[MIPS] Remove Momenco Jaguar ATX support

It has some hackish code and it odd DMA results in the need to support
old features in kernel code.

Signed-off-by: Franck Bui-Huu <fbuihuu@gmail.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

19 files changed, 1 insertions, 2401 deletions

diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index ea3c53966df..515c5a69804 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -369,28 +369,6 @@ config MIPS_SIM
 	  This option enables support for MIPS Technologies MIPSsim software
 	  emulator.
 
-config MOMENCO_JAGUAR_ATX
-	bool "Momentum Jaguar board"
-	select BOOT_ELF32
-	select DMA_NONCOHERENT
-	select HW_HAS_PCI
-	select IRQ_CPU
-	select IRQ_CPU_RM7K
-	select IRQ_MV64340
-	select LIMITED_DMA
-	select PCI_MARVELL
-	select RM7000_CPU_SCACHE
-	select SWAP_IO_SPACE
-	select SYS_HAS_CPU_RM9000
-	select SYS_HAS_EARLY_PRINTK
-	select SYS_SUPPORTS_32BIT_KERNEL
-	select SYS_SUPPORTS_64BIT_KERNEL
-	select SYS_SUPPORTS_BIG_ENDIAN
-	select SYS_SUPPORTS_KGDB
-	help
-	  The Jaguar ATX is a MIPS-based Single Board Computer (SBC) made by
-	  Momentum Computer <http://www.momenco.com/>.
-
 config MOMENCO_OCELOT
 	bool "Momentum Ocelot board"
 	select DMA_NONCOHERENT
@@ -806,7 +784,6 @@ source "arch/mips/ddb5xxx/Kconfig"
 source "arch/mips/gt64120/ev64120/Kconfig"
 source "arch/mips/jazz/Kconfig"
 source "arch/mips/lasat/Kconfig"
-source "arch/mips/momentum/Kconfig"
 source "arch/mips/pmc-sierra/Kconfig"
 source "arch/mips/sgi-ip27/Kconfig"
 source "arch/mips/sibyte/Kconfig"
diff --git a/arch/mips/Makefile b/arch/mips/Makefile
index 3c85c396504..a68d462a415 100644
--- a/arch/mips/Makefile
+++ b/arch/mips/Makefile
@@ -379,17 +379,6 @@ cflags-$(CONFIG_BASLER_EXCITE)	+= -Iinclude/asm-mips/mach-excite
 load-$(CONFIG_BASLER_EXCITE)	+= 0x80100000
 
 #
-# Momentum Jaguar ATX
-#
-core-$(CONFIG_MOMENCO_JAGUAR_ATX)	+= arch/mips/momentum/jaguar_atx/
-cflags-$(CONFIG_MOMENCO_JAGUAR_ATX)	+= -Iinclude/asm-mips/mach-ja
-#ifdef CONFIG_JAGUAR_DMALOW
-#load-$(CONFIG_MOMENCO_JAGUAR_ATX)	+= 0xffffffff88000000
-#else
-load-$(CONFIG_MOMENCO_JAGUAR_ATX)	+= 0xffffffff80100000
-#endif
-
-#
 # NEC DDB
 #
 core-$(CONFIG_DDB5XXX_COMMON)	+= arch/mips/ddb5xxx/common/
diff --git a/arch/mips/configs/jaguar-atx_defconfig b/arch/mips/configs/jaguar-atx_defconfig
deleted file mode 100644
index 083104daa2c..00000000000
--- a/arch/mips/configs/jaguar-atx_defconfig
+++ /dev/null
@@ -1,897 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.20
-# Tue Feb 20 21:47:33 2007
-#
-CONFIG_MIPS=y
-
-#
-# Machine selection
-#
-CONFIG_ZONE_DMA=y
-# CONFIG_MIPS_MTX1 is not set
-# CONFIG_MIPS_BOSPORUS is not set
-# CONFIG_MIPS_PB1000 is not set
-# CONFIG_MIPS_PB1100 is not set
-# CONFIG_MIPS_PB1500 is not set
-# CONFIG_MIPS_PB1550 is not set
-# CONFIG_MIPS_PB1200 is not set
-# CONFIG_MIPS_DB1000 is not set
-# CONFIG_MIPS_DB1100 is not set
-# CONFIG_MIPS_DB1500 is not set
-# CONFIG_MIPS_DB1550 is not set
-# CONFIG_MIPS_DB1200 is not set
-# CONFIG_MIPS_MIRAGE is not set
-# CONFIG_BASLER_EXCITE is not set
-# CONFIG_MIPS_COBALT is not set
-# CONFIG_MACH_DECSTATION is not set
-# CONFIG_MIPS_EV64120 is not set
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_LASAT is not set
-# CONFIG_MIPS_ATLAS is not set
-# CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SEAD is not set
-# CONFIG_WR_PPMC is not set
-# CONFIG_MIPS_SIM is not set
-CONFIG_MOMENCO_JAGUAR_ATX=y
-# CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_3 is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
-# CONFIG_MOMENCO_OCELOT_G is not set
-# CONFIG_MIPS_XXS1500 is not set
-# CONFIG_PNX8550_JBS is not set
-# CONFIG_PNX8550_STB810 is not set
-# CONFIG_DDB5477 is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_PMC_YOSEMITE is not set
-# CONFIG_QEMU is not set
-# CONFIG_MARKEINS is not set
-# CONFIG_SGI_IP22 is not set
-# CONFIG_SGI_IP27 is not set
-# CONFIG_SGI_IP32 is not set
-# CONFIG_SIBYTE_BIGSUR is not set
-# CONFIG_SIBYTE_SWARM is not set
-# CONFIG_SIBYTE_SENTOSA is not set
-# CONFIG_SIBYTE_RHONE is not set
-# CONFIG_SIBYTE_CARMEL is not set
-# CONFIG_SIBYTE_PTSWARM is not set
-# CONFIG_SIBYTE_LITTLESUR is not set
-# CONFIG_SIBYTE_CRHINE is not set
-# CONFIG_SIBYTE_CRHONE is not set
-# CONFIG_SNI_RM is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
-# CONFIG_TOSHIBA_RBTX4927 is not set
-# CONFIG_TOSHIBA_RBTX4938 is not set
-CONFIG_JAGUAR_DMALOW=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_TIME=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
-# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set
-CONFIG_DMA_NONCOHERENT=y
-CONFIG_DMA_NEED_PCI_MAP_STATE=y
-CONFIG_LIMITED_DMA=y
-CONFIG_CPU_BIG_ENDIAN=y
-# CONFIG_CPU_LITTLE_ENDIAN is not set
-CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
-CONFIG_IRQ_CPU=y
-CONFIG_IRQ_CPU_RM7K=y
-CONFIG_IRQ_MV64340=y
-CONFIG_PCI_MARVELL=y
-CONFIG_SWAP_IO_SPACE=y
-CONFIG_BOOT_ELF32=y
-CONFIG_MIPS_L1_CACHE_SHIFT=5
-
-#
-# CPU selection
-#
-# CONFIG_CPU_MIPS32_R1 is not set
-# CONFIG_CPU_MIPS32_R2 is not set
-# CONFIG_CPU_MIPS64_R1 is not set
-# CONFIG_CPU_MIPS64_R2 is not set
-# CONFIG_CPU_R3000 is not set
-# CONFIG_CPU_TX39XX is not set
-# CONFIG_CPU_VR41XX is not set
-# CONFIG_CPU_R4300 is not set
-# CONFIG_CPU_R4X00 is not set
-# CONFIG_CPU_TX49XX is not set
-# CONFIG_CPU_R5000 is not set
-# CONFIG_CPU_R5432 is not set
-# CONFIG_CPU_R6000 is not set
-# CONFIG_CPU_NEVADA is not set
-# CONFIG_CPU_R8000 is not set
-# CONFIG_CPU_R10000 is not set
-# CONFIG_CPU_RM7000 is not set
-CONFIG_CPU_RM9000=y
-# CONFIG_CPU_SB1 is not set
-CONFIG_SYS_HAS_CPU_RM9000=y
-CONFIG_WEAK_ORDERING=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
-
-#
-# Kernel type
-#
-CONFIG_32BIT=y
-# CONFIG_64BIT is not set
-CONFIG_PAGE_SIZE_4KB=y
-# CONFIG_PAGE_SIZE_8KB is not set
-# CONFIG_PAGE_SIZE_16KB is not set
-# CONFIG_PAGE_SIZE_64KB is not set
-CONFIG_BOARD_SCACHE=y
-CONFIG_RM7000_CPU_SCACHE=y
-CONFIG_CPU_HAS_PREFETCH=y
-CONFIG_MIPS_MT_DISABLED=y
-# CONFIG_MIPS_MT_SMP is not set
-# CONFIG_MIPS_MT_SMTC is not set
-# CONFIG_MIPS_VPE_LOADER is not set
-# CONFIG_64BIT_PHYS_ADDR is not set
-CONFIG_CPU_HAS_LLSC=y
-CONFIG_CPU_HAS_SYNC=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_HIGHMEM=y
-CONFIG_CPU_SUPPORTS_HIGHMEM=y
-CONFIG_SYS_SUPPORTS_HIGHMEM=y
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-# CONFIG_HZ_48 is not set
-# CONFIG_HZ_100 is not set
-# CONFIG_HZ_128 is not set
-# CONFIG_HZ_250 is not set
-# CONFIG_HZ_256 is not set
-CONFIG_HZ_1000=y
-# CONFIG_HZ_1024 is not set
-CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_HZ=1000
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# Code maturity level options
-#
-# CONFIG_EXPERIMENTAL is not set
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
-# CONFIG_AUDIT is not set
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_RELAY=y
-CONFIG_SYSCTL=y
-CONFIG_EMBEDDED=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SHMEM=y
-CONFIG_SLAB=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODVERSIONS is not set
-CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_KMOD=y
-
-#
-# Block layer
-#
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# Bus options (PCI, PCMCIA, EISA, ISA, TC)
-#
-CONFIG_HW_HAS_PCI=y
-CONFIG_PCI=y
-CONFIG_MMU=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# PCI Hotplug Support
-#
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
-CONFIG_TRAD_SIGNALS=y
-
-#
-# Power management options
-#
-CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
-# CONFIG_PM_DEBUG is not set
-# CONFIG_PM_SYSFS_DEPRECATED is not set
-
-#
-# Networking
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_NETDEBUG is not set
-# CONFIG_PACKET is not set
-CONFIG_UNIX=y
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-CONFIG_INET_TUNNEL=m
-CONFIG_INET_XFRM_MODE_TRANSPORT=m
-CONFIG_INET_XFRM_MODE_TUNNEL=m
-CONFIG_INET_XFRM_MODE_BEET=m
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-CONFIG_IPV6=m
-CONFIG_IPV6_PRIVACY=y
-CONFIG_IPV6_ROUTER_PREF=y
-CONFIG_INET6_AH=m
-CONFIG_INET6_ESP=m
-CONFIG_INET6_IPCOMP=m
-CONFIG_INET6_XFRM_TUNNEL=m
-CONFIG_INET6_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_TRANSPORT=m
-CONFIG_INET6_XFRM_MODE_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_BEET=m
-CONFIG_IPV6_SIT=m
-CONFIG_IPV6_TUNNEL=m
-CONFIG_NETWORK_SECMARK=y
-# CONFIG_NETFILTER is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-CONFIG_IEEE80211=m
-# CONFIG_IEEE80211_DEBUG is not set
-CONFIG_IEEE80211_CRYPT_WEP=m
-CONFIG_IEEE80211_CRYPT_CCMP=m
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
-# CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-CONFIG_CONNECTOR=m
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNPACPI is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CDROM_PKTCDVD=m
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-CONFIG_ATA_OVER_ETH=m
-
-#
-# Misc devices
-#
-CONFIG_SGI_IOC4=m
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_RAID_ATTRS=m
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_NETLINK is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
-# CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-
-#
-# Network device support
-#
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# PHY device support
-#
-CONFIG_PHYLIB=m
-
-#
-# MII PHY device drivers
-#
-CONFIG_MARVELL_PHY=m
-CONFIG_DAVICOM_PHY=m
-CONFIG_QSEMI_PHY=m
-CONFIG_LXT_PHY=m
-CONFIG_CICADA_PHY=m
-CONFIG_VITESSE_PHY=m
-CONFIG_SMSC_PHY=m
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_FIXED_PHY is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_DM9000 is not set
-
-#
-# Tulip family network device support
-#
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
-# CONFIG_DGRS is not set
-CONFIG_EEPRO100=y
-# CONFIG_E100 is not set
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139TOO is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_VIA_RHINE is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-CONFIG_MV643XX_ETH=y
-CONFIG_QLA3XXX=m
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_CHELSIO_T1 is not set
-CONFIG_CHELSIO_T3=m
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-# CONFIG_MYRI10GE is not set
-CONFIG_NETXEN_NIC=m
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-# CONFIG_INPUT is not set
-
-#
-# Hardware I/O ports
-#
-# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-# CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_PCI=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_HW_RANDOM is not set
-# CONFIG_RTC is not set
-# CONFIG_GEN_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
-# CONFIG_HWMON is not set
-# CONFIG_HWMON_VID is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
-# CONFIG_USB is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# LED devices
-#
-# CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# InfiniBand support
-#
-# CONFIG_INFINIBAND is not set
-
-#
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
-#
-
-#
-# Real Time Clock
-#
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# Auxiliary Display support
-#
-
-#
-# Virtualization
-#
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-CONFIG_FUSE_FS=m
-CONFIG_GENERIC_ACL=y
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-CONFIG_TMPFS_POSIX_ACL=y
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Kernel hacking
-#
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_CROSSCOMPILE=y
-CONFIG_CMDLINE=""
-CONFIG_SYS_SUPPORTS_KGDB=y
-
-#
-# Security options
-#
-CONFIG_KEYS=y
-CONFIG_KEYS_DEBUG_PROC_KEYS=y
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_BLKCIPHER=m
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_NULL=m
-CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=m
-CONFIG_CRYPTO_SHA1=m
-CONFIG_CRYPTO_SHA256=m
-CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_WP512=m
-CONFIG_CRYPTO_TGR192=m
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=m
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_DES=m
-CONFIG_CRYPTO_FCRYPT=m
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_AES=m
-CONFIG_CRYPTO_CAST5=m
-CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_ARC4=m
-CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_CRC32C=m
-CONFIG_CRYPTO_CAMELLIA=m
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=m
-# CONFIG_CRC_CCITT is not set
-CONFIG_CRC16=m
-CONFIG_CRC32=m
-CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=m
-CONFIG_ZLIB_DEFLATE=m
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
diff --git a/arch/mips/momentum/Kconfig b/arch/mips/momentum/Kconfig
deleted file mode 100644
index 70a61cf7174..00000000000
--- a/arch/mips/momentum/Kconfig
+++ /dev/null
@@ -1,6 +0,0 @@
-config JAGUAR_DMALOW
-	bool "Low DMA Mode"
-	depends on MOMENCO_JAGUAR_ATX
-	help
-	  Select to Y if jump JP5 is set on your board, N otherwise.  Normally
-	  the jumper is set, so if you feel unsafe, just say Y.
diff --git a/arch/mips/momentum/jaguar_atx/Makefile b/arch/mips/momentum/jaguar_atx/Makefile
deleted file mode 100644
index 2e8cebd49bc..00000000000
--- a/arch/mips/momentum/jaguar_atx/Makefile
+++ /dev/null
@@ -1,12 +0,0 @@
-#
-# Makefile for Momentum Computer's Jaguar-ATX board.
-#
-# Note! Dependencies are done automagically by 'make dep', which also
-# removes any old dependencies. DON'T put your own dependencies here
-# unless it's something special (ie not a .c file).
-#
-
-obj-y += irq.o platform.o prom.o reset.o setup.o
-
-obj-$(CONFIG_SERIAL_8250_CONSOLE) += ja-console.o
-obj-$(CONFIG_REMOTE_DEBUG) += dbg_io.o
diff --git a/arch/mips/momentum/jaguar_atx/dbg_io.c b/arch/mips/momentum/jaguar_atx/dbg_io.c
deleted file mode 100644
index b85a6521f72..00000000000
--- a/arch/mips/momentum/jaguar_atx/dbg_io.c
+++ /dev/null
@@ -1,125 +0,0 @@
-
-#if defined(CONFIG_REMOTE_DEBUG)
-
-#include <asm/serial.h> /* For the serial port location and base baud */
-
-/* --- CONFIG --- */
-
-typedef unsigned char uint8;
-typedef unsigned int uint32;
-
-/* --- END OF CONFIG --- */
-
-#define         UART16550_BAUD_2400             2400
-#define         UART16550_BAUD_4800             4800
-#define         UART16550_BAUD_9600             9600
-#define         UART16550_BAUD_19200            19200
-#define         UART16550_BAUD_38400            38400
-#define         UART16550_BAUD_57600            57600
-#define         UART16550_BAUD_115200           115200
-
-#define         UART16550_PARITY_NONE           0
-#define         UART16550_PARITY_ODD            0x08
-#define         UART16550_PARITY_EVEN           0x18
-#define         UART16550_PARITY_MARK           0x28
-#define         UART16550_PARITY_SPACE          0x38
-
-#define         UART16550_DATA_5BIT             0x0
-#define         UART16550_DATA_6BIT             0x1
-#define         UART16550_DATA_7BIT             0x2
-#define         UART16550_DATA_8BIT             0x3
-
-#define         UART16550_STOP_1BIT             0x0
-#define         UART16550_STOP_2BIT             0x4
-
-/* ----------------------------------------------------- */
-
-/* === CONFIG === */
-
-/* [jsun] we use the second serial port for kdb */
-#define         BASE                    OCELOT_SERIAL1_BASE
-#define         MAX_BAUD                OCELOT_BASE_BAUD
-
-/* === END OF CONFIG === */
-
-#define         REG_OFFSET              4
-
-/* register offset */
-#define         OFS_RCV_BUFFER          0
-#define         OFS_TRANS_HOLD          0
-#define         OFS_SEND_BUFFER         0
-#define         OFS_INTR_ENABLE         (1*REG_OFFSET)
-#define         OFS_INTR_ID             (2*REG_OFFSET)
-#define         OFS_DATA_FORMAT         (3*REG_OFFSET)
-#define         OFS_LINE_CONTROL        (3*REG_OFFSET)
-#define         OFS_MODEM_CONTROL       (4*REG_OFFSET)
-#define         OFS_RS232_OUTPUT        (4*REG_OFFSET)
-#define         OFS_LINE_STATUS         (5*REG_OFFSET)
-#define         OFS_MODEM_STATUS        (6*REG_OFFSET)
-#define         OFS_RS232_INPUT         (6*REG_OFFSET)
-#define         OFS_SCRATCH_PAD         (7*REG_OFFSET)
-
-#define         OFS_DIVISOR_LSB         (0*REG_OFFSET)
-#define         OFS_DIVISOR_MSB         (1*REG_OFFSET)
-
-
-/* memory-mapped read/write of the port */
-#define         UART16550_READ(y)    (*((volatile uint8*)(BASE + y)))
-#define         UART16550_WRITE(y, z)  ((*((volatile uint8*)(BASE + y))) = z)
-
-void debugInit(uint32 baud, uint8 data, uint8 parity, uint8 stop)
-{
-	/* disable interrupts */
-	UART16550_WRITE(OFS_INTR_ENABLE, 0);
-
-	/* set up baud rate */
-	{
-		uint32 divisor;
-
-		/* set DIAB bit */
-		UART16550_WRITE(OFS_LINE_CONTROL, 0x80);
-
-		/* set divisor */
-		divisor = MAX_BAUD / baud;
-		UART16550_WRITE(OFS_DIVISOR_LSB, divisor & 0xff);
-		UART16550_WRITE(OFS_DIVISOR_MSB, (divisor & 0xff00) >> 8);
-
-		/* clear DIAB bit */
-		UART16550_WRITE(OFS_LINE_CONTROL, 0x0);
-	}
-
-	/* set data format */
-	UART16550_WRITE(OFS_DATA_FORMAT, data | parity | stop);
-}
-
-static int remoteDebugInitialized = 0;
-
-uint8 getDebugChar(void)
-{
-	if (!remoteDebugInitialized) {
-		remoteDebugInitialized = 1;
-		debugInit(UART16550_BAUD_38400,
-			  UART16550_DATA_8BIT,
-			  UART16550_PARITY_NONE, UART16550_STOP_1BIT);
-	}
-
-	while ((UART16550_READ(OFS_LINE_STATUS) & 0x1) == 0);
-	return UART16550_READ(OFS_RCV_BUFFER);
-}
-
-
-int putDebugChar(uint8 byte)
-{
-	if (!remoteDebugInitialized) {
-		remoteDebugInitialized = 1;
-		debugInit(UART16550_BAUD_38400,
-			  UART16550_DATA_8BIT,
-			  UART16550_PARITY_NONE, UART16550_STOP_1BIT);
-	}
-
-	while ((UART16550_READ(OFS_LINE_STATUS) & 0x20) == 0);
-	UART16550_WRITE(OFS_SEND_BUFFER, byte);
-	return 1;
-}
-
-#endif
diff --git a/arch/mips/momentum/jaguar_atx/irq.c b/arch/mips/momentum/jaguar_atx/irq.c
deleted file mode 100644
index f2b432585df..00000000000
--- a/arch/mips/momentum/jaguar_atx/irq.c
+++ /dev/null
@@ -1,94 +0,0 @@
-/*
- * Copyright (C) 2002 Momentum Computer, Inc.
- * Author: Matthew Dharm, mdharm@momenco.com
- *
- * Based on work by:
- *   Copyright (C) 2000 RidgeRun, Inc.
- *   Author: RidgeRun, Inc.
- *   glonnon@ridgerun.com, skranz@ridgerun.com, stevej@ridgerun.com
- *
- *   Copyright 2001 MontaVista Software Inc.
- *   Author: Jun Sun, jsun@mvista.com or jsun@junsun.net
- *
- *   Copyright (C) 2000, 01, 06 Ralf Baechle (ralf@linux-mips.org)
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
- *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
- *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- */
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/signal.h>
-#include <linux/types.h>
-#include <asm/irq_cpu.h>
-#include <asm/mipsregs.h>
-#include <asm/time.h>
-
-asmlinkage void plat_irq_dispatch(void)
-{
-	unsigned int pending = read_c0_cause() & read_c0_status();
-
-	if (pending & STATUSF_IP0)
-		do_IRQ(0);
-	else if (pending & STATUSF_IP1)
-		do_IRQ(1);
-	else if (pending & STATUSF_IP2)
-		do_IRQ(2);
-	else if (pending & STATUSF_IP3)
-		do_IRQ(3);
-	else if (pending & STATUSF_IP4)
-		do_IRQ(4);
-	else if (pending & STATUSF_IP5)
-		do_IRQ(5);
-	else if (pending & STATUSF_IP6)
-		do_IRQ(6);
-	else if (pending & STATUSF_IP7)
-		ll_timer_interrupt(7);
-	else {
-		/*
-		 * Now look at the extended interrupts
-		 */
-		pending = (read_c0_cause() & (read_c0_intcontrol() << 8)) >> 16;
-		if (pending & STATUSF_IP8)
-			ll_mv64340_irq();
-	}
-}
-
-static struct irqaction cascade_mv64340 = {
-	no_action, IRQF_DISABLED, CPU_MASK_NONE, "MV64340-Cascade", NULL, NULL
-};
-
-void __init arch_init_irq(void)
-{
-	/*
-	 * Clear all of the interrupts while we change the able around a bit.
-	 * int-handler is not on bootstrap
-	 */
-	clear_c0_status(ST0_IM);
-
-	mips_cpu_irq_init();
-	rm7k_cpu_irq_init();
-
-	/* set up the cascading interrupts */
-	setup_irq(8, &cascade_mv64340);
-
-	mv64340_irq_init(16);
-
-	set_c0_status(ST0_IM);
-}
diff --git a/arch/mips/momentum/jaguar_atx/ja-console.c b/arch/mips/momentum/jaguar_atx/ja-console.c
deleted file mode 100644
index 2c30b4f5624..00000000000
--- a/arch/mips/momentum/jaguar_atx/ja-console.c
+++ /dev/null
@@ -1,101 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2001, 2002, 2004 Ralf Baechle
- */
-#include <linux/init.h>
-#include <linux/console.h>
-#include <linux/kdev_t.h>
-#include <linux/major.h>
-#include <linux/termios.h>
-#include <linux/sched.h>
-#include <linux/tty.h>
-
-#include <linux/serial.h>
-#include <linux/serial_core.h>
-#include <asm/serial.h>
-
-/* SUPERIO uart register map */
-struct ja_uartregs {
-	union {
-		volatile u8	pad0[3];
-		volatile u8	rbr;	/* read only, DLAB == 0 */
-		volatile u8	pad1[3];
-		volatile u8	thr;	/* write only, DLAB == 0 */
-		volatile u8	pad2[3];
-		volatile u8	dll;	/* DLAB == 1 */
-	} u1;
-	union {
-		volatile u8	pad0[3];
-		volatile u8	ier;	/* DLAB == 0 */
-		volatile u8	pad1[3];
-		volatile u8	dlm;	/* DLAB == 1 */
-	} u2;
-	union {
-		volatile u8	pad0[3];
-		volatile u8	iir;	/* read only */
-		volatile u8	pad1[3];
-		volatile u8	fcr;	/* write only */
-	} u3;
-	volatile u8	pad0[3];
-	volatile u8	iu_lcr;
-	volatile u8	pad1[3];
-	volatile u8	iu_mcr;
-	volatile u8	pad2[3];
-	volatile u8	iu_lsr;
-	volatile u8	pad3[3];
-	volatile u8	iu_msr;
-	volatile u8	pad4[3];
-	volatile u8	iu_scr;
-} ja_uregs_t;
-
-#define iu_rbr u1.rbr
-#define iu_thr u1.thr
-#define iu_dll u1.dll
-#define iu_ier u2.ier
-#define iu_dlm u2.dlm
-#define iu_iir u3.iir
-#define iu_fcr u3.fcr
-
-extern unsigned long uart_base;
-
-static inline struct ja_uartregs *console_uart(void)
-{
-	return (struct ja_uartregs *) (uart_base + 0x23UL);
-}
-
-void prom_putchar(char c)
-{
-	struct ja_uartregs *uart = console_uart();
-
-	while ((uart->iu_lsr & 0x20) == 0);
-	uart->iu_thr = c;
-}
-
-static void inline ja_console_probe(void)
-{
-	struct uart_port up;
-
-	/*
-	 * Register to interrupt zero because we share the interrupt with
-	 * the serial driver which we don't properly support yet.
-	 */
-	memset(&up, 0, sizeof(up));
-	up.membase	= (unsigned char *) uart_base + 0x23UL;
-	up.irq		= JAGUAR_ATX_SERIAL1_IRQ;
-	up.uartclk	= JAGUAR_ATX_UART_CLK;
-	up.regshift	= 2;
-	up.iotype	= UPIO_MEM;
-	up.flags	= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST;
-	up.line		= 0;
-
-	if (early_serial_setup(&up))
-		printk(KERN_ERR "Early serial init of port 0 failed\n");
-}
-
-__init void ja_setup_console(void)
-{
-	ja_console_probe();
-}
diff --git a/arch/mips/momentum/jaguar_atx/jaguar_atx_fpga.h b/arch/mips/momentum/jaguar_atx/jaguar_atx_fpga.h
deleted file mode 100644
index 022f6974b76..00000000000
--- a/arch/mips/momentum/jaguar_atx/jaguar_atx_fpga.h
+++ /dev/null
@@ -1,54 +0,0 @@
-/*
- * Jaguar-ATX Board Register Definitions
- *
- * (C) 2002 Momentum Computer Inc.
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
- *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
- *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- */
-#ifndef __JAGUAR_ATX_FPGA_H__
-#define __JAGUAR_ATX_FPGA_H__
-
-#define JAGUAR_ATX_REG_BOARDREV		0x0
-#define JAGUAR_ATX_REG_FPGA_REV		0x1
-#define JAGUAR_ATX_REG_FPGA_TYPE	0x2
-#define JAGUAR_ATX_REG_RESET_STATUS	0x3
-#define JAGUAR_ATX_REG_BOARD_STATUS	0x4
-#define JAGUAR_ATX_REG_RESERVED1	0x5
-#define JAGUAR_ATX_REG_SET		0x6
-#define JAGUAR_ATX_REG_CLR		0x7
-#define JAGUAR_ATX_REG_EEPROM_MODE	0x9
-#define JAGUAR_ATX_REG_RESERVED2	0xa
-#define JAGUAR_ATX_REG_RESERVED3	0xb
-#define JAGUAR_ATX_REG_RESERVED4	0xc
-#define JAGUAR_ATX_REG_PHY_INTSTAT	0xd
-#define JAGUAR_ATX_REG_RESERVED5	0xe
-#define JAGUAR_ATX_REG_RESERVED6	0xf
-
-#define JAGUAR_ATX_CS0_ADDR		0xfc000000L
-
-extern unsigned long ja_fpga_base;
-
-#define __FPGA_REG_TO_ADDR(reg)						\
-	((void *) ja_fpga_base + JAGUAR_ATX_REG_##reg)
-#define JAGUAR_FPGA_WRITE(x, reg) writeb(x, __FPGA_REG_TO_ADDR(reg))
-#define JAGUAR_FPGA_READ(reg) readb(__FPGA_REG_TO_ADDR(reg))
-
-#endif
diff --git a/arch/mips/momentum/jaguar_atx/platform.c b/arch/mips/momentum/jaguar_atx/platform.c
deleted file mode 100644
index 561844878a9..00000000000
--- a/arch/mips/momentum/jaguar_atx/platform.c
+++ /dev/null
@@ -1,208 +0,0 @@
-#include <linux/delay.h>
-#include <linux/if_ether.h>
-#include <linux/ioport.h>
-#include <linux/mv643xx.h>
-#include <linux/platform_device.h>
-
-#include "jaguar_atx_fpga.h"
-
-#if defined(CONFIG_MV643XX_ETH) || defined(CONFIG_MV643XX_ETH_MODULE)
-
-static struct resource mv643xx_eth_shared_resources[] = {
-	[0] = {
-		.name   = "ethernet shared base",
-		.start  = 0xf1000000 + MV643XX_ETH_SHARED_REGS,
-		.end    = 0xf1000000 + MV643XX_ETH_SHARED_REGS +
-		                       MV643XX_ETH_SHARED_REGS_SIZE - 1,
-		.flags  = IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device mv643xx_eth_shared_device = {
-	.name		= MV643XX_ETH_SHARED_NAME,
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(mv643xx_eth_shared_resources),
-	.resource	= mv643xx_eth_shared_resources,
-};
-
-#define MV_SRAM_BASE			0xfe000000UL
-#define MV_SRAM_SIZE			(256 * 1024)
-
-#define MV_SRAM_RXRING_SIZE		(MV_SRAM_SIZE / 4)
-#define MV_SRAM_TXRING_SIZE		(MV_SRAM_SIZE / 4)
-
-#define MV_SRAM_BASE_ETH0		MV_SRAM_BASE
-#define MV_SRAM_BASE_ETH1		(MV_SRAM_BASE + (MV_SRAM_SIZE / 2))
-
-#define MV64x60_IRQ_ETH_0 48
-#define MV64x60_IRQ_ETH_1 49
-#define MV64x60_IRQ_ETH_2 50
-
-static struct resource mv64x60_eth0_resources[] = {
-	[0] = {
-		.name	= "eth0 irq",
-		.start	= MV64x60_IRQ_ETH_0,
-		.end	= MV64x60_IRQ_ETH_0,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct mv643xx_eth_platform_data eth0_pd = {
-	.port_number	= 0,
-
-	.tx_sram_addr	= MV_SRAM_BASE_ETH0,
-	.tx_sram_size	= MV_SRAM_TXRING_SIZE,
-	.tx_queue_size	= MV_SRAM_TXRING_SIZE / 16,
-
-	.rx_sram_addr	= MV_SRAM_BASE_ETH0 + MV_SRAM_TXRING_SIZE,
-	.rx_sram_size	= MV_SRAM_RXRING_SIZE,
-	.rx_queue_size	= MV_SRAM_RXRING_SIZE / 16,
-};
-
-static struct platform_device eth0_device = {
-	.name		= MV643XX_ETH_NAME,
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(mv64x60_eth0_resources),
-	.resource	= mv64x60_eth0_resources,
-	.dev = {
-		.platform_data = &eth0_pd,
-	},
-};
-
-static struct resource mv64x60_eth1_resources[] = {
-	[0] = {
-		.name	= "eth1 irq",
-		.start	= MV64x60_IRQ_ETH_1,
-		.end	= MV64x60_IRQ_ETH_1,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct mv643xx_eth_platform_data eth1_pd = {
-	.port_number	= 1,
-
-	.tx_sram_addr	= MV_SRAM_BASE_ETH1,
-	.tx_sram_size	= MV_SRAM_TXRING_SIZE,
-	.tx_queue_size	= MV_SRAM_TXRING_SIZE / 16,
-
-	.rx_sram_addr	= MV_SRAM_BASE_ETH1 + MV_SRAM_TXRING_SIZE,
-	.rx_sram_size	= MV_SRAM_RXRING_SIZE,
-	.rx_queue_size	= MV_SRAM_RXRING_SIZE / 16,
-};
-
-static struct platform_device eth1_device = {
-	.name		= MV643XX_ETH_NAME,
-	.id		= 1,
-	.num_resources	= ARRAY_SIZE(mv64x60_eth1_resources),
-	.resource	= mv64x60_eth1_resources,
-	.dev = {
-		.platform_data = &eth1_pd,
-	},
-};
-
-static struct resource mv64x60_eth2_resources[] = {
-	[0] = {
-		.name	= "eth2 irq",
-		.start	= MV64x60_IRQ_ETH_2,
-		.end	= MV64x60_IRQ_ETH_2,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct mv643xx_eth_platform_data eth2_pd = {
-	.port_number	= 2,
-};
-
-static struct platform_device eth2_device = {
-	.name		= MV643XX_ETH_NAME,
-	.id		= 2,
-	.num_resources	= ARRAY_SIZE(mv64x60_eth2_resources),
-	.resource	= mv64x60_eth2_resources,
-	.dev = {
-		.platform_data = &eth2_pd,
-	},
-};
-
-static struct platform_device *mv643xx_eth_pd_devs[] __initdata = {
-	&mv643xx_eth_shared_device,
-	&eth0_device,
-	&eth1_device,
-	&eth2_device,
-};
-
-static u8 __init exchange_bit(u8 val, u8 cs)
-{
-	/* place the data */
-	JAGUAR_FPGA_WRITE((val << 2) | cs, EEPROM_MODE);
-	udelay(1);
-
-	/* turn the clock on */
-	JAGUAR_FPGA_WRITE((val << 2) | cs | 0x2, EEPROM_MODE);
-	udelay(1);
-
-	/* turn the clock off and read-strobe */
-	JAGUAR_FPGA_WRITE((val << 2) | cs | 0x10, EEPROM_MODE);
-
-	/* return the data */
-	return (JAGUAR_FPGA_READ(EEPROM_MODE) >> 3) & 0x1;
-}
-
-static void __init get_mac(char dest[6])
-{
-	u8 read_opcode[12] = {1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0};
-	int i,j;
-
-	for (i = 0; i < 12; i++)
-		exchange_bit(read_opcode[i], 1);
-
-	for (j = 0; j < 6; j++) {
-		dest[j] = 0;
-		for (i = 0; i < 8; i++) {
-			dest[j] <<= 1;
-			dest[j] |= exchange_bit(0, 1);
-		}
-	}
-
-	/* turn off CS */
-	exchange_bit(0,0);
-}
-
-/*
- * Copy and increment ethernet MAC address by a small value.
- *
- * This is useful for systems where the only one MAC address is stored in
- * non-volatile memory for multiple ports.
- */
-static inline void eth_mac_add(unsigned char *dst, unsigned char *src,
-	unsigned int add)
-{
-	int i;
-
-	BUG_ON(add >= 256);
-
-	for (i = ETH_ALEN; i >= 0; i--) {
-		dst[i] = src[i] + add;
-		add = dst[i] < src[i];		/* compute carry */
-	}
-
-	WARN_ON(add);
-}
-
-static int __init mv643xx_eth_add_pds(void)
-{
-	unsigned char mac[ETH_ALEN];
-	int ret;
-
-	get_mac(mac);
-	eth_mac_add(eth0_pd.mac_addr, mac, 0);
-	eth_mac_add(eth1_pd.mac_addr, mac, 1);
-	eth_mac_add(eth2_pd.mac_addr, mac, 2);
-	ret = platform_add_devices(mv643xx_eth_pd_devs,
-			ARRAY_SIZE(mv643xx_eth_pd_devs));
-
-	return ret;
-}
-
-device_initcall(mv643xx_eth_add_pds);
-
-#endif /* defined(CONFIG_MV643XX_ETH) || defined(CONFIG_MV643XX_ETH_MODULE) */
diff --git a/arch/mips/momentum/jaguar_atx/prom.c b/arch/mips/momentum/jaguar_atx/prom.c
deleted file mode 100644
index 5dd154ee58f..00000000000
--- a/arch/mips/momentum/jaguar_atx/prom.c
+++ /dev/null
@@ -1,210 +0,0 @@
-/*
- * Copyright 2002 Momentum Computer Inc.
- * Author: Matthew Dharm <mdharm@momenco.com>
- *
- * Louis Hamilton, Red Hat, Inc.
- * hamilton@redhat.com  [MIPS64 modifications]
- *
- * Based on Ocelot Linux port, which is
- * Copyright 2001 MontaVista Software Inc.
- * Author: jsun@mvista.com or jsun@junsun.net
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
- * Added changes for SMP - Manish Lachwani (lachwani@pmc-sierra.com)
- */
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/sched.h>
-#include <linux/bootmem.h>
-#include <linux/mv643xx.h>
-
-#include <asm/addrspace.h>
-#include <asm/bootinfo.h>
-#include <asm/pmon.h>
-
-#include "jaguar_atx_fpga.h"
-
-extern void ja_setup_console(void);
-
-struct callvectors *debug_vectors;
-
-extern unsigned long cpu_clock;
-
-const char *get_system_type(void)
-{
-	return "Momentum Jaguar-ATX";
-}
-
-#ifdef CONFIG_64BIT
-
-unsigned long signext(unsigned long addr)
-{
-	addr &= 0xffffffff;
-	return (unsigned long)((int)addr);
-}
-
-void *get_arg(unsigned long args, int arc)
-{
-	unsigned long ul;
-	unsigned char *puc, uc;
-
-	args += (arc * 4);
-	ul = (unsigned long)signext(args);
-	puc = (unsigned char *)ul;
-	if (puc == 0)
-		return (void *)0;
-
-#ifdef CONFIG_CPU_LITTLE_ENDIAN
-	uc = *puc++;
-	l = (unsigned long)uc;
-	uc = *puc++;
-	ul |= (((unsigned long)uc) << 8);
-	uc = *puc++;
-	ul |= (((unsigned long)uc) << 16);
-	uc = *puc++;
-	ul |= (((unsigned long)uc) << 24);
-#else
-	uc = *puc++;
-	ul = ((unsigned long)uc) << 24;
-	uc = *puc++;
-	ul |= (((unsigned long)uc) << 16);
-	uc = *puc++;
-	ul |= (((unsigned long)uc) << 8);
-	uc = *puc++;
-	ul |= ((unsigned long)uc);
-#endif
-	ul = signext(ul);
-
-	return (void *)ul;
-}
-
-char *arg64(unsigned long addrin, int arg_index)
-{
-	unsigned long args;
-	char *p;
-
-	args = signext(addrin);
-	p = (char *)get_arg(args, arg_index);
-
-	return p;
-}
-#endif  /* CONFIG_64BIT */
-
-/* PMON passes arguments in C main() style */
-void __init prom_init(void)
-{
-	int argc = fw_arg0;
-	char **arg = (char **) fw_arg1;
-	char **env = (char **) fw_arg2;
-	struct callvectors *cv = (struct callvectors *) fw_arg3;
-	int i;
-
-#ifdef CONFIG_SERIAL_8250_CONSOLE
-//	ja_setup_console();	/* The very first thing.  */
-#endif
-
-#ifdef CONFIG_64BIT
-	char *ptr;
-
-	printk("Mips64 Jaguar-ATX\n");
-	/* save the PROM vectors for debugging use */
-	debug_vectors = (struct callvectors *)signext((unsigned long)cv);
-
-	/* arg[0] is "g", the rest is boot parameters */
-	arcs_cmdline[0] = '\0';
-
-	for (i = 1; i < argc; i++) {
-		ptr = (char *)arg64((unsigned long)arg, i);
-		if ((strlen(arcs_cmdline) + strlen(ptr) + 1) >=
-		    sizeof(arcs_cmdline))
-			break;
-		strcat(arcs_cmdline, ptr);
-		strcat(arcs_cmdline, " ");
-	}
-
-	i = 0;
-	while (1) {
-		ptr = (char *)arg64((unsigned long)env, i);
-		if (! ptr)
-			break;
-
-		if (strncmp("gtbase", ptr, strlen("gtbase")) == 0) {
-			marvell_base = simple_strtol(ptr + strlen("gtbase="),
-							NULL, 16);
-
-			if ((marvell_base & 0xffffffff00000000) == 0)
-				marvell_base |= 0xffffffff00000000;
-
-			printk("marvell_base set to 0x%016lx\n", marvell_base);
-		}
-		if (strncmp("cpuclock", ptr, strlen("cpuclock")) == 0) {
-			cpu_clock = simple_strtol(ptr + strlen("cpuclock="),
-							NULL, 10);
-			printk("cpu_clock set to %d\n", cpu_clock);
-		}
-		i++;
-	}
-	printk("arcs_cmdline: %s\n", arcs_cmdline);
-
-#else   /* CONFIG_64BIT */
-	/* save the PROM vectors for debugging use */
-	debug_vectors = cv;
-
-	/* arg[0] is "g", the rest is boot parameters */
-	arcs_cmdline[0] = '\0';
-	for (i = 1; i < argc; i++) {
-		if (strlen(arcs_cmdline) + strlen(arg[i] + 1)
-		    >= sizeof(arcs_cmdline))
-			break;
-		strcat(arcs_cmdline, arg[i]);
-		strcat(arcs_cmdline, " ");
-	}
-
-	while (*env) {
-		if (strncmp("gtbase", *env, strlen("gtbase")) == 0) {
-			marvell_base = simple_strtol(*env + strlen("gtbase="),
-							NULL, 16);
-		}
-		if (strncmp("cpuclock", *env, strlen("cpuclock")) == 0) {
-			cpu_clock = simple_strtol(*env + strlen("cpuclock="),
-							NULL, 10);
-		}
-		env++;
-	}
-#endif /* CONFIG_64BIT */
-	mips_machgroup = MACH_GROUP_MOMENCO;
-	mips_machtype = MACH_MOMENCO_JAGUAR_ATX;
-}
-
-void __init prom_free_prom_memory(void)
-{
-}
-
-void __init prom_fixup_mem_map(unsigned long start, unsigned long end)
-{
-}
-
-int prom_boot_secondary(int cpu, unsigned long sp, unsigned long gp)
-{
-	/* Clear the semaphore */
-	*(volatile uint32_t *)(0xbb000a68) = 0x80000000;
-
-	return 1;
-}
-
-void prom_init_secondary(void)
-{
-        clear_c0_config(CONF_CM_CMASK);
-        set_c0_config(0x2);
-
-	clear_c0_status(ST0_IM);
-	set_c0_status(0x1ffff);
-}
-
-void prom_smp_finish(void)
-{
-}
diff --git a/arch/mips/momentum/jaguar_atx/reset.c b/arch/mips/momentum/jaguar_atx/reset.c
deleted file mode 100644
index c73b0897dc5..00000000000
--- a/arch/mips/momentum/jaguar_atx/reset.c
+++ /dev/null
@@ -1,56 +0,0 @@
-/*
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
- * Copyright (C) 1997, 2001 Ralf Baechle
- * Copyright 2001 MontaVista Software Inc.
- * Author: jsun@mvista.com or jsun@junsun.net
- *
- * Copyright (C) 2002 Momentum Computer Inc.
- * Author: Matthew Dharm <mdharm@momenco.com>
- *
- * Louis Hamilton, Red Hat, Inc.
- * hamilton@redhat.com  [MIPS64 modifications]
- */
-#include <linux/sched.h>
-#include <linux/mm.h>
-#include <asm/io.h>
-#include <asm/pgtable.h>
-#include <asm/processor.h>
-#include <asm/reboot.h>
-#include <asm/system.h>
-#include <linux/delay.h>
-
-void momenco_jaguar_restart(char *command)
-{
-	/* base address of timekeeper portion of part */
-#ifdef CONFIG_64BIT
-	void *nvram = (void*) 0xfffffffffc807000;
-#else
-	void *nvram = (void*) 0xfc807000;
-#endif
-	/* Ask the NVRAM/RTC/watchdog chip to assert reset in 1/16 second */
-	writeb(0x84, nvram + 0xff7);
-
-	/* wait for the watchdog to go off */
-	mdelay(100+(1000/16));
-
-	/* if the watchdog fails for some reason, let people know */
-	printk(KERN_NOTICE "Watchdog reset failed\n");
-}
-
-void momenco_jaguar_halt(void)
-{
-	printk(KERN_NOTICE "\n** You can safely turn off the power\n");
-	while (1)
-		__asm__(".set\tmips3\n\t"
-	                "wait\n\t"
-			".set\tmips0");
-}
-
-void momenco_jaguar_power_off(void)
-{
-	momenco_jaguar_halt();
-}
diff --git a/arch/mips/momentum/jaguar_atx/setup.c b/arch/mips/momentum/jaguar_atx/setup.c
deleted file mode 100644
index 5a510142b97..00000000000
--- a/arch/mips/momentum/jaguar_atx/setup.c
+++ /dev/null
@@ -1,475 +0,0 @@
-/*
- * BRIEF MODULE DESCRIPTION
- * Momentum Computer Jaguar-ATX board dependent boot routines
- *
- * Copyright (C) 1996, 1997, 2001, 04, 06  Ralf Baechle (ralf@linux-mips.org)
- * Copyright (C) 2000 RidgeRun, Inc.
- * Copyright (C) 2001 Red Hat, Inc.
- * Copyright (C) 2002 Momentum Computer
- *
- * Author: Matthew Dharm, Momentum Computer
- *   mdharm@momenco.com
- *
- * Louis Hamilton, Red Hat, Inc.
- *   hamilton@redhat.com  [MIPS64 modifications]
- *
- * Author: RidgeRun, Inc.
- *   glonnon@ridgerun.com, skranz@ridgerun.com, stevej@ridgerun.com
- *
- * Copyright 2001 MontaVista Software Inc.
- * Author: jsun@mvista.com or jsun@junsun.net
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
- *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
- *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- */
-#include <linux/bcd.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/mm.h>
-#include <linux/bootmem.h>
-#include <linux/module.h>
-#include <linux/pci.h>
-#include <linux/swap.h>
-#include <linux/ioport.h>
-#include <linux/pm.h>
-#include <linux/sched.h>
-#include <linux/interrupt.h>
-#include <linux/timex.h>
-#include <linux/vmalloc.h>
-#include <linux/mv643xx.h>
-
-#include <asm/time.h>
-#include <asm/bootinfo.h>
-#include <asm/page.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/processor.h>
-#include <asm/reboot.h>
-#include <asm/tlbflush.h>
-
-#include "jaguar_atx_fpga.h"
-
-extern unsigned long mv64340_sram_base;
-unsigned long cpu_clock;
-
-/* These functions are used for rebooting or halting the machine*/
-extern void momenco_jaguar_restart(char *command);
-extern void momenco_jaguar_halt(void);
-extern void momenco_jaguar_power_off(void);
-
-void momenco_time_init(void);
-
-static char reset_reason;
-
-static inline unsigned long ENTRYLO(unsigned long paddr)
-{
-	return ((paddr & PAGE_MASK) |
-	       (_PAGE_PRESENT | __READABLE | __WRITEABLE | _PAGE_GLOBAL |
-		_CACHE_UNCACHED)) >> 6;
-}
-
-void __init bus_error_init(void) { /* nothing */ }
-
-/*
- * Load a few TLB entries for the MV64340 and perhiperals. The MV64340 is going
- * to be hit on every IRQ anyway - there's absolutely no point in letting it be
- * a random TLB entry, as it'll just cause needless churning of the TLB. And we
- * use the other half for the serial port, which is just a PITA otherwise :)
- *
- *	Device			Physical	Virtual
- *	MV64340 Internal Regs	0xf4000000	0xf4000000
- *	Ocelot-C[S] PLD (CS0)	0xfc000000	0xfc000000
- *	NVRAM (CS1)		0xfc800000	0xfc800000
- *	UARTs (CS2)		0xfd000000	0xfd000000
- *	Internal SRAM		0xfe000000	0xfe000000
- *	M-Systems DOC (CS3)	0xff000000	0xff000000
- */
-
-static __init void wire_stupidity_into_tlb(void)
-{
-#ifdef CONFIG_32BIT
-	write_c0_wired(0);
-	local_flush_tlb_all();
-
-	/* marvell and extra space */
-	add_wired_entry(ENTRYLO(0xf4000000), ENTRYLO(0xf4010000),
-	                0xf4000000UL, PM_64K);
-	/* fpga, rtc, and uart */
-	add_wired_entry(ENTRYLO(0xfc000000), ENTRYLO(0xfd000000),
-	                0xfc000000UL, PM_16M);
-//	/* m-sys and internal SRAM */
-//	add_wired_entry(ENTRYLO(0xfe000000), ENTRYLO(0xff000000),
-//	                0xfe000000UL, PM_16M);
-
-	marvell_base = 0xf4000000;
-	//mv64340_sram_base = 0xfe000000;	/* Currently unused */
-#endif
-}
-
-unsigned long marvell_base	= 0xf4000000L;
-unsigned long ja_fpga_base	= JAGUAR_ATX_CS0_ADDR;
-unsigned long uart_base		= 0xfd000000L;
-static unsigned char *rtc_base	= (unsigned char*) 0xfc800000L;
-
-EXPORT_SYMBOL(marvell_base);
-
-static __init int per_cpu_mappings(void)
-{
-	marvell_base	= (unsigned long) ioremap(0xf4000000, 0x10000);
-	ja_fpga_base	= (unsigned long) ioremap(JAGUAR_ATX_CS0_ADDR,  0x1000);
-	uart_base	= (unsigned long) ioremap(0xfd000000UL, 0x1000);
-	rtc_base	= ioremap(0xfc000000UL, 0x8000);
-	// ioremap(0xfe000000,  32 << 20);
-	write_c0_wired(0);
-	local_flush_tlb_all();
-	ja_setup_console();
-
-	return 0;
-}
-arch_initcall(per_cpu_mappings);
-
-unsigned long m48t37y_get_time(void)
-{
-	unsigned int year, month, day, hour, min, sec;
-	unsigned long flags;
-
-	spin_lock_irqsave(&rtc_lock, flags);
-	/* stop the update */
-	rtc_base[0x7ff8] = 0x40;
-
-	year = BCD2BIN(rtc_base[0x7fff]);
-	year += BCD2BIN(rtc_base[0x7ff1]) * 100;
-
-	month = BCD2BIN(rtc_base[0x7ffe]);
-
-	day = BCD2BIN(rtc_base[0x7ffd]);
-
-	hour = BCD2BIN(rtc_base[0x7ffb]);
-	min = BCD2BIN(rtc_base[0x7ffa]);
-	sec = BCD2BIN(rtc_base[0x7ff9]);
-
-	/* start the update */
-	rtc_base[0x7ff8] = 0x00;
-	spin_unlock_irqrestore(&rtc_lock, flags);
-
-	return mktime(year, month, day, hour, min, sec);
-}
-
-int m48t37y_set_time(unsigned long sec)
-{
-	struct rtc_time tm;
-	unsigned long flags;
-
-	/* convert to a more useful format -- note months count from 0 */
-	to_tm(sec, &tm);
-	tm.tm_mon += 1;
-
-	spin_lock_irqsave(&rtc_lock, flags);
-	/* enable writing */
-	rtc_base[0x7ff8] = 0x80;
-
-	/* year */
-	rtc_base[0x7fff] = BIN2BCD(tm.tm_year % 100);
-	rtc_base[0x7ff1] = BIN2BCD(tm.tm_year / 100);
-
-	/* month */
-	rtc_base[0x7ffe] = BIN2BCD(tm.tm_mon);
-
-	/* day */
-	rtc_base[0x7ffd] = BIN2BCD(tm.tm_mday);
-
-	/* hour/min/sec */
-	rtc_base[0x7ffb] = BIN2BCD(tm.tm_hour);
-	rtc_base[0x7ffa] = BIN2BCD(tm.tm_min);
-	rtc_base[0x7ff9] = BIN2BCD(tm.tm_sec);
-
-	/* day of week -- not really used, but let's keep it up-to-date */
-	rtc_base[0x7ffc] = BIN2BCD(tm.tm_wday + 1);
-
-	/* disable writing */
-	rtc_base[0x7ff8] = 0x00;
-	spin_unlock_irqrestore(&rtc_lock, flags);
-
-	return 0;
-}
-
-void __init plat_timer_setup(struct irqaction *irq)
-{
-	setup_irq(8, irq);
-}
-
-/*
- * Ugly but the least of all evils.  TLB initialization did flush the TLB so
- * We need to setup mappings again before we can touch the RTC.
- */
-void momenco_time_init(void)
-{
-	wire_stupidity_into_tlb();
-
-	mips_hpt_frequency = cpu_clock / 2;
-
-	rtc_mips_get_time = m48t37y_get_time;
-	rtc_mips_set_time = m48t37y_set_time;
-}
-
-static struct resource mv_pci_io_mem0_resource = {
-	.name	= "MV64340 PCI0 IO MEM",
-	.flags	= IORESOURCE_IO
-};
-
-static struct resource mv_pci_mem0_resource = {
-	.name	= "MV64340 PCI0 MEM",
-	.flags	= IORESOURCE_MEM
-};
-
-static struct mv_pci_controller mv_bus0_controller = {
-	.pcic = {
-		.pci_ops	= &mv_pci_ops,
-		.mem_resource	= &mv_pci_mem0_resource,
-		.io_resource	= &mv_pci_io_mem0_resource,
-	},
-	.config_addr	= MV64340_PCI_0_CONFIG_ADDR,
-	.config_vreg	= MV64340_PCI_0_CONFIG_DATA_VIRTUAL_REG,
-};
-
-static uint32_t mv_io_base, mv_io_size;
-
-static void ja_pci0_init(void)
-{
-	uint32_t mem0_base, mem0_size;
-	uint32_t io_base, io_size;
-
-	io_base = MV_READ(MV64340_PCI_0_IO_BASE_ADDR) << 16;
-	io_size = (MV_READ(MV64340_PCI_0_IO_SIZE) + 1) << 16;
-	mem0_base = MV_READ(MV64340_PCI_0_MEMORY0_BASE_ADDR) << 16;
-	mem0_size = (MV_READ(MV64340_PCI_0_MEMORY0_SIZE) + 1) << 16;
-
-	mv_pci_io_mem0_resource.start		= 0;
-	mv_pci_io_mem0_resource.end		= io_size - 1;
-	mv_pci_mem0_resource.start		= mem0_base;
-	mv_pci_mem0_resource.end		= mem0_base + mem0_size - 1;
-	mv_bus0_controller.pcic.mem_offset	= mem0_base;
-	mv_bus0_controller.pcic.io_offset	= 0;
-
-	ioport_resource.end		= io_size - 1;
-
-	register_pci_controller(&mv_bus0_controller.pcic);
-
-	mv_io_base = io_base;
-	mv_io_size = io_size;
-}
-
-static struct resource mv_pci_io_mem1_resource = {
-	.name	= "MV64340 PCI1 IO MEM",
-	.flags	= IORESOURCE_IO
-};
-
-static struct resource mv_pci_mem1_resource = {
-	.name	= "MV64340 PCI1 MEM",
-	.flags	= IORESOURCE_MEM
-};
-
-static struct mv_pci_controller mv_bus1_controller = {
-	.pcic = {
-		.pci_ops	= &mv_pci_ops,
-		.mem_resource	= &mv_pci_mem1_resource,
-		.io_resource	= &mv_pci_io_mem1_resource,
-	},
-	.config_addr	= MV64340_PCI_1_CONFIG_ADDR,
-	.config_vreg	= MV64340_PCI_1_CONFIG_DATA_VIRTUAL_REG,
-};
-
-static __init void ja_pci1_init(void)
-{
-	uint32_t mem0_base, mem0_size;
-	uint32_t io_base, io_size;
-
-	io_base = MV_READ(MV64340_PCI_1_IO_BASE_ADDR) << 16;
-	io_size = (MV_READ(MV64340_PCI_1_IO_SIZE) + 1) << 16;
-	mem0_base = MV_READ(MV64340_PCI_1_MEMORY0_BASE_ADDR) << 16;
-	mem0_size = (MV_READ(MV64340_PCI_1_MEMORY0_SIZE) + 1) << 16;
-
-	/*
-	 * Here we assume the I/O window of second bus to be contiguous with
-	 * the first.  A gap is no problem but would waste address space for
-	 * remapping the port space.
-	 */
-	mv_pci_io_mem1_resource.start		= mv_io_size;
-	mv_pci_io_mem1_resource.end		= mv_io_size + io_size - 1;
-	mv_pci_mem1_resource.start		= mem0_base;
-	mv_pci_mem1_resource.end		= mem0_base + mem0_size - 1;
-	mv_bus1_controller.pcic.mem_offset	= mem0_base;
-	mv_bus1_controller.pcic.io_offset	= 0;
-
-	ioport_resource.end		= io_base + io_size -mv_io_base - 1;
-
-	register_pci_controller(&mv_bus1_controller.pcic);
-
-	mv_io_size = io_base + io_size - mv_io_base;
-}
-
-static __init int __init ja_pci_init(void)
-{
-	unsigned long io_v_base;
-	uint32_t enable;
-
-	enable = ~MV_READ(MV64340_BASE_ADDR_ENABLE);
-
-	/*
-	 * We require at least one enabled I/O or PCI memory window or we
-	 * will ignore this PCI bus.  We ignore PCI windows 1, 2 and 3.
-	 */
-	if (enable & (0x01 <<  9) || enable & (0x01 << 10))
-		ja_pci0_init();
-
-	if (enable & (0x01 << 14) || enable & (0x01 << 15))
-		ja_pci1_init();
-
-	if (mv_io_size) {
-		io_v_base = (unsigned long) ioremap(mv_io_base, mv_io_size);
-		if (!io_v_base)
-			panic("Could not ioremap I/O port range");
-
-		set_io_port_base(io_v_base);
-	}
-
-	return 0;
-}
-
-arch_initcall(ja_pci_init);
-
-void __init plat_mem_setup(void)
-{
-	unsigned int tmpword;
-
-	board_time_init = momenco_time_init;
-
-	_machine_restart = momenco_jaguar_restart;
-	_machine_halt = momenco_jaguar_halt;
-	pm_power_off = momenco_jaguar_power_off;
-
-	/*
-	 * initrd_start = (unsigned long)jaguar_initrd_start;
-	 * initrd_end = (unsigned long)jaguar_initrd_start + (ulong)jaguar_initrd_size;
-	 * initrd_below_start_ok = 1;
-	 */
-
-	wire_stupidity_into_tlb();
-
-	/*
-	 * shut down ethernet ports, just to be sure our memory doesn't get
-	 * corrupted by random ethernet traffic.
-	 */
-	MV_WRITE(MV643XX_ETH_TRANSMIT_QUEUE_COMMAND_REG(0), 0xff << 8);
-	MV_WRITE(MV643XX_ETH_TRANSMIT_QUEUE_COMMAND_REG(1), 0xff << 8);
-	MV_WRITE(MV643XX_ETH_TRANSMIT_QUEUE_COMMAND_REG(2), 0xff << 8);
-	MV_WRITE(MV643XX_ETH_RECEIVE_QUEUE_COMMAND_REG(0), 0xff << 8);
-	MV_WRITE(MV643XX_ETH_RECEIVE_QUEUE_COMMAND_REG(1), 0xff << 8);
-	MV_WRITE(MV643XX_ETH_RECEIVE_QUEUE_COMMAND_REG(2), 0xff << 8);
-	while (MV_READ(MV643XX_ETH_RECEIVE_QUEUE_COMMAND_REG(0)) & 0xff);
-	while (MV_READ(MV643XX_ETH_RECEIVE_QUEUE_COMMAND_REG(1)) & 0xff);
-	while (MV_READ(MV643XX_ETH_RECEIVE_QUEUE_COMMAND_REG(2)) & 0xff);
-	while (MV_READ(MV643XX_ETH_TRANSMIT_QUEUE_COMMAND_REG(0)) & 0xff);
-	while (MV_READ(MV643XX_ETH_TRANSMIT_QUEUE_COMMAND_REG(1)) & 0xff);
-	while (MV_READ(MV643XX_ETH_TRANSMIT_QUEUE_COMMAND_REG(2)) & 0xff);
-	MV_WRITE(MV643XX_ETH_PORT_SERIAL_CONTROL_REG(0),
-	         MV_READ(MV643XX_ETH_PORT_SERIAL_CONTROL_REG(0)) & ~1);
-	MV_WRITE(MV643XX_ETH_PORT_SERIAL_CONTROL_REG(1),
-	         MV_READ(MV643XX_ETH_PORT_SERIAL_CONTROL_REG(1)) & ~1);
-	MV_WRITE(MV643XX_ETH_PORT_SERIAL_CONTROL_REG(2),
-	         MV_READ(MV643XX_ETH_PORT_SERIAL_CONTROL_REG(2)) & ~1);
-
-	/* Turn off the Bit-Error LED */
-	JAGUAR_FPGA_WRITE(0x80, CLR);
-
-	tmpword = JAGUAR_FPGA_READ(BOARDREV);
-	if (tmpword < 26)
-		printk("Momentum Jaguar-ATX: Board Assembly Rev. %c\n",
-			'A'+tmpword);
-	else
-		printk("Momentum Jaguar-ATX: Board Assembly Revision #0x%x\n",
-			tmpword);
-
-	tmpword = JAGUAR_FPGA_READ(FPGA_REV);
-	printk("FPGA Rev: %d.%d\n", tmpword>>4, tmpword&15);
-	tmpword = JAGUAR_FPGA_READ(RESET_STATUS);
-	printk("Reset reason: 0x%x\n", tmpword);
-	switch (tmpword) {
-	case 0x1:
-		printk("  - Power-up reset\n");
-		break;
-	case 0x2:
-		printk("  - Push-button reset\n");
-		break;
-	case 0x8:
-		printk("  - Watchdog reset\n");
-		break;
-	case 0x10:
-		printk("  - JTAG reset\n");
-		break;
-	default:
-		printk("  - Unknown reset cause\n");
-	}
-	reset_reason = tmpword;
-	JAGUAR_FPGA_WRITE(0xff, RESET_STATUS);
-
-	tmpword = JAGUAR_FPGA_READ(BOARD_STATUS);
-	printk("Board Status register: 0x%02x\n", tmpword);
-	printk("  - User jumper: %s\n", (tmpword & 0x80)?"installed":"absent");
-	printk("  - Boot flash write jumper: %s\n", (tmpword&0x40)?"installed":"absent");
-
-	/* 256MiB of RM9000x2 DDR */
-//	add_memory_region(0x0, 0x100<<20, BOOT_MEM_RAM);
-
-	/* 128MiB of MV-64340 DDR */
-//	add_memory_region(0x100<<20, 0x80<<20, BOOT_MEM_RAM);
-
-	/* XXX Memory configuration should be picked up from PMON2k */
-#ifdef CONFIG_JAGUAR_DMALOW
-	printk("Jaguar ATX DMA-low mode set\n");
-	add_memory_region(0x00000000, 0x08000000, BOOT_MEM_RAM);
-	add_memory_region(0x08000000, 0x10000000, BOOT_MEM_RAM);
-#else
-	/* 128MiB of MV-64340 DDR RAM */
-	printk("Jaguar ATX DMA-low mode is not set\n");
-	add_memory_region(0x100<<20, 0x80<<20, BOOT_MEM_RAM);
-#endif
-
-#ifdef GEMDEBUG_TRACEBUFFER
-	{
-	  unsigned int tbControl;
-	  tbControl =
-	    0 << 26 |  /* post trigger delay 0 */
-		    0x2 << 16 |		/* sequential trace mode */
-	    //	    0x0 << 16 |		/* non-sequential trace mode */
-	    //	    0xf << 4 |		/* watchpoints disabled */
-	    2 << 2 |		/* armed */
-	    2 ;			/* interrupt disabled  */
-	  printk ("setting     tbControl = %08lx\n", tbControl);
-	  write_32bit_cp0_set1_register($22, tbControl);
-	  __asm__ __volatile__(".set noreorder\n\t" \
-			       "nop; nop; nop; nop; nop; nop;\n\t" \
-			       "nop; nop; nop; nop; nop; nop;\n\t" \
-			       ".set reorder\n\t");
-
-	}
-#endif
-}
diff --git a/arch/mips/pci/Makefile b/arch/mips/pci/Makefile
index 30a1c79c6f5..aba3dbf47ed 100644
--- a/arch/mips/pci/Makefile
+++ b/arch/mips/pci/Makefile
@@ -30,7 +30,6 @@ obj-$(CONFIG_SOC_AU1500)	+= fixup-au1000.o ops-au1000.o
 obj-$(CONFIG_SOC_AU1550)	+= fixup-au1000.o ops-au1000.o
 obj-$(CONFIG_SOC_PNX8550)	+= fixup-pnx8550.o ops-pnx8550.o
 obj-$(CONFIG_MIPS_MALTA)	+= fixup-malta.o
-obj-$(CONFIG_MOMENCO_JAGUAR_ATX)+= fixup-jaguar.o
 obj-$(CONFIG_MOMENCO_OCELOT)	+= fixup-ocelot.o pci-ocelot.o
 obj-$(CONFIG_MOMENCO_OCELOT_3)	+= fixup-ocelot3.o
 obj-$(CONFIG_MOMENCO_OCELOT_C)	+= fixup-ocelot-c.o pci-ocelot-c.o
diff --git a/arch/mips/pci/fixup-jaguar.c b/arch/mips/pci/fixup-jaguar.c
deleted file mode 100644
index 6c5e1d47179..00000000000
--- a/arch/mips/pci/fixup-jaguar.c
+++ /dev/null
@@ -1,43 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Marvell MV64340 interrupt fixup code.
- *
- * Marvell wants an NDA for their docs so this was written without
- * documentation.  You've been warned.
- *
- * Copyright (C) 2004 Ralf Baechle (ralf@linux-mips.org)
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/pci.h>
-
-#include <asm/mipsregs.h>
-
-/*
- * WARNING: Example of how _NOT_ to do it.
- */
-int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
-{
-	int bus = dev->bus->number;
-
-	if (bus == 0 && slot == 1)
-		return 3;	/* PCI-X A */
-	if (bus == 0 && slot == 2)
-		return 4;	/* PCI-X B */
-	if (bus == 1 && slot == 1)
-		return 5;	/* PCI A */
-	if (bus == 1 && slot == 2)
-		return 6;	/* PCI B */
-
-return 0;
-	panic("Whooops in pcibios_map_irq");
-}
-
-/* Do platform specific device initialization at pci_enable_device() time */
-int pcibios_plat_dev_init(struct pci_dev *dev)
-{
-	return 0;
-}
diff --git a/include/asm-mips/bootinfo.h b/include/asm-mips/bootinfo.h
index 198ecc08ab4..b0c329783ac 100644
--- a/include/asm-mips/bootinfo.h
+++ b/include/asm-mips/bootinfo.h
@@ -121,7 +121,7 @@
 #define  MACH_MOMENCO_OCELOT	0
 #define  MACH_MOMENCO_OCELOT_G	1	/* no more supported (may 2007) */
 #define  MACH_MOMENCO_OCELOT_C	2
-#define  MACH_MOMENCO_JAGUAR_ATX 3
+#define  MACH_MOMENCO_JAGUAR_ATX 3	/* no more supported (may 2007) */
 #define  MACH_MOMENCO_OCELOT_3	4
 
 /*
diff --git a/include/asm-mips/mach-ja/cpu-feature-overrides.h b/include/asm-mips/mach-ja/cpu-feature-overrides.h
deleted file mode 100644
index 84b6dead0e8..00000000000
--- a/include/asm-mips/mach-ja/cpu-feature-overrides.h
+++ /dev/null
@@ -1,45 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2003, 2004 Ralf Baechle
- */
-#ifndef __ASM_MACH_JA_CPU_FEATURE_OVERRIDES_H
-#define __ASM_MACH_JA_CPU_FEATURE_OVERRIDES_H
-
-/*
- * Momentum Jaguar ATX always has the RM9000 processor.
- */
-#define cpu_has_watch		1
-#define cpu_has_mips16		0
-#define cpu_has_divec		0
-#define cpu_has_vce		0
-#define cpu_has_cache_cdex_p	0
-#define cpu_has_cache_cdex_s	0
-#define cpu_has_prefetch	1
-#define cpu_has_mcheck		0
-#define cpu_has_ejtag		0
-
-#define cpu_has_llsc		1
-#define cpu_has_vtag_icache	0
-#define cpu_has_dc_aliases	0
-#define cpu_has_ic_fills_f_dc	0
-#define cpu_has_dsp		0
-#define cpu_icache_snoops_remote_store	0
-
-#define cpu_has_nofpuex		0
-#define cpu_has_64bits		1
-
-#define cpu_has_inclusive_pcaches	0
-
-#define cpu_dcache_line_size()	32
-#define cpu_icache_line_size()	32
-#define cpu_scache_line_size()	32
-
-#define cpu_has_mips32r1	0
-#define cpu_has_mips32r2	0
-#define cpu_has_mips64r1	0
-#define cpu_has_mips64r2	0
-
-#endif /* __ASM_MACH_JA_CPU_FEATURE_OVERRIDES_H */
diff --git a/include/asm-mips/mach-ja/spaces.h b/include/asm-mips/mach-ja/spaces.h
deleted file mode 100644
index 8466a0e69c7..00000000000
--- a/include/asm-mips/mach-ja/spaces.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 1994 - 1999, 2000, 03, 04 Ralf Baechle
- * Copyright (C) 2000, 2002  Maciej W. Rozycki
- * Copyright (C) 1990, 1999, 2000 Silicon Graphics, Inc.
- */
-#ifndef __ASM_MACH_JA_SPACES_H
-#define __ASM_MACH_JA_SPACES_H
-
-/*
- * Memory above this physical address will be considered highmem.
- */
-#define HIGHMEM_START		0x08000000UL
-
-#include_next <spaces.h>
-
-#endif /* __ASM_MACH_JA_SPACES_H */
diff --git a/include/asm-mips/serial.h b/include/asm-mips/serial.h
index 5e0da6e2d69..ce51213d84f 100644
--- a/include/asm-mips/serial.h
+++ b/include/asm-mips/serial.h
@@ -81,25 +81,6 @@
 #define STD_SERIAL_PORT_DEFNS
 #endif /* CONFIG_HAVE_STD_PC_SERIAL_PORTS */
 
-#ifdef CONFIG_MOMENCO_JAGUAR_ATX
-/* Ordinary NS16552 duart with a 20MHz crystal.  */
-#define JAGUAR_ATX_UART_CLK	20000000
-#define JAGUAR_ATX_BASE_BAUD	(JAGUAR_ATX_UART_CLK / 16)
-
-#define JAGUAR_ATX_SERIAL1_IRQ	6
-#define JAGUAR_ATX_SERIAL1_BASE	0xfd000023L
-
-#define _JAGUAR_ATX_SERIAL_INIT(int, base)				\
-	{ .baud_base = JAGUAR_ATX_BASE_BAUD, irq: int,			\
-	  .flags = (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST),		\
-	  .iomem_base = (u8 *) base, iomem_reg_shift: 2,			\
-	  io_type: SERIAL_IO_MEM }
-#define MOMENCO_JAGUAR_ATX_SERIAL_PORT_DEFNS				\
-	_JAGUAR_ATX_SERIAL_INIT(JAGUAR_ATX_SERIAL1_IRQ, JAGUAR_ATX_SERIAL1_BASE)
-#else
-#define MOMENCO_JAGUAR_ATX_SERIAL_PORT_DEFNS
-#endif
-
 #ifdef CONFIG_MOMENCO_OCELOT_3
 #define OCELOT_3_BASE_BAUD	( 20000000 / 16 )
 #define OCELOT_3_SERIAL_IRQ	6