hwmon: (lm80) fix checkpatch messages

Fixed all checkpatch messages except
simple_strto* -> kstr*
This will be addressed in a separate patch

Also left one line-too-long message as it was only a
little bit too long and would become less readable

compile-tested: no warnings or errors

Signed-off-by: Frans Meulenbroeks <fransmeulenbroeks@gmail.com>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>

1 files changed, 42 insertions, 28 deletions

diff --git a/drivers/hwmon/lm80.c b/drivers/hwmon/lm80.c
index 18a0e6c5fe8..0891b38ffec 100644
--- a/drivers/hwmon/lm80.c
+++ b/drivers/hwmon/lm80.c
@@ -66,19 +66,19 @@ static const unsigned short normal_i2c[] = { 0x28, 0x29, 0x2a, 0x2b, 0x2c, 0x2d,
    these macros are called: arguments may be evaluated more than once.
    Fixing this is just not worth it. */
 
-#define IN_TO_REG(val)		(SENSORS_LIMIT(((val)+5)/10,0,255))
-#define IN_FROM_REG(val)	((val)*10)
+#define IN_TO_REG(val)		(SENSORS_LIMIT(((val) + 5) / 10, 0, 255))
+#define IN_FROM_REG(val)	((val) * 10)
 
 static inline unsigned char FAN_TO_REG(unsigned rpm, unsigned div)
 {
 	if (rpm == 0)
 		return 255;
 	rpm = SENSORS_LIMIT(rpm, 1, 1000000);
-	return SENSORS_LIMIT((1350000 + rpm*div / 2) / (rpm*div), 1, 254);
+	return SENSORS_LIMIT((1350000 + rpm * div / 2) / (rpm * div), 1, 254);
 }
 
-#define FAN_FROM_REG(val,div)	((val)==0?-1:\
-				(val)==255?0:1350000/((div)*(val)))
+#define FAN_FROM_REG(val, div)	((val) == 0 ? -1 : \
+				(val) == 255 ? 0 : 1350000/((div) * (val)))
 
 static inline long TEMP_FROM_REG(u16 temp)
 {
@@ -93,10 +93,11 @@ static inline long TEMP_FROM_REG(u16 temp)
 	return res / 10;
 }
 
-#define TEMP_LIMIT_FROM_REG(val)	(((val)>0x80?(val)-0x100:(val))*1000)
+#define TEMP_LIMIT_FROM_REG(val)	(((val) > 0x80 ? \
+	(val) - 0x100 : (val)) * 1000)
 
-#define TEMP_LIMIT_TO_REG(val)		SENSORS_LIMIT((val)<0?\
-					((val)-500)/1000:((val)+500)/1000,0,255)
+#define TEMP_LIMIT_TO_REG(val)		SENSORS_LIMIT((val) < 0 ? \
+	((val) - 500) / 1000 : ((val) + 500) / 1000, 0, 255)
 
 #define DIV_FROM_REG(val)		(1 << (val))
 
@@ -164,7 +165,8 @@ static struct i2c_driver lm80_driver = {
  */
 
 #define show_in(suffix, value) \
-static ssize_t show_in_##suffix(struct device *dev, struct device_attribute *attr, char *buf) \
+static ssize_t show_in_##suffix(struct device *dev, \
+	struct device_attribute *attr, char *buf) \
 { \
 	int nr = to_sensor_dev_attr(attr)->index; \
 	struct lm80_data *data = lm80_update_device(dev); \
@@ -175,14 +177,14 @@ show_in(max, in_max)
 show_in(input, in)
 
 #define set_in(suffix, value, reg) \
-static ssize_t set_in_##suffix(struct device *dev, struct device_attribute *attr, const char *buf, \
-	size_t count) \
+static ssize_t set_in_##suffix(struct device *dev, \
+	struct device_attribute *attr, const char *buf, size_t count) \
 { \
 	int nr = to_sensor_dev_attr(attr)->index; \
 	struct i2c_client *client = to_i2c_client(dev); \
 	struct lm80_data *data = i2c_get_clientdata(client); \
 	long val = simple_strtol(buf, NULL, 10); \
- \
+\
 	mutex_lock(&data->update_lock);\
 	data->value[nr] = IN_TO_REG(val); \
 	lm80_write_value(client, reg(nr), data->value[nr]); \
@@ -193,7 +195,8 @@ set_in(min, in_min, LM80_REG_IN_MIN)
 set_in(max, in_max, LM80_REG_IN_MAX)
 
 #define show_fan(suffix, value) \
-static ssize_t show_fan_##suffix(struct device *dev, struct device_attribute *attr, char *buf) \
+static ssize_t show_fan_##suffix(struct device *dev, \
+	struct device_attribute *attr, char *buf) \
 { \
 	int nr = to_sensor_dev_attr(attr)->index; \
 	struct lm80_data *data = lm80_update_device(dev); \
@@ -245,10 +248,18 @@ static ssize_t set_fan_div(struct device *dev, struct device_attribute *attr,
 			   DIV_FROM_REG(data->fan_div[nr]));
 
 	switch (val) {
-	case 1: data->fan_div[nr] = 0; break;
-	case 2: data->fan_div[nr] = 1; break;
-	case 4: data->fan_div[nr] = 2; break;
-	case 8: data->fan_div[nr] = 3; break;
+	case 1:
+		data->fan_div[nr] = 0;
+		break;
+	case 2:
+		data->fan_div[nr] = 1;
+		break;
+	case 4:
+		data->fan_div[nr] = 2;
+		break;
+	case 8:
+		data->fan_div[nr] = 3;
+		break;
 	default:
 		dev_err(&client->dev, "fan_div value %ld not "
 			"supported. Choose one of 1, 2, 4 or 8!\n", val);
@@ -268,14 +279,16 @@ static ssize_t set_fan_div(struct device *dev, struct device_attribute *attr,
 	return count;
 }
 
-static ssize_t show_temp_input1(struct device *dev, struct device_attribute *attr, char *buf)
+static ssize_t show_temp_input1(struct device *dev,
+	struct device_attribute *attr, char *buf)
 {
 	struct lm80_data *data = lm80_update_device(dev);
 	return sprintf(buf, "%ld\n", TEMP_FROM_REG(data->temp));
 }
 
 #define show_temp(suffix, value) \
-static ssize_t show_temp_##suffix(struct device *dev, struct device_attribute *attr, char *buf) \
+static ssize_t show_temp_##suffix(struct device *dev, \
+	struct device_attribute *attr, char *buf) \
 { \
 	struct lm80_data *data = lm80_update_device(dev); \
 	return sprintf(buf, "%d\n", TEMP_LIMIT_FROM_REG(data->value)); \
@@ -286,13 +299,13 @@ show_temp(os_max, temp_os_max);
 show_temp(os_hyst, temp_os_hyst);
 
 #define set_temp(suffix, value, reg) \
-static ssize_t set_temp_##suffix(struct device *dev, struct device_attribute *attr, const char *buf, \
-	size_t count) \
+static ssize_t set_temp_##suffix(struct device *dev, \
+	struct device_attribute *attr, const char *buf, size_t count) \
 { \
 	struct i2c_client *client = to_i2c_client(dev); \
 	struct lm80_data *data = i2c_get_clientdata(client); \
 	long val = simple_strtoul(buf, NULL, 10); \
- \
+\
 	mutex_lock(&data->update_lock); \
 	data->value = TEMP_LIMIT_TO_REG(val); \
 	lm80_write_value(client, reg, data->value); \
@@ -366,13 +379,13 @@ static SENSOR_DEVICE_ATTR(fan2_div, S_IWUSR | S_IRUGO,
 		show_fan_div, set_fan_div, 1);
 static DEVICE_ATTR(temp1_input, S_IRUGO, show_temp_input1, NULL);
 static DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO, show_temp_hot_max,
-    set_temp_hot_max);
+	set_temp_hot_max);
 static DEVICE_ATTR(temp1_max_hyst, S_IWUSR | S_IRUGO, show_temp_hot_hyst,
-    set_temp_hot_hyst);
+	set_temp_hot_hyst);
 static DEVICE_ATTR(temp1_crit, S_IWUSR | S_IRUGO, show_temp_os_max,
-    set_temp_os_max);
+	set_temp_os_max);
 static DEVICE_ATTR(temp1_crit_hyst, S_IWUSR | S_IRUGO, show_temp_os_hyst,
-    set_temp_os_hyst);
+	set_temp_os_hyst);
 static DEVICE_ATTR(alarms, S_IRUGO, show_alarms, NULL);
 static SENSOR_DEVICE_ATTR(in0_alarm, S_IRUGO, show_alarm, NULL, 0);
 static SENSOR_DEVICE_ATTR(in1_alarm, S_IRUGO, show_alarm, NULL, 1);
@@ -459,7 +472,7 @@ static int lm80_detect(struct i2c_client *client, struct i2c_board_info *info)
 		if ((i2c_smbus_read_byte_data(client, i + 0x40) != cur)
 		 || (i2c_smbus_read_byte_data(client, i + 0x80) != cur)
 		 || (i2c_smbus_read_byte_data(client, i + 0xc0) != cur))
-		    return -ENODEV;
+			return -ENODEV;
 	}
 
 	strlcpy(info->type, "lm80", I2C_NAME_SIZE);
@@ -490,7 +503,8 @@ static int lm80_probe(struct i2c_client *client,
 	data->fan_min[1] = lm80_read_value(client, LM80_REG_FAN_MIN(2));
 
 	/* Register sysfs hooks */
-	if ((err = sysfs_create_group(&client->dev.kobj, &lm80_group)))
+	err = sysfs_create_group(&client->dev.kobj, &lm80_group);
+	if (err)
 		goto error_free;
 
 	data->hwmon_dev = hwmon_device_register(&client->dev);