Merge branch 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media

* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (57 commits)
  [media] as3645a: Fix compilation by including slab.h
  [media] s5p-fimc: Remove linux/version.h include from fimc-mdevice.c
  [media] s5p-mfc: Remove linux/version.h include from s5p_mfc.c
  [media] ds3000: using logical && instead of bitwise &
  [media] v4l2-ctrls: make control names consistent
  [media] DVB: dib0700, add support for Nova-TD LEDs
  [media] DVB: dib0700, add corrected Nova-TD frontend_attach
  [media] DVB: dib0700, separate stk7070pd initialization
  [media] DVB: dib0700, move Nova-TD Stick to a separate set
  [media] : add MODULE_FIRMWARE to dib0700
  [media] DVB-CORE: remove superfluous DTV_CMDs
  [media] s5p-jpeg: adapt to recent videobuf2 changes
  [media] s5p-g2d: fixed a bug in controls setting function
  [media] s5p-mfc: Fix volatile controls setup
  [media] drivers/media/video/s5p-mfc/s5p_mfc.c: adjust double test
  [media] drivers/media/video/s5p-fimc/fimc-capture.c: adjust double test
  [media] s5p-fimc: Fix incorrect control ID assignment
  [media] dvb_frontend: Don't call get_frontend() if idle
  [media] DocBook/dvbproperty.xml: Remove DTV_MODULATION from ISDB-T
  [media] DocBook/dvbproperty.xml: Fix ISDB-T delivery system parameters
  ...

6 files changed, 42 insertions, 27 deletions

diff --git a/Documentation/DocBook/media/dvb/dvbproperty.xml b/Documentation/DocBook/media/dvb/dvbproperty.xml
index ffee1fbbc00..c7a4ca51785 100644
--- a/Documentation/DocBook/media/dvb/dvbproperty.xml
+++ b/Documentation/DocBook/media/dvb/dvbproperty.xml
@@ -163,14 +163,16 @@ get/set up to 64 properties. The actual meaning of each property is described on
 	<section id="DTV-FREQUENCY">
 		<title><constant>DTV_FREQUENCY</constant></title>
 
-		<para>Central frequency of the channel, in HZ.</para>
+		<para>Central frequency of the channel.</para>
 
 		<para>Notes:</para>
-		<para>1)For ISDB-T, the channels are usually transmitted with an offset of 143kHz.
+		<para>1)For satellital delivery systems, it is measured in kHz.
+			For the other ones, it is measured in Hz.</para>
+		<para>2)For ISDB-T, the channels are usually transmitted with an offset of 143kHz.
 			E.g. a valid frequncy could be 474143 kHz. The stepping is bound to the bandwidth of
 			the channel which is 6MHz.</para>
 
-		<para>2)As in ISDB-Tsb the channel consists of only one or three segments the
+		<para>3)As in ISDB-Tsb the channel consists of only one or three segments the
 			frequency step is 429kHz, 3*429 respectively. As for ISDB-T the
 			central frequency of the channel is expected.</para>
 	</section>
@@ -735,14 +737,10 @@ typedef enum fe_hierarchy {
 			<listitem><para><link linkend="DTV-TUNE"><constant>DTV_TUNE</constant></link></para></listitem>
 			<listitem><para><link linkend="DTV-CLEAR"><constant>DTV_CLEAR</constant></link></para></listitem>
 			<listitem><para><link linkend="DTV-FREQUENCY"><constant>DTV_FREQUENCY</constant></link></para></listitem>
-			<listitem><para><link linkend="DTV-MODULATION"><constant>DTV_MODULATION</constant></link></para></listitem>
 			<listitem><para><link linkend="DTV-BANDWIDTH-HZ"><constant>DTV_BANDWIDTH_HZ</constant></link></para></listitem>
 			<listitem><para><link linkend="DTV-INVERSION"><constant>DTV_INVERSION</constant></link></para></listitem>
-			<listitem><para><link linkend="DTV-CODE-RATE-HP"><constant>DTV_CODE_RATE_HP</constant></link></para></listitem>
-			<listitem><para><link linkend="DTV-CODE-RATE-LP"><constant>DTV_CODE_RATE_LP</constant></link></para></listitem>
 			<listitem><para><link linkend="DTV-GUARD-INTERVAL"><constant>DTV_GUARD_INTERVAL</constant></link></para></listitem>
 			<listitem><para><link linkend="DTV-TRANSMISSION-MODE"><constant>DTV_TRANSMISSION_MODE</constant></link></para></listitem>
-			<listitem><para><link linkend="DTV-HIERARCHY"><constant>DTV_HIERARCHY</constant></link></para></listitem>
 			<listitem><para><link linkend="DTV-ISDBT-LAYER-ENABLED"><constant>DTV_ISDBT_LAYER_ENABLED</constant></link></para></listitem>
 			<listitem><para><link linkend="DTV-ISDBT-PARTIAL-RECEPTION"><constant>DTV_ISDBT_PARTIAL_RECEPTION</constant></link></para></listitem>
 			<listitem><para><link linkend="DTV-ISDBT-SOUND-BROADCASTING"><constant>DTV_ISDBT_SOUND_BROADCASTING</constant></link></para></listitem>
diff --git a/Documentation/DocBook/media/v4l/vidioc-g-ext-ctrls.xml b/Documentation/DocBook/media/v4l/vidioc-g-ext-ctrls.xml
index 6f1f9a629dc..b17a7aac699 100644
--- a/Documentation/DocBook/media/v4l/vidioc-g-ext-ctrls.xml
+++ b/Documentation/DocBook/media/v4l/vidioc-g-ext-ctrls.xml
@@ -183,7 +183,12 @@ applications must set the array to zero.</entry>
 	    <entry>__u32</entry>
 	    <entry><structfield>ctrl_class</structfield></entry>
 	    <entry>The control class to which all controls belong, see
-<xref linkend="ctrl-class" />.</entry>
+<xref linkend="ctrl-class" />. Drivers that use a kernel framework for handling
+controls will also accept a value of 0 here, meaning that the controls can
+belong to any control class. Whether drivers support this can be tested by setting
+<structfield>ctrl_class</structfield> to 0 and calling <constant>VIDIOC_TRY_EXT_CTRLS</constant>
+with a <structfield>count</structfield> of 0. If that succeeds, then the driver
+supports this feature.</entry>
 	  </row>
 	  <row>
 	    <entry>__u32</entry>
@@ -194,10 +199,13 @@ also be zero.</entry>
 	  <row>
 	    <entry>__u32</entry>
 	    <entry><structfield>error_idx</structfield></entry>
-	    <entry>Set by the driver in case of an error. It is the
-index of the control causing the error or equal to 'count' when the
-error is not associated with a particular control. Undefined when the
-ioctl returns 0 (success).</entry>
+	    <entry>Set by the driver in case of an error. If it is equal
+to <structfield>count</structfield>, then no actual changes were made to
+controls. In other words, the error was not associated with setting a particular
+control. If it is another value, then only the controls up to <structfield>error_idx-1</structfield>
+were modified and control <structfield>error_idx</structfield> is the one that
+caused the error. The <structfield>error_idx</structfield> value is undefined
+if the ioctl returned 0 (success).</entry>
 	  </row>
 	  <row>
 	    <entry>__u32</entry>
diff --git a/Documentation/DocBook/media/v4l/vidioc-g-fbuf.xml b/Documentation/DocBook/media/v4l/vidioc-g-fbuf.xml
index 93817f33703..7c63815e7af 100644
--- a/Documentation/DocBook/media/v4l/vidioc-g-fbuf.xml
+++ b/Documentation/DocBook/media/v4l/vidioc-g-fbuf.xml
@@ -364,15 +364,20 @@ capability and it is cleared otherwise.</entry>
 	  <row>
 	    <entry><constant>V4L2_FBUF_FLAG_OVERLAY</constant></entry>
 	    <entry>0x0002</entry>
-	    <entry>The frame buffer is an overlay surface the same
-size as the capture. [?]</entry>
-	  </row>
-	  <row>
-	    <entry spanname="hspan">The purpose of
-<constant>V4L2_FBUF_FLAG_OVERLAY</constant> was never quite clear.
-Most drivers seem to ignore this flag. For compatibility with the
-<wordasword>bttv</wordasword> driver applications should set the
-<constant>V4L2_FBUF_FLAG_OVERLAY</constant> flag.</entry>
+	    <entry>If this flag is set for a video capture device, then the
+driver will set the initial overlay size to cover the full framebuffer size,
+otherwise the existing overlay size (as set by &VIDIOC-S-FMT;) will be used.
+
+Only one video capture driver (bttv) supports this flag. The use of this flag
+for capture devices is deprecated. There is no way to detect which drivers
+support this flag, so the only reliable method of setting the overlay size is
+through &VIDIOC-S-FMT;.
+
+If this flag is set for a video output device, then the video output overlay
+window is relative to the top-left corner of the framebuffer and restricted
+to the size of the framebuffer. If it is cleared, then the video output
+overlay window is relative to the video output display.
+            </entry>
 	  </row>
 	  <row>
 	    <entry><constant>V4L2_FBUF_FLAG_CHROMAKEY</constant></entry>
diff --git a/Documentation/DocBook/media/v4l/vidioc-g-frequency.xml b/Documentation/DocBook/media/v4l/vidioc-g-frequency.xml
index 16431813beb..66e9a525786 100644
--- a/Documentation/DocBook/media/v4l/vidioc-g-frequency.xml
+++ b/Documentation/DocBook/media/v4l/vidioc-g-frequency.xml
@@ -98,8 +98,11 @@ the &v4l2-output; <structfield>modulator</structfield> field and the
 	    <entry>&v4l2-tuner-type;</entry>
 	    <entry><structfield>type</structfield></entry>
 	    <entry>The tuner type. This is the same value as in the
-&v4l2-tuner; <structfield>type</structfield> field. The field is not
-applicable to modulators, &ie; ignored by drivers.</entry>
+&v4l2-tuner; <structfield>type</structfield> field. The type must be set
+to <constant>V4L2_TUNER_RADIO</constant> for <filename>/dev/radioX</filename>
+device nodes, and to <constant>V4L2_TUNER_ANALOG_TV</constant>
+for all others. The field is not applicable to modulators, &ie; ignored
+by drivers.</entry>
 	  </row>
 	  <row>
 	    <entry>__u32</entry>
diff --git a/Documentation/DocBook/media/v4l/vidioc-g-input.xml b/Documentation/DocBook/media/v4l/vidioc-g-input.xml
index 08ae82f131f..1d43065090d 100644
--- a/Documentation/DocBook/media/v4l/vidioc-g-input.xml
+++ b/Documentation/DocBook/media/v4l/vidioc-g-input.xml
@@ -61,8 +61,8 @@ desired input in an integer and call the
 <constant>VIDIOC_S_INPUT</constant> ioctl with a pointer to this
 integer. Side effects are possible. For example inputs may support
 different video standards, so the driver may implicitly switch the
-current standard. It is good practice to select an input before
-querying or negotiating any other parameters.</para>
+current standard. Because of these possible side effects applications
+must select an input before querying or negotiating any other parameters.</para>
 
     <para>Information about video inputs is available using the
 &VIDIOC-ENUMINPUT; ioctl.</para>
diff --git a/Documentation/DocBook/media/v4l/vidioc-g-output.xml b/Documentation/DocBook/media/v4l/vidioc-g-output.xml
index fd45f1c13cc..4533068ecb8 100644
--- a/Documentation/DocBook/media/v4l/vidioc-g-output.xml
+++ b/Documentation/DocBook/media/v4l/vidioc-g-output.xml
@@ -61,8 +61,9 @@ desired output in an integer and call the
 <constant>VIDIOC_S_OUTPUT</constant> ioctl with a pointer to this integer.
 Side effects are possible. For example outputs may support different
 video standards, so the driver may implicitly switch the current
-standard. It is good practice to select an output before querying or
-negotiating any other parameters.</para>
+standard.
+standard. Because of these possible side effects applications
+must select an output before querying or negotiating any other parameters.</para>
 
     <para>Information about video outputs is available using the
 &VIDIOC-ENUMOUTPUT; ioctl.</para>