=y -# CONFIG_SERIAL_JSM is not set -CONFIG_UNIX98_PTYS=y -CONFIG_LEGACY_PTYS=y -CONFIG_LEGACY_PTY_COUNT=256 - -# -# IPMI -# -# CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -# CONFIG_WATCHDOG is not set -CONFIG_NVRAM=y -CONFIG_GEN_RTC=y -# CONFIG_GEN_RTC_X is not set -# CONFIG_DTLK is not set -# CONFIG_R3964 is not set -# CONFIG_APPLICOM is not set - -# -# Ftape, the floppy tape device driver -# -CONFIG_AGP=m -CONFIG_AGP_UNINORTH=m -CONFIG_DRM=m -# CONFIG_DRM_TDFX is not set -CONFIG_DRM_R128=m -CONFIG_DRM_RADEON=m -# CONFIG_DRM_MGA is not set -# CONFIG_DRM_SIS is not set -# CONFIG_DRM_VIA is not set - -# -# PCMCIA character devices -# -# CONFIG_SYNCLINK_CS is not set -# CONFIG_RAW_DRIVER is not set - -# -# TPM devices -# -# CONFIG_TCG_TPM is not set - -# -# I2C support -# -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=m - -# -# I2C Algorithms -# -CONFIG_I2C_ALGOBIT=y -# CONFIG_I2C_ALGOPCF is not set -# CONFIG_I2C_ALGOPCA is not set - -# -# I2C Hardware Bus support -# -# CONFIG_I2C_ALI1535 is not set -# CONFIG_I2C_ALI1563 is not set -# CONFIG_I2C_ALI15X3 is not set -# CONFIG_I2C_AMD756 is not set -# CONFIG_I2C_AMD8111 is not set -# CONFIG_I2C_HYDRA is not set -# CONFIG_I2C_I801 is not set -# CONFIG_I2C_I810 is not set -# CONFIG_I2C_PIIX4 is not set -# CONFIG_I2C_ISA is not set -CONFIG_I2C_KEYWEST=m -# CONFIG_I2C_MPC is not set -# CONFIG_I2C_NFORCE2 is not set -# CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_PROSAVAGE is not set -# CONFIG_I2C_SAVAGE4 is not set -# CONFIG_SCx200_ACB is not set -# CONFIG_I2C_SIS5595 is not set -# CONFIG_I2C_SIS630 is not set -# CONFIG_I2C_SIS96X is not set -# CONFIG_I2C_STUB is not set -# CONFIG_I2C_VIA is not set -# CONFIG_I2C_VIAPRO is not set -# CONFIG_I2C_VOODOO3 is not set -# CONFIG_I2C_PCA_ISA is not set -# CONFIG_I2C_SENSOR is not set - -# -# Miscellaneous I2C Chip support -# -# CONFIG_SENSORS_DS1337 is not set -# CONFIG_SENSORS_DS1374 is not set -# CONFIG_SENSORS_EEPROM is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_RTC8564 is not set -# CONFIG_SENSORS_M41T00 is not set -# CONFIG_SENSORS_MAX6875 is not set -# CONFIG_I2C_DEBUG_CORE is not set -# CONFIG_I2C_DEBUG_ALGO is not set -# CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_I2C_DEBUG_CHIP is not set - -# -# Dallas's 1-wire bus -# -# CONFIG_W1 is not set - -# -# Hardware Monitoring support -# -# CONFIG_HWMON is not set - -# -# Misc devices -# - -# -# Multimedia devices -# -# CONFIG_VIDEO_DEV is not set - -# -# Digital Video Broadcasting Devices -# -# CONFIG_DVB is not set - -# -# Graphics support -# -CONFIG_FB=y -CONFIG_FB_CFB_FILLRECT=y -CONFIG_FB_CFB_COPYAREA=y -CONFIG_FB_CFB_IMAGEBLIT=y -CONFIG_FB_SOFT_CURSOR=y -CONFIG_FB_MACMODES=y -CONFIG_FB_MODE_HELPERS=y -CONFIG_FB_TILEBLITTING=y -# CONFIG_FB_CIRRUS is not set -# CONFIG_FB_PM2 is not set -# CONFIG_FB_CYBER2000 is not set -CONFIG_FB_OF=y -CONFIG_FB_CONTROL=y -CONFIG_FB_PLATINUM=y -CONFIG_FB_VALKYRIE=y -CONFIG_FB_CT65550=y -# CONFIG_FB_ASILIANT is not set -CONFIG_FB_IMSTT=y -# CONFIG_FB_VGA16 is not set -# CONFIG_FB_NVIDIA is not set -# CONFIG_FB_RIVA is not set -CONFIG_FB_MATROX=y -CONFIG_FB_MATROX_MILLENIUM=y -CONFIG_FB_MATROX_MYSTIQUE=y -CONFIG_FB_MATROX_G=y -# CONFIG_FB_MATROX_I2C is not set -# CONFIG_FB_MATROX_MULTIHEAD is not set -# CONFIG_FB_RADEON_OLD is not set -CONFIG_FB_RADEON=y -CONFIG_FB_RADEON_I2C=y -# CONFIG_FB_RADEON_DEBUG is not set -CONFIG_FB_ATY128=y -CONFIG_FB_ATY=y -CONFIG_FB_ATY_CT=y -CONFIG_FB_ATY_GENERIC_LCD=y -# CONFIG_FB_ATY_XL_INIT is not set -CONFIG_FB_ATY_GX=y -# CONFIG_FB_SAVAGE is not set -# CONFIG_FB_SIS is not set -# CONFIG_FB_NEOMAGIC is not set -# CONFIG_FB_KYRO is not set -CONFIG_FB_3DFX=y -CONFIG_FB_3DFX_ACCEL=y -# CONFIG_FB_VOODOO1 is not set -# CONFIG_FB_TRIDENT is not set -# CONFIG_FB_S1D13XXX is not set -# CONFIG_FB_VIRTUAL is not set - -# -# Console display driver support -# -# CONFIG_VGA_CONSOLE is not set -CONFIG_DUMMY_CONSOLE=y -CONFIG_FRAMEBUFFER_CONSOLE=y -# CONFIG_FONTS is not set -CONFIG_FONT_8x8=y -CONFIG_FONT_8x16=y - -# -# Logo configuration -# -CONFIG_LOGO=y -CONFIG_LOGO_LINUX_MONO=y -CONFIG_LOGO_LINUX_VGA16=y -CONFIG_LOGO_LINUX_CLUT224=y -CONFIG_BACKLIGHT_LCD_SUPPORT=y -CONFIG_BACKLIGHT_CLASS_DEVICE=y -CONFIG_BACKLIGHT_DEVICE=y -CONFIG_LCD_CLASS_DEVICE=y -CONFIG_LCD_DEVICE=y - -# -# Sound -# -CONFIG_SOUND=m -CONFIG_DMASOUND_PMAC=m -CONFIG_DMASOUND=m - -# -# Advanced Linux Sound Architecture -# -CONFIG_SND=m -CONFIG_SND_TIMER=m -CONFIG_SND_PCM=m -CONFIG_SND_HWDEP=m -CONFIG_SND_RAWMIDI=m -CONFIG_SND_SEQUENCER=m -CONFIG_SND_SEQ_DUMMY=m -CONFIG_SND_OSSEMUL=y -CONFIG_SND_MIXER_OSS=m -CONFIG_SND_PCM_OSS=m -CONFIG_SND_SEQUENCER_OSS=y -# CONFIG_SND_VERBOSE_PRINTK is not set -# CONFIG_SND_DEBUG is not set - -# -# Generic devices -# -CONFIG_SND_DUMMY=m -# CONFIG_SND_VIRMIDI is not set -# CONFIG_SND_MTPAV is not set -# CONFIG_SND_SERIAL_U16550 is not set -# CONFIG_SND_MPU401 is not set - -# -# PCI devices -# -# CONFIG_SND_ALI5451 is not set -# CONFIG_SND_ATIIXP is not set -# CONFIG_SND_ATIIXP_MODEM is not set -# CONFIG_SND_AU8810 is not set -# CONFIG_SND_AU8820 is not set -# CONFIG_SND_AU8830 is not set -# CONFIG_SND_AZT3328 is not set -# CONFIG_SND_BT87X is not set -# CONFIG_SND_CS46XX is not set -# CONFIG_SND_CS4281 is not set -# CONFIG_SND_EMU10K1 is not set -# CONFIG_SND_EMU10K1X is not set -# CONFIG_SND_CA0106 is not set -# CONFIG_SND_KORG1212 is not set -# CONFIG_SND_MIXART is not set -# CONFIG_SND_NM256 is not set -# CONFIG_SND_RME32 is not set -# CONFIG_SND_RME96 is not set -# CONFIG_SND_RME9652 is not set -# CONFIG_SND_HDSP is not set -# CONFIG_SND_HDSPM is not set -# CONFIG_SND_TRIDENT is not set -# CONFIG_SND_YMFPCI is not set -# CONFIG_SND_ALS4000 is not set -# CONFIG_SND_CMIPCI is not set -# CONFIG_SND_ENS1370 is not set -# CONFIG_SND_ENS1371 is not set -# CONFIG_SND_ES1938 is not set -# CONFIG_SND_ES1968 is not set -# CONFIG_SND_MAESTRO3 is not set -# CONFIG_SND_FM801 is not set -# CONFIG_SND_ICE1712 is not set -# CONFIG_SND_ICE1724 is not set -# CONFIG_SND_INTEL8X0 is not set -# CONFIG_SND_INTEL8X0M is not set -# CONFIG_SND_SONICVIBES is not set -# CONFIG_SND_VIA82XX is not set -# CONFIG_SND_VIA82XX_MODEM is not set -# CONFIG_SND_VX222 is not set -# CONFIG_SND_HDA_INTEL is not set - -# -# ALSA PowerMac devices -# -CONFIG_SND_POWERMAC=m - -# -# USB devices -# -CONFIG_SND_USB_AUDIO=m -CONFIG_SND_USB_USX2Y=m - -# -# PCMCIA devices -# - -# -# Open Sound System -# -# CONFIG_SOUND_PRIME is not set - -# -# USB support -# -CONFIG_USB_ARCH_HAS_HCD=y -CONFIG_USB_ARCH_HAS_OHCI=y -CONFIG_USB=y -# CONFIG_USB_DEBUG is not set - -# -# Miscellaneous USB options -# -CONFIG_USB_DEVICEFS=y -# CONFIG_USB_BANDWIDTH is not set -CONFIG_USB_DYNAMIC_MINORS=y -CONFIG_USB_SUSPEND=y -# CONFIG_USB_OTG is not set - -# -# USB Host Controller Drivers -# -# CONFIG_USB_EHCI_HCD is not set -# CONFIG_USB_ISP116X_HCD is not set -CONFIG_USB_OHCI_HCD=y -# CONFIG_USB_OHCI_BIG_ENDIAN is not set -CONFIG_USB_OHCI_LITTLE_ENDIAN=y -# CONFIG_USB_UHCI_HCD is not set -# CONFIG_USB_SL811_HCD is not set - -# -# USB Device Class drivers -# -# CONFIG_USB_AUDIO is not set -# CONFIG_USB_BLUETOOTH_TTY is not set -# CONFIG_USB_MIDI is not set -CONFIG_USB_ACM=m -CONFIG_USB_PRINTER=m - -# -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information -# -# CONFIG_USB_STORAGE is not set - -# -# USB Input Devices -# -CONFIG_USB_HID=y -CONFIG_USB_HIDINPUT=y -# CONFIG_HID_FF is not set -CONFIG_USB_HIDDEV=y -# CONFIG_USB_AIPTEK is not set -# CONFIG_USB_WACOM is not set -# CONFIG_USB_ACECAD is not set -# CONFIG_USB_KBTAB is not set -# CONFIG_USB_POWERMATE is not set -# CONFIG_USB_MTOUCH is not set -# CONFIG_USB_ITMTOUCH is not set -# CONFIG_USB_EGALAX is not set -# CONFIG_USB_XPAD is not set -# CONFIG_USB_ATI_REMOTE is not set -# CONFIG_USB_KEYSPAN_REMOTE is not set - -# -# USB Imaging devices -# -# CONFIG_USB_MDC800 is not set -# CONFIG_USB_MICROTEK is not set - -# -# USB Multimedia devices -# -# CONFIG_USB_DABUSB is not set - -# -# Video4Linux support is needed for USB Multimedia device support -# - -# -# USB Network Adapters -# -# CONFIG_USB_CATC is not set -# CONFIG_USB_KAWETH is not set -CONFIG_USB_PEGASUS=m -# CONFIG_USB_RTL8150 is not set -# CONFIG_USB_USBNET is not set -# CONFIG_USB_ZD1201 is not set -# CONFIG_USB_MON is not set - -# -# USB port drivers -# - -# -# USB Serial Converter support -# -CONFIG_USB_SERIAL=m -# CONFIG_USB_SERIAL_GENERIC is not set -# CONFIG_USB_SERIAL_AIRPRIME is not set -# CONFIG_USB_SERIAL_BELKIN is not set -# CONFIG_USB_SERIAL_WHITEHEAT is not set -# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set -# CONFIG_USB_SERIAL_CP2101 is not set -# CONFIG_USB_SERIAL_CYPRESS_M8 is not set -# CONFIG_USB_SERIAL_EMPEG is not set -# CONFIG_USB_SERIAL_FTDI_SIO is not set -CONFIG_USB_SERIAL_VISOR=m -# CONFIG_USB_SERIAL_IPAQ is not set -# CONFIG_USB_SERIAL_IR is not set -# CONFIG_USB_SERIAL_EDGEPORT is not set -# CONFIG_USB_SERIAL_EDGEPORT_TI is not set -# CONFIG_USB_SERIAL_GARMIN is not set -# CONFIG_USB_SERIAL_IPW is not set -# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set -CONFIG_USB_SERIAL_KEYSPAN=m -CONFIG_USB_SERIAL_KEYSPAN_MPR=y -CONFIG_USB_SERIAL_KEYSPAN_USA28=y -CONFIG_USB_SERIAL_KEYSPAN_USA28X=y -CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y -CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y -CONFIG_USB_SERIAL_KEYSPAN_USA19=y -CONFIG_USB_SERIAL_KEYSPAN_USA18X=y -CONFIG_USB_SERIAL_KEYSPAN_USA19W=y -CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y -CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y -CONFIG_USB_SERIAL_KEYSPAN_USA49W=y -CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y -# CONFIG_USB_SERIAL_KLSI is not set -# CONFIG_USB_SERIAL_KOBIL_SCT is not set -# CONFIG_USB_SERIAL_MCT_U232 is not set -# CONFIG_USB_SERIAL_PL2303 is not set -# CONFIG_USB_SERIAL_HP4X is not set -# CONFIG_USB_SERIAL_SAFE is not set -# CONFIG_USB_SERIAL_TI is not set -# CONFIG_USB_SERIAL_CYBERJACK is not set -# CONFIG_USB_SERIAL_XIRCOM is not set -# CONFIG_USB_SERIAL_OPTION is not set -# CONFIG_USB_SERIAL_OMNINET is not set -CONFIG_USB_EZUSB=y - -# -# USB Miscellaneous drivers -# -# CONFIG_USB_EMI62 is not set -# CONFIG_USB_EMI26 is not set -# CONFIG_USB_AUERSWALD is not set -# CONFIG_USB_RIO500 is not set -# CONFIG_USB_LEGOTOWER is not set -# CONFIG_USB_LCD is not set -# CONFIG_USB_LED is not set -# CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGETKIT is not set -# CONFIG_USB_PHIDGETSERVO is not set -# CONFIG_USB_IDMOUSE is not set -# CONFIG_USB_LD is not set -# CONFIG_USB_TEST is not set - -# -# USB DSL modem support -# - -# -# USB Gadget Support -# -# CONFIG_USB_GADGET is not set - -# -# MMC/SD Card support -# -# CONFIG_MMC is not set - -# -# InfiniBand support -# -# CONFIG_INFINIBAND is not set - -# -# SN Devices -# - -# -# File systems -# -CONFIG_EXT2_FS=y -CONFIG_EXT2_FS_XATTR=y -# CONFIG_EXT2_FS_POSIX_ACL is not set -# CONFIG_EXT2_FS_SECURITY is not set -# CONFIG_EXT2_FS_XIP is not set -CONFIG_EXT3_FS=y -CONFIG_EXT3_FS_XATTR=y -# CONFIG_EXT3_FS_POSIX_ACL is not set -# CONFIG_EXT3_FS_SECURITY is not set -CONFIG_JBD=y -# CONFIG_JBD_DEBUG is not set -CONFIG_FS_MBCACHE=y -# CONFIG_REISERFS_FS is not set -# CONFIG_JFS_FS is not set -CONFIG_FS_POSIX_ACL=y - -# -# XFS support -# -# CONFIG_XFS_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set -CONFIG_INOTIFY=y -# CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y -# CONFIG_AUTOFS_FS is not set -# CONFIG_AUTOFS4_FS is not set - -# -# CD-ROM/DVD Filesystems -# -CONFIG_ISO9660_FS=y -# CONFIG_JOLIET is not set -# CONFIG_ZISOFS is not set -CONFIG_UDF_FS=m -CONFIG_UDF_NLS=y - -# -# DOS/FAT/NT Filesystems -# -CONFIG_FAT_FS=m -CONFIG_MSDOS_FS=m -CONFIG_VFAT_FS=m -CONFIG_FAT_DEFAULT_CODEPAGE=437 -CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" -# CONFIG_NTFS_FS is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -CONFIG_PROC_KCORE=y -CONFIG_SYSFS=y -CONFIG_DEVPTS_FS_XATTR=y -CONFIG_DEVPTS_FS_SECURITY=y -CONFIG_TMPFS=y -CONFIG_TMPFS_XATTR=y -CONFIG_TMPFS_SECURITY=y -# CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y - -# -# Miscellaneous filesystems -# -# CONFIG_ADFS_FS is not set -# CONFIG_AFFS_FS is not set -CONFIG_HFS_FS=m -CONFIG_HFSPLUS_FS=m -# CONFIG_BEFS_FS is not set -# CONFIG_BFS_FS is not set -# CONFIG_EFS_FS is not set -CONFIG_CRAMFS=m -# CONFIG_VXFS_FS is not set -# CONFIG_HPFS_FS is not set -# CONFIG_QNX4FS_FS is not set -# CONFIG_SYSV_FS is not set -# CONFIG_UFS_FS is not set - -# -# Network File Systems -# -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -CONFIG_NFS_V3_ACL=y -# CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set -CONFIG_NFSD=y -CONFIG_NFSD_V2_ACL=y -CONFIG_NFSD_V3=y -CONFIG_NFSD_V3_ACL=y -# CONFIG_NFSD_V4 is not set -CONFIG_NFSD_TCP=y -CONFIG_LOCKD=y -CONFIG_LOCKD_V4=y -CONFIG_EXPORTFS=y -CONFIG_NFS_ACL_SUPPORT=y -CONFIG_NFS_COMMON=y -CONFIG_SUNRPC=y -# CONFIG_RPCSEC_GSS_KRB5 is not set -# CONFIG_RPCSEC_GSS_SPKM3 is not set -CONFIG_SMB_FS=m -# CONFIG_SMB_NLS_DEFAULT is not set -# CONFIG_CIFS is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_AFS_FS is not set - -# -# Partition Types -# -CONFIG_PARTITION_ADVANCED=y -# CONFIG_ACORN_PARTITION is not set -# CONFIG_OSF_PARTITION is not set -# CONFIG_AMIGA_PARTITION is not set -# CONFIG_ATARI_PARTITION is not set -CONFIG_MAC_PARTITION=y -CONFIG_MSDOS_PARTITION=y -# CONFIG_BSD_DISKLABEL is not set -# CONFIG_MINIX_SUBPARTITION is not set -# CONFIG_SOLARIS_X86_PARTITION is not set -# CONFIG_UNIXWARE_DISKLABEL is not set -# CONFIG_LDM_PARTITION is not set -# CONFIG_SGI_PARTITION is not set -# CONFIG_ULTRIX_PARTITION is not set -# CONFIG_SUN_PARTITION is not set -# CONFIG_EFI_PARTITION is not set - -# -# Native Language Support -# -CONFIG_NLS=y -CONFIG_NLS_DEFAULT="iso8859-1" -# CONFIG_NLS_CODEPAGE_437 is not set -# CONFIG_NLS_CODEPAGE_737 is not set -# CONFIG_NLS_CODEPAGE_775 is not set -# CONFIG_NLS_CODEPAGE_850 is not set -# CONFIG_NLS_CODEPAGE_852 is not set -# CONFIG_NLS_CODEPAGE_855 is not set -# CONFIG_NLS_CODEPAGE_857 is not set -# CONFIG_NLS_CODEPAGE_860 is not set -# CONFIG_NLS_CODEPAGE_861 is not set -# CONFIG_NLS_CODEPAGE_862 is not set -# CONFIG_NLS_CODEPAGE_863 is not set -# CONFIG_NLS_CODEPAGE_864 is not set -# CONFIG_NLS_CODEPAGE_865 is not set -# CONFIG_NLS_CODEPAGE_866 is not set -# CONFIG_NLS_CODEPAGE_869 is not set -# CONFIG_NLS_CODEPAGE_936 is not set -# CONFIG_NLS_CODEPAGE_950 is not set -# CONFIG_NLS_CODEPAGE_932 is not set -# CONFIG_NLS_CODEPAGE_949 is not set -# CONFIG_NLS_CODEPAGE_874 is not set -# CONFIG_NLS_ISO8859_8 is not set -CONFIG_NLS_CODEPAGE_1250=m -CONFIG_NLS_CODEPAGE_1251=m -CONFIG_NLS_ASCII=m -CONFIG_NLS_ISO8859_1=m -# CONFIG_NLS_ISO8859_2 is not set -# CONFIG_NLS_ISO8859_3 is not set -# CONFIG_NLS_ISO8859_4 is not set -# CONFIG_NLS_ISO8859_5 is not set -# CONFIG_NLS_ISO8859_6 is not set -# CONFIG_NLS_ISO8859_7 is not set -# CONFIG_NLS_ISO8859_9 is not set -# CONFIG_NLS_ISO8859_13 is not set -# CONFIG_NLS_ISO8859_14 is not set -CONFIG_NLS_ISO8859_15=m -# CONFIG_NLS_KOI8_R is not set -# CONFIG_NLS_KOI8_U is not set -CONFIG_NLS_UTF8=m - -# -# Library routines -# -CONFIG_CRC_CCITT=y -CONFIG_CRC32=y -# CONFIG_LIBCRC32C is not set -CONFIG_ZLIB_INFLATE=y -CONFIG_ZLIB_DEFLATE=y - -# -# Profiling support -# -# CONFIG_PROFILING is not set - -# -# Kernel hacking -# -# CONFIG_PRINTK_TIME is not set -CONFIG_DEBUG_KERNEL=y -CONFIG_MAGIC_SYSRQ=y -CONFIG_LOG_BUF_SHIFT=16 -# CONFIG_SCHEDSTATS is not set -# CONFIG_DEBUG_SLAB is not set -# CONFIG_DEBUG_SPINLOCK is not set -# CONFIG_DEBUG_SPINLOCK_SLEEP is not set -# CONFIG_DEBUG_KOBJECT is not set -# CONFIG_DEBUG_INFO is not set -# CONFIG_DEBUG_FS is not set -# CONFIG_XMON is not set -# CONFIG_BDI_SWITCH is not set -CONFIG_BOOTX_TEXT=y - -# -# Security options -# -# CONFIG_KEYS is not set -# CONFIG_SECURITY is not set - -# -# Cryptographic options -# -# CONFIG_CRYPTO is not set - -# -# Hardware crypto devices -# diff --git a/arch/ppc/configs/power3_defconfig b/arch/ppc/configs/power3_defconfig deleted file mode 100644 index a1ef929bca5..00000000000 --- a/arch/ppc/configs/power3_defconfig +++ /dev/null @@ -1,1035 +0,0 @@ -# -# Automatically generated make config: don't edit -# -CONFIG_MMU=y -CONFIG_RWSEM_XCHGADD_ALGORITHM=y -CONFIG_HAVE_DEC_LOCK=y -CONFIG_PPC=y -CONFIG_PPC32=y -CONFIG_GENERIC_NVRAM=y - -# -# Code maturity level options -# -CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y -# CONFIG_STANDALONE is not set - -# -# General setup -# -CONFIG_SWAP=y -CONFIG_SYSVIPC=y -CONFIG_POSIX_MQUEUE=y -# CONFIG_BSD_PROCESS_ACCT is not set -CONFIG_SYSCTL=y -# CONFIG_AUDIT is not set -CONFIG_LOG_BUF_SHIFT=15 -# CONFIG_HOTPLUG is not set -CONFIG_IKCONFIG=y -CONFIG_IKCONFIG_PROC=y -# CONFIG_EMBEDDED is not set -CONFIG_KALLSYMS=y -CONFIG_FUTEX=y -CONFIG_EPOLL=y -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set - -# -# Loadable module support -# -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -CONFIG_MODULE_FORCE_UNLOAD=y -CONFIG_OBSOLETE_MODPARM=y -# CONFIG_MODVERSIONS is not set -CONFIG_KMOD=y -CONFIG_STOP_MACHINE=y - -# -# Processor -# -# CONFIG_6xx is not set -# CONFIG_40x is not set -# CONFIG_44x is not set -CONFIG_POWER3=y -# CONFIG_POWER4 is not set -# CONFIG_8xx is not set -# CONFIG_CPU_FREQ is not set -CONFIG_PPC64BRIDGE=y -CONFIG_PPC_STD_MMU=y - -# -# Platform options -# -CONFIG_PPC_MULTIPLATFORM=y -# CONFIG_APUS is not set -# CONFIG_WILLOW is not set -# CONFIG_PCORE is not set -# CONFIG_POWERPMC250 is not set -# CONFIG_EV64260 is not set -# CONFIG_SPRUCE is not set -# CONFIG_LOPEC is not set -# CONFIG_MCPN765 is not set -# CONFIG_MVME5100 is not set -# CONFIG_PPLUS is not set -# CONFIG_PRPMC750 is not set -# CONFIG_PRPMC800 is not set -# CONFIG_SANDPOINT is not set -# CONFIG_ADIR is not set -# CONFIG_K2 is not set -# CONFIG_PAL4 is not set -# CONFIG_GEMINI is not set -# CONFIG_EST8260 is not set -# CONFIG_SBS8260 is not set -# CONFIG_RPX6 is not set -# CONFIG_TQM8260 is not set -CONFIG_PPC_CHRP=y -CONFIG_PPC_PMAC=y -CONFIG_PPC_PREP=y -CONFIG_PPC_OF=y -CONFIG_PPCBUG_NVRAM=y -CONFIG_SMP=y -# CONFIG_IRQ_ALL_CPUS is not set -CONFIG_NR_CPUS=32 -# CONFIG_PREEMPT is not set -CONFIG_HIGHMEM=y -CONFIG_KERNEL_ELF=y -CONFIG_BINFMT_ELF=y -CONFIG_BINFMT_MISC=y -CONFIG_PROC_DEVICETREE=y -CONFIG_PPC_RTAS=y -# CONFIG_PREP_RESIDUAL is not set -# CONFIG_CMDLINE_BOOL is not set - -# -# Bus options -# -CONFIG_ISA=y -CONFIG_GENERIC_ISA_DMA=y -CONFIG_PCI=y -CONFIG_PCI_DOMAINS=y -CONFIG_PCI_LEGACY_PROC=y -CONFIG_PCI_NAMES=y - -# -# Advanced setup -# -CONFIG_ADVANCED_OPTIONS=y -# CONFIG_HIGHMEM_START_BOOL is not set -CONFIG_HIGHMEM_START=0xfe000000 -# CONFIG_LOWMEM_SIZE_BOOL is not set -CONFIG_LOWMEM_SIZE=0x30000000 -# CONFIG_KERNEL_START_BOOL is not set -CONFIG_KERNEL_START=0xc0000000 -CONFIG_TASK_SIZE_BOOL=y -CONFIG_TASK_SIZE=0xc0000000 -CONFIG_BOOT_LOAD=0x00800000 - -# -# Device Drivers -# - -# -# Generic Driver Options -# - -# -# Memory Technology Devices (MTD) -# -# CONFIG_MTD is not set - -# -# Parallel port support -# -CONFIG_PARPORT=m -CONFIG_PARPORT_PC=m -CONFIG_PARPORT_PC_CML1=m -# CONFIG_PARPORT_SERIAL is not set -CONFIG_PARPORT_PC_FIFO=y -# CONFIG_PARPORT_PC_SUPERIO is not set -# CONFIG_PARPORT_OTHER is not set -# CONFIG_PARPORT_1284 is not set - -# -# Plug and Play support -# -# CONFIG_PNP is not set - -# -# Block devices -# -CONFIG_BLK_DEV_FD=y -# CONFIG_BLK_DEV_XD is not set -# CONFIG_PARIDE is not set -# CONFIG_BLK_CPQ_DA is not set -# CONFIG_BLK_CPQ_CISS_DA is not set -# CONFIG_BLK_DEV_DAC960 is not set -# CONFIG_BLK_DEV_UMEM is not set -CONFIG_BLK_DEV_LOOP=y -# CONFIG_BLK_DEV_CRYPTOLOOP is not set -# CONFIG_BLK_DEV_NBD is not set -# CONFIG_BLK_DEV_CARMEL is not set -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=4096 -CONFIG_BLK_DEV_INITRD=y -CONFIG_LBD=y - -# -# ATA/ATAPI/MFM/RLL support -# -# CONFIG_IDE is not set - -# -# SCSI device support -# -CONFIG_SCSI=y -CONFIG_SCSI_PROC_FS=y - -# -# SCSI support type (disk, tape, CD-ROM) -# -CONFIG_BLK_DEV_SD=y -CONFIG_CHR_DEV_ST=y -# CONFIG_CHR_DEV_OSST is not set -CONFIG_BLK_DEV_SR=y -CONFIG_BLK_DEV_SR_VENDOR=y -CONFIG_CHR_DEV_SG=y - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# -# CONFIG_SCSI_MULTI_LUN is not set -# CONFIG_SCSI_REPORT_LUNS is not set -CONFIG_SCSI_CONSTANTS=y -CONFIG_SCSI_LOGGING=y - -# -# SCSI Transport Attributes -# -CONFIG_SCSI_SPI_ATTRS=y -# CONFIG_SCSI_FC_ATTRS is not set - -# -# SCSI low-level drivers -# -# CONFIG_BLK_DEV_3W_XXXX_RAID is not set -# CONFIG_SCSI_7000FASST is not set -# CONFIG_SCSI_ACARD is not set -# CONFIG_SCSI_AHA152X is not set -# CONFIG_SCSI_AHA1542 is not set -# CONFIG_SCSI_AACRAID is not set -# CONFIG_SCSI_AIC7XXX is not set -# CONFIG_SCSI_AIC7XXX_OLD is not set -# CONFIG_SCSI_AIC79XX is not set -# CONFIG_SCSI_ADVANSYS is not set -# CONFIG_SCSI_IN2000 is not set -# CONFIG_SCSI_MEGARAID is not set -# CONFIG_SCSI_SATA is not set -# CONFIG_SCSI_BUSLOGIC is not set -# CONFIG_SCSI_CPQFCTS is not set -# CONFIG_SCSI_DMX3191D is not set -# CONFIG_SCSI_DTC3280 is not set -# CONFIG_SCSI_EATA is not set -# CONFIG_SCSI_EATA_PIO is not set -# CONFIG_SCSI_FUTURE_DOMAIN is not set -# CONFIG_SCSI_GDTH is not set -# CONFIG_SCSI_GENERIC_NCR5380 is not set -# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set -# CONFIG_SCSI_IPS is not set -# CONFIG_SCSI_INIA100 is not set -# CONFIG_SCSI_PPA is not set -# CONFIG_SCSI_IMM is not set -# CONFIG_SCSI_NCR53C406A is not set -CONFIG_SCSI_SYM53C8XX_2=y -CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1 -CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16 -CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64 -# CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set -# CONFIG_SCSI_IPR is not set -# CONFIG_SCSI_PAS16 is not set -# CONFIG_SCSI_PSI240I is not set -# CONFIG_SCSI_QLOGIC_FAS is not set -# CONFIG_SCSI_QLOGIC_ISP is not set -# CONFIG_SCSI_QLOGIC_FC is not set -# CONFIG_SCSI_QLOGIC_1280 is not set -CONFIG_SCSI_QLA2XXX=y -# CONFIG_SCSI_QLA21XX is not set -# CONFIG_SCSI_QLA22XX is not set -# CONFIG_SCSI_QLA2300 is not set -# CONFIG_SCSI_QLA2322 is not set -# CONFIG_SCSI_QLA6312 is not set -# CONFIG_SCSI_QLA6322 is not set -# CONFIG_SCSI_SYM53C416 is not set -# CONFIG_SCSI_DC395x is not set -# CONFIG_SCSI_DC390T is not set -# CONFIG_SCSI_T128 is not set -# CONFIG_SCSI_U14_34F is not set -# CONFIG_SCSI_NSP32 is not set -# CONFIG_SCSI_DEBUG is not set -# CONFIG_SCSI_MESH is not set -# CONFIG_SCSI_MAC53C94 is not set - -# -# Old CD-ROM drivers (not SCSI, not IDE) -# -# CONFIG_CD_NO_IDESCSI is not set - -# -# Multi-device support (RAID and LVM) -# -CONFIG_MD=y -CONFIG_BLK_DEV_MD=y -CONFIG_MD_LINEAR=y -CONFIG_MD_RAID0=y -CONFIG_MD_RAID1=y -CONFIG_MD_RAID5=y -CONFIG_MD_RAID6=y -# CONFIG_MD_MULTIPATH is not set -CONFIG_BLK_DEV_DM=y -CONFIG_DM_CRYPT=y - -# -# Fusion MPT device support -# -# CONFIG_FUSION is not set - -# -# IEEE 1394 (FireWire) support -# -# CONFIG_IEEE1394 is not set - -# -# I2O device support -# -# CONFIG_I2O is not set - -# -# Macintosh device drivers -# -# CONFIG_ADB is not set -# CONFIG_ADB_CUDA is not set -# CONFIG_ADB_PMU is not set -# CONFIG_MAC_FLOPPY is not set -# CONFIG_MAC_SERIAL is not set - -# -# Networking support -# -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set -# CONFIG_NETLINK_DEV is not set -CONFIG_UNIX=y -# CONFIG_NET_KEY is not set -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -# CONFIG_IP_ADVANCED_ROUTER is not set -# CONFIG_IP_PNP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_IP_MROUTE is not set -# CONFIG_ARPD is not set -CONFIG_SYN_COOKIES=y -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_IPV6 is not set -# CONFIG_NETFILTER is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_SCTP is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set -# CONFIG_NET_HW_FLOWCONTROL is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set -# CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set -CONFIG_NETDEVICES=y -# CONFIG_DUMMY is not set -# CONFIG_BONDING is not set -# CONFIG_EQUALIZER is not set -# CONFIG_TUN is not set - -# -# ARCnet devices -# -# CONFIG_ARCNET is not set - -# -# Ethernet (10 or 100Mbit) -# -CONFIG_NET_ETHERNET=y -CONFIG_MII=y -# CONFIG_MACE is not set -# CONFIG_BMAC is not set -# CONFIG_OAKNET is not set -# CONFIG_HAPPYMEAL is not set -# CONFIG_SUNGEM is not set -# CONFIG_NET_VENDOR_3COM is not set -# CONFIG_LANCE is not set -# CONFIG_NET_VENDOR_SMC is not set -# CONFIG_NET_VENDOR_RACAL is not set - -# -# Tulip family network device support -# -# CONFIG_NET_TULIP is not set -# CONFIG_AT1700 is not set -# CONFIG_DEPCA is not set -# CONFIG_HP100 is not set -# CONFIG_NET_ISA is not set -CONFIG_NET_PCI=y -CONFIG_PCNET32=y -# CONFIG_AMD8111_ETH is not set -# CONFIG_ADAPTEC_STARFIRE is not set -# CONFIG_AC3200 is not set -# CONFIG_APRICOT is not set -# CONFIG_B44 is not set -# CONFIG_FORCEDETH is not set -# CONFIG_CS89x0 is not set -# CONFIG_DGRS is not set -# CONFIG_EEPRO100 is not set -CONFIG_E100=y -# CONFIG_E100_NAPI is not set -# CONFIG_FEALNX is not set -# CONFIG_NATSEMI is not set -# CONFIG_NE2K_PCI is not set -# CONFIG_8139CP is not set -# CONFIG_8139TOO is not set -# CONFIG_SIS900 is not set -# CONFIG_EPIC100 is not set -# CONFIG_SUNDANCE is not set -# CONFIG_TLAN is not set -# CONFIG_VIA_RHINE is not set -# CONFIG_NET_POCKET is not set - -# -# Ethernet (1000 Mbit) -# -# CONFIG_ACENIC is not set -# CONFIG_DL2K is not set -CONFIG_E1000=y -# CONFIG_E1000_NAPI is not set -# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set -# CONFIG_NS83820 is not set -# CONFIG_HAMACHI is not set -# CONFIG_YELLOWFIN is not set -# CONFIG_R8169 is not set -# CONFIG_SK98LIN is not set -# CONFIG_TIGON3 is not set - -# -# Ethernet (10000 Mbit) -# -# CONFIG_IXGB is not set -# CONFIG_S2IO is not set - -# -# Token Ring devices -# -# CONFIG_TR is not set - -# -# Wireless LAN (non-hamradio) -# -# CONFIG_NET_RADIO is not set - -# -# Wan interfaces -# -# CONFIG_WAN is not set -# CONFIG_FDDI is not set -# CONFIG_HIPPI is not set -# CONFIG_PLIP is not set -# CONFIG_PPP is not set -# CONFIG_SLIP is not set -# CONFIG_NET_FC is not set -# CONFIG_RCPCI is not set -# CONFIG_SHAPER is not set -# CONFIG_NETCONSOLE is not set - -# -# ISDN subsystem -# -# CONFIG_ISDN is not set - -# -# Telephony Support -# -# CONFIG_PHONE is not set - -# -# Input device support -# -CONFIG_INPUT=y - -# -# Userland interfaces -# -CONFIG_INPUT_MOUSEDEV=y -CONFIG_INPUT_MOUSEDEV_PSAUX=y -CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 -# CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set -CONFIG_INPUT_EVDEV=y -# CONFIG_INPUT_EVBUG is not set - -# -# Input I/O drivers -# -CONFIG_GAMEPORT=m -CONFIG_SOUND_GAMEPORT=m -# CONFIG_GAMEPORT_NS558 is not set -# CONFIG_GAMEPORT_L4 is not set -# CONFIG_GAMEPORT_EMU10K1 is not set -# CONFIG_GAMEPORT_VORTEX is not set -# CONFIG_GAMEPORT_FM801 is not set -# CONFIG_GAMEPORT_CS461x is not set -CONFIG_SERIO=y -CONFIG_SERIO_I8042=y -CONFIG_SERIO_SERPORT=y -# CONFIG_SERIO_CT82C710 is not set -# CONFIG_SERIO_PARKBD is not set -# CONFIG_SERIO_PCIPS2 is not set - -# -# Input Device Drivers -# -CONFIG_INPUT_KEYBOARD=y -CONFIG_KEYBOARD_ATKBD=y -# CONFIG_KEYBOARD_SUNKBD is not set -# CONFIG_KEYBOARD_LKKBD is not set -# CONFIG_KEYBOARD_XTKBD is not set -# CONFIG_KEYBOARD_NEWTON is not set -CONFIG_INPUT_MOUSE=y -CONFIG_MOUSE_PS2=y -# CONFIG_MOUSE_SERIAL is not set -# CONFIG_MOUSE_INPORT is not set -# CONFIG_MOUSE_LOGIBM is not set -# CONFIG_MOUSE_PC110PAD is not set -# CONFIG_MOUSE_VSXXXAA is not set -# CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TOUCHSCREEN is not set -CONFIG_INPUT_MISC=y -CONFIG_INPUT_UINPUT=y - -# -# Character devices -# -CONFIG_VT=y -CONFIG_VT_CONSOLE=y -CONFIG_HW_CONSOLE=y -# CONFIG_SERIAL_NONSTANDARD is not set - -# -# Serial drivers -# -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_NR_UARTS=4 -# CONFIG_SERIAL_8250_EXTENDED is not set - -# -# Non-8250 serial port support -# -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -# CONFIG_SERIAL_PMACZILOG is not set -CONFIG_UNIX98_PTYS=y -CONFIG_LEGACY_PTYS=y -CONFIG_LEGACY_PTY_COUNT=256 -CONFIG_PRINTER=m -# CONFIG_LP_CONSOLE is not set -# CONFIG_PPDEV is not set -# CONFIG_TIPAR is not set -# CONFIG_QIC02_TAPE is not set - -# -# IPMI -# -# CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -# CONFIG_WATCHDOG is not set -CONFIG_NVRAM=y -CONFIG_GEN_RTC=y -# CONFIG_GEN_RTC_X is not set -# CONFIG_DTLK is not set -# CONFIG_R3964 is not set -# CONFIG_APPLICOM is not set - -# -# Ftape, the floppy tape device driver -# -# CONFIG_AGP is not set -# CONFIG_DRM is not set -# CONFIG_RAW_DRIVER is not set - -# -# I2C support -# -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=y - -# -# I2C Algorithms -# -CONFIG_I2C_ALGOBIT=y -CONFIG_I2C_ALGOPCF=y - -# -# I2C Hardware Bus support -# -# CONFIG_I2C_ALI1535 is not set -# CONFIG_I2C_ALI1563 is not set -# CONFIG_I2C_ALI15X3 is not set -# CONFIG_I2C_AMD756 is not set -# CONFIG_I2C_AMD8111 is not set -# CONFIG_I2C_HYDRA is not set -# CONFIG_I2C_I801 is not set -# CONFIG_I2C_I810 is not set -# CONFIG_I2C_ISA is not set -# CONFIG_I2C_KEYWEST is not set -# CONFIG_I2C_NFORCE2 is not set -# CONFIG_I2C_PARPORT is not set -# CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_PIIX4 is not set -# CONFIG_I2C_PROSAVAGE is not set -# CONFIG_I2C_SAVAGE4 is not set -# CONFIG_SCx200_ACB is not set -# CONFIG_I2C_SIS5595 is not set -# CONFIG_I2C_SIS630 is not set -# CONFIG_I2C_SIS96X is not set -# CONFIG_I2C_VIA is not set -# CONFIG_I2C_VIAPRO is not set -# CONFIG_I2C_VOODOO3 is not set - -# -# Hardware Sensors Chip support -# -# CONFIG_I2C_SENSOR is not set -# CONFIG_SENSORS_ADM1021 is not set -# CONFIG_SENSORS_ASB100 is not set -# CONFIG_SENSORS_DS1621 is not set -# CONFIG_SENSORS_FSCHER is not set -# CONFIG_SENSORS_GL518SM is not set -# CONFIG_SENSORS_IT87 is not set -# CONFIG_SENSORS_LM75 is not set -# CONFIG_SENSORS_LM78 is not set -# CONFIG_SENSORS_LM80 is not set -# CONFIG_SENSORS_LM83 is not set -# CONFIG_SENSORS_LM85 is not set -# CONFIG_SENSORS_LM90 is not set -# CONFIG_SENSORS_VIA686A is not set -# CONFIG_SENSORS_W83781D is not set -# CONFIG_SENSORS_W83L785TS is not set -# CONFIG_SENSORS_W83627HF is not set - -# -# Other I2C Chip support -# -# CONFIG_SENSORS_EEPROM is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_SENSORS_PCF8591 is not set -# CONFIG_I2C_DEBUG_CORE is not set -# CONFIG_I2C_DEBUG_ALGO is not set -# CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_I2C_DEBUG_CHIP is not set - -# -# Misc devices -# - -# -# Multimedia devices -# -# CONFIG_VIDEO_DEV is not set - -# -# Digital Video Broadcasting Devices -# -# CONFIG_DVB is not set - -# -# Graphics support -# -CONFIG_FB=y -# CONFIG_FB_PM2 is not set -# CONFIG_FB_CYBER2000 is not set -CONFIG_FB_OF=y -# CONFIG_FB_CONTROL is not set -# CONFIG_FB_PLATINUM is not set -# CONFIG_FB_VALKYRIE is not set -# CONFIG_FB_CT65550 is not set -# CONFIG_FB_IMSTT is not set -# CONFIG_FB_S3TRIO is not set -# CONFIG_FB_VGA16 is not set -# CONFIG_FB_RIVA is not set -CONFIG_FB_MATROX=y -CONFIG_FB_MATROX_MILLENIUM=y -CONFIG_FB_MATROX_MYSTIQUE=y -# CONFIG_FB_MATROX_G450 is not set -CONFIG_FB_MATROX_G100A=y -CONFIG_FB_MATROX_G100=y -CONFIG_FB_MATROX_I2C=y -# CONFIG_FB_MATROX_MAVEN is not set -CONFIG_FB_MATROX_MULTIHEAD=y -# CONFIG_FB_RADEON_OLD is not set -# CONFIG_FB_RADEON is not set -# CONFIG_FB_ATY128 is not set -# CONFIG_FB_ATY is not set -# CONFIG_FB_SIS is not set -# CONFIG_FB_NEOMAGIC is not set -# CONFIG_FB_KYRO is not set -# CONFIG_FB_3DFX is not set -# CONFIG_FB_VOODOO1 is not set -# CONFIG_FB_TRIDENT is not set -# CONFIG_FB_VIRTUAL is not set - -# -# Console display driver support -# -# CONFIG_VGA_CONSOLE is not set -# CONFIG_MDA_CONSOLE is not set -CONFIG_DUMMY_CONSOLE=y -CONFIG_FRAMEBUFFER_CONSOLE=y -CONFIG_PCI_CONSOLE=y -# CONFIG_FONTS is not set -CONFIG_FONT_8x8=y -CONFIG_FONT_8x16=y - -# -# Logo configuration -# -CONFIG_LOGO=y -CONFIG_LOGO_LINUX_MONO=y -CONFIG_LOGO_LINUX_VGA16=y -CONFIG_LOGO_LINUX_CLUT224=y - -# -# Sound -# -CONFIG_SOUND=y -# CONFIG_DMASOUND_PMAC is not set - -# -# Advanced Linux Sound Architecture -# -CONFIG_SND=m -CONFIG_SND_TIMER=m -CONFIG_SND_PCM=m -CONFIG_SND_HWDEP=m -CONFIG_SND_RAWMIDI=m -CONFIG_SND_SEQUENCER=m -CONFIG_SND_SEQ_DUMMY=m -CONFIG_SND_OSSEMUL=y -CONFIG_SND_MIXER_OSS=m -CONFIG_SND_PCM_OSS=m -CONFIG_SND_SEQUENCER_OSS=y -# CONFIG_SND_VERBOSE_PRINTK is not set -# CONFIG_SND_DEBUG is not set - -# -# Generic devices -# -CONFIG_SND_MPU401_UART=m -CONFIG_SND_OPL3_LIB=m -CONFIG_SND_DUMMY=m -# CONFIG_SND_VIRMIDI is not set -# CONFIG_SND_MTPAV is not set -# CONFIG_SND_SERIAL_U16550 is not set -# CONFIG_SND_MPU401 is not set - -# -# ISA devices -# -# CONFIG_SND_AD1848 is not set -# CONFIG_SND_CS4231 is not set -CONFIG_SND_CS4232=m -# CONFIG_SND_CS4236 is not set -# CONFIG_SND_ES1688 is not set -# CONFIG_SND_ES18XX is not set -# CONFIG_SND_GUSCLASSIC is not set -# CONFIG_SND_GUSEXTREME is not set -# CONFIG_SND_GUSMAX is not set -# CONFIG_SND_INTERWAVE is not set -# CONFIG_SND_INTERWAVE_STB is not set -# CONFIG_SND_OPTI92X_AD1848 is not set -# CONFIG_SND_OPTI92X_CS4231 is not set -# CONFIG_SND_OPTI93X is not set -# CONFIG_SND_SB8 is not set -# CONFIG_SND_SB16 is not set -# CONFIG_SND_SBAWE is not set -# CONFIG_SND_WAVEFRONT is not set -# CONFIG_SND_CMI8330 is not set -# CONFIG_SND_OPL3SA2 is not set -# CONFIG_SND_SGALAXY is not set -# CONFIG_SND_SSCAPE is not set - -# -# PCI devices -# -CONFIG_SND_AC97_CODEC=m -# CONFIG_SND_ALI5451 is not set -# CONFIG_SND_ATIIXP is not set -# CONFIG_SND_AU8810 is not set -# CONFIG_SND_AU8820 is not set -# CONFIG_SND_AU8830 is not set -# CONFIG_SND_AZT3328 is not set -# CONFIG_SND_BT87X is not set -CONFIG_SND_CS46XX=m -# CONFIG_SND_CS46XX_NEW_DSP is not set -CONFIG_SND_CS4281=m -# CONFIG_SND_EMU10K1 is not set -# CONFIG_SND_KORG1212 is not set -# CONFIG_SND_MIXART is not set -# CONFIG_SND_NM256 is not set -# CONFIG_SND_RME32 is not set -# CONFIG_SND_RME96 is not set -# CONFIG_SND_RME9652 is not set -# CONFIG_SND_HDSP is not set -# CONFIG_SND_TRIDENT is not set -# CONFIG_SND_YMFPCI is not set -# CONFIG_SND_ALS4000 is not set -# CONFIG_SND_CMIPCI is not set -# CONFIG_SND_ENS1370 is not set -# CONFIG_SND_ENS1371 is not set -# CONFIG_SND_ES1938 is not set -# CONFIG_SND_ES1968 is not set -# CONFIG_SND_MAESTRO3 is not set -# CONFIG_SND_FM801 is not set -# CONFIG_SND_ICE1712 is not set -# CONFIG_SND_ICE1724 is not set -# CONFIG_SND_INTEL8X0 is not set -# CONFIG_SND_INTEL8X0M is not set -# CONFIG_SND_SONICVIBES is not set -# CONFIG_SND_VIA82XX is not set -# CONFIG_SND_VX222 is not set - -# -# ALSA PowerMac devices -# -# CONFIG_SND_POWERMAC is not set - -# -# Open Sound System -# -# CONFIG_SOUND_PRIME is not set - -# -# USB support -# -# CONFIG_USB is not set - -# -# USB Gadget Support -# -# CONFIG_USB_GADGET is not set - -# -# File systems -# -CONFIG_EXT2_FS=y -# CONFIG_EXT2_FS_XATTR is not set -# CONFIG_EXT3_FS is not set -# CONFIG_JBD is not set -# CONFIG_REISERFS_FS is not set -# CONFIG_JFS_FS is not set -# CONFIG_XFS_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set -# CONFIG_QUOTA is not set -# CONFIG_AUTOFS_FS is not set -# CONFIG_AUTOFS4_FS is not set - -# -# CD-ROM/DVD Filesystems -# -CONFIG_ISO9660_FS=y -CONFIG_JOLIET=y -# CONFIG_ZISOFS is not set -# CONFIG_UDF_FS is not set - -# -# DOS/FAT/NT Filesystems -# -CONFIG_FAT_FS=y -CONFIG_MSDOS_FS=y -CONFIG_VFAT_FS=y -# CONFIG_NTFS_FS is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -CONFIG_PROC_KCORE=y -CONFIG_SYSFS=y -# CONFIG_DEVFS_FS is not set -# CONFIG_DEVPTS_FS_XATTR is not set -CONFIG_TMPFS=y -# CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y - -# -# Miscellaneous filesystems -# -# CONFIG_ADFS_FS is not set -# CONFIG_AFFS_FS is not set -# CONFIG_HFS_FS is not set -# CONFIG_HFSPLUS_FS is not set -# CONFIG_BEFS_FS is not set -# CONFIG_BFS_FS is not set -# CONFIG_EFS_FS is not set -# CONFIG_CRAMFS is not set -# CONFIG_VXFS_FS is not set -# CONFIG_HPFS_FS is not set -# CONFIG_QNX4FS_FS is not set -# CONFIG_SYSV_FS is not set -# CONFIG_UFS_FS is not set - -# -# Network File Systems -# -CONFIG_NFS_FS=y -# CONFIG_NFS_V3 is not set -# CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set -CONFIG_NFSD=y -# CONFIG_NFSD_V3 is not set -# CONFIG_NFSD_TCP is not set -CONFIG_LOCKD=y -CONFIG_EXPORTFS=y -CONFIG_SUNRPC=y -# CONFIG_RPCSEC_GSS_KRB5 is not set -# CONFIG_SMB_FS is not set -# CONFIG_CIFS is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_AFS_FS is not set - -# -# Partition Types -# -# CONFIG_PARTITION_ADVANCED is not set -CONFIG_MSDOS_PARTITION=y - -# -# Native Language Support -# -CONFIG_NLS=y -CONFIG_NLS_DEFAULT="iso8859-1" -CONFIG_NLS_CODEPAGE_437=y -# CONFIG_NLS_CODEPAGE_737 is not set -# CONFIG_NLS_CODEPAGE_775 is not set -# CONFIG_NLS_CODEPAGE_850 is not set -# CONFIG_NLS_CODEPAGE_852 is not set -# CONFIG_NLS_CODEPAGE_855 is not set -# CONFIG_NLS_CODEPAGE_857 is not set -# CONFIG_NLS_CODEPAGE_860 is not set -# CONFIG_NLS_CODEPAGE_861 is not set -# CONFIG_NLS_CODEPAGE_862 is not set -# CONFIG_NLS_CODEPAGE_863 is not set -# CONFIG_NLS_CODEPAGE_864 is not set -# CONFIG_NLS_CODEPAGE_865 is not set -# CONFIG_NLS_CODEPAGE_866 is not set -# CONFIG_NLS_CODEPAGE_869 is not set -# CONFIG_NLS_CODEPAGE_936 is not set -# CONFIG_NLS_CODEPAGE_950 is not set -# CONFIG_NLS_CODEPAGE_932 is not set -# CONFIG_NLS_CODEPAGE_949 is not set -# CONFIG_NLS_CODEPAGE_874 is not set -# CONFIG_NLS_ISO8859_8 is not set -# CONFIG_NLS_CODEPAGE_1250 is not set -# CONFIG_NLS_CODEPAGE_1251 is not set -CONFIG_NLS_ISO8859_1=y -# CONFIG_NLS_ISO8859_2 is not set -# CONFIG_NLS_ISO8859_3 is not set -# CONFIG_NLS_ISO8859_4 is not set -# CONFIG_NLS_ISO8859_5 is not set -# CONFIG_NLS_ISO8859_6 is not set -# CONFIG_NLS_ISO8859_7 is not set -# CONFIG_NLS_ISO8859_9 is not set -# CONFIG_NLS_ISO8859_13 is not set -# CONFIG_NLS_ISO8859_14 is not set -# CONFIG_NLS_ISO8859_15 is not set -# CONFIG_NLS_KOI8_R is not set -# CONFIG_NLS_KOI8_U is not set -# CONFIG_NLS_UTF8 is not set - -# -# Library routines -# -CONFIG_CRC32=y -# CONFIG_LIBCRC32C is not set -CONFIG_ZLIB_INFLATE=m -CONFIG_ZLIB_DEFLATE=m - -# -# Kernel hacking -# -# CONFIG_DEBUG_KERNEL is not set -CONFIG_BOOTX_TEXT=y - -# -# Security options -# -# CONFIG_SECURITY is not set - -# -# Cryptographic options -# -CONFIG_CRYPTO=y -CONFIG_CRYPTO_HMAC=y -CONFIG_CRYPTO_NULL=y -CONFIG_CRYPTO_MD4=m -CONFIG_CRYPTO_MD5=m -CONFIG_CRYPTO_SHA1=m -CONFIG_CRYPTO_SHA256=m -CONFIG_CRYPTO_SHA512=m -CONFIG_CRYPTO_DES=m -CONFIG_CRYPTO_BLOWFISH=m -CONFIG_CRYPTO_TWOFISH=m -# CONFIG_CRYPTO_SERPENT is not set -CONFIG_CRYPTO_AES=m -CONFIG_CRYPTO_CAST5=m -CONFIG_CRYPTO_CAST6=m -CONFIG_CRYPTO_ARC4=m -CONFIG_CRYPTO_DEFLATE=m -CONFIG_CRYPTO_MICHAEL_MIC=m -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_TEST is not set diff --git a/arch/ppc/configs/common_defconfig b/arch/ppc/configs/prep_defconfig index 4d33bee23a8..4d33bee23a8 100644 --- a/arch/ppc/configs/common_defconfig +++ b/arch/ppc/configs/prep_defconfig diff --git a/arch/ppc/kernel/entry.S b/arch/ppc/kernel/entry.S index fa8d49789ef..5891ecbdc70 100644 --- a/arch/ppc/kernel/entry.S +++ b/arch/ppc/kernel/entry.S @@ -930,55 +930,3 @@ END_FTR_SECTION_IFSET(CPU_FTR_601) b 4b .comm ee_restarts,4 - -/* - * PROM code for specific machines follows. Put it - * here so it's easy to add arch-specific sections later. - * -- Cort - */ -#ifdef CONFIG_PPC_OF -/* - * On CHRP, the Run-Time Abstraction Services (RTAS) have to be - * called with the MMU off. - */ -_GLOBAL(enter_rtas) - stwu r1,-INT_FRAME_SIZE(r1) - mflr r0 - stw r0,INT_FRAME_SIZE+4(r1) - lis r4,rtas_data@ha - lwz r4,rtas_data@l(r4) - lis r6,1f@ha /* physical return address for rtas */ - addi r6,r6,1f@l - tophys(r6,r6) - tophys(r7,r1) - lis r8,rtas_entry@ha - lwz r8,rtas_entry@l(r8) - mfmsr r9 - stw r9,8(r1) - LOAD_MSR_KERNEL(r0,MSR_KERNEL) - SYNC /* disable interrupts so SRR0/1 */ - MTMSRD(r0) /* don't get trashed */ - li r9,MSR_KERNEL & ~(MSR_IR|MSR_DR) - mtlr r6 - CLR_TOP32(r7) - mtspr SPRN_SPRG2,r7 - mtspr SPRN_SRR0,r8 - mtspr SPRN_SRR1,r9 - RFI -1: tophys(r9,r1) - lwz r8,INT_FRAME_SIZE+4(r9) /* get return address */ - lwz r9,8(r9) /* original msr value */ - FIX_SRR1(r9,r0) - addi r1,r1,INT_FRAME_SIZE - li r0,0 - mtspr SPRN_SPRG2,r0 - mtspr SPRN_SRR0,r8 - mtspr SPRN_SRR1,r9 - RFI /* return to caller */ - - .globl machine_check_in_rtas -machine_check_in_rtas: - twi 31,0,0 - /* XXX load up BATs and panic */ - -#endif /* CONFIG_PPC_OF */ diff --git a/arch/ppc/kernel/head.S b/arch/ppc/kernel/head.S index 53ea845fb91..01303efedda 100644 --- a/arch/ppc/kernel/head.S +++ b/arch/ppc/kernel/head.S @@ -37,19 +37,6 @@ #include <asm/amigappc.h> #endif -#ifdef CONFIG_PPC64BRIDGE -#define LOAD_BAT(n, reg, RA, RB) \ - ld RA,(n*32)+0(reg); \ - ld RB,(n*32)+8(reg); \ - mtspr SPRN_IBAT##n##U,RA; \ - mtspr SPRN_IBAT##n##L,RB; \ - ld RA,(n*32)+16(reg); \ - ld RB,(n*32)+24(reg); \ - mtspr SPRN_DBAT##n##U,RA; \ - mtspr SPRN_DBAT##n##L,RB; \ - -#else /* CONFIG_PPC64BRIDGE */ - /* 601 only have IBAT; cr0.eq is set on 601 when using this macro */ #define LOAD_BAT(n, reg, RA, RB) \ /* see the comment for clear_bats() -- Cort */ \ @@ -66,7 +53,6 @@ mtspr SPRN_DBAT##n##U,RA; \ mtspr SPRN_DBAT##n##L,RB; \ 1: -#endif /* CONFIG_PPC64BRIDGE */ .text .stabs "arch/ppc/kernel/",N_SO,0,0,0f @@ -129,11 +115,6 @@ _start: .globl __start __start: -/* - * We have to do any OF calls before we map ourselves to KERNELBASE, - * because OF may have I/O devices mapped into that area - * (particularly on CHRP). - */ mr r31,r3 /* save parameters */ mr r30,r4 mr r29,r5 @@ -148,14 +129,6 @@ __start: */ bl early_init -/* - * On POWER4, we first need to tweak some CPU configuration registers - * like real mode cache inhibit or exception base - */ -#ifdef CONFIG_POWER4 - bl __970_cpu_preinit -#endif /* CONFIG_POWER4 */ - #ifdef CONFIG_APUS /* On APUS the __va/__pa constants need to be set to the correct * values before continuing. @@ -169,7 +142,6 @@ __start: */ bl mmu_off __after_mmu_off: -#ifndef CONFIG_POWER4 bl clear_bats bl flush_tlbs @@ -177,10 +149,6 @@ __after_mmu_off: #if !defined(CONFIG_APUS) && defined(CONFIG_BOOTX_TEXT) bl setup_disp_bat #endif -#else /* CONFIG_POWER4 */ - bl reloc_offset - bl initial_mm_power4 -#endif /* CONFIG_POWER4 */ /* * Call setup_cpu for CPU 0 and initialize 6xx Idle @@ -192,18 +160,11 @@ __after_mmu_off: bl reloc_offset bl init_idle_6xx #endif /* CONFIG_6xx */ -#ifdef CONFIG_POWER4 - bl reloc_offset - bl init_idle_power4 -#endif /* CONFIG_POWER4 */ #ifndef CONFIG_APUS /* * We need to run with _start at physical address 0. - * On CHRP, we are loaded at 0x10000 since OF on CHRP uses - * the exception vectors at 0 (and therefore this copy - * overwrites OF's exception vectors with our own). * If the MMU is already turned on, we copy stuff to KERNELBASE, * otherwise we copy it to 0. */ @@ -358,51 +319,19 @@ i##n: \ #endif /* Machine check */ -/* - * On CHRP, this is complicated by the fact that we could get a - * machine check inside RTAS, and we have no guarantee that certain - * critical registers will have the values we expect. The set of - * registers that might have bad values includes all the GPRs - * and all the BATs. We indicate that we are in RTAS by putting - * a non-zero value, the address of the exception frame to use, - * in SPRG2. The machine check handler checks SPRG2 and uses its - * value if it is non-zero. If we ever needed to free up SPRG2, - * we could use a field in the thread_info or thread_struct instead. - * (Other exception handlers assume that r1 is a valid kernel stack - * pointer when we take an exception from supervisor mode.) - * -- paulus. - */ . = 0x200 mtspr SPRN_SPRG0,r10 mtspr SPRN_SPRG1,r11 mfcr r10 -#ifdef CONFIG_PPC_CHRP - mfspr r11,SPRN_SPRG2 - cmpwi 0,r11,0 - bne 7f -#endif /* CONFIG_PPC_CHRP */ EXCEPTION_PROLOG_1 7: EXCEPTION_PROLOG_2 addi r3,r1,STACK_FRAME_OVERHEAD -#ifdef CONFIG_PPC_CHRP - mfspr r4,SPRN_SPRG2 - cmpwi cr1,r4,0 - bne cr1,1f -#endif EXC_XFER_STD(0x200, machine_check_exception) -#ifdef CONFIG_PPC_CHRP -1: b machine_check_in_rtas -#endif /* Data access exception. */ . = 0x300 -#ifdef CONFIG_PPC64BRIDGE - b DataAccess -DataAccessCont: -#else DataAccess: EXCEPTION_PROLOG -#endif /* CONFIG_PPC64BRIDGE */ mfspr r10,SPRN_DSISR andis. r0,r10,0xa470 /* weird error? */ bne 1f /* if not, try to put a PTE */ @@ -414,21 +343,10 @@ DataAccess: mfspr r4,SPRN_DAR EXC_XFER_EE_LITE(0x300, handle_page_fault) -#ifdef CONFIG_PPC64BRIDGE -/* SLB fault on data access. */ - . = 0x380 - b DataSegment -#endif /* CONFIG_PPC64BRIDGE */ - /* Instruction access exception. */ . = 0x400 -#ifdef CONFIG_PPC64BRIDGE - b InstructionAccess -InstructionAccessCont: -#else InstructionAccess: EXCEPTION_PROLOG -#endif /* CONFIG_PPC64BRIDGE */ andis. r0,r9,0x4000 /* no pte found? */ beq 1f /* if so, try to put a PTE */ li r3,0 /* into the hash table */ @@ -438,12 +356,6 @@ InstructionAccess: mr r5,r9 EXC_XFER_EE_LITE(0x400, handle_page_fault) -#ifdef CONFIG_PPC64BRIDGE -/* SLB fault on instruction access. */ - . = 0x480 - b InstructionSegment -#endif /* CONFIG_PPC64BRIDGE */ - /* External interrupt */ EXCEPTION(0x500, HardwareInterrupt, do_IRQ, EXC_XFER_LITE) @@ -708,15 +620,9 @@ DataStoreTLBMiss: EXCEPTION(0x1300, Trap_13, instruction_breakpoint_exception, EXC_XFER_EE) EXCEPTION(0x1400, SMI, SMIException, EXC_XFER_EE) EXCEPTION(0x1500, Trap_15, unknown_exception, EXC_XFER_EE) -#ifdef CONFIG_POWER4 - EXCEPTION(0x1600, Trap_16, unknown_exception, EXC_XFER_EE) - EXCEPTION(0x1700, Trap_17, altivec_assist_exception, EXC_XFER_EE) - EXCEPTION(0x1800, Trap_18, TAUException, EXC_XFER_STD) -#else /* !CONFIG_POWER4 */ EXCEPTION(0x1600, Trap_16, altivec_assist_exception, EXC_XFER_EE) EXCEPTION(0x1700, Trap_17, TAUException, EXC_XFER_STD) EXCEPTION(0x1800, Trap_18, unknown_exception, EXC_XFER_EE) -#endif /* CONFIG_POWER4 */ EXCEPTION(0x1900, Trap_19, unknown_exception, EXC_XFER_EE) EXCEPTION(0x1a00, Trap_1a, unknown_exception, EXC_XFER_EE) EXCEPTION(0x1b00, Trap_1b, unknown_exception, EXC_XFER_EE) @@ -754,28 +660,6 @@ AltiVecUnavailable: addi r3,r1,STACK_FRAME_OVERHEAD EXC_XFER_EE_LITE(0xf20, altivec_unavailable_exception) -#ifdef CONFIG_PPC64BRIDGE -DataAccess: - EXCEPTION_PROLOG - b DataAccessCont - -InstructionAccess: - EXCEPTION_PROLOG - b InstructionAccessCont - -DataSegment: - EXCEPTION_PROLOG - addi r3,r1,STACK_FRAME_OVERHEAD - mfspr r4,SPRN_DAR - stw r4,_DAR(r11) - EXC_XFER_STD(0x380, unknown_exception) - -InstructionSegment: - EXCEPTION_PROLOG - addi r3,r1,STACK_FRAME_OVERHEAD - EXC_XFER_STD(0x480, unknown_exception) -#endif /* CONFIG_PPC64BRIDGE */ - #ifdef CONFIG_ALTIVEC /* Note that the AltiVec support is closely modeled after the FP * support. Changes to one are likely to be applicable to the @@ -1048,13 +932,6 @@ __secondary_start_pmac_0: .globl __secondary_start __secondary_start: -#ifdef CONFIG_PPC64BRIDGE - mfmsr r0 - clrldi r0,r0,1 /* make sure it's in 32-bit mode */ - SYNC - MTMSRD(r0) - isync -#endif /* Copy some CPU settings from CPU 0 */ bl __restore_cpu_setup @@ -1065,10 +942,6 @@ __secondary_start: lis r3,-KERNELBASE@h bl init_idle_6xx #endif /* CONFIG_6xx */ -#ifdef CONFIG_POWER4 - lis r3,-KERNELBASE@h - bl init_idle_power4 -#endif /* CONFIG_POWER4 */ /* get current_thread_info and current */ lis r1,secondary_ti@ha @@ -1109,12 +982,12 @@ __secondary_start: * Those generic dummy functions are kept for CPUs not * included in CONFIG_6xx */ -#if !defined(CONFIG_6xx) && !defined(CONFIG_POWER4) +#if !defined(CONFIG_6xx) _GLOBAL(__save_cpu_setup) blr _GLOBAL(__restore_cpu_setup) blr -#endif /* !defined(CONFIG_6xx) && !defined(CONFIG_POWER4) */ +#endif /* !defined(CONFIG_6xx) */ /* @@ -1132,11 +1005,6 @@ load_up_mmu: tophys(r6,r6) lwz r6,_SDR1@l(r6) mtspr SPRN_SDR1,r6 -#ifdef CONFIG_PPC64BRIDGE - /* clear the ASR so we only use the pseudo-segment registers. */ - li r6,0 - mtasr r6 -#endif /* CONFIG_PPC64BRIDGE */ li r0,16 /* load up segment register values */ mtctr r0 /* for context 0 */ lis r3,0x2000 /* Ku = 1, VSID = 0 */ @@ -1145,7 +1013,7 @@ load_up_mmu: addi r3,r3,0x111 /* increment VSID */ addis r4,r4,0x1000 /* address of next segment */ bdnz 3b -#ifndef CONFIG_POWER4 + /* Load the BAT registers with the values set up by MMU_init. MMU_init takes care of whether we're on a 601 or not. */ mfpvr r3 @@ -1158,7 +1026,7 @@ load_up_mmu: LOAD_BAT(1,r3,r4,r5) LOAD_BAT(2,r3,r4,r5) LOAD_BAT(3,r3,r4,r5) -#endif /* CONFIG_POWER4 */ + blr /* @@ -1269,9 +1137,6 @@ _GLOBAL(set_context) li r4,0 isync 3: -#ifdef CONFIG_PPC64BRIDGE - slbie r4 -#endif /* CONFIG_PPC64BRIDGE */ mtsrin r3,r4 addi r3,r3,0x111 /* next VSID */ rlwinm r3,r3,0,8,3 /* clear out any overflow from VSID field */ @@ -1358,7 +1223,6 @@ mmu_off: sync RFI -#ifndef CONFIG_POWER4 /* * Use the first pair of BAT registers to map the 1st 16MB * of RAM to KERNELBASE. From this point on we can't safely @@ -1366,7 +1230,6 @@ mmu_off: */ initial_bats: lis r11,KERNELBASE@h -#ifndef CONFIG_PPC64BRIDGE mfspr r9,SPRN_PVR rlwinm r9,r9,16,16,31 /* r9 = 1 for 601, 4 for 604 */ cmpwi 0,r9,1 @@ -1381,7 +1244,6 @@ initial_bats: mtspr SPRN_IBAT1L,r10 isync blr -#endif /* CONFIG_PPC64BRIDGE */ 4: tophys(r8,r11) #ifdef CONFIG_SMP @@ -1395,11 +1257,6 @@ initial_bats: ori r11,r11,BL_256M<<2|0x2 /* set up BAT registers for 604 */ #endif /* CONFIG_APUS */ -#ifdef CONFIG_PPC64BRIDGE - /* clear out the high 32 bits in the BAT */ - clrldi r11,r11,32 - clrldi r8,r8,32 -#endif /* CONFIG_PPC64BRIDGE */ mtspr SPRN_DBAT0L,r8 /* N.B. 6xx (not 601) have valid */ mtspr SPRN_DBAT0U,r11 /* bit in upper BAT register */ mtspr SPRN_IBAT0L,r8 @@ -1432,38 +1289,6 @@ setup_disp_bat: #endif /* !defined(CONFIG_APUS) && defined(CONFIG_BOOTX_TEXT) */ -#else /* CONFIG_POWER4 */ -/* - * Load up the SDR1 and segment register values now - * since we don't have the BATs. - * Also make sure we are running in 32-bit mode. - */ - -initial_mm_power4: - addis r14,r3,_SDR1@ha /* get the value from _SDR1 */ - lwz r14,_SDR1@l(r14) /* assume hash table below 4GB */ - mtspr SPRN_SDR1,r14 - slbia - lis r4,0x2000 /* set pseudo-segment reg 12 */ - ori r5,r4,0x0ccc - mtsr 12,r5 -#if 0 - ori r5,r4,0x0888 /* set pseudo-segment reg 8 */ - mtsr 8,r5 /* (for access to serial port) */ -#endif -#ifdef CONFIG_BOOTX_TEXT - ori r5,r4,0x0999 /* set pseudo-segment reg 9 */ - mtsr 9,r5 /* (for access to screen) */ -#endif - mfmsr r0 - clrldi r0,r0,1 - sync - mtmsr r0 - isync - blr - -#endif /* CONFIG_POWER4 */ - #ifdef CONFIG_8260 /* Jump into the system reset for the rom. * We first disable the MMU, and then jump to the ROM reset address. diff --git a/arch/ppc/kernel/pci.c b/arch/ppc/kernel/pci.c index 04d04c5bfdd..809673a36f7 100644 --- a/arch/ppc/kernel/pci.c +++ b/arch/ppc/kernel/pci.c @@ -46,9 +46,6 @@ static void pcibios_fixup_resources(struct pci_dev* dev); static void fixup_broken_pcnet32(struct pci_dev* dev); static int reparent_resources(struct resource *parent, struct resource *res); static void fixup_cpc710_pci64(struct pci_dev* dev); -#ifdef CONFIG_PPC_OF -static u8* pci_to_OF_bus_map; -#endif /* By default, we don't re-assign bus numbers. */ @@ -625,406 +622,13 @@ pcibios_alloc_controller(void) return hose; } -#ifdef CONFIG_PPC_OF -/* - * Functions below are used on OpenFirmware machines. - */ -static void -make_one_node_map(struct device_node* node, u8 pci_bus) -{ - int *bus_range; - int len; - - if (pci_bus >= pci_bus_count) - return; - bus_range = (int *) get_property(node, "bus-range", &len); - if (bus_range == NULL || len < 2 * sizeof(int)) { - printk(KERN_WARNING "Can't get bus-range for %s, " - "assuming it starts at 0\n", node->full_name); - pci_to_OF_bus_map[pci_bus] = 0; - } else - pci_to_OF_bus_map[pci_bus] = bus_range[0]; - - for (node=node->child; node != 0;node = node->sibling) { - struct pci_dev* dev; - unsigned int *class_code, *reg; - - class_code = (unsigned int *) get_property(node, "class-code", NULL); - if (!class_code || ((*class_code >> 8) != PCI_CLASS_BRIDGE_PCI && - (*class_code >> 8) != PCI_CLASS_BRIDGE_CARDBUS)) - continue; - reg = (unsigned int *)get_property(node, "reg", NULL); - if (!reg) - continue; - dev = pci_find_slot(pci_bus, ((reg[0] >> 8) & 0xff)); - if (!dev || !dev->subordinate) - continue; - make_one_node_map(node, dev->subordinate->number); - } -} - -void -pcibios_make_OF_bus_map(void) -{ - int i; - struct pci_controller* hose; - u8* of_prop_map; - - pci_to_OF_bus_map = (u8*)kmalloc(pci_bus_count, GFP_KERNEL); - if (!pci_to_OF_bus_map) { - printk(KERN_ERR "Can't allocate OF bus map !\n"); - return; - } - - /* We fill the bus map with invalid values, that helps - * debugging. - */ - for (i=0; i<pci_bus_count; i++) - pci_to_OF_bus_map[i] = 0xff; - - /* For each hose, we begin searching bridges */ - for(hose=hose_head; hose; hose=hose->next) { - struct device_node* node; - node = (struct device_node *)hose->arch_data; - if (!node) - continue; - make_one_node_map(node, hose->first_busno); - } - of_prop_map = get_property(find_path_device("/"), "pci-OF-bus-map", NULL); - if (of_prop_map) - memcpy(of_prop_map, pci_to_OF_bus_map, pci_bus_count); -#ifdef DEBUG - printk("PCI->OF bus map:\n"); - for (i=0; i<pci_bus_count; i++) { - if (pci_to_OF_bus_map[i] == 0xff) - continue; - printk("%d -> %d\n", i, pci_to_OF_bus_map[i]); - } -#endif -} - -typedef int (*pci_OF_scan_iterator)(struct device_node* node, void* data); - -static struct device_node* -scan_OF_pci_childs(struct device_node* node, pci_OF_scan_iterator filter, void* data) -{ - struct device_node* sub_node; - - for (; node != 0;node = node->sibling) { - unsigned int *class_code; - - if (filter(node, data)) - return node; - - /* For PCI<->PCI bridges or CardBus bridges, we go down - * Note: some OFs create a parent node "multifunc-device" as - * a fake root for all functions of a multi-function device, - * we go down them as well. - */ - class_code = (unsigned int *) get_property(node, "class-code", NULL); - if ((!class_code || ((*class_code >> 8) != PCI_CLASS_BRIDGE_PCI && - (*class_code >> 8) != PCI_CLASS_BRIDGE_CARDBUS)) && - strcmp(node->name, "multifunc-device")) - continue; - sub_node = scan_OF_pci_childs(node->child, filter, data); - if (sub_node) - return sub_node; - } - return NULL; -} - -static int -scan_OF_pci_childs_iterator(struct device_node* node, void* data) -{ - unsigned int *reg; - u8* fdata = (u8*)data; - - reg = (unsigned int *) get_property(node, "reg", NULL); - if (reg && ((reg[0] >> 8) & 0xff) == fdata[1] - && ((reg[0] >> 16) & 0xff) == fdata[0]) - return 1; - return 0; -} - -static struct device_node* -scan_OF_childs_for_device(struct device_node* node, u8 bus, u8 dev_fn) -{ - u8 filter_data[2] = {bus, dev_fn}; - - return scan_OF_pci_childs(node, scan_OF_pci_childs_iterator, filter_data); -} - -/* - * Scans the OF tree for a device node matching a PCI device - */ -struct device_node * -pci_busdev_to_OF_node(struct pci_bus *bus, int devfn) -{ - struct pci_controller *hose; - struct device_node *node; - int busnr; - - if (!have_of) - return NULL; - - /* Lookup the hose */ - busnr = bus->number; - hose = pci_bus_to_hose(busnr); - if (!hose) - return NULL; - - /* Check it has an OF node associated */ - node = (struct device_node *) hose->arch_data; - if (!node) - return NULL; - - /* Fixup bus number according to what OF think it is. */ - if (pci_to_OF_bus_map) - busnr = pci_to_OF_bus_map[busnr]; - if (busnr == 0xff) - return NULL; - - /* Now, lookup childs of the hose */ - return scan_OF_childs_for_device(node->child, busnr, devfn); -} -EXPORT_SYMBOL(pci_busdev_to_OF_node); - -struct device_node* -pci_device_to_OF_node(struct pci_dev *dev) -{ - return pci_busdev_to_OF_node(dev->bus, dev->devfn); -} -EXPORT_SYMBOL(pci_device_to_OF_node); - -/* This routine is meant to be used early during boot, when the - * PCI bus numbers have not yet been assigned, and you need to - * issue PCI config cycles to an OF device. - * It could also be used to "fix" RTAS config cycles if you want - * to set pci_assign_all_buses to 1 and still use RTAS for PCI - * config cycles. - */ -struct pci_controller* pci_find_hose_for_OF_device(struct device_node* node) -{ - if (!have_of) - return NULL; - while(node) { - struct pci_controller* hose; - for (hose=hose_head;hose;hose=hose->next) - if (hose->arch_data == node) - return hose; - node=node->parent; - } - return NULL; -} - -static int -find_OF_pci_device_filter(struct device_node* node, void* data) -{ - return ((void *)node == data); -} - -/* - * Returns the PCI device matching a given OF node - */ -int -pci_device_from_OF_node(struct device_node* node, u8* bus, u8* devfn) -{ - unsigned int *reg; - struct pci_controller* hose; - struct pci_dev* dev = NULL; - - if (!have_of) - return -ENODEV; - /* Make sure it's really a PCI device */ - hose = pci_find_hose_for_OF_device(node); - if (!hose || !hose->arch_data) - return -ENODEV; - if (!scan_OF_pci_childs(((struct device_node*)hose->arch_data)->child, - find_OF_pci_device_filter, (void *)node)) - return -ENODEV; - reg = (unsigned int *) get_property(node, "reg", NULL); - if (!reg) - return -ENODEV; - *bus = (reg[0] >> 16) & 0xff; - *devfn = ((reg[0] >> 8) & 0xff); - - /* Ok, here we need some tweak. If we have already renumbered - * all busses, we can't rely on the OF bus number any more. - * the pci_to_OF_bus_map is not enough as several PCI busses - * may match the same OF bus number. - */ - if (!pci_to_OF_bus_map) - return 0; - - for_each_pci_dev(dev) - if (pci_to_OF_bus_map[dev->bus->number] == *bus && - dev->devfn == *devfn) { - *bus = dev->bus->number; - pci_dev_put(dev); - return 0; - } - - return -ENODEV; -} -EXPORT_SYMBOL(pci_device_from_OF_node); - -void __init -pci_process_bridge_OF_ranges(struct pci_controller *hose, - struct device_node *dev, int primary) -{ - static unsigned int static_lc_ranges[256] __initdata; - unsigned int *dt_ranges, *lc_ranges, *ranges, *prev; - unsigned int size; - int rlen = 0, orig_rlen; - int memno = 0; - struct resource *res; - int np, na = prom_n_addr_cells(dev); - np = na + 5; - - /* First we try to merge ranges to fix a problem with some pmacs - * that can have more than 3 ranges, fortunately using contiguous - * addresses -- BenH - */ - dt_ranges = (unsigned int *) get_property(dev, "ranges", &rlen); - if (!dt_ranges) - return; - /* Sanity check, though hopefully that never happens */ - if (rlen > sizeof(static_lc_ranges)) { - printk(KERN_WARNING "OF ranges property too large !\n"); - rlen = sizeof(static_lc_ranges); - } - lc_ranges = static_lc_ranges; - memcpy(lc_ranges, dt_ranges, rlen); - orig_rlen = rlen; - - /* Let's work on a copy of the "ranges" property instead of damaging - * the device-tree image in memory - */ - ranges = lc_ranges; - prev = NULL; - while ((rlen -= np * sizeof(unsigned int)) >= 0) { - if (prev) { - if (prev[0] == ranges[0] && prev[1] == ranges[1] && - (prev[2] + prev[na+4]) == ranges[2] && - (prev[na+2] + prev[na+4]) == ranges[na+2]) { - prev[na+4] += ranges[na+4]; - ranges[0] = 0; - ranges += np; - continue; - } - } - prev = ranges; - ranges += np; - } - - /* - * The ranges property is laid out as an array of elements, - * each of which comprises: - * cells 0 - 2: a PCI address - * cells 3 or 3+4: a CPU physical address - * (size depending on dev->n_addr_cells) - * cells 4+5 or 5+6: the size of the range - */ - ranges = lc_ranges; - rlen = orig_rlen; - while (ranges && (rlen -= np * sizeof(unsigned int)) >= 0) { - res = NULL; - size = ranges[na+4]; - switch ((ranges[0] >> 24) & 0x3) { - case 1: /* I/O space */ - if (ranges[2] != 0) - break; - hose->io_base_phys = ranges[na+2]; - /* limit I/O space to 16MB */ - if (size > 0x01000000) - size = 0x01000000; - hose->io_base_virt = ioremap(ranges[na+2], size); - if (primary) - isa_io_base = (unsigned long) hose->io_base_virt; - res = &hose->io_resource; - res->flags = IORESOURCE_IO; - res->start = ranges[2]; - DBG("PCI: IO 0x%lx -> 0x%lx\n", - res->start, res->start + size - 1); - break; - case 2: /* memory space */ - memno = 0; - if (ranges[1] == 0 && ranges[2] == 0 - && ranges[na+4] <= (16 << 20)) { - /* 1st 16MB, i.e. ISA memory area */ - if (primary) - isa_mem_base = ranges[na+2]; - memno = 1; - } - while (memno < 3 && hose->mem_resources[memno].flags) - ++memno; - if (memno == 0) - hose->pci_mem_offset = ranges[na+2] - ranges[2]; - if (memno < 3) { - res = &hose->mem_resources[memno]; - res->flags = IORESOURCE_MEM; - if(ranges[0] & 0x40000000) - res->flags |= IORESOURCE_PREFETCH; - res->start = ranges[na+2]; - DBG("PCI: MEM[%d] 0x%lx -> 0x%lx\n", memno, - res->start, res->start + size - 1); - } - break; - } - if (res != NULL) { - res->name = dev->full_name; - res->end = res->start + size - 1; - res->parent = NULL; - res->sibling = NULL; - res->child = NULL; - } - ranges += np; - } -} - -/* We create the "pci-OF-bus-map" property now so it appears in the - * /proc device tree - */ -void __init -pci_create_OF_bus_map(void) -{ - struct property* of_prop; - - of_prop = (struct property*) alloc_bootmem(sizeof(struct property) + 256); - if (of_prop && find_path_device("/")) { - memset(of_prop, -1, sizeof(struct property) + 256); - of_prop->name = "pci-OF-bus-map"; - of_prop->length = 256; - of_prop->value = (unsigned char *)&of_prop[1]; - prom_add_property(find_path_device("/"), of_prop); - } -} - -static ssize_t pci_show_devspec(struct device *dev, struct device_attribute *attr, char *buf) -{ - struct pci_dev *pdev; - struct device_node *np; - - pdev = to_pci_dev (dev); - np = pci_device_to_OF_node(pdev); - if (np == NULL || np->full_name == NULL) - return 0; - return sprintf(buf, "%s", np->full_name); -} -static DEVICE_ATTR(devspec, S_IRUGO, pci_show_devspec, NULL); - -#else /* CONFIG_PPC_OF */ void pcibios_make_OF_bus_map(void) { } -#endif /* CONFIG_PPC_OF */ /* Add sysfs properties */ void pcibios_add_platform_entries(struct pci_dev *pdev) { -#ifdef CONFIG_PPC_OF - device_create_file(&pdev->dev, &dev_attr_devspec); -#endif /* CONFIG_PPC_OF */ } diff --git a/arch/ppc/kernel/ppc_htab.c b/arch/ppc/kernel/ppc_htab.c index 2f5c7650274..eabac6cad1f 100644 --- a/arch/ppc/kernel/ppc_htab.c +++ b/arch/ppc/kernel/ppc_htab.c @@ -104,7 +104,7 @@ static char *pmc2_lookup(unsigned long mmcr0) static int ppc_htab_show(struct seq_file *m, void *v) { unsigned long mmcr0 = 0, pmc1 = 0, pmc2 = 0; -#if defined(CONFIG_PPC_STD_MMU) && !defined(CONFIG_PPC64BRIDGE) +#if defined(CONFIG_PPC_STD_MMU) unsigned int kptes = 0, uptes = 0; PTE *ptr; #endif /* CONFIG_PPC_STD_MMU */ @@ -133,7 +133,6 @@ static int ppc_htab_show(struct seq_file *m, void *v) return 0; } -#ifndef CONFIG_PPC64BRIDGE for (ptr = Hash; ptr < Hash_end; ptr++) { unsigned int mctx, vsid; @@ -147,7 +146,6 @@ static int ppc_htab_show(struct seq_file *m, void *v) else uptes++; } -#endif seq_printf(m, "PTE Hash Table Information\n" @@ -155,20 +153,16 @@ static int ppc_htab_show(struct seq_file *m, void *v) "Buckets\t\t: %lu\n" "Address\t\t: %08lx\n" "Entries\t\t: %lu\n" -#ifndef CONFIG_PPC64BRIDGE "User ptes\t: %u\n" "Kernel ptes\t: %u\n" "Percent full\t: %lu%%\n" -#endif , (unsigned long)(Hash_size>>10), (Hash_size/(sizeof(PTE)*8)), (unsigned long)Hash, Hash_size/sizeof(PTE) -#ifndef CONFIG_PPC64BRIDGE , uptes, kptes, ((kptes+uptes)*100) / (Hash_size/sizeof(PTE)) -#endif ); seq_printf(m, diff --git a/arch/ppc/kernel/ppc_ksyms.c b/arch/ppc/kernel/ppc_ksyms.c index 683e028000e..865ba74991a 100644 --- a/arch/ppc/kernel/ppc_ksyms.c +++ b/arch/ppc/kernel/ppc_ksyms.c @@ -29,7 +29,6 @@ #include <linux/adb.h> #include <linux/cuda.h> #include <linux/pmu.h> -#include <asm/prom.h> #include <asm/system.h> #include <asm/pci-bridge.h> #include <asm/irq.h> @@ -207,27 +206,6 @@ EXPORT_SYMBOL(adb_try_handler_change); EXPORT_SYMBOL(cuda_request); EXPORT_SYMBOL(cuda_poll); #endif /* CONFIG_ADB_CUDA */ -#ifdef CONFIG_PPC_OF -EXPORT_SYMBOL(find_devices); -EXPORT_SYMBOL(find_type_devices); -EXPORT_SYMBOL(find_compatible_devices); -EXPORT_SYMBOL(find_path_device); -EXPORT_SYMBOL(device_is_compatible); -EXPORT_SYMBOL(machine_is_compatible); -EXPORT_SYMBOL(find_all_nodes); -EXPORT_SYMBOL(get_property); -EXPORT_SYMBOL(request_OF_resource); -EXPORT_SYMBOL(release_OF_resource); -EXPORT_SYMBOL(of_find_node_by_name); -EXPORT_SYMBOL(of_find_node_by_type); -EXPORT_SYMBOL(of_find_compatible_node); -EXPORT_SYMBOL(of_find_node_by_path); -EXPORT_SYMBOL(of_find_all_nodes); -EXPORT_SYMBOL(of_get_parent); -EXPORT_SYMBOL(of_get_next_child); -EXPORT_SYMBOL(of_node_get); -EXPORT_SYMBOL(of_node_put); -#endif /* CONFIG_PPC_OF */ #if defined(CONFIG_BOOTX_TEXT) EXPORT_SYMBOL(btext_update_display); #endif diff --git a/arch/ppc/kernel/setup.c b/arch/ppc/kernel/setup.c index 53e9deacee8..7eb91a2e818 100644 --- a/arch/ppc/kernel/setup.c +++ b/arch/ppc/kernel/setup.c @@ -1,5 +1,5 @@ /* - * Common prep/chrp boot and setup code. + * Common prep boot and setup code. */ #include <linux/config.h> @@ -72,17 +72,12 @@ unsigned long ISA_DMA_THRESHOLD; unsigned int DMA_MODE_READ; unsigned int DMA_MODE_WRITE; -#ifdef CONFIG_PPC_MULTIPLATFORM -int _machine = 0; -EXPORT_SYMBOL(_machine); - +#ifdef CONFIG_PPC_PREP extern void prep_init(unsigned long r3, unsigned long r4, unsigned long r5, unsigned long r6, unsigned long r7); -extern void chrp_init(unsigned long r3, unsigned long r4, - unsigned long r5, unsigned long r6, unsigned long r7); dev_t boot_dev; -#endif /* CONFIG_PPC_MULTIPLATFORM */ +#endif /* CONFIG_PPC_PREP */ int have_of; EXPORT_SYMBOL(have_of); @@ -319,72 +314,12 @@ early_init(int r3, int r4, int r5) identify_cpu(offset, 0); do_cpu_ftr_fixups(offset); -#if defined(CONFIG_PPC_OF) - reloc_got2(offset); - - /* - * don't do anything on prep - * for now, don't use bootinfo because it breaks yaboot 0.5 - * and assume that if we didn't find a magic number, we have OF - */ - if (*(unsigned long *)(0) != 0xdeadc0de) - phys = prom_init(r3, r4, (prom_entry)r5); - - reloc_got2(-offset); -#endif - return phys; } -#ifdef CONFIG_PPC_OF -/* - * Assume here that all clock rates are the same in a - * smp system. -- Cort - */ -int -of_show_percpuinfo(struct seq_file *m, int i) -{ - struct device_node *cpu_node; - u32 *fp; - int s; - - cpu_node = find_type_devices("cpu"); - if (!cpu_node) - return 0; - for (s = 0; s < i && cpu_node->next; s++) - cpu_node = cpu_node->next; - fp = (u32 *)get_property(cpu_node, "clock-frequency", NULL); - if (fp) - seq_printf(m, "clock\t\t: %dMHz\n", *fp / 1000000); - return 0; -} - -void __init -intuit_machine_type(void) -{ - char *model; - struct device_node *root; - - /* ask the OF info if we're a chrp or pmac */ - root = find_path_device("/"); - if (root != 0) { - /* assume pmac unless proven to be chrp -- Cort */ - _machine = _MACH_Pmac; - model = get_property(root, "device_type", NULL); - if (model && !strncmp("chrp", model, 4)) - _machine = _MACH_chrp; - else { - model = get_property(root, "model", NULL); - if (model && !strncmp(model, "IBM", 3)) - _machine = _MACH_chrp; - } - } -} -#endif - -#ifdef CONFIG_PPC_MULTIPLATFORM +#ifdef CONFIG_PPC_PREP /* - * The PPC_MULTIPLATFORM version of platform_init... + * The PPC_PREP version of platform_init... */ void __init platform_init(unsigned long r3, unsigned long r4, unsigned long r5, @@ -399,161 +334,9 @@ platform_init(unsigned long r3, unsigned long r4, unsigned long r5, parse_bootinfo(find_bootinfo()); - /* if we didn't get any bootinfo telling us what we are... */ - if (_machine == 0) { - /* prep boot loader tells us if we're prep or not */ - if ( *(unsigned long *)(KERNELBASE) == (0xdeadc0de) ) - _machine = _MACH_prep; - } - -#ifdef CONFIG_PPC_PREP - /* not much more to do here, if prep */ - if (_machine == _MACH_prep) { - prep_init(r3, r4, r5, r6, r7); - return; - } -#endif - -#ifdef CONFIG_PPC_OF - have_of = 1; - - /* prom_init has already been called from __start */ - if (boot_infos) - relocate_nodes(); - - /* If we aren't PReP, we can find out if we're Pmac - * or CHRP with this. */ - if (_machine == 0) - intuit_machine_type(); - - /* finish_device_tree may need _machine defined. */ - finish_device_tree(); - - /* - * If we were booted via quik, r3 points to the physical - * address of the command-line parameters. - * If we were booted from an xcoff image (i.e. netbooted or - * booted from floppy), we get the command line from the - * bootargs property of the /chosen node. - * If an initial ramdisk is present, r3 and r4 - * are used for initrd_start and initrd_size, - * otherwise they contain 0xdeadbeef. - */ - if (r3 >= 0x4000 && r3 < 0x800000 && r4 == 0) { - strlcpy(cmd_line, (char *)r3 + KERNELBASE, - sizeof(cmd_line)); - } else if (boot_infos != 0) { - /* booted by BootX - check for ramdisk */ - if (boot_infos->kernelParamsOffset != 0) - strlcpy(cmd_line, (char *) boot_infos - + boot_infos->kernelParamsOffset, - sizeof(cmd_line)); -#ifdef CONFIG_BLK_DEV_INITRD - if (boot_infos->ramDisk) { - initrd_start = (unsigned long) boot_infos - + boot_infos->ramDisk; - initrd_end = initrd_start + boot_infos->ramDiskSize; - initrd_below_start_ok = 1; - } -#endif - } else { - struct device_node *chosen; - char *p; - -#ifdef CONFIG_BLK_DEV_INITRD - if (r3 && r4 && r4 != 0xdeadbeef) { - if (r3 < KERNELBASE) - r3 += KERNELBASE; - initrd_start = r3; - initrd_end = r3 + r4; - ROOT_DEV = Root_RAM0; - initrd_below_start_ok = 1; - } -#endif - chosen = find_devices("chosen"); - if (chosen != NULL) { - p = get_property(chosen, "bootargs", NULL); - if (p && *p) { - strlcpy(cmd_line, p, sizeof(cmd_line)); - } - } - } -#ifdef CONFIG_ADB - if (strstr(cmd_line, "adb_sync")) { - extern int __adb_probe_sync; - __adb_probe_sync = 1; - } -#endif /* CONFIG_ADB */ - - switch (_machine) { -#ifdef CONFIG_PPC_CHRP - case _MACH_chrp: - chrp_init(r3, r4, r5, r6, r7); - break; -#endif - } -#endif /* CONFIG_PPC_OF */ + prep_init(r3, r4, r5, r6, r7); } -#endif /* CONFIG_PPC_MULTIPLATFORM */ - -#ifdef CONFIG_PPC_OF -#ifdef CONFIG_SERIAL_CORE_CONSOLE -extern char *of_stdout_device; - -static int __init set_preferred_console(void) -{ - struct device_node *prom_stdout; - char *name; - int offset = 0; - - if (of_stdout_device == NULL) - return -ENODEV; - - /* The user has requested a console so this is already set up. */ - if (strstr(saved_command_line, "console=")) - return -EBUSY; - - prom_stdout = find_path_device(of_stdout_device); - if (!prom_stdout) - return -ENODEV; - - name = (char *)get_property(prom_stdout, "name", NULL); - if (!name) - return -ENODEV; - - if (strcmp(name, "serial") == 0) { - int i; - u32 *reg = (u32 *)get_property(prom_stdout, "reg", &i); - if (i > 8) { - switch (reg[1]) { - case 0x3f8: - offset = 0; - break; - case 0x2f8: - offset = 1; - break; - case 0x898: - offset = 2; - break; - case 0x890: - offset = 3; - break; - default: - /* We dont recognise the serial port */ - return -ENODEV; - } - } - } else if (strcmp(name, "ch-a") == 0) - offset = 0; - else if (strcmp(name, "ch-b") == 0) - offset = 1; - else - return -ENODEV; - return add_preferred_console("ttyS", offset, NULL); -} -console_initcall(set_preferred_console); -#endif /* CONFIG_SERIAL_CORE_CONSOLE */ -#endif /* CONFIG_PPC_OF */ +#endif /* CONFIG_PPC_PREP */ struct bi_record *find_bootinfo(void) { @@ -589,23 +372,6 @@ void parse_bootinfo(struct bi_record *rec) initrd_end = data[0] + data[1] + KERNELBASE; break; #endif /* CONFIG_BLK_DEV_INITRD */ -#ifdef CONFIG_PPC_MULTIPLATFORM - case BI_MACHTYPE: - /* Machine types changed with the merge. Since the - * bootinfo are now deprecated, we can just hard code - * the appropriate conversion here for when we are - * called with yaboot which passes us a machine type - * this way. - */ - switch(data[0]) { - case 1: _machine = _MACH_prep; break; - case 2: _machine = _MACH_Pmac; break; - case 4: _machine = _MACH_chrp; break; - default: - _machine = data[0]; - } - break; -#endif case BI_MEMSIZE: boot_mem_size = data[0]; break; @@ -631,9 +397,6 @@ machine_init(unsigned long r3, unsigned long r4, unsigned long r5, #ifdef CONFIG_6xx ppc_md.power_save = ppc6xx_idle; #endif -#ifdef CONFIG_POWER4 - ppc_md.power_save = power4_idle; -#endif platform_init(r3, r4, r5, r6, r7); @@ -799,7 +562,4 @@ void __init setup_arch(char **cmdline_p) if ( ppc_md.progress ) ppc_md.progress("arch: exit", 0x3eab); paging_init(); - - /* this is for modules since _machine can be a define -- Cort */ - ppc_md.ppc_machine = _machine; } diff --git a/arch/ppc/mm/hashtable.S b/arch/ppc/mm/hashtable.S index f09fa88db35..31d0a924317 100644 --- a/arch/ppc/mm/hashtable.S +++ b/arch/ppc/mm/hashtable.S @@ -74,12 +74,6 @@ _GLOBAL(hash_page_sync) */ .text _GLOBAL(hash_page) -#ifdef CONFIG_PPC64BRIDGE - mfmsr r0 - clrldi r0,r0,1 /* make sure it's in 32-bit mode */ - MTMSRD(r0) - isync -#endif tophys(r7,0) /* gets -KERNELBASE into r7 */ #ifdef CONFIG_SMP addis r8,r7,mmu_hash_lock@h @@ -303,7 +297,6 @@ Hash_base = 0xc0180000 Hash_bits = 12 /* e.g. 256kB hash table */ Hash_msk = (((1 << Hash_bits) - 1) * 64) -#ifndef CONFIG_PPC64BRIDGE /* defines for the PTE format for 32-bit PPCs */ #define PTE_SIZE 8 #define PTEG_SIZE 64 @@ -317,21 +310,6 @@ Hash_msk = (((1 << Hash_bits) - 1) * 64) #define SET_V(r) oris r,r,PTE_V@h #define CLR_V(r,t) rlwinm r,r,0,1,31 -#else -/* defines for the PTE format for 64-bit PPCs */ -#define PTE_SIZE 16 -#define PTEG_SIZE 128 -#define LG_PTEG_SIZE 7 -#define LDPTEu ldu -#define STPTE std -#define CMPPTE cmpd -#define PTE_H 2 -#define PTE_V 1 -#define TST_V(r) andi. r,r,PTE_V -#define SET_V(r) ori r,r,PTE_V -#define CLR_V(r,t) li t,PTE_V; andc r,r,t -#endif /* CONFIG_PPC64BRIDGE */ - #define HASH_LEFT 31-(LG_PTEG_SIZE+Hash_bits-1) #define HASH_RIGHT 31-LG_PTEG_SIZE @@ -349,14 +327,8 @@ BEGIN_FTR_SECTION END_FTR_SECTION_IFSET(CPU_FTR_NEED_COHERENT) /* Construct the high word of the PPC-style PTE (r5) */ -#ifndef CONFIG_PPC64BRIDGE rlwinm r5,r3,7,1,24 /* put VSID in 0x7fffff80 bits */ rlwimi r5,r4,10,26,31 /* put in API (abbrev page index) */ -#else /* CONFIG_PPC64BRIDGE */ - clrlwi r3,r3,8 /* reduce vsid to 24 bits */ - sldi r5,r3,12 /* shift vsid into position */ - rlwimi r5,r4,16,20,24 /* put in API (abbrev page index) */ -#endif /* CONFIG_PPC64BRIDGE */ SET_V(r5) /* set V (valid) bit */ /* Get the address of the primary PTE group in the hash table (r3) */ @@ -540,14 +512,8 @@ _GLOBAL(flush_hash_pages) add r3,r3,r0 /* note code below trims to 24 bits */ /* Construct the high word of the PPC-style PTE (r11) */ -#ifndef CONFIG_PPC64BRIDGE rlwinm r11,r3,7,1,24 /* put VSID in 0x7fffff80 bits */ rlwimi r11,r4,10,26,31 /* put in API (abbrev page index) */ -#else /* CONFIG_PPC64BRIDGE */ - clrlwi r3,r3,8 /* reduce vsid to 24 bits */ - sldi r11,r3,12 /* shift vsid into position */ - rlwimi r11,r4,16,20,24 /* put in API (abbrev page index) */ -#endif /* CONFIG_PPC64BRIDGE */ SET_V(r11) /* set V (valid) bit */ #ifdef CONFIG_SMP diff --git a/arch/ppc/mm/init.c b/arch/ppc/mm/init.c index cb1c294fb93..386e000bcb7 100644 --- a/arch/ppc/mm/init.c +++ b/arch/ppc/mm/init.c @@ -412,14 +412,6 @@ void __init mem_init(void) } #endif /* CONFIG_BLK_DEV_INITRD */ -#ifdef CONFIG_PPC_OF - /* mark the RTAS pages as reserved */ - if ( rtas_data ) - for (addr = (ulong)__va(rtas_data); - addr < PAGE_ALIGN((ulong)__va(rtas_data)+rtas_size) ; - addr += PAGE_SIZE) - SetPageReserved(virt_to_page(addr)); -#endif for (addr = PAGE_OFFSET; addr < (unsigned long)high_memory; addr += PAGE_SIZE) { if (!PageReserved(virt_to_page(addr))) @@ -494,11 +486,6 @@ set_phys_avail(unsigned long total_memory) initrd_end - initrd_start, 1); } #endif /* CONFIG_BLK_DEV_INITRD */ -#ifdef CONFIG_PPC_OF - /* remove the RTAS pages from the available memory */ - if (rtas_data) - mem_pieces_remove(&phys_avail, rtas_data, rtas_size, 1); -#endif } /* Mark some memory as reserved by removing it from phys_avail. */ diff --git a/arch/ppc/mm/mmu_context.c b/arch/ppc/mm/mmu_context.c index a8816e0f6a8..b4a4b3f02a1 100644 --- a/arch/ppc/mm/mmu_context.c +++ b/arch/ppc/mm/mmu_context.c @@ -2,7 +2,7 @@ * This file contains the routines for handling the MMU on those * PowerPC implementations where the MMU substantially follows the * architecture specification. This includes the 6xx, 7xx, 7xxx, - * 8260, and POWER3 implementations but excludes the 8xx and 4xx. + * 8260, and 83xx implementations but excludes the 8xx and 4xx. * -- paulus * * Derived from arch/ppc/mm/init.c: diff --git a/arch/ppc/mm/pgtable.c b/arch/ppc/mm/pgtable.c index 6ea9185fd12..a1924876cad 100644 --- a/arch/ppc/mm/pgtable.c +++ b/arch/ppc/mm/pgtable.c @@ -39,7 +39,7 @@ unsigned long ioremap_base; unsigned long ioremap_bot; int io_bat_index; -#if defined(CONFIG_6xx) || defined(CONFIG_POWER3) +#if defined(CONFIG_6xx) #define HAVE_BATS 1 #endif diff --git a/arch/ppc/mm/ppc_mmu.c b/arch/ppc/mm/ppc_mmu.c index 9a381ed5eb2..25bb6f3347c 100644 --- a/arch/ppc/mm/ppc_mmu.c +++ b/arch/ppc/mm/ppc_mmu.c @@ -2,7 +2,7 @@ * This file contains the routines for handling the MMU on those * PowerPC implementations where the MMU substantially follows the * architecture specification. This includes the 6xx, 7xx, 7xxx, - * 8260, and POWER3 implementations but excludes the 8xx and 4xx. + * 8260, and 83xx implementations but excludes the 8xx and 4xx. * -- paulus * * Derived from arch/ppc/mm/init.c: @@ -42,11 +42,7 @@ unsigned long _SDR1; union ubat { /* BAT register values to be loaded */ BAT bat; -#ifdef CONFIG_PPC64BRIDGE - u64 word[2]; -#else u32 word[2]; -#endif } BATS[4][2]; /* 4 pairs of IBAT, DBAT */ struct batrange { /* stores address ranges mapped by BATs */ @@ -83,9 +79,6 @@ unsigned long p_mapped_by_bats(unsigned long pa) unsigned long __init mmu_mapin_ram(void) { -#ifdef CONFIG_POWER4 - return 0; -#else unsigned long tot, bl, done; unsigned long max_size = (256<<20); unsigned long align; @@ -122,7 +115,6 @@ unsigned long __init mmu_mapin_ram(void) } return done; -#endif } /* @@ -205,27 +197,10 @@ void __init MMU_init_hw(void) if ( ppc_md.progress ) ppc_md.progress("hash:enter", 0x105); -#ifdef CONFIG_PPC64BRIDGE -#define LG_HPTEG_SIZE 7 /* 128 bytes per HPTEG */ -#define SDR1_LOW_BITS (lg_n_hpteg - 11) -#define MIN_N_HPTEG 2048 /* min 256kB hash table */ -#else #define LG_HPTEG_SIZE 6 /* 64 bytes per HPTEG */ #define SDR1_LOW_BITS ((n_hpteg - 1) >> 10) #define MIN_N_HPTEG 1024 /* min 64kB hash table */ -#endif - -#ifdef CONFIG_POWER4 - /* The hash table has already been allocated and initialized - in prom.c */ - n_hpteg = Hash_size >> LG_HPTEG_SIZE; - lg_n_hpteg = __ilog2(n_hpteg); - - /* Remove the hash table from the available memory */ - if (Hash) - reserve_phys_mem(__pa(Hash), Hash_size); -#else /* CONFIG_POWER4 */ /* * Allow 1 HPTE (1/8 HPTEG) for each page of memory. * This is less than the recommended amount, but then @@ -248,7 +223,6 @@ void __init MMU_init_hw(void) Hash = mem_pieces_find(Hash_size, Hash_size); cacheable_memzero(Hash, Hash_size); _SDR1 = __pa(Hash) | SDR1_LOW_BITS; -#endif /* CONFIG_POWER4 */ Hash_end = (PTE *) ((unsigned long)Hash + Hash_size); diff --git a/arch/ppc/platforms/Makefile b/arch/ppc/platforms/Makefile index e8b91a33ce9..90c62229442 100644 --- a/arch/ppc/platforms/Makefile +++ b/arch/ppc/platforms/Makefile @@ -2,18 +2,10 @@ # Makefile for the linux kernel. # -# Extra CFLAGS so we don't have to do relative includes -CFLAGS_chrp_setup.o += -Iarch/$(ARCH)/mm - obj-$(CONFIG_APUS) += apus_setup.o ifeq ($(CONFIG_APUS),y) obj-$(CONFIG_PCI) += apus_pci.o endif -obj-$(CONFIG_PPC_CHRP) += chrp_setup.o chrp_time.o chrp_pci.o \ - chrp_pegasos_eth.o -ifeq ($(CONFIG_PPC_CHRP),y) -obj-$(CONFIG_NVRAM) += chrp_nvram.o -endif obj-$(CONFIG_PPC_PREP) += prep_pci.o prep_setup.o obj-$(CONFIG_PREP_RESIDUAL) += residual.o obj-$(CONFIG_PQ2ADS) += pq2ads.o @@ -40,7 +32,3 @@ obj-$(CONFIG_EV64360) += ev64360.o obj-$(CONFIG_MPC86XADS) += mpc866ads_setup.o obj-$(CONFIG_MPC885ADS) += mpc885ads_setup.o obj-$(CONFIG_ADS8272) += mpc8272ads_setup.o - -ifeq ($(CONFIG_SMP),y) -obj-$(CONFIG_PPC_CHRP) += chrp_smp.o -endif diff --git a/arch/ppc/platforms/chrp_nvram.c b/arch/ppc/platforms/chrp_nvram.c deleted file mode 100644 index 465ba9b090e..00000000000 --- a/arch/ppc/platforms/chrp_nvram.c +++ /dev/null @@ -1,83 +0,0 @@ -/* - * c 2001 PPC 64 Team, IBM Corp - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - * - * /dev/nvram driver for PPC - * - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/slab.h> -#include <linux/spinlock.h> -#include <asm/uaccess.h> -#include <asm/prom.h> -#include <asm/machdep.h> - -static unsigned int nvram_size; -static unsigned char nvram_buf[4]; -static DEFINE_SPINLOCK(nvram_lock); - -static unsigned char chrp_nvram_read(int addr) -{ - unsigned long done, flags; - unsigned char ret; - - if (addr >= nvram_size) { - printk(KERN_DEBUG "%s: read addr %d > nvram_size %u\n", - current->comm, addr, nvram_size); - return 0xff; - } - spin_lock_irqsave(&nvram_lock, flags); - if ((call_rtas("nvram-fetch", 3, 2, &done, addr, __pa(nvram_buf), 1) != 0) || 1 != done) - ret = 0xff; - else - ret = nvram_buf[0]; - spin_unlock_irqrestore(&nvram_lock, flags); - - return ret; -} - -static void chrp_nvram_write(int addr, unsigned char val) -{ - unsigned long done, flags; - - if (addr >= nvram_size) { - printk(KERN_DEBUG "%s: write addr %d > nvram_size %u\n", - current->comm, addr, nvram_size); - return; - } - spin_lock_irqsave(&nvram_lock, flags); - nvram_buf[0] = val; - if ((call_rtas("nvram-store", 3, 2, &done, addr, __pa(nvram_buf), 1) != 0) || 1 != done) - printk(KERN_DEBUG "rtas IO error storing 0x%02x at %d", val, addr); - spin_unlock_irqrestore(&nvram_lock, flags); -} - -void __init chrp_nvram_init(void) -{ - struct device_node *nvram; - unsigned int *nbytes_p, proplen; - - nvram = of_find_node_by_type(NULL, "nvram"); - if (nvram == NULL) - return; - - nbytes_p = (unsigned int *)get_property(nvram, "#bytes", &proplen); - if (nbytes_p == NULL || proplen != sizeof(unsigned int)) - return; - - nvram_size = *nbytes_p; - - printk(KERN_INFO "CHRP nvram contains %u bytes\n", nvram_size); - of_node_put(nvram); - - ppc_md.nvram_read_val = chrp_nvram_read; - ppc_md.nvram_write_val = chrp_nvram_write; - - return; -} diff --git a/arch/ppc/platforms/chrp_pci.c b/arch/ppc/platforms/chrp_pci.c deleted file mode 100644 index c7fe6182bb7..00000000000 --- a/arch/ppc/platforms/chrp_pci.c +++ /dev/null @@ -1,309 +0,0 @@ -/* - * CHRP pci routines. - */ - -#include <linux/config.h> -#include <linux/kernel.h> -#include <linux/pci.h> -#include <linux/delay.h> -#include <linux/string.h> -#include <linux/init.h> -#include <linux/ide.h> - -#include <asm/io.h> -#include <asm/pgtable.h> -#include <asm/irq.h> -#include <asm/hydra.h> -#include <asm/prom.h> -#include <asm/gg2.h> -#include <asm/machdep.h> -#include <asm/sections.h> -#include <asm/pci-bridge.h> -#include <asm/open_pic.h> - -/* LongTrail */ -void __iomem *gg2_pci_config_base; - -/* - * The VLSI Golden Gate II has only 512K of PCI configuration space, so we - * limit the bus number to 3 bits - */ - -int gg2_read_config(struct pci_bus *bus, unsigned int devfn, int off, - int len, u32 *val) -{ - volatile void __iomem *cfg_data; - struct pci_controller *hose = bus->sysdata; - - if (bus->number > 7) - return PCIBIOS_DEVICE_NOT_FOUND; - /* - * Note: the caller has already checked that off is - * suitably aligned and that len is 1, 2 or 4. - */ - cfg_data = hose->cfg_data + ((bus->number<<16) | (devfn<<8) | off); - switch (len) { - case 1: - *val = in_8(cfg_data); - break; - case 2: - *val = in_le16(cfg_data); - break; - default: - *val = in_le32(cfg_data); - break; - } - return PCIBIOS_SUCCESSFUL; -} - -int gg2_write_config(struct pci_bus *bus, unsigned int devfn, int off, - int len, u32 val) -{ - volatile void __iomem *cfg_data; - struct pci_controller *hose = bus->sysdata; - - if (bus->number > 7) - return PCIBIOS_DEVICE_NOT_FOUND; - /* - * Note: the caller has already checked that off is - * suitably aligned and that len is 1, 2 or 4. - */ - cfg_data = hose->cfg_data + ((bus->number<<16) | (devfn<<8) | off); - switch (len) { - case 1: - out_8(cfg_data, val); - break; - case 2: - out_le16(cfg_data, val); - break; - default: - out_le32(cfg_data, val); - break; - } - return PCIBIOS_SUCCESSFUL; -} - -static struct pci_ops gg2_pci_ops = -{ - gg2_read_config, - gg2_write_config -}; - -/* - * Access functions for PCI config space using RTAS calls. - */ -int -rtas_read_config(struct pci_bus *bus, unsigned int devfn, int offset, - int len, u32 *val) -{ - struct pci_controller *hose = bus->sysdata; - unsigned long addr = (offset & 0xff) | ((devfn & 0xff) << 8) - | (((bus->number - hose->first_busno) & 0xff) << 16) - | (hose->index << 24); - unsigned long ret = ~0UL; - int rval; - - rval = call_rtas("read-pci-config", 2, 2, &ret, addr, len); - *val = ret; - return rval? PCIBIOS_DEVICE_NOT_FOUND: PCIBIOS_SUCCESSFUL; -} - -int -rtas_write_config(struct pci_bus *bus, unsigned int devfn, int offset, - int len, u32 val) -{ - struct pci_controller *hose = bus->sysdata; - unsigned long addr = (offset & 0xff) | ((devfn & 0xff) << 8) - | (((bus->number - hose->first_busno) & 0xff) << 16) - | (hose->index << 24); - int rval; - - rval = call_rtas("write-pci-config", 3, 1, NULL, addr, len, val); - return rval? PCIBIOS_DEVICE_NOT_FOUND: PCIBIOS_SUCCESSFUL; -} - -static struct pci_ops rtas_pci_ops = -{ - rtas_read_config, - rtas_write_config -}; - -volatile struct Hydra __iomem *Hydra = NULL; - -int __init -hydra_init(void) -{ - struct device_node *np; - - np = find_devices("mac-io"); - if (np == NULL || np->n_addrs == 0) - return 0; - Hydra = ioremap(np->addrs[0].address, np->addrs[0].size); - printk("Hydra Mac I/O at %x\n", np->addrs[0].address); - printk("Hydra Feature_Control was %x", - in_le32(&Hydra->Feature_Control)); - out_le32(&Hydra->Feature_Control, (HYDRA_FC_SCC_CELL_EN | - HYDRA_FC_SCSI_CELL_EN | - HYDRA_FC_SCCA_ENABLE | - HYDRA_FC_SCCB_ENABLE | - HYDRA_FC_ARB_BYPASS | - HYDRA_FC_MPIC_ENABLE | - HYDRA_FC_SLOW_SCC_PCLK | - HYDRA_FC_MPIC_IS_MASTER)); - printk(", now %x\n", in_le32(&Hydra->Feature_Control)); - return 1; -} - -void __init -chrp_pcibios_fixup(void) -{ - struct pci_dev *dev = NULL; - struct device_node *np; - - /* PCI interrupts are controlled by the OpenPIC */ - for_each_pci_dev(dev) { - np = pci_device_to_OF_node(dev); - if ((np != 0) && (np->n_intrs > 0) && (np->intrs[0].line != 0)) - dev->irq = np->intrs[0].line; - pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq); - } -} - -#define PRG_CL_RESET_VALID 0x00010000 - -static void __init -setup_python(struct pci_controller *hose, struct device_node *dev) -{ - u32 __iomem *reg; - u32 val; - unsigned long addr = dev->addrs[0].address; - - setup_indirect_pci(hose, addr + 0xf8000, addr + 0xf8010); - - /* Clear the magic go-slow bit */ - reg = ioremap(dev->addrs[0].address + 0xf6000, 0x40); - val = in_be32(®[12]); - if (val & PRG_CL_RESET_VALID) { - out_be32(®[12], val & ~PRG_CL_RESET_VALID); - in_be32(®[12]); - } - iounmap(reg); -} - -/* Marvell Discovery II based Pegasos 2 */ -static void __init setup_peg2(struct pci_controller *hose, struct device_node *dev) -{ - struct device_node *root = find_path_device("/"); - struct device_node *rtas; - - rtas = of_find_node_by_name (root, "rtas"); - if (rtas) { - hose->ops = &rtas_pci_ops; - } else { - printk ("RTAS supporting Pegasos OF not found, please upgrade" - " your firmware\n"); - } - pci_assign_all_buses = 1; -} - -void __init -chrp_find_bridges(void) -{ - struct device_node *dev; - int *bus_range; - int len, index = -1; - struct pci_controller *hose; - unsigned int *dma; - char *model, *machine; - int is_longtrail = 0, is_mot = 0, is_pegasos = 0; - struct device_node *root = find_path_device("/"); - - /* - * The PCI host bridge nodes on some machines don't have - * properties to adequately identify them, so we have to - * look at what sort of machine this is as well. - */ - machine = get_property(root, "model", NULL); - if (machine != NULL) { - is_longtrail = strncmp(machine, "IBM,LongTrail", 13) == 0; - is_mot = strncmp(machine, "MOT", 3) == 0; - if (strncmp(machine, "Pegasos2", 8) == 0) - is_pegasos = 2; - else if (strncmp(machine, "Pegasos", 7) == 0) - is_pegasos = 1; - } - for (dev = root->child; dev != NULL; dev = dev->sibling) { - if (dev->type == NULL || strcmp(dev->type, "pci") != 0) - continue; - ++index; - /* The GG2 bridge on the LongTrail doesn't have an address */ - if (dev->n_addrs < 1 && !is_longtrail) { - printk(KERN_WARNING "Can't use %s: no address\n", - dev->full_name); - continue; - } - bus_range = (int *) get_property(dev, "bus-range", &len); - if (bus_range == NULL || len < 2 * sizeof(int)) { - printk(KERN_WARNING "Can't get bus-range for %s\n", - dev->full_name); - continue; - } - if (bus_range[1] == bus_range[0]) - printk(KERN_INFO "PCI bus %d", bus_range[0]); - else - printk(KERN_INFO "PCI buses %d..%d", - bus_range[0], bus_range[1]); - printk(" controlled by %s", dev->type); - if (dev->n_addrs > 0) - printk(" at %x", dev->addrs[0].address); - printk("\n"); - - hose = pcibios_alloc_controller(); - if (!hose) { - printk("Can't allocate PCI controller structure for %s\n", - dev->full_name); - continue; - } - hose->arch_data = dev; - hose->first_busno = bus_range[0]; - hose->last_busno = bus_range[1]; - - model = get_property(dev, "model", NULL); - if (model == NULL) - model = "<none>"; - if (device_is_compatible(dev, "IBM,python")) { - setup_python(hose, dev); - } else if (is_mot - || strncmp(model, "Motorola, Grackle", 17) == 0) { - setup_indirect_pci(hose, 0xfec00000, 0xfee00000); - } else if (is_longtrail) { - void __iomem *p = ioremap(GG2_PCI_CONFIG_BASE, 0x80000); - hose->ops = &gg2_pci_ops; - hose->cfg_data = p; - gg2_pci_config_base = p; - } else if (is_pegasos == 1) { - setup_indirect_pci(hose, 0xfec00cf8, 0xfee00cfc); - } else if (is_pegasos == 2) { - setup_peg2(hose, dev); - } else { - printk("No methods for %s (model %s), using RTAS\n", - dev->full_name, model); - hose->ops = &rtas_pci_ops; - } - - pci_process_bridge_OF_ranges(hose, dev, index == 0); - - /* check the first bridge for a property that we can - use to set pci_dram_offset */ - dma = (unsigned int *) - get_property(dev, "ibm,dma-ranges", &len); - if (index == 0 && dma != NULL && len >= 6 * sizeof(*dma)) { - pci_dram_offset = dma[2] - dma[3]; - printk("pci_dram_offset = %lx\n", pci_dram_offset); - } - } - - /* Do not fixup interrupts from OF tree on pegasos */ - if (is_pegasos == 0) - ppc_md.pcibios_fixup = chrp_pcibios_fixup; -} diff --git a/arch/ppc/platforms/chrp_pegasos_eth.c b/arch/ppc/platforms/chrp_pegasos_eth.c deleted file mode 100644 index 9305c8aa137..00000000000 --- a/arch/ppc/platforms/chrp_pegasos_eth.c +++ /dev/null @@ -1,211 +0,0 @@ -/* - * Copyright (C) 2005 Sven Luther <sl@bplan-gmbh.de> - * Thanks to : - * Dale Farnsworth <dale@farnsworth.org> - * Mark A. Greer <mgreer@mvista.com> - * Nicolas DET <nd@bplan-gmbh.de> - * Benjamin Herrenschmidt <benh@kernel.crashing.org> - * And anyone else who helped me on this. - */ - -#include <linux/types.h> -#include <linux/init.h> -#include <linux/ioport.h> -#include <linux/platform_device.h> -#include <linux/mv643xx.h> -#include <linux/pci.h> - -#define PEGASOS2_MARVELL_REGBASE (0xf1000000) -#define PEGASOS2_MARVELL_REGSIZE (0x00004000) -#define PEGASOS2_SRAM_BASE (0xf2000000) -#define PEGASOS2_SRAM_SIZE (256*1024) - -#define PEGASOS2_SRAM_BASE_ETH0 (PEGASOS2_SRAM_BASE) -#define PEGASOS2_SRAM_BASE_ETH1 (PEGASOS2_SRAM_BASE_ETH0 + (PEGASOS2_SRAM_SIZE / 2) ) - - -#define PEGASOS2_SRAM_RXRING_SIZE (PEGASOS2_SRAM_SIZE/4) -#define PEGASOS2_SRAM_TXRING_SIZE (PEGASOS2_SRAM_SIZE/4) - -#undef BE_VERBOSE - -static struct resource mv643xx_eth_shared_resources[] = { - [0] = { - .name = "ethernet shared base", - .start = 0xf1000000 + MV643XX_ETH_SHARED_REGS, - .end = 0xf1000000 + MV643XX_ETH_SHARED_REGS + - MV643XX_ETH_SHARED_REGS_SIZE - 1, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device mv643xx_eth_shared_device = { - .name = MV643XX_ETH_SHARED_NAME, - .id = 0, - .num_resources = ARRAY_SIZE(mv643xx_eth_shared_resources), - .resource = mv643xx_eth_shared_resources, -}; - -static struct resource mv643xx_eth0_resources[] = { - [0] = { - .name = "eth0 irq", - .start = 9, - .end = 9, - .flags = IORESOURCE_IRQ, - }, -}; - - -static struct mv643xx_eth_platform_data eth0_pd = { - .tx_sram_addr = PEGASOS2_SRAM_BASE_ETH0, - .tx_sram_size = PEGASOS2_SRAM_TXRING_SIZE, - .tx_queue_size = PEGASOS2_SRAM_TXRING_SIZE/16, - - .rx_sram_addr = PEGASOS2_SRAM_BASE_ETH0 + PEGASOS2_SRAM_TXRING_SIZE, - .rx_sram_size = PEGASOS2_SRAM_RXRING_SIZE, - .rx_queue_size = PEGASOS2_SRAM_RXRING_SIZE/16, -}; - -static struct platform_device eth0_device = { - .name = MV643XX_ETH_NAME, - .id = 0, - .num_resources = ARRAY_SIZE(mv643xx_eth0_resources), - .resource = mv643xx_eth0_resources, - .dev = { - .platform_data = ð0_pd, - }, -}; - -static struct resource mv643xx_eth1_resources[] = { - [0] = { - .name = "eth1 irq", - .start = 9, - .end = 9, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct mv643xx_eth_platform_data eth1_pd = { - .tx_sram_addr = PEGASOS2_SRAM_BASE_ETH1, - .tx_sram_size = PEGASOS2_SRAM_TXRING_SIZE, - .tx_queue_size = PEGASOS2_SRAM_TXRING_SIZE/16, - - .rx_sram_addr = PEGASOS2_SRAM_BASE_ETH1 + PEGASOS2_SRAM_TXRING_SIZE, - .rx_sram_size = PEGASOS2_SRAM_RXRING_SIZE, - .rx_queue_size = PEGASOS2_SRAM_RXRING_SIZE/16, -}; - -static struct platform_device eth1_device = { - .name = MV643XX_ETH_NAME, - .id = 1, - .num_resources = ARRAY_SIZE(mv643xx_eth1_resources), - .resource = mv643xx_eth1_resources, - .dev = { - .platform_data = ð1_pd, - }, -}; - -static struct platform_device *mv643xx_eth_pd_devs[] __initdata = { - &mv643xx_eth_shared_device, - ð0_device, - ð1_device, -}; - -/***********/ -/***********/ -#define MV_READ(offset,val) { val = readl(mv643xx_reg_base + offset); } -#define MV_WRITE(offset,data) writel(data, mv643xx_reg_base + offset) - -static void __iomem *mv643xx_reg_base; - -static int Enable_SRAM(void) -{ - u32 ALong; - - if (mv643xx_reg_base == NULL) - mv643xx_reg_base = ioremap(PEGASOS2_MARVELL_REGBASE, - PEGASOS2_MARVELL_REGSIZE); - - if (mv643xx_reg_base == NULL) - return -ENOMEM; - -#ifdef BE_VERBOSE - printk("Pegasos II/Marvell MV64361: register remapped from %p to %p\n", - (void *)PEGASOS2_MARVELL_REGBASE, (void *)mv643xx_reg_base); -#endif - - MV_WRITE(MV64340_SRAM_CONFIG, 0); - - MV_WRITE(MV64340_INTEGRATED_SRAM_BASE_ADDR, PEGASOS2_SRAM_BASE >> 16); - - MV_READ(MV64340_BASE_ADDR_ENABLE, ALong); - ALong &= ~(1 << 19); - MV_WRITE(MV64340_BASE_ADDR_ENABLE, ALong); - - ALong = 0x02; - ALong |= PEGASOS2_SRAM_BASE & 0xffff0000; - MV_WRITE(MV643XX_ETH_BAR_4, ALong); - - MV_WRITE(MV643XX_ETH_SIZE_REG_4, (PEGASOS2_SRAM_SIZE-1) & 0xffff0000); - - MV_READ(MV643XX_ETH_BASE_ADDR_ENABLE_REG, ALong); - ALong &= ~(1 << 4); - MV_WRITE(MV643XX_ETH_BASE_ADDR_ENABLE_REG, ALong); - -#ifdef BE_VERBOSE - printk("Pegasos II/Marvell MV64361: register unmapped\n"); - printk("Pegasos II/Marvell MV64361: SRAM at %p, size=%x\n", (void*) PEGASOS2_SRAM_BASE, PEGASOS2_SRAM_SIZE); -#endif - - iounmap(mv643xx_reg_base); - mv643xx_reg_base = NULL; - - return 1; -} - - -/***********/ -/***********/ -int mv643xx_eth_add_pds(void) -{ - int ret = 0; - static struct pci_device_id pci_marvell_mv64360[] = { - { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, PCI_DEVICE_ID_MARVELL_MV64360) }, - { } - }; - -#ifdef BE_VERBOSE - printk("Pegasos II/Marvell MV64361: init\n"); -#endif - - if (pci_dev_present(pci_marvell_mv64360)) { - ret = platform_add_devices(mv643xx_eth_pd_devs, - ARRAY_SIZE(mv643xx_eth_pd_devs)); - - if ( Enable_SRAM() < 0) - { - eth0_pd.tx_sram_addr = 0; - eth0_pd.tx_sram_size = 0; - eth0_pd.rx_sram_addr = 0; - eth0_pd.rx_sram_size = 0; - - eth1_pd.tx_sram_addr = 0; - eth1_pd.tx_sram_size = 0; - eth1_pd.rx_sram_addr = 0; - eth1_pd.rx_sram_size = 0; - -#ifdef BE_VERBOSE - printk("Pegasos II/Marvell MV64361: Can't enable the " - "SRAM\n"); -#endif - } - } - -#ifdef BE_VERBOSE - printk("Pegasos II/Marvell MV64361: init is over\n"); -#endif - - return ret; -} - -device_initcall(mv643xx_eth_add_pds); diff --git a/arch/ppc/platforms/chrp_setup.c b/arch/ppc/platforms/chrp_setup.c deleted file mode 100644 index f9fd3f4f8e2..00000000000 --- a/arch/ppc/platforms/chrp_setup.c +++ /dev/null @@ -1,669 +0,0 @@ -/* - * Copyright (C) 1995 Linus Torvalds - * Adapted from 'alpha' version by Gary Thomas - * Modified by Cort Dougan (cort@cs.nmt.edu) - */ - -/* - * bootup setup stuff.. - */ - -#include <linux/config.h> -#include <linux/errno.h> -#include <linux/sched.h> -#include <linux/kernel.h> -#include <linux/mm.h> -#include <linux/stddef.h> -#include <linux/unistd.h> -#include <linux/ptrace.h> -#include <linux/slab.h> -#include <linux/user.h> -#include <linux/a.out.h> -#include <linux/tty.h> -#include <linux/major.h> -#include <linux/interrupt.h> -#include <linux/reboot.h> -#include <linux/init.h> -#include <linux/pci.h> -#include <linux/version.h> -#include <linux/adb.h> -#include <linux/module.h> -#include <linux/delay.h> -#include <linux/ide.h> -#include <linux/console.h> -#include <linux/seq_file.h> -#include <linux/root_dev.h> -#include <linux/initrd.h> -#include <linux/module.h> - -#include <asm/io.h> -#include <asm/pgtable.h> -#include <asm/prom.h> -#include <asm/gg2.h> -#include <asm/pci-bridge.h> -#include <asm/dma.h> -#include <asm/machdep.h> -#include <asm/irq.h> -#include <asm/hydra.h> -#include <asm/sections.h> -#include <asm/time.h> -#include <asm/btext.h> -#include <asm/i8259.h> -#include <asm/open_pic.h> -#include <asm/xmon.h> -#include "mem_pieces.h" - -unsigned long chrp_get_rtc_time(void); -int chrp_set_rtc_time(unsigned long nowtime); -void chrp_calibrate_decr(void); -long chrp_time_init(void); - -void chrp_find_bridges(void); -void chrp_event_scan(void); -void rtas_display_progress(char *, unsigned short); -void rtas_indicator_progress(char *, unsigned short); -void btext_progress(char *, unsigned short); - -extern int of_show_percpuinfo(struct seq_file *, int); - -int _chrp_type; -EXPORT_SYMBOL(_chrp_type); - -/* - * XXX this should be in xmon.h, but putting it there means xmon.h - * has to include <linux/interrupt.h> (to get irqreturn_t), which - * causes all sorts of problems. -- paulus - */ -extern irqreturn_t xmon_irq(int, void *, struct pt_regs *); - -extern dev_t boot_dev; - -extern PTE *Hash, *Hash_end; -extern unsigned long Hash_size, Hash_mask; -extern int probingmem; -extern unsigned long loops_per_jiffy; -static int max_width; - -#ifdef CONFIG_SMP -extern struct smp_ops_t chrp_smp_ops; -#endif - -static const char *gg2_memtypes[4] = { - "FPM", "SDRAM", "EDO", "BEDO" -}; -static const char *gg2_cachesizes[4] = { - "256 KB", "512 KB", "1 MB", "Reserved" -}; -static const char *gg2_cachetypes[4] = { - "Asynchronous", "Reserved", "Flow-Through Synchronous", - "Pipelined Synchronous" -}; -static const char *gg2_cachemodes[4] = { - "Disabled", "Write-Through", "Copy-Back", "Transparent Mode" -}; - -int -chrp_show_cpuinfo(struct seq_file *m) -{ - int i, sdramen; - unsigned int t; - struct device_node *root; - const char *model = ""; - - root = find_path_device("/"); - if (root) - model = get_property(root, "model", NULL); - seq_printf(m, "machine\t\t: CHRP %s\n", model); - - /* longtrail (goldengate) stuff */ - if (!strncmp(model, "IBM,LongTrail", 13)) { - /* VLSI VAS96011/12 `Golden Gate 2' */ - /* Memory banks */ - sdramen = (in_le32(gg2_pci_config_base + GG2_PCI_DRAM_CTRL) - >>31) & 1; - for (i = 0; i < (sdramen ? 4 : 6); i++) { - t = in_le32(gg2_pci_config_base+ - GG2_PCI_DRAM_BANK0+ - i*4); - if (!(t & 1)) - continue; - switch ((t>>8) & 0x1f) { - case 0x1f: - model = "4 MB"; - break; - case 0x1e: - model = "8 MB"; - break; - case 0x1c: - model = "16 MB"; - break; - case 0x18: - model = "32 MB"; - break; - case 0x10: - model = "64 MB"; - break; - case 0x00: - model = "128 MB"; - break; - default: - model = "Reserved"; - break; - } - seq_printf(m, "memory bank %d\t: %s %s\n", i, model, - gg2_memtypes[sdramen ? 1 : ((t>>1) & 3)]); - } - /* L2 cache */ - t = in_le32(gg2_pci_config_base+GG2_PCI_CC_CTRL); - seq_printf(m, "board l2\t: %s %s (%s)\n", - gg2_cachesizes[(t>>7) & 3], - gg2_cachetypes[(t>>2) & 3], - gg2_cachemodes[t & 3]); - } - return 0; -} - -/* - * Fixes for the National Semiconductor PC78308VUL SuperI/O - * - * Some versions of Open Firmware incorrectly initialize the IRQ settings - * for keyboard and mouse - */ -static inline void __init sio_write(u8 val, u8 index) -{ - outb(index, 0x15c); - outb(val, 0x15d); -} - -static inline u8 __init sio_read(u8 index) -{ - outb(index, 0x15c); - return inb(0x15d); -} - -static void __init sio_fixup_irq(const char *name, u8 device, u8 level, - u8 type) -{ - u8 level0, type0, active; - - /* select logical device */ - sio_write(device, 0x07); - active = sio_read(0x30); - level0 = sio_read(0x70); - type0 = sio_read(0x71); - if (level0 != level || type0 != type || !active) { - printk(KERN_WARNING "sio: %s irq level %d, type %d, %sactive: " - "remapping to level %d, type %d, active\n", - name, level0, type0, !active ? "in" : "", level, type); - sio_write(0x01, 0x30); - sio_write(level, 0x70); - sio_write(type, 0x71); - } -} - -static void __init sio_init(void) -{ - struct device_node *root; - - if ((root = find_path_device("/")) && - !strncmp(get_property(root, "model", NULL), "IBM,LongTrail", 13)) { - /* logical device 0 (KBC/Keyboard) */ - sio_fixup_irq("keyboard", 0, 1, 2); - /* select logical device 1 (KBC/Mouse) */ - sio_fixup_irq("mouse", 1, 12, 2); - } -} - - -static void __init pegasos_set_l2cr(void) -{ - struct device_node *np; - - /* On Pegasos, enable the l2 cache if needed, as the OF forgets it */ - if (_chrp_type != _CHRP_Pegasos) - return; - - /* Enable L2 cache if needed */ - np = find_type_devices("cpu"); - if (np != NULL) { - unsigned int *l2cr = (unsigned int *) - get_property (np, "l2cr", NULL); - if (l2cr == NULL) { - printk ("Pegasos l2cr : no cpu l2cr property found\n"); - return; - } - if (!((*l2cr) & 0x80000000)) { - printk ("Pegasos l2cr : L2 cache was not active, " - "activating\n"); - _set_L2CR(0); - _set_L2CR((*l2cr) | 0x80000000); - } - } -} - -void __init chrp_setup_arch(void) -{ - struct device_node *device; - - /* init to some ~sane value until calibrate_delay() runs */ - loops_per_jiffy = 50000000/HZ; - -#ifdef CONFIG_BLK_DEV_INITRD - /* this is fine for chrp */ - initrd_below_start_ok = 1; - - if (initrd_start) - ROOT_DEV = Root_RAM0; - else -#endif - ROOT_DEV = Root_SDA2; /* sda2 (sda1 is for the kernel) */ - - /* On pegasos, enable the L2 cache if not already done by OF */ - pegasos_set_l2cr(); - - /* Lookup PCI host bridges */ - chrp_find_bridges(); - -#ifndef CONFIG_PPC64BRIDGE - /* - * Temporary fixes for PCI devices. - * -- Geert - */ - hydra_init(); /* Mac I/O */ - -#endif /* CONFIG_PPC64BRIDGE */ - - /* - * Fix the Super I/O configuration - */ - sio_init(); - - /* Get the event scan rate for the rtas so we know how - * often it expects a heartbeat. -- Cort - */ - if ( rtas_data ) { - struct property *p; - device = find_devices("rtas"); - for ( p = device->properties; - p && strncmp(p->name, "rtas-event-scan-rate", 20); - p = p->next ) - /* nothing */ ; - if ( p && *(unsigned long *)p->value ) { - ppc_md.heartbeat = chrp_event_scan; - ppc_md.heartbeat_reset = (HZ/(*(unsigned long *)p->value)*30)-1; - ppc_md.heartbeat_count = 1; - printk("RTAS Event Scan Rate: %lu (%lu jiffies)\n", - *(unsigned long *)p->value, ppc_md.heartbeat_reset ); - } - } - - pci_create_OF_bus_map(); -} - -void -chrp_event_scan(void) -{ - unsigned char log[1024]; - unsigned long ret = 0; - /* XXX: we should loop until the hardware says no more error logs -- Cort */ - call_rtas( "event-scan", 4, 1, &ret, 0xffffffff, 0, - __pa(log), 1024 ); - ppc_md.heartbeat_count = ppc_md.heartbeat_reset; -} - -void -chrp_restart(char *cmd) -{ - printk("RTAS system-reboot returned %d\n", - call_rtas("system-reboot", 0, 1, NULL)); - for (;;); -} - -void -chrp_power_off(void) -{ - /* allow power on only with power button press */ - printk("RTAS power-off returned %d\n", - call_rtas("power-off", 2, 1, NULL,0xffffffff,0xffffffff)); - for (;;); -} - -void -chrp_halt(void) -{ - chrp_power_off(); -} - -/* - * Finds the open-pic node and sets OpenPIC_Addr based on its reg property. - * Then checks if it has an interrupt-ranges property. If it does then - * we have a distributed open-pic, so call openpic_set_sources to tell - * the openpic code where to find the interrupt source registers. - */ -static void __init chrp_find_openpic(void) -{ - struct device_node *np; - int len, i; - unsigned int *iranges; - void __iomem *isu; - - np = find_type_devices("open-pic"); - if (np == NULL || np->n_addrs == 0) - return; - printk(KERN_INFO "OpenPIC at %x (size %x)\n", - np->addrs[0].address, np->addrs[0].size); - OpenPIC_Addr = ioremap(np->addrs[0].address, 0x40000); - if (OpenPIC_Addr == NULL) { - printk(KERN_ERR "Failed to map OpenPIC!\n"); - return; - } - - iranges = (unsigned int *) get_property(np, "interrupt-ranges", &len); - if (iranges == NULL || len < 2 * sizeof(unsigned int)) - return; /* not distributed */ - - /* - * The first pair of cells in interrupt-ranges refers to the - * IDU; subsequent pairs refer to the ISUs. - */ - len /= 2 * sizeof(unsigned int); - if (np->n_addrs < len) { - printk(KERN_ERR "Insufficient addresses for distributed" - " OpenPIC (%d < %d)\n", np->n_addrs, len); - return; - } - if (iranges[1] != 0) { - printk(KERN_INFO "OpenPIC irqs %d..%d in IDU\n", - iranges[0], iranges[0] + iranges[1] - 1); - openpic_set_sources(iranges[0], iranges[1], NULL); - } - for (i = 1; i < len; ++i) { - iranges += 2; - printk(KERN_INFO "OpenPIC irqs %d..%d in ISU at %x (%x)\n", - iranges[0], iranges[0] + iranges[1] - 1, - np->addrs[i].address, np->addrs[i].size); - isu = ioremap(np->addrs[i].address, np->addrs[i].size); - if (isu != NULL) - openpic_set_sources(iranges[0], iranges[1], isu); - else - printk(KERN_ERR "Failed to map OpenPIC ISU at %x!\n", - np->addrs[i].address); - } -} - -#if defined(CONFIG_VT) && defined(CONFIG_INPUT_ADBHID) && defined(XMON) -static struct irqaction xmon_irqaction = { - .handler = xmon_irq, - .mask = CPU_MASK_NONE, - .name = "XMON break", -}; -#endif - -void __init chrp_init_IRQ(void) -{ - struct device_node *np; - unsigned long chrp_int_ack = 0; - unsigned char init_senses[NR_IRQS - NUM_8259_INTERRUPTS]; -#if defined(CONFIG_VT) && defined(CONFIG_INPUT_ADBHID) && defined(XMON) - struct device_node *kbd; -#endif - - for (np = find_devices("pci"); np != NULL; np = np->next) { - unsigned int *addrp = (unsigned int *) - get_property(np, "8259-interrupt-acknowledge", NULL); - - if (addrp == NULL) - continue; - chrp_int_ack = addrp[prom_n_addr_cells(np)-1]; - break; - } - if (np == NULL) - printk(KERN_ERR "Cannot find PCI interrupt acknowledge address\n"); - - chrp_find_openpic(); - - if (OpenPIC_Addr) { - prom_get_irq_senses(init_senses, NUM_8259_INTERRUPTS, NR_IRQS); - OpenPIC_InitSenses = init_senses; - OpenPIC_NumInitSenses = NR_IRQS - NUM_8259_INTERRUPTS; - - openpic_init(NUM_8259_INTERRUPTS); - /* We have a cascade on OpenPIC IRQ 0, Linux IRQ 16 */ - openpic_hookup_cascade(NUM_8259_INTERRUPTS, "82c59 cascade", - i8259_irq); - - } - i8259_init(chrp_int_ack, 0); - -#if defined(CONFIG_VT) && defined(CONFIG_INPUT_ADBHID) && defined(XMON) - /* see if there is a keyboard in the device tree - with a parent of type "adb" */ - for (kbd = find_devices("keyboard"); kbd; kbd = kbd->next) - if (kbd->parent && kbd->parent->type - && strcmp(kbd->parent->type, "adb") == 0) - break; - if (kbd) - setup_irq(HYDRA_INT_ADB_NMI, &xmon_irqaction); -#endif -} - -void __init -chrp_init2(void) -{ -#ifdef CONFIG_NVRAM - chrp_nvram_init(); -#endif - - request_region(0x20,0x20,"pic1"); - request_region(0xa0,0x20,"pic2"); - request_region(0x00,0x20,"dma1"); - request_region(0x40,0x20,"timer"); - request_region(0x80,0x10,"dma page reg"); - request_region(0xc0,0x20,"dma2"); - - if (ppc_md.progress) - ppc_md.progress(" Have fun! ", 0x7777); -} - -static struct device_node *memory_node; - -static int __init get_mem_prop(char *name, struct mem_pieces *mp) -{ - struct reg_property *rp; - int i, s; - unsigned int *ip; - int nac = prom_n_addr_cells(memory_node); - int nsc = prom_n_size_cells(memory_node); - - ip = (unsigned int *) get_property(memory_node, name, &s); - if (ip == NULL) { - printk(KERN_ERR "error: couldn't get %s property on /memory\n", - name); - return 0; - } - s /= (nsc + nac) * 4; - rp = mp->regions; - for (i = 0; i < s; ++i, ip += nac+nsc) { - if (nac >= 2 && ip[nac-2] != 0) - continue; - rp->address = ip[nac-1]; - if (nsc >= 2 && ip[nac+nsc-2] != 0) - rp->size = ~0U; - else - rp->size = ip[nac+nsc-1]; - ++rp; - } - mp->n_regions = rp - mp->regions; - - /* Make sure the pieces are sorted. */ - mem_pieces_sort(mp); - mem_pieces_coalesce(mp); - return 1; -} - -static unsigned long __init chrp_find_end_of_memory(void) -{ - unsigned long a, total; - struct mem_pieces phys_mem; - - /* - * Find out where physical memory is, and check that it - * starts at 0 and is contiguous. It seems that RAM is - * always physically contiguous on Power Macintoshes. - * - * Supporting discontiguous physical memory isn't hard, - * it just makes the virtual <-> physical mapping functions - * more complicated (or else you end up wasting space - * in mem_map). - */ - memory_node = find_devices("memory"); - if (memory_node == NULL || !get_mem_prop("reg", &phys_mem) - || phys_mem.n_regions == 0) - panic("No RAM??"); - a = phys_mem.regions[0].address; - if (a != 0) - panic("RAM doesn't start at physical address 0"); - total = phys_mem.regions[0].size; - - if (phys_mem.n_regions > 1) { - printk("RAM starting at 0x%x is not contiguous\n", - phys_mem.regions[1].address); - printk("Using RAM from 0 to 0x%lx\n", total-1); - } - - return total; -} - -void __init -chrp_init(unsigned long r3, unsigned long r4, unsigned long r5, - unsigned long r6, unsigned long r7) -{ - struct device_node *root = find_path_device ("/"); - char *machine = NULL; - -#ifdef CONFIG_BLK_DEV_INITRD - /* take care of initrd if we have one */ - if ( r6 ) - { - initrd_start = r6 + KERNELBASE; - initrd_end = r6 + r7 + KERNELBASE; - } -#endif /* CONFIG_BLK_DEV_INITRD */ - - ISA_DMA_THRESHOLD = ~0L; - DMA_MODE_READ = 0x44; - DMA_MODE_WRITE = 0x48; - isa_io_base = CHRP_ISA_IO_BASE; /* default value */ - ppc_do_canonicalize_irqs = 1; - - if (root) - machine = get_property(root, "model", NULL); - if (machine && strncmp(machine, "Pegasos", 7) == 0) { - _chrp_type = _CHRP_Pegasos; - } else if (machine && strncmp(machine, "IBM", 3) == 0) { - _chrp_type = _CHRP_IBM; - } else if (machine && strncmp(machine, "MOT", 3) == 0) { - _chrp_type = _CHRP_Motorola; - } else { - /* Let's assume it is an IBM chrp if all else fails */ - _chrp_type = _CHRP_IBM; - } - - ppc_md.setup_arch = chrp_setup_arch; - ppc_md.show_percpuinfo = of_show_percpuinfo; - ppc_md.show_cpuinfo = chrp_show_cpuinfo; - - ppc_md.init_IRQ = chrp_init_IRQ; - if (_chrp_type == _CHRP_Pegasos) - ppc_md.get_irq = i8259_irq; - else - ppc_md.get_irq = openpic_get_irq; - - ppc_md.init = chrp_init2; - - ppc_md.phys_mem_access_prot = pci_phys_mem_access_prot; - - ppc_md.restart = chrp_restart; - ppc_md.power_off = chrp_power_off; - ppc_md.halt = chrp_halt; - - ppc_md.time_init = chrp_time_init; - ppc_md.set_rtc_time = chrp_set_rtc_time; - ppc_md.get_rtc_time = chrp_get_rtc_time; - ppc_md.calibrate_decr = chrp_calibrate_decr; - - ppc_md.find_end_of_memory = chrp_find_end_of_memory; - - if (rtas_data) { - struct device_node *rtas; - unsigned int *p; - - rtas = find_devices("rtas"); - if (rtas != NULL) { - if (get_property(rtas, "display-character", NULL)) { - ppc_md.progress = rtas_display_progress; - p = (unsigned int *) get_property - (rtas, "ibm,display-line-length", NULL); - if (p) - max_width = *p; - } else if (get_property(rtas, "set-indicator", NULL)) - ppc_md.progress = rtas_indicator_progress; - } - } -#ifdef CONFIG_BOOTX_TEXT - if (ppc_md.progress == NULL && boot_text_mapped) - ppc_md.progress = btext_progress; -#endif - -#ifdef CONFIG_SMP - smp_ops = &chrp_smp_ops; -#endif /* CONFIG_SMP */ - - /* - * Print the banner, then scroll down so boot progress - * can be printed. -- Cort - */ - if (ppc_md.progress) ppc_md.progress("Linux/PPC "UTS_RELEASE"\n", 0x0); -} - -void -rtas_display_progress(char *s, unsigned short hex) -{ - int width; - char *os = s; - - if ( call_rtas( "display-character", 1, 1, NULL, '\r' ) ) - return; - - width = max_width; - while ( *os ) - { - if ( (*os == '\n') || (*os == '\r') ) - width = max_width; - else - width--; - call_rtas( "display-character", 1, 1, NULL, *os++ ); - /* if we overwrite the screen length */ - if ( width == 0 ) - while ( (*os != 0) && (*os != '\n') && (*os != '\r') ) - os++; - } - - /*while ( width-- > 0 )*/ - call_rtas( "display-character", 1, 1, NULL, ' ' ); -} - -void -rtas_indicator_progress(char *s, unsigned short hex) -{ - call_rtas("set-indicator", 3, 1, NULL, 6, 0, hex); -} - -#ifdef CONFIG_BOOTX_TEXT -void -btext_progress(char *s, unsigned short hex) -{ - prom_print(s); - prom_print("\n"); -} -#endif /* CONFIG_BOOTX_TEXT */ diff --git a/arch/ppc/platforms/chrp_smp.c b/arch/ppc/platforms/chrp_smp.c deleted file mode 100644 index 97e539557ec..00000000000 --- a/arch/ppc/platforms/chrp_smp.c +++ /dev/null @@ -1,99 +0,0 @@ -/* - * Smp support for CHRP machines. - * - * Written by Cort Dougan (cort@cs.nmt.edu) borrowing a great - * deal of code from the sparc and intel versions. - * - * Copyright (C) 1999 Cort Dougan <cort@cs.nmt.edu> - * - */ - -#include <linux/config.h> -#include <linux/kernel.h> -#include <linux/sched.h> -#include <linux/smp.h> -#include <linux/smp_lock.h> -#include <linux/interrupt.h> -#include <linux/kernel_stat.h> -#include <linux/delay.h> -#include <linux/init.h> -#include <linux/spinlock.h> - -#include <asm/ptrace.h> -#include <asm/atomic.h> -#include <asm/irq.h> -#include <asm/page.h> -#include <asm/pgtable.h> -#include <asm/sections.h> -#include <asm/io.h> -#include <asm/prom.h> -#include <asm/smp.h> -#include <asm/residual.h> -#include <asm/time.h> -#include <asm/open_pic.h> -#include <asm/machdep.h> - -extern unsigned long smp_chrp_cpu_nr; - -static int __init -smp_chrp_probe(void) -{ - if (smp_chrp_cpu_nr > 1) - openpic_request_IPIs(); - - return smp_chrp_cpu_nr; -} - -static void __devinit -smp_chrp_kick_cpu(int nr) -{ - *(unsigned long *)KERNELBASE = nr; - asm volatile("dcbf 0,%0"::"r"(KERNELBASE):"memory"); -} - -static void __devinit -smp_chrp_setup_cpu(int cpu_nr) -{ - if (OpenPIC_Addr) - do_openpic_setup_cpu(); -} - -static DEFINE_SPINLOCK(timebase_lock); -static unsigned int timebase_upper = 0, timebase_lower = 0; - -void __devinit -smp_chrp_give_timebase(void) -{ - spin_lock(&timebase_lock); - call_rtas("freeze-time-base", 0, 1, NULL); - timebase_upper = get_tbu(); - timebase_lower = get_tbl(); - spin_unlock(&timebase_lock); - - while (timebase_upper || timebase_lower) - barrier(); - call_rtas("thaw-time-base", 0, 1, NULL); -} - -void __devinit -smp_chrp_take_timebase(void) -{ - while (!(timebase_upper || timebase_lower)) - barrier(); - spin_lock(&timebase_lock); - set_tb(timebase_upper, timebase_lower); - timebase_upper = 0; - timebase_lower = 0; - spin_unlock(&timebase_lock); - printk("CPU %i taken timebase\n", smp_processor_id()); -} - -/* CHRP with openpic */ -struct smp_ops_t chrp_smp_ops = { - .message_pass = smp_openpic_message_pass, - .probe = smp_chrp_probe, - .kick_cpu = smp_chrp_kick_cpu, - .setup_cpu = smp_chrp_setup_cpu, - .give_timebase = smp_chrp_give_timebase, - .take_timebase = smp_chrp_take_timebase, -}; diff --git a/arch/ppc/platforms/chrp_time.c b/arch/ppc/platforms/chrp_time.c deleted file mode 100644 index c8627770af1..00000000000 --- a/arch/ppc/platforms/chrp_time.c +++ /dev/null @@ -1,251 +0,0 @@ -/* - * Copyright (C) 1991, 1992, 1995 Linus Torvalds - * - * Adapted for PowerPC (PReP) by Gary Thomas - * Modified by Cort Dougan (cort@cs.nmt.edu). - * Copied and modified from arch/i386/kernel/time.c - * - */ -#include <linux/errno.h> -#include <linux/sched.h> -#include <linux/kernel.h> -#include <linux/param.h> -#include <linux/string.h> -#include <linux/mm.h> -#include <linux/interrupt.h> -#include <linux/time.h> -#include <linux/timex.h> -#include <linux/kernel_stat.h> -#include <linux/mc146818rtc.h> -#include <linux/init.h> -#include <linux/bcd.h> - -#include <asm/io.h> -#include <asm/nvram.h> -#include <asm/prom.h> -#include <asm/sections.h> -#include <asm/time.h> - -extern spinlock_t rtc_lock; - -static int nvram_as1 = NVRAM_AS1; -static int nvram_as0 = NVRAM_AS0; -static int nvram_data = NVRAM_DATA; - -long __init chrp_time_init(void) -{ - struct device_node *rtcs; - int base; - - rtcs = find_compatible_devices("rtc", "pnpPNP,b00"); - if (rtcs == NULL) - rtcs = find_compatible_devices("rtc", "ds1385-rtc"); - if (rtcs == NULL || rtcs->addrs == NULL) - return 0; - base = rtcs->addrs[0].address; - nvram_as1 = 0; - nvram_as0 = base; - nvram_data = base + 1; - - return 0; -} - -int chrp_cmos_clock_read(int addr) -{ - if (nvram_as1 != 0) - outb(addr>>8, nvram_as1); - outb(addr, nvram_as0); - return (inb(nvram_data)); -} - -void chrp_cmos_clock_write(unsigned long val, int addr) -{ - if (nvram_as1 != 0) - outb(addr>>8, nvram_as1); - outb(addr, nvram_as0); - outb(val, nvram_data); - return; -} - -/* - * Set the hardware clock. -- Cort - */ -int chrp_set_rtc_time(unsigned long nowtime) -{ - unsigned char save_control, save_freq_select; - struct rtc_time tm; - - spin_lock(&rtc_lock); - to_tm(nowtime, &tm); - - save_control = chrp_cmos_clock_read(RTC_CONTROL); /* tell the clock it's being set */ - - chrp_cmos_clock_write((save_control|RTC_SET), RTC_CONTROL); - - save_freq_select = chrp_cmos_clock_read(RTC_FREQ_SELECT); /* stop and reset prescaler */ - - chrp_cmos_clock_write((save_freq_select|RTC_DIV_RESET2), RTC_FREQ_SELECT); - - tm.tm_year -= 1900; - if (!(save_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD) { - BIN_TO_BCD(tm.tm_sec); - BIN_TO_BCD(tm.tm_min); - BIN_TO_BCD(tm.tm_hour); - BIN_TO_BCD(tm.tm_mon); - BIN_TO_BCD(tm.tm_mday); - BIN_TO_BCD(tm.tm_year); - } - chrp_cmos_clock_write(tm.tm_sec,RTC_SECONDS); - chrp_cmos_clock_write(tm.tm_min,RTC_MINUTES); - chrp_cmos_clock_write(tm.tm_hour,RTC_HOURS); - chrp_cmos_clock_write(tm.tm_mon,RTC_MONTH); - chrp_cmos_clock_write(tm.tm_mday,RTC_DAY_OF_MONTH); - chrp_cmos_clock_write(tm.tm_year,RTC_YEAR); - - /* The following flags have to be released exactly in this order, - * otherwise the DS12887 (popular MC146818A clone with integrated - * battery and quartz) will not reset the oscillator and will not - * update precisely 500 ms later. You won't find this mentioned in - * the Dallas Semiconductor data sheets, but who believes data - * sheets anyway ... -- Markus Kuhn - */ - chrp_cmos_clock_write(save_control, RTC_CONTROL); - chrp_cmos_clock_write(save_freq_select, RTC_FREQ_SELECT); - - spin_unlock(&rtc_lock); - return 0; -} - -unsigned long chrp_get_rtc_time(void) -{ - unsigned int year, mon, day, hour, min, sec; - int uip, i; - - /* The Linux interpretation of the CMOS clock register contents: - * When the Update-In-Progress (UIP) flag goes from 1 to 0, the - * RTC registers show the second which has precisely just started. - * Let's hope other operating systems interpret the RTC the same way. - */ - - /* Since the UIP flag is set for about 2.2 ms and the clock - * is typically written with a precision of 1 jiffy, trying - * to obtain a precision better than a few milliseconds is - * an illusion. Only consistency is interesting, this also - * allows to use the routine for /dev/rtc without a potential - * 1 second kernel busy loop triggered by any reader of /dev/rtc. - */ - - for ( i = 0; i<1000000; i++) { - uip = chrp_cmos_clock_read(RTC_FREQ_SELECT); - sec = chrp_cmos_clock_read(RTC_SECONDS); - min = chrp_cmos_clock_read(RTC_MINUTES); - hour = chrp_cmos_clock_read(RTC_HOURS); - day = chrp_cmos_clock_read(RTC_DAY_OF_MONTH); - mon = chrp_cmos_clock_read(RTC_MONTH); - year = chrp_cmos_clock_read(RTC_YEAR); - uip |= chrp_cmos_clock_read(RTC_FREQ_SELECT); - if ((uip & RTC_UIP)==0) break; - } - - if (!(chrp_cmos_clock_read(RTC_CONTROL) & RTC_DM_BINARY) || RTC_ALWAYS_BCD) - { - BCD_TO_BIN(sec); - BCD_TO_BIN(min); - BCD_TO_BIN(hour); - BCD_TO_BIN(day); - BCD_TO_BIN(mon); - BCD_TO_BIN(year); - } - if ((year += 1900) < 1970) - year += 100; - return mktime(year, mon, day, hour, min, sec); -} - -/* - * Calibrate the decrementer frequency with the VIA timer 1. - */ -#define VIA_TIMER_FREQ_6 4700000 /* time 1 frequency * 6 */ - -/* VIA registers */ -#define RS 0x200 /* skip between registers */ -#define T1CL (4*RS) /* Timer 1 ctr/latch (low 8 bits) */ -#define T1CH (5*RS) /* Timer 1 counter (high 8 bits) */ -#define T1LL (6*RS) /* Timer 1 latch (low 8 bits) */ -#define T1LH (7*RS) /* Timer 1 latch (high 8 bits) */ -#define ACR (11*RS) /* Auxiliary control register */ -#define IFR (13*RS) /* Interrupt flag register */ - -/* Bits in ACR */ -#define T1MODE 0xc0 /* Timer 1 mode */ -#define T1MODE_CONT 0x40 /* continuous interrupts */ - -/* Bits in IFR and IER */ -#define T1_INT 0x40 /* Timer 1 interrupt */ - -static int __init chrp_via_calibrate_decr(void) -{ - struct device_node *vias; - volatile unsigned char __iomem *via; - int count = VIA_TIMER_FREQ_6 / 100; - unsigned int dstart, dend; - - vias = find_devices("via-cuda"); - if (vias == 0) - vias = find_devices("via"); - if (vias == 0 || vias->n_addrs == 0) - return 0; - via = ioremap(vias->addrs[0].address, vias->addrs[0].size); - - /* set timer 1 for continuous interrupts */ - out_8(&via[ACR], (via[ACR] & ~T1MODE) | T1MODE_CONT); - /* set the counter to a small value */ - out_8(&via[T1CH], 2); - /* set the latch to `count' */ - out_8(&via[T1LL], count); - out_8(&via[T1LH], count >> 8); - /* wait until it hits 0 */ - while ((in_8(&via[IFR]) & T1_INT) == 0) - ; - dstart = get_dec(); - /* clear the interrupt & wait until it hits 0 again */ - in_8(&via[T1CL]); - while ((in_8(&via[IFR]) & T1_INT) == 0) - ; - dend = get_dec(); - - tb_ticks_per_jiffy = (dstart - dend) / ((6 * HZ)/100); - tb_to_us = mulhwu_scale_factor(dstart - dend, 60000); - - printk(KERN_INFO "via_calibrate_decr: ticks per jiffy = %u (%u ticks)\n", - tb_ticks_per_jiffy, dstart - dend); - - iounmap(via); - - return 1; -} - -void __init chrp_calibrate_decr(void) -{ - struct device_node *cpu; - unsigned int freq, *fp; - - if (chrp_via_calibrate_decr()) - return; - - /* - * The cpu node should have a timebase-frequency property - * to tell us the rate at which the decrementer counts. - */ - freq = 16666000; /* hardcoded default */ - cpu = find_type_devices("cpu"); - if (cpu != 0) { - fp = (unsigned int *) - get_property(cpu, "timebase-frequency", NULL); - if (fp != 0) - freq = *fp; - } - printk("time_init: decrementer frequency = %u.%.6u MHz\n", - freq/1000000, freq%1000000); - tb_ticks_per_jiffy = freq / HZ; - tb_to_us = mulhwu_scale_factor(freq, 1000000); -} diff --git a/arch/ppc/syslib/Makefile b/arch/ppc/syslib/Makefile index 5cb62c6a51c..490749ca88f 100644 --- a/arch/ppc/syslib/Makefile +++ b/arch/ppc/syslib/Makefile @@ -38,8 +38,6 @@ endif obj-$(CONFIG_8xx) += m8xx_setup.o ppc8xx_pic.o $(wdt-mpc8xx-y) \ ppc_sys.o mpc8xx_devices.o mpc8xx_sys.o obj-$(CONFIG_PCI_QSPAN) += qspan_pci.o -obj-$(CONFIG_PPC_OF) += prom_init.o prom.o -obj-$(CONFIG_PPC_CHRP) += open_pic.o obj-$(CONFIG_PPC_PREP) += open_pic.o todc_time.o obj-$(CONFIG_BAMBOO) += pci_auto.o todc_time.o obj-$(CONFIG_CPCI690) += todc_time.o pci_auto.o diff --git a/arch/ppc/syslib/open_pic.c b/arch/ppc/syslib/open_pic.c index 38e5b93fbe4..70456c8f998 100644 --- a/arch/ppc/syslib/open_pic.c +++ b/arch/ppc/syslib/open_pic.c @@ -216,7 +216,7 @@ static void openpic_safe_writefield(volatile u_int __iomem *addr, u_int mask, u_int openpic_read_IPI(volatile u_int __iomem * addr) { u_int val = 0; -#if defined(OPENPIC_BIG_ENDIAN) || defined(CONFIG_POWER3) +#if defined(OPENPIC_BIG_ENDIAN) val = in_be32(addr); #else val = in_le32(addr); diff --git a/arch/ppc/syslib/prom.c b/arch/ppc/syslib/prom.c deleted file mode 100644 index 482f837fd37..00000000000 --- a/arch/ppc/syslib/prom.c +++ /dev/null @@ -1,1429 +0,0 @@ -/* - * Procedures for interfacing to the Open Firmware PROM on - * Power Macintosh computers. - * - * In particular, we are interested in the device tree - * and in using some of its services (exit, write to stdout). - * - * Paul Mackerras August 1996. - * Copyright (C) 1996 Paul Mackerras. - */ -#include <stdarg.h> -#include <linux/config.h> -#include <linux/kernel.h> -#include <linux/string.h> -#include <linux/init.h> -#include <linux/threads.h> -#include <linux/spinlock.h> -#include <linux/ioport.h> -#include <linux/pci.h> -#include <linux/slab.h> -#include <linux/bitops.h> - -#include <asm/sections.h> -#include <asm/prom.h> -#include <asm/page.h> -#include <asm/processor.h> -#include <asm/irq.h> -#include <asm/io.h> -#include <asm/smp.h> -#include <asm/bootx.h> -#include <asm/system.h> -#include <asm/mmu.h> -#include <asm/pgtable.h> -#include <asm/bootinfo.h> -#include <asm/btext.h> -#include <asm/pci-bridge.h> -#include <asm/open_pic.h> - - -struct pci_address { - unsigned a_hi; - unsigned a_mid; - unsigned a_lo; -}; - -struct pci_reg_property { - struct pci_address addr; - unsigned size_hi; - unsigned size_lo; -}; - -struct isa_reg_property { - unsigned space; - unsigned address; - unsigned size; -}; - -typedef unsigned long interpret_func(struct device_node *, unsigned long, - int, int); -static interpret_func interpret_pci_props; -static interpret_func interpret_dbdma_props; -static interpret_func interpret_isa_props; -static interpret_func interpret_macio_props; -static interpret_func interpret_root_props; - -extern char *klimit; - -/* Set for a newworld or CHRP machine */ -int use_of_interrupt_tree; -struct device_node *dflt_interrupt_controller; -int num_interrupt_controllers; - -extern unsigned int rtas_entry; /* physical pointer */ - -extern struct device_node *allnodes; - -static unsigned long finish_node(struct device_node *, unsigned long, - interpret_func *, int, int); -static unsigned long finish_node_interrupts(struct device_node *, unsigned long); -static struct device_node *find_phandle(phandle); - -extern void enter_rtas(void *); -void phys_call_rtas(int, int, int, ...); - -extern char cmd_line[512]; /* XXX */ -extern boot_infos_t *boot_infos; -unsigned long dev_tree_size; - -void -phys_call_rtas(int service, int nargs, int nret, ...) -{ - va_list list; - union { - unsigned long words[16]; - double align; - } u; - void (*rtas)(void *, unsigned long); - int i; - - u.words[0] = service; - u.words[1] = nargs; - u.words[2] = nret; - va_start(list, nret); - for (i = 0; i < nargs; ++i) - u.words[i+3] = va_arg(list, unsigned long); - va_end(list); - - rtas = (void (*)(void *, unsigned long)) rtas_entry; - rtas(&u, rtas_data); -} - -/* - * finish_device_tree is called once things are running normally - * (i.e. with text and data mapped to the address they were linked at). - * It traverses the device tree and fills in the name, type, - * {n_}addrs and {n_}intrs fields of each node. - */ -void __init -finish_device_tree(void) -{ - unsigned long mem = (unsigned long) klimit; - struct device_node *np; - - /* All CHRPs now use the interrupt tree */ - for (np = allnodes; np != NULL; np = np->allnext) { - if (get_property(np, "interrupt-parent", NULL)) { - use_of_interrupt_tree = 1; - break; - } - } - - if (use_of_interrupt_tree) { - /* - * We want to find out here how many interrupt-controller - * nodes there are, and if we are booted from BootX, - * we need a pointer to the first (and hopefully only) - * such node. But we can't use find_devices here since - * np->name has not been set yet. -- paulus - */ - int n = 0; - char *name, *ic; - int iclen; - - for (np = allnodes; np != NULL; np = np->allnext) { - ic = get_property(np, "interrupt-controller", &iclen); - name = get_property(np, "name", NULL); - /* checking iclen makes sure we don't get a false - match on /chosen.interrupt_controller */ - if ((name != NULL - && strcmp(name, "interrupt-controller") == 0) - || (ic != NULL && iclen == 0 && strcmp(name, "AppleKiwi"))) { - if (n == 0) - dflt_interrupt_controller = np; - ++n; - } - } - num_interrupt_controllers = n; - } - - mem = finish_node(allnodes, mem, NULL, 1, 1); - dev_tree_size = mem - (unsigned long) allnodes; - klimit = (char *) mem; -} - -static unsigned long __init -finish_node(struct device_node *np, unsigned long mem_start, - interpret_func *ifunc, int naddrc, int nsizec) -{ - struct device_node *child; - int *ip; - - np->name = get_property(np, "name", NULL); - np->type = get_property(np, "device_type", NULL); - - if (!np->name) - np->name = "<NULL>"; - if (!np->type) - np->type = "<NULL>"; - - /* get the device addresses and interrupts */ - if (ifunc != NULL) - mem_start = ifunc(np, mem_start, naddrc, nsizec); - - if (use_of_interrupt_tree) - mem_start = finish_node_interrupts(np, mem_start); - - /* Look for #address-cells and #size-cells properties. */ - ip = (int *) get_property(np, "#address-cells", NULL); - if (ip != NULL) - naddrc = *ip; - ip = (int *) get_property(np, "#size-cells", NULL); - if (ip != NULL) - nsizec = *ip; - - if (np->parent == NULL) - ifunc = interpret_root_props; - else if (np->type == 0) - ifunc = NULL; - else if (!strcmp(np->type, "pci") || !strcmp(np->type, "vci")) - ifunc = interpret_pci_props; - else if (!strcmp(np->type, "dbdma")) - ifunc = interpret_dbdma_props; - else if (!strcmp(np->type, "mac-io") - || ifunc == interpret_macio_props) - ifunc = interpret_macio_props; - else if (!strcmp(np->type, "isa")) - ifunc = interpret_isa_props; - else if (!strcmp(np->name, "uni-n") || !strcmp(np->name, "u3")) - ifunc = interpret_root_props; - else if (!((ifunc == interpret_dbdma_props - || ifunc == interpret_macio_props) - && (!strcmp(np->type, "escc") - || !strcmp(np->type, "media-bay")))) - ifunc = NULL; - - /* if we were booted from BootX, convert the full name */ - if (boot_infos - && strncmp(np->full_name, "Devices:device-tree", 19) == 0) { - if (np->full_name[19] == 0) { - strcpy(np->full_name, "/"); - } else if (np->full_name[19] == ':') { - char *p = np->full_name + 19; - np->full_name = p; - for (; *p; ++p) - if (*p == ':') - *p = '/'; - } - } - - for (child = np->child; child != NULL; child = child->sibling) - mem_start = finish_node(child, mem_start, ifunc, - naddrc, nsizec); - - return mem_start; -} - -/* - * Find the interrupt parent of a node. - */ -static struct device_node * __init -intr_parent(struct device_node *p) -{ - phandle *parp; - - parp = (phandle *) get_property(p, "interrupt-parent", NULL); - if (parp == NULL) - return p->parent; - p = find_phandle(*parp); - if (p != NULL) - return p; - /* - * On a powermac booted with BootX, we don't get to know the - * phandles for any nodes, so find_phandle will return NULL. - * Fortunately these machines only have one interrupt controller - * so there isn't in fact any ambiguity. -- paulus - */ - if (num_interrupt_controllers == 1) - p = dflt_interrupt_controller; - return p; -} - -/* - * Find out the size of each entry of the interrupts property - * for a node. - */ -static int __init -prom_n_intr_cells(struct device_node *np) -{ - struct device_node *p; - unsigned int *icp; - - for (p = np; (p = intr_parent(p)) != NULL; ) { - icp = (unsigned int *) - get_property(p, "#interrupt-cells", NULL); - if (icp != NULL) - return *icp; - if (get_property(p, "interrupt-controller", NULL) != NULL - || get_property(p, "interrupt-map", NULL) != NULL) { - printk("oops, node %s doesn't have #interrupt-cells\n", - p->full_name); - return 1; - } - } - printk("prom_n_intr_cells failed for %s\n", np->full_name); - return 1; -} - -/* - * Map an interrupt from a device up to the platform interrupt - * descriptor. - */ -static int __init -map_interrupt(unsigned int **irq, struct device_node **ictrler, - struct device_node *np, unsigned int *ints, int nintrc) -{ - struct device_node *p, *ipar; - unsigned int *imap, *imask, *ip; - int i, imaplen, match; - int newintrc = 1, newaddrc = 1; - unsigned int *reg; - int naddrc; - - reg = (unsigned int *) get_property(np, "reg", NULL); - naddrc = prom_n_addr_cells(np); - p = intr_parent(np); - while (p != NULL) { - if (get_property(p, "interrupt-controller", NULL) != NULL) - /* this node is an interrupt controller, stop here */ - break; - imap = (unsigned int *) - get_property(p, "interrupt-map", &imaplen); - if (imap == NULL) { - p = intr_parent(p); - continue; - } - imask = (unsigned int *) - get_property(p, "interrupt-map-mask", NULL); - if (imask == NULL) { - printk("oops, %s has interrupt-map but no mask\n", - p->full_name); - return 0; - } - imaplen /= sizeof(unsigned int); - match = 0; - ipar = NULL; - while (imaplen > 0 && !match) { - /* check the child-interrupt field */ - match = 1; - for (i = 0; i < naddrc && match; ++i) - match = ((reg[i] ^ imap[i]) & imask[i]) == 0; - for (; i < naddrc + nintrc && match; ++i) - match = ((ints[i-naddrc] ^ imap[i]) & imask[i]) == 0; - imap += naddrc + nintrc; - imaplen -= naddrc + nintrc; - /* grab the interrupt parent */ - ipar = find_phandle((phandle) *imap++); - --imaplen; - if (ipar == NULL && num_interrupt_controllers == 1) - /* cope with BootX not giving us phandles */ - ipar = dflt_interrupt_controller; - if (ipar == NULL) { - printk("oops, no int parent %x in map of %s\n", - imap[-1], p->full_name); - return 0; - } - /* find the parent's # addr and intr cells */ - ip = (unsigned int *) - get_property(ipar, "#interrupt-cells", NULL); - if (ip == NULL) { - printk("oops, no #interrupt-cells on %s\n", - ipar->full_name); - return 0; - } - newintrc = *ip; - ip = (unsigned int *) - get_property(ipar, "#address-cells", NULL); - newaddrc = (ip == NULL)? 0: *ip; - imap += newaddrc + newintrc; - imaplen -= newaddrc + newintrc; - } - if (imaplen < 0) { - printk("oops, error decoding int-map on %s, len=%d\n", - p->full_name, imaplen); - return 0; - } - if (!match) { - printk("oops, no match in %s int-map for %s\n", - p->full_name, np->full_name); - return 0; - } - p = ipar; - naddrc = newaddrc; - nintrc = newintrc; - ints = imap - nintrc; - reg = ints - naddrc; - } - if (p == NULL) - printk("hmmm, int tree for %s doesn't have ctrler\n", - np->full_name); - *irq = ints; - *ictrler = p; - return nintrc; -} - -/* - * New version of finish_node_interrupts. - */ -static unsigned long __init -finish_node_interrupts(struct device_node *np, unsigned long mem_start) -{ - unsigned int *ints; - int intlen, intrcells; - int i, j, n, offset; - unsigned int *irq; - struct device_node *ic; - - ints = (unsigned int *) get_property(np, "interrupts", &intlen); - if (ints == NULL) - return mem_start; - intrcells = prom_n_intr_cells(np); - intlen /= intrcells * sizeof(unsigned int); - np->n_intrs = intlen; - np->intrs = (struct interrupt_info *) mem_start; - mem_start += intlen * sizeof(struct interrupt_info); - - for (i = 0; i < intlen; ++i) { - np->intrs[i].line = 0; - np->intrs[i].sense = 1; - n = map_interrupt(&irq, &ic, np, ints, intrcells); - if (n <= 0) - continue; - offset = 0; - /* - * On a CHRP we have an 8259 which is subordinate to - * the openpic in the interrupt tree, but we want the - * openpic's interrupt numbers offsetted, not the 8259's. - * So we apply the offset if the controller is at the - * root of the interrupt tree, i.e. has no interrupt-parent. - * This doesn't cope with the general case of multiple - * cascaded interrupt controllers, but then neither will - * irq.c at the moment either. -- paulus - * The G5 triggers that code, I add a machine test. On - * those machines, we want to offset interrupts from the - * second openpic by 128 -- BenH - */ - if (num_interrupt_controllers > 1 - && ic != NULL - && get_property(ic, "interrupt-parent", NULL) == NULL) - offset = 16; - - np->intrs[i].line = irq[0] + offset; - if (n > 1) - np->intrs[i].sense = irq[1]; - if (n > 2) { - printk("hmmm, got %d intr cells for %s:", n, - np->full_name); - for (j = 0; j < n; ++j) - printk(" %d", irq[j]); - printk("\n"); - } - ints += intrcells; - } - - return mem_start; -} - -/* - * When BootX makes a copy of the device tree from the MacOS - * Name Registry, it is in the format we use but all of the pointers - * are offsets from the start of the tree. - * This procedure updates the pointers. - */ -void __init -relocate_nodes(void) -{ - unsigned long base; - struct device_node *np; - struct property *pp; - -#define ADDBASE(x) (x = (typeof (x))((x)? ((unsigned long)(x) + base): 0)) - - base = (unsigned long) boot_infos + boot_infos->deviceTreeOffset; - allnodes = (struct device_node *)(base + 4); - for (np = allnodes; np != 0; np = np->allnext) { - ADDBASE(np->full_name); - ADDBASE(np->properties); - ADDBASE(np->parent); - ADDBASE(np->child); - ADDBASE(np->sibling); - ADDBASE(np->allnext); - for (pp = np->properties; pp != 0; pp = pp->next) { - ADDBASE(pp->name); - ADDBASE(pp->value); - ADDBASE(pp->next); - } - } -} - -int -prom_n_addr_cells(struct device_node* np) -{ - int* ip; - do { - if (np->parent) - np = np->parent; - ip = (int *) get_property(np, "#address-cells", NULL); - if (ip != NULL) - return *ip; - } while (np->parent); - /* No #address-cells property for the root node, default to 1 */ - return 1; -} - -int -prom_n_size_cells(struct device_node* np) -{ - int* ip; - do { - if (np->parent) - np = np->parent; - ip = (int *) get_property(np, "#size-cells", NULL); - if (ip != NULL) - return *ip; - } while (np->parent); - /* No #size-cells property for the root node, default to 1 */ - return 1; -} - -static unsigned long __init -map_addr(struct device_node *np, unsigned long space, unsigned long addr) -{ - int na; - unsigned int *ranges; - int rlen = 0; - unsigned int type; - - type = (space >> 24) & 3; - if (type == 0) - return addr; - - while ((np = np->parent) != NULL) { - if (strcmp(np->type, "pci") != 0) - continue; - /* PCI bridge: map the address through the ranges property */ - na = prom_n_addr_cells(np); - ranges = (unsigned int *) get_property(np, "ranges", &rlen); - while ((rlen -= (na + 5) * sizeof(unsigned int)) >= 0) { - if (((ranges[0] >> 24) & 3) == type - && ranges[2] <= addr - && addr - ranges[2] < ranges[na+4]) { - /* ok, this matches, translate it */ - addr += ranges[na+2] - ranges[2]; - break; - } - ranges += na + 5; - } - } - return addr; -} - -static unsigned long __init -interpret_pci_props(struct device_node *np, unsigned long mem_start, - int naddrc, int nsizec) -{ - struct address_range *adr; - struct pci_reg_property *pci_addrs; - int i, l, *ip; - - pci_addrs = (struct pci_reg_property *) - get_property(np, "assigned-addresses", &l); - if (pci_addrs != 0 && l >= sizeof(struct pci_reg_property)) { - i = 0; - adr = (struct address_range *) mem_start; - while ((l -= sizeof(struct pci_reg_property)) >= 0) { - adr[i].space = pci_addrs[i].addr.a_hi; - adr[i].address = map_addr(np, pci_addrs[i].addr.a_hi, - pci_addrs[i].addr.a_lo); - adr[i].size = pci_addrs[i].size_lo; - ++i; - } - np->addrs = adr; - np->n_addrs = i; - mem_start += i * sizeof(struct address_range); - } - - if (use_of_interrupt_tree) - return mem_start; - - ip = (int *) get_property(np, "AAPL,interrupts", &l); - if (ip == 0 && np->parent) - ip = (int *) get_property(np->parent, "AAPL,interrupts", &l); - if (ip == 0) - ip = (int *) get_property(np, "interrupts", &l); - if (ip != 0) { - np->intrs = (struct interrupt_info *) mem_start; - np->n_intrs = l / sizeof(int); - mem_start += np->n_intrs * sizeof(struct interrupt_info); - for (i = 0; i < np->n_intrs; ++i) { - np->intrs[i].line = *ip++; - np->intrs[i].sense = 1; - } - } - - return mem_start; -} - -static unsigned long __init -interpret_dbdma_props(struct device_node *np, unsigned long mem_start, - int naddrc, int nsizec) -{ - struct reg_property *rp; - struct address_range *adr; - unsigned long base_address; - int i, l, *ip; - struct device_node *db; - - base_address = 0; - for (db = np->parent; db != NULL; db = db->parent) { - if (!strcmp(db->type, "dbdma") && db->n_addrs != 0) { - base_address = db->addrs[0].address; - break; - } - } - - rp = (struct reg_property *) get_property(np, "reg", &l); - if (rp != 0 && l >= sizeof(struct reg_property)) { - i = 0; - adr = (struct address_range *) mem_start; - while ((l -= sizeof(struct reg_property)) >= 0) { - adr[i].space = 2; - adr[i].address = rp[i].address + base_address; - adr[i].size = rp[i].size; - ++i; - } - np->addrs = adr; - np->n_addrs = i; - mem_start += i * sizeof(struct address_range); - } - - if (use_of_interrupt_tree) - return mem_start; - - ip = (int *) get_property(np, "AAPL,interrupts", &l); - if (ip == 0) - ip = (int *) get_property(np, "interrupts", &l); - if (ip != 0) { - np->intrs = (struct interrupt_info *) mem_start; - np->n_intrs = l / sizeof(int); - mem_start += np->n_intrs * sizeof(struct interrupt_info); - for (i = 0; i < np->n_intrs; ++i) { - np->intrs[i].line = *ip++; - np->intrs[i].sense = 1; - } - } - - return mem_start; -} - -static unsigned long __init -interpret_macio_props(struct device_node *np, unsigned long mem_start, - int naddrc, int nsizec) -{ - struct reg_property *rp; - struct address_range *adr; - unsigned long base_address; - int i, l, *ip; - struct device_node *db; - - base_address = 0; - for (db = np->parent; db != NULL; db = db->parent) { - if (!strcmp(db->type, "mac-io") && db->n_addrs != 0) { - base_address = db->addrs[0].address; - break; - } - } - - rp = (struct reg_property *) get_property(np, "reg", &l); - if (rp != 0 && l >= sizeof(struct reg_property)) { - i = 0; - adr = (struct address_range *) mem_start; - while ((l -= sizeof(struct reg_property)) >= 0) { - adr[i].space = 2; - adr[i].address = rp[i].address + base_address; - adr[i].size = rp[i].size; - ++i; - } - np->addrs = adr; - np->n_addrs = i; - mem_start += i * sizeof(struct address_range); - } - - if (use_of_interrupt_tree) - return mem_start; - - ip = (int *) get_property(np, "interrupts", &l); - if (ip == 0) - ip = (int *) get_property(np, "AAPL,interrupts", &l); - if (ip != 0) { - np->intrs = (struct interrupt_info *) mem_start; - np->n_intrs = l / sizeof(int); - for (i = 0; i < np->n_intrs; ++i) { - np->intrs[i].line = *ip++; - np->intrs[i].sense = 1; - } - mem_start += np->n_intrs * sizeof(struct interrupt_info); - } - - return mem_start; -} - -static unsigned long __init -interpret_isa_props(struct device_node *np, unsigned long mem_start, - int naddrc, int nsizec) -{ - struct isa_reg_property *rp; - struct address_range *adr; - int i, l, *ip; - - rp = (struct isa_reg_property *) get_property(np, "reg", &l); - if (rp != 0 && l >= sizeof(struct isa_reg_property)) { - i = 0; - adr = (struct address_range *) mem_start; - while ((l -= sizeof(struct reg_property)) >= 0) { - adr[i].space = rp[i].space; - adr[i].address = rp[i].address - + (adr[i].space? 0: _ISA_MEM_BASE); - adr[i].size = rp[i].size; - ++i; - } - np->addrs = adr; - np->n_addrs = i; - mem_start += i * sizeof(struct address_range); - } - - if (use_of_interrupt_tree) - return mem_start; - - ip = (int *) get_property(np, "interrupts", &l); - if (ip != 0) { - np->intrs = (struct interrupt_info *) mem_start; - np->n_intrs = l / (2 * sizeof(int)); - mem_start += np->n_intrs * sizeof(struct interrupt_info); - for (i = 0; i < np->n_intrs; ++i) { - np->intrs[i].line = *ip++; - np->intrs[i].sense = *ip++; - } - } - - return mem_start; -} - -static unsigned long __init -interpret_root_props(struct device_node *np, unsigned long mem_start, - int naddrc, int nsizec) -{ - struct address_range *adr; - int i, l, *ip; - unsigned int *rp; - int rpsize = (naddrc + nsizec) * sizeof(unsigned int); - - rp = (unsigned int *) get_property(np, "reg", &l); - if (rp != 0 && l >= rpsize) { - i = 0; - adr = (struct address_range *) mem_start; - while ((l -= rpsize) >= 0) { - adr[i].space = (naddrc >= 2? rp[naddrc-2]: 2); - adr[i].address = rp[naddrc - 1]; - adr[i].size = rp[naddrc + nsizec - 1]; - ++i; - rp += naddrc + nsizec; - } - np->addrs = adr; - np->n_addrs = i; - mem_start += i * sizeof(struct address_range); - } - - if (use_of_interrupt_tree) - return mem_start; - - ip = (int *) get_property(np, "AAPL,interrupts", &l); - if (ip == 0) - ip = (int *) get_property(np, "interrupts", &l); - if (ip != 0) { - np->intrs = (struct interrupt_info *) mem_start; - np->n_intrs = l / sizeof(int); - mem_start += np->n_intrs * sizeof(struct interrupt_info); - for (i = 0; i < np->n_intrs; ++i) { - np->intrs[i].line = *ip++; - np->intrs[i].sense = 1; - } - } - - return mem_start; -} - -/* - * Work out the sense (active-low level / active-high edge) - * of each interrupt from the device tree. - */ -void __init -prom_get_irq_senses(unsigned char *senses, int off, int max) -{ - struct device_node *np; - int i, j; - - /* default to level-triggered */ - memset(senses, 1, max - off); - if (!use_of_interrupt_tree) - return; - - for (np = allnodes; np != 0; np = np->allnext) { - for (j = 0; j < np->n_intrs; j++) { - i = np->intrs[j].line; - if (i >= off && i < max) { - if (np->intrs[j].sense == 1) - senses[i-off] = (IRQ_SENSE_LEVEL - | IRQ_POLARITY_NEGATIVE); - else - senses[i-off] = (IRQ_SENSE_EDGE - | IRQ_POLARITY_POSITIVE); - } - } - } -} - -/* - * Construct and return a list of the device_nodes with a given name. - */ -struct device_node * -find_devices(const char *name) -{ - struct device_node *head, **prevp, *np; - - prevp = &head; - for (np = allnodes; np != 0; np = np->allnext) { - if (np->name != 0 && strcasecmp(np->name, name) == 0) { - *prevp = np; - prevp = &np->next; - } - } - *prevp = NULL; - return head; -} - -/* - * Construct and return a list of the device_nodes with a given type. - */ -struct device_node * -find_type_devices(const char *type) -{ - struct device_node *head, **prevp, *np; - - prevp = &head; - for (np = allnodes; np != 0; np = np->allnext) { - if (np->type != 0 && strcasecmp(np->type, type) == 0) { - *prevp = np; - prevp = &np->next; - } - } - *prevp = NULL; - return head; -} - -/* - * Returns all nodes linked together - */ -struct device_node * -find_all_nodes(void) -{ - struct device_node *head, **prevp, *np; - - prevp = &head; - for (np = allnodes; np != 0; np = np->allnext) { - *prevp = np; - prevp = &np->next; - } - *prevp = NULL; - return head; -} - -/* Checks if the given "compat" string matches one of the strings in - * the device's "compatible" property - */ -int -device_is_compatible(struct device_node *device, const char *compat) -{ - const char* cp; - int cplen, l; - - cp = (char *) get_property(device, "compatible", &cplen); - if (cp == NULL) - return 0; - while (cplen > 0) { - if (strncasecmp(cp, compat, strlen(compat)) == 0) - return 1; - l = strlen(cp) + 1; - cp += l; - cplen -= l; - } - - return 0; -} - - -/* - * Indicates whether the root node has a given value in its - * compatible property. - */ -int -machine_is_compatible(const char *compat) -{ - struct device_node *root; - - root = find_path_device("/"); - if (root == 0) - return 0; - return device_is_compatible(root, compat); -} - -/* - * Construct and return a list of the device_nodes with a given type - * and compatible property. - */ -struct device_node * -find_compatible_devices(const char *type, const char *compat) -{ - struct device_node *head, **prevp, *np; - - prevp = &head; - for (np = allnodes; np != 0; np = np->allnext) { - if (type != NULL - && !(np->type != 0 && strcasecmp(np->type, type) == 0)) - continue; - if (device_is_compatible(np, compat)) { - *prevp = np; - prevp = &np->next; - } - } - *prevp = NULL; - return head; -} - -/* - * Find the device_node with a given full_name. - */ -struct device_node * -find_path_device(const char *path) -{ - struct device_node *np; - - for (np = allnodes; np != 0; np = np->allnext) - if (np->full_name != 0 && strcasecmp(np->full_name, path) == 0) - return np; - return NULL; -} - -/******* - * - * New implementation of the OF "find" APIs, return a refcounted - * object, call of_node_put() when done. Currently, still lacks - * locking as old implementation, this is beeing done for ppc64. - * - * Note that property management will need some locking as well, - * this isn't dealt with yet - * - *******/ - -/** - * of_find_node_by_name - Find a node by it's "name" property - * @from: The node to start searching from or NULL, the node - * you pass will not be searched, only the next one - * will; typically, you pass what the previous call - * returned. of_node_put() will be called on it - * @name: The name string to match against - * - * Returns a node pointer with refcount incremented, use - * of_node_put() on it when done. - */ -struct device_node *of_find_node_by_name(struct device_node *from, - const char *name) -{ - struct device_node *np = from ? from->allnext : allnodes; - - for (; np != 0; np = np->allnext) - if (np->name != 0 && strcasecmp(np->name, name) == 0) - break; - if (from) - of_node_put(from); - return of_node_get(np); -} - -/** - * of_find_node_by_type - Find a node by it's "device_type" property - * @from: The node to start searching from or NULL, the node - * you pass will not be searched, only the next one - * will; typically, you pass what the previous call - * returned. of_node_put() will be called on it - * @name: The type string to match against - * - * Returns a node pointer with refcount incremented, use - * of_node_put() on it when done. - */ -struct device_node *of_find_node_by_type(struct device_node *from, - const char *type) -{ - struct device_node *np = from ? from->allnext : allnodes; - - for (; np != 0; np = np->allnext) - if (np->type != 0 && strcasecmp(np->type, type) == 0) - break; - if (from) - of_node_put(from); - return of_node_get(np); -} - -/** - * of_find_compatible_node - Find a node based on type and one of the - * tokens in it's "compatible" property - * @from: The node to start searching from or NULL, the node - * you pass will not be searched, only the next one - * will; typically, you pass what the previous call - * returned. of_node_put() will be called on it - * @type: The type string to match "device_type" or NULL to ignore - * @compatible: The string to match to one of the tokens in the device - * "compatible" list. - * - * Returns a node pointer with refcount incremented, use - * of_node_put() on it when done. - */ -struct device_node *of_find_compatible_node(struct device_node *from, - const char *type, const char *compatible) -{ - struct device_node *np = from ? from->allnext : allnodes; - - for (; np != 0; np = np->allnext) { - if (type != NULL - && !(np->type != 0 && strcasecmp(np->type, type) == 0)) - continue; - if (device_is_compatible(np, compatible)) - break; - } - if (from) - of_node_put(from); - return of_node_get(np); -} - -/** - * of_find_node_by_path - Find a node matching a full OF path - * @path: The full path to match - * - * Returns a node pointer with refcount incremented, use - * of_node_put() on it when done. - */ -struct device_node *of_find_node_by_path(const char *path) -{ - struct device_node *np = allnodes; - - for (; np != 0; np = np->allnext) - if (np->full_name != 0 && strcasecmp(np->full_name, path) == 0) - break; - return of_node_get(np); -} - -/** - * of_find_all_nodes - Get next node in global list - * @prev: Previous node or NULL to start iteration - * of_node_put() will be called on it - * - * Returns a node pointer with refcount incremented, use - * of_node_put() on it when done. - */ -struct device_node *of_find_all_nodes(struct device_node *prev) -{ - return of_node_get(prev ? prev->allnext : allnodes); -} - -/** - * of_get_parent - Get a node's parent if any - * @node: Node to get parent - * - * Returns a node pointer with refcount incremented, use - * of_node_put() on it when done. - */ -struct device_node *of_get_parent(const struct device_node *node) -{ - return node ? of_node_get(node->parent) : NULL; -} - -/** - * of_get_next_child - Iterate a node childs - * @node: parent node - * @prev: previous child of the parent node, or NULL to get first - * - * Returns a node pointer with refcount incremented, use - * of_node_put() on it when done. - */ -struct device_node *of_get_next_child(const struct device_node *node, - struct device_node *prev) -{ - struct device_node *next = prev ? prev->sibling : node->child; - - for (; next != 0; next = next->sibling) - if (of_node_get(next)) - break; - if (prev) - of_node_put(prev); - return next; -} - -/** - * of_node_get - Increment refcount of a node - * @node: Node to inc refcount, NULL is supported to - * simplify writing of callers - * - * Returns the node itself or NULL if gone. Current implementation - * does nothing as we don't yet do dynamic node allocation on ppc32 - */ -struct device_node *of_node_get(struct device_node *node) -{ - return node; -} - -/** - * of_node_put - Decrement refcount of a node - * @node: Node to dec refcount, NULL is supported to - * simplify writing of callers - * - * Current implementation does nothing as we don't yet do dynamic node - * allocation on ppc32 - */ -void of_node_put(struct device_node *node) -{ -} - -/* - * Find the device_node with a given phandle. - */ -static struct device_node * __init -find_phandle(phandle ph) -{ - struct device_node *np; - - for (np = allnodes; np != 0; np = np->allnext) - if (np->node == ph) - return np; - return NULL; -} - -/* - * Find a property with a given name for a given node - * and return the value. - */ -unsigned char * -get_property(struct device_node *np, const char *name, int *lenp) -{ - struct property *pp; - - for (pp = np->properties; pp != 0; pp = pp->next) - if (pp->name != NULL && strcmp(pp->name, name) == 0) { - if (lenp != 0) - *lenp = pp->length; - return pp->value; - } - return NULL; -} - -/* - * Add a property to a node - */ -int -prom_add_property(struct device_node* np, struct property* prop) -{ - struct property **next = &np->properties; - - prop->next = NULL; - while (*next) - next = &(*next)->next; - *next = prop; - - return 0; -} - -/* I quickly hacked that one, check against spec ! */ -static inline unsigned long -bus_space_to_resource_flags(unsigned int bus_space) -{ - u8 space = (bus_space >> 24) & 0xf; - if (space == 0) - space = 0x02; - if (space == 0x02) - return IORESOURCE_MEM; - else if (space == 0x01) - return IORESOURCE_IO; - else { - printk(KERN_WARNING "prom.c: bus_space_to_resource_flags(), space: %x\n", - bus_space); - return 0; - } -} - -static struct resource* -find_parent_pci_resource(struct pci_dev* pdev, struct address_range *range) -{ - unsigned long mask; - int i; - - /* Check this one */ - mask = bus_space_to_resource_flags(range->space); - for (i=0; i<DEVICE_COUNT_RESOURCE; i++) { - if ((pdev->resource[i].flags & mask) == mask && - pdev->resource[i].start <= range->address && - pdev->resource[i].end > range->address) { - if ((range->address + range->size - 1) > pdev->resource[i].end) { - /* Add better message */ - printk(KERN_WARNING "PCI/OF resource overlap !\n"); - return NULL; - } - break; - } - } - if (i == DEVICE_COUNT_RESOURCE) - return NULL; - return &pdev->resource[i]; -} - -/* - * Request an OF device resource. Currently handles child of PCI devices, - * or other nodes attached to the root node. Ultimately, put some - * link to resources in the OF node. - */ -struct resource* -request_OF_resource(struct device_node* node, int index, const char* name_postfix) -{ - struct pci_dev* pcidev; - u8 pci_bus, pci_devfn; - unsigned long iomask; - struct device_node* nd; - struct resource* parent; - struct resource *res = NULL; - int nlen, plen; - - if (index >= node->n_addrs) - goto fail; - - /* Sanity check on bus space */ - iomask = bus_space_to_resource_flags(node->addrs[index].space); - if (iomask & IORESOURCE_MEM) - parent = &iomem_resource; - else if (iomask & IORESOURCE_IO) - parent = &ioport_resource; - else - goto fail; - - /* Find a PCI parent if any */ - nd = node; - pcidev = NULL; - while(nd) { - if (!pci_device_from_OF_node(nd, &pci_bus, &pci_devfn)) - pcidev = pci_find_slot(pci_bus, pci_devfn); - if (pcidev) break; - nd = nd->parent; - } - if (pcidev) - parent = find_parent_pci_resource(pcidev, &node->addrs[index]); - if (!parent) { - printk(KERN_WARNING "request_OF_resource(%s), parent not found\n", - node->name); - goto fail; - } - - res = __request_region(parent, node->addrs[index].address, node->addrs[index].size, NULL); - if (!res) - goto fail; - nlen = strlen(node->name); - plen = name_postfix ? strlen(name_postfix) : 0; - res->name = (const char *)kmalloc(nlen+plen+1, GFP_KERNEL); - if (res->name) { - strcpy((char *)res->name, node->name); - if (plen) - strcpy((char *)res->name+nlen, name_postfix); - } - return res; -fail: - return NULL; -} - -int -release_OF_resource(struct device_node* node, int index) -{ - struct pci_dev* pcidev; - u8 pci_bus, pci_devfn; - unsigned long iomask, start, end; - struct device_node* nd; - struct resource* parent; - struct resource *res = NULL; - - if (index >= node->n_addrs) - return -EINVAL; - - /* Sanity check on bus space */ - iomask = bus_space_to_resource_flags(node->addrs[index].space); - if (iomask & IORESOURCE_MEM) - parent = &iomem_resource; - else if (iomask & IORESOURCE_IO) - parent = &ioport_resource; - else - return -EINVAL; - - /* Find a PCI parent if any */ - nd = node; - pcidev = NULL; - while(nd) { - if (!pci_device_from_OF_node(nd, &pci_bus, &pci_devfn)) - pcidev = pci_find_slot(pci_bus, pci_devfn); - if (pcidev) break; - nd = nd->parent; - } - if (pcidev) - parent = find_parent_pci_resource(pcidev, &node->addrs[index]); - if (!parent) { - printk(KERN_WARNING "release_OF_resource(%s), parent not found\n", - node->name); - return -ENODEV; - } - - /* Find us in the parent and its childs */ - res = parent->child; - start = node->addrs[index].address; - end = start + node->addrs[index].size - 1; - while (res) { - if (res->start == start && res->end == end && - (res->flags & IORESOURCE_BUSY)) - break; - if (res->start <= start && res->end >= end) - res = res->child; - else - res = res->sibling; - } - if (!res) - return -ENODEV; - - kfree(res->name); - res->name = NULL; - release_resource(res); - kfree(res); - - return 0; -} - -#if 0 -void -print_properties(struct device_node *np) -{ - struct property *pp; - char *cp; - int i, n; - - for (pp = np->properties; pp != 0; pp = pp->next) { - printk(KERN_INFO "%s", pp->name); - for (i = strlen(pp->name); i < 16; ++i) - printk(" "); - cp = (char *) pp->value; - for (i = pp->length; i > 0; --i, ++cp) - if ((i > 1 && (*cp < 0x20 || *cp > 0x7e)) - || (i == 1 && *cp != 0)) - break; - if (i == 0 && pp->length > 1) { - /* looks like a string */ - printk(" %s\n", (char *) pp->value); - } else { - /* dump it in hex */ - n = pp->length; - if (n > 64) - n = 64; - if (pp->length % 4 == 0) { - unsigned int *p = (unsigned int *) pp->value; - - n /= 4; - for (i = 0; i < n; ++i) { - if (i != 0 && (i % 4) == 0) - printk("\n "); - printk(" %08x", *p++); - } - } else { - unsigned char *bp = pp->value; - - for (i = 0; i < n; ++i) { - if (i != 0 && (i % 16) == 0) - printk("\n "); - printk(" %02x", *bp++); - } - } - printk("\n"); - if (pp->length > 64) - printk(" ... (length = %d)\n", - pp->length); - } - } -} -#endif - -static DEFINE_SPINLOCK(rtas_lock); - -/* this can be called after setup -- Cort */ -int -call_rtas(const char *service, int nargs, int nret, - unsigned long *outputs, ...) -{ - va_list list; - int i; - unsigned long s; - struct device_node *rtas; - int *tokp; - union { - unsigned long words[16]; - double align; - } u; - - rtas = find_devices("rtas"); - if (rtas == NULL) - return -1; - tokp = (int *) get_property(rtas, service, NULL); - if (tokp == NULL) { - printk(KERN_ERR "No RTAS service called %s\n", service); - return -1; - } - u.words[0] = *tokp; - u.words[1] = nargs; - u.words[2] = nret; - va_start(list, outputs); - for (i = 0; i < nargs; ++i) - u.words[i+3] = va_arg(list, unsigned long); - va_end(list); - - /* - * RTAS doesn't use floating point. - * Or at least, according to the CHRP spec we enter RTAS - * with FP disabled, and it doesn't change the FP registers. - * -- paulus. - */ - spin_lock_irqsave(&rtas_lock, s); - enter_rtas((void *)__pa(&u)); - spin_unlock_irqrestore(&rtas_lock, s); - - if (nret > 1 && outputs != NULL) - for (i = 0; i < nret-1; ++i) - outputs[i] = u.words[i+nargs+4]; - return u.words[nargs+3]; -} diff --git a/arch/ppc/syslib/prom_init.c b/arch/ppc/syslib/prom_init.c deleted file mode 100644 index df14422ae1c..00000000000 --- a/arch/ppc/syslib/prom_init.c +++ /dev/null @@ -1,1011 +0,0 @@ -/* - * Note that prom_init() and anything called from prom_init() - * may be running at an address that is different from the address - * that it was linked at. References to static data items are - * handled by compiling this file with -mrelocatable-lib. - */ - -#include <linux/config.h> -#include <linux/kernel.h> -#include <linux/string.h> -#include <linux/init.h> -#include <linux/threads.h> -#include <linux/spinlock.h> -#include <linux/ioport.h> -#include <linux/pci.h> -#include <linux/slab.h> -#include <linux/bitops.h> - -#include <asm/sections.h> -#include <asm/prom.h> -#include <asm/page.h> -#include <asm/irq.h> -#include <asm/io.h> -#include <asm/smp.h> -#include <asm/bootx.h> -#include <asm/system.h> -#include <asm/mmu.h> -#include <asm/pgtable.h> -#include <asm/bootinfo.h> -#include <asm/btext.h> -#include <asm/pci-bridge.h> -#include <asm/open_pic.h> -#include <asm/cacheflush.h> - -#ifdef CONFIG_LOGO_LINUX_CLUT224 -#include <linux/linux_logo.h> -extern const struct linux_logo logo_linux_clut224; -#endif - -/* - * Properties whose value is longer than this get excluded from our - * copy of the device tree. This way we don't waste space storing - * things like "driver,AAPL,MacOS,PowerPC" properties. But this value - * does need to be big enough to ensure that we don't lose things - * like the interrupt-map property on a PCI-PCI bridge. - */ -#define MAX_PROPERTY_LENGTH 4096 - -#ifndef FB_MAX /* avoid pulling in all of the fb stuff */ -#define FB_MAX 8 -#endif - -#define ALIGNUL(x) (((x) + sizeof(unsigned long)-1) & -sizeof(unsigned long)) - -typedef u32 prom_arg_t; - -struct prom_args { - const char *service; - int nargs; - int nret; - prom_arg_t args[10]; -}; - -struct pci_address { - unsigned a_hi; - unsigned a_mid; - unsigned a_lo; -}; - -struct pci_reg_property { - struct pci_address addr; - unsigned size_hi; - unsigned size_lo; -}; - -struct pci_range { - struct pci_address addr; - unsigned phys; - unsigned size_hi; - unsigned size_lo; -}; - -struct isa_reg_property { - unsigned space; - unsigned address; - unsigned size; -}; - -struct pci_intr_map { - struct pci_address addr; - unsigned dunno; - phandle int_ctrler; - unsigned intr; -}; - -static void prom_exit(void); -static int call_prom(const char *service, int nargs, int nret, ...); -static int call_prom_ret(const char *service, int nargs, int nret, - prom_arg_t *rets, ...); -static void prom_print_hex(unsigned int v); -static int prom_set_color(ihandle ih, int i, int r, int g, int b); -static int prom_next_node(phandle *nodep); -static unsigned long check_display(unsigned long mem); -static void setup_disp_fake_bi(ihandle dp); -static unsigned long copy_device_tree(unsigned long mem_start, - unsigned long mem_end); -static unsigned long inspect_node(phandle node, struct device_node *dad, - unsigned long mem_start, unsigned long mem_end, - struct device_node ***allnextpp); -static void prom_hold_cpus(unsigned long mem); -static void prom_instantiate_rtas(void); -static void * early_get_property(unsigned long base, unsigned long node, - char *prop); - -prom_entry prom __initdata; -ihandle prom_chosen __initdata; -ihandle prom_stdout __initdata; - -static char *prom_display_paths[FB_MAX] __initdata; -static phandle prom_display_nodes[FB_MAX] __initdata; -static unsigned int prom_num_displays __initdata; -static ihandle prom_disp_node __initdata; -char *of_stdout_device __initdata; - -unsigned int rtas_data; /* physical pointer */ -unsigned int rtas_entry; /* physical pointer */ -unsigned int rtas_size; -unsigned int old_rtas; - -boot_infos_t *boot_infos; -char *bootpath; -char *bootdevice; -struct device_node *allnodes; - -extern char *klimit; - -static void __init -prom_exit(void) -{ - struct prom_args args; - - args.service = "exit"; - args.nargs = 0; - args.nret = 0; - prom(&args); - for (;;) /* should never get here */ - ; -} - -static int __init -call_prom(const char *service, int nargs, int nret, ...) -{ - va_list list; - int i; - struct prom_args prom_args; - - prom_args.service = service; - prom_args.nargs = nargs; - prom_args.nret = nret; - va_start(list, nret); - for (i = 0; i < nargs; ++i) - prom_args.args[i] = va_arg(list, prom_arg_t); - va_end(list); - for (i = 0; i < nret; ++i) - prom_args.args[i + nargs] = 0; - prom(&prom_args); - return prom_args.args[nargs]; -} - -static int __init -call_prom_ret(const char *service, int nargs, int nret, prom_arg_t *rets, ...) -{ - va_list list; - int i; - struct prom_args prom_args; - - prom_args.service = service; - prom_args.nargs = nargs; - prom_args.nret = nret; - va_start(list, rets); - for (i = 0; i < nargs; ++i) - prom_args.args[i] = va_arg(list, int); - va_end(list); - for (i = 0; i < nret; ++i) - prom_args.args[i + nargs] = 0; - prom(&prom_args); - for (i = 1; i < nret; ++i) - rets[i-1] = prom_args.args[nargs + i]; - return prom_args.args[nargs]; -} - -void __init -prom_print(const char *msg) -{ - const char *p, *q; - - if (prom_stdout == 0) - return; - - for (p = msg; *p != 0; p = q) { - for (q = p; *q != 0 && *q != '\n'; ++q) - ; - if (q > p) - call_prom("write", 3, 1, prom_stdout, p, q - p); - if (*q != 0) { - ++q; - call_prom("write", 3, 1, prom_stdout, "\r\n", 2); - } - } -} - -static void __init -prom_print_hex(unsigned int v) -{ - char buf[16]; - int i, c; - - for (i = 0; i < 8; ++i) { - c = (v >> ((7-i)*4)) & 0xf; - c += (c >= 10)? ('a' - 10): '0'; - buf[i] = c; - } - buf[i] = ' '; - buf[i+1] = 0; - prom_print(buf); -} - -static int __init -prom_set_color(ihandle ih, int i, int r, int g, int b) -{ - return call_prom("call-method", 6, 1, "color!", ih, i, b, g, r); -} - -static int __init -prom_next_node(phandle *nodep) -{ - phandle node; - - if ((node = *nodep) != 0 - && (*nodep = call_prom("child", 1, 1, node)) != 0) - return 1; - if ((*nodep = call_prom("peer", 1, 1, node)) != 0) - return 1; - for (;;) { - if ((node = call_prom("parent", 1, 1, node)) == 0) - return 0; - if ((*nodep = call_prom("peer", 1, 1, node)) != 0) - return 1; - } -} - -#ifdef CONFIG_POWER4 -/* - * Set up a hash table with a set of entries in it to map the - * first 64MB of RAM. This is used on 64-bit machines since - * some of them don't have BATs. - */ - -static inline void make_pte(unsigned long htab, unsigned int hsize, - unsigned int va, unsigned int pa, int mode) -{ - unsigned int *pteg; - unsigned int hash, i, vsid; - - vsid = ((va >> 28) * 0x111) << 12; - hash = ((va ^ vsid) >> 5) & 0x7fff80; - pteg = (unsigned int *)(htab + (hash & (hsize - 1))); - for (i = 0; i < 8; ++i, pteg += 4) { - if ((pteg[1] & 1) == 0) { - pteg[1] = vsid | ((va >> 16) & 0xf80) | 1; - pteg[3] = pa | mode; - break; - } - } -} - -extern unsigned long _SDR1; -extern PTE *Hash; -extern unsigned long Hash_size; - -static void __init -prom_alloc_htab(void) -{ - unsigned int hsize; - unsigned long htab; - unsigned int addr; - - /* - * Because of OF bugs we can't use the "claim" client - * interface to allocate memory for the hash table. - * This code is only used on 64-bit PPCs, and the only - * 64-bit PPCs at the moment are RS/6000s, and their - * OF is based at 0xc00000 (the 12M point), so we just - * arbitrarily use the 0x800000 - 0xc00000 region for the - * hash table. - * -- paulus. - */ - hsize = 4 << 20; /* POWER4 has no BATs */ - htab = (8 << 20); - call_prom("claim", 3, 1, htab, hsize, 0); - Hash = (void *)(htab + KERNELBASE); - Hash_size = hsize; - _SDR1 = htab + __ilog2(hsize) - 18; - - /* - * Put in PTEs for the first 64MB of RAM - */ - memset((void *)htab, 0, hsize); - for (addr = 0; addr < 0x4000000; addr += 0x1000) - make_pte(htab, hsize, addr + KERNELBASE, addr, - _PAGE_ACCESSED | _PAGE_COHERENT | PP_RWXX); -#if 0 /* DEBUG stuff mapping the SCC */ - make_pte(htab, hsize, 0x80013000, 0x80013000, - _PAGE_ACCESSED | _PAGE_NO_CACHE | _PAGE_GUARDED | PP_RWXX); -#endif -} -#endif /* CONFIG_POWER4 */ - - -/* - * If we have a display that we don't know how to drive, - * we will want to try to execute OF's open method for it - * later. However, OF will probably fall over if we do that - * we've taken over the MMU. - * So we check whether we will need to open the display, - * and if so, open it now. - */ -static unsigned long __init -check_display(unsigned long mem) -{ - phandle node; - ihandle ih; - int i, j; - char type[16], *path; - static unsigned char default_colors[] = { - 0x00, 0x00, 0x00, - 0x00, 0x00, 0xaa, - 0x00, 0xaa, 0x00, - 0x00, 0xaa, 0xaa, - 0xaa, 0x00, 0x00, - 0xaa, 0x00, 0xaa, - 0xaa, 0xaa, 0x00, - 0xaa, 0xaa, 0xaa, - 0x55, 0x55, 0x55, - 0x55, 0x55, 0xff, - 0x55, 0xff, 0x55, - 0x55, 0xff, 0xff, - 0xff, 0x55, 0x55, - 0xff, 0x55, 0xff, - 0xff, 0xff, 0x55, - 0xff, 0xff, 0xff - }; - const unsigned char *clut; - - prom_disp_node = 0; - - for (node = 0; prom_next_node(&node); ) { - type[0] = 0; - call_prom("getprop", 4, 1, node, "device_type", - type, sizeof(type)); - if (strcmp(type, "display") != 0) - continue; - /* It seems OF doesn't null-terminate the path :-( */ - path = (char *) mem; - memset(path, 0, 256); - if (call_prom("package-to-path", 3, 1, node, path, 255) < 0) - continue; - - /* - * If this display is the device that OF is using for stdout, - * move it to the front of the list. - */ - mem += strlen(path) + 1; - i = prom_num_displays++; - if (of_stdout_device != 0 && i > 0 - && strcmp(of_stdout_device, path) == 0) { - for (; i > 0; --i) { - prom_display_paths[i] - = prom_display_paths[i-1]; - prom_display_nodes[i] - = prom_display_nodes[i-1]; - } - } - prom_display_paths[i] = path; - prom_display_nodes[i] = node; - if (i == 0) - prom_disp_node = node; - if (prom_num_displays >= FB_MAX) - break; - } - - for (j=0; j<prom_num_displays; j++) { - path = prom_display_paths[j]; - node = prom_display_nodes[j]; - prom_print("opening display "); - prom_print(path); - ih = call_prom("open", 1, 1, path); - if (ih == 0 || ih == (ihandle) -1) { - prom_print("... failed\n"); - for (i=j+1; i<prom_num_displays; i++) { - prom_display_paths[i-1] = prom_display_paths[i]; - prom_display_nodes[i-1] = prom_display_nodes[i]; - } - if (--prom_num_displays > 0) { - prom_disp_node = prom_display_nodes[j]; - j--; - } else - prom_disp_node = 0; - continue; - } else { - prom_print("... ok\n"); - call_prom("setprop", 4, 1, node, "linux,opened", 0, 0); - - /* - * Setup a usable color table when the appropriate - * method is available. - * Should update this to use set-colors. - */ - clut = default_colors; - for (i = 0; i < 32; i++, clut += 3) - if (prom_set_color(ih, i, clut[0], clut[1], - clut[2]) != 0) - break; - -#ifdef CONFIG_LOGO_LINUX_CLUT224 - clut = PTRRELOC(logo_linux_clut224.clut); - for (i = 0; i < logo_linux_clut224.clutsize; - i++, clut += 3) - if (prom_set_color(ih, i + 32, clut[0], - clut[1], clut[2]) != 0) - break; -#endif /* CONFIG_LOGO_LINUX_CLUT224 */ - } - } - - if (prom_stdout) { - phandle p; - p = call_prom("instance-to-package", 1, 1, prom_stdout); - if (p && p != -1) { - type[0] = 0; - call_prom("getprop", 4, 1, p, "device_type", - type, sizeof(type)); - if (strcmp(type, "display") == 0) - call_prom("setprop", 4, 1, p, "linux,boot-display", - 0, 0); - } - } - - return ALIGNUL(mem); -} - -/* This function will enable the early boot text when doing OF booting. This - * way, xmon output should work too - */ -static void __init -setup_disp_fake_bi(ihandle dp) -{ -#ifdef CONFIG_BOOTX_TEXT - int width = 640, height = 480, depth = 8, pitch; - unsigned address; - struct pci_reg_property addrs[8]; - int i, naddrs; - char name[32]; - char *getprop = "getprop"; - - prom_print("Initializing fake screen: "); - - memset(name, 0, sizeof(name)); - call_prom(getprop, 4, 1, dp, "name", name, sizeof(name)); - name[sizeof(name)-1] = 0; - prom_print(name); - prom_print("\n"); - call_prom(getprop, 4, 1, dp, "width", &width, sizeof(width)); - call_prom(getprop, 4, 1, dp, "height", &height, sizeof(height)); - call_prom(getprop, 4, 1, dp, "depth", &depth, sizeof(depth)); - pitch = width * ((depth + 7) / 8); - call_prom(getprop, 4, 1, dp, "linebytes", - &pitch, sizeof(pitch)); - if (pitch == 1) - pitch = 0x1000; /* for strange IBM display */ - address = 0; - call_prom(getprop, 4, 1, dp, "address", - &address, sizeof(address)); - if (address == 0) { - /* look for an assigned address with a size of >= 1MB */ - naddrs = call_prom(getprop, 4, 1, dp, "assigned-addresses", - addrs, sizeof(addrs)); - naddrs /= sizeof(struct pci_reg_property); - for (i = 0; i < naddrs; ++i) { - if (addrs[i].size_lo >= (1 << 20)) { - address = addrs[i].addr.a_lo; - /* use the BE aperture if possible */ - if (addrs[i].size_lo >= (16 << 20)) - address += (8 << 20); - break; - } - } - if (address == 0) { - prom_print("Failed to get address\n"); - return; - } - } - /* kludge for valkyrie */ - if (strcmp(name, "valkyrie") == 0) - address += 0x1000; - -#ifdef CONFIG_POWER4 -#if CONFIG_TASK_SIZE > 0x80000000 -#error CONFIG_TASK_SIZE cannot be above 0x80000000 with BOOTX_TEXT on G5 -#endif - { - extern boot_infos_t disp_bi; - unsigned long va, pa, i, offset; - va = 0x90000000; - pa = address & 0xfffff000ul; - offset = address & 0x00000fff; - - for (i=0; i<0x4000; i++) { - make_pte((unsigned long)Hash - KERNELBASE, Hash_size, va, pa, - _PAGE_ACCESSED | _PAGE_NO_CACHE | - _PAGE_GUARDED | PP_RWXX); - va += 0x1000; - pa += 0x1000; - } - btext_setup_display(width, height, depth, pitch, 0x90000000 | offset); - disp_bi.dispDeviceBase = (u8 *)address; - } -#else /* CONFIG_POWER4 */ - btext_setup_display(width, height, depth, pitch, address); - btext_prepare_BAT(); -#endif /* CONFIG_POWER4 */ -#endif /* CONFIG_BOOTX_TEXT */ -} - -/* - * Make a copy of the device tree from the PROM. - */ -static unsigned long __init -copy_device_tree(unsigned long mem_start, unsigned long mem_end) -{ - phandle root; - unsigned long new_start; - struct device_node **allnextp; - - root = call_prom("peer", 1, 1, (phandle)0); - if (root == (phandle)0) { - prom_print("couldn't get device tree root\n"); - prom_exit(); - } - allnextp = &allnodes; - mem_start = ALIGNUL(mem_start); - new_start = inspect_node(root, NULL, mem_start, mem_end, &allnextp); - *allnextp = NULL; - return new_start; -} - -static unsigned long __init -inspect_node(phandle node, struct device_node *dad, - unsigned long mem_start, unsigned long mem_end, - struct device_node ***allnextpp) -{ - int l; - phandle child; - struct device_node *np; - struct property *pp, **prev_propp; - char *prev_name, *namep; - unsigned char *valp; - - np = (struct device_node *) mem_start; - mem_start += sizeof(struct device_node); - memset(np, 0, sizeof(*np)); - np->node = node; - **allnextpp = PTRUNRELOC(np); - *allnextpp = &np->allnext; - if (dad != 0) { - np->parent = PTRUNRELOC(dad); - /* we temporarily use the `next' field as `last_child'. */ - if (dad->next == 0) - dad->child = PTRUNRELOC(np); - else - dad->next->sibling = PTRUNRELOC(np); - dad->next = np; - } - - /* get and store all properties */ - prev_propp = &np->properties; - prev_name = ""; - for (;;) { - pp = (struct property *) mem_start; - namep = (char *) (pp + 1); - pp->name = PTRUNRELOC(namep); - if (call_prom("nextprop", 3, 1, node, prev_name, namep) <= 0) - break; - mem_start = ALIGNUL((unsigned long)namep + strlen(namep) + 1); - prev_name = namep; - valp = (unsigned char *) mem_start; - pp->value = PTRUNRELOC(valp); - pp->length = call_prom("getprop", 4, 1, node, namep, - valp, mem_end - mem_start); - if (pp->length < 0) - continue; -#ifdef MAX_PROPERTY_LENGTH - if (pp->length > MAX_PROPERTY_LENGTH) - continue; /* ignore this property */ -#endif - mem_start = ALIGNUL(mem_start + pp->length); - *prev_propp = PTRUNRELOC(pp); - prev_propp = &pp->next; - } - if (np->node != 0) { - /* Add a "linux,phandle" property" */ - pp = (struct property *) mem_start; - *prev_propp = PTRUNRELOC(pp); - prev_propp = &pp->next; - namep = (char *) (pp + 1); - pp->name = PTRUNRELOC(namep); - strcpy(namep, "linux,phandle"); - mem_start = ALIGNUL((unsigned long)namep + strlen(namep) + 1); - pp->value = (unsigned char *) PTRUNRELOC(&np->node); - pp->length = sizeof(np->node); - } - *prev_propp = NULL; - - /* get the node's full name */ - l = call_prom("package-to-path", 3, 1, node, - mem_start, mem_end - mem_start); - if (l >= 0) { - char *p, *ep; - - np->full_name = PTRUNRELOC((char *) mem_start); - *(char *)(mem_start + l) = 0; - /* Fixup an Apple bug where they have bogus \0 chars in the - * middle of the path in some properties - */ - for (p = (char *)mem_start, ep = p + l; p < ep; p++) - if ((*p) == '\0') { - memmove(p, p+1, ep - p); - ep--; - } - mem_start = ALIGNUL(mem_start + l + 1); - } - - /* do all our children */ - child = call_prom("child", 1, 1, node); - while (child != 0) { - mem_start = inspect_node(child, np, mem_start, mem_end, - allnextpp); - child = call_prom("peer", 1, 1, child); - } - - return mem_start; -} - -unsigned long smp_chrp_cpu_nr __initdata = 0; - -/* - * With CHRP SMP we need to use the OF to start the other - * processors so we can't wait until smp_boot_cpus (the OF is - * trashed by then) so we have to put the processors into - * a holding pattern controlled by the kernel (not OF) before - * we destroy the OF. - * - * This uses a chunk of high memory, puts some holding pattern - * code there and sends the other processors off to there until - * smp_boot_cpus tells them to do something. We do that by using - * physical address 0x0. The holding pattern checks that address - * until its cpu # is there, when it is that cpu jumps to - * __secondary_start(). smp_boot_cpus() takes care of setting those - * values. - * - * We also use physical address 0x4 here to tell when a cpu - * is in its holding pattern code. - * - * -- Cort - * - * Note that we have to do this if we have more than one CPU, - * even if this is a UP kernel. Otherwise when we trash OF - * the other CPUs will start executing some random instructions - * and crash the system. -- paulus - */ -static void __init -prom_hold_cpus(unsigned long mem) -{ - extern void __secondary_hold(void); - unsigned long i; - int cpu; - phandle node; - char type[16], *path; - unsigned int reg; - - /* - * XXX: hack to make sure we're chrp, assume that if we're - * chrp we have a device_type property -- Cort - */ - node = call_prom("finddevice", 1, 1, "/"); - if (call_prom("getprop", 4, 1, node, - "device_type", type, sizeof(type)) <= 0) - return; - - /* copy the holding pattern code to someplace safe (0) */ - /* the holding pattern is now within the first 0x100 - bytes of the kernel image -- paulus */ - memcpy((void *)0, _stext, 0x100); - flush_icache_range(0, 0x100); - - /* look for cpus */ - *(unsigned long *)(0x0) = 0; - asm volatile("dcbf 0,%0": : "r" (0) : "memory"); - for (node = 0; prom_next_node(&node); ) { - type[0] = 0; - call_prom("getprop", 4, 1, node, "device_type", - type, sizeof(type)); - if (strcmp(type, "cpu") != 0) - continue; - path = (char *) mem; - memset(path, 0, 256); - if (call_prom("package-to-path", 3, 1, node, path, 255) < 0) - continue; - reg = -1; - call_prom("getprop", 4, 1, node, "reg", ®, sizeof(reg)); - cpu = smp_chrp_cpu_nr++; -#ifdef CONFIG_SMP - smp_hw_index[cpu] = reg; -#endif /* CONFIG_SMP */ - /* XXX: hack - don't start cpu 0, this cpu -- Cort */ - if (cpu == 0) - continue; - prom_print("starting cpu "); - prom_print(path); - *(ulong *)(0x4) = 0; - call_prom("start-cpu", 3, 0, node, - (char *)__secondary_hold - _stext, cpu); - prom_print("..."); - for ( i = 0 ; (i < 10000) && (*(ulong *)(0x4) == 0); i++ ) - ; - if (*(ulong *)(0x4) == cpu) - prom_print("ok\n"); - else { - prom_print("failed: "); - prom_print_hex(*(ulong *)0x4); - prom_print("\n"); - } - } -} - -static void __init -prom_instantiate_rtas(void) -{ - ihandle prom_rtas; - prom_arg_t result; - - prom_rtas = call_prom("finddevice", 1, 1, "/rtas"); - if (prom_rtas == -1) - return; - - rtas_size = 0; - call_prom("getprop", 4, 1, prom_rtas, - "rtas-size", &rtas_size, sizeof(rtas_size)); - prom_print("instantiating rtas"); - if (rtas_size == 0) { - rtas_data = 0; - } else { - /* - * Ask OF for some space for RTAS. - * Actually OF has bugs so we just arbitrarily - * use memory at the 6MB point. - */ - rtas_data = 6 << 20; - prom_print(" at "); - prom_print_hex(rtas_data); - } - - prom_rtas = call_prom("open", 1, 1, "/rtas"); - prom_print("..."); - rtas_entry = 0; - if (call_prom_ret("call-method", 3, 2, &result, - "instantiate-rtas", prom_rtas, rtas_data) == 0) - rtas_entry = result; - if ((rtas_entry == -1) || (rtas_entry == 0)) - prom_print(" failed\n"); - else - prom_print(" done\n"); -} - -/* - * We enter here early on, when the Open Firmware prom is still - * handling exceptions and the MMU hash table for us. - */ -unsigned long __init -prom_init(int r3, int r4, prom_entry pp) -{ - unsigned long mem; - ihandle prom_mmu; - unsigned long offset = reloc_offset(); - int i, l; - char *p, *d; - unsigned long phys; - prom_arg_t result[3]; - char model[32]; - phandle node; - int rc; - - /* Default */ - phys = (unsigned long) &_stext; - - /* First get a handle for the stdout device */ - prom = pp; - prom_chosen = call_prom("finddevice", 1, 1, "/chosen"); - if (prom_chosen == -1) - prom_exit(); - if (call_prom("getprop", 4, 1, prom_chosen, "stdout", - &prom_stdout, sizeof(prom_stdout)) <= 0) - prom_exit(); - - /* Get the full OF pathname of the stdout device */ - mem = (unsigned long) klimit + offset; - p = (char *) mem; - memset(p, 0, 256); - call_prom("instance-to-path", 3, 1, prom_stdout, p, 255); - of_stdout_device = p; - mem += strlen(p) + 1; - - /* Get the boot device and translate it to a full OF pathname. */ - p = (char *) mem; - l = call_prom("getprop", 4, 1, prom_chosen, "bootpath", p, 1<<20); - if (l > 0) { - p[l] = 0; /* should already be null-terminated */ - bootpath = PTRUNRELOC(p); - mem += l + 1; - d = (char *) mem; - *d = 0; - call_prom("canon", 3, 1, p, d, 1<<20); - bootdevice = PTRUNRELOC(d); - mem = ALIGNUL(mem + strlen(d) + 1); - } - - prom_instantiate_rtas(); - -#ifdef CONFIG_POWER4 - /* - * Find out how much memory we have and allocate a - * suitably-sized hash table. - */ - prom_alloc_htab(); -#endif - mem = check_display(mem); - - prom_print("copying OF device tree..."); - mem = copy_device_tree(mem, mem + (1<<20)); - prom_print("done\n"); - - prom_hold_cpus(mem); - - klimit = (char *) (mem - offset); - - node = call_prom("finddevice", 1, 1, "/"); - rc = call_prom("getprop", 4, 1, node, "model", model, sizeof(model)); - if (rc > 0 && !strncmp (model, "Pegasos", 7) - && strncmp (model, "Pegasos2", 8)) { - /* Pegasos 1 has a broken translate method in the OF, - * and furthermore the BATs are mapped 1:1 so the phys - * address calculated above is correct, so let's use - * it directly. - */ - } else if (offset == 0) { - /* If we are already running at 0xc0000000, we assume we were - * loaded by an OF bootloader which did set a BAT for us. - * This breaks OF translate so we force phys to be 0. - */ - prom_print("(already at 0xc0000000) phys=0\n"); - phys = 0; - } else if (call_prom("getprop", 4, 1, prom_chosen, "mmu", - &prom_mmu, sizeof(prom_mmu)) <= 0) { - prom_print(" no MMU found\n"); - } else if (call_prom_ret("call-method", 4, 4, result, "translate", - prom_mmu, &_stext, 1) != 0) { - prom_print(" (translate failed)\n"); - } else { - /* We assume the phys. address size is 3 cells */ - phys = result[2]; - } - - if (prom_disp_node != 0) - setup_disp_fake_bi(prom_disp_node); - - /* Use quiesce call to get OF to shut down any devices it's using */ - prom_print("Calling quiesce ...\n"); - call_prom("quiesce", 0, 0); - - /* Relocate various pointers which will be used once the - kernel is running at the address it was linked at. */ - for (i = 0; i < prom_num_displays; ++i) - prom_display_paths[i] = PTRUNRELOC(prom_display_paths[i]); - -#ifdef CONFIG_SERIAL_CORE_CONSOLE - /* Relocate the of stdout for console autodetection */ - of_stdout_device = PTRUNRELOC(of_stdout_device); -#endif - - prom_print("returning 0x"); - prom_print_hex(phys); - prom_print("from prom_init\n"); - prom_stdout = 0; - - return phys; -} - -/* - * early_get_property is used to access the device tree image prepared - * by BootX very early on, before the pointers in it have been relocated. - */ -static void * __init -early_get_property(unsigned long base, unsigned long node, char *prop) -{ - struct device_node *np = (struct device_node *)(base + node); - struct property *pp; - - for (pp = np->properties; pp != 0; pp = pp->next) { - pp = (struct property *) (base + (unsigned long)pp); - if (strcmp((char *)((unsigned long)pp->name + base), - prop) == 0) { - return (void *)((unsigned long)pp->value + base); - } - } - return NULL; -} - -/* Is boot-info compatible ? */ -#define BOOT_INFO_IS_COMPATIBLE(bi) ((bi)->compatible_version <= BOOT_INFO_VERSION) -#define BOOT_INFO_IS_V2_COMPATIBLE(bi) ((bi)->version >= 2) -#define BOOT_INFO_IS_V4_COMPATIBLE(bi) ((bi)->version >= 4) - -void __init -bootx_init(unsigned long r4, unsigned long phys) -{ - boot_infos_t *bi = (boot_infos_t *) r4; - unsigned long space; - unsigned long ptr, x; - char *model; - - boot_infos = PTRUNRELOC(bi); - if (!BOOT_INFO_IS_V2_COMPATIBLE(bi)) - bi->logicalDisplayBase = NULL; - -#ifdef CONFIG_BOOTX_TEXT - btext_init(bi); - - /* - * Test if boot-info is compatible. Done only in config - * CONFIG_BOOTX_TEXT since there is nothing much we can do - * with an incompatible version, except display a message - * and eventually hang the processor... - * - * I'll try to keep enough of boot-info compatible in the - * future to always allow display of this message; - */ - if (!BOOT_INFO_IS_COMPATIBLE(bi)) { - btext_drawstring(" !!! WARNING - Incompatible version of BootX !!!\n\n\n"); - btext_flushscreen(); - } -#endif /* CONFIG_BOOTX_TEXT */ - - /* New BootX enters kernel with MMU off, i/os are not allowed - here. This hack will have been done by the boostrap anyway. - */ - if (bi->version < 4) { - /* - * XXX If this is an iMac, turn off the USB controller. - */ - model = (char *) early_get_property - (r4 + bi->deviceTreeOffset, 4, "model"); - if (model - && (strcmp(model, "iMac,1") == 0 - || strcmp(model, "PowerMac1,1") == 0)) { - out_le32((unsigned *)0x80880008, 1); /* XXX */ - } - } - - /* Move klimit to enclose device tree, args, ramdisk, etc... */ - if (bi->version < 5) { - space = bi->deviceTreeOffset + bi->deviceTreeSize; - if (bi->ramDisk) - space = bi->ramDisk + bi->ramDiskSize; - } else - space = bi->totalParamsSize; - klimit = PTRUNRELOC((char *) bi + space); - - /* New BootX will have flushed all TLBs and enters kernel with - MMU switched OFF, so this should not be useful anymore. - */ - if (bi->version < 4) { - /* - * Touch each page to make sure the PTEs for them - * are in the hash table - the aim is to try to avoid - * getting DSI exceptions while copying the kernel image. - */ - for (ptr = ((unsigned long) &_stext) & PAGE_MASK; - ptr < (unsigned long)bi + space; ptr += PAGE_SIZE) - x = *(volatile unsigned long *)ptr; - } - -#ifdef CONFIG_BOOTX_TEXT - /* - * Note that after we call btext_prepare_BAT, we can't do - * prom_draw*, flushscreen or clearscreen until we turn the MMU - * on, since btext_prepare_BAT sets disp_bi.logicalDisplayBase - * to a virtual address. - */ - btext_prepare_BAT(); -#endif -} diff --git a/arch/ppc/xmon/start.c b/arch/ppc/xmon/start.c index ff86b2d814c..cfc2d6ad464 100644 --- a/arch/ppc/xmon/start.c +++ b/arch/ppc/xmon/start.c @@ -58,7 +58,7 @@ static struct sysrq_key_op sysrq_xmon_op = void xmon_map_scc(void) { -#ifdef CONFIG_PPC_MULTIPLATFORM +#ifdef CONFIG_PPC_PREP volatile unsigned char *base; #elif defined(CONFIG_GEMINI) diff --git a/include/asm-powerpc/processor.h b/include/asm-powerpc/processor.h index 1c64a211cf1..a64198fcfd0 100644 --- a/include/asm-powerpc/processor.h +++ b/include/asm-powerpc/processor.h @@ -53,10 +53,7 @@ #define platform_is_pseries() (_machine == PLATFORM_PSERIES || \ _machine == PLATFORM_PSERIES_LPAR) -#if defined(CONFIG_PPC_MULTIPLATFORM) -extern int _machine; - -#ifdef CONFIG_PPC32 +#ifdef CONFIG_PPC_PREP /* what kind of prep workstation we are */ extern int _prep_type; @@ -70,7 +67,10 @@ extern int _chrp_type; extern unsigned char ucBoardRev; extern unsigned char ucBoardRevMaj, ucBoardRevMin; -#endif /* CONFIG_PPC32 */ +#endif /* CONFIG_PPC_PREP */ + +#if defined(CONFIG_PPC_MULTIPLATFORM) +extern int _machine; #elif defined(CONFIG_PPC_ISERIES) /* diff --git a/include/asm-ppc/machdep.h b/include/asm-ppc/machdep.h index ebbef64e898..2723b423f67 100644 --- a/include/asm-ppc/machdep.h +++ b/include/asm-ppc/machdep.h @@ -104,9 +104,6 @@ struct machdep_calls { unsigned long size, pgprot_t vma_prot); - /* this is for modules, since _machine can be a define -- Cort */ - int ppc_machine; - /* Motherboard/chipset features. This is a kind of general purpose * hook used to control some machine specific features (like reset * lines, chip power control, etc...). diff --git a/include/asm-ppc/prom.h b/include/asm-ppc/prom.h index 6d431d6fb02..adc5ae78492 100644 --- a/include/asm-ppc/prom.h +++ b/include/asm-ppc/prom.h @@ -8,126 +8,19 @@ #ifndef _PPC_PROM_H #define _PPC_PROM_H -#include <linux/config.h> -#include <linux/types.h> - -typedef u32 phandle; -typedef u32 ihandle; - -struct address_range { - unsigned int space; - unsigned int address; - unsigned int size; -}; - -struct interrupt_info { - int line; - int sense; /* +ve/-ve logic, edge or level, etc. */ -}; - +/* This is used in arch/ppc/mm/mem_pieces.h */ struct reg_property { unsigned int address; unsigned int size; }; -struct property { - char *name; - int length; - unsigned char *value; - struct property *next; -}; - -/* - * Note: don't change this structure for now or you'll break BootX ! - */ -struct device_node { - char *name; - char *type; - phandle node; - int n_addrs; - struct address_range *addrs; - int n_intrs; - struct interrupt_info *intrs; - char *full_name; - struct property *properties; - struct device_node *parent; - struct device_node *child; - struct device_node *sibling; - struct device_node *next; /* next device of same type */ - struct device_node *allnext; /* next in list of all nodes */ -}; - -struct prom_args; -typedef void (*prom_entry)(struct prom_args *); - -/* OBSOLETE: Old style node lookup */ -extern struct device_node *find_devices(const char *name); -extern struct device_node *find_type_devices(const char *type); -extern struct device_node *find_path_device(const char *path); -extern struct device_node *find_compatible_devices(const char *type, - const char *compat); -extern struct device_node *find_all_nodes(void); - -/* New style node lookup */ -extern struct device_node *of_find_node_by_name(struct device_node *from, - const char *name); -extern struct device_node *of_find_node_by_type(struct device_node *from, - const char *type); -extern struct device_node *of_find_compatible_node(struct device_node *from, - const char *type, const char *compat); -extern struct device_node *of_find_node_by_path(const char *path); -extern struct device_node *of_find_all_nodes(struct device_node *prev); -extern struct device_node *of_get_parent(const struct device_node *node); -extern struct device_node *of_get_next_child(const struct device_node *node, - struct device_node *prev); -extern struct device_node *of_node_get(struct device_node *node); -extern void of_node_put(struct device_node *node); - -/* Other Prototypes */ -extern void abort(void); -extern unsigned long prom_init(int, int, prom_entry); -extern void prom_print(const char *msg); -extern void relocate_nodes(void); -extern void finish_device_tree(void); -extern int device_is_compatible(struct device_node *device, const char *); -extern int machine_is_compatible(const char *compat); -extern unsigned char *get_property(struct device_node *node, const char *name, - int *lenp); -extern int prom_add_property(struct device_node* np, struct property* prop); -extern void prom_get_irq_senses(unsigned char *, int, int); -extern int prom_n_addr_cells(struct device_node* np); -extern int prom_n_size_cells(struct device_node* np); - -extern struct resource* -request_OF_resource(struct device_node* node, int index, const char* name_postfix); -extern int release_OF_resource(struct device_node* node, int index); - -extern void print_properties(struct device_node *node); -extern int call_rtas(const char *service, int nargs, int nret, - unsigned long *outputs, ...); - /* - * PCI <-> OF matching functions - */ -struct pci_bus; -struct pci_dev; -extern int pci_device_from_OF_node(struct device_node *node, - u8* bus, u8* devfn); -extern struct device_node* pci_busdev_to_OF_node(struct pci_bus *, int); -extern struct device_node* pci_device_to_OF_node(struct pci_dev *); -extern void pci_create_OF_bus_map(void); - -/* - * When we call back to the Open Firmware client interface, we usually - * have to do that before the kernel is relocated to its final location - * (this is because we can't use OF after we have overwritten the - * exception vectors with our exception handlers). These macros assist - * in performing the address calculations that we need to do to access - * data when the kernel is running at an address that is different from - * the address that the kernel is linked at. The reloc_offset() function - * returns the difference between these two addresses and the macros - * simplify the process of adding or subtracting this offset to/from - * pointer values. See arch/ppc/kernel/prom.c for how these are used. + * These macros assist in performing the address calculations that we + * need to do to access data when the kernel is running at an address + * that is different from the address that the kernel is linked at. + * The reloc_offset() function returns the difference between these + * two addresses and the macros simplify the process of adding or + * subtracting this offset to/from pointer values. */ extern unsigned long reloc_offset(void); extern unsigned long add_reloc_offset(unsigned long); @@ -136,45 +29,12 @@ extern unsigned long sub_reloc_offset(unsigned long); #define PTRRELOC(x) ((typeof(x))add_reloc_offset((unsigned long)(x))) #define PTRUNRELOC(x) ((typeof(x))sub_reloc_offset((unsigned long)(x))) - -/* - * OF address retreival & translation - */ - - -/* Translate an OF address block into a CPU physical address - */ -#define OF_BAD_ADDR ((u64)-1) -extern u64 of_translate_address(struct device_node *np, u32 *addr); - -/* Extract an address from a device, returns the region size and - * the address space flags too. The PCI version uses a BAR number - * instead of an absolute index - */ -extern u32 *of_get_address(struct device_node *dev, int index, - u64 *size, unsigned int *flags); -extern u32 *of_get_pci_address(struct device_node *dev, int bar_no, - u64 *size, unsigned int *flags); - -/* Get an address as a resource. Note that if your address is - * a PIO address, the conversion will fail if the physical address - * can't be internally converted to an IO token with - * pci_address_to_pio(), that is because it's either called to early - * or it can't be matched to any host bridge IO space - */ -extern int of_address_to_resource(struct device_node *dev, int index, - struct resource *r); -extern int of_pci_address_to_resource(struct device_node *dev, int bar, - struct resource *r); - -#ifndef CONFIG_PPC_OF /* - * Fallback definitions for builds where we don't have prom.c included. + * Fallback definitions since we don't support OF in arch/ppc any more. */ #define machine_is_compatible(x) 0 #define of_find_compatible_node(f, t, c) NULL #define get_property(p, n, l) NULL -#endif #endif /* _PPC_PROM_H */ #endif /* __KERNEL__ */ diff --git a/include/asm-ppc/serial.h b/include/asm-ppc/serial.h index 485a924e4d0..b74af546156 100644 --- a/include/asm-ppc/serial.h +++ b/include/asm-ppc/serial.h @@ -41,15 +41,10 @@ #else /* - * XXX Assume for now it has PC-style ISA serial ports. - * This is true for PReP and CHRP at least. + * XXX Assume it has PC-style ISA serial ports - true for PReP at least. */ #include <asm/pc_serial.h> -#if defined(CONFIG_MAC_SERIAL) -#define SERIAL_DEV_OFFSET ((_machine == _MACH_prep || _machine == _MACH_chrp) ? 0 : 2) -#endif - #endif /* !CONFIG_GEMINI and others */ #endif /* __ASM_SERIAL_H__ */ #endif /* __KERNEL__ */ |