Merge branch 'for-3.12' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata

Pull libata changes from Tejun Heo:
 "Two interesting changes.

   - libata acpi handling has been restructured so that the association
     between ata devices and ACPI handles are less convoluted.  This
     change shouldn't change visible behavior.

   - Queued TRIM support, which enables sending TRIM to the device
     without draining in-flight RW commands, is added.  Currently only
     enabled for ahci (and likely to stay that way for the foreseeable
     future).

  Other changes are driver-specific updates / fixes"

* 'for-3.12' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata:
  libata: bugfix: Remove __le32 in ata_tf_to_fis()
  libata: acpi: Remove ata_dev_acpi_handle stub in libata.h
  libata: Add support for queued DSM TRIM
  libata: Add support for SEND/RECEIVE FPDMA QUEUED
  libata: Add H2D FIS "auxiliary" port flag
  libata: Populate host-to-device FIS "auxiliary" field
  ata: acpi: rework the ata acpi bind support
  sata, highbank: send extra clock cycles in SGPIO patterns
  sata, highbank: set tx_atten override bits
  devicetree: create a separate binding description for sata_highbank
  drivers/ata/sata_rcar.c: simplify use of devm_ioremap_resource
  sata highbank: enable 64-bit DMA mask when using LPAE
  ata: pata_samsung_cf: add missing __iomem annotation
  ata: pata_arasan: Staticize local symbols
  sata_mv: Remove unneeded CONFIG_HAVE_CLK ifdefs
  ata: use dev_get_platdata()
  sata_mv: Remove unneeded forward declaration
  libata: acpi: remove dead code for ata_acpi_(un)bind
  libata: move 'struct ata_taskfile' and friends from ata.h to libata.h

1 files changed, 4 insertions, 14 deletions

diff --git a/Documentation/devicetree/bindings/ata/ahci-platform.txt b/Documentation/devicetree/bindings/ata/ahci-platform.txt
index 3ec0c5c4f0e..89de1564950 100644
--- a/Documentation/devicetree/bindings/ata/ahci-platform.txt
+++ b/Documentation/devicetree/bindings/ata/ahci-platform.txt
@@ -4,27 +4,17 @@ SATA nodes are defined to describe on-chip Serial ATA controllers.
 Each SATA controller should have its own node.
 
 Required properties:
-- compatible        : compatible list, contains "calxeda,hb-ahci" or "snps,spear-ahci"
+- compatible        : compatible list, contains "snps,spear-ahci"
 - interrupts        : <interrupt mapping for SATA IRQ>
 - reg               : <registers mapping>
 
 Optional properties:
-- calxeda,port-phys: phandle-combophy and lane assignment, which maps each
-			SATA port to a combophy and a lane within that
-			combophy
-- calxeda,sgpio-gpio: phandle-gpio bank, bit offset, and default on or off,
-			which indicates that the driver supports SGPIO
-			indicator lights using the indicated GPIOs
-- calxeda,led-order : a u32 array that map port numbers to offsets within the
-			SGPIO bitstream.
 - dma-coherent      : Present if dma operations are coherent
 
 Example:
         sata@ffe08000 {
-		compatible = "calxeda,hb-ahci";
-                reg = <0xffe08000 0x1000>;
-                interrupts = <115>;
-		calxeda,port-phys = <&combophy5 0 &combophy0 0 &combophy0 1
-					&combophy0 2 &combophy0 3>;
+		compatible = "snps,spear-ahci";
+		reg = <0xffe08000 0x1000>;
+		interrupts = <115>;
 
         };