diff options
author | Jeff Garzik <jeff@garzik.org> | 2006-03-11 19:55:26 -0500 |
---|---|---|
committer | Jeff Garzik <jeff@garzik.org> | 2006-03-11 19:55:26 -0500 |
commit | ed071adc97a69785686a37fb88e100f41b482b94 (patch) | |
tree | 75be27a48365aab9cfe6531f7d1f5516e6602307 | |
parent | 6971ed1fbbc80cae54e082aae153d5b063885d0a (diff) | |
parent | 535744878e34d01a53f946f26dfbca37186f2cf8 (diff) |
Merge branch 'master'
-rw-r--r-- | Makefile | 2 | ||||
-rw-r--r-- | drivers/net/3c509.c | 13 | ||||
-rw-r--r-- | drivers/net/Kconfig | 3 | ||||
-rw-r--r-- | drivers/net/de620.c | 2 | ||||
-rw-r--r-- | drivers/net/dl2k.c | 25 | ||||
-rw-r--r-- | drivers/net/e1000/e1000_main.c | 2 | ||||
-rw-r--r-- | drivers/net/sky2.c | 32 | ||||
-rw-r--r-- | drivers/net/tulip/de2104x.c | 26 |
8 files changed, 62 insertions, 43 deletions
@@ -1,7 +1,7 @@ VERSION = 2 PATCHLEVEL = 6 SUBLEVEL = 16 -EXTRAVERSION =-rc5 +EXTRAVERSION =-rc6 NAME=Sliding Snow Leopard # *DOCUMENTATION* diff --git a/drivers/net/3c509.c b/drivers/net/3c509.c index 824e430486c..830528dce0c 100644 --- a/drivers/net/3c509.c +++ b/drivers/net/3c509.c @@ -1574,6 +1574,7 @@ MODULE_LICENSE("GPL"); static int __init el3_init_module(void) { + int ret = 0; el3_cards = 0; if (debug >= 0) @@ -1589,14 +1590,16 @@ static int __init el3_init_module(void) } #ifdef CONFIG_EISA - if (eisa_driver_register (&el3_eisa_driver) < 0) { - eisa_driver_unregister (&el3_eisa_driver); - } + ret = eisa_driver_register(&el3_eisa_driver); #endif #ifdef CONFIG_MCA - mca_register_driver(&el3_mca_driver); + { + int err = mca_register_driver(&el3_mca_driver); + if (ret == 0) + ret = err; + } #endif - return 0; + return ret; } static void __exit el3_cleanup_module(void) diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index e45a8f95971..aa633fa95e6 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -1087,7 +1087,8 @@ config NE2000 without a specific driver are compatible with NE2000. If you have a PCI NE2000 card however, say N here and Y to "PCI - NE2000 support", above. If you have a NE2000 card and are running on + NE2000 and clone support" under "EISA, VLB, PCI and on board + controllers" below. If you have a NE2000 card and are running on an MCA system (a bus system used on some IBM PS/2 computers and laptops), say N here and Y to "NE/2 (ne2000 MCA version) support", below. diff --git a/drivers/net/de620.c b/drivers/net/de620.c index 0069f5fa973..22fc5b869a6 100644 --- a/drivers/net/de620.c +++ b/drivers/net/de620.c @@ -1012,7 +1012,7 @@ static int __init read_eeprom(struct net_device *dev) #ifdef MODULE static struct net_device *de620_dev; -int init_module(void) +int __init init_module(void) { de620_dev = de620_probe(-1); if (IS_ERR(de620_dev)) diff --git a/drivers/net/dl2k.c b/drivers/net/dl2k.c index 430c628279b..fb9dae302dc 100644 --- a/drivers/net/dl2k.c +++ b/drivers/net/dl2k.c @@ -50,8 +50,8 @@ */ #define DRV_NAME "D-Link DL2000-based linux driver" -#define DRV_VERSION "v1.17a" -#define DRV_RELDATE "2002/10/04" +#define DRV_VERSION "v1.17b" +#define DRV_RELDATE "2006/03/10" #include "dl2k.h" static char version[] __devinitdata = @@ -765,7 +765,7 @@ rio_free_tx (struct net_device *dev, int irq) break; skb = np->tx_skbuff[entry]; pci_unmap_single (np->pdev, - np->tx_ring[entry].fraginfo, + np->tx_ring[entry].fraginfo & 0xffffffffffff, skb->len, PCI_DMA_TODEVICE); if (irq) dev_kfree_skb_irq (skb); @@ -892,14 +892,16 @@ receive_packet (struct net_device *dev) /* Small skbuffs for short packets */ if (pkt_len > copy_thresh) { - pci_unmap_single (np->pdev, desc->fraginfo, + pci_unmap_single (np->pdev, + desc->fraginfo & 0xffffffffffff, np->rx_buf_sz, PCI_DMA_FROMDEVICE); skb_put (skb = np->rx_skbuff[entry], pkt_len); np->rx_skbuff[entry] = NULL; } else if ((skb = dev_alloc_skb (pkt_len + 2)) != NULL) { pci_dma_sync_single_for_cpu(np->pdev, - desc->fraginfo, + desc->fraginfo & + 0xffffffffffff, np->rx_buf_sz, PCI_DMA_FROMDEVICE); skb->dev = dev; @@ -910,7 +912,8 @@ receive_packet (struct net_device *dev) pkt_len, 0); skb_put (skb, pkt_len); pci_dma_sync_single_for_device(np->pdev, - desc->fraginfo, + desc->fraginfo & + 0xffffffffffff, np->rx_buf_sz, PCI_DMA_FROMDEVICE); } @@ -1796,8 +1799,9 @@ rio_close (struct net_device *dev) np->rx_ring[i].fraginfo = 0; skb = np->rx_skbuff[i]; if (skb) { - pci_unmap_single (np->pdev, np->rx_ring[i].fraginfo, - skb->len, PCI_DMA_FROMDEVICE); + pci_unmap_single(np->pdev, + np->rx_ring[i].fraginfo & 0xffffffffffff, + skb->len, PCI_DMA_FROMDEVICE); dev_kfree_skb (skb); np->rx_skbuff[i] = NULL; } @@ -1805,8 +1809,9 @@ rio_close (struct net_device *dev) for (i = 0; i < TX_RING_SIZE; i++) { skb = np->tx_skbuff[i]; if (skb) { - pci_unmap_single (np->pdev, np->tx_ring[i].fraginfo, - skb->len, PCI_DMA_TODEVICE); + pci_unmap_single(np->pdev, + np->tx_ring[i].fraginfo & 0xffffffffffff, + skb->len, PCI_DMA_TODEVICE); dev_kfree_skb (skb); np->tx_skbuff[i] = NULL; } diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c index 5b7d0f425af..4c4db96d0b7 100644 --- a/drivers/net/e1000/e1000_main.c +++ b/drivers/net/e1000/e1000_main.c @@ -2917,7 +2917,7 @@ e1000_xmit_frame(struct sk_buff *skb, struct net_device *netdev) if (!__pskb_pull_tail(skb, pull_size)) { printk(KERN_ERR "__pskb_pull_tail failed.\n"); dev_kfree_skb_any(skb); - return -EFAULT; + return NETDEV_TX_OK; } len = skb->len - skb->data_len; } diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c index 72c1630977d..73260364cba 100644 --- a/drivers/net/sky2.c +++ b/drivers/net/sky2.c @@ -74,7 +74,7 @@ #define TX_RING_SIZE 512 #define TX_DEF_PENDING (TX_RING_SIZE - 1) #define TX_MIN_PENDING 64 -#define MAX_SKB_TX_LE (4 + 2*MAX_SKB_FRAGS) +#define MAX_SKB_TX_LE (4 + (sizeof(dma_addr_t)/sizeof(u32))*MAX_SKB_FRAGS) #define STATUS_RING_SIZE 2048 /* 2 ports * (TX + 2*RX) */ #define STATUS_LE_BYTES (STATUS_RING_SIZE*sizeof(struct sky2_status_le)) @@ -622,8 +622,8 @@ static void sky2_mac_init(struct sky2_hw *hw, unsigned port) /* Configure Rx MAC FIFO */ sky2_write8(hw, SK_REG(port, RX_GMF_CTRL_T), GMF_RST_CLR); - sky2_write16(hw, SK_REG(port, RX_GMF_CTRL_T), - GMF_RX_CTRL_DEF); + sky2_write32(hw, SK_REG(port, RX_GMF_CTRL_T), + GMF_OPER_ON | GMF_RX_F_FL_ON); /* Flush Rx MAC FIFO on any flow control or error */ sky2_write16(hw, SK_REG(port, RX_GMF_FL_MSK), GMR_FS_ANY_ERR); @@ -995,6 +995,10 @@ static int sky2_rx_start(struct sky2_port *sky2) sky2_rx_add(sky2, re->mapaddr); } + /* Truncate oversize frames */ + sky2_write16(hw, SK_REG(sky2->port, RX_GMF_TR_THR), sky2->rx_bufsize - 8); + sky2_write32(hw, SK_REG(sky2->port, RX_GMF_CTRL_T), RX_TRUNC_ON); + /* Tell chip about available buffers */ sky2_write16(hw, Y2_QADDR(rxq, PREF_UNIT_PUT_IDX), sky2->rx_put); sky2->rx_last_put = sky2_read16(hw, Y2_QADDR(rxq, PREF_UNIT_PUT_IDX)); @@ -1145,6 +1149,7 @@ static int sky2_xmit_frame(struct sk_buff *skb, struct net_device *dev) struct sky2_tx_le *le = NULL; struct tx_ring_info *re; unsigned i, len; + int avail; dma_addr_t mapping; u32 addr64; u16 mss; @@ -1287,12 +1292,16 @@ static int sky2_xmit_frame(struct sk_buff *skb, struct net_device *dev) re->idx = sky2->tx_prod; le->ctrl |= EOP; + avail = tx_avail(sky2); + if (mss != 0 || avail < TX_MIN_PENDING) { + le->ctrl |= FRC_STAT; + if (avail <= MAX_SKB_TX_LE) + netif_stop_queue(dev); + } + sky2_put_idx(hw, txqaddr[sky2->port], sky2->tx_prod, &sky2->tx_last_put, TX_RING_SIZE); - if (tx_avail(sky2) <= MAX_SKB_TX_LE) - netif_stop_queue(dev); - out_unlock: spin_unlock(&sky2->tx_lock); @@ -1707,10 +1716,12 @@ static void sky2_tx_timeout(struct net_device *dev) #define roundup(x, y) ((((x)+((y)-1))/(y))*(y)) -/* Want receive buffer size to be multiple of 64 bits, and incl room for vlan */ +/* Want receive buffer size to be multiple of 64 bits + * and incl room for vlan and truncation + */ static inline unsigned sky2_buf_size(int mtu) { - return roundup(mtu + ETH_HLEN + 4, 8); + return roundup(mtu + ETH_HLEN + VLAN_HLEN, 8) + 8; } static int sky2_change_mtu(struct net_device *dev, int new_mtu) @@ -1793,7 +1804,7 @@ static struct sk_buff *sky2_receive(struct sky2_port *sky2, if (!(status & GMR_FS_RX_OK)) goto resubmit; - if ((status >> 16) != length || length > sky2->rx_bufsize) + if (length > sky2->netdev->mtu + ETH_HLEN) goto oversize; if (length < copybreak) { @@ -3243,8 +3254,7 @@ static int __devinit sky2_probe(struct pci_dev *pdev, } } - err = request_irq(pdev->irq, sky2_intr, SA_SHIRQ | SA_SAMPLE_RANDOM, - DRV_NAME, hw); + err = request_irq(pdev->irq, sky2_intr, SA_SHIRQ, DRV_NAME, hw); if (err) { printk(KERN_ERR PFX "%s: cannot assign irq %d\n", pci_name(pdev), pdev->irq); diff --git a/drivers/net/tulip/de2104x.c b/drivers/net/tulip/de2104x.c index d7fb3ffe06a..2d0cfbceee2 100644 --- a/drivers/net/tulip/de2104x.c +++ b/drivers/net/tulip/de2104x.c @@ -1362,7 +1362,6 @@ static int de_open (struct net_device *dev) { struct de_private *de = dev->priv; int rc; - unsigned long flags; if (netif_msg_ifup(de)) printk(KERN_DEBUG "%s: enabling interface\n", dev->name); @@ -1376,18 +1375,20 @@ static int de_open (struct net_device *dev) return rc; } - rc = de_init_hw(de); - if (rc) { - printk(KERN_ERR "%s: h/w init failure, err=%d\n", - dev->name, rc); - goto err_out_free; - } + dw32(IntrMask, 0); rc = request_irq(dev->irq, de_interrupt, SA_SHIRQ, dev->name, dev); if (rc) { printk(KERN_ERR "%s: IRQ %d request failure, err=%d\n", dev->name, dev->irq, rc); - goto err_out_hw; + goto err_out_free; + } + + rc = de_init_hw(de); + if (rc) { + printk(KERN_ERR "%s: h/w init failure, err=%d\n", + dev->name, rc); + goto err_out_free_irq; } netif_start_queue(dev); @@ -1395,11 +1396,8 @@ static int de_open (struct net_device *dev) return 0; -err_out_hw: - spin_lock_irqsave(&de->lock, flags); - de_stop_hw(de); - spin_unlock_irqrestore(&de->lock, flags); - +err_out_free_irq: + free_irq(dev->irq, dev); err_out_free: de_free_rings(de); return rc; @@ -1455,6 +1453,8 @@ static void de_tx_timeout (struct net_device *dev) synchronize_irq(dev->irq); de_clean_rings(de); + de_init_rings(de); + de_init_hw(de); netif_wake_queue(dev); |