Merge tag 'mxs-dt-3.10' of git://git.linaro.org/people/shawnguo/linux-2.6 into next/dt2

From Shawn Guo <shawn.guo@linaro.org>:

The mxs device tree changes for 3.10:

* Move enet_out clk into device tree and have fec driver handle it.
* Convert mxsfb driver to generic display timings bindings, and remove
  the mxsfb auxdata from platform code.
* Add generic DMA device tree binding for mxs-dma, and convert the most
  of client device drivers to it.
* Change mxsfb driver to use regulator for controlling power of panel.
* A few device tree source updates

* tag 'mxs-dt-3.10' of git://git.linaro.org/people/shawnguo/linux-2.6: (23 commits)
  video: mxsfb: Introduce regulator support
  ARM: dts: cfa10036: Add touchscreen support to the CFA-10049
  ARM: dts: imx23-olinuxino: mark sdcard cd as broken
  serial: mxs-auart: move to use generic DMA helper
  mtd: gpmi: move to use generic DMA helper
  i2c: i2c-mxs: move to use generic DMA helper
  spi: mxs-spi: move to use generic DMA helper
  mmc: mxs-mmc: move to use generic DMA helper
  dma: mxs-dma: move to generic device tree binding
  dma: mxs-dma: use devm_* managed functions
  ARM: dts: add generic DMA device tree binding for mxs-dma
  pinctrl: pinctrl-mxs: document the missing pull-ups
  ARM: cfa10036: add one wire bitbanging to the cfa10049
  video: mxsfb: remove mxsfb_platform_data
  ARM: mxs: move display timing configurations into device tree
  video: mxsfb: get display timings from device tree
  video: mxsfb: remove dotclk_delay from platform_data
  video: mxsfb: remove fb_phys/fb_size from platform_data
  video: mxsfb: use devm_* managed functions
  ARM: mxs: remove unneeded enet_out clk initialization
  ...

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

32 files changed, 696 insertions, 644 deletions

diff --git a/Documentation/devicetree/bindings/dma/fsl-mxs-dma.txt b/Documentation/devicetree/bindings/dma/fsl-mxs-dma.txt
index ded0398d3bd..a4873e5e3e3 100644
--- a/Documentation/devicetree/bindings/dma/fsl-mxs-dma.txt
+++ b/Documentation/devicetree/bindings/dma/fsl-mxs-dma.txt
@@ -3,17 +3,58 @@
 Required properties:
 - compatible : Should be "fsl,<chip>-dma-apbh" or "fsl,<chip>-dma-apbx"
 - reg : Should contain registers location and length
+- interrupts : Should contain the interrupt numbers of DMA channels.
+  If a channel is empty/reserved, 0 should be filled in place.
+- #dma-cells : Must be <1>.  The number cell specifies the channel ID.
+- dma-channels : Number of channels supported by the DMA controller
+
+Optional properties:
+- interrupt-names : Name of DMA channel interrupts
 
 Supported chips:
 imx23, imx28.
 
 Examples:
-dma-apbh@80004000 {
+
+dma_apbh: dma-apbh@80004000 {
 	compatible = "fsl,imx28-dma-apbh";
-	reg = <0x80004000 2000>;
+	reg = <0x80004000 0x2000>;
+	interrupts = <82 83 84 85
+		      88 88 88 88
+		      88 88 88 88
+		      87 86 0 0>;
+	interrupt-names = "ssp0", "ssp1", "ssp2", "ssp3",
+			  "gpmi0", "gmpi1", "gpmi2", "gmpi3",
+			  "gpmi4", "gmpi5", "gpmi6", "gmpi7",
+			  "hsadc", "lcdif", "empty", "empty";
+	#dma-cells = <1>;
+	dma-channels = <16>;
 };
 
-dma-apbx@80024000 {
+dma_apbx: dma-apbx@80024000 {
 	compatible = "fsl,imx28-dma-apbx";
-	reg = <0x80024000 2000>;
+	reg = <0x80024000 0x2000>;
+	interrupts = <78 79 66 0
+		      80 81 68 69
+		      70 71 72 73
+		      74 75 76 77>;
+	interrupt-names = "auart4-rx", "aurat4-tx", "spdif-tx", "empty",
+			  "saif0", "saif1", "i2c0", "i2c1",
+			  "auart0-rx", "auart0-tx", "auart1-rx", "auart1-tx",
+			  "auart2-rx", "auart2-tx", "auart3-rx", "auart3-tx";
+	#dma-cells = <1>;
+	dma-channels = <16>;
+};
+
+DMA clients connected to the MXS DMA controller must use the format
+described in the dma.txt file.
+
+Examples:
+
+auart0: serial@8006a000 {
+	compatible = "fsl,imx28-auart", "fsl,imx23-auart";
+	reg = <0x8006a000 0x2000>;
+	interrupts = <112>;
+	dmas = <&dma_apbx 8>, <&dma_apbx 9>;
+	dma-names = "rx", "tx";
 };
diff --git a/Documentation/devicetree/bindings/fb/mxsfb.txt b/Documentation/devicetree/bindings/fb/mxsfb.txt
index b41e5e52a67..96ec5179c8a 100644
--- a/Documentation/devicetree/bindings/fb/mxsfb.txt
+++ b/Documentation/devicetree/bindings/fb/mxsfb.txt
@@ -5,9 +5,16 @@ Required properties:
   imx23 and imx28.
 - reg: Address and length of the register set for lcdif
 - interrupts: Should contain lcdif interrupts
+- display : phandle to display node (see below for details)
 
-Optional properties:
-- panel-enable-gpios : Should specify the gpio for panel enable
+* display node
+
+Required properties:
+- bits-per-pixel : <16> for RGB565, <32> for RGB888/666.
+- bus-width : number of data lines.  Could be <8>, <16>, <18> or <24>.
+
+Required sub-node:
+- display-timings : Refer to binding doc display-timing.txt for details.
 
 Examples:
 
@@ -15,5 +22,28 @@ lcdif@80030000 {
 	compatible = "fsl,imx28-lcdif";
 	reg = <0x80030000 2000>;
 	interrupts = <38 86>;
-	panel-enable-gpios = <&gpio3 30 0>;
+
+	display: display {
+		bits-per-pixel = <32>;
+		bus-width = <24>;
+
+		display-timings {
+			native-mode = <&timing0>;
+			timing0: timing0 {
+				clock-frequency = <33500000>;
+				hactive = <800>;
+				vactive = <480>;
+				hfront-porch = <164>;
+				hback-porch = <89>;
+				hsync-len = <10>;
+				vback-porch = <23>;
+				vfront-porch = <10>;
+				vsync-len = <10>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <0>;
+			};
+		};
+	};
 };
diff --git a/Documentation/devicetree/bindings/i2c/i2c-mxs.txt b/Documentation/devicetree/bindings/i2c/i2c-mxs.txt
index 7a3fe9e5f4c..4e1c8ac01eb 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-mxs.txt
+++ b/Documentation/devicetree/bindings/i2c/i2c-mxs.txt
@@ -3,10 +3,13 @@
 Required properties:
 - compatible: Should be "fsl,<chip>-i2c"
 - reg: Should contain registers location and length
-- interrupts: Should contain ERROR and DMA interrupts
+- interrupts: Should contain ERROR interrupt number
 - clock-frequency: Desired I2C bus clock frequency in Hz.
                    Only 100000Hz and 400000Hz modes are supported.
-- fsl,i2c-dma-channel: APBX DMA channel for the I2C
+- dmas: DMA specifier, consisting of a phandle to DMA controller node
+  and I2C DMA channel ID.
+  Refer to dma.txt and fsl-mxs-dma.txt for details.
+- dma-names: Must be "rx-tx".
 
 Examples:
 
@@ -15,7 +18,8 @@ i2c0: i2c@80058000 {
 	#size-cells = <0>;
 	compatible = "fsl,imx28-i2c";
 	reg = <0x80058000 2000>;
-	interrupts = <111 68>;
+	interrupts = <111>;
 	clock-frequency = <100000>;
-	fsl,i2c-dma-channel = <6>;
+	dmas = <&dma_apbx 6>;
+	dma-names = "rx-tx";
 };
diff --git a/Documentation/devicetree/bindings/mmc/mxs-mmc.txt b/Documentation/devicetree/bindings/mmc/mxs-mmc.txt
index 54949f6faed..515addc2007 100644
--- a/Documentation/devicetree/bindings/mmc/mxs-mmc.txt
+++ b/Documentation/devicetree/bindings/mmc/mxs-mmc.txt
@@ -9,15 +9,19 @@ and the properties used by the mxsmmc driver.
 Required properties:
 - compatible: Should be "fsl,<chip>-mmc".  The supported chips include
   imx23 and imx28.
-- interrupts: Should contain ERROR and DMA interrupts
-- fsl,ssp-dma-channel: APBH DMA channel for the SSP
+- interrupts: Should contain ERROR interrupt number
+- dmas: DMA specifier, consisting of a phandle to DMA controller node
+  and SSP DMA channel ID.
+  Refer to dma.txt and fsl-mxs-dma.txt for details.
+- dma-names: Must be "rx-tx".
 
 Examples:
 
 ssp0: ssp@80010000 {
 	compatible = "fsl,imx28-mmc";
 	reg = <0x80010000 2000>;
-	interrupts = <96 82>;
-	fsl,ssp-dma-channel = <0>;
+	interrupts = <96>;
+	dmas = <&dma_apbh 0>;
+	dma-names = "rx-tx";
 	bus-width = <8>;
 };
diff --git a/Documentation/devicetree/bindings/mtd/gpmi-nand.txt b/Documentation/devicetree/bindings/mtd/gpmi-nand.txt
index 3fb3f901536..551b2a179d0 100644
--- a/Documentation/devicetree/bindings/mtd/gpmi-nand.txt
+++ b/Documentation/devicetree/bindings/mtd/gpmi-nand.txt
@@ -7,10 +7,12 @@ Required properties:
   - compatible : should be "fsl,<chip>-gpmi-nand"
   - reg : should contain registers location and length for gpmi and bch.
   - reg-names: Should contain the reg names "gpmi-nand" and "bch"
-  - interrupts : The first is the DMA interrupt number for GPMI.
-                 The second is the BCH interrupt number.
-  - interrupt-names : The interrupt names "gpmi-dma", "bch";
-  - fsl,gpmi-dma-channel : Should contain the dma channel it uses.
+  - interrupts : BCH interrupt number.
+  - interrupt-names : Should be "bch".
+  - dmas: DMA specifier, consisting of a phandle to DMA controller node
+    and GPMI DMA channel ID.
+    Refer to dma.txt and fsl-mxs-dma.txt for details.
+  - dma-names: Must be "rx-tx".
 
 Optional properties:
   - nand-on-flash-bbt: boolean to enable on flash bbt option if not
@@ -27,9 +29,10 @@ gpmi-nand@8000c000 {
 	#size-cells = <1>;
 	reg = <0x8000c000 2000>, <0x8000a000 2000>;
 	reg-names = "gpmi-nand", "bch";
-	interrupts = <88>, <41>;
-	interrupt-names = "gpmi-dma", "bch";
-	fsl,gpmi-dma-channel = <4>;
+	interrupts = <41>;
+	interrupt-names = "bch";
+	dmas = <&dma_apbh 4>;
+	dma-names = "rx-tx";
 
 	partition@0 {
 	...
diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,mxs-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/fsl,mxs-pinctrl.txt
index f7e8e8f4d9a..3077370c89a 100644
--- a/Documentation/devicetree/bindings/pinctrl/fsl,mxs-pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/fsl,mxs-pinctrl.txt
@@ -70,6 +70,10 @@ Optional subnode-properties:
     0: Disable the internal pull-up
     1: Enable the internal pull-up
 
+Note that when enabling the pull-up, the internal pad keeper gets disabled.
+Also, some pins doesn't have a pull up, in that case, setting the fsl,pull-up
+will only disable the internal pad keeper.
+
 Examples:
 
 pinctrl@80018000 {
diff --git a/Documentation/devicetree/bindings/spi/mxs-spi.txt b/Documentation/devicetree/bindings/spi/mxs-spi.txt
index e2e13957c2a..3499b73293c 100644
--- a/Documentation/devicetree/bindings/spi/mxs-spi.txt
+++ b/Documentation/devicetree/bindings/spi/mxs-spi.txt
@@ -3,8 +3,11 @@
 Required properties:
 - compatible: Should be "fsl,<soc>-spi", where soc is "imx23" or "imx28"
 - reg: Offset and length of the register set for the device
-- interrupts: Should contain SSP interrupts (error irq first, dma irq second)
-- fsl,ssp-dma-channel: APBX DMA channel for the SSP
+- interrupts: Should contain SSP ERROR interrupt
+- dmas: DMA specifier, consisting of a phandle to DMA controller node
+  and SSP DMA channel ID.
+  Refer to dma.txt and fsl-mxs-dma.txt for details.
+- dma-names: Must be "rx-tx".
 
 Optional properties:
 - clock-frequency : Input clock frequency to the SPI block in Hz.
@@ -17,6 +20,7 @@ ssp0: ssp@80010000 {
 	#size-cells = <0>;
 	compatible = "fsl,imx28-spi";
 	reg = <0x80010000 0x2000>;
-	interrupts = <96 82>;
-	fsl,ssp-dma-channel = <0>;
+	interrupts = <96>;
+	dmas = <&dma_apbh 0>;
+	dma-names = "rx-tx";
 };
diff --git a/Documentation/devicetree/bindings/tty/serial/fsl-mxs-auart.txt b/Documentation/devicetree/bindings/tty/serial/fsl-mxs-auart.txt
index 273a8d5b330..2c00ec64628 100644
--- a/Documentation/devicetree/bindings/tty/serial/fsl-mxs-auart.txt
+++ b/Documentation/devicetree/bindings/tty/serial/fsl-mxs-auart.txt
@@ -5,20 +5,18 @@ Required properties:
   imx23 and imx28.
 - reg : Address and length of the register set for the device
 - interrupts : Should contain the auart interrupt numbers
-
-Optional properties:
-- fsl,auart-dma-channel : The DMA channels, the first is for RX, the other
-		is for TX. If you add this property, it also means that you
-		will enable the DMA support for the auart.
-		Note: due to the hardware bug in imx23(see errata : 2836),
-		only the imx28 can enable the DMA support for the auart.
+- dmas: DMA specifier, consisting of a phandle to DMA controller node
+  and AUART DMA channel ID.
+  Refer to dma.txt and fsl-mxs-dma.txt for details.
+- dma-names: "rx" for RX channel, "tx" for TX channel.
 
 Example:
 auart0: serial@8006a000 {
 	compatible = "fsl,imx28-auart", "fsl,imx23-auart";
 	reg = <0x8006a000 0x2000>;
-	interrupts = <112 70 71>;
-	fsl,auart-dma-channel = <8 9>;
+	interrupts = <112>;
+	dmas = <&dma_apbx 8>, <&dma_apbx 9>;
+	dma-names = "rx", "tx";
 };
 
 Note: Each auart port should have an alias correctly numbered in "aliases"
diff --git a/arch/arm/boot/dts/imx23-evk.dts b/arch/arm/boot/dts/imx23-evk.dts
index 035c13f9d3c..da0588a0413 100644
--- a/arch/arm/boot/dts/imx23-evk.dts
+++ b/arch/arm/boot/dts/imx23-evk.dts
@@ -59,8 +59,33 @@
 			lcdif@80030000 {
 				pinctrl-names = "default";
 				pinctrl-0 = <&lcdif_24bit_pins_a>;
-				panel-enable-gpios = <&gpio1 18 0>;
+				lcd-supply = <&reg_lcd_3v3>;
+				display = <&display>;
 				status = "okay";
+
+				display: display {
+					bits-per-pixel = <32>;
+					bus-width = <24>;
+
+					display-timings {
+						native-mode = <&timing0>;
+						timing0: timing0 {
+							clock-frequency = <9200000>;
+							hactive = <480>;
+							vactive = <272>;
+							hback-porch = <15>;
+							hfront-porch = <8>;
+							vback-porch = <12>;
+							vfront-porch = <4>;
+							hsync-len = <1>;
+							vsync-len = <1>;
+							hsync-active = <0>;
+							vsync-active = <0>;
+							de-active = <1>;
+							pixelclk-active = <0>;
+						};
+					};
+				};
 			};
 		};
 
@@ -95,6 +120,15 @@
 			regulator-max-microvolt = <3300000>;
 			gpio = <&gpio1 29 0>;
 		};
+
+		reg_lcd_3v3: lcd-3v3 {
+			compatible = "regulator-fixed";
+			regulator-name = "lcd-3v3";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			gpio = <&gpio1 18 0>;
+			enable-active-high;
+		};
 	};
 
 	backlight {
diff --git a/arch/arm/boot/dts/imx23-olinuxino.dts b/arch/arm/boot/dts/imx23-olinuxino.dts
index e7484e4ea65..d107c4af321 100644
--- a/arch/arm/boot/dts/imx23-olinuxino.dts
+++ b/arch/arm/boot/dts/imx23-olinuxino.dts
@@ -29,6 +29,7 @@
 				pinctrl-names = "default";
 				pinctrl-0 = <&mmc0_4bit_pins_a &mmc0_pins_fixup>;
 				bus-width = <4>;
+				broken-cd;
 				status = "okay";
 			};
 
diff --git a/arch/arm/boot/dts/imx23.dtsi b/arch/arm/boot/dts/imx23.dtsi
index ad2d79324cd..73fd7d0887b 100644
--- a/arch/arm/boot/dts/imx23.dtsi
+++ b/arch/arm/boot/dts/imx23.dtsi
@@ -49,9 +49,15 @@
 				reg = <0x80000000 0x2000>;
 			};
 
-			dma-apbh@80004000 {
+			dma_apbh: dma-apbh@80004000 {
 				compatible = "fsl,imx23-dma-apbh";
 				reg = <0x80004000 0x2000>;
+				interrupts = <0 14 20 0
+					      13 13 13 13>;
+				interrupt-names = "empty", "ssp0", "ssp1", "empty",
+						  "gpmi0", "gpmi1", "gpmi2", "gpmi3";
+				#dma-cells = <1>;
+				dma-channels = <8>;
 				clocks = <&clks 15>;
 			};
 
@@ -70,6 +76,8 @@
 				interrupt-names = "gpmi-dma", "bch";
 				clocks = <&clks 34>;
 				clock-names = "gpmi_io";
+				dmas = <&dma_apbh 4>;
+				dma-names = "rx-tx";
 				fsl,gpmi-dma-channel = <4>;
 				status = "disabled";
 			};
@@ -78,6 +86,8 @@
 				reg = <0x80010000 0x2000>;
 				interrupts = <15 14>;
 				clocks = <&clks 33>;
+				dmas = <&dma_apbh 1>;
+				dma-names = "rx-tx";
 				fsl,ssp-dma-channel = <1>;
 				status = "disabled";
 			};
@@ -305,9 +315,19 @@
 				status = "disabled";
 			};
 
-			dma-apbx@80024000 {
+			dma_apbx: dma-apbx@80024000 {
 				compatible = "fsl,imx23-dma-apbx";
 				reg = <0x80024000 0x2000>;
+				interrupts = <7 5 9 26
+					      19 0 25 23
+					      60 58 9 0
+					      0 0 0 0>;
+				interrupt-names = "audio-adc", "audio-dac", "spdif-tx", "i2c",
+						  "saif0", "empty", "auart0-rx", "auart0-tx",
+						  "auart1-rx", "auart1-tx", "saif1", "empty",
+						  "empty", "empty", "empty", "empty";
+				#dma-cells = <1>;
+				dma-channels = <16>;
 				clocks = <&clks 16>;
 			};
 
@@ -344,6 +364,8 @@
 				reg = <0x80034000 0x2000>;
 				interrupts = <2 20>;
 				clocks = <&clks 33>;
+				dmas = <&dma_apbh 2>;
+				dma-names = "rx-tx";
 				fsl,ssp-dma-channel = <2>;
 				status = "disabled";
 			};
@@ -369,6 +391,8 @@
 
 			saif0: saif@80042000 {
 				reg = <0x80042000 0x2000>;
+				dmas = <&dma_apbx 4>;
+				dma-names = "rx-tx";
 				status = "disabled";
 			};
 
@@ -379,16 +403,22 @@
 
 			saif1: saif@80046000 {
 				reg = <0x80046000 0x2000>;
+				dmas = <&dma_apbx 10>;
+				dma-names = "rx-tx";
 				status = "disabled";
 			};
 
 			audio-out@80048000 {
 				reg = <0x80048000 0x2000>;
+				dmas = <&dma_apbx 1>;
+				dma-names = "tx";
 				status = "disabled";
 			};
 
 			audio-in@8004c000 {
 				reg = <0x8004c000 0x2000>;
+				dmas = <&dma_apbx 0>;
+				dma-names = "rx";
 				status = "disabled";
 			};
 
@@ -401,11 +431,15 @@
 
 			spdif@80054000 {
 				reg = <0x80054000 2000>;
+				dmas = <&dma_apbx 2>;
+				dma-names = "tx";
 				status = "disabled";
 			};
 
 			i2c@80058000 {
 				reg = <0x80058000 0x2000>;
+				dmas = <&dma_apbx 3>;
+				dma-names = "rx-tx";
 				status = "disabled";
 			};
 
@@ -436,6 +470,8 @@
 				reg = <0x8006c000 0x2000>;
 				interrupts = <24 25 23>;
 				clocks = <&clks 32>;
+				dmas = <&dma_apbx 6>, <&dma_apbx 7>;
+				dma-names = "rx", "tx";
 				status = "disabled";
 			};
 
@@ -444,6 +480,8 @@
 				reg = <0x8006e000 0x2000>;
 				interrupts = <59 60 58>;
 				clocks = <&clks 32>;
+				dmas = <&dma_apbx 8>, <&dma_apbx 9>;
+				dma-names = "rx", "tx";
 				status = "disabled";
 			};
 
diff --git a/arch/arm/boot/dts/imx28-apf28dev.dts b/arch/arm/boot/dts/imx28-apf28dev.dts
index 6d8865bfb4b..3d905d16cbe 100644
--- a/arch/arm/boot/dts/imx28-apf28dev.dts
+++ b/arch/arm/boot/dts/imx28-apf28dev.dts
@@ -72,7 +72,32 @@
 				pinctrl-names = "default";
 				pinctrl-0 = <&lcdif_16bit_pins_a
 						&lcdif_pins_apf28dev>;
+				display = <&display>;
 				status = "okay";
+
+				display: display {
+					bits-per-pixel = <16>;
+					bus-width = <16>;
+
+					display-timings {
+						native-mode = <&timing0>;
+						timing0: timing0 {
+							clock-frequency = <33000033>;
+							hactive = <800>;
+							vactive = <480>;
+							hback-porch = <96>;
+							hfront-porch = <96>;
+							vback-porch = <20>;
+							vfront-porch = <21>;
+							hsync-len = <64>;
+							vsync-len = <4>;
+							hsync-active = <1>;
+							vsync-active = <1>;
+							de-active = <1>;
+							pixelclk-active = <0>;
+						};
+					};
+				};
 			};
 		};
 
diff --git a/arch/arm/boot/dts/imx28-apx4devkit.dts b/arch/arm/boot/dts/imx28-apx4devkit.dts
index 5171667a776..43bf3c796cb 100644
--- a/arch/arm/boot/dts/imx28-apx4devkit.dts
+++ b/arch/arm/boot/dts/imx28-apx4devkit.dts
@@ -94,7 +94,32 @@
 				pinctrl-names = "default";
 				pinctrl-0 = <&lcdif_24bit_pins_a
 					     &lcdif_pins_apx4>;
+				display = <&display>;
 				status = "okay";
+
+				display: display {
+					bits-per-pixel = <32>;
+					bus-width = <24>;
+
+					display-timings {
+						native-mode = <&timing0>;
+						timing0: timing0 {
+							clock-frequency = <30000000>;
+							hactive = <800>;
+							vactive = <480>;
+							hback-porch = <88>;
+							hfront-porch = <40>;
+							vback-porch = <32>;
+							vfront-porch = <13>;
+							hsync-len = <48>;
+							vsync-len = <3>;
+							hsync-active = <1>;
+							vsync-active = <1>;
+							de-active = <1>;
+							pixelclk-active = <0>;
+						};
+					};
+				};
 			};
 		};
 
diff --git a/arch/arm/boot/dts/imx28-cfa10049.dts b/arch/arm/boot/dts/imx28-cfa10049.dts
index a0d3e9f1738..063e6205989 100644
--- a/arch/arm/boot/dts/imx28-cfa10049.dts
+++ b/arch/arm/boot/dts/imx28-cfa10049.dts
@@ -30,7 +30,6 @@
 					reg = <0>;
 					fsl,pinmux-ids = <
 						0x0073 /* MX28_PAD_GPMI_D7__GPIO_0_7 */
-						0x1153 /* MX28_PAD_LCD_D22__GPIO_1_21 */
 						0x1163 /* MX28_PAD_LCD_D22__GPIO_1_22 */
 						0x1173 /* MX28_PAD_LCD_D22__GPIO_1_23 */
 						0x2153 /* MX28_PAD_SSP2_D5__GPIO_2_21 */
@@ -120,13 +119,48 @@
 					fsl,voltage = <1>;
 					fsl,pull-up = <0>;
 				};
+
+				w1_gpio_pins: w1-gpio@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						0x1153 /* MX28_PAD_LCD_D21__GPIO_1_21 */
+					>;
+					fsl,drive-strength = <1>;
+					fsl,voltage = <1>;
+					fsl,pull-up = <0>; /* 0 will enable the keeper */
+				};
 			};
 
 			lcdif@80030000 {
 				pinctrl-names = "default";
 				pinctrl-0 = <&lcdif_18bit_pins_cfa10049
 					     &lcdif_pins_cfa10049>;
+				display = <&display>;
 				status = "okay";
+
+				display: display {
+					bits-per-pixel = <32>;
+					bus-width = <18>;
+
+					display-timings {
+						native-mode = <&timing0>;
+						timing0: timing0 {
+							clock-frequency = <9216000>;
+							hactive = <320>;
+							vactive = <480>;
+							hback-porch = <2>;
+							hfront-porch = <2>;
+							vback-porch = <2>;
+							vfront-porch = <2>;
+							hsync-len = <15>;
+							vsync-len = <15>;
+							hsync-active = <0>;
+							vsync-active = <0>;
+							de-active = <1>;
+							pixelclk-active = <1>;
+						};
+					};
+				};
 			};
 		};
 
@@ -183,6 +217,11 @@
 			usbphy1: usbphy@8007e000 {
 				status = "okay";
 			};
+
+			lradc@80050000 {
+				status = "okay";
+				fsl,lradc-touchscreen-wires = <4>;
+			};
 		};
 	};
 
@@ -304,5 +343,14 @@
 		pwms = <&pwm 3 5000000>;
 		brightness-levels = <0 4 8 16 32 64 128 255>;
 		default-brightness-level = <6>;
+
+	};
+
+	onewire@0 {
+		compatible = "w1-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&w1_gpio_pins>;
+		status = "okay";
+		gpios = <&gpio1 21 0>;
 	};
 };
diff --git a/arch/arm/boot/dts/imx28-evk.dts b/arch/arm/boot/dts/imx28-evk.dts
index 2da316e0440..3637bf3b1d5 100644
--- a/arch/arm/boot/dts/imx28-evk.dts
+++ b/arch/arm/boot/dts/imx28-evk.dts
@@ -123,8 +123,33 @@
 				pinctrl-names = "default";
 				pinctrl-0 = <&lcdif_24bit_pins_a
 					     &lcdif_pins_evk>;
-				panel-enable-gpios = <&gpio3 30 0>;
+				lcd-supply = <&reg_lcd_3v3>;
+				display = <&display>;
 				status = "okay";
+
+				display: display {
+					bits-per-pixel = <32>;
+					bus-width = <24>;
+
+					display-timings {
+						native-mode = <&timing0>;
+						timing0: timing0 {
+							clock-frequency = <33500000>;
+							hactive = <800>;
+							vactive = <480>;
+							hback-porch = <89>;
+							hfront-porch = <164>;
+							vback-porch = <23>;
+							vfront-porch = <10>;
+							hsync-len = <10>;
+							vsync-len = <10>;
+							hsync-active = <0>;
+							vsync-active = <0>;
+							de-active = <1>;
+							pixelclk-active = <0>;
+						};
+					};
+				};
 			};
 
 			can0: can@80032000 {
@@ -285,6 +310,15 @@
 			gpio = <&gpio3 8 0>;
 			enable-active-high;
 		};
+
+		reg_lcd_3v3: lcd-3v3 {
+			compatible = "regulator-fixed";
+			regulator-name = "lcd-3v3";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			gpio = <&gpio3 30 0>;
+			enable-active-high;
+		};
 	};
 
 	sound {
diff --git a/arch/arm/boot/dts/imx28-m28evk.dts b/arch/arm/boot/dts/imx28-m28evk.dts
index 6ce3d17c3a2..5f0ba99aa80 100644
--- a/arch/arm/boot/dts/imx28-m28evk.dts
+++ b/arch/arm/boot/dts/imx28-m28evk.dts
@@ -119,7 +119,32 @@
 				pinctrl-names = "default";
 				pinctrl-0 = <&lcdif_24bit_pins_a
 					     &lcdif_pins_m28>;
+				display = <&display>;
 				status = "okay";
+
+				display: display {
+					bits-per-pixel = <16>;
+					bus-width = <18>;
+
+					display-timings {
+						native-mode = <&timing0>;
+						timing0: timing0 {
+							clock-frequency = <33260000>;
+							hactive = <800>;
+							vactive = <480>;
+							hback-porch = <0>;
+							hfront-porch = <256>;
+							vback-porch = <0>;
+							vfront-porch = <45>;
+							hsync-len = <1>;
+							vsync-len = <1>;
+							hsync-active = <0>;
+							vsync-active = <0>;
+							de-active = <1>;
+							pixelclk-active = <1>;
+						};
+					};
+				};
 			};
 
 			can0: can@80032000 {
@@ -221,6 +246,8 @@
 			phy-mode = "rmii";
 			pinctrl-names = "default";
 			pinctrl-0 = <&mac0_pins_a>;
+			clocks = <&clks 57>, <&clks 57>;
+			clock-names = "ipg", "ahb";
 			status = "okay";
 		};
 
diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi
index 64af2381c1b..600f7cb51f3 100644
--- a/arch/arm/boot/dts/imx28.dtsi
+++ b/arch/arm/boot/dts/imx28.dtsi
@@ -61,12 +61,24 @@
 			hsadc@80002000 {
 				reg = <0x80002000 0x2000>;
 				interrupts = <13 87>;
+				dmas = <&dma_apbh 12>;
+				dma-names = "rx";
 				status = "disabled";
 			};
 
-			dma-apbh@80004000 {
+			dma_apbh: dma-apbh@80004000 {
 				compatible = "fsl,imx28-dma-apbh";
 				reg = <0x80004000 0x2000>;
+				interrupts = <82 83 84 85
+					      88 88 88 88
+					      88 88 88 88
+					      87 86 0 0>;
+				interrupt-names = "ssp0", "ssp1", "ssp2", "ssp3",
+						  "gpmi0", "gmpi1", "gpmi2", "gmpi3",
+						  "gpmi4", "gmpi5", "gpmi6", "gmpi7",
+						  "hsadc", "lcdif", "empty", "empty";
+				#dma-cells = <1>;
+				dma-channels = <16>;
 				clocks = <&clks 25>;
 			};
 
@@ -86,6 +98,8 @@
 				interrupt-names = "gpmi-dma", "bch";
 				clocks = <&clks 50>;
 				clock-names = "gpmi_io";
+				dmas = <&dma_apbh 4>;
+				dma-names = "rx-tx";
 				fsl,gpmi-dma-channel = <4>;
 				status = "disabled";
 			};
@@ -96,6 +110,8 @@
 				reg = <0x80010000 0x2000>;
 				interrupts = <96 82>;
 				clocks = <&clks 46>;
+				dmas = <&dma_apbh 0>;
+				dma-names = "rx-tx";
 				fsl,ssp-dma-channel = <0>;
 				status = "disabled";
 			};
@@ -106,6 +122,8 @@
 				reg = <0x80012000 0x2000>;
 				interrupts = <97 83>;
 				clocks = <&clks 47>;
+				dmas = <&dma_apbh 1>;
+				dma-names = "rx-tx";
 				fsl,ssp-dma-channel = <1>;
 				status = "disabled";
 			};
@@ -116,6 +134,8 @@
 				reg = <0x80014000 0x2000>;
 				interrupts = <98 84>;
 				clocks = <&clks 48>;
+				dmas = <&dma_apbh 2>;
+				dma-names = "rx-tx";
 				fsl,ssp-dma-channel = <2>;
 				status = "disabled";
 			};
@@ -126,6 +146,8 @@
 				reg = <0x80016000 0x2000>;
 				interrupts = <99 85>;
 				clocks = <&clks 49>;
+				dmas = <&dma_apbh 3>;
+				dma-names = "rx-tx";
 				fsl,ssp-dma-channel = <3>;
 				status = "disabled";
 			};
@@ -658,9 +680,19 @@
 				status = "disabled";
 			};
 
-			dma-apbx@80024000 {
+			dma_apbx: dma-apbx@80024000 {
 				compatible = "fsl,imx28-dma-apbx";
 				reg = <0x80024000 0x2000>;
+				interrupts = <78 79 66 0
+					      80 81 68 69
+					      70 71 72 73
+					      74 75 76 77>;
+				interrupt-names = "auart4-rx", "aurat4-tx", "spdif-tx", "empty",
+						  "saif0", "saif1", "i2c0", "i2c1",
+						  "auart0-rx", "auart0-tx", "auart1-rx", "auart1-tx",
+						  "auart2-rx", "auart2-tx", "auart3-rx", "auart3-tx";
+				#dma-cells = <1>;
+				dma-channels = <16>;
 				clocks = <&clks 26>;
 			};
 
@@ -692,6 +724,8 @@
 				reg = <0x80030000 0x2000>;
 				interrupts = <38 86>;
 				clocks = <&clks 55>;
+				dmas = <&dma_apbh 13>;
+				dma-names = "rx";
 				status = "disabled";
 			};
 
@@ -767,6 +801,8 @@
 				reg = <0x80042000 0x2000>;
 				interrupts = <59 80>;
 				clocks = <&clks 53>;
+				dmas = <&dma_apbx 4>;
+				dma-names = "rx-tx";
 				fsl,saif-dma-channel = <4>;
 				status = "disabled";
 			};
@@ -781,6 +817,8 @@
 				reg = <0x80046000 0x2000>;
 				interrupts = <58 81>;
 				clocks = <&clks 54>;
+				dmas = <&dma_apbx 5>;
+				dma-names = "rx-tx";
 				fsl,saif-dma-channel = <5>;
 				status = "disabled";
 			};
@@ -796,6 +834,8 @@
 			spdif@80054000 {
 				reg = <0x80054000 0x2000>;
 				interrupts = <45 66>;
+				dmas = <&dma_apbx 2>;
+				dma-names = "tx";
 				status = "disabled";
 			};
 
@@ -812,6 +852,8 @@
 				reg = <0x80058000 0x2000>;
 				interrupts = <111 68>;
 				clock-frequency = <100000>;
+				dmas = <&dma_apbx 6>;
+				dma-names = "rx-tx";
 				fsl,i2c-dma-channel = <6>;
 				status = "disabled";
 			};
@@ -823,6 +865,8 @@
 				reg = <0x8005a000 0x2000>;
 				interrupts = <110 69>;
 				clock-frequency = <100000>;
+				dmas = <&dma_apbx 7>;
+				dma-names = "rx-tx";
 				fsl,i2c-dma-channel = <7>;
 				status = "disabled";
 			};
@@ -847,6 +891,8 @@
 				compatible = "fsl,imx28-auart", "fsl,imx23-auart";
 				reg = <0x8006a000 0x2000>;
 				interrupts = <112 70 71>;
+				dmas = <&dma_apbx 8>, <&dma_apbx 9>;
+				dma-names = "rx", "tx";
 				fsl,auart-dma-channel = <8 9>;
 				clocks = <&clks 45>;
 				status = "disabled";
@@ -856,6 +902,8 @@
 				compatible = "fsl,imx28-auart", "fsl,imx23-auart";
 				reg = <0x8006c000 0x2000>;
 				interrupts = <113 72 73>;
+				dmas = <&dma_apbx 10>, <&dma_apbx 11>;
+				dma-names = "rx", "tx";
 				clocks = <&clks 45>;
 				status = "disabled";
 			};
@@ -864,6 +912,8 @@
 				compatible = "fsl,imx28-auart", "fsl,imx23-auart";
 				reg = <0x8006e000 0x2000>;
 				interrupts = <114 74 75>;
+				dmas = <&dma_apbx 12>, <&dma_apbx 13>;
+				dma-names = "rx", "tx";
 				clocks = <&clks 45>;
 				status = "disabled";
 			};
@@ -872,6 +922,8 @@
 				compatible = "fsl,imx28-auart", "fsl,imx23-auart";
 				reg = <0x80070000 0x2000>;
 				interrupts = <115 76 77>;
+				dmas = <&dma_apbx 14>, <&dma_apbx 15>;
+				dma-names = "rx", "tx";
 				clocks = <&clks 45>;
 				status = "disabled";
 			};
@@ -880,6 +932,8 @@
 				compatible = "fsl,imx28-auart", "fsl,imx23-auart";
 				reg = <0x80072000 0x2000>;
 				interrupts = <116 78 79>;
+				dmas = <&dma_apbx 0>, <&dma_apbx 1>;
+				dma-names = "rx", "tx";
 				clocks = <&clks 45>;
 				status = "disabled";
 			};
@@ -943,8 +997,8 @@
 			compatible = "fsl,imx28-fec";
 			reg = <0x800f0000 0x4000>;
 			interrupts = <101>;
-			clocks = <&clks 57>, <&clks 57>;
-			clock-names = "ipg", "ahb";
+			clocks = <&clks 57>, <&clks 57>, <&clks 64>;
+			clock-names = "ipg", "ahb", "enet_out";
 			status = "disabled";
 		};
 
diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi
index 06ec460b458..59e970f74e8 100644
--- a/arch/arm/boot/dts/imx6qdl.dtsi
+++ b/arch/arm/boot/dts/imx6qdl.dtsi
@@ -65,9 +65,13 @@
 		interrupt-parent = <&intc>;
 		ranges;
 
-		dma-apbh@00110000 {
+		dma_apbh: dma-apbh@00110000 {
 			compatible = "fsl,imx6q-dma-apbh", "fsl,imx28-dma-apbh";
 			reg = <0x00110000 0x2000>;
+			interrupts = <0 13 0x04>, <0 13 0x04>, <0 13 0x04>, <0 13 0x04>;
+			interrupt-names = "gpmi0", "gpmi1", "gpmi2", "gpmi3";
+			#dma-cells = <1>;
+			dma-channels = <4>;
 			clocks = <&clks 106>;
 		};
 
@@ -83,6 +87,8 @@
 				 <&clks 150>, <&clks 149>;
 			clock-names = "gpmi_io", "gpmi_apb", "gpmi_bch",
 				      "gpmi_bch_apb", "per1_bch";
+			dmas = <&dma_apbh 0>;
+			dma-names = "rx-tx";
 			fsl,gpmi-dma-channel = <0>;
 			status = "disabled";
 		};
diff --git a/arch/arm/mach-mxs/mach-mxs.c b/arch/arm/mach-mxs/mach-mxs.c
index 16870bf853b..f39ab808694 100644
--- a/arch/arm/mach-mxs/mach-mxs.c
+++ b/arch/arm/mach-mxs/mach-mxs.c
@@ -22,7 +22,6 @@
 #include <linux/irqchip.h>
 #include <linux/irqchip/mxs.h>
 #include <linux/micrel_phy.h>
-#include <linux/mxsfb.h>
 #include <linux/of_address.h>
 #include <linux/of_platform.h>
 #include <linux/phy.h>
@@ -59,106 +58,6 @@ static inline void __mxs_togl(u32 mask, void __iomem *reg)
 	__raw_writel(mask, reg + MXS_TOG_ADDR);
 }
 
-static struct fb_videomode mx23evk_video_modes[] = {
-	{
-		.name		= "Samsung-LMS430HF02",
-		.refresh	= 60,
-		.xres		= 480,
-		.yres		= 272,
-		.pixclock	= 108096, /* picosecond (9.2 MHz) */
-		.left_margin	= 15,
-		.right_margin	= 8,
-		.upper_margin	= 12,
-		.lower_margin	= 4,
-		.hsync_len	= 1,
-		.vsync_len	= 1,
-	},
-};
-
-static struct fb_videomode mx28evk_video_modes[] = {
-	{
-		.name		= "Seiko-43WVF1G",
-		.refresh	= 60,
-		.xres		= 800,
-		.yres		= 480,
-		.pixclock	= 29851, /* picosecond (33.5 MHz) */
-		.left_margin	= 89,
-		.right_margin	= 164,
-		.upper_margin	= 23,
-		.lower_margin	= 10,
-		.hsync_len	= 10,
-		.vsync_len	= 10,
-	},
-};
-
-static struct fb_videomode m28evk_video_modes[] = {
-	{
-		.name		= "Ampire AM-800480R2TMQW-T01H",
-		.refresh	= 60,
-		.xres		= 800,
-		.yres		= 480,
-		.pixclock	= 30066, /* picosecond (33.26 MHz) */
-		.left_margin	= 0,
-		.right_margin	= 256,
-		.upper_margin	= 0,
-		.lower_margin	= 45,
-		.hsync_len	= 1,
-		.vsync_len	= 1,
-	},
-};
-
-static struct fb_videomode apx4devkit_video_modes[] = {
-	{
-		.name		= "HannStar PJ70112A",
-		.refresh	= 60,
-		.xres		= 800,
-		.yres		= 480,
-		.pixclock	= 33333, /* picosecond (30.00 MHz) */
-		.left_margin	= 88,
-		.right_margin	= 40,
-		.upper_margin	= 32,
-		.lower_margin	= 13,
-		.hsync_len	= 48,
-		.vsync_len	= 3,
-		.sync		= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-	},
-};
-
-static struct fb_videomode apf28dev_video_modes[] = {
-	{
-		.name = "LW700",
-		.refresh = 60,
-		.xres = 800,
-		.yres = 480,
-		.pixclock = 30303, /* picosecond */
-		.left_margin = 96,
-		.right_margin = 96, /* at least 3 & 1 */
-		.upper_margin = 0x14,
-		.lower_margin = 0x15,
-		.hsync_len = 64,
-		.vsync_len = 4,
-		.sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-	},
-};
-
-static struct fb_videomode cfa10049_video_modes[] = {
-	{
-		.name		= "Himax HX8357-B",
-		.refresh	= 60,
-		.xres		= 320,
-		.yres		= 480,
-		.pixclock	= 108506, /* picosecond (9.216 MHz) */
-		.left_margin	= 2,
-		.right_margin	= 2,
-		.upper_margin	= 2,
-		.lower_margin	= 2,
-		.hsync_len	= 15,
-		.vsync_len	= 15,
-	},
-};
-
-static struct mxsfb_platform_data mxsfb_pdata __initdata;
-
 /*
  * MX28EVK_FLEXCAN_SWITCH is shared between both flexcan controllers
  */
@@ -189,8 +88,6 @@ static void mx28evk_flexcan1_switch(int enable)
 static struct flexcan_platform_data flexcan_pdata[2];
 
 static struct of_dev_auxdata mxs_auxdata_lookup[] __initdata = {
-	OF_DEV_AUXDATA("fsl,imx23-lcdif", 0x80030000, NULL, &mxsfb_pdata),
-	OF_DEV_AUXDATA("fsl,imx28-lcdif", 0x80030000, NULL, &mxsfb_pdata),
 	OF_DEV_AUXDATA("fsl,imx28-flexcan", 0x80032000, NULL, &flexcan_pdata[0]),
 	OF_DEV_AUXDATA("fsl,imx28-flexcan", 0x80034000, NULL, &flexcan_pdata[1]),
 	{ /* sentinel */ }
@@ -340,16 +237,6 @@ static void __init update_fec_mac_prop(enum mac_oui oui)
 	}
 }
 
-static void __init imx23_evk_init(void)
-{
-	mxsfb_pdata.mode_list = mx23evk_video_modes;
-	mxsfb_pdata.mode_count = ARRAY_SIZE(mx23evk_video_modes);
-	mxsfb_pdata.default_bpp = 32;
-	mxsfb_pdata.ld_intf_width = STMLCDIF_24BIT;
-	mxsfb_pdata.sync = MXSFB_SYNC_DATA_ENABLE_HIGH_ACT |
-				MXSFB_SYNC_DOTCLK_FAILING_ACT;
-}
-
 static inline void enable_clk_enet_out(void)
 {
 	struct clk *clk = clk_get_sys("enet_out", NULL);
@@ -360,16 +247,8 @@ static inline void enable_clk_enet_out(void)
 
 static void __init imx28_evk_init(void)
 {
-	enable_clk_enet_out();
 	update_fec_mac_prop(OUI_FSL);
 
-	mxsfb_pdata.mode_list = mx28evk_video_modes;
-	mxsfb_pdata.mode_count = ARRAY_SIZE(mx28evk_video_modes);
-	mxsfb_pdata.default_bpp = 32;
-	mxsfb_pdata.ld_intf_width = STMLCDIF_24BIT;
-	mxsfb_pdata.sync = MXSFB_SYNC_DATA_ENABLE_HIGH_ACT |
-				MXSFB_SYNC_DOTCLK_FAILING_ACT;
-
 	mxs_saif_clkmux_select(MXS_DIGCTL_SAIF_CLKMUX_EXTMSTR0);
 }
 
@@ -382,20 +261,6 @@ static void __init imx28_evk_post_init(void)
 	}
 }
 
-static void __init m28evk_init(void)
-{
-	mxsfb_pdata.mode_list = m28evk_video_modes;
-	mxsfb_pdata.mode_count = ARRAY_SIZE(m28evk_video_modes);
-	mxsfb_pdata.default_bpp = 16;
-	mxsfb_pdata.ld_intf_width = STMLCDIF_18BIT;
-	mxsfb_pdata.sync = MXSFB_SYNC_DATA_ENABLE_HIGH_ACT;
-}
-
-static void __init sc_sps1_init(void)
-{
-	enable_clk_enet_out();
-}
-
 static int apx4devkit_phy_fixup(struct phy_device *phy)
 {
 	phy->dev_flags |= MICREL_PHY_50MHZ_CLK;
@@ -409,13 +274,6 @@ static void __init apx4devkit_init(void)
 	if (IS_BUILTIN(CONFIG_PHYLIB))
 		phy_register_fixup_for_uid(PHY_ID_KSZ8051, MICREL_PHY_ID_MASK,
 					   apx4devkit_phy_fixup);
-
-	mxsfb_pdata.mode_list = apx4devkit_video_modes;
-	mxsfb_pdata.mode_count = ARRAY_SIZE(apx4devkit_video_modes);
-	mxsfb_pdata.default_bpp = 32;
-	mxsfb_pdata.ld_intf_width = STMLCDIF_24BIT;
-	mxsfb_pdata.sync = MXSFB_SYNC_DATA_ENABLE_HIGH_ACT |
-				MXSFB_SYNC_DOTCLK_FAILING_ACT;
 }
 
 #define ENET0_MDC__GPIO_4_0	MXS_GPIO_NR(4, 0)
@@ -494,52 +352,24 @@ static void __init tx28_post_init(void)
 
 static void __init cfa10049_init(void)
 {
-	enable_clk_enet_out();
 	update_fec_mac_prop(OUI_CRYSTALFONTZ);
-
-	mxsfb_pdata.mode_list = cfa10049_video_modes;
-	mxsfb_pdata.mode_count = ARRAY_SIZE(cfa10049_video_modes);
-	mxsfb_pdata.default_bpp = 32;
-	mxsfb_pdata.ld_intf_width = STMLCDIF_18BIT;
-	mxsfb_pdata.sync = MXSFB_SYNC_DATA_ENABLE_HIGH_ACT;
 }
 
 static void __init cfa10037_init(void)
 {
-	enable_clk_enet_out();
 	update_fec_mac_prop(OUI_CRYSTALFONTZ);
 }
 
-static void __init apf28_init(void)
-{
-	enable_clk_enet_out();
-
-	mxsfb_pdata.mode_list = apf28dev_video_modes;
-	mxsfb_pdata.mode_count = ARRAY_SIZE(apf28dev_video_modes);
-	mxsfb_pdata.default_bpp = 16;
-	mxsfb_pdata.ld_intf_width = STMLCDIF_16BIT;
-	mxsfb_pdata.sync = MXSFB_SYNC_DATA_ENABLE_HIGH_ACT |
-				MXSFB_SYNC_DOTCLK_FAILING_ACT;
-}
-
 static void __init mxs_machine_init(void)
 {
 	if (of_machine_is_compatible("fsl,imx28-evk"))
 		imx28_evk_init();
-	else if (of_machine_is_compatible("fsl,imx23-evk"))
-		imx23_evk_init();
-	else if (of_machine_is_compatible("denx,m28evk"))
-		m28evk_init();
 	else if (of_machine_is_compatible("bluegiga,apx4devkit"))
 		apx4devkit_init();
 	else if (of_machine_is_compatible("crystalfontz,cfa10037"))
 		cfa10037_init();
 	else if (of_machine_is_compatible("crystalfontz,cfa10049"))
 		cfa10049_init();
-	else if (of_machine_is_compatible("armadeus,imx28-apf28"))
-		apf28_init();
-	else if (of_machine_is_compatible("schulercontrol,imx28-sps1"))
-		sc_sps1_init();
 
 	of_platform_populate(NULL, of_default_bus_match_table,
 			     mxs_auxdata_lookup, NULL);
diff --git a/drivers/dma/mxs-dma.c b/drivers/dma/mxs-dma.c
index 8f6d30d37c4..b48a79c2884 100644
--- a/drivers/dma/mxs-dma.c
+++ b/drivers/dma/mxs-dma.c
@@ -27,6 +27,7 @@
 #include <linux/stmp_device.h>
 #include <linux/of.h>
 #include <linux/of_device.h>
+#include <linux/of_dma.h>
 
 #include <asm/irq.h>
 
@@ -139,6 +140,8 @@ struct mxs_dma_engine {
 	struct dma_device		dma_device;
 	struct device_dma_parameters	dma_parms;
 	struct mxs_dma_chan		mxs_chans[MXS_DMA_CHANNELS];
+	struct platform_device		*pdev;
+	unsigned int			nr_channels;
 };
 
 struct mxs_dma_type {
@@ -350,10 +353,8 @@ static int mxs_dma_alloc_chan_resources(struct dma_chan *chan)
 	struct mxs_dma_engine *mxs_dma = mxs_chan->mxs_dma;
 	int ret;
 
-	if (!data)
-		return -EINVAL;
-
-	mxs_chan->chan_irq = data->chan_irq;
+	if (data)
+		mxs_chan->chan_irq = data->chan_irq;
 
 	mxs_chan->ccw = dma_alloc_coherent(mxs_dma->dma_device.dev,
 				CCW_BLOCK_SIZE, &mxs_chan->ccw_phys,
@@ -665,8 +666,55 @@ err_out:
 	return ret;
 }
 
+struct mxs_dma_filter_param {
+	struct device_node *of_node;
+	unsigned int chan_id;
+};
+
+static bool mxs_dma_filter_fn(struct dma_chan *chan, void *fn_param)
+{
+	struct mxs_dma_filter_param *param = fn_param;
+	struct mxs_dma_chan *mxs_chan = to_mxs_dma_chan(chan);
+	struct mxs_dma_engine *mxs_dma = mxs_chan->mxs_dma;
+	int chan_irq;
+
+	if (mxs_dma->dma_device.dev->of_node != param->of_node)
+		return false;
+
+	if (chan->chan_id != param->chan_id)
+		return false;
+
+	chan_irq = platform_get_irq(mxs_dma->pdev, param->chan_id);
+	if (chan_irq < 0)
+		return false;
+
+	mxs_chan->chan_irq = chan_irq;
+
+	return true;
+}
+
+struct dma_chan *mxs_dma_xlate(struct of_phandle_args *dma_spec,
+			       struct of_dma *ofdma)
+{
+	struct mxs_dma_engine *mxs_dma = ofdma->of_dma_data;
+	dma_cap_mask_t mask = mxs_dma->dma_device.cap_mask;
+	struct mxs_dma_filter_param param;
+
+	if (dma_spec->args_count != 1)
+		return NULL;
+
+	param.of_node = ofdma->of_node;
+	param.chan_id = dma_spec->args[0];
+
+	if (param.chan_id >= mxs_dma->nr_channels)
+		return NULL;
+
+	return dma_request_channel(mask, mxs_dma_filter_fn, &param);
+}
+
 static int __init mxs_dma_probe(struct platform_device *pdev)
 {
+	struct device_node *np = pdev->dev.of_node;
 	const struct platform_device_id *id_entry;
 	const struct of_device_id *of_id;
 	const struct mxs_dma_type *dma_type;
@@ -674,10 +722,16 @@ static int __init mxs_dma_probe(struct platform_device *pdev)
 	struct resource *iores;
 	int ret, i;
 
-	mxs_dma = kzalloc(sizeof(*mxs_dma), GFP_KERNEL);
+	mxs_dma = devm_kzalloc(&pdev->dev, sizeof(*mxs_dma), GFP_KERNEL);
 	if (!mxs_dma)
 		return -ENOMEM;
 
+	ret = of_property_read_u32(np, "dma-channels", &mxs_dma->nr_channels);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to read dma-channels\n");
+		return ret;
+	}
+
 	of_id = of_match_device(mxs_dma_dt_ids, &pdev->dev);
 	if (of_id)
 		id_entry = of_id->data;
@@ -689,24 +743,13 @@ static int __init mxs_dma_probe(struct platform_device *pdev)
 	mxs_dma->dev_id = dma_type->id;
 
 	iores = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	mxs_dma->base = devm_ioremap_resource(&pdev->dev, iores);
+	if (IS_ERR(mxs_dma->base))
+		return PTR_ERR(mxs_dma->base);
 
-	if (!request_mem_region(iores->start, resource_size(iores),
-				pdev->name)) {
-		ret = -EBUSY;
-		goto err_request_region;
-	}
-
-	mxs_dma->base = ioremap(iores->start, resource_size(iores));
-	if (!mxs_dma->base) {
-		ret = -ENOMEM;
-		goto err_ioremap;
-	}
-
-	mxs_dma->clk = clk_get(&pdev->dev, NULL);
-	if (IS_ERR(mxs_dma->clk)) {
-		ret = PTR_ERR(mxs_dma->clk);
-		goto err_clk;
-	}
+	mxs_dma->clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(mxs_dma->clk))
+		return PTR_ERR(mxs_dma->clk);
 
 	dma_cap_set(DMA_SLAVE, mxs_dma->dma_device.cap_mask);
 	dma_cap_set(DMA_CYCLIC, mxs_dma->dma_device.cap_mask);
@@ -732,8 +775,9 @@ static int __init mxs_dma_probe(struct platform_device *pdev)
 
 	ret = mxs_dma_init(mxs_dma);
 	if (ret)
-		goto err_init;
+		return ret;
 
+	mxs_dma->pdev = pdev;
 	mxs_dma->dma_device.dev = &pdev->dev;
 
 	/* mxs_dma gets 65535 bytes maximum sg size */
@@ -751,22 +795,19 @@ static int __init mxs_dma_probe(struct platform_device *pdev)
 	ret = dma_async_device_register(&mxs_dma->dma_device);
 	if (ret) {
 		dev_err(mxs_dma->dma_device.dev, "unable to register\n");
-		goto err_init;
+		return ret;
+	}
+
+	ret = of_dma_controller_register(np, mxs_dma_xlate, mxs_dma);
+	if (ret) {
+		dev_err(mxs_dma->dma_device.dev,
+			"failed to register controller\n");
+		dma_async_device_unregister(&mxs_dma->dma_device);
 	}
 
 	dev_info(mxs_dma->dma_device.dev, "initialized\n");
 
 	return 0;
-
-err_init:
-	clk_put(mxs_dma->clk);
-err_clk:
-	iounmap(mxs_dma->base);
-err_ioremap:
-	release_mem_region(iores->start, resource_size(iores));
-err_request_region:
-	kfree(mxs_dma);
-	return ret;
 }
 
 static struct platform_driver mxs_dma_driver = {
diff --git a/drivers/i2c/busses/i2c-mxs.c b/drivers/i2c/busses/i2c-mxs.c
index 120f2464669..d1ba6b403b8 100644
--- a/drivers/i2c/busses/i2c-mxs.c
+++ b/drivers/i2c/busses/i2c-mxs.c
@@ -31,7 +31,6 @@
 #include <linux/of_i2c.h>
 #include <linux/dma-mapping.h>
 #include <linux/dmaengine.h>
-#include <linux/fsl/mxs-dma.h>
 
 #define DRIVER_NAME "mxs-i2c"
 
@@ -113,9 +112,7 @@ struct mxs_i2c_dev {
 	uint32_t timing1;
 
 	/* DMA support components */
-	int				dma_channel;
 	struct dma_chan         	*dmach;
-	struct mxs_dma_data		dma_data;
 	uint32_t			pio_data[2];
 	uint32_t			addr_data;
 	struct scatterlist		sg_io[2];
@@ -518,21 +515,6 @@ static const struct i2c_algorithm mxs_i2c_algo = {
 	.functionality = mxs_i2c_func,
 };
 
-static bool mxs_i2c_dma_filter(struct dma_chan *chan, void *param)
-{
-	struct mxs_i2c_dev *i2c = param;
-
-	if (!mxs_dma_is_apbx(chan))
-		return false;
-
-	if (chan->chan_id != i2c->dma_channel)
-		return false;
-
-	chan->private = &i2c->dma_data;
-
-	return true;
-}
-
 static void mxs_i2c_derive_timing(struct mxs_i2c_dev *i2c, int speed)
 {
 	/* The I2C block clock run at 24MHz */
@@ -577,17 +559,6 @@ static int mxs_i2c_get_ofdata(struct mxs_i2c_dev *i2c)
 	struct device_node *node = dev->of_node;
 	int ret;
 
-	/*
-	 * TODO: This is a temporary solution and should be changed
-	 * to use generic DMA binding later when the helpers get in.
-	 */
-	ret = of_property_read_u32(node, "fsl,i2c-dma-channel",
-				   &i2c->dma_channel);
-	if (ret) {
-		dev_err(dev, "Failed to get DMA channel!\n");
-		return -ENODEV;
-	}
-
 	ret = of_property_read_u32(node, "clock-frequency", &speed);
 	if (ret) {
 		dev_warn(dev, "No I2C speed selected, using 100kHz\n");
@@ -607,8 +578,7 @@ static int mxs_i2c_probe(struct platform_device *pdev)
 	struct pinctrl *pinctrl;
 	struct resource *res;
 	resource_size_t res_size;
-	int err, irq, dmairq;
-	dma_cap_mask_t mask;
+	int err, irq;
 
 	pinctrl = devm_pinctrl_get_select_default(dev);
 	if (IS_ERR(pinctrl))
@@ -620,9 +590,8 @@ static int mxs_i2c_probe(struct platform_device *pdev)
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	irq = platform_get_irq(pdev, 0);
-	dmairq = platform_get_irq(pdev, 1);
 
-	if (!res || irq < 0 || dmairq < 0)
+	if (!res || irq < 0)
 		return -ENOENT;
 
 	res_size = resource_size(res);
@@ -648,10 +617,7 @@ static int mxs_i2c_probe(struct platform_device *pdev)
 	}
 
 	/* Setup the DMA */
-	dma_cap_zero(mask);
-	dma_cap_set(DMA_SLAVE, mask);
-	i2c->dma_data.chan_irq = dmairq;
-	i2c->dmach = dma_request_channel(mask, mxs_i2c_dma_filter, i2c);
+	i2c->dmach = dma_request_slave_channel(dev, "rx-tx");
 	if (!i2c->dmach) {
 		dev_err(dev, "Failed to request dma\n");
 		return -ENODEV;
diff --git a/drivers/mmc/host/mxs-mmc.c b/drivers/mmc/host/mxs-mmc.c
index 4efe3021b21..4fdc71113e6 100644
--- a/drivers/mmc/host/mxs-mmc.c
+++ b/drivers/mmc/host/mxs-mmc.c
@@ -548,22 +548,6 @@ static const struct mmc_host_ops mxs_mmc_ops = {
 	.enable_sdio_irq = mxs_mmc_enable_sdio_irq,
 };
 
-static bool mxs_mmc_dma_filter(struct dma_chan *chan, void *param)
-{
-	struct mxs_mmc_host *host = param;
-	struct mxs_ssp *ssp = &host->ssp;
-
-	if (!mxs_dma_is_apbh(chan))
-		return false;
-
-	if (chan->chan_id != ssp->dma_channel)
-		return false;
-
-	chan->private = &ssp->dma_data;
-
-	return true;
-}
-
 static struct platform_device_id mxs_ssp_ids[] = {
 	{
 		.name = "imx23-mmc",
@@ -591,20 +575,17 @@ static int mxs_mmc_probe(struct platform_device *pdev)
 	struct device_node *np = pdev->dev.of_node;
 	struct mxs_mmc_host *host;
 	struct mmc_host *mmc;
-	struct resource *iores, *dmares;
+	struct resource *iores;
 	struct pinctrl *pinctrl;
-	int ret = 0, irq_err, irq_dma;
-	dma_cap_mask_t mask;
+	int ret = 0, irq_err;
 	struct regulator *reg_vmmc;
 	enum of_gpio_flags flags;
 	struct mxs_ssp *ssp;
 	u32 bus_width = 0;
 
 	iores = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	dmares = platform_get_resource(pdev, IORESOURCE_DMA, 0);
 	irq_err = platform_get_irq(pdev, 0);
-	irq_dma = platform_get_irq(pdev, 1);
-	if (!iores || irq_err < 0 || irq_dma < 0)
+	if (!iores || irq_err < 0)
 		return -EINVAL;
 
 	mmc = mmc_alloc_host(sizeof(struct mxs_mmc_host), &pdev->dev);
@@ -620,23 +601,7 @@ static int mxs_mmc_probe(struct platform_device *pdev)
 		goto out_mmc_free;
 	}
 
-	if (np) {
-		ssp->devid = (enum mxs_ssp_id) of_id->data;
-		/*
-		 * TODO: This is a temporary solution and should be changed
-		 * to use generic DMA binding later when the helpers get in.
-		 */
-		ret = of_property_read_u32(np, "fsl,ssp-dma-channel",
-					   &ssp->dma_channel);
-		if (ret) {
-			dev_err(mmc_dev(host->mmc),
-				"failed to get dma channel\n");
-			goto out_mmc_free;
-		}
-	} else {
-		ssp->devid = pdev->id_entry->driver_data;
-		ssp->dma_channel = dmares->start;
-	}
+	ssp->devid = (enum mxs_ssp_id) of_id->data;
 
 	host->mmc = mmc;
 	host->sdio_irq_en = 0;
@@ -666,10 +631,7 @@ static int mxs_mmc_probe(struct platform_device *pdev)
 
 	mxs_mmc_reset(host);
 
-	dma_cap_zero(mask);
-	dma_cap_set(DMA_SLAVE, mask);
-	ssp->dma_data.chan_irq = irq_dma;
-	ssp->dmach = dma_request_channel(mask, mxs_mmc_dma_filter, host);
+	ssp->dmach = dma_request_slave_channel(&pdev->dev, "rx-tx");
 	if (!ssp->dmach) {
 		dev_err(mmc_dev(host->mmc),
 			"%s: failed to request dma\n", __func__);
diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
index 717881a3d1b..25ecfa1822a 100644
--- a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
+++ b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
@@ -36,7 +36,6 @@
 #define GPMI_NAND_GPMI_REGS_ADDR_RES_NAME  "gpmi-nand"
 #define GPMI_NAND_BCH_REGS_ADDR_RES_NAME   "bch"
 #define GPMI_NAND_BCH_INTERRUPT_RES_NAME   "bch"
-#define GPMI_NAND_DMA_INTERRUPT_RES_NAME   "gpmi-dma"
 
 /* add our owner bbt descriptor */
 static uint8_t scan_ff_pattern[] = { 0xff };
@@ -420,28 +419,6 @@ static void release_bch_irq(struct gpmi_nand_data *this)
 		free_irq(i, this);
 }
 
-static bool gpmi_dma_filter(struct dma_chan *chan, void *param)
-{
-	struct gpmi_nand_data *this = param;
-	int dma_channel = (int)this->private;
-
-	if (!mxs_dma_is_apbh(chan))
-		return false;
-	/*
-	 * only catch the GPMI dma channels :
-	 *	for mx23 :	MX23_DMA_GPMI0 ~ MX23_DMA_GPMI3
-	 *		(These four channels share the same IRQ!)
-	 *
-	 *	for mx28 :	MX28_DMA_GPMI0 ~ MX28_DMA_GPMI7
-	 *		(These eight channels share the same IRQ!)
-	 */
-	if (dma_channel == chan->chan_id) {
-		chan->private = &this->dma_data;
-		return true;
-	}
-	return false;
-}
-
 static void release_dma_channels(struct gpmi_nand_data *this)
 {
 	unsigned int i;
@@ -455,36 +432,10 @@ static void release_dma_channels(struct gpmi_nand_data *this)
 static int acquire_dma_channels(struct gpmi_nand_data *this)
 {
 	struct platform_device *pdev = this->pdev;
-	struct resource *r_dma;
-	struct device_node *dn;
-	u32 dma_channel;
-	int ret;
 	struct dma_chan *dma_chan;
-	dma_cap_mask_t mask;
-
-	/* dma channel, we only use the first one. */
-	dn = pdev->dev.of_node;
-	ret = of_property_read_u32(dn, "fsl,gpmi-dma-channel", &dma_channel);
-	if (ret) {
-		pr_err("unable to get DMA channel from dt.\n");
-		goto acquire_err;
-	}
-	this->private = (void *)dma_channel;
-
-	/* gpmi dma interrupt */
-	r_dma = platform_get_resource_byname(pdev, IORESOURCE_IRQ,
-					GPMI_NAND_DMA_INTERRUPT_RES_NAME);
-	if (!r_dma) {
-		pr_err("Can't get resource for DMA\n");
-		goto acquire_err;
-	}
-	this->dma_data.chan_irq = r_dma->start;
 
 	/* request dma channel */
-	dma_cap_zero(mask);
-	dma_cap_set(DMA_SLAVE, mask);
-
-	dma_chan = dma_request_channel(mask, gpmi_dma_filter, this);
+	dma_chan = dma_request_slave_channel(&pdev->dev, "rx-tx");
 	if (!dma_chan) {
 		pr_err("Failed to request DMA channel.\n");
 		goto acquire_err;
diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-nand.h b/drivers/mtd/nand/gpmi-nand/gpmi-nand.h
index 07294773127..a7685e3a874 100644
--- a/drivers/mtd/nand/gpmi-nand/gpmi-nand.h
+++ b/drivers/mtd/nand/gpmi-nand/gpmi-nand.h
@@ -20,7 +20,7 @@
 #include <linux/mtd/nand.h>
 #include <linux/platform_device.h>
 #include <linux/dma-mapping.h>
-#include <linux/fsl/mxs-dma.h>
+#include <linux/dmaengine.h>
 
 #define GPMI_CLK_MAX 5 /* MX6Q needs five clocks */
 struct resources {
@@ -180,7 +180,6 @@ struct gpmi_nand_data {
 	/* DMA channels */
 #define DMA_CHANS		8
 	struct dma_chan		*dma_chans[DMA_CHANS];
-	struct mxs_dma_data	dma_data;
 	enum dma_ops_type	last_dma_type;
 	enum dma_ops_type	dma_type;
 	struct completion	dma_done;
diff --git a/drivers/net/ethernet/freescale/fec.c b/drivers/net/ethernet/freescale/fec.c
index 911d0253dbb..dd098ea44d4 100644
--- a/drivers/net/ethernet/freescale/fec.c
+++ b/drivers/net/ethernet/freescale/fec.c
@@ -1802,18 +1802,23 @@ fec_probe(struct platform_device *pdev)
 		goto failed_clk;
 	}
 
+	/* enet_out is optional, depends on board */
+	fep->clk_enet_out = devm_clk_get(&pdev->dev, "enet_out");
+	if (IS_ERR(fep->clk_enet_out))
+		fep->clk_enet_out = NULL;
+
 	fep->clk_ptp = devm_clk_get(&pdev->dev, "ptp");
 	fep->bufdesc_ex =
 		pdev->id_entry->driver_data & FEC_QUIRK_HAS_BUFDESC_EX;
 	if (IS_ERR(fep->clk_ptp)) {
-		ret = PTR_ERR(fep->clk_ptp);
+		fep->clk_ptp = NULL;
 		fep->bufdesc_ex = 0;
 	}
 
 	clk_prepare_enable(fep->clk_ahb);
 	clk_prepare_enable(fep->clk_ipg);
-	if (!IS_ERR(fep->clk_ptp))
-		clk_prepare_enable(fep->clk_ptp);
+	clk_prepare_enable(fep->clk_enet_out);
+	clk_prepare_enable(fep->clk_ptp);
 
 	reg_phy = devm_regulator_get(&pdev->dev, "phy");
 	if (!IS_ERR(reg_phy)) {
@@ -1878,8 +1883,8 @@ failed_irq:
 failed_regulator:
 	clk_disable_unprepare(fep->clk_ahb);
 	clk_disable_unprepare(fep->clk_ipg);
-	if (!IS_ERR(fep->clk_ptp))
-		clk_disable_unprepare(fep->clk_ptp);
+	clk_disable_unprepare(fep->clk_enet_out);
+	clk_disable_unprepare(fep->clk_ptp);
 failed_pin:
 failed_clk:
 	iounmap(fep->hwp);
@@ -1905,6 +1910,7 @@ fec_drv_remove(struct platform_device *pdev)
 	clk_disable_unprepare(fep->clk_ptp);
 	if (fep->ptp_clock)
 		ptp_clock_unregister(fep->ptp_clock);
+	clk_disable_unprepare(fep->clk_enet_out);
 	clk_disable_unprepare(fep->clk_ahb);
 	clk_disable_unprepare(fep->clk_ipg);
 	for (i = 0; i < FEC_IRQ_NUM; i++) {
@@ -1935,6 +1941,7 @@ fec_suspend(struct device *dev)
 		fec_stop(ndev);
 		netif_device_detach(ndev);
 	}
+	clk_disable_unprepare(fep->clk_enet_out);
 	clk_disable_unprepare(fep->clk_ahb);
 	clk_disable_unprepare(fep->clk_ipg);
 
@@ -1947,6 +1954,7 @@ fec_resume(struct device *dev)
 	struct net_device *ndev = dev_get_drvdata(dev);
 	struct fec_enet_private *fep = netdev_priv(ndev);
 
+	clk_prepare_enable(fep->clk_enet_out);
 	clk_prepare_enable(fep->clk_ahb);
 	clk_prepare_enable(fep->clk_ipg);
 	if (netif_running(ndev)) {
diff --git a/drivers/net/ethernet/freescale/fec.h b/drivers/net/ethernet/freescale/fec.h
index eb437296283..feabcb6a78b 100644
--- a/drivers/net/ethernet/freescale/fec.h
+++ b/drivers/net/ethernet/freescale/fec.h
@@ -207,6 +207,7 @@ struct fec_enet_private {
 
 	struct clk *clk_ipg;
 	struct clk *clk_ahb;
+	struct clk *clk_enet_out;
 	struct clk *clk_ptp;
 
 	/* The saved address of a sent-in-place packet/buffer, for skfree(). */
diff --git a/drivers/spi/spi-mxs.c b/drivers/spi/spi-mxs.c
index 22a0af0147f..7b1c014b074 100644
--- a/drivers/spi/spi-mxs.c
+++ b/drivers/spi/spi-mxs.c
@@ -490,21 +490,6 @@ static int mxs_spi_transfer_one(struct spi_master *master,
 	return status;
 }
 
-static bool mxs_ssp_dma_filter(struct dma_chan *chan, void *param)
-{
-	struct mxs_ssp *ssp = param;
-
-	if (!mxs_dma_is_apbh(chan))
-		return false;
-
-	if (chan->chan_id != ssp->dma_channel)
-		return false;
-
-	chan->private = &ssp->dma_data;
-
-	return true;
-}
-
 static const struct of_device_id mxs_spi_dt_ids[] = {
 	{ .compatible = "fsl,imx23-spi", .data = (void *) IMX23_SSP, },
 	{ .compatible = "fsl,imx28-spi", .data = (void *) IMX28_SSP, },
@@ -520,13 +505,12 @@ static int mxs_spi_probe(struct platform_device *pdev)
 	struct spi_master *master;
 	struct mxs_spi *spi;
 	struct mxs_ssp *ssp;
-	struct resource *iores, *dmares;
+	struct resource *iores;
 	struct pinctrl *pinctrl;
 	struct clk *clk;
 	void __iomem *base;
-	int devid, dma_channel, clk_freq;
-	int ret = 0, irq_err, irq_dma;
-	dma_cap_mask_t mask;
+	int devid, clk_freq;
+	int ret = 0, irq_err;
 
 	/*
 	 * Default clock speed for the SPI core. 160MHz seems to
@@ -537,8 +521,7 @@ static int mxs_spi_probe(struct platform_device *pdev)
 
 	iores = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	irq_err = platform_get_irq(pdev, 0);
-	irq_dma = platform_get_irq(pdev, 1);
-	if (!iores || irq_err < 0 || irq_dma < 0)
+	if (!iores || irq_err < 0)
 		return -EINVAL;
 
 	base = devm_ioremap_resource(&pdev->dev, iores);
@@ -553,32 +536,11 @@ static int mxs_spi_probe(struct platform_device *pdev)
 	if (IS_ERR(clk))
 		return PTR_ERR(clk);
 
-	if (np) {
-		devid = (enum mxs_ssp_id) of_id->data;
-		/*
-		 * TODO: This is a temporary solution and should be changed
-		 * to use generic DMA binding later when the helpers get in.
-		 */
-		ret = of_property_read_u32(np, "fsl,ssp-dma-channel",
-					   &dma_channel);
-		if (ret) {
-			dev_err(&pdev->dev,
-				"Failed to get DMA channel\n");
-			return -EINVAL;
-		}
-
-		ret = of_property_read_u32(np, "clock-frequency",
-					   &clk_freq);
-		if (ret)
-			clk_freq = clk_freq_default;
-	} else {
-		dmares = platform_get_resource(pdev, IORESOURCE_DMA, 0);
-		if (!dmares)
-			return -EINVAL;
-		devid = pdev->id_entry->driver_data;
-		dma_channel = dmares->start;
+	devid = (enum mxs_ssp_id) of_id->data;
+	ret = of_property_read_u32(np, "clock-frequency",
+				   &clk_freq);
+	if (ret)
 		clk_freq = clk_freq_default;
-	}
 
 	master = spi_alloc_master(&pdev->dev, sizeof(*spi));
 	if (!master)
@@ -597,7 +559,6 @@ static int mxs_spi_probe(struct platform_device *pdev)
 	ssp->clk = clk;
 	ssp->base = base;
 	ssp->devid = devid;
-	ssp->dma_channel = dma_channel;
 
 	init_completion(&spi->c);
 
@@ -606,10 +567,7 @@ static int mxs_spi_probe(struct platform_device *pdev)
 	if (ret)
 		goto out_master_free;
 
-	dma_cap_zero(mask);
-	dma_cap_set(DMA_SLAVE, mask);
-	ssp->dma_data.chan_irq = irq_dma;
-	ssp->dmach = dma_request_channel(mask, mxs_ssp_dma_filter, ssp);
+	ssp->dmach = dma_request_slave_channel(&pdev->dev, "rx-tx");
 	if (!ssp->dmach) {
 		dev_err(ssp->dev, "Failed to request DMA\n");
 		goto out_master_free;
diff --git a/drivers/tty/serial/mxs-auart.c b/drivers/tty/serial/mxs-auart.c
index d549fe1fa42..269a27caff3 100644
--- a/drivers/tty/serial/mxs-auart.c
+++ b/drivers/tty/serial/mxs-auart.c
@@ -35,7 +35,7 @@
 #include <linux/pinctrl/consumer.h>
 #include <linux/of_device.h>
 #include <linux/dma-mapping.h>
-#include <linux/fsl/mxs-dma.h>
+#include <linux/dmaengine.h>
 
 #include <asm/cacheflush.h>
 
@@ -148,11 +148,6 @@ struct mxs_auart_port {
 	struct device *dev;
 
 	/* for DMA */
-	struct mxs_dma_data dma_data;
-	int dma_channel_rx, dma_channel_tx;
-	int dma_irq_rx, dma_irq_tx;
-	int dma_channel;
-
 	struct scatterlist tx_sgl;
 	struct dma_chan	*tx_dma_chan;
 	void *tx_dma_buf;
@@ -440,20 +435,6 @@ static u32 mxs_auart_get_mctrl(struct uart_port *u)
 	return mctrl;
 }
 
-static bool mxs_auart_dma_filter(struct dma_chan *chan, void *param)
-{
-	struct mxs_auart_port *s = param;
-
-	if (!mxs_dma_is_apbx(chan))
-		return false;
-
-	if (s->dma_channel == chan->chan_id) {
-		chan->private = &s->dma_data;
-		return true;
-	}
-	return false;
-}
-
 static int mxs_auart_dma_prep_rx(struct mxs_auart_port *s);
 static void dma_rx_callback(void *arg)
 {
@@ -545,21 +526,11 @@ static void mxs_auart_dma_exit(struct mxs_auart_port *s)
 
 static int mxs_auart_dma_init(struct mxs_auart_port *s)
 {
-	dma_cap_mask_t mask;
-
 	if (auart_dma_enabled(s))
 		return 0;
 
-	/* We do not get the right DMA channels. */
-	if (s->dma_channel_rx == -1 || s->dma_channel_tx == -1)
-		return -EINVAL;
-
 	/* init for RX */
-	dma_cap_zero(mask);
-	dma_cap_set(DMA_SLAVE, mask);
-	s->dma_channel = s->dma_channel_rx;
-	s->dma_data.chan_irq = s->dma_irq_rx;
-	s->rx_dma_chan = dma_request_channel(mask, mxs_auart_dma_filter, s);
+	s->rx_dma_chan = dma_request_slave_channel(s->dev, "rx");
 	if (!s->rx_dma_chan)
 		goto err_out;
 	s->rx_dma_buf = kzalloc(UART_XMIT_SIZE, GFP_KERNEL | GFP_DMA);
@@ -567,9 +538,7 @@ static int mxs_auart_dma_init(struct mxs_auart_port *s)
 		goto err_out;
 
 	/* init for TX */
-	s->dma_channel = s->dma_channel_tx;
-	s->dma_data.chan_irq = s->dma_irq_tx;
-	s->tx_dma_chan = dma_request_channel(mask, mxs_auart_dma_filter, s);
+	s->tx_dma_chan = dma_request_slave_channel(s->dev, "tx");
 	if (!s->tx_dma_chan)
 		goto err_out;
 	s->tx_dma_buf = kzalloc(UART_XMIT_SIZE, GFP_KERNEL | GFP_DMA);
@@ -1020,7 +989,6 @@ static int serial_mxs_probe_dt(struct mxs_auart_port *s,
 		struct platform_device *pdev)
 {
 	struct device_node *np = pdev->dev.of_node;
-	u32 dma_channel[2];
 	int ret;
 
 	if (!np)
@@ -1034,20 +1002,8 @@ static int serial_mxs_probe_dt(struct mxs_auart_port *s,
 	}
 	s->port.line = ret;
 
-	s->dma_irq_rx = platform_get_irq(pdev, 1);
-	s->dma_irq_tx = platform_get_irq(pdev, 2);
+	s->flags |= MXS_AUART_DMA_CONFIG;
 
-	ret = of_property_read_u32_array(np, "fsl,auart-dma-channel",
-					dma_channel, 2);
-	if (ret == 0) {
-		s->dma_channel_rx = dma_channel[0];
-		s->dma_channel_tx = dma_channel[1];
-
-		s->flags |= MXS_AUART_DMA_CONFIG;
-	} else {
-		s->dma_channel_rx = -1;
-		s->dma_channel_tx = -1;
-	}
 	return 0;
 }
 
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index 4c1546f71d5..e7718fdad1e 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -2437,6 +2437,8 @@ config FB_MXS
 	select FB_CFB_FILLRECT
 	select FB_CFB_COPYAREA
 	select FB_CFB_IMAGEBLIT
+	select FB_MODE_HELPERS
+	select OF_VIDEOMODE
 	help
 	  Framebuffer support for the MXS SoC.
 
diff --git a/drivers/video/mxsfb.c b/drivers/video/mxsfb.c
index 45169cbaba6..1b2c26d1658 100644
--- a/drivers/video/mxsfb.c
+++ b/drivers/video/mxsfb.c
@@ -42,13 +42,15 @@
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/of_device.h>
-#include <linux/of_gpio.h>
+#include <video/of_display_timing.h>
 #include <linux/platform_device.h>
 #include <linux/clk.h>
 #include <linux/dma-mapping.h>
 #include <linux/io.h>
 #include <linux/pinctrl/consumer.h>
-#include <linux/mxsfb.h>
+#include <linux/fb.h>
+#include <linux/regulator/consumer.h>
+#include <video/videomode.h>
 
 #define REG_SET	4
 #define REG_CLR	8
@@ -107,7 +109,7 @@
 #define VDCTRL0_ENABLE_PRESENT		(1 << 28)
 #define VDCTRL0_VSYNC_ACT_HIGH		(1 << 27)
 #define VDCTRL0_HSYNC_ACT_HIGH		(1 << 26)
-#define VDCTRL0_DOTCLK_ACT_FAILING	(1 << 25)
+#define VDCTRL0_DOTCLK_ACT_FALLING	(1 << 25)
 #define VDCTRL0_ENABLE_ACT_HIGH		(1 << 24)
 #define VDCTRL0_VSYNC_PERIOD_UNIT	(1 << 21)
 #define VDCTRL0_VSYNC_PULSE_WIDTH_UNIT	(1 << 20)
@@ -142,6 +144,14 @@
 #define BLUE 2
 #define TRANSP 3
 
+#define STMLCDIF_8BIT  1 /** pixel data bus to the display is of 8 bit width */
+#define STMLCDIF_16BIT 0 /** pixel data bus to the display is of 16 bit width */
+#define STMLCDIF_18BIT 2 /** pixel data bus to the display is of 18 bit width */
+#define STMLCDIF_24BIT 3 /** pixel data bus to the display is of 24 bit width */
+
+#define MXSFB_SYNC_DATA_ENABLE_HIGH_ACT	(1 << 6)
+#define MXSFB_SYNC_DOTCLK_FALLING_ACT	(1 << 7) /* negtive edge sampling */
+
 enum mxsfb_devtype {
 	MXSFB_V3,
 	MXSFB_V4,
@@ -168,8 +178,8 @@ struct mxsfb_info {
 	unsigned ld_intf_width;
 	unsigned dotclk_delay;
 	const struct mxsfb_devdata *devdata;
-	int mapped;
 	u32 sync;
+	struct regulator *reg_lcd;
 };
 
 #define mxsfb_is_v3(host) (host->devdata->ipversion == 3)
@@ -329,9 +339,19 @@ static void mxsfb_enable_controller(struct fb_info *fb_info)
 {
 	struct mxsfb_info *host = to_imxfb_host(fb_info);
 	u32 reg;
+	int ret;
 
 	dev_dbg(&host->pdev->dev, "%s\n", __func__);
 
+	if (host->reg_lcd) {
+		ret = regulator_enable(host->reg_lcd);
+		if (ret) {
+			dev_err(&host->pdev->dev,
+				"lcd regulator enable failed:	%d\n", ret);
+			return;
+		}
+	}
+
 	clk_prepare_enable(host->clk);
 	clk_set_rate(host->clk, PICOS2KHZ(fb_info->var.pixclock) * 1000U);
 
@@ -353,6 +373,7 @@ static void mxsfb_disable_controller(struct fb_info *fb_info)
 	struct mxsfb_info *host = to_imxfb_host(fb_info);
 	unsigned loop;
 	u32 reg;
+	int ret;
 
 	dev_dbg(&host->pdev->dev, "%s\n", __func__);
 
@@ -376,6 +397,13 @@ static void mxsfb_disable_controller(struct fb_info *fb_info)
 	clk_disable_unprepare(host->clk);
 
 	host->enabled = 0;
+
+	if (host->reg_lcd) {
+		ret = regulator_disable(host->reg_lcd);
+		if (ret)
+			dev_err(&host->pdev->dev,
+				"lcd regulator disable failed: %d\n", ret);
+	}
 }
 
 static int mxsfb_set_par(struct fb_info *fb_info)
@@ -459,8 +487,8 @@ static int mxsfb_set_par(struct fb_info *fb_info)
 		vdctrl0 |= VDCTRL0_VSYNC_ACT_HIGH;
 	if (host->sync & MXSFB_SYNC_DATA_ENABLE_HIGH_ACT)
 		vdctrl0 |= VDCTRL0_ENABLE_ACT_HIGH;
-	if (host->sync & MXSFB_SYNC_DOTCLK_FAILING_ACT)
-		vdctrl0 |= VDCTRL0_DOTCLK_ACT_FAILING;
+	if (host->sync & MXSFB_SYNC_DOTCLK_FALLING_ACT)
+		vdctrl0 |= VDCTRL0_DOTCLK_ACT_FALLING;
 
 	writel(vdctrl0, host->base + LCDC_VDCTRL0);
 
@@ -679,14 +707,105 @@ static int mxsfb_restore_mode(struct mxsfb_info *host)
 	return 0;
 }
 
+static int mxsfb_init_fbinfo_dt(struct mxsfb_info *host)
+{
+	struct fb_info *fb_info = &host->fb_info;
+	struct fb_var_screeninfo *var = &fb_info->var;
+	struct device *dev = &host->pdev->dev;
+	struct device_node *np = host->pdev->dev.of_node;
+	struct device_node *display_np;
+	struct device_node *timings_np;
+	struct display_timings *timings;
+	u32 width;
+	int i;
+	int ret = 0;
+
+	display_np = of_parse_phandle(np, "display", 0);
+	if (!display_np) {
+		dev_err(dev, "failed to find display phandle\n");
+		return -ENOENT;
+	}
+
+	ret = of_property_read_u32(display_np, "bus-width", &width);
+	if (ret < 0) {
+		dev_err(dev, "failed to get property bus-width\n");
+		goto put_display_node;
+	}
+
+	switch (width) {
+	case 8:
+		host->ld_intf_width = STMLCDIF_8BIT;
+		break;
+	case 16:
+		host->ld_intf_width = STMLCDIF_16BIT;
+		break;
+	case 18:
+		host->ld_intf_width = STMLCDIF_18BIT;
+		break;
+	case 24:
+		host->ld_intf_width = STMLCDIF_24BIT;
+		break;
+	default:
+		dev_err(dev, "invalid bus-width value\n");
+		ret = -EINVAL;
+		goto put_display_node;
+	}
+
+	ret = of_property_read_u32(display_np, "bits-per-pixel",
+				   &var->bits_per_pixel);
+	if (ret < 0) {
+		dev_err(dev, "failed to get property bits-per-pixel\n");
+		goto put_display_node;
+	}
+
+	timings = of_get_display_timings(display_np);
+	if (!timings) {
+		dev_err(dev, "failed to get display timings\n");
+		ret = -ENOENT;
+		goto put_display_node;
+	}
+
+	timings_np = of_find_node_by_name(display_np,
+					  "display-timings");
+	if (!timings_np) {
+		dev_err(dev, "failed to find display-timings node\n");
+		ret = -ENOENT;
+		goto put_display_node;
+	}
+
+	for (i = 0; i < of_get_child_count(timings_np); i++) {
+		struct videomode vm;
+		struct fb_videomode fb_vm;
+
+		ret = videomode_from_timing(timings, &vm, i);
+		if (ret < 0)
+			goto put_timings_node;
+		ret = fb_videomode_from_videomode(&vm, &fb_vm);
+		if (ret < 0)
+			goto put_timings_node;
+
+		if (vm.data_flags & DISPLAY_FLAGS_DE_HIGH)
+			host->sync |= MXSFB_SYNC_DATA_ENABLE_HIGH_ACT;
+		if (vm.data_flags & DISPLAY_FLAGS_PIXDATA_NEGEDGE)
+			host->sync |= MXSFB_SYNC_DOTCLK_FALLING_ACT;
+		fb_add_videomode(&fb_vm, &fb_info->modelist);
+	}
+
+put_timings_node:
+	of_node_put(timings_np);
+put_display_node:
+	of_node_put(display_np);
+	return ret;
+}
+
 static int mxsfb_init_fbinfo(struct mxsfb_info *host)
 {
 	struct fb_info *fb_info = &host->fb_info;
 	struct fb_var_screeninfo *var = &fb_info->var;
-	struct mxsfb_platform_data *pdata = host->pdev->dev.platform_data;
 	dma_addr_t fb_phys;
 	void *fb_virt;
-	unsigned fb_size = pdata->fb_size;
+	unsigned fb_size;
+	int ret;
 
 	fb_info->fbops = &mxsfb_ops;
 	fb_info->flags = FBINFO_FLAG_DEFAULT | FBINFO_READS_FAST;
@@ -696,40 +815,22 @@ static int mxsfb_init_fbinfo(struct mxsfb_info *host)
 	fb_info->fix.visual = FB_VISUAL_TRUECOLOR,
 	fb_info->fix.accel = FB_ACCEL_NONE;
 
-	var->bits_per_pixel = pdata->default_bpp ? pdata->default_bpp : 16;
+	ret = mxsfb_init_fbinfo_dt(host);
+	if (ret)
+		return ret;
+
 	var->nonstd = 0;
 	var->activate = FB_ACTIVATE_NOW;
 	var->accel_flags = 0;
 	var->vmode = FB_VMODE_NONINTERLACED;
 
-	host->dotclk_delay = pdata->dotclk_delay;
-	host->ld_intf_width = pdata->ld_intf_width;
-
 	/* Memory allocation for framebuffer */
-	if (pdata->fb_phys) {
-		if (!fb_size)
-			return -EINVAL;
-
-		fb_phys = pdata->fb_phys;
-
-		if (!request_mem_region(fb_phys, fb_size, host->pdev->name))
-			return -ENOMEM;
+	fb_size = SZ_2M;
+	fb_virt = alloc_pages_exact(fb_size, GFP_DMA);
+	if (!fb_virt)
+		return -ENOMEM;
 
-		fb_virt = ioremap(fb_phys, fb_size);
-		if (!fb_virt) {
-			release_mem_region(fb_phys, fb_size);
-			return -ENOMEM;
-		}
-		host->mapped = 1;
-	} else {
-		if (!fb_size)
-			fb_size = SZ_2M; /* default */
-		fb_virt = alloc_pages_exact(fb_size, GFP_DMA);
-		if (!fb_virt)
-			return -ENOMEM;
-
-		fb_phys = virt_to_phys(fb_virt);
-	}
+	fb_phys = virt_to_phys(fb_virt);
 
 	fb_info->fix.smem_start = fb_phys;
 	fb_info->screen_base = fb_virt;
@@ -745,13 +846,7 @@ static void mxsfb_free_videomem(struct mxsfb_info *host)
 {
 	struct fb_info *fb_info = &host->fb_info;
 
-	if (host->mapped) {
-		iounmap(fb_info->screen_base);
-		release_mem_region(fb_info->fix.smem_start,
-				fb_info->screen_size);
-	} else {
-		free_pages_exact(fb_info->screen_base, fb_info->fix.smem_len);
-	}
+	free_pages_exact(fb_info->screen_base, fb_info->fix.smem_len);
 }
 
 static struct platform_device_id mxsfb_devtype[] = {
@@ -778,47 +873,35 @@ static int mxsfb_probe(struct platform_device *pdev)
 {
 	const struct of_device_id *of_id =
 			of_match_device(mxsfb_dt_ids, &pdev->dev);
-	struct mxsfb_platform_data *pdata = pdev->dev.platform_data;
 	struct resource *res;
 	struct mxsfb_info *host;
 	struct fb_info *fb_info;
 	struct fb_modelist *modelist;
 	struct pinctrl *pinctrl;
-	int panel_enable;
-	enum of_gpio_flags flags;
-	int i, ret;
+	int ret;
 
 	if (of_id)
 		pdev->id_entry = of_id->data;
 
-	if (!pdata) {
-		dev_err(&pdev->dev, "No platformdata. Giving up\n");
-		return -ENODEV;
-	}
-
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	if (!res) {
 		dev_err(&pdev->dev, "Cannot get memory IO resource\n");
 		return -ENODEV;
 	}
 
-	if (!request_mem_region(res->start, resource_size(res), pdev->name))
-		return -EBUSY;
-
 	fb_info = framebuffer_alloc(sizeof(struct mxsfb_info), &pdev->dev);
 	if (!fb_info) {
 		dev_err(&pdev->dev, "Failed to allocate fbdev\n");
-		ret = -ENOMEM;
-		goto error_alloc_info;
+		return -ENOMEM;
 	}
 
 	host = to_imxfb_host(fb_info);
 
-	host->base = ioremap(res->start, resource_size(res));
-	if (!host->base) {
+	host->base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(host->base)) {
 		dev_err(&pdev->dev, "ioremap failed\n");
-		ret = -ENOMEM;
-		goto error_ioremap;
+		ret = PTR_ERR(host->base);
+		goto fb_release;
 	}
 
 	host->pdev = pdev;
@@ -829,47 +912,31 @@ static int mxsfb_probe(struct platform_device *pdev)
 	pinctrl = devm_pinctrl_get_select_default(&pdev->dev);
 	if (IS_ERR(pinctrl)) {
 		ret = PTR_ERR(pinctrl);
-		goto error_getpin;
+		goto fb_release;
 	}
 
-	host->clk = clk_get(&host->pdev->dev, NULL);
+	host->clk = devm_clk_get(&host->pdev->dev, NULL);
 	if (IS_ERR(host->clk)) {
 		ret = PTR_ERR(host->clk);
-		goto error_getclock;
+		goto fb_release;
 	}
 
-	panel_enable = of_get_named_gpio_flags(pdev->dev.of_node,
-					       "panel-enable-gpios", 0, &flags);
-	if (gpio_is_valid(panel_enable)) {
-		unsigned long f = GPIOF_OUT_INIT_HIGH;
-		if (flags == OF_GPIO_ACTIVE_LOW)
-			f = GPIOF_OUT_INIT_LOW;
-		ret = devm_gpio_request_one(&pdev->dev, panel_enable,
-					    f, "panel-enable");
-		if (ret) {
-			dev_err(&pdev->dev,
-				"failed to request gpio %d: %d\n",
-				panel_enable, ret);
-			goto error_panel_enable;
-		}
-	}
+	host->reg_lcd = devm_regulator_get(&pdev->dev, "lcd");
+	if (IS_ERR(host->reg_lcd))
+		host->reg_lcd = NULL;
 
-	fb_info->pseudo_palette = kmalloc(sizeof(u32) * 16, GFP_KERNEL);
+	fb_info->pseudo_palette = devm_kzalloc(&pdev->dev, sizeof(u32) * 16,
+					       GFP_KERNEL);
 	if (!fb_info->pseudo_palette) {
 		ret = -ENOMEM;
-		goto error_pseudo_pallette;
+		goto fb_release;
 	}
 
 	INIT_LIST_HEAD(&fb_info->modelist);
 
-	host->sync = pdata->sync;
-
 	ret = mxsfb_init_fbinfo(host);
 	if (ret != 0)
-		goto error_init_fb;
-
-	for (i = 0; i < pdata->mode_count; i++)
-		fb_add_videomode(&pdata->mode_list[i], &fb_info->modelist);
+		goto fb_release;
 
 	modelist = list_first_entry(&fb_info->modelist,
 			struct fb_modelist, list);
@@ -883,7 +950,7 @@ static int mxsfb_probe(struct platform_device *pdev)
 	ret = register_framebuffer(fb_info);
 	if (ret != 0) {
 		dev_err(&pdev->dev,"Failed to register framebuffer\n");
-		goto error_register;
+		goto fb_destroy;
 	}
 
 	if (!host->enabled) {
@@ -896,22 +963,12 @@ static int mxsfb_probe(struct platform_device *pdev)
 
 	return 0;
 
-error_register:
+fb_destroy:
 	if (host->enabled)
 		clk_disable_unprepare(host->clk);
 	fb_destroy_modelist(&fb_info->modelist);
-error_init_fb:
-	kfree(fb_info->pseudo_palette);
-error_pseudo_pallette:
-error_panel_enable:
-	clk_put(host->clk);
-error_getclock:
-error_getpin:
-	iounmap(host->base);
-error_ioremap:
+fb_release:
 	framebuffer_release(fb_info);
-error_alloc_info:
-	release_mem_region(res->start, resource_size(res));
 
 	return ret;
 }
@@ -920,19 +977,14 @@ static int mxsfb_remove(struct platform_device *pdev)
 {
 	struct fb_info *fb_info = platform_get_drvdata(pdev);
 	struct mxsfb_info *host = to_imxfb_host(fb_info);
-	struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 
 	if (host->enabled)
 		mxsfb_disable_controller(fb_info);
 
 	unregister_framebuffer(fb_info);
-	kfree(fb_info->pseudo_palette);
 	mxsfb_free_videomem(host);
-	iounmap(host->base);
-	clk_put(host->clk);
 
 	framebuffer_release(fb_info);
-	release_mem_region(res->start, resource_size(res));
 
 	platform_set_drvdata(pdev, NULL);
 
diff --git a/include/linux/mxsfb.h b/include/linux/mxsfb.h
deleted file mode 100644
index f80af867434..00000000000
--- a/include/linux/mxsfb.h
+++ /dev/null
@@ -1,52 +0,0 @@
-/*
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#ifndef __LINUX_MXSFB_H
-#define __LINUX_MXSFB_H
-
-#include <linux/fb.h>
-
-#define STMLCDIF_8BIT 1	/** pixel data bus to the display is of 8 bit width */
-#define STMLCDIF_16BIT 0 /** pixel data bus to the display is of 16 bit width */
-#define STMLCDIF_18BIT 2 /** pixel data bus to the display is of 18 bit width */
-#define STMLCDIF_24BIT 3 /** pixel data bus to the display is of 24 bit width */
-
-#define MXSFB_SYNC_DATA_ENABLE_HIGH_ACT	(1 << 6)
-#define MXSFB_SYNC_DOTCLK_FAILING_ACT	(1 << 7) /* failing/negtive edge sampling */
-
-struct mxsfb_platform_data {
-	struct fb_videomode *mode_list;
-	unsigned mode_count;
-
-	unsigned default_bpp;
-
-	unsigned dotclk_delay;	/* refer manual HW_LCDIF_VDCTRL4 register */
-	unsigned ld_intf_width;	/* refer STMLCDIF_* macros */
-
-	unsigned fb_size;	/* Size of the video memory. If zero a
-				 * default will be used
-				 */
-	unsigned long fb_phys;	/* physical address for the video memory. If
-				 * zero the framebuffer memory will be dynamically
-				 * allocated. If specified,fb_size must also be specified.
-				 * fb_phys must be unused by Linux.
-				 */
-	u32 sync;		/* sync mask, contains MXSFB specifics not
-				 * carried in fb_info->var.sync
-				 */
-};
-
-#endif /* __LINUX_MXSFB_H */
diff --git a/include/linux/spi/mxs-spi.h b/include/linux/spi/mxs-spi.h
index 61ae1306db2..4835486f58e 100644
--- a/include/linux/spi/mxs-spi.h
+++ b/include/linux/spi/mxs-spi.h
@@ -24,7 +24,7 @@
 #ifndef __LINUX_SPI_MXS_SPI_H__
 #define __LINUX_SPI_MXS_SPI_H__
 
-#include <linux/fsl/mxs-dma.h>
+#include <linux/dmaengine.h>
 
 #define ssp_is_old(host)	((host)->devid == IMX23_SSP)
 
@@ -137,9 +137,7 @@ struct mxs_ssp {
 	unsigned int			clk_rate;
 	enum mxs_ssp_id			devid;
 
-	int				dma_channel;
 	struct dma_chan			*dmach;
-	struct mxs_dma_data		dma_data;
 	unsigned int			dma_dir;
 	enum dma_transfer_direction	slave_dirn;
 	u32				ssp_pio_words[SSP_PIO_NUM];