Merge to v3.13-rc7 for prerequisite changes in the Xen code for TPM

1 files changed, 36 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/gpio/abilis,tb10x-gpio.txt b/Documentation/devicetree/bindings/gpio/abilis,tb10x-gpio.txt
new file mode 100644
index 00000000000..00611aceed3
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/abilis,tb10x-gpio.txt
@@ -0,0 +1,36 @@
+* Abilis TB10x GPIO controller
+
+Required Properties:
+- compatible: Should be "abilis,tb10x-gpio"
+- reg: Address and length of the register set for the device
+- gpio-controller: Marks the device node as a gpio controller.
+- #gpio-cells: Should be <2>. The first cell is the pin number and the
+  second cell is used to specify optional parameters:
+   - bit 0 specifies polarity (0 for normal, 1 for inverted).
+- abilis,ngpio: the number of GPIO pins this driver controls.
+
+Optional Properties:
+- interrupt-controller: Marks the device node as an interrupt controller.
+- #interrupt-cells: Should be <1>. Interrupts are triggered on both edges.
+- interrupts: Defines the interrupt line connecting this GPIO controller to
+  its parent interrupt controller.
+- interrupt-parent: Defines the parent interrupt controller.
+
+GPIO ranges are specified as described in
+Documentation/devicetree/bindings/gpio/gpio.txt
+
+Example:
+
+	gpioa: gpio@FF140000 {
+		compatible = "abilis,tb10x-gpio";
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		interrupt-parent = <&tb10x_ictl>;
+		interrupts = <27 2>;
+		reg = <0xFF140000 0x1000>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		abilis,ngpio = <3>;
+		gpio-ranges = <&iomux 0 0 0>;
+		gpio-ranges-group-names = "gpioa_pins";
+	};