Merge tag 'usb-3.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB updates from Greg KH:
 "Here's the big USB pull request for 3.14-rc1

  Lots of little things all over the place, and the usual USB gadget
  updates, and XHCI fixes (some for an issue reported by a lot of
  people).  USB PHY updates as well as chipidea updates and fixes.

  All of these have been in the linux-next tree with no reported issues"

* tag 'usb-3.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (318 commits)
  usb: chipidea: udc: using MultO at TD as real mult value for ISO-TX
  usb: chipidea: need to mask INT_STATUS when write otgsc
  usb: chipidea: put hw_phymode_configure before ci_usb_phy_init
  usb: chipidea: Fix Internal error: : 808 [#1] ARM related to STS flag
  usb: chipidea: imx: set CI_HDRC_IMX28_WRITE_FIX for imx28
  usb: chipidea: add freescale imx28 special write register method
  usb: ehci: add freescale imx28 special write register method
  usb: core: check for valid id_table when using the RefId feature
  usb: cdc-wdm: resp_count can be 0 even if WDM_READ is set
  usb: core: bail out if user gives an unknown RefId when using new_id
  usb: core: allow a reference device for new_id
  usb: core: add sanity checks when using bInterfaceClass with new_id
  USB: image: correct spelling mistake in comment
  USB: c67x00: correct spelling mistakes in comments
  usb: delete non-required instances of include <linux/init.h>
  usb:hub set hub->change_bits when over-current happens
  Revert "usb: chipidea: imx: set CI_HDRC_IMX28_WRITE_FIX for imx28"
  xhci: Set scatter-gather limit to avoid failed block writes.
  xhci: Avoid infinite loop when sg urb requires too many trbs
  usb: gadget: remove unused variable in gr_queue_int()
  ...

5 files changed, 53 insertions, 2 deletions

diff --git a/Documentation/ABI/testing/configfs-usb-gadget-ffs b/Documentation/ABI/testing/configfs-usb-gadget-ffs
new file mode 100644
index 00000000000..14343e237e8
--- /dev/null
+++ b/Documentation/ABI/testing/configfs-usb-gadget-ffs
@@ -0,0 +1,9 @@
+What:		/config/usb-gadget/gadget/functions/ffs.name
+Date:		Nov 2013
+KenelVersion:	3.13
+Description:	The purpose of this directory is to create and remove it.
+
+		A corresponding USB function instance is created/removed.
+		There are no attributes here.
+
+		All parameters are set through FunctionFS.
diff --git a/Documentation/ABI/testing/configfs-usb-gadget-loopback b/Documentation/ABI/testing/configfs-usb-gadget-loopback
new file mode 100644
index 00000000000..852b2365a5b
--- /dev/null
+++ b/Documentation/ABI/testing/configfs-usb-gadget-loopback
@@ -0,0 +1,8 @@
+What:		/config/usb-gadget/gadget/functions/Loopback.name
+Date:		Nov 2013
+KenelVersion:	3.13
+Description:
+		The attributes:
+
+		qlen		- depth of loopback queue
+		bulk_buflen	- buffer length
diff --git a/Documentation/ABI/testing/configfs-usb-gadget-sourcesink b/Documentation/ABI/testing/configfs-usb-gadget-sourcesink
new file mode 100644
index 00000000000..a30f3093ef6
--- /dev/null
+++ b/Documentation/ABI/testing/configfs-usb-gadget-sourcesink
@@ -0,0 +1,12 @@
+What:		/config/usb-gadget/gadget/functions/SourceSink.name
+Date:		Nov 2013
+KenelVersion:	3.13
+Description:
+		The attributes:
+
+		pattern		- 0 (all zeros), 1 (mod63), 2 (none)
+		isoc_interval	- 1..16
+		isoc_maxpacket	- 0 - 1023 (fs), 0 - 1024 (hs/ss)
+		isoc_mult	- 0..2 (hs/ss only)
+		isoc_maxburst	- 0..15 (ss only)
+		qlen		- buffer length
diff --git a/Documentation/ABI/testing/sysfs-bus-usb b/Documentation/ABI/testing/sysfs-bus-usb
index 1430f584b26..614d451cee4 100644
--- a/Documentation/ABI/testing/sysfs-bus-usb
+++ b/Documentation/ABI/testing/sysfs-bus-usb
@@ -50,13 +50,19 @@ Description:
 		This may allow the driver to support more hardware than
 		was included in the driver's static device ID support
 		table at compile time. The format for the device ID is:
-		idVendor idProduct bInterfaceClass.
+		idVendor idProduct bInterfaceClass RefIdVendor RefIdProduct
 		The vendor ID and device ID fields are required, the
-		interface class is optional.
+		rest is optional. The Ref* tuple can be used to tell the
+		driver to use the same driver_data for the new device as
+		it is used for the reference device.
 		Upon successfully adding an ID, the driver will probe
 		for the device and attempt to bind to it.  For example:
 		# echo "8086 10f5" > /sys/bus/usb/drivers/foo/new_id
 
+		Here add a new device (0458:7045) using driver_data from
+		an already supported device (0458:704c):
+		# echo "0458 7045 0 0458 704c" > /sys/bus/usb/drivers/foo/new_id
+
 		Reading from this file will list all dynamically added
 		device IDs in the same format, with one entry per
 		line. For example:
diff --git a/Documentation/ABI/testing/sysfs-platform-tahvo-usb b/Documentation/ABI/testing/sysfs-platform-tahvo-usb
new file mode 100644
index 00000000000..f6e20ce4b53
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-platform-tahvo-usb
@@ -0,0 +1,16 @@
+What:		/sys/bus/platform/devices/tahvo-usb/otg_mode
+Date:		December 2013
+Contact:	Aaro Koskinen <aaro.koskinen@iki.fi>
+Description:
+		Set or read the current OTG mode. Valid values are "host" and
+		"peripheral".
+
+		Reading: returns the current mode.
+
+What:		/sys/bus/platform/devices/tahvo-usb/vbus
+Date:		December 2013
+Contact:	Aaro Koskinen <aaro.koskinen@iki.fi>
+Description:
+		Read the current VBUS state.
+
+		Reading: returns "on" or "off".