diff options
| author | Bruce Allan <bruce.w.allan@intel.com> | 2011-02-25 06:25:18 +0000 |
|---|---|---|
| committer | Jeff Kirsher <jeffrey.t.kirsher@intel.com> | 2011-03-11 02:14:56 -0800 |
| commit | 6cc7aaed70c96c3933fbacbad582fc79b7d6e335 (patch) | |
| tree | b01610d2eb974637e20d96364bb6bc513f0a3da4 | |
| parent | 1effb45cca29e22e4b2209bb567770b7e20a3a2b (diff) | |
e1000e: do not toggle LANPHYPC value bit when PHY reset is blocked
When PHY reset is intentionally blocked on 82577/8/9, do not toggle the
LANPHYPC value bit (essentially performing a hard power reset of the
device) otherwise the PHY can be put into an unknown state.
Cleanup whitespace in the same function.
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
| -rw-r--r-- | drivers/net/e1000e/ich8lan.c | 8 |
1 files changed, 4 insertions, 4 deletions
diff --git a/drivers/net/e1000e/ich8lan.c b/drivers/net/e1000e/ich8lan.c index cf18d65417e..9b434c0cbc9 100644 --- a/drivers/net/e1000e/ich8lan.c +++ b/drivers/net/e1000e/ich8lan.c @@ -307,9 +307,9 @@ static s32 e1000_init_phy_params_pchlan(struct e1000_hw *hw) * the interconnect to PCIe mode. */ fwsm = er32(FWSM); - if (!(fwsm & E1000_ICH_FWSM_FW_VALID)) { + if (!(fwsm & E1000_ICH_FWSM_FW_VALID) && !e1000_check_reset_block(hw)) { ctrl = er32(CTRL); - ctrl |= E1000_CTRL_LANPHYPC_OVERRIDE; + ctrl |= E1000_CTRL_LANPHYPC_OVERRIDE; ctrl &= ~E1000_CTRL_LANPHYPC_VALUE; ew32(CTRL, ctrl); udelay(10); @@ -336,7 +336,7 @@ static s32 e1000_init_phy_params_pchlan(struct e1000_hw *hw) goto out; /* Ungate automatic PHY configuration on non-managed 82579 */ - if ((hw->mac.type == e1000_pch2lan) && + if ((hw->mac.type == e1000_pch2lan) && !(fwsm & E1000_ICH_FWSM_FW_VALID)) { msleep(10); e1000_gate_hw_phy_config_ich8lan(hw, false); @@ -371,7 +371,7 @@ static s32 e1000_init_phy_params_pchlan(struct e1000_hw *hw) case e1000_phy_82579: phy->ops.check_polarity = e1000_check_polarity_82577; phy->ops.force_speed_duplex = - e1000_phy_force_speed_duplex_82577; + e1000_phy_force_speed_duplex_82577; phy->ops.get_cable_length = e1000_get_cable_length_82577; phy->ops.get_info = e1000_get_phy_info_82577; phy->ops.commit = e1000e_phy_sw_reset; |