summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2012-01-09 14:38:51 -0800
committerLinus Torvalds <torvalds@linux-foundation.org>2012-01-09 14:38:51 -0800
commit5ede3ceb7b2c2843e153a1803edbdc8c56655950 (patch)
tree4cfa82b619f7d39b671e4a2a213f4d040b09c486
parent6d889d03ab1417645e76e129834f76204bae37c0 (diff)
parent3e2762c8f1141ae8dc708034ea41d6827818c328 (diff)
Merge tag 'devel' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
New feature development This adds support for new features, and contains stuff from most platforms. A number of these patches could have fit into other branches, too, but were small enough not to cause too much confusion here. * tag 'devel' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (28 commits) mfd/db8500-prcmu: remove support for early silicon revisions ARM: ux500: fix the smp_twd clock calculation ARM: ux500: remove support for early silicon revisions ARM: ux500: update register files ARM: ux500: register DB5500 PMU dynamically ARM: ux500: update ASIC detection for U5500 ARM: ux500: support DB8520 ARM: picoxcell: implement watchdog restart ARM: OMAP3+: hwmod data: Add the default clockactivity for I2C ARM: OMAP3: hwmod data: disable multiblock reads on MMC1/2 on OMAP34xx/35xx <= ES2.1 ARM: OMAP: USB: EHCI and OHCI hwmod structures for OMAP4 ARM: OMAP: USB: EHCI and OHCI hwmod structures for OMAP3 ARM: OMAP: hwmod data: Add support for AM35xx UART4/ttyO3 ARM: Orion: Remove address map info from all platform data structures ARM: Orion: Get address map from plat-orion instead of via platform_data ARM: Orion: mbus_dram_info consolidation ARM: Orion: Consolidate the address map setup ARM: Kirkwood: Add configuration for MPP12 as GPIO ARM: Kirkwood: Recognize A1 revision of 6282 chip ARM: ux500: update the MOP500 GPIO assignments ...
-rw-r--r--arch/arm/boot/dts/highbank.dts12
-rw-r--r--arch/arm/configs/omap1_defconfig1
-rw-r--r--arch/arm/mach-davinci/clock.c13
-rw-r--r--arch/arm/mach-davinci/clock.h10
-rw-r--r--arch/arm/mach-davinci/dm644x.c4
-rw-r--r--arch/arm/mach-dove/addr-map.c121
-rw-r--r--arch/arm/mach-dove/common.c16
-rw-r--r--arch/arm/mach-dove/common.h1
-rw-r--r--arch/arm/mach-dove/pcie.c4
-rw-r--r--arch/arm/mach-kirkwood/addr-map.c137
-rw-r--r--arch/arm/mach-kirkwood/common.c19
-rw-r--r--arch/arm/mach-kirkwood/common.h1
-rw-r--r--arch/arm/mach-kirkwood/include/mach/kirkwood.h1
-rw-r--r--arch/arm/mach-kirkwood/mpp.c1
-rw-r--r--arch/arm/mach-kirkwood/mpp.h1
-rw-r--r--arch/arm/mach-kirkwood/pcie.c4
-rw-r--r--arch/arm/mach-mv78xx0/addr-map.c102
-rw-r--r--arch/arm/mach-mv78xx0/common.c22
-rw-r--r--arch/arm/mach-mv78xx0/common.h1
-rw-r--r--arch/arm/mach-mv78xx0/mpp.c1
-rw-r--r--arch/arm/mach-mv78xx0/pcie.c4
-rw-r--r--arch/arm/mach-omap1/Kconfig64
-rw-r--r--arch/arm/mach-omap1/clock.c14
-rw-r--r--arch/arm/mach-omap1/clock.h3
-rw-r--r--arch/arm/mach-omap1/clock_data.c19
-rw-r--r--arch/arm/mach-omap1/opp.h1
-rw-r--r--arch/arm/mach-omap1/opp_data.c63
-rw-r--r--arch/arm/mach-omap2/clock3xxx_data.c11
-rw-r--r--arch/arm/mach-omap2/omap_hwmod_3xxx_data.c374
-rw-r--r--arch/arm/mach-omap2/omap_hwmod_44xx_data.c217
-rw-r--r--arch/arm/mach-omap2/prcm-common.h2
-rw-r--r--arch/arm/mach-orion5x/addr-map.c146
-rw-r--r--arch/arm/mach-orion5x/common.c23
-rw-r--r--arch/arm/mach-orion5x/common.h3
-rw-r--r--arch/arm/mach-orion5x/include/mach/orion5x.h2
-rw-r--r--arch/arm/mach-orion5x/mpp.c1
-rw-r--r--arch/arm/mach-orion5x/pci.c5
-rw-r--r--arch/arm/mach-picoxcell/common.c37
-rw-r--r--arch/arm/mach-ux500/board-mop500-sdi.c88
-rw-r--r--arch/arm/mach-ux500/board-mop500.c2
-rw-r--r--arch/arm/mach-ux500/board-mop500.h63
-rw-r--r--arch/arm/mach-ux500/clock.c207
-rw-r--r--arch/arm/mach-ux500/cpu-db5500.c41
-rw-r--r--arch/arm/mach-ux500/cpu-db8500.c30
-rw-r--r--arch/arm/mach-ux500/devices-db8500.c10
-rw-r--r--arch/arm/mach-ux500/id.c6
-rw-r--r--arch/arm/mach-ux500/include/mach/db5500-regs.h4
-rw-r--r--arch/arm/mach-ux500/include/mach/db8500-regs.h20
-rw-r--r--arch/arm/mach-ux500/include/mach/devices.h2
-rw-r--r--arch/arm/mach-ux500/include/mach/hardware.h10
-rw-r--r--arch/arm/mach-ux500/include/mach/id.h24
-rw-r--r--arch/arm/plat-omap/include/plat/clkdev_omap.h1
-rw-r--r--arch/arm/plat-omap/include/plat/irqs.h2
-rw-r--r--arch/arm/plat-omap/include/plat/serial.h1
-rw-r--r--arch/arm/plat-omap/sram.c9
-rw-r--r--arch/arm/plat-orion/Makefile2
-rw-r--r--arch/arm/plat-orion/addr-map.c174
-rw-r--r--arch/arm/plat-orion/common.c43
-rw-r--r--arch/arm/plat-orion/include/plat/addr-map.h53
-rw-r--r--arch/arm/plat-orion/include/plat/audio.h3
-rw-r--r--arch/arm/plat-orion/include/plat/common.h17
-rw-r--r--arch/arm/plat-orion/include/plat/ehci-orion.h1
-rw-r--r--arch/arm/plat-orion/include/plat/mv_xor.h6
-rw-r--r--arch/arm/plat-orion/include/plat/mvsdio.h1
-rw-r--r--arch/arm/plat-orion/include/plat/pcie.h3
-rw-r--r--arch/arm/plat-orion/pcie.c6
-rw-r--r--drivers/ata/sata_mv.c19
-rw-r--r--drivers/dma/mv_xor.c11
-rw-r--r--drivers/mfd/db8500-prcmu.c7
-rw-r--r--drivers/mmc/host/mvsdio.c13
-rw-r--r--drivers/net/ethernet/marvell/mv643xx_eth.c10
-rw-r--r--drivers/usb/host/ehci-orion.c10
-rw-r--r--include/linux/ata_platform.h3
-rw-r--r--include/linux/mbus.h13
-rw-r--r--sound/soc/kirkwood/kirkwood-dma.c15
75 files changed, 1430 insertions, 961 deletions
diff --git a/arch/arm/boot/dts/highbank.dts b/arch/arm/boot/dts/highbank.dts
index aeb1a7578fa..305635bd45c 100644
--- a/arch/arm/boot/dts/highbank.dts
+++ b/arch/arm/boot/dts/highbank.dts
@@ -194,5 +194,17 @@
reg = <0xfff3d000 0x1000>;
interrupts = <0 92 4>;
};
+
+ ethernet@fff50000 {
+ compatible = "calxeda,hb-xgmac";
+ reg = <0xfff50000 0x1000>;
+ interrupts = <0 77 4 0 78 4 0 79 4>;
+ };
+
+ ethernet@fff51000 {
+ compatible = "calxeda,hb-xgmac";
+ reg = <0xfff51000 0x1000>;
+ interrupts = <0 80 4 0 81 4 0 82 4>;
+ };
};
};
diff --git a/arch/arm/configs/omap1_defconfig b/arch/arm/configs/omap1_defconfig
index 945a34f2a34..dde2a1af7b3 100644
--- a/arch/arm/configs/omap1_defconfig
+++ b/arch/arm/configs/omap1_defconfig
@@ -48,7 +48,6 @@ CONFIG_MACH_SX1=y
CONFIG_MACH_NOKIA770=y
CONFIG_MACH_AMS_DELTA=y
CONFIG_MACH_OMAP_GENERIC=y
-CONFIG_OMAP_ARM_182MHZ=y
# CONFIG_ARM_THUMB is not set
CONFIG_PCCARD=y
CONFIG_OMAP_CF=y
diff --git a/arch/arm/mach-davinci/clock.c b/arch/arm/mach-davinci/clock.c
index 00861139101..008772e3b84 100644
--- a/arch/arm/mach-davinci/clock.c
+++ b/arch/arm/mach-davinci/clock.c
@@ -31,19 +31,12 @@ static LIST_HEAD(clocks);
static DEFINE_MUTEX(clocks_mutex);
static DEFINE_SPINLOCK(clockfw_lock);
-static unsigned psc_domain(struct clk *clk)
-{
- return (clk->flags & PSC_DSP)
- ? DAVINCI_GPSC_DSPDOMAIN
- : DAVINCI_GPSC_ARMDOMAIN;
-}
-
static void __clk_enable(struct clk *clk)
{
if (clk->parent)
__clk_enable(clk->parent);
if (clk->usecount++ == 0 && (clk->flags & CLK_PSC))
- davinci_psc_config(psc_domain(clk), clk->gpsc, clk->lpsc,
+ davinci_psc_config(clk->domain, clk->gpsc, clk->lpsc,
true, clk->flags);
}
@@ -53,7 +46,7 @@ static void __clk_disable(struct clk *clk)
return;
if (--clk->usecount == 0 && !(clk->flags & CLK_PLL) &&
(clk->flags & CLK_PSC))
- davinci_psc_config(psc_domain(clk), clk->gpsc, clk->lpsc,
+ davinci_psc_config(clk->domain, clk->gpsc, clk->lpsc,
false, clk->flags);
if (clk->parent)
__clk_disable(clk->parent);
@@ -237,7 +230,7 @@ static int __init clk_disable_unused(void)
pr_debug("Clocks: disable unused %s\n", ck->name);
- davinci_psc_config(psc_domain(ck), ck->gpsc, ck->lpsc,
+ davinci_psc_config(ck->domain, ck->gpsc, ck->lpsc,
false, ck->flags);
}
spin_unlock_irq(&clockfw_lock);
diff --git a/arch/arm/mach-davinci/clock.h b/arch/arm/mach-davinci/clock.h
index a705f367a84..46f0f1bf1a4 100644
--- a/arch/arm/mach-davinci/clock.h
+++ b/arch/arm/mach-davinci/clock.h
@@ -93,6 +93,7 @@ struct clk {
u8 usecount;
u8 lpsc;
u8 gpsc;
+ u8 domain;
u32 flags;
struct clk *parent;
struct list_head children; /* list of children */
@@ -107,11 +108,10 @@ struct clk {
/* Clock flags: SoC-specific flags start at BIT(16) */
#define ALWAYS_ENABLED BIT(1)
#define CLK_PSC BIT(2)
-#define PSC_DSP BIT(3) /* PSC uses DSP domain, not ARM */
-#define CLK_PLL BIT(4) /* PLL-derived clock */
-#define PRE_PLL BIT(5) /* source is before PLL mult/div */
-#define PSC_SWRSTDISABLE BIT(6) /* Disable state is SwRstDisable */
-#define PSC_FORCE BIT(7) /* Force module state transtition */
+#define CLK_PLL BIT(3) /* PLL-derived clock */
+#define PRE_PLL BIT(4) /* source is before PLL mult/div */
+#define PSC_SWRSTDISABLE BIT(5) /* Disable state is SwRstDisable */
+#define PSC_FORCE BIT(6) /* Force module state transtition */
#define CLK(dev, con, ck) \
{ \
diff --git a/arch/arm/mach-davinci/dm644x.c b/arch/arm/mach-davinci/dm644x.c
index 0800f9cf33b..43a48ee1917 100644
--- a/arch/arm/mach-davinci/dm644x.c
+++ b/arch/arm/mach-davinci/dm644x.c
@@ -130,7 +130,7 @@ static struct clk dsp_clk = {
.name = "dsp",
.parent = &pll1_sysclk1,
.lpsc = DAVINCI_LPSC_GEM,
- .flags = PSC_DSP,
+ .domain = DAVINCI_GPSC_DSPDOMAIN,
.usecount = 1, /* REVISIT how to disable? */
};
@@ -145,7 +145,7 @@ static struct clk vicp_clk = {
.name = "vicp",
.parent = &pll1_sysclk2,
.lpsc = DAVINCI_LPSC_IMCOP,
- .flags = PSC_DSP,
+ .domain = DAVINCI_GPSC_DSPDOMAIN,
.usecount = 1, /* REVISIT how to disable? */
};
diff --git a/arch/arm/mach-dove/addr-map.c b/arch/arm/mach-dove/addr-map.c
index 00be4fc26dd..98b8c83b09a 100644
--- a/arch/arm/mach-dove/addr-map.c
+++ b/arch/arm/mach-dove/addr-map.c
@@ -14,6 +14,7 @@
#include <linux/io.h>
#include <asm/mach/arch.h>
#include <asm/setup.h>
+#include <plat/addr-map.h>
#include "common.h"
/*
@@ -34,98 +35,72 @@
#define ATTR_PCIE_MEM 0xe8
#define ATTR_SCRATCHPAD 0x0
-/*
- * CPU Address Decode Windows registers
- */
-#define WIN_CTRL(n) (BRIDGE_VIRT_BASE + ((n) << 4) + 0x0)
-#define WIN_BASE(n) (BRIDGE_VIRT_BASE + ((n) << 4) + 0x4)
-#define WIN_REMAP_LO(n) (BRIDGE_VIRT_BASE + ((n) << 4) + 0x8)
-#define WIN_REMAP_HI(n) (BRIDGE_VIRT_BASE + ((n) << 4) + 0xc)
-
-struct mbus_dram_target_info dove_mbus_dram_info;
-
static inline void __iomem *ddr_map_sc(int i)
{
return (void __iomem *)(DOVE_MC_VIRT_BASE + 0x100 + ((i) << 4));
}
-static int cpu_win_can_remap(int win)
-{
- if (win < 4)
- return 1;
-
- return 0;
-}
-
-static void __init setup_cpu_win(int win, u32 base, u32 size,
- u8 target, u8 attr, int remap)
-{
- u32 ctrl;
-
- base &= 0xffff0000;
- ctrl = ((size - 1) & 0xffff0000) | (attr << 8) | (target << 4) | 1;
-
- writel(base, WIN_BASE(win));
- writel(ctrl, WIN_CTRL(win));
- if (cpu_win_can_remap(win)) {
- if (remap < 0)
- remap = base;
- writel(remap & 0xffff0000, WIN_REMAP_LO(win));
- writel(0, WIN_REMAP_HI(win));
- }
-}
-
-void __init dove_setup_cpu_mbus(void)
-{
- int i;
- int cs;
+/*
+ * Description of the windows needed by the platform code
+ */
+static struct __initdata orion_addr_map_cfg addr_map_cfg = {
+ .num_wins = 8,
+ .remappable_wins = 4,
+ .bridge_virt_base = BRIDGE_VIRT_BASE,
+};
+static const struct __initdata orion_addr_map_info addr_map_info[] = {
/*
- * First, disable and clear windows.
+ * Windows for PCIe IO+MEM space.
*/
- for (i = 0; i < 8; i++) {
- writel(0, WIN_BASE(i));
- writel(0, WIN_CTRL(i));
- if (cpu_win_can_remap(i)) {
- writel(0, WIN_REMAP_LO(i));
- writel(0, WIN_REMAP_HI(i));
- }
- }
-
+ { 0, DOVE_PCIE0_IO_PHYS_BASE, DOVE_PCIE0_IO_SIZE,
+ TARGET_PCIE0, ATTR_PCIE_IO, DOVE_PCIE0_IO_BUS_BASE
+ },
+ { 1, DOVE_PCIE1_IO_PHYS_BASE, DOVE_PCIE1_IO_SIZE,
+ TARGET_PCIE1, ATTR_PCIE_IO, DOVE_PCIE1_IO_BUS_BASE
+ },
+ { 2, DOVE_PCIE0_MEM_PHYS_BASE, DOVE_PCIE0_MEM_SIZE,
+ TARGET_PCIE0, ATTR_PCIE_MEM, -1
+ },
+ { 3, DOVE_PCIE1_MEM_PHYS_BASE, DOVE_PCIE1_MEM_SIZE,
+ TARGET_PCIE1, ATTR_PCIE_MEM, -1
+ },
/*
- * Setup windows for PCIe IO+MEM space.
+ * Window for CESA engine.
*/
- setup_cpu_win(0, DOVE_PCIE0_IO_PHYS_BASE, DOVE_PCIE0_IO_SIZE,
- TARGET_PCIE0, ATTR_PCIE_IO, DOVE_PCIE0_IO_BUS_BASE);
- setup_cpu_win(1, DOVE_PCIE1_IO_PHYS_BASE, DOVE_PCIE1_IO_SIZE,
- TARGET_PCIE1, ATTR_PCIE_IO, DOVE_PCIE1_IO_BUS_BASE);
- setup_cpu_win(2, DOVE_PCIE0_MEM_PHYS_BASE, DOVE_PCIE0_MEM_SIZE,
- TARGET_PCIE0, ATTR_PCIE_MEM, -1);
- setup_cpu_win(3, DOVE_PCIE1_MEM_PHYS_BASE, DOVE_PCIE1_MEM_SIZE,
- TARGET_PCIE1, ATTR_PCIE_MEM, -1);
-
+ { 4, DOVE_CESA_PHYS_BASE, DOVE_CESA_SIZE,
+ TARGET_CESA, ATTR_CESA, -1
+ },
/*
- * Setup window for CESA engine.
+ * Window to the BootROM for Standby and Sleep Resume
*/
- setup_cpu_win(4, DOVE_CESA_PHYS_BASE, DOVE_CESA_SIZE,
- TARGET_CESA, ATTR_CESA, -1);
-
+ { 5, DOVE_BOOTROM_PHYS_BASE, DOVE_BOOTROM_SIZE,
+ TARGET_BOOTROM, ATTR_BOOTROM, -1
+ },
/*
- * Setup the Window to the BootROM for Standby and Sleep Resume
+ * Window to the PMU Scratch Pad space
*/
- setup_cpu_win(5, DOVE_BOOTROM_PHYS_BASE, DOVE_BOOTROM_SIZE,
- TARGET_BOOTROM, ATTR_BOOTROM, -1);
+ { 6, DOVE_SCRATCHPAD_PHYS_BASE, DOVE_SCRATCHPAD_SIZE,
+ TARGET_SCRATCHPAD, ATTR_SCRATCHPAD, -1
+ },
+ /* End marker */
+ { -1, 0, 0, 0, 0, 0 }
+};
+
+void __init dove_setup_cpu_mbus(void)
+{
+ int i;
+ int cs;
/*
- * Setup the Window to the PMU Scratch Pad space
+ * Disable, clear and configure windows.
*/
- setup_cpu_win(6, DOVE_SCRATCHPAD_PHYS_BASE, DOVE_SCRATCHPAD_SIZE,
- TARGET_SCRATCHPAD, ATTR_SCRATCHPAD, -1);
+ orion_config_wins(&addr_map_cfg, addr_map_info);
/*
* Setup MBUS dram target info.
*/
- dove_mbus_dram_info.mbus_dram_target_id = TARGET_DDR;
+ orion_mbus_dram_info.mbus_dram_target_id = TARGET_DDR;
for (i = 0, cs = 0; i < 2; i++) {
u32 map = readl(ddr_map_sc(i));
@@ -136,7 +111,7 @@ void __init dove_setup_cpu_mbus(void)
if (map & 1) {
struct mbus_dram_window *w;
- w = &dove_mbus_dram_info.cs[cs++];
+ w = &orion_mbus_dram_info.cs[cs++];
w->cs_index = i;
w->mbus_attr = 0; /* CS address decoding done inside */
/* the DDR controller, no need to */
@@ -145,5 +120,5 @@ void __init dove_setup_cpu_mbus(void)
w->size = 0x100000 << (((map & 0x000f0000) >> 16) - 4);
}
}
- dove_mbus_dram_info.num_cs = cs;
+ orion_mbus_dram_info.num_cs = cs;
}
diff --git a/arch/arm/mach-dove/common.c b/arch/arm/mach-dove/common.c
index 13bb236cd0c..dd1429ae640 100644
--- a/arch/arm/mach-dove/common.c
+++ b/arch/arm/mach-dove/common.c
@@ -14,7 +14,6 @@
#include <linux/platform_device.h>
#include <linux/pci.h>
#include <linux/clk.h>
-#include <linux/mbus.h>
#include <linux/ata_platform.h>
#include <linux/gpio.h>
#include <asm/page.h>
@@ -30,6 +29,7 @@
#include <linux/irq.h>
#include <plat/time.h>
#include <plat/common.h>
+#include <plat/addr-map.h>
#include "common.h"
static int get_tclk(void);
@@ -71,8 +71,7 @@ void __init dove_map_io(void)
****************************************************************************/
void __init dove_ehci0_init(void)
{
- orion_ehci_init(&dove_mbus_dram_info,
- DOVE_USB0_PHYS_BASE, IRQ_DOVE_USB0);
+ orion_ehci_init(DOVE_USB0_PHYS_BASE, IRQ_DOVE_USB0);
}
/*****************************************************************************
@@ -80,8 +79,7 @@ void __init dove_ehci0_init(void)
****************************************************************************/
void __init dove_ehci1_init(void)
{
- orion_ehci_1_init(&dove_mbus_dram_info,
- DOVE_USB1_PHYS_BASE, IRQ_DOVE_USB1);
+ orion_ehci_1_init(DOVE_USB1_PHYS_BASE, IRQ_DOVE_USB1);
}
/*****************************************************************************
@@ -89,7 +87,7 @@ void __init dove_ehci1_init(void)
****************************************************************************/
void __init dove_ge00_init(struct mv643xx_eth_platform_data *eth_data)
{
- orion_ge00_init(eth_data, &dove_mbus_dram_info,
+ orion_ge00_init(eth_data,
DOVE_GE00_PHYS_BASE, IRQ_DOVE_GE00_SUM,
0, get_tclk());
}
@@ -107,8 +105,7 @@ void __init dove_rtc_init(void)
****************************************************************************/
void __init dove_sata_init(struct mv_sata_platform_data *sata_data)
{
- orion_sata_init(sata_data, &dove_mbus_dram_info,
- DOVE_SATA_PHYS_BASE, IRQ_DOVE_SATA);
+ orion_sata_init(sata_data, DOVE_SATA_PHYS_BASE, IRQ_DOVE_SATA);
}
@@ -198,8 +195,7 @@ struct sys_timer dove_timer = {
****************************************************************************/
void __init dove_xor0_init(void)
{
- orion_xor0_init(&dove_mbus_dram_info,
- DOVE_XOR0_PHYS_BASE, DOVE_XOR0_HIGH_PHYS_BASE,
+ orion_xor0_init(DOVE_XOR0_PHYS_BASE, DOVE_XOR0_HIGH_PHYS_BASE,
IRQ_DOVE_XOR_00, IRQ_DOVE_XOR_01);
}
diff --git a/arch/arm/mach-dove/common.h b/arch/arm/mach-dove/common.h
index 42027305c10..6432a3ba864 100644
--- a/arch/arm/mach-dove/common.h
+++ b/arch/arm/mach-dove/common.h
@@ -15,7 +15,6 @@ struct mv643xx_eth_platform_data;
struct mv_sata_platform_data;
extern struct sys_timer dove_timer;
-extern struct mbus_dram_target_info dove_mbus_dram_info;
/*
* Basic Dove init functions used early by machine-setup.
diff --git a/arch/arm/mach-dove/pcie.c b/arch/arm/mach-dove/pcie.c
index aa2b3a09a51..6c11a4df717 100644
--- a/arch/arm/mach-dove/pcie.c
+++ b/arch/arm/mach-dove/pcie.c
@@ -10,7 +10,6 @@
#include <linux/kernel.h>
#include <linux/pci.h>
-#include <linux/mbus.h>
#include <video/vga.h>
#include <asm/mach/pci.h>
#include <asm/mach/arch.h>
@@ -19,6 +18,7 @@
#include <plat/pcie.h>
#include <mach/irqs.h>
#include <mach/bridge-regs.h>
+#include <plat/addr-map.h>
#include "common.h"
struct pcie_port {
@@ -50,7 +50,7 @@ static int __init dove_pcie_setup(int nr, struct pci_sys_data *sys)
*/
orion_pcie_set_local_bus_nr(pp->base, sys->busnr);
- orion_pcie_setup(pp->base, &dove_mbus_dram_info);
+ orion_pcie_setup(pp->base);
/*
* IORESOURCE_IO
diff --git a/arch/arm/mach-kirkwood/addr-map.c b/arch/arm/mach-kirkwood/addr-map.c
index 8d03bcef518..e9a7180863d 100644
--- a/arch/arm/mach-kirkwood/addr-map.c
+++ b/arch/arm/mach-kirkwood/addr-map.c
@@ -13,12 +13,12 @@
#include <linux/mbus.h>
#include <linux/io.h>
#include <mach/hardware.h>
+#include <plat/addr-map.h>
#include "common.h"
/*
* Generic Address Decode Windows bit settings
*/
-#define TARGET_DDR 0
#define TARGET_DEV_BUS 1
#define TARGET_SRAM 3
#define TARGET_PCIE 4
@@ -36,118 +36,55 @@
#define ATTR_SRAM 0x01
/*
- * Helpers to get DDR bank info
+ * Description of the windows needed by the platform code
*/
-#define DDR_BASE_CS_OFF(n) (0x0000 + ((n) << 3))
-#define DDR_SIZE_CS_OFF(n) (0x0004 + ((n) << 3))
-
-/*
- * CPU Address Decode Windows registers
- */
-#define WIN_OFF(n) (BRIDGE_VIRT_BASE + 0x0000 + ((n) << 4))
-#define WIN_CTRL_OFF 0x0000
-#define WIN_BASE_OFF 0x0004
-#define WIN_REMAP_LO_OFF 0x0008
-#define WIN_REMAP_HI_OFF 0x000c
-
-
-struct mbus_dram_target_info kirkwood_mbus_dram_info;
-
-static int __init cpu_win_can_remap(int win)
-{
- if (win < 4)
- return 1;
-
- return 0;
-}
-
-static void __init setup_cpu_win(int win, u32 base, u32 size,
- u8 target, u8 attr, int remap)
-{
- void __iomem *addr = (void __iomem *)WIN_OFF(win);
- u32 ctrl;
-
- base &= 0xffff0000;
- ctrl = ((size - 1) & 0xffff0000) | (attr << 8) | (target << 4) | 1;
-
- writel(base, addr + WIN_BASE_OFF);
- writel(ctrl, addr + WIN_CTRL_OFF);
- if (cpu_win_can_remap(win)) {
- if (remap < 0)
- remap = base;
-
- writel(remap & 0xffff0000, addr + WIN_REMAP_LO_OFF);
- writel(0, addr + WIN_REMAP_HI_OFF);
- }
-}
-
-void __init kirkwood_setup_cpu_mbus(void)
-{
- void __iomem *addr;
- int i;
- int cs;
+static struct __initdata orion_addr_map_cfg addr_map_cfg = {
+ .num_wins = 8,
+ .remappable_wins = 4,
+ .bridge_virt_base = BRIDGE_VIRT_BASE,
+};
+static const struct __initdata orion_addr_map_info addr_map_info[] = {
/*
- * First, disable and clear windows.
+ * Windows for PCIe IO+MEM space.
*/
- for (i = 0; i < 8; i++) {
- addr = (void __iomem *)WIN_OFF(i);
-
- writel(0, addr + WIN_BASE_OFF);
- writel(0, addr + WIN_CTRL_OFF);
- if (cpu_win_can_remap(i)) {
- writel(0, addr + WIN_REMAP_LO_OFF);
- writel(0, addr + WIN_REMAP_HI_OFF);
- }
- }
-
+ { 0, KIRKWOOD_PCIE_IO_PHYS_BASE, KIRKWOOD_PCIE_IO_SIZE,
+ TARGET_PCIE, ATTR_PCIE_IO, KIRKWOOD_PCIE_IO_BUS_BASE
+ },
+ { 1, KIRKWOOD_PCIE_MEM_PHYS_BASE, KIRKWOOD_PCIE_MEM_SIZE,
+ TARGET_PCIE, ATTR_PCIE_MEM, KIRKWOOD_PCIE_MEM_BUS_BASE
+ },
+ { 2, KIRKWOOD_PCIE1_IO_PHYS_BASE, KIRKWOOD_PCIE1_IO_SIZE,
+ TARGET_PCIE, ATTR_PCIE1_IO, KIRKWOOD_PCIE1_IO_BUS_BASE
+ },
+ { 3, KIRKWOOD_PCIE1_MEM_PHYS_BASE, KIRKWOOD_PCIE1_MEM_SIZE,
+ TARGET_PCIE, ATTR_PCIE1_MEM, KIRKWOOD_PCIE1_MEM_BUS_BASE
+ },
/*
- * Setup windows for PCIe IO+MEM space.
+ * Window for NAND controller.
*/
- setup_cpu_win(0, KIRKWOOD_PCIE_IO_PHYS_BASE, KIRKWOOD_PCIE_IO_SIZE,
- TARGET_PCIE, ATTR_PCIE_IO, KIRKWOOD_PCIE_IO_BUS_BASE);
- setup_cpu_win(1, KIRKWOOD_PCIE_MEM_PHYS_BASE, KIRKWOOD_PCIE_MEM_SIZE,
- TARGET_PCIE, ATTR_PCIE_MEM, KIRKWOOD_PCIE_MEM_BUS_BASE);
- setup_cpu_win(2, KIRKWOOD_PCIE1_IO_PHYS_BASE, KIRKWOOD_PCIE1_IO_SIZE,
- TARGET_PCIE, ATTR_PCIE1_IO, KIRKWOOD_PCIE1_IO_BUS_BASE);
- setup_cpu_win(3, KIRKWOOD_PCIE1_MEM_PHYS_BASE, KIRKWOOD_PCIE1_MEM_SIZE,
- TARGET_PCIE, ATTR_PCIE1_MEM, KIRKWOOD_PCIE1_MEM_BUS_BASE);
-
+ { 4, KIRKWOOD_NAND_MEM_PHYS_BASE, KIRKWOOD_NAND_MEM_SIZE,
+ TARGET_DEV_BUS, ATTR_DEV_NAND, -1
+ },
/*
- * Setup window for NAND controller.
+ * Window for SRAM.
*/
- setup_cpu_win(4, KIRKWOOD_NAND_MEM_PHYS_BASE, KIRKWOOD_NAND_MEM_SIZE,
- TARGET_DEV_BUS, ATTR_DEV_NAND, -1);
+ { 5, KIRKWOOD_SRAM_PHYS_BASE, KIRKWOOD_SRAM_SIZE,
+ TARGET_SRAM, ATTR_SRAM, -1
+ },
+ /* End marker */
+ { -1, 0, 0, 0, 0, 0 }
+};
+void __init kirkwood_setup_cpu_mbus(void)
+{
/*
- * Setup window for SRAM.
+ * Disable, clear and configure windows.
*/
- setup_cpu_win(5, KIRKWOOD_SRAM_PHYS_BASE, KIRKWOOD_SRAM_SIZE,
- TARGET_SRAM, ATTR_SRAM, -1);
+ orion_config_wins(&addr_map_cfg, addr_map_info);
/*
* Setup MBUS dram target info.
*/
- kirkwood_mbus_dram_info.mbus_dram_target_id = TARGET_DDR;
-
- addr = (void __iomem *)DDR_WINDOW_CPU_BASE;
-
- for (i = 0, cs = 0; i < 4; i++) {
- u32 base = readl(addr + DDR_BASE_CS_OFF(i));
- u32 size = readl(addr + DDR_SIZE_CS_OFF(i));
-
- /*
- * Chip select enabled?
- */
- if (size & 1) {
- struct mbus_dram_window *w;
-
- w = &kirkwood_mbus_dram_info.cs[cs++];
- w->cs_index = i;
- w->mbus_attr = 0xf & ~(1 << i);
- w->base = base & 0xffff0000;
- w->size = (size | 0x0000ffff) + 1;
- }
- }
- kirkwood_mbus_dram_info.num_cs = cs;
+ orion_setup_cpu_mbus_target(&addr_map_cfg, DDR_WINDOW_CPU_BASE);
}
diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c
index 0bff4a91623..cc15426787b 100644
--- a/arch/arm/mach-kirkwood/common.c
+++ b/arch/arm/mach-kirkwood/common.c
@@ -12,7 +12,6 @@
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/serial_8250.h>
-#include <linux/mbus.h>
#include <linux/ata_platform.h>
#include <linux/mtd/nand.h>
#include <linux/dma-mapping.h>
@@ -30,6 +29,7 @@
#include <plat/orion_nand.h>
#include <plat/common.h>
#include <plat/time.h>
+#include <plat/addr-map.h>
#include "common.h"
/*****************************************************************************
@@ -73,8 +73,7 @@ unsigned int kirkwood_clk_ctrl = CGC_DUNIT | CGC_RESERVED;
void __init kirkwood_ehci_init(void)
{
kirkwood_clk_ctrl |= CGC_USB0;
- orion_ehci_init(&kirkwood_mbus_dram_info,
- USB_PHYS_BASE, IRQ_KIRKWOOD_USB);
+ orion_ehci_init(USB_PHYS_BASE, IRQ_KIRKWOOD_USB);
}
@@ -85,7 +84,7 @@ void __init kirkwood_ge00_init(struct mv643xx_eth_platform_data *eth_data)
{
kirkwood_clk_ctrl |= CGC_GE0;
- orion_ge00_init(eth_data, &kirkwood_mbus_dram_info,
+ orion_ge00_init(eth_data,
GE00_PHYS_BASE, IRQ_KIRKWOOD_GE00_SUM,
IRQ_KIRKWOOD_GE00_ERR, kirkwood_tclk);
}
@@ -99,7 +98,7 @@ void __init kirkwood_ge01_init(struct mv643xx_eth_platform_data *eth_data)
kirkwood_clk_ctrl |= CGC_GE1;
- orion_ge01_init(eth_data, &kirkwood_mbus_dram_info,
+ orion_ge01_init(eth_data,
GE01_PHYS_BASE, IRQ_KIRKWOOD_GE01_SUM,
IRQ_KIRKWOOD_GE01_ERR, kirkwood_tclk);
}
@@ -178,8 +177,7 @@ void __init kirkwood_sata_init(struct mv_sata_platform_data *sata_data)
if (sata_data->n_ports > 1)
kirkwood_clk_ctrl |= CGC_SATA1;
- orion_sata_init(sata_data, &kirkwood_mbus_dram_info,
- SATA_PHYS_BASE, IRQ_KIRKWOOD_SATA);
+ orion_sata_init(sata_data, SATA_PHYS_BASE, IRQ_KIRKWOOD_SATA);
}
@@ -221,7 +219,6 @@ void __init kirkwood_sdio_init(struct mvsdio_platform_data *mvsdio_data)
mvsdio_data->clock = 100000000;
else
mvsdio_data->clock = 200000000;
- mvsdio_data->dram = &kirkwood_mbus_dram_info;
kirkwood_clk_ctrl |= CGC_SDIO;
kirkwood_sdio.dev.platform_data = mvsdio_data;
platform_device_register(&kirkwood_sdio);
@@ -285,8 +282,7 @@ static void __init kirkwood_xor0_init(void)
{
kirkwood_clk_ctrl |= CGC_XOR0;
- orion_xor0_init(&kirkwood_mbus_dram_info,
- XOR0_PHYS_BASE, XOR0_HIGH_PHYS_BASE,
+ orion_xor0_init(XOR0_PHYS_BASE, XOR0_HIGH_PHYS_BASE,
IRQ_KIRKWOOD_XOR_00, IRQ_KIRKWOOD_XOR_01);
}
@@ -364,7 +360,6 @@ static struct resource kirkwood_i2s_resources[] = {
};
static struct kirkwood_asoc_platform_data kirkwood_i2s_data = {
- .dram = &kirkwood_mbus_dram_info,
.burst = 128,
};
@@ -430,6 +425,8 @@ static char * __init kirkwood_id(void)
} else if (dev == MV88F6282_DEV_ID) {
if (rev == MV88F6282_REV_A0)
return "MV88F6282-Rev-A0";
+ else if (rev == MV88F6282_REV_A1)
+ return "MV88F6282-Rev-A1";
else
return "MV88F6282-Rev-Unsupported";
} else {
diff --git a/arch/arm/mach-kirkwood/common.h b/arch/arm/mach-kirkwood/common.h
index 1529280246d..9071a397136 100644
--- a/arch/arm/mach-kirkwood/common.h
+++ b/arch/arm/mach-kirkwood/common.h
@@ -30,7 +30,6 @@ void kirkwood_init(void);
void kirkwood_init_early(void);
void kirkwood_init_irq(void);
-extern struct mbus_dram_target_info kirkwood_mbus_dram_info;
void kirkwood_setup_cpu_mbus(void);
void kirkwood_enable_pcie(void);
diff --git a/arch/arm/mach-kirkwood/include/mach/kirkwood.h b/arch/arm/mach-kirkwood/include/mach/kirkwood.h
index 010bdeb4ac5..fede3d503ef 100644
--- a/arch/arm/mach-kirkwood/include/mach/kirkwood.h
+++ b/arch/arm/mach-kirkwood/include/mach/kirkwood.h
@@ -135,4 +135,5 @@
#define MV88F6282_DEV_ID 0x6282
#define MV88F6282_REV_A0 0
+#define MV88F6282_REV_A1 1
#endif
diff --git a/arch/arm/mach-kirkwood/mpp.c b/arch/arm/mach-kirkwood/mpp.c
index cc431fa22cc..0c6ad63f10c 100644
--- a/arch/arm/mach-kirkwood/mpp.c
+++ b/arch/arm/mach-kirkwood/mpp.c
@@ -10,7 +10,6 @@
#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/init.h>
-#include <linux/mbus.h>
#include <linux/io.h>
#include <mach/hardware.h>
#include <plat/mpp.h>
diff --git a/arch/arm/mach-kirkwood/mpp.h b/arch/arm/mach-kirkwood/mpp.h
index ac787957e2d..e8fda45c073 100644
--- a/arch/arm/mach-kirkwood/mpp.h
+++ b/arch/arm/mach-kirkwood/mpp.h
@@ -102,6 +102,7 @@
#define MPP11_SATA0_ACTn MPP( 11, 0x5, 0, 1, 0, 1, 1, 1, 1 )
#define MPP12_GPO MPP( 12, 0x0, 0, 1, 1, 1, 1, 1, 1 )
+#define MPP12_GPIO MPP( 12, 0x0, 1, 1, 0, 0, 0, 1, 0 )
#define MPP12_SD_CLK MPP( 12, 0x1, 0, 1, 1, 1, 1, 1, 1 )
#define MPP12_AU_SPDIF0 MPP( 12, 0xa, 0, 1, 0, 0, 0, 0, 1 )
#define MPP12_SPI_MOSI MPP( 12, 0xb, 0, 1, 0, 0, 0, 0, 1 )
diff --git a/arch/arm/mach-kirkwood/pcie.c b/arch/arm/mach-kirkwood/pcie.c
index 74b992d810e..fb451bfe478 100644
--- a/arch/arm/mach-kirkwood/pcie.c
+++ b/arch/arm/mach-kirkwood/pcie.c
@@ -11,12 +11,12 @@
#include <linux/kernel.h>
#include <linux/pci.h>
#include <linux/slab.h>
-#include <linux/mbus.h>
#include <video/vga.h>
#include <asm/irq.h>
#include <asm/mach/pci.h>
#include <plat/pcie.h>
#include <mach/bridge-regs.h>
+#include <plat/addr-map.h>
#include "common.h"
void kirkwood_enable_pcie(void)
@@ -208,7 +208,7 @@ static int __init kirkwood_pcie_setup(int nr, struct pci_sys_data *sys)
*/
orion_pcie_set_local_bus_nr(pp->base, sys->busnr);
- orion_pcie_setup(pp->base, &kirkwood_mbus_dram_info);
+ orion_pcie_setup(pp->base);
return 1;
}
diff --git a/arch/arm/mach-mv78xx0/addr-map.c b/arch/arm/mach-mv78xx0/addr-map.c
index 311d5b0e9bc..62b53d710ef 100644
--- a/arch/arm/mach-mv78xx0/addr-map.c
+++ b/arch/arm/mach-mv78xx0/addr-map.c
@@ -12,12 +12,12 @@
#include <linux/init.h>
#include <linux/mbus.h>
#include <linux/io.h>
+#include <plat/addr-map.h>
#include "common.h"
/*
* Generic Address Decode Windows bit settings
*/
-#define TARGET_DDR 0
#define TARGET_DEV_BUS 1
#define TARGET_PCIE0 4
#define TARGET_PCIE1 8
@@ -32,23 +32,10 @@
#define ATTR_PCIE_MEM(l) (0xf8 & ~(0x10 << (l)))
/*
- * Helpers to get DDR bank info
- */
-#define DDR_BASE_CS_OFF(n) (0x0000 + ((n) << 3))
-#define DDR_SIZE_CS_OFF(n) (0x0004 + ((n) << 3))
-
-/*
* CPU Address Decode Windows registers
*/
#define WIN0_OFF(n) (BRIDGE_VIRT_BASE + 0x0000 + ((n) << 4))
#define WIN8_OFF(n) (BRIDGE_VIRT_BASE + 0x0900 + (((n) - 8) << 4))
-#define WIN_CTRL_OFF 0x0000
-#define WIN_BASE_OFF 0x0004
-#define WIN_REMAP_LO_OFF 0x0008
-#define WIN_REMAP_HI_OFF 0x000c
-
-
-struct mbus_dram_target_info mv78xx0_mbus_dram_info;
static void __init __iomem *win_cfg_base(int win)
{
@@ -63,94 +50,43 @@ static void __init __iomem *win_cfg_base(int win)
return (void __iomem *)((win < 8) ? WIN0_OFF(win) : WIN8_OFF(win));
}
-static int __init cpu_win_can_remap(int win)
-{
- if (win < 8)
- return 1;
-
- return 0;
-}
-
-static void __init setup_cpu_win(int win, u32 base, u32 size,
- u8 target, u8 attr, int remap)
-{
- void __iomem *addr = win_cfg_base(win);
- u32 ctrl;
-
- base &= 0xffff0000;
- ctrl = ((size - 1) & 0xffff0000) | (attr << 8) | (target << 4) | 1;
-
- writel(base, addr + WIN_BASE_OFF);
- writel(ctrl, addr + WIN_CTRL_OFF);
- if (cpu_win_can_remap(win)) {
- if (remap < 0)
- remap = base;
-
- writel(remap & 0xffff0000, addr + WIN_REMAP_LO_OFF);
- writel(0, addr + WIN_REMAP_HI_OFF);
- }
-}
+/*
+ * Description of the windows needed by the platform code
+ */
+static struct __initdata orion_addr_map_cfg addr_map_cfg = {
+ .num_wins = 14,
+ .remappable_wins = 8,
+ .win_cfg_base = win_cfg_base,
+};
void __init mv78xx0_setup_cpu_mbus(void)
{
- void __iomem *addr;
- int i;
- int cs;
-
/*
- * First, disable and clear windows.
+ * Disable, clear and configure windows.
*/
- for (i = 0; i < 14; i++) {
- addr = win_cfg_base(i);
-
- writel(0, addr + WIN_BASE_OFF);
- writel(0, addr + WIN_CTRL_OFF);
- if (cpu_win_can_remap(i)) {
- writel(0, addr + WIN_REMAP_LO_OFF);
- writel(0, addr + WIN_REMAP_HI_OFF);
- }
- }
+ orion_config_wins(&addr_map_cfg, NULL);
/*
* Setup MBUS dram target info.
*/
- mv78xx0_mbus_dram_info.mbus_dram_target_id = TARGET_DDR;
-
if (mv78xx0_core_index() == 0)
- addr = (void __iomem *)DDR_WINDOW_CPU0_BASE;
+ orion_setup_cpu_mbus_target(&addr_map_cfg,
+ DDR_WINDOW_CPU0_BASE);
else
- addr = (void __iomem *)DDR_WINDOW_CPU1_BASE;
-
- for (i = 0, cs = 0; i < 4; i++) {
- u32 base = readl(addr + DDR_BASE_CS_OFF(i));
- u32 size = readl(addr + DDR_SIZE_CS_OFF(i));
-
- /*
- * Chip select enabled?
- */
- if (size & 1) {
- struct mbus_dram_window *w;
-
- w = &mv78xx0_mbus_dram_info.cs[cs++];
- w->cs_index = i;
- w->mbus_attr = 0xf & ~(1 << i);
- w->base = base & 0xffff0000;
- w->size = (size | 0x0000ffff) + 1;
- }
- }
- mv78xx0_mbus_dram_info.num_cs = cs;
+ orion_setup_cpu_mbus_target(&addr_map_cfg,
+ DDR_WINDOW_CPU1_BASE);
}
void __init mv78xx0_setup_pcie_io_win(int window, u32 base, u32 size,
int maj, int min)
{
- setup_cpu_win(window, base, size, TARGET_PCIE(maj),
- ATTR_PCIE_IO(min), -1);
+ orion_setup_cpu_win(&addr_map_cfg, window, base, size,
+ TARGET_PCIE(maj), ATTR_PCIE_IO(min), -1);
}
void __init mv78xx0_setup_pcie_mem_win(int window, u32 base, u32 size,
int maj, int min)
{
- setup_cpu_win(window, base, size, TARGET_PCIE(maj),
- ATTR_PCIE_MEM(min), -1);
+ orion_setup_cpu_win(&addr_map_cfg, window, base, size,
+ TARGET_PCIE(maj), ATTR_PCIE_MEM(min), -1);
}
diff --git a/arch/arm/mach-mv78xx0/common.c b/arch/arm/mach-mv78xx0/common.c
index 5b9632b0116..0cdd41004ad 100644
--- a/arch/arm/mach-mv78xx0/common.c
+++ b/arch/arm/mach-mv78xx0/common.c
@@ -12,7 +12,6 @@
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/serial_8250.h>
-#include <linux/mbus.h>
#include <linux/ata_platform.h>
#include <linux/ethtool.h>
#include <asm/mach/map.h>
@@ -23,6 +22,7 @@
#include <plat/orion_nand.h>
#include <plat/time.h>
#include <plat/common.h>
+#include <plat/addr-map.h>
#include "common.h"
static int get_tclk(void);
@@ -169,8 +169,7 @@ void __init mv78xx0_map_io(void)
****************************************************************************/
void __init mv78xx0_ehci0_init(void)
{
- orion_ehci_init(&mv78xx0_mbus_dram_info,
- USB0_PHYS_BASE, IRQ_MV78XX0_USB_0);
+ orion_ehci_init(USB0_PHYS_BASE, IRQ_MV78XX0_USB_0);
}
@@ -179,8 +178,7 @@ void __init mv78xx0_ehci0_init(void)
****************************************************************************/
void __init mv78xx0_ehci1_init(void)
{
- orion_ehci_1_init(&mv78xx0_mbus_dram_info,
- USB1_PHYS_BASE, IRQ_MV78XX0_USB_1);
+ orion_ehci_1_init(USB1_PHYS_BASE, IRQ_MV78XX0_USB_1);
}
@@ -189,8 +187,7 @@ void __init mv78xx0_ehci1_init(void)
****************************************************************************/
void __init mv78xx0_ehci2_init(void)
{
- orion_ehci_2_init(&mv78xx0_mbus_dram_info,
- USB2_PHYS_BASE, IRQ_MV78XX0_USB_2);
+ orion_ehci_2_init(USB2_PHYS_BASE, IRQ_MV78XX0_USB_2);
}
@@ -199,7 +196,7 @@ void __init mv78xx0_ehci2_init(void)
****************************************************************************/
void __init mv78xx0_ge00_init(struct mv643xx_eth_platform_data *eth_data)
{
- orion_ge00_init(eth_data, &mv78xx0_mbus_dram_info,
+ orion_ge00_init(eth_data,
GE00_PHYS_BASE, IRQ_MV78XX0_GE00_SUM,
IRQ_MV78XX0_GE_ERR, get_tclk());
}
@@ -210,7 +207,7 @@ void __init mv78xx0_ge00_init(struct mv643xx_eth_platform_data *eth_data)
****************************************************************************/
void __init mv78xx0_ge01_init(struct mv643xx_eth_platform_data *eth_data)
{
- orion_ge01_init(eth_data, &mv78xx0_mbus_dram_info,
+ orion_ge01_init(eth_data,
GE01_PHYS_BASE, IRQ_MV78XX0_GE01_SUM,
NO_IRQ, get_tclk());
}
@@ -234,7 +231,7 @@ void __init mv78xx0_ge10_init(struct mv643xx_eth_platform_data *eth_data)
eth_data->duplex = DUPLEX_FULL;
}
- orion_ge10_init(eth_data, &mv78xx0_mbus_dram_info,
+ orion_ge10_init(eth_data,
GE10_PHYS_BASE, IRQ_MV78XX0_GE10_SUM,
NO_IRQ, get_tclk());
}
@@ -258,7 +255,7 @@ void __init mv78xx0_ge11_init(struct mv643xx_eth_platform_data *eth_data)
eth_data->duplex = DUPLEX_FULL;
}
- orion_ge11_init(eth_data, &mv78xx0_mbus_dram_info,
+ orion_ge11_init(eth_data,
GE11_PHYS_BASE, IRQ_MV78XX0_GE11_SUM,
NO_IRQ, get_tclk());
}
@@ -277,8 +274,7 @@ void __init mv78xx0_i2c_init(void)
****************************************************************************/
void __init mv78xx0_sata_init(struct mv_sata_platform_data *sata_data)
{
- orion_sata_init(sata_data, &mv78xx0_mbus_dram_info,
- SATA_PHYS_BASE, IRQ_MV78XX0_SATA);
+ orion_sata_init(sata_data, SATA_PHYS_BASE, IRQ_MV78XX0_SATA);
}
diff --git a/arch/arm/mach-mv78xx0/common.h b/arch/arm/mach-mv78xx0/common.h
index 07d5f8f6be7..507c767d49e 100644
--- a/arch/arm/mach-mv78xx0/common.h
+++ b/arch/arm/mach-mv78xx0/common.h
@@ -23,7 +23,6 @@ void mv78xx0_init(void);
void mv78xx0_init_early(void);
void mv78xx0_init_irq(void);
-extern struct mbus_dram_target_info mv78xx0_mbus_dram_info;
void mv78xx0_setup_cpu_mbus(void);
void mv78xx0_setup_pcie_io_win(int window, u32 base, u32 size,
int maj, int min);
diff --git a/arch/arm/mach-mv78xx0/mpp.c b/arch/arm/mach-mv78xx0/mpp.c
index cf4e494d44b..df50342179e 100644
--- a/arch/arm/mach-mv78xx0/mpp.c
+++ b/arch/arm/mach-mv78xx0/mpp.c
@@ -10,7 +10,6 @@
#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/init.h>
-#include <linux/mbus.h>
#include <linux/io.h>
#include <plat/mpp.h>
#include <mach/hardware.h>
diff --git a/arch/arm/mach-mv78xx0/pcie.c b/arch/arm/mach-mv78xx0/pcie.c
index c51af1cac30..12fcb108b0e 100644
--- a/arch/arm/mach-mv78xx0/pcie.c
+++ b/arch/arm/mach-mv78xx0/pcie.c
@@ -10,11 +10,11 @@
#include <linux/kernel.h>
#include <linux/pci.h>
-#include <linux/mbus.h>
#include <video/vga.h>
#include <asm/irq.h>
#include <asm/mach/pci.h>
#include <plat/pcie.h>
+#include <plat/addr-map.h>
#include "common.h"
struct pcie_port {
@@ -153,7 +153,7 @@ static int __init mv78xx0_pcie_setup(int nr, struct pci_sys_data *sys)
* Generic PCIe unit setup.
*/
orion_pcie_set_local_bus_nr(pp->base, sys->busnr);
- orion_pcie_setup(pp->base, &mv78xx0_mbus_dram_info);
+ orion_pcie_setup(pp->base);
sys->resource[0] = &pp->res[0];
sys->resource[1] = &pp->res[1];
diff --git a/arch/arm/mach-omap1/Kconfig b/arch/arm/mach-omap1/Kconfig
index 73f287d6429..4f8d66f044e 100644
--- a/arch/arm/mach-omap1/Kconfig
+++ b/arch/arm/mach-omap1/Kconfig
@@ -168,70 +168,6 @@ config MACH_OMAP_GENERIC
custom OMAP boards. Say Y here if you have a custom
board.
-comment "OMAP CPU Speed"
- depends on ARCH_OMAP1
-
-config OMAP_ARM_216MHZ
- bool "OMAP ARM 216 MHz CPU (1710 only)"
- depends on ARCH_OMAP1 && ARCH_OMAP16XX
- help
- Enable 216 MHz clock for OMAP1710 CPU. If unsure, say N.
-
-config OMAP_ARM_195MHZ
- bool "OMAP ARM 195 MHz CPU"
- depends on ARCH_OMAP1 && (ARCH_OMAP730 || ARCH_OMAP850)
- help
- Enable 195MHz clock for OMAP CPU. If unsure, say N.
-
-config OMAP_ARM_192MHZ
- bool "OMAP ARM 192 MHz CPU"
- depends on ARCH_OMAP1 && ARCH_OMAP16XX
- help
- Enable 192MHz clock for OMAP CPU. If unsure, say N.
-
-config OMAP_ARM_182MHZ
- bool "OMAP ARM 182 MHz CPU"
- depends on ARCH_OMAP1 && (ARCH_OMAP730 || ARCH_OMAP850)
- help
- Enable 182MHz clock for OMAP CPU. If unsure, say N.
-
-config OMAP_ARM_168MHZ
- bool "OMAP ARM 168 MHz CPU"
- depends on ARCH_OMAP1 && (ARCH_OMAP15XX || ARCH_OMAP16XX || ARCH_OMAP730 || ARCH_OMAP850)
- help
- Enable 168MHz clock for OMAP CPU. If unsure, say N.
-
-config OMAP_ARM_150MHZ
- bool "OMAP ARM 150 MHz CPU"
- depends on ARCH_OMAP1 && ARCH_OMAP15XX
- help
- Enable 150MHz clock for OMAP CPU. If unsure, say N.
-
-config OMAP_ARM_120MHZ
- bool "OMAP ARM 120 MHz CPU"
- depends on ARCH_OMAP1 && (ARCH_OMAP15XX || ARCH_OMAP16XX || ARCH_OMAP730 || ARCH_OMAP850)
- help
- Enable 120MHz clock for OMAP CPU. If unsure, say N.
-
-config OMAP_ARM_96MHZ
- bool "OMAP ARM 96 MHz CPU"
- depends on ARCH_OMAP1 && (ARCH_OMAP15XX || ARCH_OMAP16XX || ARCH_OMAP730 || ARCH_OMAP850)
- help
- Enable 96MHz clock for OMAP CPU. If unsure, say N.
-
-config OMAP_ARM_60MHZ
- bool "OMAP ARM 60 MHz CPU"
- depends on ARCH_OMAP1 && (ARCH_OMAP15XX || ARCH_OMAP16XX || ARCH_OMAP730 || ARCH_OMAP850)
- default y
- help
- Enable 60MHz clock for OMAP CPU. If unsure, say Y.
-
-config OMAP_ARM_30MHZ
- bool "OMAP ARM 30 MHz CPU"
- depends on ARCH_OMAP1 && (ARCH_OMAP15XX || ARCH_OMAP16XX || ARCH_OMAP730 || ARCH_OMAP850)
- help
- Enable 30MHz clock for OMAP CPU. If unsure, say N.
-
endmenu
endif
diff --git a/arch/arm/mach-omap1/clock.c b/arch/arm/mach-omap1/clock.c
index 84ef70476b5..0c50df05d13 100644
--- a/arch/arm/mach-omap1/clock.c
+++ b/arch/arm/mach-omap1/clock.c
@@ -197,11 +197,10 @@ int omap1_select_table_rate(struct clk *clk, unsigned long rate)
ref_rate = ck_ref_p->rate;
for (ptr = omap1_rate_table; ptr->rate; ptr++) {
- if (ptr->xtal != ref_rate)
+ if (!(ptr->flags & cpu_mask))
continue;
- /* DPLL1 cannot be reprogrammed without risking system crash */
- if (likely(dpll1_rate != 0) && ptr->pll_rate != dpll1_rate)
+ if (ptr->xtal != ref_rate)
continue;
/* Can check only after xtal frequency check */
@@ -215,12 +214,8 @@ int omap1_select_table_rate(struct clk *clk, unsigned long rate)
/*
* In most cases we should not need to reprogram DPLL.
* Reprogramming the DPLL is tricky, it must be done from SRAM.
- * (on 730, bit 13 must always be 1)
*/
- if (cpu_is_omap7xx())
- omap_sram_reprogram_clock(ptr->dpllctl_val, ptr->ckctl_val | 0x2000);
- else
- omap_sram_reprogram_clock(ptr->dpllctl_val, ptr->ckctl_val);
+ omap_sram_reprogram_clock(ptr->dpllctl_val, ptr->ckctl_val);
/* XXX Do we need to recalculate the tree below DPLL1 at this point? */
ck_dpll1_p->rate = ptr->pll_rate;
@@ -290,6 +285,9 @@ long omap1_round_to_table_rate(struct clk *clk, unsigned long rate)
highest_rate = -EINVAL;
for (ptr = omap1_rate_table; ptr->rate; ptr++) {
+ if (!(ptr->flags & cpu_mask))
+ continue;
+
if (ptr->xtal != ref_rate)
continue;
diff --git a/arch/arm/mach-omap1/clock.h b/arch/arm/mach-omap1/clock.h
index 16b1423b454..3d04f4f6767 100644
--- a/arch/arm/mach-omap1/clock.h
+++ b/arch/arm/mach-omap1/clock.h
@@ -111,4 +111,7 @@ extern const struct clkops clkops_dummy;
extern const struct clkops clkops_uart_16xx;
extern const struct clkops clkops_generic;
+/* used for passing SoC type to omap1_{select,round_to}_table_rate() */
+extern u32 cpu_mask;
+
#endif
diff --git a/arch/arm/mach-omap1/clock_data.c b/arch/arm/mach-omap1/clock_data.c
index 9ff90a744a2..94699a82a73 100644
--- a/arch/arm/mach-omap1/clock_data.c
+++ b/arch/arm/mach-omap1/clock_data.c
@@ -25,6 +25,7 @@
#include <plat/clock.h>
#include <plat/cpu.h>
#include <plat/clkdev_omap.h>
+#include <plat/sram.h> /* for omap_sram_reprogram_clock() */
#include <plat/usb.h> /* for OTG_BASE */
#include "clock.h"
@@ -778,12 +779,14 @@ static void __init omap1_show_rates(void)
arm_ck.rate / 1000000, (arm_ck.rate / 100000) % 10);
}
+u32 cpu_mask;
+
int __init omap1_clk_init(void)
{
struct omap_clk *c;
const struct omap_clock_config *info;
int crystal_type = 0; /* Default 12 MHz */
- u32 reg, cpu_mask;
+ u32 reg;
#ifdef CONFIG_DEBUG_LL
/*
@@ -808,6 +811,8 @@ int __init omap1_clk_init(void)
clk_preinit(c->lk.clk);
cpu_mask = 0;
+ if (cpu_is_omap1710())
+ cpu_mask |= CK_1710;
if (cpu_is_omap16xx())
cpu_mask |= CK_16XX;
if (cpu_is_omap1510())
@@ -931,17 +936,13 @@ void __init omap1_clk_late_init(void)
{
unsigned long rate = ck_dpll1.rate;
- if (rate >= OMAP1_DPLL1_SANE_VALUE)
- return;
-
- /* System booting at unusable rate, force reprogramming of DPLL1 */
- ck_dpll1_p->rate = 0;
-
/* Find the highest supported frequency and enable it */
if (omap1_select_table_rate(&virtual_ck_mpu, ~0)) {
pr_err("System frequencies not set, using default. Check your config.\n");
- omap_writew(0x2290, DPLL_CTL);
- omap_writew(cpu_is_omap7xx() ? 0x2005 : 0x0005, ARM_CKCTL);
+ /*
+ * Reprogramming the DPLL is tricky, it must be done from SRAM.
+ */
+ omap_sram_reprogram_clock(0x2290, 0x0005);
ck_dpll1.rate = OMAP1_DPLL1_SANE_VALUE;
}
propagate_rate(&ck_dpll1);
diff --git a/arch/arm/mach-omap1/opp.h b/arch/arm/mach-omap1/opp.h
index 07074d79adc..79a683864a5 100644
--- a/arch/arm/mach-omap1/opp.h
+++ b/arch/arm/mach-omap1/opp.h
@@ -21,6 +21,7 @@ struct mpu_rate {
unsigned long pll_rate;
__u16 ckctl_val;
__u16 dpllctl_val;
+ u32 flags;
};
extern struct mpu_rate omap1_rate_table[];
diff --git a/arch/arm/mach-omap1/opp_data.c b/arch/arm/mach-omap1/opp_data.c
index 75a54651499..9cd4ddb5139 100644
--- a/arch/arm/mach-omap1/opp_data.c
+++ b/arch/arm/mach-omap1/opp_data.c
@@ -10,6 +10,7 @@
* published by the Free Software Foundation.
*/
+#include <plat/clkdev_omap.h>
#include "opp.h"
/*-------------------------------------------------------------------------
@@ -20,40 +21,34 @@ struct mpu_rate omap1_rate_table[] = {
* NOTE: Comment order here is different from bits in CKCTL value:
* armdiv, dspdiv, dspmmu, tcdiv, perdiv, lcddiv
*/
-#if defined(CONFIG_OMAP_ARM_216MHZ)
- { 216000000, 12000000, 216000000, 0x050d, 0x2910 }, /* 1/1/2/2/2/8 */
-#endif
-#if defined(CONFIG_OMAP_ARM_195MHZ)
- { 195000000, 13000000, 195000000, 0x050e, 0x2790 }, /* 1/1/2/2/4/8 */
-#endif
-#if defined(CONFIG_OMAP_ARM_192MHZ)
- { 192000000, 19200000, 192000000, 0x050f, 0x2510 }, /* 1/1/2/2/8/8 */
- { 192000000, 12000000, 192000000, 0x050f, 0x2810 }, /* 1/1/2/2/8/8 */
- { 96000000, 12000000, 192000000, 0x055f, 0x2810 }, /* 2/2/2/2/8/8 */
- { 48000000, 12000000, 192000000, 0x0baf, 0x2810 }, /* 4/4/4/8/8/8 */
- { 24000000, 12000000, 192000000, 0x0fff, 0x2810 }, /* 8/8/8/8/8/8 */
-#endif
-#if defined(CONFIG_OMAP_ARM_182MHZ)
- { 182000000, 13000000, 182000000, 0x050e, 0x2710 }, /* 1/1/2/2/4/8 */
-#endif
-#if defined(CONFIG_OMAP_ARM_168MHZ)
- { 168000000, 12000000, 168000000, 0x010f, 0x2710 }, /* 1/1/1/2/8/8 */
-#endif
-#if defined(CONFIG_OMAP_ARM_150MHZ)
- { 150000000, 12000000, 150000000, 0x010a, 0x2cb0 }, /* 1/1/1/2/4/4 */
-#endif
-#if defined(CONFIG_OMAP_ARM_120MHZ)
- { 120000000, 12000000, 120000000, 0x010a, 0x2510 }, /* 1/1/1/2/4/4 */
-#endif
-#if defined(CONFIG_OMAP_ARM_96MHZ)
- { 96000000, 12000000, 96000000, 0x0005, 0x2410 }, /* 1/1/1/1/2/2 */
-#endif
-#if defined(CONFIG_OMAP_ARM_60MHZ)
- { 60000000, 12000000, 60000000, 0x0005, 0x2290 }, /* 1/1/1/1/2/2 */
-#endif
-#if defined(CONFIG_OMAP_ARM_30MHZ)
- { 30000000, 12000000, 60000000, 0x0555, 0x2290 }, /* 2/2/2/2/2/2 */
-#endif
+ { 216000000, 12000000, 216000000, 0x050d, 0x2910, /* 1/1/2/2/2/8 */
+ CK_1710 },
+ { 195000000, 13000000, 195000000, 0x050e, 0x2790, /* 1/1/2/2/4/8 */
+ CK_7XX },
+ { 192000000, 19200000, 192000000, 0x050f, 0x2510, /* 1/1/2/2/8/8 */
+ CK_16XX },
+ { 192000000, 12000000, 192000000, 0x050f, 0x2810, /* 1/1/2/2/8/8 */
+ CK_16XX },
+ { 96000000, 12000000, 192000000, 0x055f, 0x2810, /* 2/2/2/2/8/8 */
+ CK_16XX },
+ { 48000000, 12000000, 192000000, 0x0baf, 0x2810, /* 4/4/4/8/8/8 */
+ CK_16XX },
+ { 24000000, 12000000, 192000000, 0x0fff, 0x2810, /* 8/8/8/8/8/8 */
+ CK_16XX },
+ { 182000000, 13000000, 182000000, 0x050e, 0x2710, /* 1/1/2/2/4/8 */
+ CK_7XX },
+ { 168000000, 12000000, 168000000, 0x010f, 0x2710, /* 1/1/1/2/8/8 */
+ CK_16XX|CK_7XX },
+ { 150000000, 12000000, 150000000, 0x010a, 0x2cb0, /* 1/1/1/2/4/4 */
+ CK_1510 },
+ { 120000000, 12000000, 120000000, 0x010a, 0x2510, /* 1/1/1/2/4/4 */
+ CK_16XX|CK_1510|CK_310|CK_7XX },
+ { 96000000, 12000000, 96000000, 0x0005, 0x2410, /* 1/1/1/1/2/2 */
+ CK_16XX|CK_1510|CK_310|CK_7XX },
+ { 60000000, 12000000, 60000000, 0x0005, 0x2290, /* 1/1/1/1/2/2 */
+ CK_16XX|CK_1510|CK_310|CK_7XX },
+ { 30000000, 12000000, 60000000, 0x0555, 0x2290, /* 2/2/2/2/2/2 */
+ CK_16XX|CK_1510|CK_310|CK_7XX },
{ 0, 0, 0, 0, 0 },
};
diff --git a/arch/arm/mach-omap2/clock3xxx_data.c b/arch/arm/mach-omap2/clock3xxx_data.c
index 60424f41156..039cadf84c1 100644
--- a/arch/arm/mach-omap2/clock3xxx_data.c
+++ b/arch/arm/mach-omap2/clock3xxx_data.c
@@ -2480,6 +2480,16 @@ static struct clk uart4_fck = {
.recalc = &followparent_recalc,
};
+static struct clk uart4_fck_am35xx = {
+ .name = "uart4_fck",
+ .ops = &clkops_omap2_dflt_wait,
+ .parent = &per_48m_fck,
+ .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+ .enable_bit = OMAP3430_EN_UART4_SHIFT,
+ .clkdm_name = "core_l4_clkdm",
+ .recalc = &followparent_recalc,
+};
+
static struct clk gpt2_fck = {
.name = "gpt2_fck",
.ops = &clkops_omap2_dflt_wait,
@@ -3403,6 +3413,7 @@ static struct omap_clk omap3xxx_clks[] = {
CLK(NULL, "per_48m_fck", &per_48m_fck, CK_3XXX),
CLK(NULL, "uart3_fck", &uart3_fck, CK_3XXX),
CLK(NULL, "uart4_fck", &uart4_fck, CK_36XX),
+ CLK(NULL, "uart4_fck", &uart4_fck_am35xx, CK_3505 | CK_3517),
CLK(NULL, "gpt2_fck", &gpt2_fck, CK_3XXX),
CLK(NULL, "gpt3_fck", &gpt3_fck, CK_3XXX),
CLK(NULL, "gpt4_fck", &gpt4_fck, CK_3XXX),
diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
index 126cb49c0de..5324e8d93bc 100644
--- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
@@ -84,6 +84,8 @@ static struct omap_hwmod omap3xxx_mcbsp4_hwmod;
static struct omap_hwmod omap3xxx_mcbsp5_hwmod;
static struct omap_hwmod omap3xxx_mcbsp2_sidetone_hwmod;
static struct omap_hwmod omap3xxx_mcbsp3_sidetone_hwmod;
+static struct omap_hwmod omap3xxx_usb_host_hs_hwmod;
+static struct omap_hwmod omap3xxx_usb_tll_hs_hwmod;
/* L3 -> L4_CORE interface */
static struct omap_hwmod_ocp_if omap3xxx_l3_main__l4_core = {
@@ -164,6 +166,7 @@ static struct omap_hwmod omap3xxx_uart1_hwmod;
static struct omap_hwmod omap3xxx_uart2_hwmod;
static struct omap_hwmod omap3xxx_uart3_hwmod;
static struct omap_hwmod omap3xxx_uart4_hwmod;
+static struct omap_hwmod am35xx_uart4_hwmod;
static struct omap_hwmod omap3xxx_usbhsotg_hwmod;
/* l3_core -> usbhsotg interface */
@@ -299,6 +302,23 @@ static struct omap_hwmod_ocp_if omap3_l4_per__uart4 = {
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
+/* AM35xx: L4 CORE -> UART4 interface */
+static struct omap_hwmod_addr_space am35xx_uart4_addr_space[] = {
+ {
+ .pa_start = OMAP3_UART4_AM35XX_BASE,
+ .pa_end = OMAP3_UART4_AM35XX_BASE + SZ_1K - 1,
+ .flags = ADDR_MAP_ON_INIT | ADDR_TYPE_RT,
+ },
+};
+
+static struct omap_hwmod_ocp_if am35xx_l4_core__uart4 = {
+ .master = &omap3xxx_l4_core_hwmod,
+ .slave = &am35xx_uart4_hwmod,
+ .clk = "uart4_ick",
+ .addr = am35xx_uart4_addr_space,
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
/* L4 CORE -> I2C1 interface */
static struct omap_hwmod_ocp_if omap3_l4_core__i2c1 = {
.master = &omap3xxx_l4_core_hwmod,
@@ -1162,6 +1182,7 @@ static struct omap_hwmod_class_sysconfig i2c_sysc = {
SYSC_HAS_ENAWAKEUP | SYSC_HAS_SOFTRESET |
SYSC_HAS_AUTOIDLE | SYSS_HAS_RESET_STATUS),
.idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
+ .clockact = CLOCKACT_TEST_ICLK,
.sysc_fields = &omap_hwmod_sysc_type1,
};
@@ -1309,6 +1330,39 @@ static struct omap_hwmod omap3xxx_uart4_hwmod = {
.class = &omap2_uart_class,
};
+static struct omap_hwmod_irq_info am35xx_uart4_mpu_irqs[] = {
+ { .irq = INT_35XX_UART4_IRQ, },
+};
+
+static struct omap_hwmod_dma_info am35xx_uart4_sdma_reqs[] = {
+ { .name = "rx", .dma_req = AM35XX_DMA_UART4_RX, },
+ { .name = "tx", .dma_req = AM35XX_DMA_UART4_TX, },
+};
+
+static struct omap_hwmod_ocp_if *am35xx_uart4_slaves[] = {
+ &am35xx_l4_core__uart4,
+};
+
+static struct omap_hwmod am35xx_uart4_hwmod = {
+ .name = "uart4",
+ .mpu_irqs = am35xx_uart4_mpu_irqs,
+ .sdma_reqs = am35xx_uart4_sdma_reqs,
+ .main_clk = "uart4_fck",
+ .prcm = {
+ .omap2 = {
+ .module_offs = CORE_MOD,
+ .prcm_reg_id = 1,
+ .module_bit = OMAP3430_EN_UART4_SHIFT,
+ .idlest_reg_id = 1,
+ .idlest_idle_bit = OMAP3430_EN_UART4_SHIFT,
+ },
+ },
+ .slaves = am35xx_uart4_slaves,
+ .slaves_cnt = ARRAY_SIZE(am35xx_uart4_slaves),
+ .class = &omap2_uart_class,
+};
+
+
static struct omap_hwmod_class i2c_class = {
.name = "i2c",
.sysc = &i2c_sysc,
@@ -1636,7 +1690,7 @@ static struct omap_hwmod_ocp_if *omap3xxx_i2c1_slaves[] = {
static struct omap_hwmod omap3xxx_i2c1_hwmod = {
.name = "i2c1",
- .flags = HWMOD_16BIT_REG,
+ .flags = HWMOD_16BIT_REG | HWMOD_SET_DEFAULT_CLOCKACT,
.mpu_irqs = omap2_i2c1_mpu_irqs,
.sdma_reqs = omap2_i2c1_sdma_reqs,
.main_clk = "i2c1_fck",
@@ -1670,7 +1724,7 @@ static struct omap_hwmod_ocp_if *omap3xxx_i2c2_slaves[] = {
static struct omap_hwmod omap3xxx_i2c2_hwmod = {
.name = "i2c2",
- .flags = HWMOD_16BIT_REG,
+ .flags = HWMOD_16BIT_REG | HWMOD_SET_DEFAULT_CLOCKACT,
.mpu_irqs = omap2_i2c2_mpu_irqs,
.sdma_reqs = omap2_i2c2_sdma_reqs,
.main_clk = "i2c2_fck",
@@ -1715,7 +1769,7 @@ static struct omap_hwmod_ocp_if *omap3xxx_i2c3_slaves[] = {
static struct omap_hwmod omap3xxx_i2c3_hwmod = {
.name = "i2c3",
- .flags = HWMOD_16BIT_REG,
+ .flags = HWMOD_16BIT_REG | HWMOD_SET_DEFAULT_CLOCKACT,
.mpu_irqs = i2c3_mpu_irqs,
.sdma_reqs = i2c3_sdma_reqs,
.main_clk = "i2c3_fck",
@@ -3072,7 +3126,35 @@ static struct omap_mmc_dev_attr mmc1_dev_attr = {
.flags = OMAP_HSMMC_SUPPORTS_DUAL_VOLT,
};
-static struct omap_hwmod omap3xxx_mmc1_hwmod = {
+/* See 35xx errata 2.1.1.128 in SPRZ278F */
+static struct omap_mmc_dev_attr mmc1_pre_es3_dev_attr = {
+ .flags = (OMAP_HSMMC_SUPPORTS_DUAL_VOLT |
+ OMAP_HSMMC_BROKEN_MULTIBLOCK_READ),
+};
+
+static struct omap_hwmod omap3xxx_pre_es3_mmc1_hwmod = {
+ .name = "mmc1",
+ .mpu_irqs = omap34xx_mmc1_mpu_irqs,
+ .sdma_reqs = omap34xx_mmc1_sdma_reqs,
+ .opt_clks = omap34xx_mmc1_opt_clks,
+ .opt_clks_cnt = ARRAY_SIZE(omap34xx_mmc1_opt_clks),
+ .main_clk = "mmchs1_fck",
+ .prcm = {
+ .omap2 = {
+ .module_offs = CORE_MOD,
+ .prcm_reg_id = 1,
+ .module_bit = OMAP3430_EN_MMC1_SHIFT,
+ .idlest_reg_id = 1,
+ .idlest_idle_bit = OMAP3430_ST_MMC1_SHIFT,
+ },
+ },
+ .dev_attr = &mmc1_pre_es3_dev_attr,
+ .slaves = omap3xxx_mmc1_slaves,
+ .slaves_cnt = ARRAY_SIZE(omap3xxx_mmc1_slaves),
+ .class = &omap34xx_mmc_class,
+};
+
+static struct omap_hwmod omap3xxx_es3plus_mmc1_hwmod = {
.name = "mmc1",
.mpu_irqs = omap34xx_mmc1_mpu_irqs,
.sdma_reqs = omap34xx_mmc1_sdma_reqs,
@@ -3115,7 +3197,34 @@ static struct omap_hwmod_ocp_if *omap3xxx_mmc2_slaves[] = {
&omap3xxx_l4_core__mmc2,
};
-static struct omap_hwmod omap3xxx_mmc2_hwmod = {
+/* See 35xx errata 2.1.1.128 in SPRZ278F */
+static struct omap_mmc_dev_attr mmc2_pre_es3_dev_attr = {
+ .flags = OMAP_HSMMC_BROKEN_MULTIBLOCK_READ,
+};
+
+static struct omap_hwmod omap3xxx_pre_es3_mmc2_hwmod = {
+ .name = "mmc2",
+ .mpu_irqs = omap34xx_mmc2_mpu_irqs,
+ .sdma_reqs = omap34xx_mmc2_sdma_reqs,
+ .opt_clks = omap34xx_mmc2_opt_clks,
+ .opt_clks_cnt = ARRAY_SIZE(omap34xx_mmc2_opt_clks),
+ .main_clk = "mmchs2_fck",
+ .prcm = {
+ .omap2 = {
+ .module_offs = CORE_MOD,
+ .prcm_reg_id = 1,
+ .module_bit = OMAP3430_EN_MMC2_SHIFT,
+ .idlest_reg_id = 1,
+ .idlest_idle_bit = OMAP3430_ST_MMC2_SHIFT,
+ },
+ },
+ .dev_attr = &mmc2_pre_es3_dev_attr,
+ .slaves = omap3xxx_mmc2_slaves,
+ .slaves_cnt = ARRAY_SIZE(omap3xxx_mmc2_slaves),
+ .class = &omap34xx_mmc_class,
+};
+
+static struct omap_hwmod omap3xxx_es3plus_mmc2_hwmod = {
.name = "mmc2",
.mpu_irqs = omap34xx_mmc2_mpu_irqs,
.sdma_reqs = omap34xx_mmc2_sdma_reqs,
@@ -3177,13 +3286,223 @@ static struct omap_hwmod omap3xxx_mmc3_hwmod = {
.class = &omap34xx_mmc_class,
};
+/*
+ * 'usb_host_hs' class
+ * high-speed multi-port usb host controller
+ */
+static struct omap_hwmod_ocp_if omap3xxx_usb_host_hs__l3_main_2 = {
+ .master = &omap3xxx_usb_host_hs_hwmod,
+ .slave = &omap3xxx_l3_main_hwmod,
+ .clk = "core_l3_ick",
+ .user = OCP_USER_MPU,
+};
+
+static struct omap_hwmod_class_sysconfig omap3xxx_usb_host_hs_sysc = {
+ .rev_offs = 0x0000,
+ .sysc_offs = 0x0010,
+ .syss_offs = 0x0014,
+ .sysc_flags = (SYSC_HAS_MIDLEMODE | SYSC_HAS_CLOCKACTIVITY |
+ SYSC_HAS_SIDLEMODE | SYSC_HAS_ENAWAKEUP |
+ SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE),
+ .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
+ MSTANDBY_FORCE | MSTANDBY_NO | MSTANDBY_SMART),
+ .sysc_fields = &omap_hwmod_sysc_type1,
+};
+
+static struct omap_hwmod_class omap3xxx_usb_host_hs_hwmod_class = {
+ .name = "usb_host_hs",
+ .sysc = &omap3xxx_usb_host_hs_sysc,
+};
+
+static struct omap_hwmod_ocp_if *omap3xxx_usb_host_hs_masters[] = {
+ &omap3xxx_usb_host_hs__l3_main_2,
+};
+
+static struct omap_hwmod_addr_space omap3xxx_usb_host_hs_addrs[] = {
+ {
+ .name = "uhh",
+ .pa_start = 0x48064000,
+ .pa_end = 0x480643ff,
+ .flags = ADDR_TYPE_RT
+ },
+ {
+ .name = "ohci",
+ .pa_start = 0x48064400,
+ .pa_end = 0x480647ff,
+ },
+ {
+ .name = "ehci",
+ .pa_start = 0x48064800,
+ .pa_end = 0x48064cff,
+ },
+ {}
+};
+
+static struct omap_hwmod_ocp_if omap3xxx_l4_core__usb_host_hs = {
+ .master = &omap3xxx_l4_core_hwmod,
+ .slave = &omap3xxx_usb_host_hs_hwmod,
+ .clk = "usbhost_ick",
+ .addr = omap3xxx_usb_host_hs_addrs,
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_ocp_if *omap3xxx_usb_host_hs_slaves[] = {
+ &omap3xxx_l4_core__usb_host_hs,
+};
+
+static struct omap_hwmod_opt_clk omap3xxx_usb_host_hs_opt_clks[] = {
+ { .role = "ehci_logic_fck", .clk = "usbhost_120m_fck", },
+};
+
+static struct omap_hwmod_irq_info omap3xxx_usb_host_hs_irqs[] = {
+ { .name = "ohci-irq", .irq = 76 },
+ { .name = "ehci-irq", .irq = 77 },
+ { .irq = -1 }
+};
+
+static struct omap_hwmod omap3xxx_usb_host_hs_hwmod = {
+ .name = "usb_host_hs",
+ .class = &omap3xxx_usb_host_hs_hwmod_class,
+ .clkdm_name = "l3_init_clkdm",
+ .mpu_irqs = omap3xxx_usb_host_hs_irqs,
+ .main_clk = "usbhost_48m_fck",
+ .prcm = {
+ .omap2 = {
+ .module_offs = OMAP3430ES2_USBHOST_MOD,
+ .prcm_reg_id = 1,
+ .module_bit = OMAP3430ES2_EN_USBHOST1_SHIFT,
+ .idlest_reg_id = 1,
+ .idlest_idle_bit = OMAP3430ES2_ST_USBHOST_IDLE_SHIFT,
+ .idlest_stdby_bit = OMAP3430ES2_ST_USBHOST_STDBY_SHIFT,
+ },
+ },
+ .opt_clks = omap3xxx_usb_host_hs_opt_clks,
+ .opt_clks_cnt = ARRAY_SIZE(omap3xxx_usb_host_hs_opt_clks),
+ .slaves = omap3xxx_usb_host_hs_slaves,
+ .slaves_cnt = ARRAY_SIZE(omap3xxx_usb_host_hs_slaves),
+ .masters = omap3xxx_usb_host_hs_masters,
+ .masters_cnt = ARRAY_SIZE(omap3xxx_usb_host_hs_masters),
+
+ /*
+ * Errata: USBHOST Configured In Smart-Idle Can Lead To a Deadlock
+ * id: i660
+ *
+ * Description:
+ * In the following configuration :
+ * - USBHOST module is set to smart-idle mode
+ * - PRCM asserts idle_req to the USBHOST module ( This typically
+ * happens when the system is going to a low power mode : all ports
+ * have been suspended, the master part of the USBHOST module has
+ * entered the standby state, and SW has cut the functional clocks)
+ * - an USBHOST interrupt occurs before the module is able to answer
+ * idle_ack, typically a remote wakeup IRQ.
+ * Then the USB HOST module will enter a deadlock situation where it
+ * is no more accessible nor functional.
+ *
+ * Workaround:
+ * Don't use smart idle; use only force idle, hence HWMOD_SWSUP_SIDLE
+ */
+
+ /*
+ * Errata: USB host EHCI may stall when entering smart-standby mode
+ * Id: i571
+ *
+ * Description:
+ * When the USBHOST module is set to smart-standby mode, and when it is
+ * ready to enter the standby state (i.e. all ports are suspended and
+ * all attached devices are in suspend mode), then it can wrongly assert
+ * the Mstandby signal too early while there are still some residual OCP
+ * transactions ongoing. If this condition occurs, the internal state
+ * machine may go to an undefined state and the USB link may be stuck
+ * upon the next resume.
+ *
+ * Workaround:
+ * Don't use smart standby; use only force standby,
+ * hence HWMOD_SWSUP_MSTANDBY
+ */
+
+ /*
+ * During system boot; If the hwmod framework resets the module
+ * the module will have smart idle settings; which can lead to deadlock
+ * (above Errata Id:i660); so, dont reset the module during boot;
+ * Use HWMOD_INIT_NO_RESET.
+ */
+
+ .flags = HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY |
+ HWMOD_INIT_NO_RESET,
+};
+
+/*
+ * 'usb_tll_hs' class
+ * usb_tll_hs module is the adapter on the usb_host_hs ports
+ */
+static struct omap_hwmod_class_sysconfig omap3xxx_usb_tll_hs_sysc = {
+ .rev_offs = 0x0000,
+ .sysc_offs = 0x0010,
+ .syss_offs = 0x0014,
+ .sysc_flags = (SYSC_HAS_CLOCKACTIVITY | SYSC_HAS_SIDLEMODE |
+ SYSC_HAS_ENAWAKEUP | SYSC_HAS_SOFTRESET |
+ SYSC_HAS_AUTOIDLE),
+ .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
+ .sysc_fields = &omap_hwmod_sysc_type1,
+};
+
+static struct omap_hwmod_class omap3xxx_usb_tll_hs_hwmod_class = {
+ .name = "usb_tll_hs",
+ .sysc = &omap3xxx_usb_tll_hs_sysc,
+};
+
+static struct omap_hwmod_irq_info omap3xxx_usb_tll_hs_irqs[] = {
+ { .name = "tll-irq", .irq = 78 },
+ { .irq = -1 }
+};
+
+static struct omap_hwmod_addr_space omap3xxx_usb_tll_hs_addrs[] = {
+ {
+ .name = "tll",
+ .pa_start = 0x48062000,
+ .pa_end = 0x48062fff,
+ .flags = ADDR_TYPE_RT
+ },
+ {}
+};
+
+static struct omap_hwmod_ocp_if omap3xxx_l4_core__usb_tll_hs = {
+ .master = &omap3xxx_l4_core_hwmod,
+ .slave = &omap3xxx_usb_tll_hs_hwmod,
+ .clk = "usbtll_ick",
+ .addr = omap3xxx_usb_tll_hs_addrs,
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_ocp_if *omap3xxx_usb_tll_hs_slaves[] = {
+ &omap3xxx_l4_core__usb_tll_hs,
+};
+
+static struct omap_hwmod omap3xxx_usb_tll_hs_hwmod = {
+ .name = "usb_tll_hs",
+ .class = &omap3xxx_usb_tll_hs_hwmod_class,
+ .clkdm_name = "l3_init_clkdm",
+ .mpu_irqs = omap3xxx_usb_tll_hs_irqs,
+ .main_clk = "usbtll_fck",
+ .prcm = {
+ .omap2 = {
+ .module_offs = CORE_MOD,
+ .prcm_reg_id = 3,
+ .module_bit = OMAP3430ES2_EN_USBTLL_SHIFT,
+ .idlest_reg_id = 3,
+ .idlest_idle_bit = OMAP3430ES2_ST_USBTLL_SHIFT,
+ },
+ },
+ .slaves = omap3xxx_usb_tll_hs_slaves,
+ .slaves_cnt = ARRAY_SIZE(omap3xxx_usb_tll_hs_slaves),
+};
+
static __initdata struct omap_hwmod *omap3xxx_hwmods[] = {
&omap3xxx_l3_main_hwmod,
&omap3xxx_l4_core_hwmod,
&omap3xxx_l4_per_hwmod,
&omap3xxx_l4_wkup_hwmod,
- &omap3xxx_mmc1_hwmod,
- &omap3xxx_mmc2_hwmod,
&omap3xxx_mmc3_hwmod,
&omap3xxx_mpu_hwmod,
@@ -3203,6 +3522,7 @@ static __initdata struct omap_hwmod *omap3xxx_hwmods[] = {
&omap3xxx_uart1_hwmod,
&omap3xxx_uart2_hwmod,
&omap3xxx_uart3_hwmod,
+
/* dss class */
&omap3xxx_dss_dispc_hwmod,
&omap3xxx_dss_dsi1_hwmod,
@@ -3260,6 +3580,22 @@ static __initdata struct omap_hwmod *omap3430es1_hwmods[] = {
static __initdata struct omap_hwmod *omap3430es2plus_hwmods[] = {
&omap3xxx_dss_core_hwmod,
&omap3xxx_usbhsotg_hwmod,
+ &omap3xxx_usb_host_hs_hwmod,
+ &omap3xxx_usb_tll_hs_hwmod,
+ NULL
+};
+
+/* <= 3430ES3-only hwmods */
+static struct omap_hwmod *omap3430_pre_es3_hwmods[] __initdata = {
+ &omap3xxx_pre_es3_mmc1_hwmod,
+ &omap3xxx_pre_es3_mmc2_hwmod,
+ NULL
+};
+
+/* 3430ES3+-only hwmods */
+static struct omap_hwmod *omap3430_es3plus_hwmods[] __initdata = {
+ &omap3xxx_es3plus_mmc1_hwmod,
+ &omap3xxx_es3plus_mmc2_hwmod,
NULL
};
@@ -3281,12 +3617,21 @@ static __initdata struct omap_hwmod *omap36xx_hwmods[] = {
&omap36xx_sr2_hwmod,
&omap3xxx_usbhsotg_hwmod,
&omap3xxx_mailbox_hwmod,
+ &omap3xxx_usb_host_hs_hwmod,
+ &omap3xxx_usb_tll_hs_hwmod,
+ &omap3xxx_es3plus_mmc1_hwmod,
+ &omap3xxx_es3plus_mmc2_hwmod,
NULL
};
static __initdata struct omap_hwmod *am35xx_hwmods[] = {
&omap3xxx_dss_core_hwmod, /* XXX ??? */
&am35xx_usbhsotg_hwmod,
+ &am35xx_uart4_hwmod,
+ &omap3xxx_usb_host_hs_hwmod,
+ &omap3xxx_usb_tll_hs_hwmod,
+ &omap3xxx_es3plus_mmc1_hwmod,
+ &omap3xxx_es3plus_mmc2_hwmod,
NULL
};
@@ -3346,6 +3691,21 @@ int __init omap3xxx_hwmod_init(void)
h = omap3430es2plus_hwmods;
};
+ if (h) {
+ r = omap_hwmod_register(h);
+ if (r < 0)
+ return r;
+ }
+
+ h = NULL;
+ if (rev == OMAP3430_REV_ES1_0 || rev == OMAP3430_REV_ES2_0 ||
+ rev == OMAP3430_REV_ES2_1) {
+ h = omap3430_pre_es3_hwmods;
+ } else if (rev == OMAP3430_REV_ES3_0 || rev == OMAP3430_REV_ES3_1 ||
+ rev == OMAP3430_REV_ES3_1_2) {
+ h = omap3430_es3plus_hwmods;
+ };
+
if (h)
r = omap_hwmod_register(h);
diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
index daaf165af69..f9f15108176 100644
--- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
@@ -70,6 +70,8 @@ static struct omap_hwmod omap44xx_mmc2_hwmod;
static struct omap_hwmod omap44xx_mpu_hwmod;
static struct omap_hwmod omap44xx_mpu_private_hwmod;
static struct omap_hwmod omap44xx_usb_otg_hs_hwmod;
+static struct omap_hwmod omap44xx_usb_host_hs_hwmod;
+static struct omap_hwmod omap44xx_usb_tll_hs_hwmod;
/*
* Interconnects omap_hwmod structures
@@ -2246,6 +2248,7 @@ static struct omap_hwmod_class_sysconfig omap44xx_i2c_sysc = {
SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS),
.idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
SIDLE_SMART_WKUP),
+ .clockact = CLOCKACT_TEST_ICLK,
.sysc_fields = &omap_hwmod_sysc_type1,
};
@@ -2300,7 +2303,7 @@ static struct omap_hwmod omap44xx_i2c1_hwmod = {
.name = "i2c1",
.class = &omap44xx_i2c_hwmod_class,
.clkdm_name = "l4_per_clkdm",
- .flags = HWMOD_16BIT_REG,
+ .flags = HWMOD_16BIT_REG | HWMOD_SET_DEFAULT_CLOCKACT,
.mpu_irqs = omap44xx_i2c1_irqs,
.sdma_reqs = omap44xx_i2c1_sdma_reqs,
.main_clk = "i2c1_fck",
@@ -2356,7 +2359,7 @@ static struct omap_hwmod omap44xx_i2c2_hwmod = {
.name = "i2c2",
.class = &omap44xx_i2c_hwmod_class,
.clkdm_name = "l4_per_clkdm",
- .flags = HWMOD_16BIT_REG,
+ .flags = HWMOD_16BIT_REG | HWMOD_SET_DEFAULT_CLOCKACT,
.mpu_irqs = omap44xx_i2c2_irqs,
.sdma_reqs = omap44xx_i2c2_sdma_reqs,
.main_clk = "i2c2_fck",
@@ -2412,7 +2415,7 @@ static struct omap_hwmod omap44xx_i2c3_hwmod = {
.name = "i2c3",
.class = &omap44xx_i2c_hwmod_class,
.clkdm_name = "l4_per_clkdm",
- .flags = HWMOD_16BIT_REG,
+ .flags = HWMOD_16BIT_REG | HWMOD_SET_DEFAULT_CLOCKACT,
.mpu_irqs = omap44xx_i2c3_irqs,
.sdma_reqs = omap44xx_i2c3_sdma_reqs,
.main_clk = "i2c3_fck",
@@ -2468,7 +2471,7 @@ static struct omap_hwmod omap44xx_i2c4_hwmod = {
.name = "i2c4",
.class = &omap44xx_i2c_hwmod_class,
.clkdm_name = "l4_per_clkdm",
- .flags = HWMOD_16BIT_REG,
+ .flags = HWMOD_16BIT_REG | HWMOD_SET_DEFAULT_CLOCKACT,
.mpu_irqs = omap44xx_i2c4_irqs,
.sdma_reqs = omap44xx_i2c4_sdma_reqs,
.main_clk = "i2c4_fck",
@@ -5276,6 +5279,207 @@ static struct omap_hwmod omap44xx_wd_timer3_hwmod = {
.slaves_cnt = ARRAY_SIZE(omap44xx_wd_timer3_slaves),
};
+/*
+ * 'usb_host_hs' class
+ * high-speed multi-port usb host controller
+ */
+static struct omap_hwmod_ocp_if omap44xx_usb_host_hs__l3_main_2 = {
+ .master = &omap44xx_usb_host_hs_hwmod,
+ .slave = &omap44xx_l3_main_2_hwmod,
+ .clk = "l3_div_ck",
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_class_sysconfig omap44xx_usb_host_hs_sysc = {
+ .rev_offs = 0x0000,
+ .sysc_offs = 0x0010,
+ .syss_offs = 0x0014,
+ .sysc_flags = (SYSC_HAS_MIDLEMODE | SYSC_HAS_SIDLEMODE |
+ SYSC_HAS_SOFTRESET),
+ .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
+ SIDLE_SMART_WKUP | MSTANDBY_FORCE | MSTANDBY_NO |
+ MSTANDBY_SMART | MSTANDBY_SMART_WKUP),
+ .sysc_fields = &omap_hwmod_sysc_type2,
+};
+
+static struct omap_hwmod_class omap44xx_usb_host_hs_hwmod_class = {
+ .name = "usb_host_hs",
+ .sysc = &omap44xx_usb_host_hs_sysc,
+};
+
+static struct omap_hwmod_ocp_if *omap44xx_usb_host_hs_masters[] = {
+ &omap44xx_usb_host_hs__l3_main_2,
+};
+
+static struct omap_hwmod_addr_space omap44xx_usb_host_hs_addrs[] = {
+ {
+ .name = "uhh",
+ .pa_start = 0x4a064000,
+ .pa_end = 0x4a0647ff,
+ .flags = ADDR_TYPE_RT
+ },
+ {
+ .name = "ohci",
+ .pa_start = 0x4a064800,
+ .pa_end = 0x4a064bff,
+ },
+ {
+ .name = "ehci",
+ .pa_start = 0x4a064c00,
+ .pa_end = 0x4a064fff,
+ },
+ {}
+};
+
+static struct omap_hwmod_irq_info omap44xx_usb_host_hs_irqs[] = {
+ { .name = "ohci-irq", .irq = 76 + OMAP44XX_IRQ_GIC_START },
+ { .name = "ehci-irq", .irq = 77 + OMAP44XX_IRQ_GIC_START },
+ { .irq = -1 }
+};
+
+static struct omap_hwmod_ocp_if omap44xx_l4_cfg__usb_host_hs = {
+ .master = &omap44xx_l4_cfg_hwmod,
+ .slave = &omap44xx_usb_host_hs_hwmod,
+ .clk = "l4_div_ck",
+ .addr = omap44xx_usb_host_hs_addrs,
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_ocp_if *omap44xx_usb_host_hs_slaves[] = {
+ &omap44xx_l4_cfg__usb_host_hs,
+};
+
+static struct omap_hwmod omap44xx_usb_host_hs_hwmod = {
+ .name = "usb_host_hs",
+ .class = &omap44xx_usb_host_hs_hwmod_class,
+ .clkdm_name = "l3_init_clkdm",
+ .main_clk = "usb_host_hs_fck",
+ .prcm = {
+ .omap4 = {
+ .clkctrl_offs = OMAP4_CM_L3INIT_USB_HOST_CLKCTRL_OFFSET,
+ .context_offs = OMAP4_RM_L3INIT_USB_HOST_CONTEXT_OFFSET,
+ .modulemode = MODULEMODE_SWCTRL,
+ },
+ },
+ .mpu_irqs = omap44xx_usb_host_hs_irqs,
+ .slaves = omap44xx_usb_host_hs_slaves,
+ .slaves_cnt = ARRAY_SIZE(omap44xx_usb_host_hs_slaves),
+ .masters = omap44xx_usb_host_hs_masters,
+ .masters_cnt = ARRAY_SIZE(omap44xx_usb_host_hs_masters),
+
+ /*
+ * Errata: USBHOST Configured In Smart-Idle Can Lead To a Deadlock
+ * id: i660
+ *
+ * Description:
+ * In the following configuration :
+ * - USBHOST module is set to smart-idle mode
+ * - PRCM asserts idle_req to the USBHOST module ( This typically
+ * happens when the system is going to a low power mode : all ports
+ * have been suspended, the master part of the USBHOST module has
+ * entered the standby state, and SW has cut the functional clocks)
+ * - an USBHOST interrupt occurs before the module is able to answer
+ * idle_ack, typically a remote wakeup IRQ.
+ * Then the USB HOST module will enter a deadlock situation where it
+ * is no more accessible nor functional.
+ *
+ * Workaround:
+ * Don't use smart idle; use only force idle, hence HWMOD_SWSUP_SIDLE
+ */
+
+ /*
+ * Errata: USB host EHCI may stall when entering smart-standby mode
+ * Id: i571
+ *
+ * Description:
+ * When the USBHOST module is set to smart-standby mode, and when it is
+ * ready to enter the standby state (i.e. all ports are suspended and
+ * all attached devices are in suspend mode), then it can wrongly assert
+ * the Mstandby signal too early while there are still some residual OCP
+ * transactions ongoing. If this condition occurs, the internal state
+ * machine may go to an undefined state and the USB link may be stuck
+ * upon the next resume.
+ *
+ * Workaround:
+ * Don't use smart standby; use only force standby,
+ * hence HWMOD_SWSUP_MSTANDBY
+ */
+
+ /*
+ * During system boot; If the hwmod framework resets the module
+ * the module will have smart idle settings; which can lead to deadlock
+ * (above Errata Id:i660); so, dont reset the module during boot;
+ * Use HWMOD_INIT_NO_RESET.
+ */
+
+ .flags = HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY |
+ HWMOD_INIT_NO_RESET,
+};
+
+/*
+ * 'usb_tll_hs' class
+ * usb_tll_hs module is the adapter on the usb_host_hs ports
+ */
+static struct omap_hwmod_class_sysconfig omap44xx_usb_tll_hs_sysc = {
+ .rev_offs = 0x0000,
+ .sysc_offs = 0x0010,
+ .syss_offs = 0x0014,
+ .sysc_flags = (SYSC_HAS_CLOCKACTIVITY | SYSC_HAS_SIDLEMODE |
+ SYSC_HAS_ENAWAKEUP | SYSC_HAS_SOFTRESET |
+ SYSC_HAS_AUTOIDLE),
+ .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
+ .sysc_fields = &omap_hwmod_sysc_type1,
+};
+
+static struct omap_hwmod_class omap44xx_usb_tll_hs_hwmod_class = {
+ .name = "usb_tll_hs",
+ .sysc = &omap44xx_usb_tll_hs_sysc,
+};
+
+static struct omap_hwmod_irq_info omap44xx_usb_tll_hs_irqs[] = {
+ { .name = "tll-irq", .irq = 78 + OMAP44XX_IRQ_GIC_START },
+ { .irq = -1 }
+};
+
+static struct omap_hwmod_addr_space omap44xx_usb_tll_hs_addrs[] = {
+ {
+ .name = "tll",
+ .pa_start = 0x4a062000,
+ .pa_end = 0x4a063fff,
+ .flags = ADDR_TYPE_RT
+ },
+ {}
+};
+
+static struct omap_hwmod_ocp_if omap44xx_l4_cfg__usb_tll_hs = {
+ .master = &omap44xx_l4_cfg_hwmod,
+ .slave = &omap44xx_usb_tll_hs_hwmod,
+ .clk = "l4_div_ck",
+ .addr = omap44xx_usb_tll_hs_addrs,
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_ocp_if *omap44xx_usb_tll_hs_slaves[] = {
+ &omap44xx_l4_cfg__usb_tll_hs,
+};
+
+static struct omap_hwmod omap44xx_usb_tll_hs_hwmod = {
+ .name = "usb_tll_hs",
+ .class = &omap44xx_usb_tll_hs_hwmod_class,
+ .clkdm_name = "l3_init_clkdm",
+ .main_clk = "usb_tll_hs_ick",
+ .prcm = {
+ .omap4 = {
+ .clkctrl_offs = OMAP4_CM_L3INIT_USB_TLL_CLKCTRL_OFFSET,
+ .context_offs = OMAP4_RM_L3INIT_USB_TLL_CONTEXT_OFFSET,
+ .modulemode = MODULEMODE_HWCTRL,
+ },
+ },
+ .mpu_irqs = omap44xx_usb_tll_hs_irqs,
+ .slaves = omap44xx_usb_tll_hs_slaves,
+ .slaves_cnt = ARRAY_SIZE(omap44xx_usb_tll_hs_slaves),
+};
+
static __initdata struct omap_hwmod *omap44xx_hwmods[] = {
/* dmm class */
@@ -5415,13 +5619,16 @@ static __initdata struct omap_hwmod *omap44xx_hwmods[] = {
&omap44xx_uart3_hwmod,
&omap44xx_uart4_hwmod,
+ /* usb host class */
+ &omap44xx_usb_host_hs_hwmod,
+ &omap44xx_usb_tll_hs_hwmod,
+
/* usb_otg_hs class */
&omap44xx_usb_otg_hs_hwmod,
/* wd_timer class */
&omap44xx_wd_timer2_hwmod,
&omap44xx_wd_timer3_hwmod,
-
NULL,
};
diff --git a/arch/arm/mach-omap2/prcm-common.h b/arch/arm/mach-omap2/prcm-common.h
index 0363dcb0ef9..da2d80f5fcb 100644
--- a/arch/arm/mach-omap2/prcm-common.h
+++ b/arch/arm/mach-omap2/prcm-common.h
@@ -201,6 +201,8 @@
#define OMAP3430_EN_MMC2_SHIFT 25
#define OMAP3430_EN_MMC1_MASK (1 << 24)
#define OMAP3430_EN_MMC1_SHIFT 24
+#define OMAP3430_EN_UART4_MASK (1 << 23)
+#define OMAP3430_EN_UART4_SHIFT 23
#define OMAP3430_EN_MCSPI4_MASK (1 << 21)
#define OMAP3430_EN_MCSPI4_SHIFT 21
#define OMAP3430_EN_MCSPI3_MASK (1 << 20)
diff --git a/arch/arm/mach-orion5x/addr-map.c b/arch/arm/mach-orion5x/addr-map.c
index 5ceafdccc45..3638e5c12b7 100644
--- a/arch/arm/mach-orion5x/addr-map.c
+++ b/arch/arm/mach-orion5x/addr-map.c
@@ -14,8 +14,8 @@
#include <linux/init.h>
#include <linux/mbus.h>
#include <linux/io.h>
-#include <linux/errno.h>
#include <mach/hardware.h>
+#include <plat/addr-map.h>
#include "common.h"
/*
@@ -41,7 +41,6 @@
/*
* Generic Address Decode Windows bit settings
*/
-#define TARGET_DDR 0
#define TARGET_DEV_BUS 1
#define TARGET_PCI 3
#define TARGET_PCIE 4
@@ -57,27 +56,10 @@
#define ATTR_DEV_BOOT 0xf
#define ATTR_SRAM 0x0
-/*
- * Helpers to get DDR bank info
- */
-#define ORION5X_DDR_REG(x) (ORION5X_DDR_VIRT_BASE | (x))
-#define DDR_BASE_CS(n) ORION5X_DDR_REG(0x1500 + ((n) << 3))
-#define DDR_SIZE_CS(n) ORION5X_DDR_REG(0x1504 + ((n) << 3))
-
-/*
- * CPU Address Decode Windows registers
- */
-#define ORION5X_BRIDGE_REG(x) (ORION5X_BRIDGE_VIRT_BASE | (x))
-#define CPU_WIN_CTRL(n) ORION5X_BRIDGE_REG(0x000 | ((n) << 4))
-#define CPU_WIN_BASE(n) ORION5X_BRIDGE_REG(0x004 | ((n) << 4))
-#define CPU_WIN_REMAP_LO(n) ORION5X_BRIDGE_REG(0x008 | ((n) << 4))
-#define CPU_WIN_REMAP_HI(n) ORION5X_BRIDGE_REG(0x00c | ((n) << 4))
-
-
-struct mbus_dram_target_info orion5x_mbus_dram_info;
static int __initdata win_alloc_count;
-static int __init orion5x_cpu_win_can_remap(int win)
+static int __init cpu_win_can_remap(const struct orion_addr_map_cfg *cfg,
+ const int win)
{
u32 dev, rev;
@@ -91,116 +73,82 @@ static int __init orion5x_cpu_win_can_remap(int win)
return 0;
}
-static int __init setup_cpu_win(int win, u32 base, u32 size,
- u8 target, u8 attr, int remap)
-{
- if (win >= 8) {
- printk(KERN_ERR "setup_cpu_win: trying to allocate "
- "window %d\n", win);
- return -ENOSPC;
- }
-
- writel(base & 0xffff0000, CPU_WIN_BASE(win));
- writel(((size - 1) & 0xffff0000) | (attr << 8) | (target << 4) | 1,
- CPU_WIN_CTRL(win));
-
- if (orion5x_cpu_win_can_remap(win)) {
- if (remap < 0)
- remap = base;
-
- writel(remap & 0xffff0000, CPU_WIN_REMAP_LO(win));
- writel(0, CPU_WIN_REMAP_HI(win));
- }
- return 0;
-}
-
-void __init orion5x_setup_cpu_mbus_bridge(void)
-{
- int i;
- int cs;
+/*
+ * Description of the windows needed by the platform code
+ */
+static struct __initdata orion_addr_map_cfg addr_map_cfg = {
+ .num_wins = 8,
+ .cpu_win_can_remap = cpu_win_can_remap,
+ .bridge_virt_base = ORION5X_BRIDGE_VIRT_BASE,
+};
+static const struct __initdata orion_addr_map_info addr_map_info[] = {
/*
- * First, disable and clear windows.
+ * Setup windows for PCI+PCIe IO+MEM space.
*/
- for (i = 0; i < 8; i++) {
- writel(0, CPU_WIN_BASE(i));
- writel(0, CPU_WIN_CTRL(i));
- if (orion5x_cpu_win_can_remap(i)) {
- writel(0, CPU_WIN_REMAP_LO(i));
- writel(0, CPU_WIN_REMAP_HI(i));
- }
- }
+ { 0, ORION5X_PCIE_IO_PHYS_BASE, ORION5X_PCIE_IO_SIZE,
+ TARGET_PCIE, ATTR_PCIE_IO, ORION5X_PCIE_IO_BUS_BASE
+ },
+ { 1, ORION5X_PCI_IO_PHYS_BASE, ORION5X_PCI_IO_SIZE,
+ TARGET_PCI, ATTR_PCI_IO, ORION5X_PCI_IO_BUS_BASE
+ },
+ { 2, ORION5X_PCIE_MEM_PHYS_BASE, ORION5X_PCIE_MEM_SIZE,
+ TARGET_PCIE, ATTR_PCIE_MEM, -1
+ },
+ { 3, ORION5X_PCI_MEM_PHYS_BASE, ORION5X_PCI_MEM_SIZE,
+ TARGET_PCI, ATTR_PCI_MEM, -1
+ },
+ /* End marker */
+ { -1, 0, 0, 0, 0, 0 }
+};
+void __init orion5x_setup_cpu_mbus_bridge(void)
+{
/*
- * Setup windows for PCI+PCIe IO+MEM space.
+ * Disable, clear and configure windows.
*/
- setup_cpu_win(0, ORION5X_PCIE_IO_PHYS_BASE, ORION5X_PCIE_IO_SIZE,
- TARGET_PCIE, ATTR_PCIE_IO, ORION5X_PCIE_IO_BUS_BASE);
- setup_cpu_win(1, ORION5X_PCI_IO_PHYS_BASE, ORION5X_PCI_IO_SIZE,
- TARGET_PCI, ATTR_PCI_IO, ORION5X_PCI_IO_BUS_BASE);
- setup_cpu_win(2, ORION5X_PCIE_MEM_PHYS_BASE, ORION5X_PCIE_MEM_SIZE,
- TARGET_PCIE, ATTR_PCIE_MEM, -1);
- setup_cpu_win(3, ORION5X_PCI_MEM_PHYS_BASE, ORION5X_PCI_MEM_SIZE,
- TARGET_PCI, ATTR_PCI_MEM, -1);
+ orion_config_wins(&addr_map_cfg, addr_map_info);
win_alloc_count = 4;
/*
* Setup MBUS dram target info.
*/
- orion5x_mbus_dram_info.mbus_dram_target_id = TARGET_DDR;
-
- for (i = 0, cs = 0; i < 4; i++) {
- u32 base = readl(DDR_BASE_CS(i));
- u32 size = readl(DDR_SIZE_CS(i));
-
- /*
- * Chip select enabled?
- */
- if (size & 1) {
- struct mbus_dram_window *w;
-
- w = &orion5x_mbus_dram_info.cs[cs++];
- w->cs_index = i;
- w->mbus_attr = 0xf & ~(1 << i);
- w->base = base & 0xffff0000;
- w->size = (size | 0x0000ffff) + 1;
- }
- }
- orion5x_mbus_dram_info.num_cs = cs;
+ orion_setup_cpu_mbus_target(&addr_map_cfg, ORION5X_DDR_WINDOW_CPU_BASE);
}
void __init orion5x_setup_dev_boot_win(u32 base, u32 size)
{
- setup_cpu_win(win_alloc_count++, base, size,
- TARGET_DEV_BUS, ATTR_DEV_BOOT, -1);
+ orion_setup_cpu_win(&addr_map_cfg, win_alloc_count++, base, size,
+ TARGET_DEV_BUS, ATTR_DEV_BOOT, -1);
}
void __init orion5x_setup_dev0_win(u32 base, u32 size)
{
- setup_cpu_win(win_alloc_count++, base, size,
- TARGET_DEV_BUS, ATTR_DEV_CS0, -1);
+ orion_setup_cpu_win(&addr_map_cfg, win_alloc_count++, base, size,
+ TARGET_DEV_BUS, ATTR_DEV_CS0, -1);
}
void __init orion5x_setup_dev1_win(u32 base, u32 size)
{
- setup_cpu_win(win_alloc_count++, base, size,
- TARGET_DEV_BUS, ATTR_DEV_CS1, -1);
+ orion_setup_cpu_win(&addr_map_cfg, win_alloc_count++, base, size,
+ TARGET_DEV_BUS, ATTR_DEV_CS1, -1);
}
void __init orion5x_setup_dev2_win(u32 base, u32 size)
{
- setup_cpu_win(win_alloc_count++, base, size,
- TARGET_DEV_BUS, ATTR_DEV_CS2, -1);
+ orion_setup_cpu_win(&addr_map_cfg, win_alloc_count++, base, size,
+ TARGET_DEV_BUS, ATTR_DEV_CS2, -1);
}
void __init orion5x_setup_pcie_wa_win(u32 base, u32 size)
{
- setup_cpu_win(win_alloc_count++, base, size,
- TARGET_PCIE, ATTR_PCIE_WA, -1);
+ orion_setup_cpu_win(&addr_map_cfg, win_alloc_count++, base, size,
+ TARGET_PCIE, ATTR_PCIE_WA, -1);
}
-int __init orion5x_setup_sram_win(void)
+void __init orion5x_setup_sram_win(void)
{
- return setup_cpu_win(win_alloc_count++, ORION5X_SRAM_PHYS_BASE,
- ORION5X_SRAM_SIZE, TARGET_SRAM, ATTR_SRAM, -1);
+ orion_setup_cpu_win(&addr_map_cfg, win_alloc_count++,
+ ORION5X_SRAM_PHYS_BASE, ORION5X_SRAM_SIZE,
+ TARGET_SRAM, ATTR_SRAM, -1);
}
diff --git a/arch/arm/mach-orion5x/common.c b/arch/arm/mach-orion5x/common.c
index 41127e80cc1..0e28bae20bd 100644
--- a/arch/arm/mach-orion5x/common.c
+++ b/arch/arm/mach-orion5x/common.c
@@ -15,7 +15,6 @@
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
#include <linux/serial_8250.h>
-#include <linux/mbus.h>
#include <linux/mv643xx_i2c.h>
#include <linux/ata_platform.h>
#include <linux/delay.h>
@@ -32,6 +31,7 @@
#include <plat/orion_nand.h>
#include <plat/time.h>
#include <plat/common.h>
+#include <plat/addr-map.h>
#include "common.h"
/*****************************************************************************
@@ -72,8 +72,7 @@ void __init orion5x_map_io(void)
****************************************************************************/
void __init orion5x_ehci0_init(void)
{
- orion_ehci_init(&orion5x_mbus_dram_info,
- ORION5X_USB0_PHYS_BASE, IRQ_ORION5X_USB0_CTRL);
+ orion_ehci_init(ORION5X_USB0_PHYS_BASE, IRQ_ORION5X_USB0_CTRL);
}
@@ -82,8 +81,7 @@ void __init orion5x_ehci0_init(void)
****************************************************************************/
void __init orion5x_ehci1_init(void)
{
- orion_ehci_1_init(&orion5x_mbus_dram_info,
- ORION5X_USB1_PHYS_BASE, IRQ_ORION5X_USB1_CTRL);
+ orion_ehci_1_init(ORION5X_USB1_PHYS_BASE, IRQ_ORION5X_USB1_CTRL);
}
@@ -92,7 +90,7 @@ void __init orion5x_ehci1_init(void)
****************************************************************************/
void __init orion5x_eth_init(struct mv643xx_eth_platform_data *eth_data)
{
- orion_ge00_init(eth_data, &orion5x_mbus_dram_info,
+ orion_ge00_init(eth_data,
ORION5X_ETH_PHYS_BASE, IRQ_ORION5X_ETH_SUM,
IRQ_ORION5X_ETH_ERR, orion5x_tclk);
}
@@ -122,8 +120,7 @@ void __init orion5x_i2c_init(void)
****************************************************************************/
void __init orion5x_sata_init(struct mv_sata_platform_data *sata_data)
{
- orion_sata_init(sata_data, &orion5x_mbus_dram_info,
- ORION5X_SATA_PHYS_BASE, IRQ_ORION5X_SATA);
+ orion_sata_init(sata_data, ORION5X_SATA_PHYS_BASE, IRQ_ORION5X_SATA);
}
@@ -159,8 +156,7 @@ void __init orion5x_uart1_init(void)
****************************************************************************/
void __init orion5x_xor_init(void)
{
- orion_xor0_init(&orion5x_mbus_dram_info,
- ORION5X_XOR_PHYS_BASE,
+ orion_xor0_init(ORION5X_XOR_PHYS_BASE,
ORION5X_XOR_PHYS_BASE + 0x200,
IRQ_ORION5X_XOR0, IRQ_ORION5X_XOR1);
}
@@ -170,12 +166,7 @@ void __init orion5x_xor_init(void)
****************************************************************************/
static void __init orion5x_crypto_init(void)
{
- int ret;
-
- ret = orion5x_setup_sram_win();
- if (ret)
- return;
-
+ orion5x_setup_sram_win();
orion_crypto_init(ORION5X_CRYPTO_PHYS_BASE, ORION5X_SRAM_PHYS_BASE,
SZ_8K, IRQ_ORION5X_CESA);
}
diff --git a/arch/arm/mach-orion5x/common.h b/arch/arm/mach-orion5x/common.h
index 37ef18de61b..d2513ac79ff 100644
--- a/arch/arm/mach-orion5x/common.h
+++ b/arch/arm/mach-orion5x/common.h
@@ -20,14 +20,13 @@ extern struct sys_timer orion5x_timer;
* functions to map its interfaces and by the machine-setup to map its on-
* board devices. Details in /mach-orion/addr-map.c
*/
-extern struct mbus_dram_target_info orion5x_mbus_dram_info;
void orion5x_setup_cpu_mbus_bridge(void);
void orion5x_setup_dev_boot_win(u32 base, u32 size);
void orion5x_setup_dev0_win(u32 base, u32 size);
void orion5x_setup_dev1_win(u32 base, u32 size);
void orion5x_setup_dev2_win(u32 base, u32 size);
void orion5x_setup_pcie_wa_win(u32 base, u32 size);
-int orion5x_setup_sram_win(void);
+void orion5x_setup_sram_win(void);
void orion5x_ehci0_init(void);
void orion5x_ehci1_init(void);
diff --git a/arch/arm/mach-orion5x/include/mach/orion5x.h b/arch/arm/mach-orion5x/include/mach/orion5x.h
index 0a28bbc7689..2745f5d95b3 100644
--- a/arch/arm/mach-orion5x/include/mach/orion5x.h
+++ b/arch/arm/mach-orion5x/include/mach/orion5x.h
@@ -69,7 +69,7 @@
******************************************************************************/
#define ORION5X_DDR_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x00000)
-
+#define ORION5X_DDR_WINDOW_CPU_BASE (ORION5X_DDR_VIRT_BASE | 0x1500)
#define ORION5X_DEV_BUS_PHYS_BASE (ORION5X_REGS_PHYS_BASE | 0x10000)
#define ORION5X_DEV_BUS_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x10000)
#define ORION5X_DEV_BUS_REG(x) (ORION5X_DEV_BUS_VIRT_BASE | (x))
diff --git a/arch/arm/mach-orion5x/mpp.c b/arch/arm/mach-orion5x/mpp.c
index b6ddd7a5db6..5b70026f478 100644
--- a/arch/arm/mach-orion5x/mpp.c
+++ b/arch/arm/mach-orion5x/mpp.c
@@ -10,7 +10,6 @@
#include <linux/kernel.h>
#include <linux/init.h>
-#include <linux/mbus.h>
#include <linux/io.h>
#include <mach/hardware.h>
#include <plat/mpp.h>
diff --git a/arch/arm/mach-orion5x/pci.c b/arch/arm/mach-orion5x/pci.c
index bc4a920e26e..a494c470e3e 100644
--- a/arch/arm/mach-orion5x/pci.c
+++ b/arch/arm/mach-orion5x/pci.c
@@ -18,6 +18,7 @@
#include <asm/irq.h>
#include <asm/mach/pci.h>
#include <plat/pcie.h>
+#include <plat/addr-map.h>
#include "common.h"
/*****************************************************************************
@@ -145,7 +146,7 @@ static int __init pcie_setup(struct pci_sys_data *sys)
/*
* Generic PCIe unit setup.
*/
- orion_pcie_setup(PCIE_BASE, &orion5x_mbus_dram_info);
+ orion_pcie_setup(PCIE_BASE);
/*
* Check whether to apply Orion-1/Orion-NAS PCIe config
@@ -477,7 +478,7 @@ static int __init pci_setup(struct pci_sys_data *sys)
/*
* Point PCI unit MBUS decode windows to DRAM space.
*/
- orion5x_setup_pci_wins(&orion5x_mbus_dram_info);
+ orion5x_setup_pci_wins(&orion_mbus_dram_info);
/*
* Master + Slave enable
diff --git a/arch/arm/mach-picoxcell/common.c b/arch/arm/mach-picoxcell/common.c
index febee47bc11..a2e8ae8b582 100644
--- a/arch/arm/mach-picoxcell/common.c
+++ b/arch/arm/mach-picoxcell/common.c
@@ -7,6 +7,7 @@
*
* All enquiries to support@picochip.com
*/
+#include <linux/delay.h>
#include <linux/irq.h>
#include <linux/irqdomain.h>
#include <linux/of.h>
@@ -23,6 +24,26 @@
#include "common.h"
+#define WDT_CTRL_REG_EN_MASK (1 << 0)
+#define WDT_CTRL_REG_OFFS (0x00)
+#define WDT_TIMEOUT_REG_OFFS (0x04)
+static void __iomem *wdt_regs;
+
+/*
+ * The machine restart method can be called from an atomic context so we won't
+ * be able to ioremap the regs then.
+ */
+static void picoxcell_setup_restart(void)
+{
+ struct device_node *np = of_find_compatible_node(NULL, NULL,
+ "snps,dw-apb-wdg");
+ if (WARN(!np, "unable to setup watchdog restart"))
+ return;
+
+ wdt_regs = of_iomap(np, 0);
+ WARN(!wdt_regs, "failed to remap watchdog regs");
+}
+
static struct map_desc io_map __initdata = {
.virtual = PHYS_TO_IO(PICOXCELL_PERIPH_BASE),
.pfn = __phys_to_pfn(PICOXCELL_PERIPH_BASE),
@@ -38,6 +59,7 @@ static void __init picoxcell_map_io(void)
static void __init picoxcell_init_machine(void)
{
of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
+ picoxcell_setup_restart();
}
static const char *picoxcell_dt_match[] = {
@@ -56,6 +78,20 @@ static void __init picoxcell_init_irq(void)
of_irq_init(vic_of_match);
}
+static void picoxcell_wdt_restart(char mode, const char *cmd)
+{
+ /*
+ * Configure the watchdog to reset with the shortest possible timeout
+ * and give it chance to do the reset.
+ */
+ if (wdt_regs) {
+ writel_relaxed(WDT_CTRL_REG_EN_MASK, wdt_regs + WDT_CTRL_REG_OFFS);
+ writel_relaxed(0, wdt_regs + WDT_TIMEOUT_REG_OFFS);
+ /* No sleeping, possibly atomic. */
+ mdelay(500);
+ }
+}
+
DT_MACHINE_START(PICOXCELL, "Picochip picoXcell")
.map_io = picoxcell_map_io,
.nr_irqs = NR_IRQS_LEGACY,
@@ -64,4 +100,5 @@ DT_MACHINE_START(PICOXCELL, "Picochip picoXcell")
.timer = &picoxcell_timer,
.init_machine = picoxcell_init_machine,
.dt_compat = picoxcell_dt_match,
+ .restart = picoxcell_wdt_restart,
MACHINE_END
diff --git a/arch/arm/mach-ux500/board-mop500-sdi.c b/arch/arm/mach-ux500/board-mop500-sdi.c
index 6826faeecc6..23be34b3bb6 100644
--- a/arch/arm/mach-ux500/board-mop500-sdi.c
+++ b/arch/arm/mach-ux500/board-mop500-sdi.c
@@ -22,6 +22,12 @@
#include "ste-dma40-db8500.h"
/*
+ * v2 has a new version of this block that need to be forced, the number found
+ * in hardware is incorrect
+ */
+#define U8500_SDI_V2_PERIPHID 0x10480180
+
+/*
* SDI 0 (MicroSD slot)
*/
@@ -117,10 +123,7 @@ static void sdi0_configure(void)
gpio_direction_output(sdi0_en, 1);
/* Add the device, force v2 to subrevision 1 */
- if (cpu_is_u8500v2())
- db8500_add_sdi0(&mop500_sdi0_data, 0x10480180);
- else
- db8500_add_sdi0(&mop500_sdi0_data, 0);
+ db8500_add_sdi0(&mop500_sdi0_data, U8500_SDI_V2_PERIPHID);
}
void mop500_sdi_tc35892_init(void)
@@ -132,6 +135,42 @@ void mop500_sdi_tc35892_init(void)
}
/*
+ * SDI1 (SDIO WLAN)
+ */
+#ifdef CONFIG_STE_DMA40
+static struct stedma40_chan_cfg sdi1_dma_cfg_rx = {
+ .mode = STEDMA40_MODE_LOGICAL,
+ .dir = STEDMA40_PERIPH_TO_MEM,
+ .src_dev_type = DB8500_DMA_DEV32_SD_MM1_RX,
+ .dst_dev_type = STEDMA40_DEV_DST_MEMORY,
+ .src_info.data_width = STEDMA40_WORD_WIDTH,
+ .dst_info.data_width = STEDMA40_WORD_WIDTH,
+};
+
+static struct stedma40_chan_cfg sdi1_dma_cfg_tx = {
+ .mode = STEDMA40_MODE_LOGICAL,
+ .dir = STEDMA40_MEM_TO_PERIPH,
+ .src_dev_type = STEDMA40_DEV_SRC_MEMORY,
+ .dst_dev_type = DB8500_DMA_DEV32_SD_MM1_TX,
+ .src_info.data_width = STEDMA40_WORD_WIDTH,
+ .dst_info.data_width = STEDMA40_WORD_WIDTH,
+};
+#endif
+
+static struct mmci_platform_data mop500_sdi1_data = {
+ .ocr_mask = MMC_VDD_29_30,
+ .f_max = 50000000,
+ .capabilities = MMC_CAP_4_BIT_DATA,
+ .gpio_cd = -1,
+ .gpio_wp = -1,
+#ifdef CONFIG_STE_DMA40
+ .dma_filter = stedma40_filter,
+ .dma_rx_param = &sdi1_dma_cfg_rx,
+ .dma_tx_param = &sdi1_dma_cfg_tx,
+#endif
+};
+
+/*
* SDI 2 (POP eMMC, not on DB8500ed)
*/
@@ -158,7 +197,8 @@ static struct stedma40_chan_cfg mop500_sdi2_dma_cfg_tx = {
static struct mmci_platform_data mop500_sdi2_data = {
.ocr_mask = MMC_VDD_165_195,
.f_max = 50000000,
- .capabilities = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
+ .capabilities = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA |
+ MMC_CAP_MMC_HIGHSPEED,
.gpio_cd = -1,
.gpio_wp = -1,
#ifdef CONFIG_STE_DMA40
@@ -208,20 +248,10 @@ static struct mmci_platform_data mop500_sdi4_data = {
void __init mop500_sdi_init(void)
{
- u32 periphid = 0;
-
- /* v2 has a new version of this block that need to be forced */
- if (cpu_is_u8500v2())
- periphid = 0x10480180;
- /* PoP:ed eMMC on top of DB8500 v1.0 has problems with high speed */
- if (!cpu_is_u8500v10())
- mop500_sdi2_data.capabilities |= MMC_CAP_MMC_HIGHSPEED;
-
- db8500_add_sdi2(&mop500_sdi2_data, periphid);
-
+ /* PoP:ed eMMC */
+ db8500_add_sdi2(&mop500_sdi2_data, U8500_SDI_V2_PERIPHID);
/* On-board eMMC */
- db8500_add_sdi4(&mop500_sdi4_data, periphid);
-
+ db8500_add_sdi4(&mop500_sdi4_data, U8500_SDI_V2_PERIPHID);
/*
* On boards with the TC35892 GPIO expander, sdi0 will finally
* be added when the TC35892 initializes and calls
@@ -231,13 +261,9 @@ void __init mop500_sdi_init(void)
void __init snowball_sdi_init(void)
{
- u32 periphid = 0x10480180;
-
- mop500_sdi2_data.capabilities |= MMC_CAP_MMC_HIGHSPEED;
-
/* On-board eMMC */
- db8500_add_sdi4(&mop500_sdi4_data, periphid);
-
+ db8500_add_sdi4(&mop500_sdi4_data, U8500_SDI_V2_PERIPHID);
+ /* External Micro SD slot */
mop500_sdi0_data.gpio_cd = SNOWBALL_SDMMC_CD_GPIO;
mop500_sdi0_data.cd_invert = true;
sdi0_en = SNOWBALL_SDMMC_EN_GPIO;
@@ -247,17 +273,15 @@ void __init snowball_sdi_init(void)
void __init hrefv60_sdi_init(void)
{
- u32 periphid = 0x10480180;
-
- mop500_sdi2_data.capabilities |= MMC_CAP_MMC_HIGHSPEED;
-
- db8500_add_sdi2(&mop500_sdi2_data, periphid);
-
+ /* PoP:ed eMMC */
+ db8500_add_sdi2(&mop500_sdi2_data, U8500_SDI_V2_PERIPHID);
/* On-board eMMC */
- db8500_add_sdi4(&mop500_sdi4_data, periphid);
-
+ db8500_add_sdi4(&mop500_sdi4_data, U8500_SDI_V2_PERIPHID);
+ /* External Micro SD slot */
mop500_sdi0_data.gpio_cd = HREFV60_SDMMC_CD_GPIO;
sdi0_en = HREFV60_SDMMC_EN_GPIO;
sdi0_vsel = HREFV60_SDMMC_1V8_3V_GPIO;
sdi0_configure();
+ /* WLAN SDIO channel */
+ db8500_add_sdi1(&mop500_sdi1_data, U8500_SDI_V2_PERIPHID);
}
diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c
index de1f5f8f733..9361a529017 100644
--- a/arch/arm/mach-ux500/board-mop500.c
+++ b/arch/arm/mach-ux500/board-mop500.c
@@ -673,7 +673,7 @@ static void __init hrefv60_init_machine(void)
ARRAY_SIZE(mop500_platform_devs));
mop500_i2c_init();
- mop500_sdi_init();
+ hrefv60_sdi_init();
mop500_spi_init();
mop500_uart_init();
diff --git a/arch/arm/mach-ux500/board-mop500.h b/arch/arm/mach-ux500/board-mop500.h
index de18a2a23e6..f926d3db620 100644
--- a/arch/arm/mach-ux500/board-mop500.h
+++ b/arch/arm/mach-ux500/board-mop500.h
@@ -7,40 +7,77 @@
#ifndef __BOARD_MOP500_H
#define __BOARD_MOP500_H
-/* snowball GPIO for MMC card */
-#define SNOWBALL_SDMMC_EN_GPIO 217
-#define SNOWBALL_SDMMC_1V8_3V_GPIO 228
-#define SNOWBALL_SDMMC_CD_GPIO 218
+/* Snowball specific GPIO assignments, this board has no GPIO expander */
+#define SNOWBALL_ACCEL_INT1_GPIO 163
+#define SNOWBALL_ACCEL_INT2_GPIO 164
+#define SNOWBALL_MAGNET_DRDY_GPIO 165
+#define SNOWBALL_SDMMC_EN_GPIO 217
+#define SNOWBALL_SDMMC_1V8_3V_GPIO 228
+#define SNOWBALL_SDMMC_CD_GPIO 218
/* HREFv60-specific GPIO assignments, this board has no GPIO expander */
-#define HREFV60_TOUCH_RST_GPIO 143
-#define HREFV60_PROX_SENSE_GPIO 217
-#define HREFV60_HAL_SW_GPIO 145
-#define HREFV60_SDMMC_EN_GPIO 169
#define HREFV60_SDMMC_1V8_3V_GPIO 5
-#define HREFV60_SDMMC_CD_GPIO 95
-#define HREFV60_ACCEL_INT1_GPIO 82
-#define HREFV60_ACCEL_INT2_GPIO 83
+#define HREFV60_CAMERA_FLASH_ENABLE 21
#define HREFV60_MAGNET_DRDY_GPIO 32
#define HREFV60_DISP1_RST_GPIO 65
#define HREFV60_DISP2_RST_GPIO 66
+#define HREFV60_ACCEL_INT1_GPIO 82
+#define HREFV60_ACCEL_INT2_GPIO 83
+#define HREFV60_SDMMC_CD_GPIO 95
+#define HREFV60_XSHUTDOWN_SECONDARY_SENSOR 140
+#define HREFV60_TOUCH_RST_GPIO 143
+#define HREFV60_HAL_SW_GPIO 145
+#define HREFV60_SDMMC_EN_GPIO 169
+#define HREFV60_MMIO_XENON_CHARGE 170
+#define HREFV60_PROX_SENSE_GPIO 217
+
+/* MOP500 generic GPIOs */
+#define CAMERA_FLASH_INT_PIN 7
+#define CYPRESS_TOUCH_INT_PIN 84
+#define XSHUTDOWN_PRIMARY_SENSOR 141
+#define XSHUTDOWN_SECONDARY_SENSOR 142
+#define CYPRESS_TOUCH_RST_GPIO 143
+#define MOP500_HDMI_RST_GPIO 196
+#define CYPRESS_SLAVE_SELECT_GPIO 216
/* GPIOs on the TC35892 expander */
#define MOP500_EGPIO(x) (NOMADIK_NR_GPIO + (x))
+#define GPIO_MAGNET_DRDY MOP500_EGPIO(1)
#define GPIO_SDMMC_CD MOP500_EGPIO(3)
+#define GPIO_CAMERA_FLASH_ENABLE MOP500_EGPIO(4)
+#define GPIO_MMIO_XENON_CHARGE MOP500_EGPIO(5)
#define GPIO_PROX_SENSOR MOP500_EGPIO(7)
+#define GPIO_HAL_SENSOR MOP500_EGPIO(8)
+#define GPIO_ACCEL_INT1 MOP500_EGPIO(10)
+#define GPIO_ACCEL_INT2 MOP500_EGPIO(11)
#define GPIO_BU21013_CS MOP500_EGPIO(13)
+#define MOP500_DISP2_RST_GPIO MOP500_EGPIO(14)
+#define MOP500_DISP1_RST_GPIO MOP500_EGPIO(15)
#define GPIO_SDMMC_EN MOP500_EGPIO(17)
#define GPIO_SDMMC_1V8_3V_SEL MOP500_EGPIO(18)
#define MOP500_EGPIO_END MOP500_EGPIO(24)
-/* GPIOs on the AB8500 mixed-signals circuit */
-#define MOP500_AB8500_GPIO(x) (MOP500_EGPIO_END + (x))
+/*
+ * GPIOs on the AB8500 mixed-signals circuit
+ * Notice that we subtract 1 from the number passed into the macro, this is
+ * because the AB8500 GPIO pins are enumbered starting from 1, so the value in
+ * parens matches the GPIO pin number in the data sheet.
+ */
+#define MOP500_AB8500_GPIO(x) (MOP500_EGPIO_END + (x) - 1)
+/*Snowball AB8500 GPIO */
+#define SNOWBALL_VSMPS2_1V8_GPIO MOP500_AB8500_PIN_GPIO(1) /* SYSCLKREQ2/GPIO1 */
+#define SNOWBALL_PM_GPIO1_GPIO MOP500_AB8500_PIN_GPIO(2) /* SYSCLKREQ3/GPIO2 */
+#define SNOWBALL_WLAN_CLK_REQ_GPIO MOP500_AB8500_PIN_GPIO(3) /* SYSCLKREQ4/GPIO3 */
+#define SNOWBALL_PM_GPIO4_GPIO MOP500_AB8500_PIN_GPIO(4) /* SYSCLKREQ6/GPIO4 */
+#define SNOWBALL_EN_3V6_GPIO MOP500_AB8500_PIN_GPIO(16) /* PWMOUT3/GPIO16 */
+#define SNOWBALL_PME_ETH_GPIO MOP500_AB8500_PIN_GPIO(24) /* SYSCLKREQ7/GPIO24 */
+#define SNOWBALL_EN_3V3_ETH_GPIO MOP500_AB8500_PIN_GPIO(26) /* GPIO26 */
struct i2c_board_info;
extern void mop500_sdi_init(void);
extern void snowball_sdi_init(void);
+extern void hrefv60_sdi_init(void);
extern void mop500_sdi_tc35892_init(void);
void __init mop500_u8500uib_init(void);
void __init mop500_stuib_init(void);
diff --git a/arch/arm/mach-ux500/clock.c b/arch/arm/mach-ux500/clock.c
index e832664d1bd..73790753700 100644
--- a/arch/arm/mach-ux500/clock.c
+++ b/arch/arm/mach-ux500/clock.c
@@ -239,23 +239,6 @@ static void clk_prcmu_disable(struct clk *clk)
writel(1 << clk->prcmu_cg_bit, cg_clr_reg);
}
-/* ED doesn't have the combined set/clr registers */
-static void clk_prcmu_ed_enable(struct clk *clk)
-{
- void __iomem *addr = __io_address(U8500_PRCMU_BASE)
- + clk->prcmu_cg_mgt;
-
- writel(readl(addr) | PRCM_MGT_ENABLE, addr);
-}
-
-static void clk_prcmu_ed_disable(struct clk *clk)
-{
- void __iomem *addr = __io_address(U8500_PRCMU_BASE)
- + clk->prcmu_cg_mgt;
-
- writel(readl(addr) & ~PRCM_MGT_ENABLE, addr);
-}
-
static struct clkops clk_prcmu_ops = {
.enable = clk_prcmu_enable,
.disable = clk_prcmu_disable,
@@ -267,7 +250,6 @@ static unsigned int clkrst_base[] = {
[3] = U8500_CLKRST3_BASE,
[5] = U8500_CLKRST5_BASE,
[6] = U8500_CLKRST6_BASE,
- [7] = U8500_CLKRST7_BASE_ED,
};
static void clk_prcc_enable(struct clk *clk)
@@ -321,7 +303,6 @@ static DEFINE_PRCMU_CLK(per2clk, 0x0, 12, PER2CLK);
static DEFINE_PRCMU_CLK(per3clk, 0x0, 13, PER3CLK);
static DEFINE_PRCMU_CLK(per5clk, 0x0, 14, PER5CLK);
static DEFINE_PRCMU_CLK_RATE(per6clk, 0x0, 15, PER6CLK, 133330000);
-static DEFINE_PRCMU_CLK_RATE(per7clk, 0x0, 16, PER7CLK, 100000000);
static DEFINE_PRCMU_CLK(lcdclk, 0x0, 17, LCDCLK);
static DEFINE_PRCMU_CLK(bmlclk, 0x0, 18, BMLCLK);
static DEFINE_PRCMU_CLK(hsitxclk, 0x0, 19, HSITXCLK);
@@ -351,44 +332,28 @@ static DEFINE_PRCMU_CLK(uiccclk, 0x4, 1, UICCCLK); /* v1 */
static DEFINE_PRCC_CLK(1, i2c4, 10, 9, &clk_i2cclk);
static DEFINE_PRCC_CLK(1, gpio0, 9, -1, NULL);
static DEFINE_PRCC_CLK(1, slimbus0, 8, 8, &clk_slimclk);
-static DEFINE_PRCC_CLK(1, spi3_ed, 7, 7, NULL);
-static DEFINE_PRCC_CLK(1, spi3_v1, 7, -1, NULL);
+static DEFINE_PRCC_CLK(1, spi3, 7, -1, NULL);
static DEFINE_PRCC_CLK(1, i2c2, 6, 6, &clk_i2cclk);
static DEFINE_PRCC_CLK(1, sdi0, 5, 5, &clk_sdmmcclk);
-static DEFINE_PRCC_CLK(1, msp1_ed, 4, 4, &clk_msp02clk);
-static DEFINE_PRCC_CLK(1, msp1_v1, 4, 4, &clk_msp1clk);
+static DEFINE_PRCC_CLK(1, msp1, 4, 4, &clk_msp1clk);
static DEFINE_PRCC_CLK(1, msp0, 3, 3, &clk_msp02clk);
static DEFINE_PRCC_CLK(1, i2c1, 2, 2, &clk_i2cclk);
static DEFINE_PRCC_CLK(1, uart1, 1, 1, &clk_uartclk);
static DEFINE_PRCC_CLK(1, uart0, 0, 0, &clk_uartclk);
/* Peripheral Cluster #2 */
-
-static DEFINE_PRCC_CLK(2, gpio1_ed, 12, -1, NULL);
-static DEFINE_PRCC_CLK(2, ssitx_ed, 11, -1, NULL);
-static DEFINE_PRCC_CLK(2, ssirx_ed, 10, -1, NULL);
-static DEFINE_PRCC_CLK(2, spi0_ed, 9, -1, NULL);
-static DEFINE_PRCC_CLK(2, sdi3_ed, 8, 6, &clk_sdmmcclk);
-static DEFINE_PRCC_CLK(2, sdi1_ed, 7, 5, &clk_sdmmcclk);
-static DEFINE_PRCC_CLK(2, msp2_ed, 6, 4, &clk_msp02clk);
-static DEFINE_PRCC_CLK(2, sdi4_ed, 4, 2, &clk_sdmmcclk);
-static DEFINE_PRCC_CLK(2, pwl_ed, 3, 1, NULL);
-static DEFINE_PRCC_CLK(2, spi1_ed, 2, -1, NULL);
-static DEFINE_PRCC_CLK(2, spi2_ed, 1, -1, NULL);
-static DEFINE_PRCC_CLK(2, i2c3_ed, 0, 0, &clk_i2cclk);
-
-static DEFINE_PRCC_CLK(2, gpio1_v1, 11, -1, NULL);
-static DEFINE_PRCC_CLK(2, ssitx_v1, 10, 7, NULL);
-static DEFINE_PRCC_CLK(2, ssirx_v1, 9, 6, NULL);
-static DEFINE_PRCC_CLK(2, spi0_v1, 8, -1, NULL);
-static DEFINE_PRCC_CLK(2, sdi3_v1, 7, 5, &clk_sdmmcclk);
-static DEFINE_PRCC_CLK(2, sdi1_v1, 6, 4, &clk_sdmmcclk);
-static DEFINE_PRCC_CLK(2, msp2_v1, 5, 3, &clk_msp02clk);
-static DEFINE_PRCC_CLK(2, sdi4_v1, 4, 2, &clk_sdmmcclk);
-static DEFINE_PRCC_CLK(2, pwl_v1, 3, 1, NULL);
-static DEFINE_PRCC_CLK(2, spi1_v1, 2, -1, NULL);
-static DEFINE_PRCC_CLK(2, spi2_v1, 1, -1, NULL);
-static DEFINE_PRCC_CLK(2, i2c3_v1, 0, 0, &clk_i2cclk);
+static DEFINE_PRCC_CLK(2, gpio1, 11, -1, NULL);
+static DEFINE_PRCC_CLK(2, ssitx, 10, 7, NULL);
+static DEFINE_PRCC_CLK(2, ssirx, 9, 6, NULL);
+static DEFINE_PRCC_CLK(2, spi0, 8, -1, NULL);
+static DEFINE_PRCC_CLK(2, sdi3, 7, 5, &clk_sdmmcclk);
+static DEFINE_PRCC_CLK(2, sdi1, 6, 4, &clk_sdmmcclk);
+static DEFINE_PRCC_CLK(2, msp2, 5, 3, &clk_msp02clk);
+static DEFINE_PRCC_CLK(2, sdi4, 4, 2, &clk_sdmmcclk);
+static DEFINE_PRCC_CLK(2, pwl, 3, 1, NULL);
+static DEFINE_PRCC_CLK(2, spi1, 2, -1, NULL);
+static DEFINE_PRCC_CLK(2, spi2, 1, -1, NULL);
+static DEFINE_PRCC_CLK(2, i2c3, 0, 0, &clk_i2cclk);
/* Peripheral Cluster #3 */
static DEFINE_PRCC_CLK(3, gpio2, 8, -1, NULL);
@@ -397,49 +362,34 @@ static DEFINE_PRCC_CLK(3, uart2, 6, 6, &clk_uartclk);
static DEFINE_PRCC_CLK(3, ske, 5, 5, &clk_32khz);
static DEFINE_PRCC_CLK(3, sdi2, 4, 4, &clk_sdmmcclk);
static DEFINE_PRCC_CLK(3, i2c0, 3, 3, &clk_i2cclk);
-static DEFINE_PRCC_CLK(3, ssp1_ed, 2, 2, &clk_i2cclk);
-static DEFINE_PRCC_CLK(3, ssp0_ed, 1, 1, &clk_i2cclk);
-static DEFINE_PRCC_CLK(3, ssp1_v1, 2, 2, &clk_sspclk);
-static DEFINE_PRCC_CLK(3, ssp0_v1, 1, 1, &clk_sspclk);
+static DEFINE_PRCC_CLK(3, ssp1, 2, 2, &clk_sspclk);
+static DEFINE_PRCC_CLK(3, ssp0, 1, 1, &clk_sspclk);
static DEFINE_PRCC_CLK(3, fsmc, 0, -1, NULL);
/* Peripheral Cluster #4 is in the always on domain */
/* Peripheral Cluster #5 */
static DEFINE_PRCC_CLK(5, gpio3, 1, -1, NULL);
-static DEFINE_PRCC_CLK(5, usb_ed, 0, 0, &clk_i2cclk);
-static DEFINE_PRCC_CLK(5, usb_v1, 0, 0, NULL);
+static DEFINE_PRCC_CLK(5, usb, 0, 0, NULL);
/* Peripheral Cluster #6 */
/* MTU ID in data */
-static DEFINE_PRCC_CLK_CUSTOM(6, mtu1_v1, 8, -1, NULL, clk_mtu_get_rate, 1);
-static DEFINE_PRCC_CLK_CUSTOM(6, mtu0_v1, 7, -1, NULL, clk_mtu_get_rate, 0);
-static DEFINE_PRCC_CLK(6, cfgreg_v1, 6, 6, NULL);
-static DEFINE_PRCC_CLK(6, dmc_ed, 6, 6, NULL);
+static DEFINE_PRCC_CLK_CUSTOM(6, mtu1, 8, -1, NULL, clk_mtu_get_rate, 1);
+static DEFINE_PRCC_CLK_CUSTOM(6, mtu0, 7, -1, NULL, clk_mtu_get_rate, 0);
+static DEFINE_PRCC_CLK(6, cfgreg, 6, 6, NULL);
static DEFINE_PRCC_CLK(6, hash1, 5, -1, NULL);
-static DEFINE_PRCC_CLK(6, unipro_v1, 4, 1, &clk_uniproclk);
-static DEFINE_PRCC_CLK(6, cryp1_ed, 4, -1, NULL);
+static DEFINE_PRCC_CLK(6, unipro, 4, 1, &clk_uniproclk);
static DEFINE_PRCC_CLK(6, pka, 3, -1, NULL);
static DEFINE_PRCC_CLK(6, hash0, 2, -1, NULL);
static DEFINE_PRCC_CLK(6, cryp0, 1, -1, NULL);
-static DEFINE_PRCC_CLK(6, rng_ed, 0, 0, &clk_i2cclk);
-static DEFINE_PRCC_CLK(6, rng_v1, 0, 0, &clk_rngclk);
-
-/* Peripheral Cluster #7 */
-
-static DEFINE_PRCC_CLK(7, tzpc0_ed, 4, -1, NULL);
-/* MTU ID in data */
-static DEFINE_PRCC_CLK_CUSTOM(7, mtu1_ed, 3, -1, NULL, clk_mtu_get_rate, 1);
-static DEFINE_PRCC_CLK_CUSTOM(7, mtu0_ed, 2, -1, NULL, clk_mtu_get_rate, 0);
-static DEFINE_PRCC_CLK(7, wdg_ed, 1, -1, NULL);
-static DEFINE_PRCC_CLK(7, cfgreg_ed, 0, -1, NULL);
+static DEFINE_PRCC_CLK(6, rng, 0, 0, &clk_rngclk);
static struct clk clk_dummy_apb_pclk = {
.name = "apb_pclk",
};
-static struct clk_lookup u8500_common_clks[] = {
+static struct clk_lookup u8500_clks[] = {
CLK(dummy_apb_pclk, NULL, "apb_pclk"),
/* Peripheral Cluster #1 */
@@ -494,83 +444,41 @@ static struct clk_lookup u8500_common_clks[] = {
CLK(dmaclk, "dma40.0", NULL),
CLK(b2r2clk, "b2r2", NULL),
CLK(tvclk, "tv", NULL),
-};
-static struct clk_lookup u8500_ed_clks[] = {
- /* Peripheral Cluster #1 */
- CLK(spi3_ed, "spi3", NULL),
- CLK(msp1_ed, "msp1", NULL),
-
- /* Peripheral Cluster #2 */
- CLK(gpio1_ed, "gpio.6", NULL),
- CLK(gpio1_ed, "gpio.7", NULL),
- CLK(ssitx_ed, "ssitx", NULL),
- CLK(ssirx_ed, "ssirx", NULL),
- CLK(spi0_ed, "spi0", NULL),
- CLK(sdi3_ed, "sdi3", NULL),
- CLK(sdi1_ed, "sdi1", NULL),
- CLK(msp2_ed, "msp2", NULL),
- CLK(sdi4_ed, "sdi4", NULL),
- CLK(pwl_ed, "pwl", NULL),
- CLK(spi1_ed, "spi1", NULL),
- CLK(spi2_ed, "spi2", NULL),
- CLK(i2c3_ed, "nmk-i2c.3", NULL),
-
- /* Peripheral Cluster #3 */
- CLK(ssp1_ed, "ssp1", NULL),
- CLK(ssp0_ed, "ssp0", NULL),
-
- /* Peripheral Cluster #5 */
- CLK(usb_ed, "musb-ux500.0", "usb"),
-
- /* Peripheral Cluster #6 */
- CLK(dmc_ed, "dmc", NULL),
- CLK(cryp1_ed, "cryp1", NULL),
- CLK(rng_ed, "rng", NULL),
-
- /* Peripheral Cluster #7 */
- CLK(tzpc0_ed, "tzpc0", NULL),
- CLK(mtu1_ed, "mtu1", NULL),
- CLK(mtu0_ed, "mtu0", NULL),
- CLK(wdg_ed, "wdg", NULL),
- CLK(cfgreg_ed, "cfgreg", NULL),
-};
-
-static struct clk_lookup u8500_v1_clks[] = {
/* Peripheral Cluster #1 */
CLK(i2c4, "nmk-i2c.4", NULL),
- CLK(spi3_v1, "spi3", NULL),
- CLK(msp1_v1, "msp1", NULL),
+ CLK(spi3, "spi3", NULL),
+ CLK(msp1, "msp1", NULL),
/* Peripheral Cluster #2 */
- CLK(gpio1_v1, "gpio.6", NULL),
- CLK(gpio1_v1, "gpio.7", NULL),
- CLK(ssitx_v1, "ssitx", NULL),
- CLK(ssirx_v1, "ssirx", NULL),
- CLK(spi0_v1, "spi0", NULL),
- CLK(sdi3_v1, "sdi3", NULL),
- CLK(sdi1_v1, "sdi1", NULL),
- CLK(msp2_v1, "msp2", NULL),
- CLK(sdi4_v1, "sdi4", NULL),
- CLK(pwl_v1, "pwl", NULL),
- CLK(spi1_v1, "spi1", NULL),
- CLK(spi2_v1, "spi2", NULL),
- CLK(i2c3_v1, "nmk-i2c.3", NULL),
+ CLK(gpio1, "gpio.6", NULL),
+ CLK(gpio1, "gpio.7", NULL),
+ CLK(ssitx, "ssitx", NULL),
+ CLK(ssirx, "ssirx", NULL),
+ CLK(spi0, "spi0", NULL),
+ CLK(sdi3, "sdi3", NULL),
+ CLK(sdi1, "sdi1", NULL),
+ CLK(msp2, "msp2", NULL),
+ CLK(sdi4, "sdi4", NULL),
+ CLK(pwl, "pwl", NULL),
+ CLK(spi1, "spi1", NULL),
+ CLK(spi2, "spi2", NULL),
+ CLK(i2c3, "nmk-i2c.3", NULL),
/* Peripheral Cluster #3 */
- CLK(ssp1_v1, "ssp1", NULL),
- CLK(ssp0_v1, "ssp0", NULL),
+ CLK(ssp1, "ssp1", NULL),
+ CLK(ssp0, "ssp0", NULL),
/* Peripheral Cluster #5 */
- CLK(usb_v1, "musb-ux500.0", "usb"),
+ CLK(usb, "musb-ux500.0", "usb"),
/* Peripheral Cluster #6 */
- CLK(mtu1_v1, "mtu1", NULL),
- CLK(mtu0_v1, "mtu0", NULL),
- CLK(cfgreg_v1, "cfgreg", NULL),
+ CLK(mtu1, "mtu1", NULL),
+ CLK(mtu0, "mtu0", NULL),
+ CLK(cfgreg, "cfgreg", NULL),
CLK(hash1, "hash1", NULL),
- CLK(unipro_v1, "unipro", NULL),
- CLK(rng_v1, "rng", NULL),
+ CLK(unipro, "unipro", NULL),
+ CLK(rng, "rng", NULL),
/* PRCMU level clock gating */
@@ -743,7 +651,7 @@ err_out:
late_initcall(clk_debugfs_init);
#endif /* defined(CONFIG_DEBUG_FS) */
-unsigned long clk_smp_twd_rate = 400000000;
+unsigned long clk_smp_twd_rate = 500000000;
unsigned long clk_smp_twd_get_rate(struct clk *clk)
{
@@ -769,7 +677,7 @@ static int clk_twd_cpufreq_transition(struct notifier_block *nb,
if (state == CPUFREQ_PRECHANGE) {
/* Save frequency in simple Hz */
- clk_smp_twd_rate = f->new * 1000;
+ clk_smp_twd_rate = (f->new * 1000) / 2;
}
return NOTIFY_OK;
@@ -790,11 +698,7 @@ late_initcall(clk_init_smp_twd_cpufreq);
int __init clk_init(void)
{
- if (cpu_is_u8500ed()) {
- clk_prcmu_ops.enable = clk_prcmu_ed_enable;
- clk_prcmu_ops.disable = clk_prcmu_ed_disable;
- clk_per6clk.rate = 100000000;
- } else if (cpu_is_u5500()) {
+ if (cpu_is_u5500()) {
/* Clock tree for U5500 not implemented yet */
clk_prcc_ops.enable = clk_prcc_ops.disable = NULL;
clk_prcmu_ops.enable = clk_prcmu_ops.disable = NULL;
@@ -802,20 +706,11 @@ int __init clk_init(void)
clk_sdmmcclk.rate = 99900000;
}
- clkdev_add_table(u8500_common_clks, ARRAY_SIZE(u8500_common_clks));
- if (cpu_is_u8500ed())
- clkdev_add_table(u8500_ed_clks, ARRAY_SIZE(u8500_ed_clks));
- else
- clkdev_add_table(u8500_v1_clks, ARRAY_SIZE(u8500_v1_clks));
-
+ clkdev_add_table(u8500_clks, ARRAY_SIZE(u8500_clks));
clkdev_add(&clk_smp_twd_lookup);
#ifdef CONFIG_DEBUG_FS
- clk_debugfs_add_table(u8500_common_clks, ARRAY_SIZE(u8500_common_clks));
- if (cpu_is_u8500ed())
- clk_debugfs_add_table(u8500_ed_clks, ARRAY_SIZE(u8500_ed_clks));
- else
- clk_debugfs_add_table(u8500_v1_clks, ARRAY_SIZE(u8500_v1_clks));
+ clk_debugfs_add_table(u8500_clks, ARRAY_SIZE(u8500_clks));
#endif
return 0;
}
diff --git a/arch/arm/mach-ux500/cpu-db5500.c b/arch/arm/mach-ux500/cpu-db5500.c
index 5323286b265..18aa5c05c69 100644
--- a/arch/arm/mach-ux500/cpu-db5500.c
+++ b/arch/arm/mach-ux500/cpu-db5500.c
@@ -46,26 +46,6 @@ static struct map_desc u5500_io_desc[] __initdata = {
__IO_DEV_DESC(U5500_PRCMU_TCDM_BASE, SZ_4K),
};
-static struct resource db5500_pmu_resources[] = {
- [0] = {
- .start = IRQ_DB5500_PMU0,
- .end = IRQ_DB5500_PMU0,
- .flags = IORESOURCE_IRQ,
- },
- [1] = {
- .start = IRQ_DB5500_PMU1,
- .end = IRQ_DB5500_PMU1,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device db5500_pmu_device = {
- .name = "arm-pmu",
- .id = ARM_PMU_DEVICE_CPU,
- .num_resources = ARRAY_SIZE(db5500_pmu_resources),
- .resource = db5500_pmu_resources,
-};
-
static struct resource mbox0_resources[] = {
{
.name = "mbox_peer",
@@ -151,7 +131,6 @@ static struct platform_device mbox2_device = {
};
static struct platform_device *db5500_platform_devs[] __initdata = {
- &db5500_pmu_device,
&mbox0_device,
&mbox1_device,
&mbox2_device,
@@ -192,6 +171,25 @@ void __init u5500_map_io(void)
_PRCMU_BASE = __io_address(U5500_PRCMU_BASE);
}
+static void __init db5500_pmu_init(void)
+{
+ struct resource res[] = {
+ [0] = {
+ .start = IRQ_DB5500_PMU0,
+ .end = IRQ_DB5500_PMU0,
+ .flags = IORESOURCE_IRQ,
+ },
+ [1] = {
+ .start = IRQ_DB5500_PMU1,
+ .end = IRQ_DB5500_PMU1,
+ .flags = IORESOURCE_IRQ,
+ },
+ };
+
+ platform_device_register_simple("arm-pmu", ARM_PMU_DEVICE_CPU,
+ res, ARRAY_SIZE(res));
+}
+
static int usb_db5500_rx_dma_cfg[] = {
DB5500_DMA_DEV4_USB_OTG_IEP_1_9,
DB5500_DMA_DEV5_USB_OTG_IEP_2_10,
@@ -217,6 +215,7 @@ static int usb_db5500_tx_dma_cfg[] = {
void __init u5500_init_devices(void)
{
db5500_add_gpios();
+ db5500_pmu_init();
db5500_dma_init();
db5500_add_rtc();
db5500_add_usb(usb_db5500_rx_dma_cfg, usb_db5500_tx_dma_cfg);
diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c
index 7f2729c05db..7176ee7491a 100644
--- a/arch/arm/mach-ux500/cpu-db8500.c
+++ b/arch/arm/mach-ux500/cpu-db8500.c
@@ -1,5 +1,5 @@
/*
- * Copyright (C) 2008-2009 ST-Ericsson
+ * Copyright (C) 2008-2009 ST-Ericsson SA
*
* Author: Srinidhi KASAGAR <srinidhi.kasagar@stericsson.com>
*
@@ -53,19 +53,6 @@ static struct map_desc u8500_io_desc[] __initdata = {
__IO_DEV_DESC(U8500_GPIO1_BASE, SZ_4K),
__IO_DEV_DESC(U8500_GPIO2_BASE, SZ_4K),
__IO_DEV_DESC(U8500_GPIO3_BASE, SZ_4K),
-};
-
-static struct map_desc u8500_ed_io_desc[] __initdata = {
- __IO_DEV_DESC(U8500_MTU0_BASE_ED, SZ_4K),
- __IO_DEV_DESC(U8500_CLKRST7_BASE_ED, SZ_8K),
-};
-
-static struct map_desc u8500_v1_io_desc[] __initdata = {
- __IO_DEV_DESC(U8500_MTU0_BASE, SZ_4K),
- __IO_DEV_DESC(U8500_PRCMU_TCDM_BASE_V1, SZ_4K),
-};
-
-static struct map_desc u8500_v2_io_desc[] __initdata = {
__IO_DEV_DESC(U8500_PRCMU_TCDM_BASE, SZ_4K),
};
@@ -80,13 +67,6 @@ void __init u8500_map_io(void)
iotable_init(u8500_io_desc, ARRAY_SIZE(u8500_io_desc));
- if (cpu_is_u8500ed())
- iotable_init(u8500_ed_io_desc, ARRAY_SIZE(u8500_ed_io_desc));
- else if (cpu_is_u8500v1())
- iotable_init(u8500_v1_io_desc, ARRAY_SIZE(u8500_v1_io_desc));
- else if (cpu_is_u8500v2())
- iotable_init(u8500_v2_io_desc, ARRAY_SIZE(u8500_v2_io_desc));
-
_PRCMU_BASE = __io_address(U8500_PRCMU_BASE);
}
@@ -155,12 +135,9 @@ static resource_size_t __initdata db8500_gpio_base[] = {
static void __init db8500_add_gpios(void)
{
struct nmk_gpio_platform_data pdata = {
- /* No custom data yet */
+ .supports_sleepmode = true,
};
- if (cpu_is_u8500v2())
- pdata.supports_sleepmode = true;
-
dbx500_add_gpios(ARRAY_AND_SIZE(db8500_gpio_base),
IRQ_DB8500_GPIO0, &pdata);
}
@@ -192,9 +169,6 @@ static int usb_db8500_tx_dma_cfg[] = {
*/
void __init u8500_init_devices(void)
{
- if (cpu_is_u8500ed())
- dma40_u8500ed_fixup();
-
db8500_add_rtc();
db8500_add_gpios();
db8500_add_usb(usb_db8500_rx_dma_cfg, usb_db8500_tx_dma_cfg);
diff --git a/arch/arm/mach-ux500/devices-db8500.c b/arch/arm/mach-ux500/devices-db8500.c
index 73b17404b19..a7c6cdc9b11 100644
--- a/arch/arm/mach-ux500/devices-db8500.c
+++ b/arch/arm/mach-ux500/devices-db8500.c
@@ -166,16 +166,6 @@ struct platform_device u8500_dma40_device = {
.resource = dma40_resources
};
-void dma40_u8500ed_fixup(void)
-{
- dma40_plat_data.memcpy = NULL;
- dma40_plat_data.memcpy_len = 0;
- dma40_resources[0].start = U8500_DMA_BASE_ED;
- dma40_resources[0].end = U8500_DMA_BASE_ED + SZ_4K - 1;
- dma40_resources[1].start = U8500_DMA_LCPA_BASE_ED;
- dma40_resources[1].end = U8500_DMA_LCPA_BASE_ED + 2 * SZ_1K - 1;
-}
-
struct resource keypad_resources[] = {
[0] = {
.start = U8500_SKE_BASE,
diff --git a/arch/arm/mach-ux500/id.c b/arch/arm/mach-ux500/id.c
index d35122ebc67..15a0f63b2e2 100644
--- a/arch/arm/mach-ux500/id.c
+++ b/arch/arm/mach-ux500/id.c
@@ -65,6 +65,7 @@ static unsigned int partnumber(unsigned int asicid)
* DB8500v1 0x411fc091 0x9001FFF4 0x008500A0
* DB8500v1.1 0x411fc091 0x9001FFF4 0x008500A1
* DB8500v2 0x412fc091 0x9001DBF4 0x008500B0
+ * DB8520v2.2 0x412fc091 0x9001DBF4 0x008500B2
* DB5500v1 0x412fc091 0x9001FFF4 0x005500A0
*/
@@ -80,9 +81,10 @@ void __init ux500_map_io(void)
addr = 0x9001FFF4;
break;
- case 0x412fc091: /* DB8500v2 / DB5500v1 */
+ case 0x412fc091: /* DB8520 / DB8500v2 / DB5500v1 */
asicid = ux500_read_asicid(0x9001DBF4);
- if (partnumber(asicid) == 0x8500)
+ if (partnumber(asicid) == 0x8500 ||
+ partnumber(asicid) == 0x8520)
/* DB8500v2 */
break;
diff --git a/arch/arm/mach-ux500/include/mach/db5500-regs.h b/arch/arm/mach-ux500/include/mach/db5500-regs.h
index 994b5fe6f85..8e714bcb099 100644
--- a/arch/arm/mach-ux500/include/mach/db5500-regs.h
+++ b/arch/arm/mach-ux500/include/mach/db5500-regs.h
@@ -65,8 +65,11 @@
#define U5500_PRCMU_TIMER_4_BASE (U5500_PER4_BASE + 0x07450)
#define U5500_MSP1_BASE (U5500_PER4_BASE + 0x9000)
#define U5500_GPIO2_BASE (U5500_PER4_BASE + 0xA000)
+#define U5500_MTIMER_BASE (U5500_PER4_BASE + 0xC000)
#define U5500_CDETECT_BASE (U5500_PER4_BASE + 0xF000)
#define U5500_PRCMU_TCDM_BASE (U5500_PER4_BASE + 0x18000)
+#define U5500_PRCMU_TCPM_BASE (U5500_PER4_BASE + 0x10000)
+#define U5500_TPIU_BASE (U5500_PER4_BASE + 0x50000)
#define U5500_SPI0_BASE (U5500_PER5_BASE + 0x0000)
#define U5500_SPI1_BASE (U5500_PER5_BASE + 0x1000)
@@ -125,6 +128,7 @@
#define U5500_ACCCON_BASE (0xBFFF1000)
#define U5500_ACCCON_CPUVEC_RESET_ADDR_OFFSET (0x00000020)
#define U5500_ACCCON_ACC_CPU_CTRL_OFFSET (0x000000BC)
+#define U5500_INTCON_MBOX1_INT_RESET_ADDR (0xBFFD31A4)
#define U5500_ESRAM_BASE 0x40000000
#define U5500_ESRAM_DMA_LCPA_OFFSET 0x10000
diff --git a/arch/arm/mach-ux500/include/mach/db8500-regs.h b/arch/arm/mach-ux500/include/mach/db8500-regs.h
index 751b0e6938d..80e10f50282 100644
--- a/arch/arm/mach-ux500/include/mach/db8500-regs.h
+++ b/arch/arm/mach-ux500/include/mach/db8500-regs.h
@@ -22,7 +22,9 @@
#define U8500_ESRAM_DMA_LCPA_OFFSET 0x10000
#define U8500_DMA_LCPA_BASE (U8500_ESRAM_BANK0 + U8500_ESRAM_DMA_LCPA_OFFSET)
-#define U8500_DMA_LCPA_BASE_ED (U8500_ESRAM_BANK4 + 0x4000)
+
+/* This address fulfills the 256k alignment requirement of the lcla base */
+#define U8500_DMA_LCLA_BASE U8500_ESRAM_BANK4
#define U8500_PER3_BASE 0x80000000
#define U8500_STM_BASE 0x80100000
@@ -40,15 +42,14 @@
#define U8500_ASIC_ID_BASE 0x9001D000
#define U8500_PER6_BASE 0xa03c0000
+#define U8500_PER7_BASE 0xa03d0000
#define U8500_PER5_BASE 0xa03e0000
-#define U8500_PER7_BASE_ED 0xa03d0000
#define U8500_SVA_BASE 0xa0100000
#define U8500_SIA_BASE 0xa0200000
#define U8500_SGA_BASE 0xa0300000
#define U8500_MCDE_BASE 0xa0350000
-#define U8500_DMA_BASE_ED 0xa0362000
#define U8500_DMA_BASE 0x801C0000 /* v1 */
#define U8500_SBAG_BASE 0xa0390000
@@ -66,13 +67,6 @@
#define U8500_GPIO2_BASE (U8500_PER2_BASE + 0xE000)
#define U8500_GPIO3_BASE (U8500_PER5_BASE + 0x1E000)
-/* per7 base addresses */
-#define U8500_CR_BASE_ED (U8500_PER7_BASE_ED + 0x8000)
-#define U8500_MTU0_BASE_ED (U8500_PER7_BASE_ED + 0xa000)
-#define U8500_MTU1_BASE_ED (U8500_PER7_BASE_ED + 0xb000)
-#define U8500_TZPC0_BASE_ED (U8500_PER7_BASE_ED + 0xc000)
-#define U8500_CLKRST7_BASE_ED (U8500_PER7_BASE_ED + 0xf000)
-
#define U8500_UART0_BASE (U8500_PER1_BASE + 0x0000)
#define U8500_UART1_BASE (U8500_PER1_BASE + 0x1000)
@@ -102,12 +96,10 @@
#define U8500_SCR_BASE (U8500_PER4_BASE + 0x05000)
#define U8500_DMC_BASE (U8500_PER4_BASE + 0x06000)
#define U8500_PRCMU_BASE (U8500_PER4_BASE + 0x07000)
-#define U8500_PRCMU_TIMER_3_BASE (U8500_PER4_BASE + 0x07338)
-#define U8500_PRCMU_TIMER_4_BASE (U8500_PER4_BASE + 0x07450)
-#define U8500_PRCMU_TCDM_BASE_V1 (U8500_PER4_BASE + 0x0f000)
#define U8500_PRCMU_TCDM_BASE (U8500_PER4_BASE + 0x68000)
#define U8500_PRCMU_TCPM_BASE (U8500_PER4_BASE + 0x60000)
-
+#define U8500_PRCMU_TIMER_3_BASE (U8500_PER4_BASE + 0x07338)
+#define U8500_PRCMU_TIMER_4_BASE (U8500_PER4_BASE + 0x07450)
/* per3 base addresses */
#define U8500_FSMC_BASE (U8500_PER3_BASE + 0x0000)
diff --git a/arch/arm/mach-ux500/include/mach/devices.h b/arch/arm/mach-ux500/include/mach/devices.h
index 020b6369a30..5f6cb71fc62 100644
--- a/arch/arm/mach-ux500/include/mach/devices.h
+++ b/arch/arm/mach-ux500/include/mach/devices.h
@@ -18,6 +18,4 @@ extern struct amba_device ux500_pl031_device;
extern struct platform_device u8500_dma40_device;
extern struct platform_device ux500_ske_keypad_device;
-void dma40_u8500ed_fixup(void);
-
#endif
diff --git a/arch/arm/mach-ux500/include/mach/hardware.h b/arch/arm/mach-ux500/include/mach/hardware.h
index 470ac52663d..b6ba26a1367 100644
--- a/arch/arm/mach-ux500/include/mach/hardware.h
+++ b/arch/arm/mach-ux500/include/mach/hardware.h
@@ -10,20 +10,21 @@
#ifndef __MACH_HARDWARE_H
#define __MACH_HARDWARE_H
-/* macros to get at IO space when running virtually
+/*
+ * Macros to get at IO space when running virtually
* We dont map all the peripherals, let ioremap do
* this for us. We map only very basic peripherals here.
*/
#define U8500_IO_VIRTUAL 0xf0000000
#define U8500_IO_PHYSICAL 0xa0000000
-/* this macro is used in assembly, so no cast */
+/* This macro is used in assembly, so no cast */
#define IO_ADDRESS(x) \
(((x) & 0x0fffffff) + (((x) >> 4) & 0x0f000000) + U8500_IO_VIRTUAL)
/* typesafe io address */
#define __io_address(n) __io(IO_ADDRESS(n))
-/* used by some plat-nomadik code */
+/* Used by some plat-nomadik code */
#define io_p2v(n) __io_address(n)
#include <mach/db8500-regs.h>
@@ -36,6 +37,5 @@ extern void __iomem *_PRCMU_BASE;
#define ARRAY_AND_SIZE(x) (x), ARRAY_SIZE(x)
-#endif
-
+#endif /* __ASSEMBLY__ */
#endif /* __MACH_HARDWARE_H */
diff --git a/arch/arm/mach-ux500/include/mach/id.h b/arch/arm/mach-ux500/include/mach/id.h
index 02b541a37ee..833d6a6edc9 100644
--- a/arch/arm/mach-ux500/include/mach/id.h
+++ b/arch/arm/mach-ux500/include/mach/id.h
@@ -47,6 +47,30 @@ static inline bool __attribute_const__ cpu_is_u5500(void)
}
/*
+ * 5500 revisions
+ */
+
+static inline bool __attribute_const__ cpu_is_u5500v1(void)
+{
+ return cpu_is_u5500() && (dbx500_revision() & 0xf0) == 0xA0;
+}
+
+static inline bool __attribute_const__ cpu_is_u5500v2(void)
+{
+ return (dbx500_id.revision & 0xf0) == 0xB0;
+}
+
+static inline bool __attribute_const__ cpu_is_u5500v20(void)
+{
+ return cpu_is_u5500() && ((dbx500_revision() & 0xf0) == 0xB0);
+}
+
+static inline bool __attribute_const__ cpu_is_u5500v21(void)
+{
+ return cpu_is_u5500() && (dbx500_revision() == 0xB1);
+}
+
+/*
* 8500 revisions
*/
diff --git a/arch/arm/plat-omap/include/plat/clkdev_omap.h b/arch/arm/plat-omap/include/plat/clkdev_omap.h
index 387a9638991..b299b8d201c 100644
--- a/arch/arm/plat-omap/include/plat/clkdev_omap.h
+++ b/arch/arm/plat-omap/include/plat/clkdev_omap.h
@@ -40,6 +40,7 @@ struct omap_clk {
#define CK_443X (1 << 11)
#define CK_TI816X (1 << 12)
#define CK_446X (1 << 13)
+#define CK_1710 (1 << 15) /* 1710 extra for rate selection */
#define CK_34XX (CK_3430ES1 | CK_3430ES2PLUS)
diff --git a/arch/arm/plat-omap/include/plat/irqs.h b/arch/arm/plat-omap/include/plat/irqs.h
index ebda7382c65..2efd6454bce 100644
--- a/arch/arm/plat-omap/include/plat/irqs.h
+++ b/arch/arm/plat-omap/include/plat/irqs.h
@@ -357,7 +357,7 @@
#define INT_35XX_EMAC_C0_TX_PULSE_IRQ 69
#define INT_35XX_EMAC_C0_MISC_PULSE_IRQ 70
#define INT_35XX_USBOTG_IRQ 71
-#define INT_35XX_UART4 84
+#define INT_35XX_UART4_IRQ 84
#define INT_35XX_CCDC_VD0_IRQ 88
#define INT_35XX_CCDC_VD1_IRQ 92
#define INT_35XX_CCDC_VD2_IRQ 93
diff --git a/arch/arm/plat-omap/include/plat/serial.h b/arch/arm/plat-omap/include/plat/serial.h
index 581851df152..80b6d39c31e 100644
--- a/arch/arm/plat-omap/include/plat/serial.h
+++ b/arch/arm/plat-omap/include/plat/serial.h
@@ -44,6 +44,7 @@
#define OMAP3_UART2_BASE OMAP2_UART2_BASE
#define OMAP3_UART3_BASE 0x49020000
#define OMAP3_UART4_BASE 0x49042000 /* Only on 36xx */
+#define OMAP3_UART4_AM35XX_BASE 0x4809E000 /* Only on AM35xx */
/* OMAP4 serial ports */
#define OMAP4_UART1_BASE OMAP2_UART1_BASE
diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c
index 8b28664d1c6..6b058a621e8 100644
--- a/arch/arm/plat-omap/sram.c
+++ b/arch/arm/plat-omap/sram.c
@@ -141,11 +141,9 @@ static void __init omap_detect_sram(void)
omap_sram_size = 0x32000; /* 200K */
else if (cpu_is_omap15xx())
omap_sram_size = 0x30000; /* 192K */
- else if (cpu_is_omap1610() || cpu_is_omap1621() ||
- cpu_is_omap1710())
+ else if (cpu_is_omap1610() || cpu_is_omap1611() ||
+ cpu_is_omap1621() || cpu_is_omap1710())
omap_sram_size = 0x4000; /* 16K */
- else if (cpu_is_omap1611())
- omap_sram_size = SZ_256K;
else {
pr_err("Could not detect SRAM size\n");
omap_sram_size = 0x4000;
@@ -224,6 +222,9 @@ static void (*_omap_sram_reprogram_clock)(u32 dpllctl, u32 ckctl);
void omap_sram_reprogram_clock(u32 dpllctl, u32 ckctl)
{
BUG_ON(!_omap_sram_reprogram_clock);
+ /* On 730, bit 13 must always be 1 */
+ if (cpu_is_omap7xx())
+ ckctl |= 0x2000;
_omap_sram_reprogram_clock(dpllctl, ckctl);
}
diff --git a/arch/arm/plat-orion/Makefile b/arch/arm/plat-orion/Makefile
index 95a5fc53b6d..c20ce0f5ce3 100644
--- a/arch/arm/plat-orion/Makefile
+++ b/arch/arm/plat-orion/Makefile
@@ -2,7 +2,7 @@
# Makefile for the linux kernel.
#
-obj-y := irq.o pcie.o time.o common.o mpp.o
+obj-y := irq.o pcie.o time.o common.o mpp.o addr-map.o
obj-m :=
obj-n :=
obj- :=
diff --git a/arch/arm/plat-orion/addr-map.c b/arch/arm/plat-orion/addr-map.c
new file mode 100644
index 00000000000..367ca89ac40
--- /dev/null
+++ b/arch/arm/plat-orion/addr-map.c
@@ -0,0 +1,174 @@
+/*
+ * arch/arm/plat-orion/addr-map.c
+ *
+ * Address map functions for Marvell Orion based SoCs
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/mbus.h>
+#include <linux/io.h>
+#include <plat/addr-map.h>
+
+struct mbus_dram_target_info orion_mbus_dram_info;
+
+const struct mbus_dram_target_info *mv_mbus_dram_info(void)
+{
+ return &orion_mbus_dram_info;
+}
+EXPORT_SYMBOL_GPL(mv_mbus_dram_info);
+
+/*
+ * DDR target is the same on all Orion platforms.
+ */
+#define TARGET_DDR 0
+
+/*
+ * Helpers to get DDR bank info
+ */
+#define DDR_BASE_CS_OFF(n) (0x0000 + ((n) << 3))
+#define DDR_SIZE_CS_OFF(n) (0x0004 + ((n) << 3))
+
+/*
+ * CPU Address Decode Windows registers
+ */
+#define WIN_CTRL_OFF 0x0000
+#define WIN_BASE_OFF 0x0004
+#define WIN_REMAP_LO_OFF 0x0008
+#define WIN_REMAP_HI_OFF 0x000c
+
+/*
+ * Default implementation
+ */
+static void __init __iomem *
+orion_win_cfg_base(const struct orion_addr_map_cfg *cfg, int win)
+{
+ return (void __iomem *)(cfg->bridge_virt_base + (win << 4));
+}
+
+/*
+ * Default implementation
+ */
+static int __init orion_cpu_win_can_remap(const struct orion_addr_map_cfg *cfg,
+ const int win)
+{
+ if (win < cfg->remappable_wins)
+ return 1;
+
+ return 0;
+}
+
+void __init orion_setup_cpu_win(const struct orion_addr_map_cfg *cfg,
+ const int win, const u32 base,
+ const u32 size, const u8 target,
+ const u8 attr, const int remap)
+{
+ void __iomem *addr = cfg->win_cfg_base(cfg, win);
+ u32 ctrl, base_high, remap_addr;
+
+ if (win >= cfg->num_wins) {
+ printk(KERN_ERR "setup_cpu_win: trying to allocate window "
+ "%d when only %d allowed\n", win, cfg->num_wins);
+ }
+
+ base_high = base & 0xffff0000;
+ ctrl = ((size - 1) & 0xffff0000) | (attr << 8) | (target << 4) | 1;
+
+ writel(base_high, addr + WIN_BASE_OFF);
+ writel(ctrl, addr + WIN_CTRL_OFF);
+ if (cfg->cpu_win_can_remap(cfg, win)) {
+ if (remap < 0)
+ remap_addr = base;
+ else
+ remap_addr = remap;
+ writel(remap_addr & 0xffff0000, addr + WIN_REMAP_LO_OFF);
+ writel(0, addr + WIN_REMAP_HI_OFF);
+ }
+}
+
+/*
+ * Configure a number of windows.
+ */
+static void __init orion_setup_cpu_wins(const struct orion_addr_map_cfg * cfg,
+ const struct orion_addr_map_info *info)
+{
+ while (info->win != -1) {
+ orion_setup_cpu_win(cfg, info->win, info->base, info->size,
+ info->target, info->attr, info->remap);
+ info++;
+ }
+}
+
+static void __init orion_disable_wins(const struct orion_addr_map_cfg * cfg)
+{
+ void __iomem *addr;
+ int i;
+
+ for (i = 0; i < cfg->num_wins; i++) {
+ addr = cfg->win_cfg_base(cfg, i);
+
+ writel(0, addr + WIN_BASE_OFF);
+ writel(0, addr + WIN_CTRL_OFF);
+ if (cfg->cpu_win_can_remap(cfg, i)) {
+ writel(0, addr + WIN_REMAP_LO_OFF);
+ writel(0, addr + WIN_REMAP_HI_OFF);
+ }
+ }
+}
+
+/*
+ * Disable, clear and configure windows.
+ */
+void __init orion_config_wins(struct orion_addr_map_cfg * cfg,
+ const struct orion_addr_map_info *info)
+{
+ if (!cfg->cpu_win_can_remap)
+ cfg->cpu_win_can_remap = orion_cpu_win_can_remap;
+
+ if (!cfg->win_cfg_base)
+ cfg->win_cfg_base = orion_win_cfg_base;
+
+ orion_disable_wins(cfg);
+
+ if (info)
+ orion_setup_cpu_wins(cfg, info);
+}
+
+/*
+ * Setup MBUS dram target info.
+ */
+void __init orion_setup_cpu_mbus_target(const struct orion_addr_map_cfg *cfg,
+ const u32 ddr_window_cpu_base)
+{
+ void __iomem *addr;
+ int i;
+ int cs;
+
+ orion_mbus_dram_info.mbus_dram_target_id = TARGET_DDR;
+
+ addr = (void __iomem *)ddr_window_cpu_base;
+
+ for (i = 0, cs = 0; i < 4; i++) {
+ u32 base = readl(addr + DDR_BASE_CS_OFF(i));
+ u32 size = readl(addr + DDR_SIZE_CS_OFF(i));
+
+ /*
+ * Chip select enabled?
+ */
+ if (size & 1) {
+ struct mbus_dram_window *w;
+
+ w = &orion_mbus_dram_info.cs[cs++];
+ w->cs_index = i;
+ w->mbus_attr = 0xf & ~(1 << i);
+ w->base = base & 0xffff0000;
+ w->size = (size | 0x0000ffff) + 1;
+ }
+ }
+ orion_mbus_dram_info.num_cs = cs;
+}
diff --git a/arch/arm/plat-orion/common.c b/arch/arm/plat-orion/common.c
index 9e5451b3c8e..e5a2fde29b1 100644
--- a/arch/arm/plat-orion/common.c
+++ b/arch/arm/plat-orion/common.c
@@ -13,7 +13,6 @@
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
#include <linux/serial_8250.h>
-#include <linux/mbus.h>
#include <linux/ata_platform.h>
#include <linux/mv643xx_eth.h>
#include <linux/mv643xx_i2c.h>
@@ -203,13 +202,12 @@ void __init orion_rtc_init(unsigned long mapbase,
****************************************************************************/
static __init void ge_complete(
struct mv643xx_eth_shared_platform_data *orion_ge_shared_data,
- struct mbus_dram_target_info *mbus_dram_info, int tclk,
+ int tclk,
struct resource *orion_ge_resource, unsigned long irq,
struct platform_device *orion_ge_shared,
struct mv643xx_eth_platform_data *eth_data,
struct platform_device *orion_ge)
{
- orion_ge_shared_data->dram = mbus_dram_info;
orion_ge_shared_data->t_clk = tclk;
orion_ge_resource->start = irq;
orion_ge_resource->end = irq;
@@ -259,7 +257,6 @@ static struct platform_device orion_ge00 = {
};
void __init orion_ge00_init(struct mv643xx_eth_platform_data *eth_data,
- struct mbus_dram_target_info *mbus_dram_info,
unsigned long mapbase,
unsigned long irq,
unsigned long irq_err,
@@ -267,7 +264,7 @@ void __init orion_ge00_init(struct mv643xx_eth_platform_data *eth_data,
{
fill_resources(&orion_ge00_shared, orion_ge00_shared_resources,
mapbase + 0x2000, SZ_16K - 1, irq_err);
- ge_complete(&orion_ge00_shared_data, mbus_dram_info, tclk,
+ ge_complete(&orion_ge00_shared_data, tclk,
orion_ge00_resources, irq, &orion_ge00_shared,
eth_data, &orion_ge00);
}
@@ -313,7 +310,6 @@ static struct platform_device orion_ge01 = {
};
void __init orion_ge01_init(struct mv643xx_eth_platform_data *eth_data,
- struct mbus_dram_target_info *mbus_dram_info,
unsigned long mapbase,
unsigned long irq,
unsigned long irq_err,
@@ -321,7 +317,7 @@ void __init orion_ge01_init(struct mv643xx_eth_platform_data *eth_data,
{
fill_resources(&orion_ge01_shared, orion_ge01_shared_resources,
mapbase + 0x2000, SZ_16K - 1, irq_err);
- ge_complete(&orion_ge01_shared_data, mbus_dram_info, tclk,
+ ge_complete(&orion_ge01_shared_data, tclk,
orion_ge01_resources, irq, &orion_ge01_shared,
eth_data, &orion_ge01);
}
@@ -367,7 +363,6 @@ static struct platform_device orion_ge10 = {
};
void __init orion_ge10_init(struct mv643xx_eth_platform_data *eth_data,
- struct mbus_dram_target_info *mbus_dram_info,
unsigned long mapbase,
unsigned long irq,
unsigned long irq_err,
@@ -375,7 +370,7 @@ void __init orion_ge10_init(struct mv643xx_eth_platform_data *eth_data,
{
fill_resources(&orion_ge10_shared, orion_ge10_shared_resources,
mapbase + 0x2000, SZ_16K - 1, irq_err);
- ge_complete(&orion_ge10_shared_data, mbus_dram_info, tclk,
+ ge_complete(&orion_ge10_shared_data, tclk,
orion_ge10_resources, irq, &orion_ge10_shared,
eth_data, &orion_ge10);
}
@@ -421,7 +416,6 @@ static struct platform_device orion_ge11 = {
};
void __init orion_ge11_init(struct mv643xx_eth_platform_data *eth_data,
- struct mbus_dram_target_info *mbus_dram_info,
unsigned long mapbase,
unsigned long irq,
unsigned long irq_err,
@@ -429,7 +423,7 @@ void __init orion_ge11_init(struct mv643xx_eth_platform_data *eth_data,
{
fill_resources(&orion_ge11_shared, orion_ge11_shared_resources,
mapbase + 0x2000, SZ_16K - 1, irq_err);
- ge_complete(&orion_ge11_shared_data, mbus_dram_info, tclk,
+ ge_complete(&orion_ge11_shared_data, tclk,
orion_ge11_resources, irq, &orion_ge11_shared,
eth_data, &orion_ge11);
}
@@ -592,8 +586,6 @@ void __init orion_wdt_init(unsigned long tclk)
/*****************************************************************************
* XOR
****************************************************************************/
-static struct mv_xor_platform_shared_data orion_xor_shared_data;
-
static u64 orion_xor_dmamask = DMA_BIT_MASK(32);
void __init orion_xor_init_channels(
@@ -632,9 +624,6 @@ static struct resource orion_xor0_shared_resources[] = {
static struct platform_device orion_xor0_shared = {
.name = MV_XOR_SHARED_NAME,
.id = 0,
- .dev = {
- .platform_data = &orion_xor_shared_data,
- },
.num_resources = ARRAY_SIZE(orion_xor0_shared_resources),
.resource = orion_xor0_shared_resources,
};
@@ -687,14 +676,11 @@ static struct platform_device orion_xor01_channel = {
},
};
-void __init orion_xor0_init(struct mbus_dram_target_info *mbus_dram_info,
- unsigned long mapbase_low,
+void __init orion_xor0_init(unsigned long mapbase_low,
unsigned long mapbase_high,
unsigned long irq_0,
unsigned long irq_1)
{
- orion_xor_shared_data.dram = mbus_dram_info;
-
orion_xor0_shared_resources[0].start = mapbase_low;
orion_xor0_shared_resources[0].end = mapbase_low + 0xff;
orion_xor0_shared_resources[1].start = mapbase_high;
@@ -727,9 +713,6 @@ static struct resource orion_xor1_shared_resources[] = {
static struct platform_device orion_xor1_shared = {
.name = MV_XOR_SHARED_NAME,
.id = 1,
- .dev = {
- .platform_data = &orion_xor_shared_data,
- },
.num_resources = ARRAY_SIZE(orion_xor1_shared_resources),
.resource = orion_xor1_shared_resources,
};
@@ -828,11 +811,9 @@ static struct platform_device orion_ehci = {
},
};
-void __init orion_ehci_init(struct mbus_dram_target_info *mbus_dram_info,
- unsigned long mapbase,
+void __init orion_ehci_init(unsigned long mapbase,
unsigned long irq)
{
- orion_ehci_data.dram = mbus_dram_info;
fill_resources(&orion_ehci, orion_ehci_resources, mapbase, SZ_4K - 1,
irq);
@@ -854,11 +835,9 @@ static struct platform_device orion_ehci_1 = {
},
};
-void __init orion_ehci_1_init(struct mbus_dram_target_info *mbus_dram_info,
- unsigned long mapbase,
+void __init orion_ehci_1_init(unsigned long mapbase,
unsigned long irq)
{
- orion_ehci_data.dram = mbus_dram_info;
fill_resources(&orion_ehci_1, orion_ehci_1_resources,
mapbase, SZ_4K - 1, irq);
@@ -880,11 +859,9 @@ static struct platform_device orion_ehci_2 = {
},
};
-void __init orion_ehci_2_init(struct mbus_dram_target_info *mbus_dram_info,
- unsigned long mapbase,
+void __init orion_ehci_2_init(unsigned long mapbase,
unsigned long irq)
{
- orion_ehci_data.dram = mbus_dram_info;
fill_resources(&orion_ehci_2, orion_ehci_2_resources,
mapbase, SZ_4K - 1, irq);
@@ -911,11 +888,9 @@ static struct platform_device orion_sata = {
};
void __init orion_sata_init(struct mv_sata_platform_data *sata_data,
- struct mbus_dram_target_info *mbus_dram_info,
unsigned long mapbase,
unsigned long irq)
{
- sata_data->dram = mbus_dram_info;
orion_sata.dev.platform_data = sata_data;
fill_resources(&orion_sata, orion_sata_resources,
mapbase, 0x5000 - 1, irq);
diff --git a/arch/arm/plat-orion/include/plat/addr-map.h b/arch/arm/plat-orion/include/plat/addr-map.h
new file mode 100644
index 00000000000..fd556f77562
--- /dev/null
+++ b/arch/arm/plat-orion/include/plat/addr-map.h
@@ -0,0 +1,53 @@
+/*
+ * arch/arm/plat-orion/include/plat/addr-map.h
+ *
+ * Marvell Orion SoC address map handling.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __PLAT_ADDR_MAP_H
+#define __PLAT_ADDR_MAP_H
+
+extern struct mbus_dram_target_info orion_mbus_dram_info;
+
+struct orion_addr_map_cfg {
+ const int num_wins; /* Total number of windows */
+ const int remappable_wins;
+ const u32 bridge_virt_base;
+
+ /* If NULL, the default cpu_win_can_remap will be used, using
+ the value in remappable_wins */
+ int (*cpu_win_can_remap) (const struct orion_addr_map_cfg *cfg,
+ const int win);
+ /* If NULL, the default win_cfg_base will be used, using the
+ value in bridge_virt_base */
+ void __iomem *(*win_cfg_base) (const struct orion_addr_map_cfg *cfg,
+ const int win);
+};
+
+/*
+ * Information needed to setup one address mapping.
+ */
+struct orion_addr_map_info {
+ const int win;
+ const u32 base;
+ const u32 size;
+ const u8 target;
+ const u8 attr;
+ const int remap;
+};
+
+void __init orion_config_wins(struct orion_addr_map_cfg *cfg,
+ const struct orion_addr_map_info *info);
+
+void __init orion_setup_cpu_win(const struct orion_addr_map_cfg *cfg,
+ const int win, const u32 base,
+ const u32 size, const u8 target,
+ const u8 attr, const int remap);
+
+void __init orion_setup_cpu_mbus_target(const struct orion_addr_map_cfg *cfg,
+ const u32 ddr_window_cpu_base);
+#endif
diff --git a/arch/arm/plat-orion/include/plat/audio.h b/arch/arm/plat-orion/include/plat/audio.h
index 9cf1f781329..885f8abd927 100644
--- a/arch/arm/plat-orion/include/plat/audio.h
+++ b/arch/arm/plat-orion/include/plat/audio.h
@@ -1,11 +1,8 @@
#ifndef __PLAT_AUDIO_H
#define __PLAT_AUDIO_H
-#include <linux/mbus.h>
-
struct kirkwood_asoc_platform_data {
u32 tclk;
- struct mbus_dram_target_info *dram;
int burst;
};
#endif
diff --git a/arch/arm/plat-orion/include/plat/common.h b/arch/arm/plat-orion/include/plat/common.h
index a63c357e2ab..0fe08d77e83 100644
--- a/arch/arm/plat-orion/include/plat/common.h
+++ b/arch/arm/plat-orion/include/plat/common.h
@@ -37,28 +37,24 @@ void __init orion_rtc_init(unsigned long mapbase,
unsigned long irq);
void __init orion_ge00_init(struct mv643xx_eth_platform_data *eth_data,
- struct mbus_dram_target_info *mbus_dram_info,
unsigned long mapbase,
unsigned long irq,
unsigned long irq_err,
int tclk);
void __init orion_ge01_init(struct mv643xx_eth_platform_data *eth_data,
- struct mbus_dram_target_info *mbus_dram_info,
unsigned long mapbase,
unsigned long irq,
unsigned long irq_err,
int tclk);
void __init orion_ge10_init(struct mv643xx_eth_platform_data *eth_data,
- struct mbus_dram_target_info *mbus_dram_info,
unsigned long mapbase,
unsigned long irq,
unsigned long irq_err,
int tclk);
void __init orion_ge11_init(struct mv643xx_eth_platform_data *eth_data,
- struct mbus_dram_target_info *mbus_dram_info,
unsigned long mapbase,
unsigned long irq,
unsigned long irq_err,
@@ -82,8 +78,7 @@ void __init orion_spi_1_init(unsigned long mapbase,
void __init orion_wdt_init(unsigned long tclk);
-void __init orion_xor0_init(struct mbus_dram_target_info *mbus_dram_info,
- unsigned long mapbase_low,
+void __init orion_xor0_init(unsigned long mapbase_low,
unsigned long mapbase_high,
unsigned long irq_0,
unsigned long irq_1);
@@ -93,20 +88,16 @@ void __init orion_xor1_init(unsigned long mapbase_low,
unsigned long irq_0,
unsigned long irq_1);
-void __init orion_ehci_init(struct mbus_dram_target_info *mbus_dram_info,
- unsigned long mapbase,
+void __init orion_ehci_init(unsigned long mapbase,
unsigned long irq);
-void __init orion_ehci_1_init(struct mbus_dram_target_info *mbus_dram_info,
- unsigned long mapbase,
+void __init orion_ehci_1_init(unsigned long mapbase,
unsigned long irq);
-void __init orion_ehci_2_init(struct mbus_dram_target_info *mbus_dram_info,
- unsigned long mapbase,
+void __init orion_ehci_2_init(unsigned long mapbase,
unsigned long irq);
void __init orion_sata_init(struct mv_sata_platform_data *sata_data,
- struct mbus_dram_target_info *mbus_dram_info,
unsigned long mapbase,
unsigned long irq);
diff --git a/arch/arm/plat-orion/include/plat/ehci-orion.h b/arch/arm/plat-orion/include/plat/ehci-orion.h
index 4ec668e7746..6fc78e43042 100644
--- a/arch/arm/plat-orion/include/plat/ehci-orion.h
+++ b/arch/arm/plat-orion/include/plat/ehci-orion.h
@@ -19,7 +19,6 @@ enum orion_ehci_phy_ver {
};
struct orion_ehci_data {
- struct mbus_dram_target_info *dram;
enum orion_ehci_phy_ver phy_version;
};
diff --git a/arch/arm/plat-orion/include/plat/mv_xor.h b/arch/arm/plat-orion/include/plat/mv_xor.h
index bd5f3bdb4ae..2ba1f7d76ee 100644
--- a/arch/arm/plat-orion/include/plat/mv_xor.h
+++ b/arch/arm/plat-orion/include/plat/mv_xor.h
@@ -13,12 +13,6 @@
#define MV_XOR_SHARED_NAME "mv_xor_shared"
#define MV_XOR_NAME "mv_xor"
-struct mbus_dram_target_info;
-
-struct mv_xor_platform_shared_data {
- struct mbus_dram_target_info *dram;
-};
-
struct mv_xor_platform_data {
struct platform_device *shared;
int hw_id;
diff --git a/arch/arm/plat-orion/include/plat/mvsdio.h b/arch/arm/plat-orion/include/plat/mvsdio.h
index 14ca8867600..1190efedcb9 100644
--- a/arch/arm/plat-orion/include/plat/mvsdio.h
+++ b/arch/arm/plat-orion/include/plat/mvsdio.h
@@ -12,7 +12,6 @@
#include <linux/mbus.h>
struct mvsdio_platform_data {
- struct mbus_dram_target_info *dram;
unsigned int clock;
int gpio_card_detect;
int gpio_write_protect;
diff --git a/arch/arm/plat-orion/include/plat/pcie.h b/arch/arm/plat-orion/include/plat/pcie.h
index cc99163e73f..fe5b9e86274 100644
--- a/arch/arm/plat-orion/include/plat/pcie.h
+++ b/arch/arm/plat-orion/include/plat/pcie.h
@@ -20,8 +20,7 @@ int orion_pcie_x4_mode(void __iomem *base);
int orion_pcie_get_local_bus_nr(void __iomem *base);
void orion_pcie_set_local_bus_nr(void __iomem *base, int nr);
void orion_pcie_reset(void __iomem *base);
-void orion_pcie_setup(void __iomem *base,
- struct mbus_dram_target_info *dram);
+void orion_pcie_setup(void __iomem *base);
int orion_pcie_rd_conf(void __iomem *base, struct pci_bus *bus,
u32 devfn, int where, int size, u32 *val);
int orion_pcie_rd_conf_tlp(void __iomem *base, struct pci_bus *bus,
diff --git a/arch/arm/plat-orion/pcie.c b/arch/arm/plat-orion/pcie.c
index af2d733c50b..86dbb5bdb17 100644
--- a/arch/arm/plat-orion/pcie.c
+++ b/arch/arm/plat-orion/pcie.c
@@ -13,6 +13,7 @@
#include <linux/mbus.h>
#include <asm/mach/pci.h>
#include <plat/pcie.h>
+#include <plat/addr-map.h>
#include <linux/delay.h>
/*
@@ -175,8 +176,7 @@ static void __init orion_pcie_setup_wins(void __iomem *base,
writel(((size - 1) & 0xffff0000) | 1, base + PCIE_BAR_CTRL_OFF(1));
}
-void __init orion_pcie_setup(void __iomem *base,
- struct mbus_dram_target_info *dram)
+void __init orion_pcie_setup(void __iomem *base)
{
u16 cmd;
u32 mask;
@@ -184,7 +184,7 @@ void __init orion_pcie_setup(void __iomem *base,
/*
* Point PCIe unit MBUS decode windows to DRAM space.
*/
- orion_pcie_setup_wins(base, dram);
+ orion_pcie_setup_wins(base, &orion_mbus_dram_info);
/*
* Master + slave enable.
diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c
index 0b8b8b488ee..38950ea8398 100644
--- a/drivers/ata/sata_mv.c
+++ b/drivers/ata/sata_mv.c
@@ -3988,7 +3988,7 @@ static int mv_create_dma_pools(struct mv_host_priv *hpriv, struct device *dev)
}
static void mv_conf_mbus_windows(struct mv_host_priv *hpriv,
- struct mbus_dram_target_info *dram)
+ const struct mbus_dram_target_info *dram)
{
int i;
@@ -3998,7 +3998,7 @@ static void mv_conf_mbus_windows(struct mv_host_priv *hpriv,
}
for (i = 0; i < dram->num_cs; i++) {
- struct mbus_dram_window *cs = dram->cs + i;
+ const struct mbus_dram_window *cs = dram->cs + i;
writel(((cs->size - 1) & 0xffff0000) |
(cs->mbus_attr << 8) |
@@ -4019,6 +4019,7 @@ static void mv_conf_mbus_windows(struct mv_host_priv *hpriv,
static int mv_platform_probe(struct platform_device *pdev)
{
const struct mv_sata_platform_data *mv_platform_data;
+ const struct mbus_dram_target_info *dram;
const struct ata_port_info *ppi[] =
{ &mv_port_info[chip_soc], NULL };
struct ata_host *host;
@@ -4072,8 +4073,9 @@ static int mv_platform_probe(struct platform_device *pdev)
/*
* (Re-)program MBUS remapping windows if we are asked to.
*/
- if (mv_platform_data->dram != NULL)
- mv_conf_mbus_windows(hpriv, mv_platform_data->dram);
+ dram = mv_mbus_dram_info();
+ if (dram)
+ mv_conf_mbus_windows(hpriv, dram);
rc = mv_create_dma_pools(hpriv, &pdev->dev);
if (rc)
@@ -4141,17 +4143,18 @@ static int mv_platform_suspend(struct platform_device *pdev, pm_message_t state)
static int mv_platform_resume(struct platform_device *pdev)
{
struct ata_host *host = platform_get_drvdata(pdev);
+ const struct mbus_dram_target_info *dram;
int ret;
if (host) {
struct mv_host_priv *hpriv = host->private_data;
- const struct mv_sata_platform_data *mv_platform_data = \
- pdev->dev.platform_data;
+
/*
* (Re-)program MBUS remapping windows if we are asked to.
*/
- if (mv_platform_data->dram != NULL)
- mv_conf_mbus_windows(hpriv, mv_platform_data->dram);
+ dram = mv_mbus_dram_info();
+ if (dram)
+ mv_conf_mbus_windows(hpriv, dram);
/* initialize adapter */
ret = mv_init_host(host);
diff --git a/drivers/dma/mv_xor.c b/drivers/dma/mv_xor.c
index 9a353c2216d..e779b434af4 100644
--- a/drivers/dma/mv_xor.c
+++ b/drivers/dma/mv_xor.c
@@ -1250,7 +1250,7 @@ static int __devinit mv_xor_probe(struct platform_device *pdev)
static void
mv_xor_conf_mbus_windows(struct mv_xor_shared_private *msp,
- struct mbus_dram_target_info *dram)
+ const struct mbus_dram_target_info *dram)
{
void __iomem *base = msp->xor_base;
u32 win_enable = 0;
@@ -1264,7 +1264,7 @@ mv_xor_conf_mbus_windows(struct mv_xor_shared_private *msp,
}
for (i = 0; i < dram->num_cs; i++) {
- struct mbus_dram_window *cs = dram->cs + i;
+ const struct mbus_dram_window *cs = dram->cs + i;
writel((cs->base & 0xffff0000) |
(cs->mbus_attr << 8) |
@@ -1290,7 +1290,7 @@ static struct platform_driver mv_xor_driver = {
static int mv_xor_shared_probe(struct platform_device *pdev)
{
- struct mv_xor_platform_shared_data *msd = pdev->dev.platform_data;
+ const struct mbus_dram_target_info *dram;
struct mv_xor_shared_private *msp;
struct resource *res;
@@ -1323,8 +1323,9 @@ static int mv_xor_shared_probe(struct platform_device *pdev)
/*
* (Re-)program MBUS remapping windows if we are asked to.
*/
- if (msd != NULL && msd->dram != NULL)
- mv_xor_conf_mbus_windows(msp, msd->dram);
+ dram = mv_mbus_dram_info();
+ if (dram)
+ mv_xor_conf_mbus_windows(msp, dram);
return 0;
}
diff --git a/drivers/mfd/db8500-prcmu.c b/drivers/mfd/db8500-prcmu.c
index a25ab9c6b5a..af8e0efedbe 100644
--- a/drivers/mfd/db8500-prcmu.c
+++ b/drivers/mfd/db8500-prcmu.c
@@ -2102,14 +2102,11 @@ static struct irq_chip prcmu_irq_chip = {
void __init db8500_prcmu_early_init(void)
{
unsigned int i;
-
- if (cpu_is_u8500v1()) {
- tcdm_base = __io_address(U8500_PRCMU_TCDM_BASE_V1);
- } else if (cpu_is_u8500v2()) {
+ if (cpu_is_u8500v2()) {
void *tcpm_base = ioremap_nocache(U8500_PRCMU_TCPM_BASE, SZ_4K);
if (tcpm_base != NULL) {
- int version;
+ u32 version;
version = readl(tcpm_base + PRCMU_FW_VERSION_OFFSET);
prcmu_version.project_number = version & 0xFF;
prcmu_version.api_version = (version >> 8) & 0xFF;
diff --git a/drivers/mmc/host/mvsdio.c b/drivers/mmc/host/mvsdio.c
index 211a4959c29..eeb8cd125b0 100644
--- a/drivers/mmc/host/mvsdio.c
+++ b/drivers/mmc/host/mvsdio.c
@@ -679,8 +679,9 @@ static const struct mmc_host_ops mvsd_ops = {
.enable_sdio_irq = mvsd_enable_sdio_irq,
};
-static void __init mv_conf_mbus_windows(struct mvsd_host *host,
- struct mbus_dram_target_info *dram)
+static void __init
+mv_conf_mbus_windows(struct mvsd_host *host,
+ const struct mbus_dram_target_info *dram)
{
void __iomem *iobase = host->base;
int i;
@@ -691,7 +692,7 @@ static void __init mv_conf_mbus_windows(struct mvsd_host *host,
}
for (i = 0; i < dram->num_cs; i++) {
- struct mbus_dram_window *cs = dram->cs + i;
+ const struct mbus_dram_window *cs = dram->cs + i;
writel(((cs->size - 1) & 0xffff0000) |
(cs->mbus_attr << 8) |
(dram->mbus_dram_target_id << 4) | 1,
@@ -705,6 +706,7 @@ static int __init mvsd_probe(struct platform_device *pdev)
struct mmc_host *mmc = NULL;
struct mvsd_host *host = NULL;
const struct mvsdio_platform_data *mvsd_data;
+ const struct mbus_dram_target_info *dram;
struct resource *r;
int ret, irq;
@@ -755,8 +757,9 @@ static int __init mvsd_probe(struct platform_device *pdev)
}
/* (Re-)program MBUS remapping windows if we are asked to. */
- if (mvsd_data->dram != NULL)
- mv_conf_mbus_windows(host, mvsd_data->dram);
+ dram = mv_mbus_dram_info();
+ if (dram)
+ mv_conf_mbus_windows(host, dram);
mvsd_power_down(host);
diff --git a/drivers/net/ethernet/marvell/mv643xx_eth.c b/drivers/net/ethernet/marvell/mv643xx_eth.c
index e87847e32dd..80aab4e5d69 100644
--- a/drivers/net/ethernet/marvell/mv643xx_eth.c
+++ b/drivers/net/ethernet/marvell/mv643xx_eth.c
@@ -2511,7 +2511,7 @@ static void mv643xx_eth_netpoll(struct net_device *dev)
/* platform glue ************************************************************/
static void
mv643xx_eth_conf_mbus_windows(struct mv643xx_eth_shared_private *msp,
- struct mbus_dram_target_info *dram)
+ const struct mbus_dram_target_info *dram)
{
void __iomem *base = msp->base;
u32 win_enable;
@@ -2529,7 +2529,7 @@ mv643xx_eth_conf_mbus_windows(struct mv643xx_eth_shared_private *msp,
win_protect = 0;
for (i = 0; i < dram->num_cs; i++) {
- struct mbus_dram_window *cs = dram->cs + i;
+ const struct mbus_dram_window *cs = dram->cs + i;
writel((cs->base & 0xffff0000) |
(cs->mbus_attr << 8) |
@@ -2579,6 +2579,7 @@ static int mv643xx_eth_shared_probe(struct platform_device *pdev)
static int mv643xx_eth_version_printed;
struct mv643xx_eth_shared_platform_data *pd = pdev->dev.platform_data;
struct mv643xx_eth_shared_private *msp;
+ const struct mbus_dram_target_info *dram;
struct resource *res;
int ret;
@@ -2643,8 +2644,9 @@ static int mv643xx_eth_shared_probe(struct platform_device *pdev)
/*
* (Re-)program MBUS remapping windows if we are asked to.
*/
- if (pd != NULL && pd->dram != NULL)
- mv643xx_eth_conf_mbus_windows(msp, pd->dram);
+ dram = mv_mbus_dram_info();
+ if (dram)
+ mv643xx_eth_conf_mbus_windows(msp, dram);
/*
* Detect hardware parameters.
diff --git a/drivers/usb/host/ehci-orion.c b/drivers/usb/host/ehci-orion.c
index a68a2a5c4b8..6c6a5a3b4ea 100644
--- a/drivers/usb/host/ehci-orion.c
+++ b/drivers/usb/host/ehci-orion.c
@@ -172,7 +172,7 @@ static const struct hc_driver ehci_orion_hc_driver = {
static void __init
ehci_orion_conf_mbus_windows(struct usb_hcd *hcd,
- struct mbus_dram_target_info *dram)
+ const struct mbus_dram_target_info *dram)
{
int i;
@@ -182,7 +182,7 @@ ehci_orion_conf_mbus_windows(struct usb_hcd *hcd,
}
for (i = 0; i < dram->num_cs; i++) {
- struct mbus_dram_window *cs = dram->cs + i;
+ const struct mbus_dram_window *cs = dram->cs + i;
wrl(USB_WINDOW_CTRL(i), ((cs->size - 1) & 0xffff0000) |
(cs->mbus_attr << 8) |
@@ -194,6 +194,7 @@ ehci_orion_conf_mbus_windows(struct usb_hcd *hcd,
static int __devinit ehci_orion_drv_probe(struct platform_device *pdev)
{
struct orion_ehci_data *pd = pdev->dev.platform_data;
+ const struct mbus_dram_target_info *dram;
struct resource *res;
struct usb_hcd *hcd;
struct ehci_hcd *ehci;
@@ -259,8 +260,9 @@ static int __devinit ehci_orion_drv_probe(struct platform_device *pdev)
/*
* (Re-)program MBUS remapping windows if we are asked to.
*/
- if (pd != NULL && pd->dram != NULL)
- ehci_orion_conf_mbus_windows(hcd, pd->dram);
+ dram = mv_mbus_dram_info();
+ if (dram)
+ ehci_orion_conf_mbus_windows(hcd, dram);
/*
* setup Orion USB controller.
diff --git a/include/linux/ata_platform.h b/include/linux/ata_platform.h
index 9a26c83a2c9..b856a2a590d 100644
--- a/include/linux/ata_platform.h
+++ b/include/linux/ata_platform.h
@@ -27,10 +27,7 @@ extern int __devexit __pata_platform_remove(struct device *dev);
/*
* Marvell SATA private data
*/
-struct mbus_dram_target_info;
-
struct mv_sata_platform_data {
- struct mbus_dram_target_info *dram;
int n_ports; /* number of sata ports */
};
diff --git a/include/linux/mbus.h b/include/linux/mbus.h
index c11ff293254..efa1a6d7aca 100644
--- a/include/linux/mbus.h
+++ b/include/linux/mbus.h
@@ -32,5 +32,16 @@ struct mbus_dram_target_info
} cs[4];
};
-
+/*
+ * The Marvell mbus is to be found only on SOCs from the Orion family
+ * at the moment. Provide a dummy stub for other architectures.
+ */
+#ifdef CONFIG_PLAT_ORION
+extern const struct mbus_dram_target_info *mv_mbus_dram_info(void);
+#else
+static inline const struct mbus_dram_target_info *mv_mbus_dram_info(void)
+{
+ return NULL;
+}
+#endif
#endif
diff --git a/sound/soc/kirkwood/kirkwood-dma.c b/sound/soc/kirkwood/kirkwood-dma.c
index cd33de1c5b7..df12e0993f5 100644
--- a/sound/soc/kirkwood/kirkwood-dma.c
+++ b/sound/soc/kirkwood/kirkwood-dma.c
@@ -94,9 +94,10 @@ static irqreturn_t kirkwood_dma_irq(int irq, void *dev_id)
return IRQ_HANDLED;
}
-static void kirkwood_dma_conf_mbus_windows(void __iomem *base, int win,
- unsigned long dma,
- struct mbus_dram_target_info *dram)
+static void
+kirkwood_dma_conf_mbus_windows(void __iomem *base, int win,
+ unsigned long dma,
+ const struct mbus_dram_target_info *dram)
{
int i;
@@ -106,7 +107,7 @@ static void kirkwood_dma_conf_mbus_windows(void __iomem *base, int win,
/* try to find matching cs for current dma address */
for (i = 0; i < dram->num_cs; i++) {
- struct mbus_dram_window *cs = dram->cs + i;
+ const struct mbus_dram_window *cs = dram->cs + i;
if ((cs->base & 0xffff0000) < (dma & 0xffff0000)) {
writel(cs->base & 0xffff0000,
base + KIRKWOOD_AUDIO_WIN_BASE_REG(win));
@@ -127,6 +128,7 @@ static int kirkwood_dma_open(struct snd_pcm_substream *substream)
struct snd_soc_dai *cpu_dai = soc_runtime->cpu_dai;
struct kirkwood_dma_data *priv;
struct kirkwood_dma_priv *prdata = snd_soc_platform_get_drvdata(platform);
+ const struct mbus_dram_target_info *dram;
unsigned long addr;
priv = snd_soc_dai_get_dma_data(cpu_dai, substream);
@@ -175,15 +177,16 @@ static int kirkwood_dma_open(struct snd_pcm_substream *substream)
writel((unsigned long)-1, priv->io + KIRKWOOD_ERR_MASK);
}
+ dram = mv_mbus_dram_info();
addr = virt_to_phys(substream->dma_buffer.area);
if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
prdata->play_stream = substream;
kirkwood_dma_conf_mbus_windows(priv->io,
- KIRKWOOD_PLAYBACK_WIN, addr, priv->dram);
+ KIRKWOOD_PLAYBACK_WIN, addr, dram);
} else {
prdata->rec_stream = substream;
kirkwood_dma_conf_mbus_windows(priv->io,
- KIRKWOOD_RECORD_WIN, addr, priv->dram);
+ KIRKWOOD_RECORD_WIN, addr, dram);
}
return 0;