diff options
author | Jonathan Cameron <jic23@kernel.org> | 2012-04-25 15:55:00 +0100 |
---|---|---|
committer | Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 2012-04-25 11:12:23 -0700 |
commit | 8af2c75a328355c23d68d3f8651ad52af3c7979d (patch) | |
tree | 6e4a516128262ac43b19d4ae5a9c88afb2648b68 /Documentation/ABI/testing/sysfs-bus-iio | |
parent | a980e046098b0a40eaff5e4e7fcde6cf035b7c06 (diff) |
IIO: Move the core abi documentation from staging
This file contains only the most generic elements. Other
class specific and device specific ABI documents will follow
over time.
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Diffstat (limited to 'Documentation/ABI/testing/sysfs-bus-iio')
-rw-r--r-- | Documentation/ABI/testing/sysfs-bus-iio | 730 |
1 files changed, 730 insertions, 0 deletions
diff --git a/Documentation/ABI/testing/sysfs-bus-iio b/Documentation/ABI/testing/sysfs-bus-iio new file mode 100644 index 00000000000..2ce4dadaf3f --- /dev/null +++ b/Documentation/ABI/testing/sysfs-bus-iio @@ -0,0 +1,730 @@ +What: /sys/bus/iio/devices/iio:deviceX +KernelVersion: 2.6.35 +Contact: linux-iio@vger.kernel.org +Description: + Hardware chip or device accessed by one communication port. + Corresponds to a grouping of sensor channels. X is the IIO + index of the device. + +What: /sys/bus/iio/devices/triggerX +KernelVersion: 2.6.35 +Contact: linux-iio@vger.kernel.org +Description: + An event driven driver of data capture to an in kernel buffer. + May be provided by a device driver that also has an IIO device + based on hardware generated events (e.g. data ready) or + provided by a separate driver for other hardware (e.g. + periodic timer, GPIO or high resolution timer). + Contains trigger type specific elements. These do not + generalize well and hence are not documented in this file. + X is the IIO index of the trigger. + +What: /sys/bus/iio/devices/iio:deviceX/buffer +KernelVersion: 2.6.35 +Contact: linux-iio@vger.kernel.org +Description: + Directory of attributes relating to the buffer for the device. + +What: /sys/bus/iio/devices/iio:deviceX/name +KernelVersion: 2.6.35 +Contact: linux-iio@vger.kernel.org +Description: + Description of the physical chip / device for device X. + Typically a part number. + +What: /sys/bus/iio/devices/iio:deviceX/sampling_frequency +What: /sys/bus/iio/devices/iio:deviceX/buffer/sampling_frequency +What: /sys/bus/iio/devices/triggerX/sampling_frequency +KernelVersion: 2.6.35 +Contact: linux-iio@vger.kernel.org +Description: + Some devices have internal clocks. This parameter sets the + resulting sampling frequency. In many devices this + parameter has an effect on input filters etc rather than + simply controlling when the input is sampled. As this + effects datardy triggers, hardware buffers and the sysfs + direct access interfaces, it may be found in any of the + relevant directories. If it effects all of the above + then it is to be found in the base device directory. + +What: /sys/bus/iio/devices/iio:deviceX/sampling_frequency_available +What: /sys/.../iio:deviceX/buffer/sampling_frequency_available +What: /sys/bus/iio/devices/triggerX/sampling_frequency_available +KernelVersion: 2.6.35 +Contact: linux-iio@vger.kernel.org +Description: + When the internal sampling clock can only take a small + discrete set of values, this file lists those available. + +What: /sys/bus/iio/devices/iio:deviceX/oversampling_ratio +KernelVersion: 2.6.38 +Contact: linux-iio@vger.kernel.org +Description: + Hardware dependent ADC oversampling. Controls the sampling ratio + of the digital filter if available. + +What: /sys/bus/iio/devices/iio:deviceX/oversampling_ratio_available +KernelVersion: 2.6.38 +Contact: linux-iio@vger.kernel.org +Description: + Hardware dependent values supported by the oversampling filter. + +What: /sys/bus/iio/devices/iio:deviceX/in_voltageY_raw +What: /sys/bus/iio/devices/iio:deviceX/in_voltageY_supply_raw +KernelVersion: 2.6.35 +Contact: linux-iio@vger.kernel.org +Description: + Raw (unscaled no bias removal etc) voltage measurement from + channel Y. In special cases where the channel does not + correspond to externally available input one of the named + versions may be used. The number must always be specified and + unique to allow association with event codes. Units after + application of scale and offset are microvolts. + +What: /sys/bus/iio/devices/iio:deviceX/in_voltageY-voltageZ_raw +KernelVersion: 2.6.35 +Contact: linux-iio@vger.kernel.org +Description: + Raw (unscaled) differential voltage measurement equivalent to + channel Y - channel Z where these channel numbers apply to the + physically equivalent inputs when non differential readings are + separately available. In differential only parts, then all that + is required is a consistent labeling. Units after application + of scale and offset are microvolts. + +What: /sys/bus/iio/devices/iio:deviceX/in_capacitanceY_raw +KernelVersion: 3.2 +Contact: linux-iio@vger.kernel.org +Description: + Raw capacitance measurement from channel Y. Units after + application of scale and offset are nanofarads. + +What: /sys/.../iio:deviceX/in_capacitanceY-in_capacitanceZ_raw +KernelVersion: 3.2 +Contact: linux-iio@vger.kernel.org +Description: + Raw differential capacitance measurement equivalent to + channel Y - channel Z where these channel numbers apply to the + physically equivalent inputs when non differential readings are + separately available. In differential only parts, then all that + is required is a consistent labeling. Units after application + of scale and offset are nanofarads. + +What: /sys/bus/iio/devices/iio:deviceX/in_temp_raw +What: /sys/bus/iio/devices/iio:deviceX/in_tempX_raw +What: /sys/bus/iio/devices/iio:deviceX/in_temp_x_raw +What: /sys/bus/iio/devices/iio:deviceX/in_temp_y_raw +What: /sys/bus/iio/devices/iio:deviceX/in_temp_z_raw +KernelVersion: 2.6.35 +Contact: linux-iio@vger.kernel.org +Description: + Raw (unscaled no bias removal etc) temperature measurement. + If an axis is specified it generally means that the temperature + sensor is associated with one part of a compound device (e.g. + a gyroscope axis). Units after application of scale and offset + are milli degrees Celsuis. + +What: /sys/bus/iio/devices/iio:deviceX/in_tempX_input +KernelVersion: 2.6.38 +Contact: linux-iio@vger.kernel.org +Description: + Scaled temperature measurement in milli degrees Celsius. + +What: /sys/bus/iio/devices/iio:deviceX/in_accel_x_raw +What: /sys/bus/iio/devices/iio:deviceX/in_accel_y_raw +What: /sys/bus/iio/devices/iio:deviceX/in_accel_z_raw +KernelVersion: 2.6.35 +Contact: linux-iio@vger.kernel.org +Description: + Acceleration in direction x, y or z (may be arbitrarily assigned + but should match other such assignments on device). + Has all of the equivalent parameters as per voltageY. Units + after application of scale and offset are m/s^2. + +What: /sys/bus/iio/devices/iio:deviceX/in_anglvel_x_raw +What: /sys/bus/iio/devices/iio:deviceX/in_anglvel_y_raw +What: /sys/bus/iio/devices/iio:deviceX/in_anglvel_z_raw +KernelVersion: 2.6.35 +Contact: linux-iio@vger.kernel.org +Description: + Angular velocity about axis x, y or z (may be arbitrarily + assigned) Data converted by application of offset then scale to + radians per second. Has all the equivalent parameters as + per voltageY. Units after application of scale and offset are + radians per second. + +What: /sys/bus/iio/devices/iio:deviceX/in_incli_x_raw +What: /sys/bus/iio/devices/iio:deviceX/in_incli_y_raw +What: /sys/bus/iio/devices/iio:deviceX/in_incli_z_raw +KernelVersion: 2.6.35 +Contact: linux-iio@vger.kernel.org +Description: + Inclination raw reading about axis x, y or z (may be + arbitrarily assigned). Data converted by application of offset + and scale to Degrees. + +What: /sys/bus/iio/devices/iio:deviceX/in_magn_x_raw +What: /sys/bus/iio/devices/iio:deviceX/in_magn_y_raw +What: /sys/bus/iio/devices/iio:deviceX/in_magn_z_raw +KernelVersion: 2.6.35 +Contact: linux-iio@vger.kernel.org +Description: + Magnetic field along axis x, y or z (may be arbitrarily + assigned). Data converted by application of offset + then scale to Gauss. + +What: /sys/bus/iio/devices/iio:deviceX/in_accel_x_peak_raw +What: /sys/bus/iio/devices/iio:deviceX/in_accel_y_peak_raw +What: /sys/bus/iio/devices/iio:deviceX/in_accel_z_peak_raw +KernelVersion: 2.6.36 +Contact: linux-iio@vger.kernel.org +Description: + Highest value since some reset condition. These + attributes allow access to this and are otherwise + the direct equivalent of the <type>Y[_name]_raw attributes. + +What: /sys/bus/iio/devices/iio:deviceX/in_accel_xyz_squared_peak_raw +KernelVersion: 2.6.36 +Contact: linux-iio@vger.kernel.org +Description: + A computed peak value based on the sum squared magnitude of + the underlying value in the specified directions. + +What: /sys/bus/iio/devices/iio:deviceX/in_accel_offset +What: /sys/bus/iio/devices/iio:deviceX/in_accel_x_offset +What: /sys/bus/iio/devices/iio:deviceX/in_accel_y_offset +What: /sys/bus/iio/devices/iio:deviceX/in_accel_z_offset +What: /sys/bus/iio/devices/iio:deviceX/in_voltageY_offset +What: /sys/bus/iio/devices/iio:deviceX/in_voltage_offset +What: /sys/bus/iio/devices/iio:deviceX/in_tempY_offset +What: /sys/bus/iio/devices/iio:deviceX/in_temp_offset +KernelVersion: 2.6.35 +Contact: linux-iio@vger.kernel.org +Description: + If known for a device, offset to be added to <type>[Y]_raw prior + to scaling by <type>[Y]_scale in order to obtain value in the + <type> units as specified in <type>[y]_raw documentation. + Not present if the offset is always 0 or unknown. If Y or + axis <x|y|z> is not present, then the offset applies to all + in channels of <type>. + May be writable if a variable offset can be applied on the + device. Note that this is different to calibbias which + is for devices (or drivers) that apply offsets to compensate + for variation between different instances of the part, typically + adjusted by using some hardware supported calibration procedure. + Calibbias is applied internally, offset is applied in userspace + to the _raw output. + +What: /sys/bus/iio/devices/iio:deviceX/in_voltageY_scale +What: /sys/bus/iio/devices/iio:deviceX/in_voltageY_supply_scale +What: /sys/bus/iio/devices/iio:deviceX/in_voltage_scale +What: /sys/bus/iio/devices/iio:deviceX/out_voltageY_scale +What: /sys/bus/iio/devices/iio:deviceX/in_accel_scale +What: /sys/bus/iio/devices/iio:deviceX/in_accel_peak_scale +What: /sys/bus/iio/devices/iio:deviceX/in_anglvel_scale +What: /sys/bus/iio/devices/iio:deviceX/in_magn_scale +What: /sys/bus/iio/devices/iio:deviceX/in_magn_x_scale +What: /sys/bus/iio/devices/iio:deviceX/in_magn_y_scale +What: /sys/bus/iio/devices/iio:deviceX/in_magn_z_scale +KernelVersion: 2.6.35 +Contact: linux-iio@vger.kernel.org +Description: + If known for a device, scale to be applied to <type>Y[_name]_raw + post addition of <type>[Y][_name]_offset in order to obtain the + measured value in <type> units as specified in + <type>[Y][_name]_raw documentation. If shared across all in + channels then Y and <x|y|z> are not present and the value is + called <type>[Y][_name]_scale. The peak modifier means this + value is applied to <type>Y[_name]_peak_raw values. + +What: /sys/bus/iio/devices/iio:deviceX/in_accel_x_calibbias +What: /sys/bus/iio/devices/iio:deviceX/in_accel_y_calibbias +What: /sys/bus/iio/devices/iio:deviceX/in_accel_z_calibbias +What: /sys/bus/iio/devices/iio:deviceX/in_anglvel_x_calibbias +What: /sys/bus/iio/devices/iio:deviceX/in_anglvel_y_calibbias +What: /sys/bus/iio/devices/iio:deviceX/in_anglvel_z_calibbias +What: /sys/bus/iio/devices/iio:deviceX/in_illuminance0_calibbias +What: /sys/bus/iio/devices/iio:deviceX/in_proximity0_calibbias +KernelVersion: 2.6.35 +Contact: linux-iio@vger.kernel.org +Description: + Hardware applied calibration offset. (assumed to fix production + inaccuracies). + +What /sys/bus/iio/devices/iio:deviceX/in_voltageY_calibscale +What /sys/bus/iio/devices/iio:deviceX/in_voltageY_supply_calibscale +What /sys/bus/iio/devices/iio:deviceX/in_voltage_calibscale +What /sys/bus/iio/devices/iio:deviceX/in_accel_x_calibscale +What /sys/bus/iio/devices/iio:deviceX/in_accel_y_calibscale +What /sys/bus/iio/devices/iio:deviceX/in_accel_z_calibscale +What /sys/bus/iio/devices/iio:deviceX/in_anglvel_x_calibscale +What /sys/bus/iio/devices/iio:deviceX/in_anglvel_y_calibscale +What /sys/bus/iio/devices/iio:deviceX/in_anglvel_z_calibscale +what /sys/bus/iio/devices/iio:deviceX/in_illuminance0_calibscale +what /sys/bus/iio/devices/iio:deviceX/in_proximity0_calibscale +KernelVersion: 2.6.35 +Contact: linux-iio@vger.kernel.org +Description: + Hardware applied calibration scale factor. (assumed to fix + production inaccuracies). If shared across all channels, + <type>_calibscale is used. + +What: /sys/bus/iio/devices/iio:deviceX/in_accel_scale_available +What: /sys/.../iio:deviceX/in_voltageX_scale_available +What: /sys/.../iio:deviceX/in_voltage-voltage_scale_available +What: /sys/.../iio:deviceX/out_voltageX_scale_available +What: /sys/.../iio:deviceX/in_capacitance_scale_available +KernelVersion: 2.635 +Contact: linux-iio@vger.kernel.org +Description: + If a discrete set of scale values are available, they + are listed in this attribute. + +What: /sys/.../in_accel_filter_low_pass_3db_frequency +What: /sys/.../in_magn_filter_low_pass_3db_frequency +What: /sys/.../in_anglvel_filter_low_pass_3db_frequency +KernelVersion: 3.2 +Contact: linux-iio@vger.kernel.org +Description: + If a known or controllable low pass filter is applied + to the underlying data channel, then this parameter + gives the 3dB frequency of the filter in Hz. + +What: /sys/bus/iio/devices/iio:deviceX/out_voltageY_raw +KernelVersion: 2.6.37 +Contact: linux-iio@vger.kernel.org +Description: + Raw (unscaled, no bias etc.) output voltage for + channel Y. The number must always be specified and + unique if the output corresponds to a single channel. + +What: /sys/bus/iio/devices/iio:deviceX/out_voltageY&Z_raw +KernelVersion: 2.6.37 +Contact: linux-iio@vger.kernel.org +Description: + Raw (unscaled, no bias etc.) output voltage for an aggregate of + channel Y, channel Z, etc. This interface is available in cases + where a single output sets the value for multiple channels + simultaneously. + +What: /sys/bus/iio/devices/iio:deviceX/out_voltageY_powerdown_mode +What: /sys/bus/iio/devices/iio:deviceX/out_voltage_powerdown_mode +KernelVersion: 2.6.38 +Contact: linux-iio@vger.kernel.org +Description: + Specifies the output powerdown mode. + DAC output stage is disconnected from the amplifier and + 1kohm_to_gnd: connected to ground via an 1kOhm resistor + 100kohm_to_gnd: connected to ground via an 100kOhm resistor + three_state: left floating + For a list of available output power down options read + outX_powerdown_mode_available. If Y is not present the + mode is shared across all outputs. + +What: /sys/.../iio:deviceX/out_votlageY_powerdown_mode_available +What: /sys/.../iio:deviceX/out_voltage_powerdown_mode_available +KernelVersion: 2.6.38 +Contact: linux-iio@vger.kernel.org +Description: + Lists all available output power down modes. + If Y is not present the mode is shared across all outputs. + +What: /sys/bus/iio/devices/iio:deviceX/out_voltageY_powerdown +What: /sys/bus/iio/devices/iio:deviceX/out_voltage_powerdown +KernelVersion: 2.6.38 +Contact: linux-iio@vger.kernel.org +Description: + Writing 1 causes output Y to enter the power down mode specified + by the corresponding outY_powerdown_mode. Clearing returns to + normal operation. Y may be suppressed if all outputs are + controlled together. + +What: /sys/bus/iio/devices/iio:deviceX/events +KernelVersion: 2.6.35 +Contact: linux-iio@vger.kernel.org +Description: + Configuration of which hardware generated events are passed up + to user-space. + +What: /sys/.../iio:deviceX/events/in_accel_x_thresh_rising_en +What: /sys/.../iio:deviceX/events/in_accel_x_thresh_falling_en +What: /sys/.../iio:deviceX/events/in_accel_y_thresh_rising_en +What: /sys/.../iio:deviceX/events/in_accel_y_thresh_falling_en +What: /sys/.../iio:deviceX/events/in_accel_z_thresh_rising_en +What: /sys/.../iio:deviceX/events/in_accel_z_thresh_falling_en +What: /sys/.../iio:deviceX/events/in_anglvel_x_thresh_rising_en +What: /sys/.../iio:deviceX/events/in_anglvel_x_thresh_falling_en +What: /sys/.../iio:deviceX/events/in_anglvel_y_thresh_rising_en +What: /sys/.../iio:deviceX/events/in_anglvel_y_thresh_falling_en +What: /sys/.../iio:deviceX/events/in_anglvel_z_thresh_rising_en +What: /sys/.../iio:deviceX/events/in_anglvel_z_thresh_falling_en +What: /sys/.../iio:deviceX/events/in_magn_x_thresh_rising_en +What: /sys/.../iio:deviceX/events/in_magn_x_thresh_falling_en +What: /sys/.../iio:deviceX/events/in_magn_y_thresh_rising_en +What: /sys/.../iio:deviceX/events/in_magn_y_thresh_falling_en +What: /sys/.../iio:deviceX/events/in_magn_z_thresh_rising_en +What: /sys/.../iio:deviceX/events/in_magn_z_thresh_falling_en +What: /sys/.../iio:deviceX/events/in_voltageY_supply_thresh_rising_en +What: /sys/.../iio:deviceX/events/in_voltageY_supply_thresh_falling_en +What: /sys/.../iio:deviceX/events/in_voltageY_thresh_rising_en +What: /sys/.../iio:deviceX/events/in_voltageY_thresh_falling_en +What: /sys/.../iio:deviceX/events/in_tempY_thresh_rising_en +What: /sys/.../iio:deviceX/events/in_tempY_thresh_falling_en +KernelVersion: 2.6.37 +Contact: linux-iio@vger.kernel.org +Description: + Event generated when channel passes a threshold in the specified + (_rising|_falling) direction. If the direction is not specified, + then either the device will report an event which ever direction + a single threshold value is passed in (e.g. + <type>[Y][_name]_<raw|input>_thresh_value) or + <type>[Y][_name]_<raw|input>_thresh_rising_value and + <type>[Y][_name]_<raw|input>_thresh_falling_value may take + different values, but the device can only enable both thresholds + or neither. + Note the driver will assume the last p events requested are + to be enabled where p is however many it supports (which may + vary depending on the exact set requested. So if you want to be + sure you have set what you think you have, check the contents of + these attributes after everything is configured. Drivers may + have to buffer any parameters so that they are consistent when + a given event type is enabled a future point (and not those for + whatever event was previously enabled). + +What: /sys/.../iio:deviceX/events/in_accel_x_roc_rising_en +What: /sys/.../iio:deviceX/events/in_accel_x_roc_falling_en +What: /sys/.../iio:deviceX/events/in_accel_y_roc_rising_en +What: /sys/.../iio:deviceX/events/in_accel_y_roc_falling_en +What: /sys/.../iio:deviceX/events/in_accel_z_roc_rising_en +What: /sys/.../iio:deviceX/events/in_accel_z_roc_falling_en +What: /sys/.../iio:deviceX/events/in_anglvel_x_roc_rising_en +What: /sys/.../iio:deviceX/events/in_anglvel_x_roc_falling_en +What: /sys/.../iio:deviceX/events/in_anglvel_y_roc_rising_en +What: /sys/.../iio:deviceX/events/in_anglvel_y_roc_falling_en +What: /sys/.../iio:deviceX/events/in_anglvel_z_roc_rising_en +What: /sys/.../iio:deviceX/events/in_anglvel_z_roc_falling_en +What: /sys/.../iio:deviceX/events/in_magn_x_roc_rising_en +What: /sys/.../iio:deviceX/events/in_magn_x_roc_falling_en +What: /sys/.../iio:deviceX/events/in_magn_y_roc_rising_en +What: /sys/.../iio:deviceX/events/in_magn_y_roc_falling_en +What: /sys/.../iio:deviceX/events/in_magn_z_roc_rising_en +What: /sys/.../iio:deviceX/events/in_magn_z_roc_falling_en +What: /sys/.../iio:deviceX/events/in_voltageY_supply_roc_rising_en +What: /sys/.../iio:deviceX/events/in_voltageY_supply_roc_falling_en +What: /sys/.../iio:deviceX/events/in_voltageY_roc_rising_en +What: /sys/.../iio:deviceX/events/in_voltageY_roc_falling_en +What: /sys/.../iio:deviceX/events/in_tempY_roc_rising_en +What: /sys/.../iio:deviceX/events/in_tempY_roc_falling_en +KernelVersion: 2.6.37 +Contact: linux-iio@vger.kernel.org +Description: + Event generated when channel passes a threshold on the rate of + change (1st differential) in the specified (_rising|_falling) + direction. If the direction is not specified, then either the + device will report an event which ever direction a single + threshold value is passed in (e.g. + <type>[Y][_name]_<raw|input>_roc_value) or + <type>[Y][_name]_<raw|input>_roc_rising_value and + <type>[Y][_name]_<raw|input>_roc_falling_value may take + different values, but the device can only enable both rate of + change thresholds or neither. + Note the driver will assume the last p events requested are + to be enabled where p is however many it supports (which may + vary depending on the exact set requested. So if you want to be + sure you have set what you think you have, check the contents of + these attributes after everything is configured. Drivers may + have to buffer any parameters so that they are consistent when + a given event type is enabled a future point (and not those for + whatever event was previously enabled). + +What: /sys/.../events/in_accel_x_raw_thresh_rising_value +What: /sys/.../events/in_accel_x_raw_thresh_falling_value +What: /sys/.../events/in_accel_y_raw_thresh_rising_value +What: /sys/.../events/in_accel_y_raw_thresh_falling_value +What: /sys/.../events/in_accel_z_raw_thresh_rising_value +What: /sys/.../events/in_accel_z_raw_thresh_falling_value +What: /sys/.../events/in_anglvel_x_raw_thresh_rising_value +What: /sys/.../events/in_anglvel_x_raw_thresh_falling_value +What: /sys/.../events/in_anglvel_y_raw_thresh_rising_value +What: /sys/.../events/in_anglvel_y_raw_thresh_falling_value +What: /sys/.../events/in_anglvel_z_raw_thresh_rising_value +What: /sys/.../events/in_anglvel_z_raw_thresh_falling_value +What: /sys/.../events/in_magn_x_raw_thresh_rising_value +What: /sys/.../events/in_magn_x_raw_thresh_falling_value +What: /sys/.../events/in_magn_y_raw_thresh_rising_value +What: /sys/.../events/in_magn_y_raw_thresh_falling_value +What: /sys/.../events/in_magn_z_raw_thresh_rising_value +What: /sys/.../events/in_magn_z_raw_thresh_falling_value +What: /sys/.../events/in_voltageY_supply_raw_thresh_rising_value +What: /sys/.../events/in_voltageY_supply_raw_thresh_falling_value +What: /sys/.../events/in_voltageY_raw_thresh_rising_value +What: /sys/.../events/in_voltageY_raw_thresh_falling_value +What: /sys/.../events/in_tempY_raw_thresh_rising_value +What: /sys/.../events/in_tempY_raw_thresh_falling_value +What: /sys/.../events/in_illuminance0_thresh_falling_value +what: /sys/.../events/in_illuminance0_thresh_rising_value +what: /sys/.../events/in_proximity0_thresh_falling_value +what: /sys/.../events/in_proximity0_thresh_rising_value +KernelVersion: 2.6.37 +Contact: linux-iio@vger.kernel.org +Description: + Specifies the value of threshold that the device is comparing + against for the events enabled by + <type>Y[_name]_thresh[_rising|falling]_en. + If separate attributes exist for the two directions, but + direction is not specified for this attribute, then a single + threshold value applies to both directions. + The raw or input element of the name indicates whether the + value is in raw device units or in processed units (as _raw + and _input do on sysfs direct channel read attributes). + +What: /sys/.../events/in_accel_x_raw_roc_rising_value +What: /sys/.../events/in_accel_x_raw_roc_falling_value +What: /sys/.../events/in_accel_y_raw_roc_rising_value +What: /sys/.../events/in_accel_y_raw_roc_falling_value +What: /sys/.../events/in_accel_z_raw_roc_rising_value +What: /sys/.../events/in_accel_z_raw_roc_falling_value +What: /sys/.../events/in_anglvel_x_raw_roc_rising_value +What: /sys/.../events/in_anglvel_x_raw_roc_falling_value +What: /sys/.../events/in_anglvel_y_raw_roc_rising_value +What: /sys/.../events/in_anglvel_y_raw_roc_falling_value +What: /sys/.../events/in_anglvel_z_raw_roc_rising_value +What: /sys/.../events/in_anglvel_z_raw_roc_falling_value +What: /sys/.../events/in_magn_x_raw_roc_rising_value +What: /sys/.../events/in_magn_x_raw_roc_falling_value +What: /sys/.../events/in_magn_y_raw_roc_rising_value +What: /sys/.../events/in_magn_y_raw_roc_falling_value +What: /sys/.../events/in_magn_z_raw_roc_rising_value +What: /sys/.../events/in_magn_z_raw_roc_falling_value +What: /sys/.../events/in_voltageY_supply_raw_roc_rising_value +What: /sys/.../events/in_voltageY_supply_raw_roc_falling_value +What: /sys/.../events/in_voltageY_raw_roc_rising_value +What: /sys/.../events/in_voltageY_raw_roc_falling_value +What: /sys/.../events/in_tempY_raw_roc_rising_value +What: /sys/.../events/in_tempY_raw_roc_falling_value +KernelVersion: 2.6.37 +Contact: linux-iio@vger.kernel.org +Description: + Specifies the value of rate of change threshold that the + device is comparing against for the events enabled by + <type>[Y][_name]_roc[_rising|falling]_en. + If separate attributes exist for the two directions, + but direction is not specified for this attribute, + then a single threshold value applies to both directions. + The raw or input element of the name indicates whether the + value is in raw device units or in processed units (as _raw + and _input do on sysfs direct channel read attributes). + +What: /sys/.../events/in_accel_x_thresh_rising_period +What: /sys/.../events/in_accel_x_thresh_falling_period +hat: /sys/.../events/in_accel_x_roc_rising_period +What: /sys/.../events/in_accel_x_roc_falling_period +What: /sys/.../events/in_accel_y_thresh_rising_period +What: /sys/.../events/in_accel_y_thresh_falling_period +What: /sys/.../events/in_accel_y_roc_rising_period +What: /sys/.../events/in_accel_y_roc_falling_period +What: /sys/.../events/in_accel_z_thresh_rising_period +What: /sys/.../events/in_accel_z_thresh_falling_period +What: /sys/.../events/in_accel_z_roc_rising_period +What: /sys/.../events/in_accel_z_roc_falling_period +What: /sys/.../events/in_anglvel_x_thresh_rising_period +What: /sys/.../events/in_anglvel_x_thresh_falling_period +What: /sys/.../events/in_anglvel_x_roc_rising_period +What: /sys/.../events/in_anglvel_x_roc_falling_period +What: /sys/.../events/in_anglvel_y_thresh_rising_period +What: /sys/.../events/in_anglvel_y_thresh_falling_period +What: /sys/.../events/in_anglvel_y_roc_rising_period +What: /sys/.../events/in_anglvel_y_roc_falling_period +What: /sys/.../events/in_anglvel_z_thresh_rising_period +What: /sys/.../events/in_anglvel_z_thresh_falling_period +What: /sys/.../events/in_anglvel_z_roc_rising_period +What: /sys/.../events/in_anglvel_z_roc_falling_period +What: /sys/.../events/in_magn_x_thresh_rising_period +What: /sys/.../events/in_magn_x_thresh_falling_period +What: /sys/.../events/in_magn_x_roc_rising_period +What: /sys/.../events/in_magn_x_roc_falling_period +What: /sys/.../events/in_magn_y_thresh_rising_period +What: /sys/.../events/in_magn_y_thresh_falling_period +What: /sys/.../events/in_magn_y_roc_rising_period +What: /sys/.../events/in_magn_y_roc_falling_period +What: /sys/.../events/in_magn_z_thresh_rising_period +What: /sys/.../events/in_magn_z_thresh_falling_period +What: /sys/.../events/in_magn_z_roc_rising_period +What: /sys/.../events/in_magn_z_roc_falling_period +What: /sys/.../events/in_voltageY_supply_thresh_rising_period +What: /sys/.../events/in_voltageY_supply_thresh_falling_period +What: /sys/.../events/in_voltageY_supply_roc_rising_period +What: /sys/.../events/in_voltageY_supply_roc_falling_period +What: /sys/.../events/in_voltageY_thresh_rising_period +What: /sys/.../events/in_voltageY_thresh_falling_period +What: /sys/.../events/in_voltageY_roc_rising_period +What: /sys/.../events/in_voltageY_roc_falling_period +What: /sys/.../events/in_tempY_thresh_rising_period +What: /sys/.../events/in_tempY_thresh_falling_period +What: /sys/.../events/in_tempY_roc_rising_period +What: /sys/.../events/in_tempY_roc_falling_period +What: /sys/.../events/in_accel_x&y&z_mag_falling_period +What: /sys/.../events/in_intensity0_thresh_period +What: /sys/.../events/in_proximity0_thresh_period +KernelVersion: 2.6.37 +Contact: linux-iio@vger.kernel.org +Description: + Period of time (in seconds) for which the condition must be + met before an event is generated. If direction is not + specified then this period applies to both directions. + +What: /sys/.../iio:deviceX/events/in_accel_mag_en +What: /sys/.../iio:deviceX/events/in_accel_mag_rising_en +What: /sys/.../iio:deviceX/events/in_accel_mag_falling_en +What: /sys/.../iio:deviceX/events/in_accel_x_mag_en +What: /sys/.../iio:deviceX/events/in_accel_x_mag_rising_en +What: /sys/.../iio:deviceX/events/in_accel_x_mag_falling_en +What: /sys/.../iio:deviceX/events/in_accel_y_mag_en +What: /sys/.../iio:deviceX/events/in_accel_y_mag_rising_en +What: /sys/.../iio:deviceX/events/in_accel_y_mag_falling_en +What: /sys/.../iio:deviceX/events/in_accel_z_mag_en +What: /sys/.../iio:deviceX/events/in_accel_z_mag_rising_en +What: /sys/.../iio:deviceX/events/in_accel_z_mag_falling_en +What: /sys/.../iio:deviceX/events/in_accel_x&y&z_mag_rising_en +What: /sys/.../iio:deviceX/events/in_accel_x&y&z_mag_falling_en +KernelVersion: 2.6.37 +Contact: linux-iio@vger.kernel.org +Description: + Similar to in_accel_x_thresh[_rising|_falling]_en, but here the + magnitude of the channel is compared to the threshold, not its + signed value. + +What: /sys/.../events/in_accel_raw_mag_value +What: /sys/.../events/in_accel_x_raw_mag_rising_value +What: /sys/.../events/in_accel_y_raw_mag_rising_value +What: /sys/.../events/in_accel_z_raw_mag_rising_value +KernelVersion: 2.6.37 +Contact: linux-iio@vger.kernel.org +Description: + The value to which the magnitude of the channel is compared. If + number or direction is not specified, applies to all channels of + this type. + +What: /sys/bus/iio/devices/iio:deviceX/trigger/current_trigger +KernelVersion: 2.6.35 +Contact: linux-iio@vger.kernel.org +Description: + The name of the trigger source being used, as per string given + in /sys/class/iio/triggerY/name. + +What: /sys/bus/iio/devices/iio:deviceX/buffer/length +KernelVersion: 2.6.35 +Contact: linux-iio@vger.kernel.org +Description: + Number of scans contained by the buffer. + +What: /sys/bus/iio/devices/iio:deviceX/buffer/bytes_per_datum +KernelVersion: 2.6.37 +Contact: linux-iio@vger.kernel.org +Description: + Bytes per scan. Due to alignment fun, the scan may be larger + than implied directly by the scan_element parameters. + +What: /sys/bus/iio/devices/iio:deviceX/buffer/enable +KernelVersion: 2.6.35 +Contact: linux-iio@vger.kernel.org +Description: + Actually start the buffer capture up. Will start trigger + if first device and appropriate. + +What: /sys/bus/iio/devices/iio:deviceX/buffer/scan_elements +KernelVersion: 2.6.37 +Contact: linux-iio@vger.kernel.org +Description: + Directory containing interfaces for elements that will be + captured for a single triggered sample set in the buffer. + +What: /sys/.../buffer/scan_elements/in_accel_x_en +What: /sys/.../buffer/scan_elements/in_accel_y_en +What: /sys/.../buffer/scan_elements/in_accel_z_en +What: /sys/.../buffer/scan_elements/in_anglvel_x_en +What: /sys/.../buffer/scan_elements/in_anglvel_y_en +What: /sys/.../buffer/scan_elements/in_anglvel_z_en +What: /sys/.../buffer/scan_elements/in_magn_x_en +What: /sys/.../buffer/scan_elements/in_magn_y_en +What: /sys/.../buffer/scan_elements/in_magn_z_en +What: /sys/.../buffer/scan_elements/in_timestamp_en +What: /sys/.../buffer/scan_elements/in_voltageY_supply_en +What: /sys/.../buffer/scan_elements/in_voltageY_en +What: /sys/.../buffer/scan_elements/in_voltageY-voltageZ_en +What: /sys/.../buffer/scan_elements/in_incli_x_en +What: /sys/.../buffer/scan_elements/in_incli_y_en +KernelVersion: 2.6.37 +Contact: linux-iio@vger.kernel.org +Description: + Scan element control for triggered data capture. + +What: /sys/.../buffer/scan_elements/in_accel_type +What: /sys/.../buffer/scan_elements/in_anglvel_type +What: /sys/.../buffer/scan_elements/in_magn_type +What: /sys/.../buffer/scan_elements/in_incli_type +What: /sys/.../buffer/scan_elements/in_voltageY_type +What: /sys/.../buffer/scan_elements/in_voltage-in_type +What: /sys/.../buffer/scan_elements/in_voltageY_supply_type +What: /sys/.../buffer/scan_elements/in_timestamp_type +KernelVersion: 2.6.37 +Contact: linux-iio@vger.kernel.org +Description: + Description of the scan element data storage within the buffer + and hence the form in which it is read from user-space. + Form is [be|le]:[s|u]bits/storagebits[>>shift]. + be or le specifies big or little endian. s or u specifies if + signed (2's complement) or unsigned. bits is the number of bits + of data and storagebits is the space (after padding) that it + occupies in the buffer. shift if specified, is the shift that + needs to be applied prior to masking out unused bits. Some + devices put their data in the middle of the transferred elements + with additional information on both sides. Note that some + devices will have additional information in the unused bits + so to get a clean value, the bits value must be used to mask + the buffer output value appropriately. The storagebits value + also specifies the data alignment. So s48/64>>2 will be a + signed 48 bit integer stored in a 64 bit location aligned to + a a64 bit boundary. To obtain the clean value, shift right 2 + and apply a mask to zero the top 16 bits of the result. + For other storage combinations this attribute will be extended + appropriately. + +What: /sys/.../buffer/scan_elements/in_accel_type_available +KernelVersion: 2.6.37 +Contact: linux-iio@vger.kernel.org +Description: + If the type parameter can take one of a small set of values, + this attribute lists them. + +What: /sys/.../buffer/scan_elements/in_voltageY_index +What: /sys/.../buffer/scan_elements/in_voltageY_supply_index +What: /sys/.../buffer/scan_elements/in_accel_x_index +What: /sys/.../buffer/scan_elements/in_accel_y_index +What: /sys/.../buffer/scan_elements/in_accel_z_index +What: /sys/.../buffer/scan_elements/in_anglvel_x_index +What: /sys/.../buffer/scan_elements/in_anglvel_y_index +What: /sys/.../buffer/scan_elements/in_anglvel_z_index +What: /sys/.../buffer/scan_elements/in_magn_x_index +What: /sys/.../buffer/scan_elements/in_magn_y_index +What: /sys/.../buffer/scan_elements/in_magn_z_index +What: /sys/.../buffer/scan_elements/in_incli_x_index +What: /sys/.../buffer/scan_elements/in_incli_y_index +What: /sys/.../buffer/scan_elements/in_timestamp_index +KernelVersion: 2.6.37 +Contact: linux-iio@vger.kernel.org +Description: + A single positive integer specifying the position of this + scan element in the buffer. Note these are not dependent on + what is enabled and may not be contiguous. Thus for user-space + to establish the full layout these must be used in conjunction + with all _en attributes to establish which channels are present, + and the relevant _type attributes to establish the data storage + format. + +What: /sys/.../iio:deviceX/in_anglvel_z_quadrature_correction_raw +KernelVersion: 2.6.38 +Contact: linux-iio@vger.kernel.org +Description: + This attribute is used to read the amount of quadrature error + present in the device at a given time. |