csiostor: Add T5 adapter operations.

This patch creates a new file for T5 adapter operations.

Signed-off-by: Arvind Bhushan <arvindb@chelsio.com>
Signed-off-by: Naresh Kumar Inna <naresh@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

1 files changed, 397 insertions, 0 deletions

diff --git a/drivers/scsi/csiostor/csio_hw_t5.c b/drivers/scsi/csiostor/csio_hw_t5.c
new file mode 100644
index 00000000000..27745c170c2
--- /dev/null
+++ b/drivers/scsi/csiostor/csio_hw_t5.c
@@ -0,0 +1,397 @@
+/*
+ * This file is part of the Chelsio FCoE driver for Linux.
+ *
+ * Copyright (c) 2008-2013 Chelsio Communications, Inc. All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses.  You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * OpenIB.org BSD license below:
+ *
+ *     Redistribution and use in source and binary forms, with or
+ *     without modification, are permitted provided that the following
+ *     conditions are met:
+ *
+ *      - Redistributions of source code must retain the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer.
+ *
+ *      - Redistributions in binary form must reproduce the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer in the documentation and/or other materials
+ *        provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+#include "csio_hw.h"
+#include "csio_init.h"
+
+static int
+csio_t5_set_mem_win(struct csio_hw *hw, uint32_t win)
+{
+	u32 mem_win_base;
+	/*
+	 * Truncation intentional: we only read the bottom 32-bits of the
+	 * 64-bit BAR0/BAR1 ...  We use the hardware backdoor mechanism to
+	 * read BAR0 instead of using pci_resource_start() because we could be
+	 * operating from within a Virtual Machine which is trapping our
+	 * accesses to our Configuration Space and we need to set up the PCI-E
+	 * Memory Window decoders with the actual addresses which will be
+	 * coming across the PCI-E link.
+	 */
+
+	/* For T5, only relative offset inside the PCIe BAR is passed */
+	mem_win_base = MEMWIN_BASE;
+
+	/*
+	 * Set up memory window for accessing adapter memory ranges.  (Read
+	 * back MA register to ensure that changes propagate before we attempt
+	 * to use the new values.)
+	 */
+	csio_wr_reg32(hw, mem_win_base | BIR(0) |
+			  WINDOW(ilog2(MEMWIN_APERTURE) - 10),
+			  PCIE_MEM_ACCESS_REG(PCIE_MEM_ACCESS_BASE_WIN, win));
+	csio_rd_reg32(hw,
+		      PCIE_MEM_ACCESS_REG(PCIE_MEM_ACCESS_BASE_WIN, win));
+
+	return 0;
+}
+
+/*
+ * Interrupt handler for the PCIE module.
+ */
+static void
+csio_t5_pcie_intr_handler(struct csio_hw *hw)
+{
+	static struct intr_info sysbus_intr_info[] = {
+		{ RNPP, "RXNP array parity error", -1, 1 },
+		{ RPCP, "RXPC array parity error", -1, 1 },
+		{ RCIP, "RXCIF array parity error", -1, 1 },
+		{ RCCP, "Rx completions control array parity error", -1, 1 },
+		{ RFTP, "RXFT array parity error", -1, 1 },
+		{ 0, NULL, 0, 0 }
+	};
+	static struct intr_info pcie_port_intr_info[] = {
+		{ TPCP, "TXPC array parity error", -1, 1 },
+		{ TNPP, "TXNP array parity error", -1, 1 },
+		{ TFTP, "TXFT array parity error", -1, 1 },
+		{ TCAP, "TXCA array parity error", -1, 1 },
+		{ TCIP, "TXCIF array parity error", -1, 1 },
+		{ RCAP, "RXCA array parity error", -1, 1 },
+		{ OTDD, "outbound request TLP discarded", -1, 1 },
+		{ RDPE, "Rx data parity error", -1, 1 },
+		{ TDUE, "Tx uncorrectable data error", -1, 1 },
+		{ 0, NULL, 0, 0 }
+	};
+
+	static struct intr_info pcie_intr_info[] = {
+		{ MSTGRPPERR, "Master Response Read Queue parity error",
+		-1, 1 },
+		{ MSTTIMEOUTPERR, "Master Timeout FIFO parity error", -1, 1 },
+		{ MSIXSTIPERR, "MSI-X STI SRAM parity error", -1, 1 },
+		{ MSIXADDRLPERR, "MSI-X AddrL parity error", -1, 1 },
+		{ MSIXADDRHPERR, "MSI-X AddrH parity error", -1, 1 },
+		{ MSIXDATAPERR, "MSI-X data parity error", -1, 1 },
+		{ MSIXDIPERR, "MSI-X DI parity error", -1, 1 },
+		{ PIOCPLGRPPERR, "PCI PIO completion Group FIFO parity error",
+		-1, 1 },
+		{ PIOREQGRPPERR, "PCI PIO request Group FIFO parity error",
+		-1, 1 },
+		{ TARTAGPERR, "PCI PCI target tag FIFO parity error", -1, 1 },
+		{ MSTTAGQPERR, "PCI master tag queue parity error", -1, 1 },
+		{ CREQPERR, "PCI CMD channel request parity error", -1, 1 },
+		{ CRSPPERR, "PCI CMD channel response parity error", -1, 1 },
+		{ DREQWRPERR, "PCI DMA channel write request parity error",
+		-1, 1 },
+		{ DREQPERR, "PCI DMA channel request parity error", -1, 1 },
+		{ DRSPPERR, "PCI DMA channel response parity error", -1, 1 },
+		{ HREQWRPERR, "PCI HMA channel count parity error", -1, 1 },
+		{ HREQPERR, "PCI HMA channel request parity error", -1, 1 },
+		{ HRSPPERR, "PCI HMA channel response parity error", -1, 1 },
+		{ CFGSNPPERR, "PCI config snoop FIFO parity error", -1, 1 },
+		{ FIDPERR, "PCI FID parity error", -1, 1 },
+		{ VFIDPERR, "PCI INTx clear parity error", -1, 1 },
+		{ MAGRPPERR, "PCI MA group FIFO parity error", -1, 1 },
+		{ PIOTAGPERR, "PCI PIO tag parity error", -1, 1 },
+		{ IPRXHDRGRPPERR, "PCI IP Rx header group parity error",
+		-1, 1 },
+		{ IPRXDATAGRPPERR, "PCI IP Rx data group parity error",
+		-1, 1 },
+		{ RPLPERR, "PCI IP replay buffer parity error", -1, 1 },
+		{ IPSOTPERR, "PCI IP SOT buffer parity error", -1, 1 },
+		{ TRGT1GRPPERR, "PCI TRGT1 group FIFOs parity error", -1, 1 },
+		{ READRSPERR, "Outbound read error", -1, 0 },
+		{ 0, NULL, 0, 0 }
+	};
+
+	int fat;
+	fat = csio_handle_intr_status(hw,
+				      PCIE_CORE_UTL_SYSTEM_BUS_AGENT_STATUS,
+				      sysbus_intr_info) +
+	      csio_handle_intr_status(hw,
+				      PCIE_CORE_UTL_PCI_EXPRESS_PORT_STATUS,
+				      pcie_port_intr_info) +
+	      csio_handle_intr_status(hw, PCIE_INT_CAUSE, pcie_intr_info);
+	if (fat)
+		csio_hw_fatal_err(hw);
+}
+
+/*
+ * csio_t5_flash_cfg_addr - return the address of the flash configuration file
+ * @hw: the HW module
+ *
+ * Return the address within the flash where the Firmware Configuration
+ * File is stored.
+ */
+static unsigned int
+csio_t5_flash_cfg_addr(struct csio_hw *hw)
+{
+	return FLASH_CFG_START;
+}
+
+/*
+ *      csio_t5_mc_read - read from MC through backdoor accesses
+ *      @hw: the hw module
+ *      @idx: index to the register
+ *      @addr: address of first byte requested
+ *      @data: 64 bytes of data containing the requested address
+ *      @ecc: where to store the corresponding 64-bit ECC word
+ *
+ *      Read 64 bytes of data from MC starting at a 64-byte-aligned address
+ *      that covers the requested address @addr.  If @parity is not %NULL it
+ *      is assigned the 64-bit ECC word for the read data.
+ */
+static int
+csio_t5_mc_read(struct csio_hw *hw, int idx, uint32_t addr, __be32 *data,
+		uint64_t *ecc)
+{
+	int i;
+	uint32_t mc_bist_cmd_reg, mc_bist_cmd_addr_reg, mc_bist_cmd_len_reg;
+	uint32_t mc_bist_status_rdata_reg, mc_bist_data_pattern_reg;
+
+	mc_bist_cmd_reg = MC_REG(MC_P_BIST_CMD, idx);
+	mc_bist_cmd_addr_reg = MC_REG(MC_P_BIST_CMD_ADDR, idx);
+	mc_bist_cmd_len_reg = MC_REG(MC_P_BIST_CMD_LEN, idx);
+	mc_bist_status_rdata_reg = MC_REG(MC_P_BIST_STATUS_RDATA, idx);
+	mc_bist_data_pattern_reg = MC_REG(MC_P_BIST_DATA_PATTERN, idx);
+
+	if (csio_rd_reg32(hw, mc_bist_cmd_reg) & START_BIST)
+		return -EBUSY;
+	csio_wr_reg32(hw, addr & ~0x3fU, mc_bist_cmd_addr_reg);
+	csio_wr_reg32(hw, 64, mc_bist_cmd_len_reg);
+	csio_wr_reg32(hw, 0xc, mc_bist_data_pattern_reg);
+	csio_wr_reg32(hw, BIST_OPCODE(1) | START_BIST |  BIST_CMD_GAP(1),
+		      mc_bist_cmd_reg);
+	i = csio_hw_wait_op_done_val(hw, mc_bist_cmd_reg, START_BIST,
+				     0, 10, 1, NULL);
+	if (i)
+		return i;
+
+#define MC_DATA(i) MC_BIST_STATUS_REG(MC_BIST_STATUS_RDATA, i)
+
+	for (i = 15; i >= 0; i--)
+		*data++ = htonl(csio_rd_reg32(hw, MC_DATA(i)));
+	if (ecc)
+		*ecc = csio_rd_reg64(hw, MC_DATA(16));
+#undef MC_DATA
+	return 0;
+}
+
+/*
+ *      csio_t5_edc_read - read from EDC through backdoor accesses
+ *      @hw: the hw module
+ *      @idx: which EDC to access
+ *      @addr: address of first byte requested
+ *      @data: 64 bytes of data containing the requested address
+ *      @ecc: where to store the corresponding 64-bit ECC word
+ *
+ *      Read 64 bytes of data from EDC starting at a 64-byte-aligned address
+ *      that covers the requested address @addr.  If @parity is not %NULL it
+ *      is assigned the 64-bit ECC word for the read data.
+ */
+static int
+csio_t5_edc_read(struct csio_hw *hw, int idx, uint32_t addr, __be32 *data,
+		uint64_t *ecc)
+{
+	int i;
+	uint32_t edc_bist_cmd_reg, edc_bist_cmd_addr_reg, edc_bist_cmd_len_reg;
+	uint32_t edc_bist_cmd_data_pattern, edc_bist_status_rdata_reg;
+
+/*
+ * These macro are missing in t4_regs.h file.
+ */
+#define EDC_STRIDE_T5 (EDC_T51_BASE_ADDR - EDC_T50_BASE_ADDR)
+#define EDC_REG_T5(reg, idx) (reg + EDC_STRIDE_T5 * idx)
+
+	edc_bist_cmd_reg = EDC_REG_T5(EDC_H_BIST_CMD, idx);
+	edc_bist_cmd_addr_reg = EDC_REG_T5(EDC_H_BIST_CMD_ADDR, idx);
+	edc_bist_cmd_len_reg = EDC_REG_T5(EDC_H_BIST_CMD_LEN, idx);
+	edc_bist_cmd_data_pattern = EDC_REG_T5(EDC_H_BIST_DATA_PATTERN, idx);
+	edc_bist_status_rdata_reg = EDC_REG_T5(EDC_H_BIST_STATUS_RDATA, idx);
+#undef EDC_REG_T5
+#undef EDC_STRIDE_T5
+
+	if (csio_rd_reg32(hw, edc_bist_cmd_reg) & START_BIST)
+		return -EBUSY;
+	csio_wr_reg32(hw, addr & ~0x3fU, edc_bist_cmd_addr_reg);
+	csio_wr_reg32(hw, 64, edc_bist_cmd_len_reg);
+	csio_wr_reg32(hw, 0xc, edc_bist_cmd_data_pattern);
+	csio_wr_reg32(hw, BIST_OPCODE(1) | START_BIST |  BIST_CMD_GAP(1),
+		      edc_bist_cmd_reg);
+	i = csio_hw_wait_op_done_val(hw, edc_bist_cmd_reg, START_BIST,
+				     0, 10, 1, NULL);
+	if (i)
+		return i;
+
+#define EDC_DATA(i) (EDC_BIST_STATUS_REG(EDC_BIST_STATUS_RDATA, i) + idx)
+
+	for (i = 15; i >= 0; i--)
+		*data++ = htonl(csio_rd_reg32(hw, EDC_DATA(i)));
+	if (ecc)
+		*ecc = csio_rd_reg64(hw, EDC_DATA(16));
+#undef EDC_DATA
+	return 0;
+}
+
+/*
+ * csio_t5_memory_rw - read/write EDC 0, EDC 1 or MC via PCIE memory window
+ * @hw: the csio_hw
+ * @win: PCI-E memory Window to use
+ * @mtype: memory type: MEM_EDC0, MEM_EDC1, MEM_MC0 (or MEM_MC) or MEM_MC1
+ * @addr: address within indicated memory type
+ * @len: amount of memory to transfer
+ * @buf: host memory buffer
+ * @dir: direction of transfer 1 => read, 0 => write
+ *
+ * Reads/writes an [almost] arbitrary memory region in the firmware: the
+ * firmware memory address, length and host buffer must be aligned on
+ * 32-bit boudaries.  The memory is transferred as a raw byte sequence
+ * from/to the firmware's memory.  If this memory contains data
+ * structures which contain multi-byte integers, it's the callers
+ * responsibility to perform appropriate byte order conversions.
+ */
+static int
+csio_t5_memory_rw(struct csio_hw *hw, u32 win, int mtype, u32 addr,
+		u32 len, uint32_t *buf, int dir)
+{
+	u32 pos, start, offset, memoffset;
+	u32 edc_size, mc_size, win_pf, mem_reg, mem_aperture, mem_base;
+
+	/*
+	 * Argument sanity checks ...
+	 */
+	if ((addr & 0x3) || (len & 0x3))
+		return -EINVAL;
+
+	/* Offset into the region of memory which is being accessed
+	 * MEM_EDC0 = 0
+	 * MEM_EDC1 = 1
+	 * MEM_MC   = 2 -- T4
+	 * MEM_MC0  = 2 -- For T5
+	 * MEM_MC1  = 3 -- For T5
+	 */
+	edc_size  = EDRAM_SIZE_GET(csio_rd_reg32(hw, MA_EDRAM0_BAR));
+	if (mtype != MEM_MC1)
+		memoffset = (mtype * (edc_size * 1024 * 1024));
+	else {
+		mc_size = EXT_MEM_SIZE_GET(csio_rd_reg32(hw,
+							 MA_EXT_MEMORY_BAR));
+		memoffset = (MEM_MC0 * edc_size + mc_size) * 1024 * 1024;
+	}
+
+	/* Determine the PCIE_MEM_ACCESS_OFFSET */
+	addr = addr + memoffset;
+
+	/*
+	 * Each PCI-E Memory Window is programmed with a window size -- or
+	 * "aperture" -- which controls the granularity of its mapping onto
+	 * adapter memory.  We need to grab that aperture in order to know
+	 * how to use the specified window.  The window is also programmed
+	 * with the base address of the Memory Window in BAR0's address
+	 * space.  For T4 this is an absolute PCI-E Bus Address.  For T5
+	 * the address is relative to BAR0.
+	 */
+	mem_reg = csio_rd_reg32(hw,
+			PCIE_MEM_ACCESS_REG(PCIE_MEM_ACCESS_BASE_WIN, win));
+	mem_aperture = 1 << (WINDOW(mem_reg) + 10);
+	mem_base = GET_PCIEOFST(mem_reg) << 10;
+
+	start = addr & ~(mem_aperture-1);
+	offset = addr - start;
+	win_pf = V_PFNUM(hw->pfn);
+
+	csio_dbg(hw, "csio_t5_memory_rw: mem_reg: 0x%x, mem_aperture: 0x%x\n",
+		 mem_reg, mem_aperture);
+	csio_dbg(hw, "csio_t5_memory_rw: mem_base: 0x%x, mem_offset: 0x%x\n",
+		 mem_base, memoffset);
+	csio_dbg(hw, "csio_t5_memory_rw: start:0x%x, offset:0x%x, win_pf:%d\n",
+		 start, offset, win_pf);
+	csio_dbg(hw, "csio_t5_memory_rw: mtype: %d, addr: 0x%x, len: %d\n",
+		 mtype, addr, len);
+
+	for (pos = start; len > 0; pos += mem_aperture, offset = 0) {
+		/*
+		 * Move PCI-E Memory Window to our current transfer
+		 * position.  Read it back to ensure that changes propagate
+		 * before we attempt to use the new value.
+		 */
+		csio_wr_reg32(hw, pos | win_pf,
+			PCIE_MEM_ACCESS_REG(PCIE_MEM_ACCESS_OFFSET, win));
+		csio_rd_reg32(hw,
+			PCIE_MEM_ACCESS_REG(PCIE_MEM_ACCESS_OFFSET, win));
+
+		while (offset < mem_aperture && len > 0) {
+			if (dir)
+				*buf++ = csio_rd_reg32(hw, mem_base + offset);
+			else
+				csio_wr_reg32(hw, *buf++, mem_base + offset);
+
+			offset += sizeof(__be32);
+			len -= sizeof(__be32);
+		}
+	}
+	return 0;
+}
+
+/*
+ * csio_t5_dfs_create_ext_mem - setup debugfs for MC0 or MC1 to read the values
+ * @hw: the csio_hw
+ *
+ * This function creates files in the debugfs with external memory region
+ * MC0 & MC1.
+ */
+static void
+csio_t5_dfs_create_ext_mem(struct csio_hw *hw)
+{
+	u32 size;
+	int i = csio_rd_reg32(hw, MA_TARGET_MEM_ENABLE);
+	if (i & EXT_MEM_ENABLE) {
+		size = csio_rd_reg32(hw, MA_EXT_MEMORY_BAR);
+		csio_add_debugfs_mem(hw, "mc0", MEM_MC0,
+				     EXT_MEM_SIZE_GET(size));
+	}
+	if (i & EXT_MEM1_ENABLE) {
+		size = csio_rd_reg32(hw, MA_EXT_MEMORY1_BAR);
+		csio_add_debugfs_mem(hw, "mc1", MEM_MC1,
+				     EXT_MEM_SIZE_GET(size));
+	}
+}
+
+/* T5 adapter specific function */
+struct csio_hw_chip_ops t5_ops = {
+	.chip_set_mem_win		= csio_t5_set_mem_win,
+	.chip_pcie_intr_handler		= csio_t5_pcie_intr_handler,
+	.chip_flash_cfg_addr		= csio_t5_flash_cfg_addr,
+	.chip_mc_read			= csio_t5_mc_read,
+	.chip_edc_read			= csio_t5_edc_read,
+	.chip_memory_rw			= csio_t5_memory_rw,
+	.chip_dfs_create_ext_mem	= csio_t5_dfs_create_ext_mem,
+};