Merge branch 'clk-rockchip' of git://git.linaro.org/people/mike.turquette/linux into next/soc

This is a dependency for the rk3288 DT updates, the branch should
first get merged through Mike's clk git.

* 'clk-rockchip' of git://git.linaro.org/people/mike.turquette/linux:
  ARM: rockchip: Select ARCH_HAS_RESET_CONTROLLER
  clk: rockchip: add clock controller for rk3288
  dt-bindings: add documentation for rk3288 cru
  clk: rockchip: add clock driver for rk3188 and rk3066 clocks
  dt-bindings: add documentation for rk3188 clock and reset unit
  clk: rockchip: add reset controller
  clk: rockchip: add clock type for pll clocks and pll used on rk3066
  clk: rockchip: add basic infrastructure for clock branches
  clk: composite: improve rate_hw sanity check logic
  clk: composite: allow read-only clocks
  clk: composite: support determine_rate using rate_ops->round_rate + mux_ops->set_parent

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

1 files changed, 61 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/clock/rockchip,rk3288-cru.txt b/Documentation/devicetree/bindings/clock/rockchip,rk3288-cru.txt
new file mode 100644
index 00000000000..c9fbb76573e
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/rockchip,rk3288-cru.txt
@@ -0,0 +1,61 @@
+* Rockchip RK3288 Clock and Reset Unit
+
+The RK3288 clock controller generates and supplies clock to various
+controllers within the SoC and also implements a reset controller for SoC
+peripherals.
+
+Required Properties:
+
+- compatible: should be "rockchip,rk3288-cru"
+- reg: physical base address of the controller and length of memory mapped
+  region.
+- #clock-cells: should be 1.
+- #reset-cells: should be 1.
+
+Optional Properties:
+
+- rockchip,grf: phandle to the syscon managing the "general register files"
+  If missing pll rates are not changable, due to the missing pll lock status.
+
+Each clock is assigned an identifier and client nodes can use this identifier
+to specify the clock which they consume. All available clocks are defined as
+preprocessor macros in the dt-bindings/clock/rk3288-cru.h headers and can be
+used in device tree sources. Similar macros exist for the reset sources in
+these files.
+
+External clocks:
+
+There are several clocks that are generated outside the SoC. It is expected
+that they are defined using standard clock bindings with following
+clock-output-names:
+ - "xin24m" - crystal input - required,
+ - "xin32k" - rtc clock - optional,
+ - "ext_i2s" - external I2S clock - optional,
+ - "ext_hsadc" - external HSADC clock - optional,
+ - "ext_edp_24m" - external display port clock - optional,
+ - "ext_vip" - external VIP clock - optional,
+ - "ext_isp" - external ISP clock - optional,
+ - "ext_jtag" - external JTAG clock - optional
+
+Example: Clock controller node:
+
+	cru: cru@20000000 {
+		compatible = "rockchip,rk3188-cru";
+		reg = <0x20000000 0x1000>;
+		rockchip,grf = <&grf>;
+
+		#clock-cells = <1>;
+		#reset-cells = <1>;
+	};
+
+Example: UART controller node that consumes the clock generated by the clock
+  controller:
+
+	uart0: serial@10124000 {
+		compatible = "snps,dw-apb-uart";
+		reg = <0x10124000 0x400>;
+		interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+		reg-shift = <2>;
+		reg-io-width = <1>;
+		clocks = <&cru SCLK_UART0>;
+	};