merge by hand - fix up rejections in Documentation/DocBook/Makefile

5 files changed, 214 insertions, 961 deletions

diff --git a/Documentation/DocBook/Makefile b/Documentation/DocBook/Makefile
index e69d6865945..87da3478fad 100644
--- a/Documentation/DocBook/Makefile
+++ b/Documentation/DocBook/Makefile
@@ -7,11 +7,10 @@
 # list of DOCBOOKS.
 
 DOCBOOKS := wanbook.xml z8530book.xml mcabook.xml videobook.xml \
-	    kernel-hacking.xml kernel-locking.xml via-audio.xml \
-	    deviceiobook.xml procfs-guide.xml tulip-user.xml \
-	    writing_usb_driver.xml sis900.xml kernel-api.xml \
-	    journal-api.xml lsm.xml usb.xml gadget.xml libata.xml \
-	    mtdnand.xml librs.xml
+	    kernel-hacking.xml kernel-locking.xml deviceiobook.xml \
+	    procfs-guide.xml writing_usb_driver.xml \
+	    sis900.xml kernel-api.xml journal-api.xml lsm.xml usb.xml \
+	    gadget.xml libata.xml mtdnand.xml librs.xml
 
 ###
 # The build process is as follows (targets):
@@ -42,14 +41,16 @@ MAN := $(patsubst %.xml, %.9, $(BOOKS))
 mandocs: $(MAN)
 
 installmandocs: mandocs
-	$(MAKEMAN) install Documentation/DocBook/man
+	mkdir -p /usr/local/man/man9/
+	install Documentation/DocBook/man/*.9.gz /usr/local/man/man9/
 
 ###
 #External programs used
 KERNELDOC = scripts/kernel-doc
 DOCPROC   = scripts/basic/docproc
-SPLITMAN  = $(PERL) $(srctree)/scripts/split-man
-MAKEMAN   = $(PERL) $(srctree)/scripts/makeman
+
+XMLTOFLAGS = -m Documentation/DocBook/stylesheet.xsl
+#XMLTOFLAGS += --skip-validation
 
 ###
 # DOCPROC is used for two purposes:
@@ -96,45 +97,44 @@ $(obj)/procfs-guide.xml: $(C-procfs-example2)
 # Rules to generate postscript, PDF and HTML
 # db2html creates a directory. Generate a html file used for timestamp
 
-quiet_cmd_db2ps = DB2PS   $@
-      cmd_db2ps = db2ps -o $(dir $@) $<
+quiet_cmd_db2ps = XMLTO    $@
+      cmd_db2ps = xmlto ps $(XMLTOFLAGS) -o $(dir $@) $<
 %.ps : %.xml
-	@(which db2ps > /dev/null 2>&1) || \
-	 (echo "*** You need to install DocBook stylesheets ***"; \
+	@(which xmlto > /dev/null 2>&1) || \
+	 (echo "*** You need to install xmlto ***"; \
 	  exit 1)
 	$(call cmd,db2ps)
 
-quiet_cmd_db2pdf = DB2PDF  $@
-      cmd_db2pdf = db2pdf -o $(dir $@) $<
+quiet_cmd_db2pdf = XMLTO   $@
+      cmd_db2pdf = xmlto pdf $(XMLTOFLAGS) -o $(dir $@) $<
 %.pdf : %.xml
-	@(which db2pdf > /dev/null 2>&1) || \
-	 (echo "*** You need to install DocBook stylesheets ***"; \
+	@(which xmlto > /dev/null 2>&1) || \
+	 (echo "*** You need to install xmlto ***"; \
 	  exit 1)
 	$(call cmd,db2pdf)
 
-quiet_cmd_db2html = DB2HTML $@
-      cmd_db2html = db2html -o $(patsubst %.html,%,$@) $< &&		      \
-		echo '<a HREF="$(patsubst %.html,%,$(notdir $@))/book1.html"> \
+quiet_cmd_db2html = XMLTO  $@
+      cmd_db2html = xmlto xhtml $(XMLTOFLAGS) -o $(patsubst %.html,%,$@) $< && \
+		echo '<a HREF="$(patsubst %.html,%,$(notdir $@))/index.html"> \
          Goto $(patsubst %.html,%,$(notdir $@))</a><p>' > $@
 
 %.html:	%.xml
-	@(which db2html > /dev/null 2>&1) || \
-	 (echo "*** You need to install DocBook stylesheets ***"; \
+	@(which xmlto > /dev/null 2>&1) || \
+	 (echo "*** You need to install xmlto ***"; \
 	  exit 1)
 	@rm -rf $@ $(patsubst %.html,%,$@)
 	$(call cmd,db2html)
 	@if [ ! -z "$(PNG-$(basename $(notdir $@)))" ]; then \
             cp $(PNG-$(basename $(notdir $@))) $(patsubst %.html,%,$@); fi
 
-###
-# Rule to generate man files - output is placed in the man subdirectory
-
-%.9:	%.xml
-ifneq ($(KBUILD_SRC),)
-	$(Q)mkdir -p $(objtree)/Documentation/DocBook/man
-endif
-	$(SPLITMAN) $< $(objtree)/Documentation/DocBook/man "$(VERSION).$(PATCHLEVEL).$(SUBLEVEL)"
-	$(MAKEMAN) convert $(objtree)/Documentation/DocBook/man $<
+quiet_cmd_db2man = XMLTO   $@
+      cmd_db2man = if grep -q refentry $<; then xmlto man $(XMLTOFLAGS) -o $(obj)/man $< ; gzip -f $(obj)/man/*.9; fi
+%.9 : %.xml
+	@(which xmlto > /dev/null 2>&1) || \
+	 (echo "*** You need to install xmlto ***"; \
+	  exit 1)
+	$(call cmd,db2man)
+	@touch $@
 
 ###
 # Rules to generate postscripts and PNG imgages from .fig format files
diff --git a/Documentation/DocBook/kernel-api.tmpl b/Documentation/DocBook/kernel-api.tmpl
index 1bd20c86028..757cef8f849 100644
--- a/Documentation/DocBook/kernel-api.tmpl
+++ b/Documentation/DocBook/kernel-api.tmpl
@@ -49,13 +49,33 @@
 !Iinclude/asm-i386/unaligned.h
      </sect1>
 
-<!-- FIXME:
-  kernel/sched.c has no docs, which stuffs up the sgml.  Comment
-  out until somebody adds docs.  KAO
      <sect1><title>Delaying, scheduling, and timer routines</title>
-X!Ekernel/sched.c
+!Iinclude/linux/sched.h
+!Ekernel/sched.c
+!Ekernel/timer.c
      </sect1>
-KAO -->
+     <sect1><title>Internal Functions</title>
+!Ikernel/exit.c
+!Ikernel/signal.c
+     </sect1>
+
+     <sect1><title>Kernel objects manipulation</title>
+<!--
+X!Iinclude/linux/kobject.h
+-->
+!Elib/kobject.c
+     </sect1>
+
+     <sect1><title>Kernel utility functions</title>
+!Iinclude/linux/kernel.h
+<!-- This needs to clean up to make kernel-doc happy
+X!Ekernel/printk.c
+ -->
+!Ekernel/panic.c
+!Ekernel/sys.c
+!Ekernel/rcupdate.c
+     </sect1>
+
   </chapter>
 
   <chapter id="adt">
@@ -81,7 +101,9 @@ KAO -->
 !Elib/vsprintf.c
      </sect1>
      <sect1><title>String Manipulation</title>
-!Ilib/string.c
+<!-- All functions are exported at now
+X!Ilib/string.c
+ -->
 !Elib/string.c
      </sect1>
      <sect1><title>Bit Operations</title>
@@ -98,6 +120,25 @@ KAO -->
 !Iinclude/asm-i386/uaccess.h
 !Iarch/i386/lib/usercopy.c
      </sect1>
+     <sect1><title>More Memory Management Functions</title>
+!Iinclude/linux/rmap.h
+!Emm/readahead.c
+!Emm/filemap.c
+!Emm/memory.c
+!Emm/vmalloc.c
+!Emm/mempool.c
+!Emm/page-writeback.c
+!Emm/truncate.c
+     </sect1>
+  </chapter>
+
+
+  <chapter id="ipc">
+     <title>Kernel IPC facilities</title>
+
+     <sect1><title>IPC utilities</title>
+!Iipc/util.c
+     </sect1>
   </chapter>
 
   <chapter id="kfifo">
@@ -114,6 +155,10 @@ KAO -->
      <sect1><title>sysctl interface</title>
 !Ekernel/sysctl.c
      </sect1>
+
+     <sect1><title>proc filesystem interface</title>
+!Ifs/proc/base.c
+     </sect1>
   </chapter>
 
   <chapter id="debugfs">
@@ -127,6 +172,10 @@ KAO -->
 
   <chapter id="vfs">
      <title>The Linux VFS</title>
+     <sect1><title>The Filesystem types</title>
+!Iinclude/linux/fs.h
+!Einclude/linux/fs.h
+     </sect1>
      <sect1><title>The Directory Cache</title>
 !Efs/dcache.c
 !Iinclude/linux/dcache.h
@@ -142,13 +191,31 @@ KAO -->
 !Efs/locks.c
 !Ifs/locks.c
      </sect1>
+     <sect1><title>Other Functions</title>
+!Efs/mpage.c
+!Efs/namei.c
+!Efs/buffer.c
+!Efs/bio.c
+!Efs/seq_file.c
+!Efs/filesystems.c
+!Efs/fs-writeback.c
+!Efs/block_dev.c
+     </sect1>
   </chapter>
 
   <chapter id="netcore">
      <title>Linux Networking</title>
+     <sect1><title>Networking Base Types</title>
+!Iinclude/linux/net.h
+     </sect1>
      <sect1><title>Socket Buffer Functions</title>
 !Iinclude/linux/skbuff.h
+!Iinclude/net/sock.h
+!Enet/socket.c
 !Enet/core/skbuff.c
+!Enet/core/sock.c
+!Enet/core/datagram.c
+!Enet/core/stream.c
      </sect1>
      <sect1><title>Socket Filter</title>
 !Enet/core/filter.c
@@ -158,6 +225,14 @@ KAO -->
 !Enet/core/gen_stats.c
 !Enet/core/gen_estimator.c
      </sect1>
+     <sect1><title>SUN RPC subsystem</title>
+<!-- The !D functionality is not perfect, garbage has to be protected by comments
+!Dnet/sunrpc/sunrpc_syms.c
+-->
+!Enet/sunrpc/xdr.c
+!Enet/sunrpc/svcsock.c
+!Enet/sunrpc/sched.c
+     </sect1>
   </chapter>
 
   <chapter id="netdev">
@@ -194,11 +269,26 @@ X!Ekernel/module.c
 !Iarch/i386/kernel/irq.c
      </sect1>
 
+     <sect1><title>Resources Management</title>
+!Ekernel/resource.c
+     </sect1>
+
      <sect1><title>MTRR Handling</title>
 !Earch/i386/kernel/cpu/mtrr/main.c
      </sect1>
      <sect1><title>PCI Support Library</title>
 !Edrivers/pci/pci.c
+!Edrivers/pci/pci-driver.c
+!Edrivers/pci/remove.c
+!Edrivers/pci/pci-acpi.c
+<!-- kerneldoc does not understand to __devinit
+X!Edrivers/pci/search.c
+ -->
+!Edrivers/pci/msi.c
+!Edrivers/pci/bus.c
+!Edrivers/pci/hotplug.c
+!Edrivers/pci/probe.c
+!Edrivers/pci/rom.c
      </sect1>
      <sect1><title>PCI Hotplug Support Library</title>
 !Edrivers/pci/hotplug/pci_hotplug_core.c
@@ -223,6 +313,14 @@ X!Earch/i386/kernel/mca.c
 !Efs/devfs/base.c
   </chapter>
 
+  <chapter id="sysfs">
+     <title>The Filesystem for Exporting Kernel Objects</title>
+!Efs/sysfs/file.c
+!Efs/sysfs/dir.c
+!Efs/sysfs/symlink.c
+!Efs/sysfs/bin.c
+  </chapter>
+
   <chapter id="security">
      <title>Security Framework</title>
 !Esecurity/security.c
@@ -233,6 +331,61 @@ X!Earch/i386/kernel/mca.c
 !Ekernel/power/pm.c
   </chapter>
 
+  <chapter id="devdrivers">
+     <title>Device drivers infrastructure</title>
+     <sect1><title>Device Drivers Base</title>
+<!--
+X!Iinclude/linux/device.h
+-->
+!Edrivers/base/driver.c
+!Edrivers/base/class_simple.c
+!Edrivers/base/core.c
+!Edrivers/base/firmware_class.c
+!Edrivers/base/transport_class.c
+!Edrivers/base/dmapool.c
+<!-- Cannot be included, because
+     attribute_container_add_class_device_adapter
+ and attribute_container_classdev_to_container
+     exceed allowed 44 characters maximum
+X!Edrivers/base/attribute_container.c
+-->
+!Edrivers/base/sys.c
+<!--
+X!Edrivers/base/interface.c
+-->
+!Edrivers/base/platform.c
+!Edrivers/base/bus.c
+     </sect1>
+     <sect1><title>Device Drivers Power Management</title>
+!Edrivers/base/power/main.c
+!Edrivers/base/power/resume.c
+!Edrivers/base/power/suspend.c
+     </sect1>
+     <sect1><title>Device Drivers ACPI Support</title>
+<!-- Internal functions only
+X!Edrivers/acpi/sleep/main.c
+X!Edrivers/acpi/sleep/wakeup.c
+X!Edrivers/acpi/motherboard.c
+X!Edrivers/acpi/bus.c
+-->
+!Edrivers/acpi/scan.c
+<!-- No correct structured comments
+X!Edrivers/acpi/pci_bind.c
+-->
+     </sect1>
+     <sect1><title>Device drivers PnP support</title>
+!Edrivers/pnp/core.c
+<!-- No correct structured comments
+X!Edrivers/pnp/system.c
+ -->
+!Edrivers/pnp/card.c
+!Edrivers/pnp/driver.c
+!Edrivers/pnp/manager.c
+!Edrivers/pnp/support.c
+     </sect1>
+  </chapter>
+
+
   <chapter id="blkdev">
      <title>Block Devices</title>
 !Edrivers/block/ll_rw_blk.c
@@ -250,7 +403,23 @@ X!Earch/i386/kernel/mca.c
 
   <chapter id="snddev">
      <title>Sound Devices</title>
+!Iinclude/sound/core.h
 !Esound/sound_core.c
+!Iinclude/sound/pcm.h
+!Esound/core/pcm.c
+!Esound/core/device.c
+!Esound/core/info.c
+!Esound/core/rawmidi.c
+!Esound/core/sound.c
+!Esound/core/memory.c
+!Esound/core/pcm_memory.c
+!Esound/core/init.c
+!Esound/core/isadma.c
+!Esound/core/control.c
+!Esound/core/pcm_lib.c
+!Esound/core/hwdep.c
+!Esound/core/pcm_native.c
+!Esound/core/memalloc.c
 <!-- FIXME: Removed for now since no structured comments in source
 X!Isound/sound_firmware.c
 -->
@@ -258,6 +427,7 @@ X!Isound/sound_firmware.c
 
   <chapter id="uart16x50">
      <title>16x50 UART Driver</title>
+!Iinclude/linux/serial_core.h
 !Edrivers/serial/serial_core.c
 !Edrivers/serial/8250.c
   </chapter>
@@ -310,9 +480,11 @@ X!Isound/sound_firmware.c
      <sect1><title>Frame Buffer Memory</title>
 !Edrivers/video/fbmem.c
      </sect1>
+<!--
      <sect1><title>Frame Buffer Console</title>
-!Edrivers/video/console/fbcon.c
+X!Edrivers/video/console/fbcon.c
      </sect1>
+-->
      <sect1><title>Frame Buffer Colormap</title>
 !Edrivers/video/fbcmap.c
      </sect1>
diff --git a/Documentation/DocBook/stylesheet.xsl b/Documentation/DocBook/stylesheet.xsl
new file mode 100644
index 00000000000..e14c21dda40
--- /dev/null
+++ b/Documentation/DocBook/stylesheet.xsl
@@ -0,0 +1,5 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<stylesheet xmlns="http://www.w3.org/1999/XSL/Transform" version="1.0">
+<param name="chunk.quietly">1</param>
+<param name="funcsynopsis.style">ansi</param>
+</stylesheet>
diff --git a/Documentation/DocBook/tulip-user.tmpl b/Documentation/DocBook/tulip-user.tmpl
deleted file mode 100644
index 6520d7a1b13..00000000000
--- a/Documentation/DocBook/tulip-user.tmpl
+++ /dev/null
@@ -1,327 +0,0 @@
-<?xml version="1.0" encoding="UTF-8"?>
-<!DOCTYPE book PUBLIC "-//OASIS//DTD DocBook XML V4.1.2//EN"
-	"http://www.oasis-open.org/docbook/xml/4.1.2/docbookx.dtd" []>
-
-<book id="TulipUserGuide">
- <bookinfo>
-  <title>Tulip Driver User's Guide</title>
-  
-  <authorgroup>
-   <author>
-    <firstname>Jeff</firstname>
-    <surname>Garzik</surname>
-    <affiliation>
-     <address>
-      <email>jgarzik@pobox.com</email>
-     </address>
-    </affiliation>
-   </author>
-  </authorgroup>
-
-  <copyright>
-   <year>2001</year>
-   <holder>Jeff Garzik</holder>
-  </copyright>
-
-  <legalnotice>
-   <para>
-     This documentation is free software; you can redistribute
-     it and/or modify it under the terms of the GNU General Public
-     License as published by the Free Software Foundation; either
-     version 2 of the License, or (at your option) any later
-     version.
-   </para>
-      
-   <para>
-     This program is distributed in the hope that it will be
-     useful, but WITHOUT ANY WARRANTY; without even the implied
-     warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-     See the GNU General Public License for more details.
-   </para>
-      
-   <para>
-     You should have received a copy of the GNU General Public
-     License along with this program; if not, write to the Free
-     Software Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-     MA 02111-1307 USA
-   </para>
-      
-   <para>
-     For more details see the file COPYING in the source
-     distribution of Linux.
-   </para>
-  </legalnotice>
- </bookinfo>
-
- <toc></toc>
-
-  <chapter id="intro">
-    <title>Introduction</title>
-<para>
-The Tulip Ethernet Card Driver
-is maintained by Jeff Garzik (<email>jgarzik@pobox.com</email>).
-</para>
-
-<para>
-The Tulip driver was developed by Donald Becker and changed by
-Jeff Garzik, Takashi Manabe and a cast of thousands.
-</para>
-
-<para>
-For 2.4.x and later kernels, the Linux Tulip driver is available at
-<ulink url="http://sourceforge.net/projects/tulip/">http://sourceforge.net/projects/tulip/</ulink>
-</para>
-
-<para>
-	This driver is for the Digital "Tulip" Ethernet adapter interface.
-	It should work with most DEC 21*4*-based chips/ethercards, as well as
-	with work-alike chips from Lite-On (PNIC) and Macronix (MXIC) and ASIX.
-</para>
-
-<para>
-        The original author may be reached as becker@scyld.com, or C/O
-        Scyld Computing Corporation,
-        410 Severn Ave., Suite 210,
-        Annapolis MD 21403
-</para>
-
-<para>
-	Additional information on Donald Becker's tulip.c
-	is available at <ulink url="http://www.scyld.com/network/tulip.html">http://www.scyld.com/network/tulip.html</ulink>
-</para>
-
-  </chapter>
-
-  <chapter id="drvr-compat">
-    <title>Driver Compatibility</title>
-
-<para>
-This device driver is designed for the DECchip "Tulip", Digital's
-single-chip ethernet controllers for PCI (now owned by Intel).
-Supported members of the family
-are the 21040, 21041, 21140, 21140A, 21142, and 21143.  Similar work-alike
-chips from Lite-On, Macronics, ASIX, Compex and other listed below are also
-supported.
-</para>
-
-<para>
-These chips are used on at least 140 unique PCI board designs.  The great
-number of chips and board designs supported is the reason for the
-driver size and complexity.  Almost of the increasing complexity is in the
-board configuration and media selection code.  There is very little
-increasing in the operational critical path length.
-</para>
-  </chapter>
-
-  <chapter id="board-settings">
-    <title>Board-specific Settings</title>
-
-<para>
-PCI bus devices are configured by the system at boot time, so no jumpers
-need to be set on the board.  The system BIOS preferably should assign the
-PCI INTA signal to an otherwise unused system IRQ line.
-</para>
-
-<para>
-Some boards have EEPROMs tables with default media entry.  The factory default
-is usually "autoselect".  This should only be overridden when using
-transceiver connections without link beat e.g. 10base2 or AUI, or (rarely!)
-for forcing full-duplex when used with old link partners that do not do
-autonegotiation.
-</para>
-  </chapter>
-
-  <chapter id="driver-operation">
-    <title>Driver Operation</title>
-
-<sect1><title>Ring buffers</title>
-
-<para>
-The Tulip can use either ring buffers or lists of Tx and Rx descriptors.
-This driver uses statically allocated rings of Rx and Tx descriptors, set at
-compile time by RX/TX_RING_SIZE.  This version of the driver allocates skbuffs
-for the Rx ring buffers at open() time and passes the skb->data field to the
-Tulip as receive data buffers.  When an incoming frame is less than
-RX_COPYBREAK bytes long, a fresh skbuff is allocated and the frame is
-copied to the new skbuff.  When the incoming frame is larger, the skbuff is
-passed directly up the protocol stack and replaced by a newly allocated
-skbuff.
-</para>
-
-<para>
-The RX_COPYBREAK value is chosen to trade-off the memory wasted by
-using a full-sized skbuff for small frames vs. the copying costs of larger
-frames.  For small frames the copying cost is negligible (esp. considering
-that we are pre-loading the cache with immediately useful header
-information).  For large frames the copying cost is non-trivial, and the
-larger copy might flush the cache of useful data.  A subtle aspect of this
-choice is that the Tulip only receives into longword aligned buffers, thus
-the IP header at offset 14 isn't longword aligned for further processing.
-Copied frames are put into the new skbuff at an offset of "+2", thus copying
-has the beneficial effect of aligning the IP header and preloading the
-cache.
-</para>
-
-</sect1>
-
-<sect1><title>Synchronization</title>
-<para>
-The driver runs as two independent, single-threaded flows of control.  One
-is the send-packet routine, which enforces single-threaded use by the
-dev->tbusy flag.  The other thread is the interrupt handler, which is single
-threaded by the hardware and other software.
-</para>
-
-<para>
-The send packet thread has partial control over the Tx ring and 'dev->tbusy'
-flag.  It sets the tbusy flag whenever it's queuing a Tx packet. If the next
-queue slot is empty, it clears the tbusy flag when finished otherwise it sets
-the 'tp->tx_full' flag.
-</para>
-
-<para>
-The interrupt handler has exclusive control over the Rx ring and records stats
-from the Tx ring.  (The Tx-done interrupt can't be selectively turned off, so
-we can't avoid the interrupt overhead by having the Tx routine reap the Tx
-stats.)	 After reaping the stats, it marks the queue entry as empty by setting
-the 'base' to zero.	 Iff the 'tp->tx_full' flag is set, it clears both the
-tx_full and tbusy flags.
-</para>
-
-</sect1>
-
-  </chapter>
-
-  <chapter id="errata">
-    <title>Errata</title>
-
-<para>
-The old DEC databooks were light on details.
-The 21040 databook claims that CSR13, CSR14, and CSR15 should each be the last
-register of the set CSR12-15 written.  Hmmm, now how is that possible?
-</para>
-
-<para>
-The DEC SROM format is very badly designed not precisely defined, leading to
-part of the media selection junkheap below.  Some boards do not have EEPROM
-media tables and need to be patched up.  Worse, other boards use the DEC
-design kit media table when it isn't correct for their board.
-</para>
-
-<para>
-We cannot use MII interrupts because there is no defined GPIO pin to attach
-them.  The MII transceiver status is polled using an kernel timer.
-</para>
-  </chapter>
-
-  <chapter id="changelog">
-    <title>Driver Change History</title>
-
-    <sect1><title>Version 0.9.14 (February 20, 2001)</title>
-    <itemizedlist>
-    <listitem><para>Fix PNIC problems (Manfred Spraul)</para></listitem>
-    <listitem><para>Add new PCI id for Accton comet</para></listitem>
-    <listitem><para>Support Davicom tulips</para></listitem>
-    <listitem><para>Fix oops in eeprom parsing</para></listitem>
-    <listitem><para>Enable workarounds for early PCI chipsets</para></listitem>
-    <listitem><para>IA64, hppa csr0 support</para></listitem>
-    <listitem><para>Support media types 5, 6</para></listitem>
-    <listitem><para>Interpret a bit more of the 21142 SROM extended media type 3</para></listitem>
-    <listitem><para>Add missing delay in eeprom reading</para></listitem>
-    </itemizedlist>
-    </sect1>
-
-    <sect1><title>Version 0.9.11 (November 3, 2000)</title>
-    <itemizedlist>
-    <listitem><para>Eliminate extra bus accesses when sharing interrupts (prumpf)</para></listitem>
-    <listitem><para>Barrier following ownership descriptor bit flip (prumpf)</para></listitem>
-    <listitem><para>Endianness fixes for >14 addresses in setup frames (prumpf)</para></listitem>
-    <listitem><para>Report link beat to kernel/userspace via netif_carrier_*. (kuznet)</para></listitem>
-    <listitem><para>Better spinlocking in set_rx_mode.</para></listitem>
-    <listitem><para>Fix I/O resource request failure error messages (DaveM catch)</para></listitem>
-    <listitem><para>Handle DMA allocation failure.</para></listitem>
-    </itemizedlist>
-    </sect1>
-
-    <sect1><title>Version 0.9.10 (September 6, 2000)</title>
-    <itemizedlist>
-    <listitem><para>Simple interrupt mitigation (via jamal)</para></listitem>
-    <listitem><para>More PCI ids</para></listitem>
-    </itemizedlist>
-    </sect1>
-
-    <sect1><title>Version 0.9.9 (August 11, 2000)</title>
-    <itemizedlist>
-    <listitem><para>More PCI ids</para></listitem>
-    </itemizedlist>
-    </sect1>
-
-    <sect1><title>Version 0.9.8 (July 13, 2000)</title>
-    <itemizedlist>
-    <listitem><para>Correct signed/unsigned comparison for dummy frame index</para></listitem>
-    <listitem><para>Remove outdated references to struct enet_statistics</para></listitem>
-    </itemizedlist>
-    </sect1>
-
-    <sect1><title>Version 0.9.7 (June 17, 2000)</title>
-    <itemizedlist>
-    <listitem><para>Timer cleanups (Andrew Morton)</para></listitem>
-    <listitem><para>Alpha compile fix (somebody?)</para></listitem>
-    </itemizedlist>
-    </sect1>
-
-    <sect1><title>Version 0.9.6 (May 31, 2000)</title>
-    <itemizedlist>
-    <listitem><para>Revert 21143-related support flag patch</para></listitem>
-    <listitem><para>Add HPPA/media-table debugging printk</para></listitem>
-    </itemizedlist>
-    </sect1>
-
-    <sect1><title>Version 0.9.5 (May 30, 2000)</title>
-    <itemizedlist>
-    <listitem><para>HPPA support (willy@puffingroup)</para></listitem>
-    <listitem><para>CSR6 bits and tulip.h cleanup (Chris Smith)</para></listitem>
-    <listitem><para>Improve debugging messages a bit</para></listitem>
-    <listitem><para>Add delay after CSR13 write in t21142_start_nway</para></listitem>
-    <listitem><para>Remove unused ETHER_STATS code</para></listitem>
-    <listitem><para>Convert 'extern inline' to 'static inline' in tulip.h (Chris Smith)</para></listitem>
-    <listitem><para>Update DS21143 support flags in tulip_chip_info[]</para></listitem>
-    <listitem><para>Use spin_lock_irq, not _irqsave/restore, in tulip_start_xmit()</para></listitem>
-    <listitem><para>Add locking to set_rx_mode()</para></listitem>
-    <listitem><para>Fix race with chip setting DescOwned bit (Hal Murray)</para></listitem>
-    <listitem><para>Request 100% of PIO and MMIO resource space assigned to card</para></listitem>
-    <listitem><para>Remove error message from pci_enable_device failure</para></listitem>
-    </itemizedlist>
-    </sect1>
-
-    <sect1><title>Version 0.9.4.3 (April 14, 2000)</title>
-    <itemizedlist>
-    <listitem><para>mod_timer fix (Hal Murray)</para></listitem>
-    <listitem><para>PNIC2 resuscitation (Chris Smith)</para></listitem>
-    </itemizedlist>
-    </sect1>
-
-    <sect1><title>Version 0.9.4.2 (March 21, 2000)</title>
-    <itemizedlist>
-    <listitem><para>Fix 21041 CSR7, CSR13/14/15 handling</para></listitem>
-    <listitem><para>Merge some PCI ids from tulip 0.91x</para></listitem>
-    <listitem><para>Merge some HAS_xxx flags and flag settings from tulip 0.91x</para></listitem>
-    <listitem><para>asm/io.h fix (submitted by many) and cleanup</para></listitem>
-    <listitem><para>s/HAS_NWAY143/HAS_NWAY/</para></listitem>
-    <listitem><para>Cleanup 21041 mode reporting</para></listitem>
-    <listitem><para>Small code cleanups</para></listitem>
-    </itemizedlist>
-    </sect1>
-
-    <sect1><title>Version 0.9.4.1 (March 18, 2000)</title>
-    <itemizedlist>
-    <listitem><para>Finish PCI DMA conversion (davem)</para></listitem>
-    <listitem><para>Do not netif_start_queue() at end of tulip_tx_timeout() (kuznet)</para></listitem>
-    <listitem><para>PCI DMA fix (kuznet)</para></listitem>
-    <listitem><para>eeprom.c code cleanup</para></listitem>
-    <listitem><para>Remove Xircom Tulip crud</para></listitem>
-    </itemizedlist>
-    </sect1>
-  </chapter>
-
-</book>
diff --git a/Documentation/DocBook/via-audio.tmpl b/Documentation/DocBook/via-audio.tmpl
deleted file mode 100644
index 36e642147d6..00000000000
--- a/Documentation/DocBook/via-audio.tmpl
+++ /dev/null
@@ -1,597 +0,0 @@
-<?xml version="1.0" encoding="UTF-8"?>
-<!DOCTYPE book PUBLIC "-//OASIS//DTD DocBook XML V4.1.2//EN"
-	"http://www.oasis-open.org/docbook/xml/4.1.2/docbookx.dtd" []>
-
-<book id="ViaAudioGuide">
- <bookinfo>
-  <title>Via 686 Audio Driver for Linux</title>
-  
-  <authorgroup>
-   <author>
-    <firstname>Jeff</firstname>
-    <surname>Garzik</surname>
-   </author>
-  </authorgroup>
-
-  <copyright>
-   <year>1999-2001</year>
-   <holder>Jeff Garzik</holder>
-  </copyright>
-
-  <legalnotice>
-   <para>
-     This documentation is free software; you can redistribute
-     it and/or modify it under the terms of the GNU General Public
-     License as published by the Free Software Foundation; either
-     version 2 of the License, or (at your option) any later
-     version.
-   </para>
-      
-   <para>
-     This program is distributed in the hope that it will be
-     useful, but WITHOUT ANY WARRANTY; without even the implied
-     warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-     See the GNU General Public License for more details.
-   </para>
-      
-   <para>
-     You should have received a copy of the GNU General Public
-     License along with this program; if not, write to the Free
-     Software Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-     MA 02111-1307 USA
-   </para>
-      
-   <para>
-     For more details see the file COPYING in the source
-     distribution of Linux.
-   </para>
-  </legalnotice>
- </bookinfo>
-
-<toc></toc>
-
-  <chapter id="intro">
-      <title>Introduction</title>
-  <para>
-  	The Via VT82C686A "super southbridge" chips contain
-	AC97-compatible audio logic which features dual 16-bit stereo
-	PCM sound channels (full duplex), plus a third PCM channel intended for use
-	in hardware-assisted FM synthesis.
-  </para>
-  <para>
-  	The current Linux kernel audio driver for this family of chips
-	supports audio playback and recording, but hardware-assisted
-	FM features, and hardware buffer direct-access (mmap)
-	support are not yet available.
-  </para>
-  <para>
-  	This driver supports any Linux kernel version after 2.4.10.
-  </para>
-  <para>
-	Please send bug reports to the mailing list <email>linux-via@gtf.org</email>.
-	To subscribe, e-mail <email>majordomo@gtf.org</email> with
-  </para>
-  <programlisting>
-	subscribe linux-via
-  </programlisting>
-  <para>
-	in the body of the message.
-  </para>
-  </chapter>
-  
-  <chapter id="install">
-      <title>Driver Installation</title>
-  <para>
-  	To use this audio driver, select the
-	CONFIG_SOUND_VIA82CXXX option in the section Sound during kernel configuration.
-	Follow the usual kernel procedures for rebuilding the kernel,
-	or building and installing driver modules.
-  </para>
-  <para>
-  	To make this driver the default audio driver, you can add the
-	following to your /etc/conf.modules file:
-  </para>
-  <programlisting>
-	alias sound via82cxxx_audio
-  </programlisting>
-  <para>
-  	Note that soundcore and ac97_codec support modules
-	are also required for working audio, in addition to
-	the via82cxxx_audio module itself.
-  </para>
-  </chapter>
-  
-  <chapter id="reportbug">
-      <title>Submitting a bug report</title>
-  <sect1 id="bugrepdesc"><title>Description of problem</title>
-  <para>
-	Describe the application you were using to play/record sound, and how
-	to reproduce the problem.
-  </para>
-  </sect1>
-  <sect1 id="bugrepdiag"><title>Diagnostic output</title>
-  <para>
-	Obtain the via-audio-diag diagnostics program from
-	http://sf.net/projects/gkernel/ and provide a dump of the
-	audio chip's registers while the problem is occurring.  Sample command line:
-  </para>
-  <programlisting>
-	./via-audio-diag -aps > diag-output.txt
-  </programlisting>
-  </sect1>
-  <sect1 id="bugrepdebug"><title>Driver debug output</title>
-  <para>
-	Define <constant>VIA_DEBUG</constant> at the beginning of the driver, then capture and email
-	the kernel log output.  This can be viewed in the system kernel log (if
-	enabled), or via the dmesg program.  Sample command line:
-  </para>
-  <programlisting>
-	dmesg > /tmp/dmesg-output.txt
-  </programlisting>
-  </sect1>
-  <sect1 id="bugrepprintk"><title>Bigger kernel message buffer</title>
-  <para>
-	If you wish to increase the size of the buffer displayed by dmesg, then
-	change the <constant>LOG_BUF_LEN</constant> macro at the top of linux/kernel/printk.c, recompile
-	your kernel, and pass the <constant>LOG_BUF_LEN</constant> value to dmesg.  Sample command line with
-	<constant>LOG_BUF_LEN</constant> == 32768:
-  </para>
-  <programlisting>
-	dmesg -s 32768 > /tmp/dmesg-output.txt
-  </programlisting>
-  </sect1>
-  </chapter>
-  
-  <chapter id="bugs">
-     <title>Known Bugs And Assumptions</title>
-  <para>
-  <variablelist>
-    <varlistentry><term>Low volume</term>
-    <listitem>
-    <para>
-	Volume too low on many systems.  Workaround:  use mixer program
-	such as xmixer to increase volume.
-    </para>
-    </listitem></varlistentry>
-
-  </variablelist>
-	
-  </para>
-  </chapter>
-
-  <chapter id="thanks">
-      <title>Thanks</title>
-  <para>
-	Via for providing e-mail support, specs, and NDA'd source code.
-  </para>
-  <para>
-	MandrakeSoft for providing hacking time.
-  </para>
-  <para>
-	AC97 mixer interface fixes and debugging by Ron Cemer <email>roncemer@gte.net</email>.
-  </para>
-  <para>
-	Rui Sousa <email>rui.sousa@conexant.com</email>, for bugfixing
-	MMAP support, and several other notable fixes that resulted from
-	his hard work and testing.
-  </para>
-  <para>
-	Adrian Cox <email>adrian@humboldt.co.uk</email>, for bugfixing
-	MMAP support, and several other notable fixes that resulted from
-	his hard work and testing.
-  </para>
-  <para>
-  	Thomas Sailer for further bugfixes.
-  </para>
-  </chapter>
-  
-  <chapter id="notes">
-     <title>Random Notes</title>
-  <para>
-	Two /proc pseudo-files provide diagnostic information.  This is generally
-	not useful to most users.  Power users can disable CONFIG_SOUND_VIA82CXXX_PROCFS,
-	and remove the /proc support code.  Once
-	version 2.0.0 is released, the /proc support code will be disabled by
-	default.  Available /proc pseudo-files:
-  </para>
-  <programlisting>
-	/proc/driver/via/0/info
-	/proc/driver/via/0/ac97
-  </programlisting>
-  <para>
-	This driver by default supports all PCI audio devices which report
-	a vendor id of 0x1106, and a device id of 0x3058.  Subsystem vendor
-	and device ids are not examined.
-  </para>
-  <para>
-	GNU indent formatting options:
-  <programlisting>
--kr -i8 -ts8 -br -ce -bap -sob -l80 -pcs -cs -ss -bs -di1 -nbc -lp -psl
-  </programlisting>
-  </para>
-  <para>
-	Via has graciously donated e-mail support and source code to help further
-	the development of this driver.  Their assistance has been invaluable
-	in the design and coding of the next major version of this driver.
-  </para>
-  <para>
-	The Via audio chip apparently provides a second PCM scatter-gather
-	DMA channel just for FM data, but does not have a full hardware MIDI
-	processor.  I haven't put much thought towards a solution here, but it
-	might involve using SoftOSS midi wave table, or simply disabling MIDI
-	support altogether and using the FM PCM channel as a second (input? output?)
-  </para>
-  </chapter>
-
-  <chapter id="changelog">
-      <title>Driver ChangeLog</title>
-
-<sect1 id="version191"><title>
-Version 1.9.1
-</title>
-  <itemizedlist spacing="compact">
-   <listitem>
-    <para>
-    DSP read/write bugfixes from Thomas Sailer.
-    </para>
-   </listitem>
-
-   <listitem>
-    <para>
-    Add new PCI id for single-channel use of Via 8233.
-    </para>
-   </listitem>
-
-   <listitem>
-    <para>
-    Other bug fixes, tweaks, new ioctls.
-    </para>
-   </listitem>
-
-  </itemizedlist>
-</sect1>
-
-<sect1 id="version1115"><title>
-Version 1.1.15
-</title>
-  <itemizedlist spacing="compact">
-   <listitem>
-    <para>
-    Support for variable fragment size and variable fragment number (Rui
-    Sousa)
-    </para>
-   </listitem>
-
-   <listitem>
-    <para>
-    Fixes for the SPEED, STEREO, CHANNELS, FMT ioctls when in read &amp;
-    write mode (Rui Sousa)
-    </para>
-   </listitem>
-
-   <listitem>
-    <para>
-    Mmaped sound is now fully functional. (Rui Sousa)
-    </para>
-   </listitem>
-
-   <listitem>
-    <para>
-    Make sure to enable PCI device before reading any of its PCI
-    config information. (fixes potential hotplug problems)
-    </para>
-   </listitem>
-
-   <listitem>
-    <para>
-    Clean up code a bit and add more internal function documentation.
-    </para>
-   </listitem>
-
-   <listitem>
-    <para>
-    AC97 codec access fixes (Adrian Cox)
-    </para>
-   </listitem>
-
-   <listitem>
-    <para>
-    Big endian fixes (Adrian Cox)
-    </para>
-   </listitem>
-
-   <listitem>
-    <para>
-    MIDI support (Adrian Cox)
-    </para>
-   </listitem>
-
-   <listitem>
-    <para>
-    Detect and report locked-rate AC97 codecs.  If your hardware only
-    supports 48Khz (locked rate), then your recording/playback software
-    must upsample or downsample accordingly.  The hardware cannot do it.
-    </para>
-   </listitem>
-
-   <listitem>
-    <para>
-    Use new pci_request_regions and pci_disable_device functions in
-    kernel 2.4.6.
-    </para>
-   </listitem>
-
-  </itemizedlist>
-</sect1>
-
-<sect1 id="version1114"><title>
-Version 1.1.14
-</title>
-  <itemizedlist spacing="compact">
-   <listitem>
-    <para>
-    Use VM_RESERVE when available, to eliminate unnecessary page faults.
-    </para>
-   </listitem>
-  </itemizedlist>
-</sect1>
-
-<sect1 id="version1112"><title>
-Version 1.1.12
-</title>
-  <itemizedlist spacing="compact">
-   <listitem>
-    <para>
-    mmap bug fixes from Linus.
-    </para>
-   </listitem>
-  </itemizedlist>
-</sect1>
-
-<sect1 id="version1111"><title>
-Version 1.1.11
-</title>
-  <itemizedlist spacing="compact">
-   <listitem>
-    <para>
-    Many more bug fixes.  mmap enabled by default, but may still be buggy.
-    </para>
-   </listitem>
-
-   <listitem>
-    <para>
-    Uses new and spiffy method of mmap'ing the DMA buffer, based
-    on a suggestion from Linus.
-    </para>
-   </listitem>
-  </itemizedlist>
-</sect1>
-
-<sect1 id="version1110"><title>
-Version 1.1.10
-</title>
-  <itemizedlist spacing="compact">
-   <listitem>
-    <para>
-    Many bug fixes.  mmap enabled by default, but may still be buggy.
-    </para>
-   </listitem>
-  </itemizedlist>
-</sect1>
-
-<sect1 id="version119"><title>
-Version 1.1.9
-</title>
-  <itemizedlist spacing="compact">
-   <listitem>
-    <para>
-    Redesign and rewrite audio playback implementation.  (faster and smaller, hopefully)
-    </para>
-   </listitem>
-
-   <listitem>
-    <para>
-    Implement recording and full duplex (DSP_CAP_DUPLEX) support.
-    </para>
-   </listitem>
-
-   <listitem>
-    <para>
-    Make procfs support optional.
-    </para>
-   </listitem>
-
-   <listitem>
-    <para>
-    Quick interrupt status check, to lessen overhead in interrupt
-    sharing situations.
-    </para>
-   </listitem>
-
-   <listitem>
-    <para>
-    Add mmap(2) support.  Disabled for now, it is still buggy and experimental.
-    </para>
-   </listitem>
-
-   <listitem>
-    <para>
-    Surround all syscalls with a semaphore for cheap and easy SMP protection.
-    </para>
-   </listitem>
-
-   <listitem>
-    <para>
-    Fix bug in channel shutdown (hardware channel reset) code.
-    </para>
-   </listitem>
-
-   <listitem>
-    <para>
-    Remove unnecessary spinlocks (better performance).
-    </para>
-   </listitem>
-
-   <listitem>
-    <para>
-    Eliminate "unknown AFMT" message by using a different method
-    of selecting the best AFMT_xxx sound sample format for use.
-    </para>
-   </listitem>
-
-   <listitem>
-    <para>
-    Support for realtime hardware pointer position reporting
-    (DSP_CAP_REALTIME, SNDCTL_DSP_GETxPTR ioctls)
-    </para>
-   </listitem>
-
-   <listitem>
-    <para>
-    Support for capture/playback triggering
-    (DSP_CAP_TRIGGER, SNDCTL_DSP_SETTRIGGER ioctls)
-    </para>
-   </listitem>
-
-   <listitem>
-    <para>
-    SNDCTL_DSP_SETDUPLEX and SNDCTL_DSP_POST ioctls now handled.
-    </para>
-   </listitem>
-
-   <listitem>
-    <para>
-    Rewrite open(2) and close(2) logic to allow only one user at
-    a time.  All other open(2) attempts will sleep until they succeed.
-    FIXME: open(O_RDONLY) and open(O_WRONLY) should be allowed to succeed.
-    </para>
-   </listitem>
-
-   <listitem>
-    <para>
-    Reviewed code to ensure that SMP and multiple audio devices
-    are fully supported.
-    </para>
-   </listitem>
-
-  </itemizedlist>
-</sect1>
-
-<sect1 id="version118"><title>
-Version 1.1.8
-</title>
-  <itemizedlist spacing="compact">
-   <listitem>
-    <para>
-    	Clean up interrupt handler output.  Fixes the following kernel error message:
-    </para>
-  	<programlisting>
-	unhandled interrupt ...
-  	</programlisting>
-   </listitem>
-
-   <listitem>
-    <para>
-    	Convert documentation to DocBook, so that PDF, HTML and PostScript (.ps) output is readily
-	available.
-    </para>
-   </listitem>
-
-  </itemizedlist>
-</sect1>
-
-<sect1 id="version117"><title>
-Version 1.1.7
-</title>
-  <itemizedlist spacing="compact">
-   <listitem>
-    <para>
- Fix module unload bug where mixer device left registered
-  after driver exit
-    </para>
-   </listitem>
-  </itemizedlist>
-</sect1>
-
-<sect1 id="version116"><title>
-Version 1.1.6
-</title>
-  <itemizedlist spacing="compact">
-   <listitem>
-    <para>
- Rewrite via_set_rate to mimic ALSA basic AC97 rate setting
-    </para>
-   </listitem>
-   <listitem>
-    <para>
- Remove much dead code
-    </para>
-   </listitem>
-   <listitem>
-    <para>
- Complete spin_lock_irqsave -> spin_lock_irq conversion in via_dsp_ioctl
-    </para>
-   </listitem>
-   <listitem>
-    <para>
- Fix build problem in via_dsp_ioctl
-    </para>
-   </listitem>
-   <listitem>
-    <para>
- Optimize included headers to eliminate headers found in linux/sound
-	</para>
-   </listitem>
-  </itemizedlist>
-</sect1>
-
-<sect1 id="version115"><title>
-Version 1.1.5
-</title>
-  <itemizedlist spacing="compact">
-   <listitem>
-    <para>
- Disable some overly-verbose debugging code
-    </para>
-   </listitem>
-   <listitem>
-    <para>
- Remove unnecessary sound locks
-   </para>
-   </listitem>
-   <listitem>
-    <para>
- Fix some ioctls for better time resolution
-    </para>
-   </listitem>
-   <listitem>
-    <para>
- Begin spin_lock_irqsave -> spin_lock_irq conversion in via_dsp_ioctl
-    </para>
-   </listitem>
-  </itemizedlist>
-</sect1>
-
-<sect1 id="version114"><title>
-Version 1.1.4
-</title>
-  <itemizedlist spacing="compact">
-   <listitem>
-    <para>
- Completed rewrite of driver.  Eliminated SoundBlaster compatibility
-  completely, and now uses the much-faster scatter-gather DMA engine.
-    </para>
-   </listitem>
-  </itemizedlist>
-</sect1>
-
-  </chapter>
-  
-  <chapter id="intfunctions">
-     <title>Internal Functions</title>
-!Isound/oss/via82cxxx_audio.c
-  </chapter>
-
-</book>
-
-