Merge tag 'sound-3.8' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound

Pull sound updates from Takashi Iwai:
 "This update contains a fairly wide range of changes all over in sound
  subdirectory, mainly because of UAPI header moves by David and __dev*
  annotation removals by Bill.  Other highlights are:

   - Introduced the support for wallclock timestamps in ALSA PCM core

   - Add the poll loop implementation for HD-audio jack detection

   - Yet more VGA-switcheroo fixes for HD-audio

   - New VIA HD-audio codec support

   - More fixes on resource management in USB audio and MIDI drivers

   - More quirks for USB-audio ASUS Xonar U3, Reloop Play, Focusrite,
     Roland VG-99, etc

   - Add support for FastTrack C400 usb-audio

   - Clean ups in many drivers regarding firmware loading

   - Add PSC724 Ultiimate Edge support to ice1712

   - A few hdspm driver updates

   - New Stanton SCS.1d/1m FireWire driver

   - Standardisation of the logging in ASoC codes

   - DT and dmaengine support for ASoC Atmel

   - Support for Wolfson ADSP cores

   - New drivers for Freescale/iVeia P1022 and Maxim MAX98090

   - Lots of other ASoC driver fixes and developments"

Fix up trivial conflicts.  And go out on a limb and assume the dts file
'status' field of one of the conflicting things was supposed to be
"disabled", not "disable" like in pretty much all other cases.

* tag 'sound-3.8' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (341 commits)
  ALSA: hda - Move runtime PM check to runtime_idle callback
  ALSA: hda - Add stereo-dmic fixup for Acer Aspire One 522
  ALSA: hda - Avoid doubly suspend after vga switcheroo
  ALSA: usb-audio: Enable S/PDIF on the ASUS Xonar U3
  ALSA: hda - Check validity of CORB/RIRB WP reads
  ALSA: hda - use usleep_range in link reset and change timeout check
  ALSA: HDA: VIA: Add support for codec VT1808.
  ALSA: HDA: VIA Add support for codec VT1705CF.
  ASoC: codecs: remove __dev* attributes
  ASoC: utils: remove __dev* attributes
  ASoC: ux500: remove __dev* attributes
  ASoC: txx9: remove __dev* attributes
  ASoC: tegra: remove __dev* attributes
  ASoC: spear: remove __dev* attributes
  ASoC: sh: remove __dev* attributes
  ASoC: s6000: remove __dev* attributes
  ASoC: OMAP: remove __dev* attributes
  ASoC: nuc900: remove __dev* attributes
  ASoC: mxs: remove __dev* attributes
  ASoC: kirkwood: remove __dev* attributes
  ...

1 files changed, 28 insertions, 57 deletions

diff --git a/Documentation/DocBook/writing-an-alsa-driver.tmpl b/Documentation/DocBook/writing-an-alsa-driver.tmpl
index cab4ec58e46..fb32aead5a0 100644
--- a/Documentation/DocBook/writing-an-alsa-driver.tmpl
+++ b/Documentation/DocBook/writing-an-alsa-driver.tmpl
@@ -433,9 +433,9 @@
   /* chip-specific constructor
    * (see "Management of Cards and Components")
    */
-  static int __devinit snd_mychip_create(struct snd_card *card,
-                                         struct pci_dev *pci,
-                                         struct mychip **rchip)
+  static int snd_mychip_create(struct snd_card *card,
+                               struct pci_dev *pci,
+                               struct mychip **rchip)
   {
           struct mychip *chip;
           int err;
@@ -475,8 +475,8 @@
   }
 
   /* constructor -- see "Constructor" sub-section */
-  static int __devinit snd_mychip_probe(struct pci_dev *pci,
-                               const struct pci_device_id *pci_id)
+  static int snd_mychip_probe(struct pci_dev *pci,
+                              const struct pci_device_id *pci_id)
   {
           static int dev;
           struct snd_card *card;
@@ -526,7 +526,7 @@
   }
 
   /* destructor -- see the "Destructor" sub-section */
-  static void __devexit snd_mychip_remove(struct pci_dev *pci)
+  static void snd_mychip_remove(struct pci_dev *pci)
   {
           snd_card_free(pci_get_drvdata(pci));
           pci_set_drvdata(pci, NULL);
@@ -542,9 +542,8 @@
       <para>
         The real constructor of PCI drivers is the <function>probe</function> callback.
       The <function>probe</function> callback and other component-constructors which are called
-      from the <function>probe</function> callback should be defined with
-      the <parameter>__devinit</parameter> prefix. You 
-      cannot use the <parameter>__init</parameter> prefix for them,
+      from the <function>probe</function> callback cannot be used with
+      the <parameter>__init</parameter> prefix
       because any PCI device could be a hotplug device. 
       </para>
 
@@ -728,7 +727,7 @@
         <informalexample>
           <programlisting>
 <![CDATA[
-  static void __devexit snd_mychip_remove(struct pci_dev *pci)
+  static void snd_mychip_remove(struct pci_dev *pci)
   {
           snd_card_free(pci_get_drvdata(pci));
           pci_set_drvdata(pci, NULL);
@@ -1059,14 +1058,6 @@
       </para>
 
       <para>
-        As further notes, the destructors (both
-      <function>snd_mychip_dev_free</function> and
-      <function>snd_mychip_free</function>) cannot be defined with
-      the <parameter>__devexit</parameter> prefix, because they may be
-      called from the constructor, too, at the false path. 
-      </para>
-
-      <para>
       For a device which allows hotplugging, you can use
       <function>snd_card_free_when_closed</function>.  This one will
       postpone the destruction until all devices are closed.
@@ -1120,9 +1111,9 @@
   }
 
   /* chip-specific constructor */
-  static int __devinit snd_mychip_create(struct snd_card *card,
-                                         struct pci_dev *pci,
-                                         struct mychip **rchip)
+  static int snd_mychip_create(struct snd_card *card,
+                               struct pci_dev *pci,
+                               struct mychip **rchip)
   {
           struct mychip *chip;
           int err;
@@ -1200,7 +1191,7 @@
           .name = KBUILD_MODNAME,
           .id_table = snd_mychip_ids,
           .probe = snd_mychip_probe,
-          .remove = __devexit_p(snd_mychip_remove),
+          .remove = snd_mychip_remove,
   };
 
   /* module initialization */
@@ -1465,11 +1456,6 @@
       </para>
 
       <para>
-      Again, remember that you cannot
-      use the <parameter>__devexit</parameter> prefix for this destructor. 
-      </para>
-
-      <para>
       We didn't implement the hardware disabling part in the above.
       If you need to do this, please note that the destructor may be
       called even before the initialization of the chip is completed.
@@ -1619,7 +1605,7 @@
           .name = KBUILD_MODNAME,
           .id_table = snd_mychip_ids,
           .probe = snd_mychip_probe,
-          .remove = __devexit_p(snd_mychip_remove),
+          .remove = snd_mychip_remove,
   };
 ]]>
           </programlisting>
@@ -1630,11 +1616,7 @@
         The <structfield>probe</structfield> and
       <structfield>remove</structfield> functions have already
       been defined in the previous sections.
-      The <structfield>remove</structfield> function should
-      be defined with the 
-      <function>__devexit_p()</function> macro, so that it's not
-      defined for built-in (and non-hot-pluggable) case. The
-      <structfield>name</structfield> 
+      The <structfield>name</structfield>
       field is the name string of this device. Note that you must not
       use a slash <quote>/</quote> in this string. 
       </para>
@@ -1665,9 +1647,7 @@
       <para>
         Note that these module entries are tagged with
       <parameter>__init</parameter> and 
-      <parameter>__exit</parameter> prefixes, not
-      <parameter>__devinit</parameter> nor
-      <parameter>__devexit</parameter>.
+      <parameter>__exit</parameter> prefixes.
       </para>
 
       <para>
@@ -1918,7 +1898,7 @@
    */
 
   /* create a pcm device */
-  static int __devinit snd_mychip_new_pcm(struct mychip *chip)
+  static int snd_mychip_new_pcm(struct mychip *chip)
   {
           struct snd_pcm *pcm;
           int err;
@@ -1957,7 +1937,7 @@
         <informalexample>
           <programlisting>
 <![CDATA[
-  static int __devinit snd_mychip_new_pcm(struct mychip *chip)
+  static int snd_mychip_new_pcm(struct mychip *chip)
   {
           struct snd_pcm *pcm;
           int err;
@@ -2124,7 +2104,7 @@
           ....
   }
 
-  static int __devinit snd_mychip_new_pcm(struct mychip *chip)
+  static int snd_mychip_new_pcm(struct mychip *chip)
   {
           struct snd_pcm *pcm;
           ....
@@ -3399,7 +3379,7 @@ struct _snd_pcm_runtime {
 	  <title>Definition of a Control</title>
           <programlisting>
 <![CDATA[
-  static struct snd_kcontrol_new my_control __devinitdata = {
+  static struct snd_kcontrol_new my_control = {
           .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
           .name = "PCM Playback Switch",
           .index = 0,
@@ -3415,13 +3395,6 @@ struct _snd_pcm_runtime {
       </para>
 
       <para>
-        Most likely the control is created via
-      <function>snd_ctl_new1()</function>, and in such a case, you can
-      add the <parameter>__devinitdata</parameter> prefix to the
-      definition as above. 
-      </para>
-
-      <para>
         The <structfield>iface</structfield> field specifies the control
       type, <constant>SNDRV_CTL_ELEM_IFACE_XXX</constant>, which
       is usually <constant>MIXER</constant>.
@@ -3847,10 +3820,8 @@ struct _snd_pcm_runtime {
 
       <para>
         <function>snd_ctl_new1()</function> allocates a new
-      <structname>snd_kcontrol</structname> instance (that's why the definition
-      of <parameter>my_control</parameter> can be with
-      the <parameter>__devinitdata</parameter> 
-      prefix), and <function>snd_ctl_add</function> assigns the given
+      <structname>snd_kcontrol</structname> instance,
+      and <function>snd_ctl_add</function> assigns the given
       control component to the card. 
       </para>
     </section>
@@ -3896,7 +3867,7 @@ struct _snd_pcm_runtime {
 <![CDATA[
   static DECLARE_TLV_DB_SCALE(db_scale_my_control, -4050, 150, 0);
 
-  static struct snd_kcontrol_new my_control __devinitdata = {
+  static struct snd_kcontrol_new my_control = {
           ...
           .access = SNDRV_CTL_ELEM_ACCESS_READWRITE |
                     SNDRV_CTL_ELEM_ACCESS_TLV_READ,
@@ -5761,8 +5732,8 @@ struct _snd_pcm_runtime {
       <informalexample>
         <programlisting>
 <![CDATA[
-  static int __devinit snd_mychip_probe(struct pci_dev *pci,
-                               const struct pci_device_id *pci_id)
+  static int snd_mychip_probe(struct pci_dev *pci,
+                              const struct pci_device_id *pci_id)
   {
           ....
           struct snd_card *card;
@@ -5787,8 +5758,8 @@ struct _snd_pcm_runtime {
       <informalexample>
         <programlisting>
 <![CDATA[
-  static int __devinit snd_mychip_probe(struct pci_dev *pci,
-                               const struct pci_device_id *pci_id)
+  static int snd_mychip_probe(struct pci_dev *pci,
+                              const struct pci_device_id *pci_id)
   {
           ....
           struct snd_card *card;
@@ -5825,7 +5796,7 @@ struct _snd_pcm_runtime {
           .name = KBUILD_MODNAME,
           .id_table = snd_my_ids,
           .probe = snd_my_probe,
-          .remove = __devexit_p(snd_my_remove),
+          .remove = snd_my_remove,
   #ifdef CONFIG_PM
           .suspend = snd_my_suspend,
           .resume = snd_my_resume,