summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2011-11-03 08:22:06 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2011-11-03 08:22:06 -0700
commitcf0223503e6198292cdcc864e01eeb5fe7490752 (patch)
tree5ed99ae5fc7a67ec19df19f4b46b0c04d97db174
parent3f8ddb032afa729d4bad1bf2965d3ec068de6b72 (diff)
parente857bfd4604a3a4edaf9c7038db880d9f78aecbd (diff)
Merge branch 'sh-latest' of git://github.com/pmundt/linux-sh
* 'sh-latest' of git://github.com/pmundt/linux-sh: sh: Add default uImage rule for sh7757lcr sh: modify the asm/sh_eth.h to linux/sh_eth.h in sh7757lcr sh: userimask.c needs linux/stat.h sh: pfc: Add GPIO IRQ support sh: modify the asm/sh_eth.h to linux/sh_eth.h in some boards sh: pfc: Remove unused gpio_in_use member sh: add parameters for EHCI and RIIC in clock-sh7757.c sh: kexec: Add PHYSICAL_START SH: irq: Remove IRQF_DISABLED sh: pfc: get_config_reg() shift clean up sh: intc: Add IRQ trigger bit field check sh: drop unused Kconfig symbol sh: Fix implicit declaration of function numa_node_id sh: kexec: Register crashk_res sh: ecovec: add renesas_usbhs DMAEngine support
-rw-r--r--arch/sh/Kconfig17
-rw-r--r--arch/sh/Makefile1
-rw-r--r--arch/sh/boards/board-espt.c2
-rw-r--r--arch/sh/boards/board-secureedge5410.c3
-rw-r--r--arch/sh/boards/board-sh7757lcr.c2
-rw-r--r--arch/sh/boards/mach-cayman/irq.c2
-rw-r--r--arch/sh/boards/mach-ecovec24/setup.c6
-rw-r--r--arch/sh/boards/mach-hp6xx/hp6xx_apm.c2
-rw-r--r--arch/sh/boards/mach-se/7724/setup.c2
-rw-r--r--arch/sh/boards/mach-sh7763rdp/setup.c2
-rw-r--r--arch/sh/boot/Makefile6
-rw-r--r--arch/sh/drivers/dma/dma-g2.c2
-rw-r--r--arch/sh/drivers/dma/dma-pvr2.c1
-rw-r--r--arch/sh/drivers/dma/dma-sh.c4
-rw-r--r--arch/sh/drivers/dma/dmabrg.c6
-rw-r--r--arch/sh/drivers/pci/pci-sh5.c4
-rw-r--r--arch/sh/drivers/pci/pci-sh7780.c2
-rw-r--r--arch/sh/drivers/push-switch.c2
-rw-r--r--arch/sh/include/asm/page.h10
-rw-r--r--arch/sh/kernel/cpu/sh4a/clock-sh7757.c10
-rw-r--r--arch/sh/kernel/cpu/sh4a/smp-shx3.c2
-rw-r--r--arch/sh/kernel/setup.c9
-rw-r--r--arch/sh/kernel/topology.c1
-rw-r--r--arch/sh/kernel/vmlinux.lds.S2
-rw-r--r--arch/sh/mm/init.c8
-rw-r--r--drivers/sh/intc/chip.c9
-rw-r--r--drivers/sh/intc/userimask.c1
-rw-r--r--drivers/sh/pfc.c29
-rw-r--r--include/linux/sh_pfc.h12
29 files changed, 117 insertions, 42 deletions
diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index ff9177c8f64..5629e209913 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -101,10 +101,6 @@ config GENERIC_LOCKBREAK
def_bool y
depends on SMP && PREEMPT
-config SYS_SUPPORTS_PM
- bool
- depends on !SMP
-
config ARCH_SUSPEND_POSSIBLE
def_bool n
@@ -649,7 +645,7 @@ config CRASH_DUMP
a specially reserved region and then later executed after
a crash by kdump/kexec. The crash dump kernel must be compiled
to a memory address not used by the main kernel using
- MEMORY_START.
+ PHYSICAL_START.
For more details see Documentation/kdump/kdump.txt
@@ -660,6 +656,17 @@ config KEXEC_JUMP
Jump between original kernel and kexeced kernel and invoke
code via KEXEC
+config PHYSICAL_START
+ hex "Physical address where the kernel is loaded" if (EXPERT || CRASH_DUMP)
+ default MEMORY_START
+ ---help---
+ This gives the physical address where the kernel is loaded
+ and is ordinarily the same as MEMORY_START.
+
+ Different values are primarily used in the case of kexec on panic
+ where the fail safe kernel needs to run at a different address
+ than the panic-ed kernel.
+
config SECCOMP
bool "Enable seccomp to safely compute untrusted bytecode"
depends on PROC_FS
diff --git a/arch/sh/Makefile b/arch/sh/Makefile
index 99385d0b3f3..3fc0f413777 100644
--- a/arch/sh/Makefile
+++ b/arch/sh/Makefile
@@ -80,6 +80,7 @@ defaultimage-$(CONFIG_SH_RSK) := uImage
defaultimage-$(CONFIG_SH_URQUELL) := uImage
defaultimage-$(CONFIG_SH_MIGOR) := uImage
defaultimage-$(CONFIG_SH_AP325RXA) := uImage
+defaultimage-$(CONFIG_SH_SH7757LCR) := uImage
defaultimage-$(CONFIG_SH_7724_SOLUTION_ENGINE) := uImage
defaultimage-$(CONFIG_SH_7206_SOLUTION_ENGINE) := vmlinux
defaultimage-$(CONFIG_SH_7619_SOLUTION_ENGINE) := vmlinux
diff --git a/arch/sh/boards/board-espt.c b/arch/sh/boards/board-espt.c
index 9da92ac3653..b3ae9d38cbc 100644
--- a/arch/sh/boards/board-espt.c
+++ b/arch/sh/boards/board-espt.c
@@ -13,9 +13,9 @@
#include <linux/interrupt.h>
#include <linux/mtd/physmap.h>
#include <linux/io.h>
+#include <linux/sh_eth.h>
#include <asm/machvec.h>
#include <asm/sizes.h>
-#include <asm/sh_eth.h>
/* NOR Flash */
static struct mtd_partition espt_nor_flash_partitions[] = {
diff --git a/arch/sh/boards/board-secureedge5410.c b/arch/sh/boards/board-secureedge5410.c
index f968f17891a..03820c3c93d 100644
--- a/arch/sh/boards/board-secureedge5410.c
+++ b/arch/sh/boards/board-secureedge5410.c
@@ -41,8 +41,7 @@ static int __init eraseconfig_init(void)
printk("SnapGear: EraseConfig init\n");
/* Setup "EraseConfig" switch on external IRQ 0 */
- if (request_irq(irq, eraseconfig_interrupt, IRQF_DISABLED,
- "Erase Config", NULL))
+ if (request_irq(irq, eraseconfig_interrupt, 0, "Erase Config", NULL))
printk("SnapGear: failed to register IRQ%d for Reset witch\n",
irq);
else
diff --git a/arch/sh/boards/board-sh7757lcr.c b/arch/sh/boards/board-sh7757lcr.c
index fa2a208ec6c..ec8c84c14b1 100644
--- a/arch/sh/boards/board-sh7757lcr.c
+++ b/arch/sh/boards/board-sh7757lcr.c
@@ -18,8 +18,8 @@
#include <linux/mmc/host.h>
#include <linux/mmc/sh_mmcif.h>
#include <linux/mmc/sh_mobile_sdhi.h>
+#include <linux/sh_eth.h>
#include <cpu/sh7757.h>
-#include <asm/sh_eth.h>
#include <asm/heartbeat.h>
static struct resource heartbeat_resource = {
diff --git a/arch/sh/boards/mach-cayman/irq.c b/arch/sh/boards/mach-cayman/irq.c
index 311bcebdbd0..724e8b7271f 100644
--- a/arch/sh/boards/mach-cayman/irq.c
+++ b/arch/sh/boards/mach-cayman/irq.c
@@ -46,13 +46,11 @@ static irqreturn_t cayman_interrupt_pci2(int irq, void *dev_id)
static struct irqaction cayman_action_smsc = {
.name = "Cayman SMSC Mux",
.handler = cayman_interrupt_smsc,
- .flags = IRQF_DISABLED,
};
static struct irqaction cayman_action_pci2 = {
.name = "Cayman PCI2 Mux",
.handler = cayman_interrupt_pci2,
- .flags = IRQF_DISABLED,
};
static void enable_cayman_irq(struct irq_data *data)
diff --git a/arch/sh/boards/mach-ecovec24/setup.c b/arch/sh/boards/mach-ecovec24/setup.c
index b24d69d509e..92ddce4b345 100644
--- a/arch/sh/boards/mach-ecovec24/setup.c
+++ b/arch/sh/boards/mach-ecovec24/setup.c
@@ -28,13 +28,13 @@
#include <linux/spi/mmc_spi.h>
#include <linux/input.h>
#include <linux/input/sh_keysc.h>
+#include <linux/sh_eth.h>
#include <video/sh_mobile_lcdc.h>
#include <sound/sh_fsi.h>
#include <media/sh_mobile_ceu.h>
#include <media/tw9910.h>
#include <media/mt9t112.h>
#include <asm/heartbeat.h>
-#include <asm/sh_eth.h>
#include <asm/clock.h>
#include <asm/suspend.h>
#include <cpu/sh7724.h>
@@ -248,6 +248,10 @@ static struct renesas_usbhs_platform_info usbhs_info = {
.driver_param = {
.buswait_bwait = 4,
.detection_delay = 5,
+ .d0_tx_id = SHDMA_SLAVE_USB1D0_TX,
+ .d0_rx_id = SHDMA_SLAVE_USB1D0_RX,
+ .d1_tx_id = SHDMA_SLAVE_USB1D1_TX,
+ .d1_rx_id = SHDMA_SLAVE_USB1D1_RX,
},
};
diff --git a/arch/sh/boards/mach-hp6xx/hp6xx_apm.c b/arch/sh/boards/mach-hp6xx/hp6xx_apm.c
index b49535c0ddd..865d8d6e823 100644
--- a/arch/sh/boards/mach-hp6xx/hp6xx_apm.c
+++ b/arch/sh/boards/mach-hp6xx/hp6xx_apm.c
@@ -86,7 +86,7 @@ static int __init hp6x0_apm_init(void)
int ret;
ret = request_irq(HP680_BTN_IRQ, hp6x0_apm_interrupt,
- IRQF_DISABLED, MODNAME, NULL);
+ 0, MODNAME, NULL);
if (unlikely(ret < 0)) {
printk(KERN_ERR MODNAME ": IRQ %d request failed\n",
HP680_BTN_IRQ);
diff --git a/arch/sh/boards/mach-se/7724/setup.c b/arch/sh/boards/mach-se/7724/setup.c
index d00756728bd..b747c0ab926 100644
--- a/arch/sh/boards/mach-se/7724/setup.c
+++ b/arch/sh/boards/mach-se/7724/setup.c
@@ -23,12 +23,12 @@
#include <linux/input.h>
#include <linux/input/sh_keysc.h>
#include <linux/usb/r8a66597.h>
+#include <linux/sh_eth.h>
#include <video/sh_mobile_lcdc.h>
#include <media/sh_mobile_ceu.h>
#include <sound/sh_fsi.h>
#include <asm/io.h>
#include <asm/heartbeat.h>
-#include <asm/sh_eth.h>
#include <asm/clock.h>
#include <asm/suspend.h>
#include <cpu/sh7724.h>
diff --git a/arch/sh/boards/mach-sh7763rdp/setup.c b/arch/sh/boards/mach-sh7763rdp/setup.c
index f3d828f133e..dd036f1661d 100644
--- a/arch/sh/boards/mach-sh7763rdp/setup.c
+++ b/arch/sh/boards/mach-sh7763rdp/setup.c
@@ -17,8 +17,8 @@
#include <linux/mtd/physmap.h>
#include <linux/fb.h>
#include <linux/io.h>
+#include <linux/sh_eth.h>
#include <mach/sh7763rdp.h>
-#include <asm/sh_eth.h>
#include <asm/sh7760fb.h>
/* NOR Flash */
diff --git a/arch/sh/boot/Makefile b/arch/sh/boot/Makefile
index ba515d80024..e4ea31a62c5 100644
--- a/arch/sh/boot/Makefile
+++ b/arch/sh/boot/Makefile
@@ -19,6 +19,7 @@ CONFIG_MEMORY_START ?= 0x0c000000
CONFIG_BOOT_LINK_OFFSET ?= 0x00800000
CONFIG_ZERO_PAGE_OFFSET ?= 0x00001000
CONFIG_ENTRY_OFFSET ?= 0x00001000
+CONFIG_PHYSICAL_START ?= $(CONFIG_MEMORY_START)
suffix-y := bin
suffix-$(CONFIG_KERNEL_GZIP) := gz
@@ -48,7 +49,7 @@ $(obj)/romimage/vmlinux: $(obj)/zImage FORCE
$(Q)$(MAKE) $(build)=$(obj)/romimage $@
KERNEL_MEMORY := $(shell /bin/bash -c 'printf "0x%08x" \
- $$[$(CONFIG_MEMORY_START) & 0x1fffffff]')
+ $$[$(CONFIG_PHYSICAL_START) & 0x1fffffff]')
KERNEL_LOAD := $(shell /bin/bash -c 'printf "0x%08x" \
$$[$(CONFIG_PAGE_OFFSET) + \
@@ -114,4 +115,5 @@ $(obj)/uImage: $(obj)/uImage.$(suffix-y)
@echo ' Image $@ is ready'
export CONFIG_PAGE_OFFSET CONFIG_MEMORY_START CONFIG_BOOT_LINK_OFFSET \
- CONFIG_ZERO_PAGE_OFFSET CONFIG_ENTRY_OFFSET KERNEL_MEMORY suffix-y
+ CONFIG_PHYSICAL_START CONFIG_ZERO_PAGE_OFFSET CONFIG_ENTRY_OFFSET \
+ KERNEL_MEMORY suffix-y
diff --git a/arch/sh/drivers/dma/dma-g2.c b/arch/sh/drivers/dma/dma-g2.c
index af7bb589c2c..be9ca7ca0ce 100644
--- a/arch/sh/drivers/dma/dma-g2.c
+++ b/arch/sh/drivers/dma/dma-g2.c
@@ -170,7 +170,7 @@ static int __init g2_dma_init(void)
{
int ret;
- ret = request_irq(HW_EVENT_G2_DMA, g2_dma_interrupt, IRQF_DISABLED,
+ ret = request_irq(HW_EVENT_G2_DMA, g2_dma_interrupt, 0,
"g2 DMA handler", &g2_dma_info);
if (unlikely(ret))
return -EINVAL;
diff --git a/arch/sh/drivers/dma/dma-pvr2.c b/arch/sh/drivers/dma/dma-pvr2.c
index 3cee58e7f1e..706a3434af7 100644
--- a/arch/sh/drivers/dma/dma-pvr2.c
+++ b/arch/sh/drivers/dma/dma-pvr2.c
@@ -70,7 +70,6 @@ static int pvr2_xfer_dma(struct dma_channel *chan)
static struct irqaction pvr2_dma_irq = {
.name = "pvr2 DMA handler",
.handler = pvr2_dma_interrupt,
- .flags = IRQF_DISABLED,
};
static struct dma_ops pvr2_dma_ops = {
diff --git a/arch/sh/drivers/dma/dma-sh.c b/arch/sh/drivers/dma/dma-sh.c
index 827208781ed..a60da6dd4d1 100644
--- a/arch/sh/drivers/dma/dma-sh.c
+++ b/arch/sh/drivers/dma/dma-sh.c
@@ -95,7 +95,7 @@ static int sh_dmac_request_dma(struct dma_channel *chan)
#if defined(CONFIG_SH_DMA_IRQ_MULTI)
IRQF_SHARED,
#else
- IRQF_DISABLED,
+ 0,
#endif
chan->dev_id, chan);
}
@@ -305,7 +305,7 @@ static int __init sh_dmac_init(void)
#if defined(CONFIG_SH_DMA_IRQ_MULTI)
IRQF_SHARED,
#else
- IRQF_DISABLED,
+ 0,
#endif
dmae_name[n], (void *)dmae_name[n]);
if (unlikely(i < 0)) {
diff --git a/arch/sh/drivers/dma/dmabrg.c b/arch/sh/drivers/dma/dmabrg.c
index 6ab9c4a1543..3d66a32ce61 100644
--- a/arch/sh/drivers/dma/dmabrg.c
+++ b/arch/sh/drivers/dma/dmabrg.c
@@ -174,17 +174,17 @@ static int __init dmabrg_init(void)
or = __raw_readl(DMAOR);
__raw_writel(or | DMAOR_BRG | DMAOR_DMEN, DMAOR);
- ret = request_irq(DMABRGI0, dmabrg_irq, IRQF_DISABLED,
+ ret = request_irq(DMABRGI0, dmabrg_irq, 0,
"DMABRG USB address error", NULL);
if (ret)
goto out0;
- ret = request_irq(DMABRGI1, dmabrg_irq, IRQF_DISABLED,
+ ret = request_irq(DMABRGI1, dmabrg_irq, 0,
"DMABRG Transfer End", NULL);
if (ret)
goto out1;
- ret = request_irq(DMABRGI2, dmabrg_irq, IRQF_DISABLED,
+ ret = request_irq(DMABRGI2, dmabrg_irq, 0,
"DMABRG Transfer Half", NULL);
if (ret == 0)
return ret;
diff --git a/arch/sh/drivers/pci/pci-sh5.c b/arch/sh/drivers/pci/pci-sh5.c
index 0bf296c7879..16c1e721bf5 100644
--- a/arch/sh/drivers/pci/pci-sh5.c
+++ b/arch/sh/drivers/pci/pci-sh5.c
@@ -107,13 +107,13 @@ static int __init sh5pci_init(void)
u32 uval;
if (request_irq(IRQ_ERR, pcish5_err_irq,
- IRQF_DISABLED, "PCI Error",NULL) < 0) {
+ 0, "PCI Error",NULL) < 0) {
printk(KERN_ERR "PCISH5: Cannot hook PCI_PERR interrupt\n");
return -EINVAL;
}
if (request_irq(IRQ_SERR, pcish5_serr_irq,
- IRQF_DISABLED, "PCI SERR interrupt", NULL) < 0) {
+ 0, "PCI SERR interrupt", NULL) < 0) {
printk(KERN_ERR "PCISH5: Cannot hook PCI_SERR interrupt\n");
return -EINVAL;
}
diff --git a/arch/sh/drivers/pci/pci-sh7780.c b/arch/sh/drivers/pci/pci-sh7780.c
index edb7cca1488..fa7b978cc72 100644
--- a/arch/sh/drivers/pci/pci-sh7780.c
+++ b/arch/sh/drivers/pci/pci-sh7780.c
@@ -172,7 +172,7 @@ static int __init sh7780_pci_setup_irqs(struct pci_channel *hose)
PCI_STATUS_SIG_TARGET_ABORT | \
PCI_STATUS_PARITY, hose->reg_base + PCI_STATUS);
- ret = request_irq(hose->serr_irq, sh7780_pci_serr_irq, IRQF_DISABLED,
+ ret = request_irq(hose->serr_irq, sh7780_pci_serr_irq, 0,
"PCI SERR interrupt", hose);
if (unlikely(ret)) {
printk(KERN_ERR "PCI: Failed hooking SERR IRQ\n");
diff --git a/arch/sh/drivers/push-switch.c b/arch/sh/drivers/push-switch.c
index afc24556572..637b79b0965 100644
--- a/arch/sh/drivers/push-switch.c
+++ b/arch/sh/drivers/push-switch.c
@@ -63,7 +63,7 @@ static int switch_drv_probe(struct platform_device *pdev)
BUG_ON(!psw_info);
ret = request_irq(irq, psw_info->irq_handler,
- IRQF_DISABLED | psw_info->irq_flags,
+ psw_info->irq_flags,
psw_info->name ? psw_info->name : DRV_NAME, pdev);
if (unlikely(ret < 0))
goto err;
diff --git a/arch/sh/include/asm/page.h b/arch/sh/include/asm/page.h
index 822d6084195..0dca9a5c6be 100644
--- a/arch/sh/include/asm/page.h
+++ b/arch/sh/include/asm/page.h
@@ -113,6 +113,16 @@ typedef struct page *pgtable_t;
#define __MEMORY_SIZE CONFIG_MEMORY_SIZE
/*
+ * PHYSICAL_OFFSET is the offset in physical memory where the base
+ * of the kernel is loaded.
+ */
+#ifdef CONFIG_PHYSICAL_START
+#define PHYSICAL_OFFSET (CONFIG_PHYSICAL_START - __MEMORY_START)
+#else
+#define PHYSICAL_OFFSET 0
+#endif
+
+/*
* PAGE_OFFSET is the virtual address of the start of kernel address
* space.
*/
diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7757.c b/arch/sh/kernel/cpu/sh4a/clock-sh7757.c
index 3b097b09a3b..19222dae823 100644
--- a/arch/sh/kernel/cpu/sh4a/clock-sh7757.c
+++ b/arch/sh/kernel/cpu/sh4a/clock-sh7757.c
@@ -113,7 +113,14 @@ static struct clk_lookup lookups[] = {
/* MSTP32 clocks */
CLKDEV_CON_ID("sdhi0", &mstp_clks[MSTP004]),
- CLKDEV_CON_ID("riic", &mstp_clks[MSTP000]),
+ CLKDEV_CON_ID("riic0", &mstp_clks[MSTP000]),
+ CLKDEV_CON_ID("riic1", &mstp_clks[MSTP000]),
+ CLKDEV_CON_ID("riic2", &mstp_clks[MSTP000]),
+ CLKDEV_CON_ID("riic3", &mstp_clks[MSTP000]),
+ CLKDEV_CON_ID("riic4", &mstp_clks[MSTP000]),
+ CLKDEV_CON_ID("riic5", &mstp_clks[MSTP000]),
+ CLKDEV_CON_ID("riic6", &mstp_clks[MSTP000]),
+ CLKDEV_CON_ID("riic7", &mstp_clks[MSTP000]),
CLKDEV_ICK_ID("tmu_fck", "sh_tmu.0", &mstp_clks[MSTP113]),
CLKDEV_ICK_ID("tmu_fck", "sh_tmu.1", &mstp_clks[MSTP114]),
@@ -121,6 +128,7 @@ static struct clk_lookup lookups[] = {
CLKDEV_ICK_ID("sci_fck", "sh-sci.1", &mstp_clks[MSTP111]),
CLKDEV_ICK_ID("sci_fck", "sh-sci.0", &mstp_clks[MSTP110]),
+ CLKDEV_CON_ID("usb_fck", &mstp_clks[MSTP103]),
CLKDEV_CON_ID("usb0", &mstp_clks[MSTP102]),
CLKDEV_CON_ID("mmc0", &mstp_clks[MSTP220]),
};
diff --git a/arch/sh/kernel/cpu/sh4a/smp-shx3.c b/arch/sh/kernel/cpu/sh4a/smp-shx3.c
index de865cac02e..03f2b55757c 100644
--- a/arch/sh/kernel/cpu/sh4a/smp-shx3.c
+++ b/arch/sh/kernel/cpu/sh4a/smp-shx3.c
@@ -79,7 +79,7 @@ static void shx3_prepare_cpus(unsigned int max_cpus)
for (i = 0; i < SMP_MSG_NR; i++)
request_irq(104 + i, ipi_interrupt_handler,
- IRQF_DISABLED | IRQF_PERCPU, "IPI", (void *)(long)i);
+ IRQF_PERCPU, "IPI", (void *)(long)i);
for (i = 0; i < max_cpus; i++)
set_cpu_present(i, true);
diff --git a/arch/sh/kernel/setup.c b/arch/sh/kernel/setup.c
index 58bff45d115..1a0e946679a 100644
--- a/arch/sh/kernel/setup.c
+++ b/arch/sh/kernel/setup.c
@@ -211,13 +211,16 @@ void __init __add_active_range(unsigned int nid, unsigned long start_pfn,
}
/*
- * We don't know which RAM region contains kernel data,
- * so we try it repeatedly and let the resource manager
- * test it.
+ * We don't know which RAM region contains kernel data or
+ * the reserved crashkernel region, so try it repeatedly
+ * and let the resource manager test it.
*/
request_resource(res, &code_resource);
request_resource(res, &data_resource);
request_resource(res, &bss_resource);
+#ifdef CONFIG_KEXEC
+ request_resource(res, &crashk_res);
+#endif
/*
* Also make sure that there is a PMB mapping that covers this
diff --git a/arch/sh/kernel/topology.c b/arch/sh/kernel/topology.c
index 38e862852dd..ecc2d3d0f54 100644
--- a/arch/sh/kernel/topology.c
+++ b/arch/sh/kernel/topology.c
@@ -11,6 +11,7 @@
#include <linux/cpumask.h>
#include <linux/init.h>
#include <linux/percpu.h>
+#include <linux/topology.h>
#include <linux/node.h>
#include <linux/nodemask.h>
diff --git a/arch/sh/kernel/vmlinux.lds.S b/arch/sh/kernel/vmlinux.lds.S
index 731c10ce67b..c98905f71e2 100644
--- a/arch/sh/kernel/vmlinux.lds.S
+++ b/arch/sh/kernel/vmlinux.lds.S
@@ -23,7 +23,7 @@ OUTPUT_ARCH(sh)
ENTRY(_start)
SECTIONS
{
- . = PAGE_OFFSET + MEMORY_OFFSET + CONFIG_ZERO_PAGE_OFFSET;
+ . = PAGE_OFFSET + MEMORY_OFFSET + PHYSICAL_OFFSET + CONFIG_ZERO_PAGE_OFFSET;
_text = .; /* Text and read-only data */
diff --git a/arch/sh/mm/init.c b/arch/sh/mm/init.c
index 58a93fb3d96..c9dbace35b1 100644
--- a/arch/sh/mm/init.c
+++ b/arch/sh/mm/init.c
@@ -287,6 +287,8 @@ static void __init do_init_bootmem(void)
static void __init early_reserve_mem(void)
{
unsigned long start_pfn;
+ u32 zero_base = (u32)__MEMORY_START + (u32)PHYSICAL_OFFSET;
+ u32 start = zero_base + (u32)CONFIG_ZERO_PAGE_OFFSET;
/*
* Partially used pages are not usable - thus
@@ -300,15 +302,13 @@ static void __init early_reserve_mem(void)
* this catches the (definitely buggy) case of us accidentally
* initializing the bootmem allocator with an invalid RAM area.
*/
- memblock_reserve(__MEMORY_START + CONFIG_ZERO_PAGE_OFFSET,
- (PFN_PHYS(start_pfn) + PAGE_SIZE - 1) -
- (__MEMORY_START + CONFIG_ZERO_PAGE_OFFSET));
+ memblock_reserve(start, (PFN_PHYS(start_pfn) + PAGE_SIZE - 1) - start);
/*
* Reserve physical pages below CONFIG_ZERO_PAGE_OFFSET.
*/
if (CONFIG_ZERO_PAGE_OFFSET != 0)
- memblock_reserve(__MEMORY_START, CONFIG_ZERO_PAGE_OFFSET);
+ memblock_reserve(zero_base, CONFIG_ZERO_PAGE_OFFSET);
/*
* Handle additional early reservations
diff --git a/drivers/sh/intc/chip.c b/drivers/sh/intc/chip.c
index 33b2ed451e0..e0ada377378 100644
--- a/drivers/sh/intc/chip.c
+++ b/drivers/sh/intc/chip.c
@@ -202,11 +202,16 @@ static int intc_set_type(struct irq_data *data, unsigned int type)
if (!value)
return -EINVAL;
+ value &= ~SENSE_VALID_FLAG;
+
ihp = intc_find_irq(d->sense, d->nr_sense, irq);
if (ihp) {
+ /* PINT has 2-bit sense registers, should fail on EDGE_BOTH */
+ if (value >= (1 << _INTC_WIDTH(ihp->handle)))
+ return -EINVAL;
+
addr = INTC_REG(d, _INTC_ADDR_E(ihp->handle), 0);
- intc_reg_fns[_INTC_FN(ihp->handle)](addr, ihp->handle,
- value & ~SENSE_VALID_FLAG);
+ intc_reg_fns[_INTC_FN(ihp->handle)](addr, ihp->handle, value);
}
return 0;
diff --git a/drivers/sh/intc/userimask.c b/drivers/sh/intc/userimask.c
index e32304b66cf..56bf9336b92 100644
--- a/drivers/sh/intc/userimask.c
+++ b/drivers/sh/intc/userimask.c
@@ -13,6 +13,7 @@
#include <linux/sysdev.h>
#include <linux/init.h>
#include <linux/io.h>
+#include <linux/stat.h>
#include <asm/sizes.h>
#include "internals.h"
diff --git a/drivers/sh/pfc.c b/drivers/sh/pfc.c
index 75934e3ea34..e67fe170d8d 100644
--- a/drivers/sh/pfc.c
+++ b/drivers/sh/pfc.c
@@ -217,7 +217,7 @@ static int get_config_reg(struct pinmux_info *gpioc, pinmux_enum_t enum_id,
if (!r_width)
break;
- for (n = 0; n < (r_width / f_width) * 1 << f_width; n++) {
+ for (n = 0; n < (r_width / f_width) * (1 << f_width); n++) {
if (config_reg->enum_ids[n] == enum_id) {
*crp = config_reg;
*indexp = n;
@@ -577,6 +577,32 @@ static void sh_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
sh_gpio_set_value(chip_to_pinmux(chip), offset, value);
}
+static int sh_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
+{
+ struct pinmux_info *gpioc = chip_to_pinmux(chip);
+ pinmux_enum_t enum_id;
+ pinmux_enum_t *enum_ids;
+ int i, k, pos;
+
+ pos = 0;
+ enum_id = 0;
+ while (1) {
+ pos = get_gpio_enum_id(gpioc, offset, pos, &enum_id);
+ if (pos <= 0 || !enum_id)
+ break;
+
+ for (i = 0; i < gpioc->gpio_irq_size; i++) {
+ enum_ids = gpioc->gpio_irq[i].enum_ids;
+ for (k = 0; enum_ids[k]; k++) {
+ if (enum_ids[k] == enum_id)
+ return gpioc->gpio_irq[i].irq;
+ }
+ }
+ }
+
+ return -ENOSYS;
+}
+
int register_pinmux(struct pinmux_info *pip)
{
struct gpio_chip *chip = &pip->chip;
@@ -592,6 +618,7 @@ int register_pinmux(struct pinmux_info *pip)
chip->get = sh_gpio_get;
chip->direction_output = sh_gpio_direction_output;
chip->set = sh_gpio_set;
+ chip->to_irq = sh_gpio_to_irq;
WARN_ON(pip->first_gpio != 0); /* needs testing */
diff --git a/include/linux/sh_pfc.h b/include/linux/sh_pfc.h
index 30cae70874f..bc8c9208f7e 100644
--- a/include/linux/sh_pfc.h
+++ b/include/linux/sh_pfc.h
@@ -61,6 +61,14 @@ struct pinmux_data_reg {
.reg = r, .reg_width = r_width, \
.enum_ids = (pinmux_enum_t [r_width]) \
+struct pinmux_irq {
+ int irq;
+ pinmux_enum_t *enum_ids;
+};
+
+#define PINMUX_IRQ(irq_nr, ids...) \
+ { .irq = irq_nr, .enum_ids = (pinmux_enum_t []) { ids, 0 } } \
+
struct pinmux_range {
pinmux_enum_t begin;
pinmux_enum_t end;
@@ -87,7 +95,9 @@ struct pinmux_info {
pinmux_enum_t *gpio_data;
unsigned int gpio_data_size;
- unsigned long *gpio_in_use;
+ struct pinmux_irq *gpio_irq;
+ unsigned int gpio_irq_size;
+
struct gpio_chip chip;
};