Merge branches 'gemini' and 'misc' into devel

16 files changed, 399 insertions, 34 deletions

diff --git a/Documentation/ABI/obsolete/sysfs-bus-usb b/Documentation/ABI/obsolete/sysfs-bus-usb
new file mode 100644
index 00000000000..bd096d33fbc
--- /dev/null
+++ b/Documentation/ABI/obsolete/sysfs-bus-usb
@@ -0,0 +1,31 @@
+What:		/sys/bus/usb/devices/.../power/level
+Date:		March 2007
+KernelVersion:	2.6.21
+Contact:	Alan Stern <stern@rowland.harvard.edu>
+Description:
+		Each USB device directory will contain a file named
+		power/level.  This file holds a power-level setting for
+		the device, either "on" or "auto".
+
+		"on" means that the device is not allowed to autosuspend,
+		although normal suspends for system sleep will still
+		be honored.  "auto" means the device will autosuspend
+		and autoresume in the usual manner, according to the
+		capabilities of its driver.
+
+		During normal use, devices should be left in the "auto"
+		level.  The "on" level is meant for administrative uses.
+		If you want to suspend a device immediately but leave it
+		free to wake up in response to I/O requests, you should
+		write "0" to power/autosuspend.
+
+		Device not capable of proper suspend and resume should be
+		left in the "on" level.  Although the USB spec requires
+		devices to support suspend/resume, many of them do not.
+		In fact so many don't that by default, the USB core
+		initializes all non-hub devices in the "on" level.  Some
+		drivers may change this setting when they are bound.
+
+		This file is deprecated and will be removed after 2010.
+		Use the power/control file instead; it does exactly the
+		same thing.
diff --git a/Documentation/ABI/obsolete/sysfs-class-rfkill b/Documentation/ABI/obsolete/sysfs-class-rfkill
new file mode 100644
index 00000000000..4201d5b0551
--- /dev/null
+++ b/Documentation/ABI/obsolete/sysfs-class-rfkill
@@ -0,0 +1,29 @@
+rfkill - radio frequency (RF) connector kill switch support
+
+For details to this subsystem look at Documentation/rfkill.txt.
+
+What:		/sys/class/rfkill/rfkill[0-9]+/state
+Date:		09-Jul-2007
+KernelVersion	v2.6.22
+Contact:	linux-wireless@vger.kernel.org
+Description: 	Current state of the transmitter.
+		This file is deprecated and sheduled to be removed in 2014,
+		because its not possible to express the 'soft and hard block'
+		state of the rfkill driver.
+Values: 	A numeric value.
+		0: RFKILL_STATE_SOFT_BLOCKED
+			transmitter is turned off by software
+		1: RFKILL_STATE_UNBLOCKED
+			transmitter is (potentially) active
+		2: RFKILL_STATE_HARD_BLOCKED
+			transmitter is forced off by something outside of
+			the driver's control.
+
+What:		/sys/class/rfkill/rfkill[0-9]+/claim
+Date:		09-Jul-2007
+KernelVersion	v2.6.22
+Contact:	linux-wireless@vger.kernel.org
+Description:	This file is deprecated because there no longer is a way to
+		claim just control over a single rfkill instance.
+		This file is scheduled to be removed in 2012.
+Values: 	0: Kernel handles events
diff --git a/Documentation/ABI/stable/sysfs-class-rfkill b/Documentation/ABI/stable/sysfs-class-rfkill
new file mode 100644
index 00000000000..097f522c33b
--- /dev/null
+++ b/Documentation/ABI/stable/sysfs-class-rfkill
@@ -0,0 +1,67 @@
+rfkill - radio frequency (RF) connector kill switch support
+
+For details to this subsystem look at Documentation/rfkill.txt.
+
+For the deprecated /sys/class/rfkill/*/state and
+/sys/class/rfkill/*/claim knobs of this interface look in
+Documentation/ABI/obsolete/sysfs-class-rfkill.
+
+What: 		/sys/class/rfkill
+Date:		09-Jul-2007
+KernelVersion:	v2.6.22
+Contact:	linux-wireless@vger.kernel.org,
+Description: 	The rfkill class subsystem folder.
+		Each registered rfkill driver is represented by an rfkillX
+		subfolder (X being an integer > 0).
+
+
+What:		/sys/class/rfkill/rfkill[0-9]+/name
+Date:		09-Jul-2007
+KernelVersion	v2.6.22
+Contact:	linux-wireless@vger.kernel.org
+Description: 	Name assigned by driver to this key (interface or driver name).
+Values: 	arbitrary string.
+
+
+What: 		/sys/class/rfkill/rfkill[0-9]+/type
+Date:		09-Jul-2007
+KernelVersion	v2.6.22
+Contact:	linux-wireless@vger.kernel.org
+Description: 	Driver type string ("wlan", "bluetooth", etc).
+Values: 	See include/linux/rfkill.h.
+
+
+What:		/sys/class/rfkill/rfkill[0-9]+/persistent
+Date:		09-Jul-2007
+KernelVersion	v2.6.22
+Contact:	linux-wireless@vger.kernel.org
+Description: 	Whether the soft blocked state is initialised from non-volatile
+		storage at startup.
+Values: 	A numeric value.
+		0: false
+		1: true
+
+
+What:		/sys/class/rfkill/rfkill[0-9]+/hard
+Date:		12-March-2010
+KernelVersion	v2.6.34
+Contact:	linux-wireless@vger.kernel.org
+Description: 	Current hardblock state. This file is read only.
+Values: 	A numeric value.
+		0: inactive
+			The transmitter is (potentially) active.
+		1: active
+			The transmitter is forced off by something outside of
+			the driver's control.
+
+
+What:		/sys/class/rfkill/rfkill[0-9]+/soft
+Date:		12-March-2010
+KernelVersion	v2.6.34
+Contact:	linux-wireless@vger.kernel.org
+Description:	Current softblock state. This file is read and write.
+Values: 	A numeric value.
+		0: inactive
+			The transmitter is (potentially) active.
+		1: active
+			The transmitter is turned off by software.
diff --git a/Documentation/ABI/testing/debugfs-ec b/Documentation/ABI/testing/debugfs-ec
new file mode 100644
index 00000000000..6546115a94d
--- /dev/null
+++ b/Documentation/ABI/testing/debugfs-ec
@@ -0,0 +1,20 @@
+What:		/sys/kernel/debug/ec/*/{gpe,use_global_lock,io}
+Date:		July 2010
+Contact:	Thomas Renninger <trenn@suse.de>
+Description:
+
+General information like which GPE is assigned to the EC and whether
+the global lock should get used.
+Knowing the EC GPE one can watch the amount of HW events related to
+the EC here (XY -> GPE number from /sys/kernel/debug/ec/*/gpe):
+/sys/firmware/acpi/interrupts/gpeXY
+
+The io file is binary and a userspace tool located here:
+ftp://ftp.suse.com/pub/people/trenn/sources/ec/
+should get used to read out the 256 Embedded Controller registers
+or writing to them.
+
+CAUTION: Do not write to the Embedded Controller if you don't know
+what you are doing! Rebooting afterwards also is a good idea.
+This can influence the way your machine is cooled and fans may
+not get switched on again after you did a wrong write.
diff --git a/Documentation/ABI/testing/sysfs-bus-usb b/Documentation/ABI/testing/sysfs-bus-usb
index a986e9bbba3..294aa864a60 100644
--- a/Documentation/ABI/testing/sysfs-bus-usb
+++ b/Documentation/ABI/testing/sysfs-bus-usb
@@ -14,34 +14,6 @@ Description:
 		The autosuspend delay for newly-created devices is set to
 		the value of the usbcore.autosuspend module parameter.
 
-What:		/sys/bus/usb/devices/.../power/level
-Date:		March 2007
-KernelVersion:	2.6.21
-Contact:	Alan Stern <stern@rowland.harvard.edu>
-Description:
-		Each USB device directory will contain a file named
-		power/level.  This file holds a power-level setting for
-		the device, either "on" or "auto".
-
-		"on" means that the device is not allowed to autosuspend,
-		although normal suspends for system sleep will still
-		be honored.  "auto" means the device will autosuspend
-		and autoresume in the usual manner, according to the
-		capabilities of its driver.
-
-		During normal use, devices should be left in the "auto"
-		level.  The "on" level is meant for administrative uses.
-		If you want to suspend a device immediately but leave it
-		free to wake up in response to I/O requests, you should
-		write "0" to power/autosuspend.
-
-		Device not capable of proper suspend and resume should be
-		left in the "on" level.  Although the USB spec requires
-		devices to support suspend/resume, many of them do not.
-		In fact so many don't that by default, the USB core
-		initializes all non-hub devices in the "on" level.  Some
-		drivers may change this setting when they are bound.
-
 What:		/sys/bus/usb/devices/.../power/persist
 Date:		May 2007
 KernelVersion:	2.6.23
@@ -160,7 +132,7 @@ Description:
 		match the driver to the device.  For example:
 		# echo "046d c315" > /sys/bus/usb/drivers/foo/remove_id
 
-What:		/sys/bus/usb/device/.../avoid_reset
+What:		/sys/bus/usb/device/.../avoid_reset_quirk
 Date:		December 2009
 Contact:	Oliver Neukum <oliver@neukum.org>
 Description:
diff --git a/Documentation/ABI/testing/sysfs-class-power b/Documentation/ABI/testing/sysfs-class-power
new file mode 100644
index 00000000000..78c7baca358
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-class-power
@@ -0,0 +1,20 @@
+What:		/sys/class/power/ds2760-battery.*/charge_now
+Date:		May 2010
+KernelVersion:	2.6.35
+Contact:	Daniel Mack <daniel@caiaq.de>
+Description:
+		This file is writeable and can be used to set the current
+		coloumb counter value inside the battery monitor chip. This
+		is needed for unavoidable corrections of aging batteries.
+		A userspace daemon can monitor the battery charging logic
+		and once the counter drops out of considerable bounds, take
+		appropriate action.
+
+What:		/sys/class/power/ds2760-battery.*/charge_full
+Date:		May 2010
+KernelVersion:	2.6.35
+Contact:	Daniel Mack <daniel@caiaq.de>
+Description:
+		This file is writeable and can be used to set the assumed
+		battery 'full level'. As batteries age, this value has to be
+		amended over time.
diff --git a/Documentation/ABI/testing/sysfs-devices-memory b/Documentation/ABI/testing/sysfs-devices-memory
index bf1627b02a0..7405de26ee6 100644
--- a/Documentation/ABI/testing/sysfs-devices-memory
+++ b/Documentation/ABI/testing/sysfs-devices-memory
@@ -7,7 +7,7 @@ Description:
 		added or removed dynamically to represent hot-add/remove
 		operations.
 Users:		hotplug memory add/remove tools
-		https://w3.opensource.ibm.com/projects/powerpc-utils/
+		http://www.ibm.com/developerworks/wikis/display/LinuxP/powerpc-utils
 
 What:		/sys/devices/system/memory/memoryX/removable
 Date:		June 2008
@@ -19,7 +19,7 @@ Description:
 		identify removable sections of the memory before attempting
 		potentially expensive hot-remove memory operation
 Users:		hotplug memory remove tools
-		https://w3.opensource.ibm.com/projects/powerpc-utils/
+		http://www.ibm.com/developerworks/wikis/display/LinuxP/powerpc-utils	
 
 What:		/sys/devices/system/memory/memoryX/phys_device
 Date:		September 2008
@@ -43,7 +43,7 @@ Date:		September 2008
 Contact:	Badari Pulavarty <pbadari@us.ibm.com>
 Description:
 		The file /sys/devices/system/memory/memoryX/state
-		is read-write.  When read, it's contents show the
+		is read-write.  When read, its contents show the
 		online/offline state of the memory section.  When written,
 		root can toggle the the online/offline state of a removable
 		memory section (see removable file description above)
@@ -58,7 +58,7 @@ Description:
 		by root to offline that section.
 		# echo offline > /sys/devices/system/memory/memory22/state
 Users:		hotplug memory remove tools
-		https://w3.opensource.ibm.com/projects/powerpc-utils/
+		http://www.ibm.com/developerworks/wikis/display/LinuxP/powerpc-utils
 
 
 What:		/sys/devices/system/memoryX/nodeY
diff --git a/Documentation/ABI/testing/sysfs-devices-node b/Documentation/ABI/testing/sysfs-devices-node
new file mode 100644
index 00000000000..453a210c3ce
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-devices-node
@@ -0,0 +1,7 @@
+What:		/sys/devices/system/node/nodeX/compact
+Date:		February 2010
+Contact:	Mel Gorman <mel@csn.ul.ie>
+Description:
+		When this file is written to, all memory within that node
+		will be compacted. When it completes, memory will be freed
+		into blocks which have as many contiguous pages as possible
diff --git a/Documentation/ABI/testing/sysfs-devices-platform-_UDC_-gadget b/Documentation/ABI/testing/sysfs-devices-platform-_UDC_-gadget
new file mode 100644
index 00000000000..34034027b13
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-devices-platform-_UDC_-gadget
@@ -0,0 +1,9 @@
+What:		/sys/devices/platform/_UDC_/gadget/suspended
+Date:		April 2010
+Contact:	Fabien Chouteau <fabien.chouteau@barco.com>
+Description:
+		Show the suspend state of an USB composite gadget.
+		1 -> suspended
+		0 -> resumed
+
+		(_UDC_ is the name of the USB Device Controller driver)
diff --git a/Documentation/ABI/testing/sysfs-devices-system-cpu b/Documentation/ABI/testing/sysfs-devices-system-cpu
index 84a710f87c6..7564e88bfa4 100644
--- a/Documentation/ABI/testing/sysfs-devices-system-cpu
+++ b/Documentation/ABI/testing/sysfs-devices-system-cpu
@@ -197,7 +197,7 @@ Description:	These files exist in every cpu's cache index directories.
 		Currently, only AMD Family 10h Processors support cache index
 		disable, and only for their L3 caches.  See the BIOS and
 		Kernel Developer's Guide at
-		http://www.amd.com/us-en/assets/content_type/white_papers_and_tech_docs/31116-Public-GH-BKDG_3.20_2-4-09.pdf
+		http://support.amd.com/us/Embedded_TechDocs/31116-Public-GH-BKDG_3-28_5-28-09.pdf	
 		for formatting information and other details on the
 		cache index disable.
 Users:    joachim.deguara@amd.com
diff --git a/Documentation/ABI/testing/sysfs-driver-hid-picolcd b/Documentation/ABI/testing/sysfs-driver-hid-picolcd
new file mode 100644
index 00000000000..08579e7e1e8
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-driver-hid-picolcd
@@ -0,0 +1,43 @@
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/operation_mode
+Date:		March 2010
+Contact:	Bruno Prémont <bonbons@linux-vserver.org>
+Description:	Make it possible to switch the PicoLCD device between LCD
+		(firmware) and bootloader (flasher) operation modes.
+
+		Reading: returns list of available modes, the active mode being
+		enclosed in brackets ('[' and ']')
+
+		Writing: causes operation mode switch. Permitted values are
+		the non-active mode names listed when read.
+
+		Note: when switching mode the current PicoLCD HID device gets
+		disconnected and reconnects after above delay (see attribute
+		operation_mode_delay for its value).
+
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/operation_mode_delay
+Date:		April 2010
+Contact:	Bruno Prémont <bonbons@linux-vserver.org>
+Description:	Delay PicoLCD waits before restarting in new mode when
+		operation_mode has changed.
+
+		Reading/Writing: It is expressed in ms and permitted range is
+		0..30000ms.
+
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/fb_update_rate
+Date:		March 2010
+Contact:	Bruno Prémont <bonbons@linux-vserver.org>
+Description:	Make it possible to adjust defio refresh rate.
+
+		Reading: returns list of available refresh rates (expressed in Hz),
+		the active refresh rate being enclosed in brackets ('[' and ']')
+
+		Writing: accepts new refresh rate expressed in integer Hz
+		within permitted rates.
+
+		Note: As device can barely do 2 complete refreshes a second
+		it only makes sense to adjust this value if only one or two
+		tiles get changed and it's not appropriate to expect the application
+		to flush it's tiny changes explicitely at higher than default rate.
+
diff --git a/Documentation/ABI/testing/sysfs-driver-hid-prodikeys b/Documentation/ABI/testing/sysfs-driver-hid-prodikeys
new file mode 100644
index 00000000000..05d988c29a8
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-driver-hid-prodikeys
@@ -0,0 +1,29 @@
+What:		/sys/bus/hid/drivers/prodikeys/.../channel
+Date:		April 2010
+KernelVersion:	2.6.34
+Contact:	Don Prince <dhprince.devel@yahoo.co.uk>
+Description:
+		Allows control (via software) the midi channel to which
+		that the pc-midi keyboard will output.midi data.
+		Range: 0..15
+		Type:  Read/write
+What:		/sys/bus/hid/drivers/prodikeys/.../sustain
+Date:		April 2010
+KernelVersion:	2.6.34
+Contact:	Don Prince <dhprince.devel@yahoo.co.uk>
+Description:
+		Allows control (via software) the sustain duration of a
+		note held by the pc-midi driver.
+		0 means sustain mode is disabled.
+		Range: 0..5000 (milliseconds)
+		Type:  Read/write
+What:		/sys/bus/hid/drivers/prodikeys/.../octave
+Date:		April 2010
+KernelVersion:	2.6.34
+Contact:	Don Prince <dhprince.devel@yahoo.co.uk>
+Description:
+		Controls the octave shift modifier in the pc-midi driver.
+		The octave can be shifted via software up/down 2 octaves.
+		0 means the no ocatve shift.
+		Range: -2..2 (minus 2 to plus 2)
+		Type: Read/Write
diff --git a/Documentation/ABI/testing/sysfs-driver-hid-roccat-kone b/Documentation/ABI/testing/sysfs-driver-hid-roccat-kone
new file mode 100644
index 00000000000..063bda7fe70
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-driver-hid-roccat-kone
@@ -0,0 +1,98 @@
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/actual_dpi
+Date:		March 2010
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	It is possible to switch the dpi setting of the mouse with the
+		press of a button.
+		When read, this file returns the raw number of the actual dpi
+		setting reported by the mouse. This number has to be further
+		processed to receive the real dpi value.
+
+		VALUE DPI
+		1     800
+		2     1200
+		3     1600
+		4     2000
+		5     2400
+		6     3200
+
+		This file is readonly.
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/actual_profile
+Date:		March 2010
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	When read, this file returns the number of the actual profile.
+		This file is readonly.
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/firmware_version
+Date:		March 2010
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	When read, this file returns the raw integer version number of the
+		firmware reported by the mouse. Using the integer value eases
+		further usage in other programs. To receive the real version
+		number the decimal point has to be shifted 2 positions to the
+		left. E.g. a returned value of 138 means 1.38
+		This file is readonly.
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/profile[1-5]
+Date:		March 2010
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	The mouse can store 5 profiles which can be switched by the
+                press of a button. A profile holds informations like button
+                mappings, sensitivity, the colors of the 5 leds and light
+                effects.
+                When read, these files return the respective profile. The
+                returned data is 975 bytes in size.
+		When written, this file lets one write the respective profile
+		data back to the mouse. The data has to be 975 bytes long.
+		The mouse will reject invalid data, whereas the profile number
+		stored in the profile doesn't need to fit the number of the
+		store.
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/settings
+Date:		March 2010
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	When read, this file returns the settings stored in the mouse.
+		The size of the data is 36 bytes and holds information like the
+		startup_profile, tcu state and calibration_data.
+		When written, this file lets write settings back to the mouse.
+		The data has to be 36 bytes long. The mouse will reject invalid
+		data.
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/startup_profile
+Date:		March 2010
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	The integer value of this attribute ranges from 1 to 5.
+                When read, this attribute returns the number of the profile
+                that's active when the mouse is powered on.
+		When written, this file sets the number of the startup profile
+		and the mouse activates this profile immediately.
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/tcu
+Date:		March 2010
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	The mouse has a "Tracking Control Unit" which lets the user
+		calibrate the laser power to fit the mousepad surface.
+		When read, this file returns the current state of the TCU,
+		where 0 means off and 1 means on.
+		Writing 0 in this file will switch the TCU off.
+		Writing 1 in this file will start the calibration which takes
+		around 6 seconds to complete and activates the TCU.
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/weight
+Date:		March 2010
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	The mouse can be equipped with one of four supplied weights
+		ranging from 5 to 20 grams which are recognized by the mouse
+		and its value can be read out. When read, this file returns the
+		raw value returned by the mouse which eases further processing
+		in other software.
+		The values map to the weights as follows:
+
+		VALUE WEIGHT
+		0     none
+		1     5g
+		2     10g
+		3     15g
+		4     20g
+
+		This file is readonly.
diff --git a/Documentation/ABI/testing/sysfs-firmware-sfi b/Documentation/ABI/testing/sysfs-firmware-sfi
new file mode 100644
index 00000000000..4be7d44aeac
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-firmware-sfi
@@ -0,0 +1,15 @@
+What:		/sys/firmware/sfi/tables/
+Date:		May 2010
+Contact:	Len Brown <lenb@kernel.org>
+Description:
+		SFI defines a number of small static memory tables
+		so the kernel can get platform information from firmware.
+
+		The tables are defined in the latest SFI specification:
+		http://simplefirmware.org/documentation
+
+		While the tables are used by the kernel, user-space
+		can observe them this way:
+
+		# cd /sys/firmware/sfi/tables
+		# cat $TABLENAME > $TABLENAME.bin
diff --git a/Documentation/ABI/testing/sysfs-power b/Documentation/ABI/testing/sysfs-power
index d6a801f45b4..2875f1f74a0 100644
--- a/Documentation/ABI/testing/sysfs-power
+++ b/Documentation/ABI/testing/sysfs-power
@@ -114,3 +114,18 @@ Description:
 		if this file contains "1", which is the default.  It may be
 		disabled by writing "0" to this file, in which case all devices
 		will be suspended and resumed synchronously.
+
+What:		/sys/power/wakeup_count
+Date:		July 2010
+Contact:	Rafael J. Wysocki <rjw@sisk.pl>
+Description:
+		The /sys/power/wakeup_count file allows user space to put the
+		system into a sleep state while taking into account the
+		concurrent arrival of wakeup events.  Reading from it returns
+		the current number of registered wakeup events and it blocks if
+		some wakeup events are being processed at the time the file is
+		read from.  Writing to it will only succeed if the current
+		number of wakeup events is equal to the written value and, if
+		successful, will make the kernel abort a subsequent transition
+		to a sleep state if any wakeup events are reported after the
+		write has returned.
diff --git a/Documentation/ABI/testing/sysfs-wacom b/Documentation/ABI/testing/sysfs-wacom
new file mode 100644
index 00000000000..1517976e25c
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-wacom
@@ -0,0 +1,10 @@
+What:		/sys/class/hidraw/hidraw*/device/speed
+Date:		April 2010
+Kernel Version:	2.6.35
+Contact:	linux-bluetooth@vger.kernel.org
+Description:
+		The /sys/class/hidraw/hidraw*/device/speed file controls
+		reporting speed of wacom bluetooth tablet. Reading from
+		this file returns 1 if tablet reports in high speed mode
+		or 0 otherwise. Writing to this file one of these values
+		switches reporting speed.